HELLO everyone, i have a big problem in my phone LG OPTIMUS L3 E400
i use KDZ UPDATER and update my phone with wrong kdz file and now My phone does not work and not allowed to go to EMERGENCY MODE
I hope you will give me the solution to back my phone and thank you guys and i will wait for the answer....
Go to CWM Mode (PRESS Vol + and Power button and Home button simultaneously ) after getting into CWM mode connect your phone to Computer then run KDZ updater. In KDZ screen (Phone Mode) select Emergency instead of Diag then load your KDZ file.
hassane159 said:
HELLO everyone, i have a big problem in my phone LG OPTIMUS L3 E400
i use KDZ UPDATER and update my phone with wrong kdz file and now My phone does not work and not allowed to go to EMERGENCY MODE
I hope you will give me the solution to back my phone and thank you guys and i will wait for the answer....
Click to expand...
Click to collapse
Try using lg mobile support tool which you may download from any google sites. Make sure you have good internet connection when using the tool.
Sent from my LG-E425 using XDA Free mobile app
Related
hello all, i want to flash my lg l7 and i cant go to emergency mode :crying:
i pressed volume up + power button but nothing it just vibrates NO SIGN OF EMERGENCY MODE! please help me ,thank you!
Marke321 said:
hello all, i want to flash my lg l7 and i cant go to emergency mode :crying:
i pressed volume up + power button but nothing it just vibrates NO SIGN OF EMERGENCY MODE! please help me ,thank you!
Click to expand...
Click to collapse
ive managed to enter to emergency mode but now after reset phone step im getting error :WParam : 100 LParam : 2 and nothing... please help!
Then try launch software with type 3GQCT and phone mode CS emergency. Next, connect phone via cable usb without battery. Maybe reinstall kdz and drivers.
Poland_Developers said:
Then try launch software with type 3GQCT and phone mode CS emergency. Next, connect phone via cable usb without battery. Maybe reinstall kdz and drivers.
Click to expand...
Click to collapse
ok , i will try it thanks
Marke321 said:
ok , i will try it thanks
Click to expand...
Click to collapse
doesnt work....
What version had you? ICS or JB?
Poland_Developers said:
What version had you? ICS or JB?
Click to expand...
Click to collapse
Ok first i had ICS then i got jb cm10 it worked normally for couple days ,but when ive downloaded chainfire 3D and installed drivers it doesnt boot! then ive tryed to flash it
**** IT! same error.... now i will try different version of kernel.
I have lg l7 p705 and same problem i stuck on EMERGANCE MODE
If you currently have a Jelly Bean then install Jelly Bean.
Uninstall KDZ Flash Tool + drivers and install again.
1.Install drivers.
2.Install KDZ Flash Tool.
3.Turn off your phone. Connect phone via cable USB and pressing volume + and power (without battery). On screen shows emergency mode with yellow background.
4.Open KDZ and:
a) 3GQCT + EMERGENCY
b) 3GQCT + CS EMERGENCY
Disaster recovery software for LGMobile Support Tool rather not work. But you can check it.
If you have P705 then install for P705:
-Hong Kong or Taiwan: http://lg-phone-firmware.com/index.php?id_mod=13
thanks i will try it
it doesnt work , please help, im losing hope
Hi,
try this it worked for me:
turn the phone off
remove battery
press "volume up"
connect to PC via USB
this is the only way to enbale emergency mode which worked for me
Adam
plenty guides on how to unbrick
Including this one :
Marke321 said:
it doesnt work , please help, im losing hope
Click to expand...
Click to collapse
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
Enjoy your NEW OLD phone
found here http://forum.xda-developers.com/showpost.php?p=52241564&postcount=19
I am on cm 10 and i want to go back to v20d official non-rooted.
I try to flash it but kdz flasher and lg mobile suport tool dont recognize my p700. PC recognizes it and i can access it normally but when i start kdz nothing. Please help as soon as possible, i dont have network on cm10 ( and its not about v10 baseband )
you must boot your phone to emergency mode (holding volume up+power+connecting to pc if i'm right) than choose in kdz updater: emergency mode and then just launch software update
Sent from my LG-P700 using xda premium
enter in download mode ( volume + and - holding and after plug in the usb which is already connected to the pc) and anfter install the sof with kdz updater
acheron350 said:
I am on cm 10 and i want to go back to v20d official non-rooted.
I try to flash it but kdz flasher and lg mobile suport tool dont recognize my p700. PC recognizes it and i can access it normally but when i start kdz nothing. Please help as soon as possible, i dont have network on cm10 ( and its not about v10 baseband )
Click to expand...
Click to collapse
Did you try doing it in emergency mode?
ubuntuh said:
you must boot your phone to emergency mode (holding volume up+power+connecting to pc if i'm right) than choose in kdz updater: emergency mode and then just launch software update
Sent from my LG-P700 using xda premium
Click to expand...
Click to collapse
It's volume up + volume down + power button.
hi i phone lg g2 d802 was bricked after using lg support tool . i used upgrade recovery tool and its had an erorn in the middle of the process ...and now my phone when i am trying to make it turn on its logo is show on and after that nothing ... i cant do download mode and recovery mode.... i need your help please
arielkh1 said:
hi i phone lg g2 d802 was bricked after using lg support tool . i used upgrade recovery tool and its had an erorn in the middle of the process ...and now my phone when i am trying to make it turn on its logo is show on and after that nothing ... i cant do download mode and recovery mode.... i need your help please
Click to expand...
Click to collapse
Go back to General section, you will see there is a thread named: Back to Stock.. Use it to unbrick phone , its pretty simple...
hey guys this is my 1st post ever here. i have a problem with my lg g2 d802. i update the firmware after update when its restart its stuck on lg logo.. i clean all the partition .. now its not turning on when i connect mobile with laptop it detect mobile as qshusb_bulk mode with yellow sign on top.. dont know what to do any have solutions?plz help thanx :crying:
Hsm768 said:
hey guys this is my 1st post ever here. i have a problem with my lg g2 d802. i update the firmware after update when its restart its stuck on lg logo.. i clean all the partition .. now its not turning on when i connect mobile with laptop it detect mobile as qshusb_bulk mode with yellow sign on top.. dont know what to do any have solutions?plz help thanx :crying:
Click to expand...
Click to collapse
to fix that can you enter download mode. press vol up connect usb then does it go to download mode. with metter bar on bottom? is yes try the tot method to go back to stock using flash tools..
for that click on my signature where it ssays HERE for guides.. then tell us what you did so it doesnt happened again.. what wxactly did you do.?
Hi all,
Recently had some trouble where I flashed a H870 firmware onto my G600L LG G6. After hours of frustration and effort, I finally found the solution.
1. Put LG G6 into Download Mode (Hold Up Button when powered off, then plug in USB cable)
2. Download and Run LG Bridge
3. Go to software update - the software will detect the correct model and download the correct firmware file and install it
JD6750 said:
Hi all,
Recently had some trouble where I flashed a H870 firmware onto my G600L LG G6. After hours of frustration and effort, I finally found the solution.
1. Put LG G6 into Download Mode (Hold Up Button when powered off, then plug in USB cable)
2. Download and Run LG Bridge
3. Go to software update - the software will detect the correct model and download the correct firmware file and install it
Click to expand...
Click to collapse
Can I up the rom H873 for G600LP? And can fix by your way?
Well, this is a standard "fix"...
Everyone should know how to do that before even flash anything. Nothing new, but is nice to see that you have saved a G6...
Do you know how to solve that no sound bug in lg g6 g600l....
JD6750 said:
Hi all,
Recently had some trouble where I flashed a H870 firmware onto my G600L LG G6. After hours of frustration and effort, I finally found the solution.
1. Put LG G6 into Download Mode (Hold Up Button when powered off, then plug in USB cable)
2. Download and Run LG Bridge
3. Go to software update - the software will detect the correct model and download the correct firmware file and install it
Click to expand...
Click to collapse
Hy sir my lgg6 g600l running on oreo had some issues it restarts and go to ded silent and after spending some time with it it got fixed after the restart. I dont kow what the issue is not using any app at all. it does even after factory reset. any help would be appriciated. also i want root access .........
lg g6 g600l
hello team of experts i have lg g6 g600l which is running android 8 orio i ried to upgrade to 9pie on lgup but i did a mistake of did not enter my phone in download mode thats why the upgrade procces is not succesfull and now i am facing an error on lg up
0x81000302, please use latest DLL LAF Protocol version is not match DLL=150423472 Device=201969696. so what to do now to get back my phone
ab63 said:
hello team of experts i have lg g6 g600l which is running android 8 orio i ried to upgrade to 9pie on lgup but i did a mistake of did not enter my phone in download mode thats why the upgrade procces is not succesfull and now i am facing an error on lg up
0x81000302, please use latest DLL LAF Protocol version is not match DLL=150423472 Device=201969696. so what to do now to get back my phone
Click to expand...
Click to collapse
You need to find correct DLL file. Search xda forum or google
is some one have the right DLL files for lg g6 600l
Please Help, my G6 not detected in Device manager in Download mode i have installed all necessary drivers but not detected. thanks.
charledave said:
Please Help, my G6 not detected in Device manager in Download mode i have installed all necessary drivers but not detected. thanks.
Click to expand...
Click to collapse
make sure u use a good cable and also make sure you have the latest google usb drivers from android studio
Download lgup dll for g8 and lg up. New protocols inside of dll.