Database Users

[Q] Flash counter warrenty

Hey there
Will using TriangleAway to reset the counter and flashing to stock with ODIN definitely mean that service people will not be able to tell the phone has been modified at all?

Its possible there's a hidden counter but what we can't see we can't guard about...
I would also suggest to hard reset(factory reset in options) completely to reset all statuses..

ultramag69 said:
Its possible there's a hidden counter but what we can't see we can't guard about...
I would also suggest to hard reset(factory reset in options) completely to reset all statuses..
Click to expand...
Click to collapse
Also because the s4 does not show a triangle on the download mode screen, Is there any way to check the counter without using triangleaway? and how do they check it in service

yabanize said:
Hey there
Will using TriangleAway to reset the counter and flashing to stock with ODIN definitely mean that service people will not be able to tell the phone has been modified at all?
Click to expand...
Click to collapse
If you simply boot in to "Download mode" the phone will show if you have an official or custom binary.... there is no counter...just says custom or official. ..so just do a firmware flash via odin and then a hard reset (optional) ... then check your binary via download mode...I'm sure it'll be reset to official
Good luck hope this helped

Imgoing to test it
Thanks Bro....
:good::good::good::good:

Also in settings go to About>Status and at the bottom it will show either "Official" or "Custom"... This is the bugger that's hard to change...

anuradhakelum said:
Thanks Bro....
:good::good::good::good:
Click to expand...
Click to collapse
Let us know if it worked )

sadeshmagic said:
If you simply boot in to "Download mode" the phone will show if you have an official or custom binary.... there is no counter...just says custom or official. ..so just do a firmware flash via odin and then a hard reset (optional) ... then check your binary via download mode...I'm sure it'll be reset to official
Good luck hope this helped
Click to expand...
Click to collapse
Im pretty sure there is a counter, It shows up in the triangleaway app

You have to do it this way.
1. Make sure you have a stock Samsung kernel and recovery (triangle away needs it to work on the s4).
- It may be easiest to flash stock firmware and then root again.
2. Once you have stock kernel and recovery and are rooted you can run triangle away. Make sure you follow the instructions carefully as it's a different procedure from older devices.
3. Flash stock firmware that your phone came with. I've discovered the hard way that Samsung service centres match the serial number to the firmware version as another means of checking for software modification.
4. Factory reset.
If you've done everything correctly you'll have official binary/status normal in download mode.
I've done this procedure myself and can confirm it's 100% working.
-- Sent from the mighty Note 2 --

[Q] Problem with ROOT, ROM and Recovery

Hi,
I was in doubt between doing or not doing the ROOT in my Galaxy S4 4G (GT-I9505)...
But I tried to start doing it.
I asked a friend who had already made it on his device!
At first he tried to install the recovery, so I would not lose my S4.
He used the Odin as he did for himself, but it faild. So I gave up doing te ROOT and we stopped.
Ok then, but today I looked for an upgrade original from Samsung on my device. But it said:
"Your device was modified. Upgrades are not available."
What can I do now?? I need to reset it to the original form or finish the ROOT successfully.
And I can't even put my device on recovery mode! It fails.
Please, help me!
I don't know what to do and this is my first post.
Ps.: out of this problem, my device is functioning normally.
Thank you!

GT-13 said:
Hi,
I was in doubt between doing or not doing the ROOT in my Galaxy S4 4G (GT-I9505)...
But I tried to start doing it.
I asked a friend who had already made it on his device!
At first he tried to install the recovery, so I would not lose my S4.
He used the Odin as he did for himself, but it faild. So I gave up doing te ROOT and we stopped.
Ok then, but today I looked for an upgrade original from Samsung on my device. But it said:
"Your device was modified. Upgrades are not available."
What can I do now?? I need to reset it to the original form or finish the ROOT successfully.
And I can't even put my device on recovery mode! It fails.
Please, help me!
I don't know what to do and this is my first post.
Ps.: out of this problem, my device is functioning normally.
Thank you!
Click to expand...
Click to collapse
Do you need root, is there something you can`t do without root atm or do you want to remove useless/unneeded stuff?
Better read up about rooting, flashing, recovery`s, roms and Odin so you`ll know what the (dis)advantages, risks and benefits are before you get into trouble
Do the following for now:
1. Download CF Auto Root from here http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip and extract it once with 7-zip.
2. Download Odin 3.04 http://forum.xda-developers.com/attachment.php?attachmentid=1168422&d=1341114468.
3.Enable usb debugging and disable Kies (also in windows task manager)
4. Place the extracted CF Root md5 file in Odin in the PDA section.
5. Put he phone in downloadmode (turn off the phone and then press volume down first and then the power button)
6. Connect to pc and and press start if you see ID;COM light up and you see a com number.
Reboot and you have root. Also install Busybox from Google Play.

gee2012 said:
Do you need root, is there something you can`t do without root atm or do you want to remove useless/unneeded stuff?
Better read up about rooting, flashing, recovery`s, roms and Odin so you`ll know what the (dis)advantages, risks and benefits are before you get into trouble
Click to expand...
Click to collapse
By now I just need to get my normal Rom to recieve Samsung's upgrades!
What can I do to reverse it!?
I thought I did nothing, because it faild, but something happened...
And now I cant put on recovery mode!
I'm afraid to do anything!
Can I undo all of these and have my normal original rom without root?
and if I reset it, will I lose all my stuff?
It says on the "about":
"Device's Status: personalize"
It doesnt say its modified!
but when I look for upgrade it says...

GT-13 said:
By now I just need to get my normal Rom to recieve Samsung's upgrades!
What can I do to reverse it!?
I thought I did nothing, because it faild, but something happened...
And now I cant put on recovery mode!
I'm afraid to do anything!
Can I undo all of these and have my normal original rom without root?
and if I reset it, will I lose all my stuff?
It says on the "about":
"Device's Status: personalize"
It doesnt say its modified!
but when I look for upgrade it says...
Click to expand...
Click to collapse
Do as said in the post above first. Then install Triangle Away and use that to reset the counter, when its done go straight to downloadmode and reflash the rom you have now with Odin 3.04, after it boots do a data factory reset and you`re fully stock with everything Official.

gee2012 said:
Do as said in the post above first. Then install Triangle Away and use that to reset the counter, when its done go straight to downloadmode and reflash the rom you have now, after it boots do a data factory reset and you`re fully stock with everything Official.
Click to expand...
Click to collapse
GT-13 said:
By now I just need to get my normal Rom to recieve Samsung's upgrades!
What can I do to reverse it!?
I thought I did nothing, because it faild, but something happened...
And now I cant put on recovery mode!
I'm afraid to do anything!
Can I undo all of these and have my normal original rom without root?
and if I reset it, will I lose all my stuff?
It says on the "about":
"Device's Status: personalize"
It doesnt say its modified!
but when I look for upgrade it says...
Click to expand...
Click to collapse
Yes, you can go back.
The easiest way is to flash a stock ROM via Odin, search for the ROM here: http://forum.xda-developers.com/showthread.php?t=2252855 and follow the instructions.
Cheers.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

soyusado said:
Yes, you can go back.
The easiest way is to flash a stock ROM via Odin, search for the ROM here: http://forum.xda-developers.com/showthread.php?t=2252855 and follow the instructions.
Cheers.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
If I do that, will I lose all my stuff!? data of apps or something like that?

Yes Backup all important files first.
Sent from my GT-I9505 using xda premium

gee2012 said:
Yes Backup all important files first.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
Thank you very much!!! :laugh:
I just have one question now:
what does the Busybox do and what should I use ir for???

GT-13 said:
Thank you very much!!! :laugh:
I just have one question now:
what does the Busybox do and what should I use ir for???
Click to expand...
Click to collapse
Busybox http://en.wikipedia.org/wiki/BusyBox.

[Q] Confused about my specific device

Heya guys,
I've read through so many websites and forum posts but always when I think I have found the right thing for me, the model number, baseband version and/or build number varies...
All I want to do is root my phone. If there's a safe way to do this without tripping that KNOX whatever, that would be great but not even the most important to me.
And if it is possible I would also like to get Android 4.4.4 installed. Strangely, my phone says it is up to date (4.4.2) but I'm seeing people having 4.4.4 on theirs...
If there's something like a pack to get both, the update and the root, that would be mint!
Either way, I would be very thankful if someone could point me to a place where my exact device could get its appropriate files.
Model number: GT-I9301I
Baseband version: I9301IXXUANF2
Build number: KOT49H.I9301IXCUANJ4

you have the gt-i9301i so latest version for your device is 4.4.2 , but 4.4.4 is available for dual sim variant gt-i9300i you can root it i'll post the link below and navigate through the android devloppement section and find a rom that suits you then install it
link for root : http://forum.xda-developers.com/gal...overy-t-r-p-samsung-galaxy-s3-neo-gt-t2906840

Heya, thanks for the answer!
Ah, so there's also a dual sim variant. Mean that only they get the 4.4.4 update
So, on that link you gave me... do I need that stuff in the first post or is it enough for me to load and process the stuff in the second post (under 2nd Method I guess?)?

you choose which method you want to use then you're good to go

Yeah, but lets say I choose that "2nd Method ( Odin method )" - do I ALSO need that stuff from the first post (TWRP) or is that not needed then?

no just from 2nd post (odin mode)

Maximus0415 said:
no just from 2nd post (odin mode)
Click to expand...
Click to collapse
Wuaaah, when I go into download mode, it says "Product Name: GT-i9300i"
Now which one is right? O_O
Also, are you sure the second post stuff is all I need? It looks like all I'm getting there is a new recovery, it doesn't say anything about root...?

Ego_Bizarro said:
Wuaaah, when I go into download mode, it says "Product Name: GT-i9300i"
Now which one is right? O_O
Also, are you sure the second post stuff is all I need? It looks like all I'm getting there is a new recovery, it doesn't say anything about root...?
Click to expand...
Click to collapse
look dude download recovery.tar and the 2 zips supersu and knox removal then put them in your phone then put recovery.tar on odin then got to download mode on your phone then plug it to your computer then click start after it's done boot in recovery (lock key + home key + volume up key ) then flash the two zips and you're done mate

Maximus0415 said:
look dude download recovery.tar and the 2 zips supersu and knox removal then put them in your phone then put recovery.tar on odin then got to download mode on your phone then plug it to your computer then click start after it's done boot in recovery (lock key + home key + volume up key ) then flash the two zips and you're done mate
Click to expand...
Click to collapse
So I do need the two zips from the first post, you didn't say that before
I'm still confused, though, about the download mode telling me my device is a GT-i9300i. Is that just a bug or something?

Check about device

TotalErikas said:
Check about device
Click to expand...
Click to collapse
Yeah, there it says "GT-I9301I", that's why I'm confused. I don't know which is right.

Ego_Bizarro said:
Yeah, there it says "GT-I9301I", that's why I'm confused. I don't know which is right.
Click to expand...
Click to collapse
You have the i9301i then. Trust me.

Alright, thanks! I'll try this then... I hope there won't be any brickage O_O

Yay, everything worked as it should.
Since I applied the KNOX removal, is it also necessary to use TriangleAway?

Ego_Bizarro said:
Yay, everything worked as it should.
Since I applied the KNOX removal, is it also necessary to use TriangleAway?
Click to expand...
Click to collapse
No . I personally rooted my device with cf auto root. After I launched the SuperSU it removed KNOX

Hm, I think you misunderstood my question. KNOX seems to be removed already.
But there's still that other thing with the yellow triangle (years ago, one needed 'Triangle Away' to remove it), right? Or has Samsung given up on that when they introduced KNOX?

Ego_Bizarro said:
Hm, I think you misunderstood my question. KNOX seems to be removed already.
But there's still that other thing with the yellow triangle (years ago, one needed 'Triangle Away' to remove it), right? Or has Samsung given up on that when they introduced KNOX?
Click to expand...
Click to collapse
Yeah, considering I have never heard about it, it probably doesn't exist anymore.

Was rooted now I'm on stock

Recently had my s7 edge rooted with the guide that says root and knox still good.
Just used the part of the guide where it says unroot I'm back on stock firmware but now I can't take an Ota it fails and I can't use samsung pay. I was wondering if I did something wrong or there is a step in missed and need to do ?
Thanks in advance for any and all help.

You have to Odin a stock firmware.

That's what I did

What does Settings - About phone - Status - "Phone status" say? It should say "Official".
Also booting to Download Mode (phone off, hold Power/Vol Down/Home at same time, then press Vol Up when prompted) to confirm that "System Status" should read "Samsung Official" or "Official".
You can also install this app, KNOX Status Samsung, and it'll tell you your Knox Status.
If Knox is not valid, you will not be able to use Samsung Pay, and once Knox is tripped, there is no undoing that.

Only reason I can't be on root either is because even with all the power saving functions I've had enabled through root, it didn't have as good battery saving as stock unrooted.
But yeah, try to make sure you didn't do something to trip KNOX.

Yeah that's the odd thing I downloaded the knox checker and it says the warranty is valid

RMarkwald said:
What does Settings - About phone - Status - "Phone status" say? It should say "Official".
Also booting to Download Mode (phone off, hold Power/Vol Down/Home at same time, then press Vol Up when prompted) to confirm that "System Status" should read "Samsung Official" or "Official".
You can also install this app, KNOX Status Samsung, and it'll tell you your Knox Status.
If Knox is not valid, you will not be able to use Samsung Pay, and once Knox is tripped, there is no undoing that.
Click to expand...
Click to collapse
Yeah I don't know what I did wrong knox app says my warranty is valid and both of what to u told me to check say offacial and Samsung official so I truly don't know what the heck I did wrong

Yup just tried one more time taking a system update I'm able to do but it fails in the installation process and when I try to use samsung pay I get access denied.

JSDragon said:
Yup just tried one more time taking a system update I'm able to do but it fails in the installation process and when I try to use samsung pay I get access denied.
Click to expand...
Click to collapse
I'm not seeing anything in the Verizon Root Guide w/ Knox Good where it says anything about unrooting, so I assume you flashed the official phone firmware via ODIN? What version firmware did you flash? Did you get the stock firmware files from this thread here?

My apologies this was the thread that I used for unroot
http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039

JSDragon said:
My apologies this was the thread that I used for unroot
http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
Click to expand...
Click to collapse
Does your baseband version match your build number? You only need to look at the last 3 digits. If they don't match then you flashed the wrong update file onto your phone.

RMarkwald said:
What does Settings - About phone - Status - "Phone status" say? It should say "Official".
Also booting to Download Mode (phone off, hold Power/Vol Down/Home at same time, then press Vol Up when prompted) to confirm that "System Status" should read "Samsung Official" or "Official".
You can also install this app, KNOX Status Samsung, and it'll tell you your Knox Status.
If Knox is not valid, you will not be able to use Samsung Pay, and once Knox is tripped, there is no undoing that.
Click to expand...
Click to collapse
Outbreak444 said:
Does your baseband version match your build number? You only need to look at the last 3 digits. If they don't match then you flashed the wrong update file onto your phone.
Click to expand...
Click to collapse
Just looked they do match up.

JSDragon said:
Just looked they do match up.
Click to expand...
Click to collapse
Install this app here:
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Check General, CSC, and Firmware and make sure it all matches up similar to mine.
For example, mine says:
General:
Manufacturer/Brand:
samsung / Verizon
Phone Model:
SM-G935V
Device Type/Product Name:
hero2qlte
Knox Warranty Void:
0x0
CSC Code:
Firmware's CSC Code/Active CSC Code:
VZW
Mobile Operator:
Verizon Wireless
Firmware:
Bootloader Version:
G935VVRU2APB5
PDA Version:
G935VVRU2APB5 / G935VVRU2APB5_PB6
CSC Version:
G935VVZW2APB5
Baseband Version:
G935VVRU2APB5

Here you go this might work I found this on the regular s7 forum........
For those of you who want to go back to stock and are having trouble with any updates i have found a fix.
(only do this if u want to go 100% back to stock and want to update to current software and future updated software. If u want to stay on PG2 software and never update, then ignore this post)
In the instructions on how to flash back to stock, the OP only included 3 files u had to flash using Odin (AP, CP and CSC). follow those steps up to the point where everything is flashed back to stock and your phone has rebooted to home screen. After that,power off your phone and restart to download screen (hold home, power button and volume down at same time)
once u are booted to the download mode screen, open odin and select BL and find the BL file that came with your stock folder. Once its loaded, hit start and let Odin flash it. Your phone will reboot and you will be able to update your phone to any new software released.
I had a problem trying to update to PG1 after reflashing to stock. My update would crash at 32%. This will fix that issue.

live2playloud said:
Here you go this might work I found this on the regular s7 forum........
For those of you who want to go back to stock and are having trouble with any updates i have found a fix.
(only do this if u want to go 100% back to stock and want to update to current software and future updated software. If u want to stay on PG2 software and never update, then ignore this post)
In the instructions on how to flash back to stock, the OP only included 3 files u had to flash using Odin (AP, CP and CSC). follow those steps up to the point where everything is flashed back to stock and your phone has rebooted to home screen. After that,power off your phone and restart to download screen (hold home, power button and volume down at same time)
once u are booted to the download mode screen, open odin and select BL and find the BL file that came with your stock folder. Once its loaded, hit start and let Odin flash it. Your phone will reboot and you will be able to update your phone to any new software released.
I had a problem trying to update to PG1 after reflashing to stock. My update would crash at 32%. This will fix that issue.
Click to expand...
Click to collapse
I will try this and report back thank you for your time.

live2playloud said:
Here you go this might work I found this on the regular s7 forum........
For those of you who want to go back to stock and are having trouble with any updates i have found a fix.
(only do this if u want to go 100% back to stock and want to update to current software and future updated software. If u want to stay on PG2 software and never update, then ignore this post)
In the instructions on how to flash back to stock, the OP only included 3 files u had to flash using Odin (AP, CP and CSC). follow those steps up to the point where everything is flashed back to stock and your phone has rebooted to home screen. After that,power off your phone and restart to download screen (hold home, power button and volume down at same time)
once u are booted to the download mode screen, open odin and select BL and find the BL file that came with your stock folder. Once its loaded, hit start and let Odin flash it. Your phone will reboot and you will be able to update your phone to any new software released.
I had a problem trying to update to PG1 after reflashing to stock. My update would crash at 32%. This will fix that issue.
Click to expand...
Click to collapse
Live2playloud you are awesome ! it worked perfectly I can now take system updates and samsung pay is back working perfectly ! Thank you very much for your time!!!!

JSDragon said:
Live2playloud you are awesome ! it worked perfectly I can now take system updates and samsung pay is back working perfectly ! Thank you very much for your time!!!!
Click to expand...
Click to collapse
Glad to hear but just so you know I did not write this is just found it and provided it to you but I am glad your up and running

live2playloud said:
Glad to hear but just so you know I did not write this is just found it and provided it to you but I am glad your up and running
Click to expand...
Click to collapse
That is ok for me you were still a huge help and I really appreciate it.

reset counter the KNOX

Hello my brothers,
it was the first post me here at XDA
will give you the original file for the reset counter the KNOX for note3 n900 only.
and I will raise it on the MEGA.
did you have to do is download and run ODIN program file and enter the device on the status of the DOWNLOADMODE and then you connect the device to USB and choose to reset the counter file after completion remove the battery and reinsert then enter into the DOWNLOADMODE once again and then chose any Software installed and want to be here have restored security
ALRA7AL.SYRIA 😉
Greetings to you if you like this topic only thank enough for me
https://mega.nz/#!VYV3xCzb!_XOkBLULxoAqO73ll2FR_o1I04We2iwCEAKeUCYkeHU

alra7al.syria said:
Hello my brothers,
it was the first post me here at XDA
will give you the original file for the reset counter the KNOX for note3 n900 only.
and I will raise it on the MEGA.
did you have to do is download and run ODIN program file and enter the device on the status of the DOWNLOADMODE and then you connect the device to USB and choose to reset the counter file after completion remove the battery and reinsert then enter into the DOWNLOADMODE once again and then chose any Software installed and want to be here have restored security
ALRA7AL.SYRIA ?
Greetings to you if you like this topic only thank enough for me
https://mega.nz/#!VYV3xCzb!_XOkBLULxoAqO73ll2FR_o1I04We2iwCEAKeUCYkeHU
Click to expand...
Click to collapse
There are already two methods to reset knox.
No point in opening another thread.
Reporting via N910G.

yashthemw said:
There are already two methods to reset knox.
No point in opening another thread.
Reporting via N910G.
Click to expand...
Click to collapse
thank bro i was reported
Sent from my SM-N900 using XDA-Developers mobile app

alra7al.syria said:
Hello my brothers,
it was the first post me here at XDA
will give you the original file for the reset counter the KNOX for note3 n900 only.
and I will raise it on the MEGA.
did you have to do is download and run ODIN program file and enter the device on the status of the DOWNLOADMODE and then you connect the device to USB and choose to reset the counter file after completion remove the battery and reinsert then enter into the DOWNLOADMODE once again and then chose any Software installed and want to be here have restored security
ALRA7AL.SYRIA 😉
Greetings to you if you like this topic only thank enough for me
https://mega.nz/#!VYV3xCzb!_XOkBLULxoAqO73ll2FR_o1I04We2iwCEAKeUCYkeHU
Click to expand...
Click to collapse
Also note 3 is too old and will not get any updates. Notb many would be interested in resetting the Knox.

Does this method actually work, my counter is 0x1, i didnt think it could be reset on the N9005??

gazza35 said:
Does this method actually work, my counter is 0x1, i didnt think it could be reset on the N9005??
Click to expand...
Click to collapse
Read post one .
will give you the original file for the reset counter the KNOX for note3 n900 only.

JJEgan said:
Read post one .
will give you the original file for the reset counter the KNOX for note3 n900 only.
Click to expand...
Click to collapse
Ah ok i see, not the N9005, cheers Anyway.

ok bro
gazza35 said:
Does this method actually work, my counter is 0x1, i didnt think it could be reset on the N9005??
Click to expand...
Click to collapse
us this link
http://forum.xda-developers.com/gal...t-guide-note-3-lte-sm-n9005-lollipop-t3093183

alra7al.syria said:
us this link
http://forum.xda-developers.com/gal...t-guide-note-3-lte-sm-n9005-lollipop-t3093183
Click to expand...
Click to collapse
Yer i have root already and Phronesis installed, unfortunatley i had tripped knox, probably when i installed twrp, but as of yet i dont think there is anyway to reset it.

Unless the phone has warranty or you want to sell the phone, I don't think resetting the Knox counter means much as a tripped Knox counter has never caused me any problems with the phone using stock or custom ROMs.

audit13 said:
Unless the phone has warranty or you want to sell the phone, I don't think resetting the Knox counter means much as a tripped Knox counter has never caused me any problems with the phone using stock or custom ROMs.
Click to expand...
Click to collapse
Yer it was just for re-sale purposes. just to make sure everything as it should be, but i know, means nothing really, just samsungs way of getting out of honouring warranty, interestingly, i once owned a galaxy s2, and purchased a USB JIG, years ago, i then had a s3, s4 and the jig wouldnt work on them so i threw it in a draw.
The other day i came across the jig, and thought id try it on my Note which reported the binary as custom and the counter as 0x1, Upon turning off my Note 3 and inserting the jig into the usb socket, it did indeed fire my phone straight into download mode, although my phone counter is still 0x1, it has indeed changed the binary from custom to official.
Lol, didnt think it would do anything but there ya go, Partial success.

Just Flashed today...
I got my device soft-brick after flashing it,
when i power the phone up, it doesn't boot into system, but showing..
Error Code : [ RST_STAT = 0X400 ]
POWER RESET or
UNKNOWN
UPLOAD MODE
Pls, did somebody experience it?...
---------- Post added at 09:25 AM ---------- Previous post was at 09:15 AM ----------
Thank a lot guys..
The problem is solved..
I have got my device back.