Does one of these exist? I have a cheap TPU S-line case from ebay that I bought when the phone was first released. It works with the QI charger but it does not keep the dust out of the ports.
I bought two cheapies off ebay to test if something a little thicker would work with the QI charger and so far nothing does. Seems that any case that covers ports are thick and may not work with the QI charger.
BTW its the Energizer charger, not the official Google one.
Have you considered just getting a microusb port cover? http://www.moddiy.com/products/modDIY-Micro%2dUSB-Protective-Jack-Cover.html for example
ziddey said:
Have you considered just getting a microusb port cover? http://www.moddiy.com/products/modDIY-Micro%2dUSB-Protective-Jack-Cover.html for example
Click to expand...
Click to collapse
I have but if a case exists that will work then I would like to give that a shot first. I notice the covers for the cases are snug fit so it wont allow dust in at all when a plug may leave room between it and the case. I work in a very dirty environment and would like to keep the phone itself as clean as possible.
i can not use my smart flip case cover and qi receiver at the same time.. (see picture )
there is one out of two pins on the back side that is common between both accessories.. is there any solution for this without buying the more expensive s-view charging flip cover???
this is the flip cover i have
http://www.amazon.com/Samsung-Wallet-Flip-Cover-Galaxy/dp/B00ITI23GO/ref=cm_cr_pr_product_top
There are QI receivers compatible with this flip cover. I tried one and it fits better with this flip cover than the standard no flip cover. This is the one I got: http://www.ebay.com/itm/390848355459
receiver
ok so this 3 pin qi receiver will not over lap with one of the pins of flip cover? this looks really cool.
also i think this seller does not ship to US.
edit: nevermind.. i found a seller who ships to us.. I hope this one works with my flip cover without any issues.
thanks for the input
Which case supported the wireless charging back cover??
Tried the SGP one, it wasnt fit
iblason armorbox
Never got into wireless charging on my S7. Always had a magnetic mount on the vent with a metal plate between the phone and the case. Now that I'm hooked on wireless charging, I'm on a similar setup but with a wide ring magnet between phone and case so it doesn't interfere with wireless charging. My one issue is that when the phone is flat on a desk, it rocks just a little (and I like a thin case). So what I'm looking for is a thin case, with an embedded magnet (so it's a flat bottom surface) and where the magnet is in a configuration where it doesn't interfere with wireless charging (whether it's a wide ring, or a few magnet points spaced out, etc.) I've thought about digging into my case as a DIY but not there yet Pitaka MagCase looks like it would so the trick but it hasn't been released yet. Any out there that I'm just not finding?
Thanks!
And, this is on an S9 plus.
Can you post pics of your setup? I'm looking for a magnetic wireless car charger that holds up via the vent.
Sent from my SM-G965U using Tapatalk
thx for the tip.... now i want one too
https://www.ipitaka.com/collections/magcase-for-samsung-galaxy-s9
Search on Amazon for "Magnetic Wireless Car Charger, ELEGIANT Fast Wireless Charging Car Mount Phone Holder". Looks like it's now out of stock but there's dozens just like them. I went with something inexpensive to make sure it worked. And it did- fast charged on the mount as well as the Samsung official desktop wireless charger. Although the swivel ball joint on the vent mount was a little flimsy. I placed the magnetic ring such that the top of it was about 1/4" below the bottom of the fingerprint sensor (I spent a lot of time trying to figure out exactly where the coils in the phone were; you can take a good guess by knowing that the desktop Sammy wireless charger woks with both the phone standing upright as well as on it's side and that it's got two coils).
Even though the ring is very thin, it still adds a slight bulge in the middle and makes it "wobble" a bit. I don't have the right shop equipment to shave a circular channel on the inside of the case to place the magnetic ring
Found one made by Nillkin. Have to use their own charging mount (which makes perfect sense as it uses four small magnets at four corners of the mount). Reviews aren't great, it's standard (not fast) charging, and the I like my side buttons uncovered.
Xvida makes one as well (a little bulkier than the Pitaka) but S8 is the most recent they support as of now.
hey guys,
you might wanna hold off getting the pitaka magmount, I received info from pitaka that the s9+ position of the wireless charging coil of S9 therefore the position of the built-in metal plate is different from other cases, they are still testing there new wireless charging mount, it will come out later.
I will be getting a review unit of the case later and I will let you know how I feel about the case. cheers guys.
xzr3b0rnzx said:
hey guys,
you might wanna hold off getting the pitaka magmount, I received info from pitaka that the s9+ position of the wireless charging coil of S9 therefore the position of the built-in metal plate is different from other cases, they are still testing there new wireless charging mount, it will come out later.
I will be getting a review unit of the case later and I will let you know how I feel about the case. cheers guys.
Click to expand...
Click to collapse
I have the iOttie magnetic mount/quick charger in my car.
It worked really well with my S8 and note 8.
I put the small metal ring inside the case on my S9+ and it was very finicky.
Sometimes it would only charge (not fast charge) and other times it wouldn't charge at all.
I found that by placing the ring up higher near the camera, it maintained position to quick charge the phone and hold it securely.
The qi coil in the S9+ seems to be a bit closer to the camera than the other devices I've used.
I hope this helps.
Sent from my SM-G965U using Tapatalk
Great- thanks- similar to my current setup- I'm just looking for a case where the ring is actually embedded in the case, so the back of the case is perfectly flat.
Looks like from another thread the S9+ MagCase has launched- not on Amazon yet but on the Pitaka site- would love to see a review to make sure it quick charges wirelessly (as opposed to not quick). Sounds like they had issues with magnet placement originally and that might affect it.
Nillkin makes one. It's on Amazon as well.
y2k1ltd said:
Nillkin makes one. It's on Amazon as well.
Click to expand...
Click to collapse
Yes- thank you- the Nillkin looks great- and a lot less expensive than the Pitaka- but the case has full edges that cover the buttons which I'm not a fan of.
texasmax said:
Yes- thank you- the Nillkin looks great- and a lot less expensive than the Pitaka- but the case has full edges that cover the buttons which I'm not a fan of.
Click to expand...
Click to collapse
Gotcha, it's not bad.
hi ,
can some one recommend the must have accessories for the note 10 plus 5g.
which you must have if you are getting the phone.
many thanks
ps I have ordered the genuine led flip case for the phone
I got a wireless fast charger, bt earbuds, c to 3.5 mm original samsung dongle, a 6 ft pd certified cable, light cases, sturdy cases, tempered glass screen protector, plastic back protector, aluminum camera protective ring, 6000 mAh battery case, to mention just the most significatives, I dont know, get what makes you feel fine!
Thanks
Got the USB cable,wireless charger .
Was going for the official samsung l
Thanks
Got the USB cable,wireless charger .
Was going for the official samsung led flip case .would you recommend any other case which also wakes and puts the phone to sleep when you open and close the case