Related
my first for ages.
I recently purchased a wizard which looks to be virtually brand new.
now the other day I updated it the the o2 uk latest rom as it was running a really old rom.
and it has been running perfectly, i have not looked into running any other rom or performance upgrades etc.
now I was using the device in landscape and after closing the unit my screen went bright white and my pride and joy is now not usable.
I can still acept calls, the touch screen still works but the screen is pure white.
Ive contact a few places and they all say the screen has died and needs replacing
Does this sound right.
its a £80 fix if this is right. im so gutted.
any advice is great before i pack it up and send it off.
anyone please....
Can you put it into bootloader mode? If not i would say you have a loose connection on the screen to the mainboard i had the same problem with my old phone the screen disconnected for the main board so no display! If you cant get it replaced take it apart and carefully check the connections if still doesnt work i would try another screen or buy one.
even when i reset it, it stays whits so cant see anyhting on screen,
ive had someone take it apart and re-seat the cables and still just a white screen
so im off to purchase another one in hope this is all thats gone
as your phone is booting up press and hold the camera button, is the screen still white?
cant tell now. ive sent if off for repair.
Im gutted.
bleep said:
cant tell now. ive sent if off for repair.
Im gutted.
Click to expand...
Click to collapse
I had a similar issue, the keyboard sliding in and out must have worn out the switch that detects when it is open/closed. I had had my wizard a year and the screen started flickering, i dealt with it for a while, then the scree was stuck blank white unless if i pressed on the area of the phone that had the contact.
I had to send it back and got a refurb.
sounds like thats what happened to you too. Hopefully when you get it back it will be good as new
ive sent mine for a screen replacement tho not a repair.
now im worrying that its gonna come back in the same state.
Gulp
got my wizard back after having the screen replaced.
2 days later when ever i touch the bottom of the screen with pen, finger or even breath on it.
the screen goes off and the phone locks up and dies.
I have to take battery out and restart it and it then works great till i touch the bottom again.
Sound like a dodgy screen or something else.
Seems like a flexi strip(The one conecying the display to the mother board) sometimes if the strip develops a tear or is not properly connected this issue usually happens.
the shop doing the repair have said there is the following issues
1- padding issue on the screen (either too much or not enough)
2- Problems with the main board. (something on there is failling, hardware wise)
How the hell could this be happening on a device that was working perfectly
apart from the screen had died.
have they done more damage attempting the repair... I think so .!
I had the white screen 6 months ago. Luckily still under warranty period so got it repaired. It was the flexo-cable. since the fix no problem so far despites using the phone (also in landscape mode) daily.
when i got it back after the screen was replaced my xda worked great but as stated as soon as some preasure was applied to the bottom of the screen it would just die there and then.
I would have to take the battery out and then it would power on as normal
but again if i put presure on the bottom of the screen.. bang DEAD !
so sent it back to them and they told me what I stated above !
now waiting 2wks to hear what they are gonna do about it
not a happy bunny
still nothing back from the company thats doing the repair.
i dont know why they do this.
Im now thinking of getting my Xda back, selling it either on here or ebay and purchasing a new one.
Should i quit now or wait out for the miracle that they fix it completly.
Anyone in the uk reconmend a good repair company please im pulling my hair out.
http://forum.xda-developers.com/showthread.php?t=303872
theres your answer
Anyone else had this problem yet? Had mine since Oct. 4th
I didn't try to do a data wipe. Just took it to T-mobile for a replacement. Didn't want it to start working again because I had got a scratch on my phone anyways and it was a good opportunity to get a replacement.
Me too. When I use my headphone, people on the other line can't hear me. This happen more than once. I try to do a hard reset but it still don't work.... anyone have any solution.
tino888 said:
Me too. When I use my headphone, people on the other line can't hear me. This happen more than once. I try to do a hard reset but it still don't work.... anyone have any solution.
Click to expand...
Click to collapse
My issue was the microphone on the phone. Did you not buy from T-mobile or other authorized outlet? Your phone should be within warranty.
Another thing to try would be a Data wipe/factory reset.
Another thing I noticed is that when I charge my phone there is an LED in the earpiece. My last G2's LED must have been defective.
Hi, what happen if you buy the phone from craiglist, how can I return ?
tino888 said:
Hi, what happen if you buy the phone from craiglist, how can I return ?
Click to expand...
Click to collapse
Contact HTC about warranty service I guess. I don't understand why someone would sell the phone on craigslist when it is within the 14 day return policy for tmobile where you can get a full refund unless maybe it was stolen.
You can contact HTC here: http://www.htc.com/europe/CA_Hotline.aspx?region=NorthAmerica
I'm just speculating here, but it's based on past experience with flexible connectors like the one used to bridge the display portion to the body. I'm surprised to see the possible defect occurring so early in life of this handset, but the fact that the ribbon is forced to bend back 180 with a radius of less than 1mm when the display is open puts a LOT of stress on the thin conductors of the ribbon. The problem might have been precluded by HTC using carbon traces rather than typical metallic copper on this critical component. See for yourself by looking at your phone edgewise next time you flip it open. If we're lucky and enough handsets fail like this HTC MIGHT do something of a product recall. Incidentally, has anyone with a dead mic also experienced random screen garbage or erratic touch response? Again I point to the same design flaw.
Here's to hoping I'm dead wrong guys!
This problem just happened to me. With no apparent reason, the internal speaker stopped working. People can hear me, but I can´t hear anything.
Funny thing tho, if I activate the external speaker, it works. The problem is the internal speaker only.
Is it a known problem like the shoddy usb connector on some kaisers ?
tino888 said:
Hi, what happen if you buy the phone from craiglist, how can I return ?
Click to expand...
Click to collapse
dont say anything to tmobile about where you bought it from. there is a one year warranty the original date of purchase. at least there was with the motorola cliq that i got off craigslist. returned it for a fab'd one without scratches gonna do it one more time right before the year is up haha
My G2's mic has also stopped working, been looking around different websites for parts, but I can't seem to find it, u guys know anyone?
If I use it with the headphones/mic, it works fine, people hear me and all. If not, people can't hear me.
FWIW, I had this exact problem shortly before Christmas. the mic started by cutting out sometimes, then failing altogether. Using an external mic worked fine so it wasn't software, just the physical connection to the built in mic. I'm pretty sure that sivalley is right in his speculation that the issue is the flexible ribbon connector.
Fortunately for me my phone was under warranty and HTC arranged to pick it up etc.
Weirdly the day before they were due to pick it up, the whole screen stopped working. I could power up and feel the vibration etc, but the screen never came on. Again I think the common factor was the flexible ribbon.
When HTC repaired it it came with a long list of things they'd replaced to get it working again, so it may not be as simple as just replacing a ribbon connector.
I have no idea whether it's possible to source the parts, but it might be worth finding out how much HTC would charge to fix it if it's not under warranty (could still be a good deal)
The top part of my phone does not respond to touch anymore... it is impossible to bring down the notification bar... and once in a while the whole screen goes unresponsive.. tried factory reset but still the same problem..
am having the same problem since 2 days back
after reading some of the posts i found that the Digitizer For HTC G6 Legend A6363 should be replaced with new one i ordered mine from ebay
ebay.com/sch/i.html?_from=R40&_trksid=p5039.m570.l1313&_nkw=Digitizer+For+HTC+G6+Legend+A6363&_sacat=See-All-Categories
waiting for the item to be delivered
I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/
nnssxx said:
I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/
Click to expand...
Click to collapse
Do you have widgetlocker, by any chance ?
Or a lockscreen replacement which disable the notification bar during the "slide to unlock" state ?
I didn't know there was such thing as widgetlocker. I use CM7 latest nightly, never seen that thing.
I also facing this problem from last 2 weeks and i also think this is digitizer problem. If anyone else found the solution else changing the digitizer, then please post.
This is beautiful phone but htc added a poor quality things in it, due to which many users facing such problems.
Nah.. I dont think its because of widget locker.. its the digitizer..
well that's a shame, gotta buy a new digitizer on ebay after just over 1 year of use...
I know.. this sucks... Im planning to upgrade though.. Any of u guys have any suggestion?
Depends on your carrier if you want suggestions for an upgrade.
...but that would drive the post off-topic.
Sent from my HTC Legend using XDA App
I have the same problem. my screen doesnt work anymore because some water got in from the grill above the screen :S
should I try to take apart and dry off or shall I buy a new digitizer directly?
I think it may be a good idea to try disconnecting your digitizer and reconnect it as it just might be helping. I did it on my girlfriends legend and it has been working perfectly ever since. Maybe a good idea to at least try that before buying a new one. So i guess it could be in the connector to? At least this worked for me.
My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??
Earayil said:
My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??
Click to expand...
Click to collapse
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.
My problem got worse and the phone became totally unresponsive, changed it, got a new phone.
Tanayar said:
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.
Click to expand...
Click to collapse
exact same problem here, mine works when it feels like working, totally random, I simply can't understand why, I doubt it's the temperature... I think its in the device theres something wrong, I smack it numerous time and it works right after a big smack on the screen, or rub your whole hands on the screen, also, the angle you are holding the phone affects this problem, if none of these work, a phone restart always makes it work at the beginning. Oh boy did my phone took and taking much beating... oh well, I wish I could permanatly fixed the problem here, as I was thinking of handing the phone to my brother when I upgrade, I'm using CM 6.1.
I still recommend the same thing that i posted earlier here, her screen still works perfect.
I had the same problem few months ago. The problem is with the touch digitizer. I bought a digitizer on ebay and replaced it myself. After that my phone has been working fine. Its not that hard to replace it if you have a small knowledge about hardware.
I use to get that unresponsive screen issue only in the summertime, plus it gets worse if I add humidity (read: sweat). I just need to give it some time then to dry off/ cool down outside my pocket, and it's all fine again.
Broke my screen and fixed it at a lab a few days ago.
today I noticed weird dark spots where I press or when I bent the phone a little, I don't think I had this in my original screen.
A video of the problem is attached in a zip file.
Any one know what is the cause of this problem? will it get worse in time? is this indication the screen is not original LG maybe?
Thanks.
any one seen this problem before?
I've never seen that problem before. I do not think that it'll get worse over time but it's a definite indication that you've messed with your device. Just use it till it cracks, then get an original replacement
vPro97 said:
I've never seen that problem before. I do not think that it'll get worse over time but it's a definite indication that you've messed with your device. Just use it till it cracks, then get an original replacement
Click to expand...
Click to collapse
It is an original replacement, the screen was replaced in a lab, not in my house.
I took the phone back to the lab today and they told me it is common to see this in LG and Samsung phones after replacing screen.
I guess if it was common people here would know it....
I have myself an LG G6 (Canadian variant), it currently has a really bad issue where the screen likes to randomly either completely flip out or not work at all.
In the following image, during the setup process the screen decided to do that. I just don't get it.
https://i.imgur.com/5x64OIr.jpg
In this next image the screen woke up after me literally spamming the home button, you know those old tvs where they had to warm up to full brightness, that's basically what the phone did and then it produced those lines.
https://i.imgur.com/2lFgqHY.jpg
In this next image the device screen was just frozen. I had clicked the button to start the setup but nothing happened and i heard the sound the phone makes for touching the screen so the phone was in fact doing something.
https://i.imgur.com/ToglENK.jpg
I'm just curious if any other G6 owner has experienced this issue before and if so, were you able to fix it by yourself.
Common with liquid damage.
basicreece said:
Common with liquid damage.
Click to expand...
Click to collapse
the device is brand new
TechGuyAnthony said:
the device is brand new
Click to expand...
Click to collapse
Send it back then lol
Thats manifacturing mistake. Send it back to the store and demand on new device.