Database Users

Odin Failure to flash CWM Galaxy S4 ATT

Hey guys, I'm having a little trouble getting custom roms installed on my Galaxy S4. Here is a little information about the phone
Carrier: ATT
Model: Galaxy SGH - 1337
Android version 4.2.2
After spending a few hours here on XDA both searching the site and posting on the help thread, I've come to no solution.
So yesterday due to a level of frustration with the amount of bloat that comes pre-installed on the Samsung devices, I decided I would try to set up a custom rom. I've used the Towelroot site to root the device (enable superuser access and disable Knox,) But wasn't able to install CWM. I've downloaded and installed the CWM Rom Manager and inside that app is an option to install CWM manually. Of course it isn't that easy, because although it says it's installed the recovery, when I boot into recover mode, it is still the stock android recovery mode.
So I turned to Odin. Specifically Odin 3.09. This is where the problems start. I start my phone and enable download mode. The phone is recognized by Odin and I choose the CWM file I have (recover-clockwork-touch-6.0.4.4-jflteatt.tar.) I press start and the process begins, but before long I see FAIL! in red at the top
The message box reads as follows:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I've tried using three different usb cables (including the stock s4 cable included in the packaging) and several different ports of course to no avail.
What exactly does FAIL! (Auth) mean? That seems to be the point where it goes south.
Could I be flashing a bad file? Is the CWM.tar.md5 not the correct file to flash?
I've tried several different versions of both Odin and CWM. Is there something else that I have to do before this step? I've read a lot about the S4 being a pain to load custom roms onto.
Anyways if anyone has a fix to this particular solution then let me know. Otherwise I'll take really any other viable solution to enabling custom roms on the Galaxy S4 for ATT. I'd like this to be a thread that people see when they google search it, so I won't give up and I'll be sure to post with the best process that I can find!

Your boot loader is locked. So, no custom recovery and kernel. The only working recovery we have is safestrap.
More info - http://forum.xda-developers.com/showthread.php?t=2616221

misterbreadcrum said:
Hey guys, I'm having a little trouble getting custom roms installed on my Galaxy S4. Here is a little information about the phone
Carrier: ATT
Model: Galaxy SGH - 1337
Android version 4.2.2!
Click to expand...
Click to collapse
I see this above but need more info... Are you completely stock right now?
You will NOT be able to Odin any CWM to this phone. See below for other brief info for you to look into for CWM/TWRPand how to install IF on MDB or MDL firmware. Or if MF3 Your ONLY OPTION is Safestrap and limited to TouchWiz based Roms.
If you are then when you go to Settings/More/About Phone what does your Baseband say? Does it end with MDB, MDL, MF3?
IF it ends with MDB or MDL the look up Casual Root with TWRP. This will allow you to flash ANY Roms.
IF it ends with MF3 Then look up Safestrap for MF3. This will allow you to flash Safestrap versions of Roms.
ALSO IF it is MF3 you might as well update to MK2 or NB1 then use their safestrap version for root
Sent fron I337 Red BadAss Themed ShoStock 7.0

Help me (CM 12 and Gapps)

Hi
i have installed CM12 nightlies on GT-i9505. it's installed successfully. it's very cool rom
but when i try to flash (gapps mini modular)it abort from install and error [status1]. in the gapps for lollipop say that your CWM version not support this gapps version flashing (6.0.4.7).
now, i tried to flash twrp latest version on device in downloading mode but i have error in this.
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
and not happening.
Q2:
how can i root my device in android 5.0.2?
please help me guys!

vahidha7 said:
Hi
i have installed CM12 nightlies on GT-i9505. it's installed successfully. it's very cool rom
but when i try to flash (gapps mini modular)it abort from install and error [status1]. in the gapps for lollipop say that your CWM version not support this gapps version flashing (6.0.4.7).
now, i tried to flash twrp latest version on device in downloading mode but i have error in this.
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
and not happening.
Q2:
how can i root my device in android 5.0.2?
please help me guys!
Click to expand...
Click to collapse
Those ROMs are already rooted as far as I know.
Maybe try a different lollipop rom?
Google Play Edition here: http://forum.xda-developers.com/showthread.php?t=2557353
Resurrection Lollipop v5.2.8 here: http://forum.xda-developers.com/gal...-0-2-ressurection-lollipop-5-2-7dark-t2994283
Team UB rom here: http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-team-ub-rom-s4-jfltexx-t2985858
AntaresOne and Alucards24's optimized CM12 builds here: http://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/rom-cyanogenmod-12-t2943934
Take a look at those.
I, personally, use the Google Play Edition

Those ROMs are already rooted as far as I know.
Maybe try a different lollipop rom?
Google Play Edition here: http://forum.xda-developers.com/show....php?t=2557353
Resurrection Lollipop v5.2.8 here: http://forum.xda-developers.com/gala...7dark-t2994283
Team UB rom here: http://forum.xda-developers.com/gala...ltexx-t2985858
AntaresOne and Alucards24's optimized CM12 builds here: http://forum.xda-developers.com/gala...od-12-t2943934
Take a look at those.
I, personally, use the Google Play Edition
Click to expand...
Click to collapse
Thank you , but this cm version didn't had superSu app in main apps.(but i flash supersu after install rom after creat this tread)
-My problem Solved!-
i tried to install TWRP with odin but have same problem (there is no partion)
after that problem , find an application that can flash recovery and any img file without PC. it's available in playstore (flashify). this app is so awesome and have really easy wizard.
but when i was installed twrp , i couldn't flash Gapps. and i tried with another gapps about 2014 that signed with lollipop. it does't work successfully (last gapps(mini modular) doesn't install but this install successfully). but when i install another google app such Google play service and gmail and maps , gapps system get complete!
thanks every body!

[Q] HELP!!! How to root and install CWM on lollipop note 3 (n9005)?

can someone help me how to root n9005 lollipop version and how to install CWM to lollipop n9005? thanks....

Use Odin. pda.

kenny1991 said:
Use Odin. pda.
Click to expand...
Click to collapse
Can you please elaborate? I am a noob to the note 3 root on Lollipop. on the new Odin there is no PDA option, is there a newer up too date thread somewhere of how to do this please?
---------- Post added at 09:07 PM ---------- Previous post was at 08:36 PM ----------
Nico231995 said:
can someone help me how to root n9005 lollipop version and how to install CWM to lollipop n9005? thanks....
Click to expand...
Click to collapse
Did you get yours rooted? I need help getting mine done.

DevilsArc said:
Can you please elaborate? I am a noob to the note 3 root on Lollipop. on the new Odin there is no PDA option, is there a newer up too date thread somewhere of how to do this please?
---------- Post added at 09:07 PM ---------- Previous post was at 08:36 PM ----------
Did you get yours rooted? I need help getting mine done.
Click to expand...
Click to collapse
on laster Odin (V3.09 or v3.10)
PDA is AP
download the laster TWRP or phliztouch link for TWRP: http://www.techerrata.com/file/twrp2/hlte/openrecovery-twrp-2.8.3.0-hlte-4.4.img.tar
place in AP on odin and flash
And download the zip flashable by chanfire and flash on recovery http://download.chainfire.eu/644/SuperSU/BETA-SuperSU-v2.42.zip
done

And my phone is not the root
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
V3.7 I get the same error message.

ZeoN1907 said:
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
V3.7 I get the same error message.
Click to expand...
Click to collapse
I have flashing TWRP 2 times, it's work very well (odin 3.09)
I'm on GBNL8 too

Bruno saa said:
I have flashing TWRP 2 times, it's work very well (odin 3.09)
I'm on GBNL8 too
Click to expand...
Click to collapse
I'm so tired I'm sorry.
I wonder?
The email address you download Odin,
Can I get the address or the address you're TWRP version and download version or download supers? If possible?
You send them to a compressed file or via email?
I tried many ways but I'm having trouble.
My English is not good. Forgive me. Please.

Port USB
ZeoN1907 said:
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
V3.7 I get the same error message.
Click to expand...
Click to collapse
Hi,
I had the same problem and same message for a long time.
And one day i tried to do that with another usb port. It WORKED ! simple as that
Cheers

Re-partition operation failed Samsung Galaxy J5 (SM-J500FN)

HI, when I try to install new firmware on my galaxy j5 with odin with pda and file pit for repartition, I got this errors:
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010>
<ID:0/010>Re-Partition operazioni failed.
<OSM>All threads completed. (succeed 0 / fail 1)
Please, help me.

Seconded. Does anyone have a solution for this issue?

@Vincenzolt98 @Dionisis89
It's a custom PIT or stock one? From where you downloaded stock ROM?
When I flashed stock ROM I only had to put it at PDA ( AP for newer Odin versions). I think the repartition should be done automatically when is flashed stock ROM.
Try latest Odin version and also make sure that the PIT file is the correct one (can be for 8gb, 16gb for example).
I recommend you to use SamFirm program for downloading stock ROMs faster.
SamFirm: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 . Even if it's deprecated, it still works fine. The program is attached at attachments in that thread.

#Henkate said:
@Vincenzolt98 @Dionisis89
It's a custom PIT or stock one? From where you downloaded stock ROM?
When I flashed stock ROM I only had to put it at PDA ( AP for newer Odin versions). I think the repartition should be done automatically when is flashed stock ROM.
Try latest Odin version and also make sure that the PIT file is the correct one (can be for 8gb, 16gb for example).
I recommend you to use SamFirm program for downloading stock ROMs faster.
SamFirm: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 . Even if it's deprecated, it still works fine. The program is attached at attachments in that thread.
Click to expand...
Click to collapse
It should be the stock PIT. I don't remember where I downloaded it from but it appears to be the correct one. I don't know where the problem is.
The firmware corresponding to my J500FN's CSC is Austrian (ATO), so I downloaded it from that updato site.
The reason I went to find the PIT file in the first place is because flashing stock ROM via Odin failed. It showed this code (last 2 lines):
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
It had failed at this point, and I've tried flashing the 6.0.1 and 5.1.1 stock image, to no avail. Perhaps you have a solution for that instead?

Dionisis89 said:
It should be the stock PIT. I don't remember where I downloaded it from but it appears to be the correct one. I don't know where the problem is.
The firmware corresponding to my J500FN's CSC is Austrian (ATO), so I downloaded it from that updato site.
The reason I went to find the PIT file in the first place is because flashing stock ROM via Odin failed. It showed this code (last 2 lines):
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
It had failed at this point, and I've tried flashing the 6.0.1 and 5.1.1 stock image, to no avail. Perhaps you have a solution for that instead?
Click to expand...
Click to collapse
Regsrding hidden.img.ext4 error, try this: https://www.youtube.com/watch?v=2uTHilnRsWw. Credits to @pacower for sharing that video. Also try to use newer Odin version (I used 3.09 or so all the time though).
People confirmed that this video works, but here is a post/tip regarding that video: http://forum.xda-developers.com/showpost.php?p=69673728&postcount=10 .

#Henkate said:
Regsrding hidden.img.ext4 error, try this: https://www.youtube.com/watch?v=2uTHilnRsWw. Credits to @pacower for sharing that video. Also try to use newer Odin version (I used 3.09 or so all the time though).
People confirmed that this video works, but here is a post/tip regarding that video: http://forum.xda-developers.com/showpost.php?p=69673728&postcount=10 .
Click to expand...
Click to collapse
I've tried this method, but Odin shows me another error: MD5 error! binary is invalid .
And yes, I've tried removing the .md5 from the file name, but then Odin is stuck on file analysis forever. That happens on Odin v3.12. At version 3.11, it simply hangs after choosing that file. At version 3.09 (which also has the option of flashing a PIT file) it shows this:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea of what I could do? Maybe the PIT file I used isn't correct, after all? Where should I download it from?
---------- Post added at 01:43 PM ---------- Previous post was at 01:28 PM ----------
Hey bro, found the issue. Apparently the firmware I downloaded wasn't right and that's why it never went through with booting the hidden.img.ext4. The link you provided, however, made it happen! You saved my phone. Thanks a million!

Dionisis89 said:
I've tried this method, but Odin shows me another error: MD5 error! binary is invalid .
And yes, I've tried removing the .md5 from the file name, but then Odin is stuck on file analysis forever. That happens on Odin v3.12. At version 3.11, it simply hangs after choosing that file. At version 3.09 (which also has the option of flashing a PIT file) it shows this:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea of what I could do? Maybe the PIT file I used isn't correct, after all? Where should I download it from?
---------- Post added at 01:43 PM ---------- Previous post was at 01:28 PM ----------
Hey bro, found the issue. Apparently the firmware I downloaded wasn't right and that's why it never went through with booting the hidden.img.ext4. The link you provided, however, made it happen! You saved my phone. Thanks a million!
Click to expand...
Click to collapse
Did you try to flash it without PIT file?
Also, if you flashed TWRP before, then try to flash TWRP, then boot in TWRP recovery and wipe /system, /data, /cache and dalvik-cache. Then power off the phone, boot in download mode and try to flash again through Odin.
If you didn't flash TWRP before and you don't wanna lose warranty, then boot in stock recovery and wipe, but your internal memory will be wiped too.
I never used a PIT file when I flashed stock ROM.
EDIT:
Dionisis89 said:
Hey bro, found the issue. Apparently the firmware I downloaded wasn't right and that's why it never went through with booting the hidden.img.ext4. The link you provided, however, made it happen! You saved my phone. Thanks a million!
Click to expand...
Click to collapse
Oh. Nice
I'm glad I helped you.

#Henkate said:
Did you try to flash it without PIT file?
Also, if you flashed TWRP before, then try to flash TWRP, then boot in TWRP recovery and wipe /system, /data, /cache and dalvik-cache. Then power off the phone, boot in download mode and try to flash again through Odin.
If you didn't flash TWRP before and you don't wanna lose warranty, then boot in stock recovery and wipe, but your internal memory will be wiped too.
I never used a PIT file when I flashed stock ROM.
EDIT:
Oh. Nice
I'm glad I helped you.
Click to expand...
Click to collapse
I'm sorry I didn't try flashing the firmware you provided me with in the first place, thereby "making you" type more on an answer that has been answered (by my flashing the correct firmware). There is something else you might help me with, if you have the time. Why did you provide me with a link to the German firmware? I told you it had Austrian CSC. And yet the German firmware was the one that actually worked. How so? And something else. Which is the website that you sent that firmware from? You edited your post soon after you had posted the link.

Dionisis89 said:
I'm sorry I didn't try flashing the firmware you provided me with in the first place, thereby "making you" type more on an answer that has been answered (by my flashing the correct firmware). There is something else you might help me with, if you have the time. Why did you provide me with a link to the German firmware? I told you it had Austrian CSC. And yet the German firmware was the one that actually worked. How so? And something else. Which is the website that you sent that firmware from? You edited your post soon after you had posted the link.
Click to expand...
Click to collapse
Huh? I only gave you links with the YouTube video and SamFirm.
Oh wait, I think that maybe SamFirm downloaded latest available update. In SamFirm you can switch to manual mode and type there the region, PDA and CSC and you can download the firmware which you want.

#Henkate said:
Huh? I only gave you links with the YouTube video and SamFirm.
Oh wait, I think that maybe SamFirm downloaded latest available update. In SamFirm you can switch to manual mode and type there the region, PDA and CSC and you can download the firmware which you want.
Click to expand...
Click to collapse
I didn't use SamFirm to download the firmware file, of that I'm sure. Mostly because upon attempting, I failed. I had put SM-J500FN in model name and ATO in CSC, but SamFirm found nothing.
I think you had a link from Mediafire in your response to me and that's how I downloaded the firmware. Hell, I might be mistaken, since I searched through a ton of threads, including some at XDA, in order to find a solution. It's possible I saw the link at another user's post.
In any case, thank you very much, once again. You saved my phone from becoming a paperweight.

Dionisis89 said:
I didn't use SamFirm to download the firmware file, of that I'm sure. Mostly because upon attempting, I failed. I had put SM-J500FN in model name and ATO in CSC, but SamFirm found nothing.
I think you had a link from Mediafire in your response to me and that's how I downloaded the firmware. Hell, I might be mistaken, since I searched through a ton of threads, including some at XDA, in order to find a solution. It's possible I saw the link at another user's post.
In any case, thank you very much, once again. You saved my phone from becoming a paperweight.
Click to expand...
Click to collapse
Is this the link you talk about? http://www.mediafire.com/download/skldahurz12dick/DBT-J500FNXXU1AOI1-20151006173751.zip . If yes, it's the German stock ROM I've uploaded andmentioned it in my ROM thread at installation instructions I posted it only there. It's kinda old firmware, but always worked fine for me, didn't have any issues (it's the firmware which my phone came with).
You welcome! I'm glad I helped you!
Maybe the OP (first post) has same problem like you. He'll have to read

#Henkate said:
Is this the link you talk about? http://www.mediafire.com/download/skldahurz12dick/DBT-J500FNXXU1AOI1-20151006173751.zip . If yes, it's the German stock ROM I've uploaded andmentioned it in my ROM thread at installation instructions I posted it only there. It's kinda old firmware, but always worked fine for me, didn't have any issues (it's the firmware which my phone came with).
You welcome! I'm glad I helped you!
Maybe the OP (first post) has same problem like you. He'll have to read
Click to expand...
Click to collapse
Yes, yes, that's the one!
I doubt he still has the problem though, since the thread was created at the end of August. Nonetheless, other people who might face the same issue will be able to read this thread and extract useful information.

Stuck on AT&T Unreleased beta nougat update from earlier this year

Hi, so i'd like to upgrade my AT&T GS7 G930A to the latest available version of android that's released, as i'm still on the nougat beta update from earlier this year that wasn't officially released(meaning i'm still only at security update's from january 2017), however, none of the odin files i've tried have worked (links will be below) it keeps getting stuck at "Initializing" and on my phone it keeps saying "Odin Protocol version error", so i was hoping you guys would be able to help me
https://forum.xda-developers.com/att-galaxy-s7/how-to/pk1-odin-files-t3522168 (was going to OTA update after downgrading)
https://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-g930aucu4bqd4-5-18-2017-t3608909
and https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-android-n-offical-odin-package-t3567801
the version currently installed on my phone is G930AUCU4BQA4

You need to go completely back to stock in order to get back on nougat latest I suggest that you flash back to the pk1 marshmallow 6.0 and use the odin provided by Sam mobile

logoster said:
Hi, so i'd like to upgrade my AT&T GS7 G930A to the latest available version of android that's released, as i'm still on the nougat beta update from earlier this year that wasn't officially released(meaning i'm still only at security update's from january 2017), however, none of the odin files i've tried have worked (links will be below) it keeps getting stuck at "Initializing" and on my phone it keeps saying "Odin Protocol version error", so i was hoping you guys would be able to help me
https://forum.xda-developers.com/att-galaxy-s7/how-to/pk1-odin-files-t3522168 (was going to OTA update after downgrading)
https://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-g930aucu4bqd4-5-18-2017-t3608909
and https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-android-n-offical-odin-package-t3567801
the version currently installed on my phone is G930AUCU4BQA4
Click to expand...
Click to collapse
Just flash this firmware using Odin3_v3.12_PrinceComsy

muniz_ri said:
Just flash this firmware using Odin3_v3.12_PrinceComsy
Click to expand...
Click to collapse
Nope, now i get
Code:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
tlopez1973 said:
You need to go completely back to stock in order to get back on nougat latest I suggest that you flash back to the pk1 marshmallow 6.0 and use the odin provided by Sam mobile
Click to expand...
Click to collapse
how would i go about finding these files? as you can see by one of the links in my post, i already tried the PK1 firmware from here

From what I learned it always ends up being an Odin problem not going back just try different versions of Odin make sure your restart your phone when putting it in download mode

logoster said:
Nope, now i get
Code:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try just flashing the CSC file with that Odin version. It contains the .pit file to format your partitions. If that works you should then be able to flash all 4 files.

muniz_ri said:
Try just flashing the CSC file with that Odin version. It contains the .pit file to format your partitions. If that works you should then be able to flash all 4 files.
Click to expand...
Click to collapse
nope, same error, <ID:0/004> FAIL! Model dismatch fail

logoster said:
nope, same error, <ID:0/004> FAIL! Model dismatch fail
Click to expand...
Click to collapse
Try the reverse for kicks and giggles meaning try all other files except CSC.

muniz_ri said:
Try the reverse for kicks and giggles meaning try all other files except CSC.
Click to expand...
Click to collapse
<ID:0/004> FAIL! Model dismatch fail

tlopez1973 said:
From what I learned it always ends up being an Odin problem not going back just try different versions of Odin make sure your restart your phone when putting it in download mode
Click to expand...
Click to collapse
so do you have any links to both the PK1 files and odin that you know work? because i still have this problem, and everything i've tried just keeps giving me the same errors, either that odin protocol mismatch, or the model dismatch failure (and you also said try sammobile odin? i can't find it, and their website seems to insist that the G930A doesn't exist)

Sorry for bumping, but I'd really like to fix this