Hey all. I was wondering how to format/create my sdcard with 2 partitions one fat32 the other ext2 on a mac. I used the search engine but cannot find anything.
I'm not a terminal noob but I can't figure out how to format/create the 2 partitions. I need help because I want to move my data from the g1 to the sdcard.
Thanks!
Install this http://sourceforge.net/projects/ext2fsx/ and then reboot and use the Disk Utility in /Applications/Utilities/
this will not format a ext2 partition, it only allows you to mount it, your best bet is to d/l GPARTED or of you have windows in parallels use Paragon Partition Manager... this will not work if your windows is in a bootcamp partition, the other option is to use a pc (sadly hu?)
If it helps, I actually used an ubuntu live cd and installed gparted while booted to the cd... of course, i had already made the sdcard fat32 in windows but gparted allowed me to resize and format the remainder in ext2.
I've used the ext2fsx tool to partition my SD card on my mac. I don't think I had any extra software installed, and I just used the Disk Utility...
I'm also having trouble creating a valid partition. I'm using gparted on an ubuntu live cd but the sdcard doesnt like being messed with.
What disklabel are you using? [Loop / msdos / bsd etc]?
I think i've tried every combination and haven't gotten anywhere.
Also, i've read that the card class makes a difference, is this right or does it only effect the speed of data transfer?
Any help would be much appreciated!!
.//Yamthief
So this was solved by using a tool from sdcard.org to format my sdcard in a PC. Once formatted with that tool cwm started seeing correctly.
-------
I'm running 3.1 rooted
I've flashed Thor's 1.4.2 recovery.
I have two sd cards: a 2g and an 8g.
Both work when accessed on a PC and on the iconia.
Neither work in cwm so I can't flash any roms.
I have tried formatting the sdcards on two different PCs. for the 2g I tried both fat and fat32. The 8g is fat32. In every case cwm says it can't mount it.
Additionally, I can't seem to use a USB key, although that may be that i don't know how to use it.
Thanks for any help.
-Bert
When in CWM and you go to install zip from sdcard do you see any folders where you choose the zip. Just wondering if it isn't mounted already. Physical sdcard is in /mnt/external_sd
and not /mnt/sdcard.
PsychosisNC said:
When in CWM and you go to install zip from sdcard do you see any folders where you choose the zip. Just wondering if it isn't mounted already. Physical sdcard is in /mnt/external_sd
and not /mnt/sdcard.
Click to expand...
Click to collapse
Thanks for your reply. I'm prety sure It's not mounted already.
I'm attaching a screenshot to show the exact message I get when trying to browse for a zip. I get a similar message when I go to mounts and storage and try to mount the sdcard.
im bumping this because I'm really becoming concerned that the device is defective in some way.
I'm hoping that someone can give me some guidence on what I may be doing wrong.
So, brosell, did you figure out a solution? I have the exact same problem - cannot mount sdcard in recovery and I get the exact same message.
When the system is booted normally, the internal storage mounts ok as /sdcard
EDIT:
It seems CWM treats the external sdcard as /sdcard, not the internal storage. So, to flash an update, you need to place it on an external SD card
I always get that error, and I never had to mount anything using cwm, just booted it selected the zip to flash and flash. I still don't mount anything...?
And the zip goes on the external sd not the inturn
Can't format SC Card in Window. If won't mount.
Guys,
Unfortunately SD cards for Android must be formatted by Android. If the card is not properly formatted CWM can not mount it, nor can CWM format it. The best way to get it properly formatted is to put it into an Android Phone and use its format functions. There really is no way on the Icona Tab to reformat an improperly formatted card or a new formatted card. If you don't have an Android phone borrow a friends. You will know that it is properly formatted when you see a lost files folder created on the card by the Android phone formatting process. This is a common problem that many people encounter when performing their first ROM flash. If it was formatted under windows as FAT 32 you can access it and store on it in normal operation mode. But ClockWorkMod can not mount it in recovery mode. Hope this helps. Good luck.
Can mount SD card in Recovery
I should have also mentioned last night in my post here, that my experience has been that it is much easier to flash a new custom ROM from a USB thumb drive. Flashing a custom ROM from USB seems to be less problematic than from an SDCard that appears otherwise to be good and formatted with FAT32, but CWM can't mount it. You can fast format the thumb drive on Windows to clean it off. Then copy your custom .zip ROM to be flashed on to the thumb drive from within Windows then insert it into the USB port of your Icona Tab, boot into CWM recovery (I'm assuming you know how to do that so I won't go into it here.) I forget exactly where in the CWM menu it is, it might be under the CWM advanced sub-menu but it say's something to the effect of Install zip from USB. It always works for me with no problem. The advantage is that you do all your prep work on Windows and then flash from the thumb drive which I believe has an ISO standard across all platforms and usually comes already per-formatted. This is an alternative method if you can't get your SDCard properly formatted (see my previous post in this thread for how to get it properly formatted so that it will mount under CWM.) Again, good luck!
I want to cry!!
I tried re formatting! Nothing! Cmw is not on sd card! Nothing is working! Still stuck on acer start screen! Yes i am a noob! But i read alot into this stuff b4 i do it! I wish there was someone i can have come to my house and do this for me! I have tried everything!!!!!!!!!!! So frustrated!!! Someone pls help me!!!!
in CWM recovery, there are 2 options,sd and "internal sd" i think(for me atleast). i chose the internal sd and it mounts.
brosell said:
So this was solved by using a tool from sdcard.org to format my sdcard in a PC. Once formatted with that tool cwm started seeing correctly.
-------
-Bert
Click to expand...
Click to collapse
Thank You Sir! been looking for this fix for a long time
brosell said:
So this was solved by using a tool from sdcard.org to format my sdcard in a PC. Once formatted with that tool cwm started seeing correctly.
-------
/QUOTE]
thanks brosell, for the solution,
I have a 512MB SD card in the g5360, was FAT formatted. reformatting the sdcard with the tool from sdcard.org worked for me as well, afterwards it could be mounted by the stock recovery
and could install update.zip (prior to install CMW)
kr, Erik
Click to expand...
Click to collapse
Ext4 / NTFS MicroSd & Usb Mounting -v2.3 (fat32 UMS) MTP/UMS Switching/ CM9/10 info
Hi,
i have developed an App, EzyMount - that pretty much takes care of mounting & utilising ext4 / ntfs storage properly. So no need to be limited to 4gb file size restrictions anymore !!
Updated info for CM9 / CM10 builds
****************************************************************
It seems that CM9 /CM10 changes the default mount point for external sdcards
For ntfs partition only sdcard
Change the default mount point to: /storage/sdcard1
Then try mounting here it should work ok and be picked up automatically by other Apps as well.
If you have two partitions:
1st Partition would be vfat then this should get auto mounted to /storage/sdcard1
2nd Partition (ntfs) : change the mount point to: /storage/sdcard0/extStorages1
Then try mounting here it should be ok
*****************************************************************
Version 2.3 Update
Universal Mass Storage Mode support for 7.7 tabs also most other devices.
Auto MTP/UMS Switching
When you select either MTP Mode or UMS Mode, the App will automatically switch your device into these respective USB transfer method.
It is also possible to use UMS mode for any external MicroSd card, fat32, Ext4 or NTFS formatted.
For ext4 / ntfs this is taken care of by the App
For fat32 external sd cards (these are mounted automatically by Android)
Create a new Mount Point which is the folder location of your external MicroSd card.
For example, on Galaxy 7.7 devices - this will be /mnt/sdcard/extStorages/SdCard.
For Galaxy S3 devices - this will be /mnt/extSdCard
For other devices this is typically, /mnt/sdcard/external_sd
In the partition setting put: /dev/block/mmcblk1p1
Once you have created this mount point, just select "UMS Mode".
After you have finished copying files to or from your PC, it is important to "safely eject your usb device from your PC".
Important too - Finally, disable "UMS Mode" by it pressing again.
You can switch back to MTP by selcting "MTP Mode".
(If MTP does not become active straight away (Android being slow too pick up the change)- you may need to Go to : Settings > Storage > USB PC connection & toggle between Media Device (MTP) & Camera PTP. So Android re-starts MTP. However, it should work without this step)
*****************************************************************
Version 2.1 update
1) New Sliding UI.
2) Ability to mount up to 10 devices / partitions.
Just create a new Mount Point for each device / partition you need to mount.
To create a new Mount Point:
Just slide the UI to the "mount another drive or partition". Then just use select a mount option as per usual to create a new mount point and mount at the same time. Or you can press the "microsd info" "usb drive info" to create a new Mount Point.
3) Works with ICS update
Just ignore "ICS warning messages" - when it comes to ntfs usb devices.
*****************************************************************
Version 1.7 update
1) Quite a few new features added:
NTFS / Ext4 MTP Modes - this allows you to easily switch between "normal mode" and MTP mode.
MTP mode is used for transferring files to PC.
Usage Example:
Personally, I have a 32 gb sd card
the First partion on it is an exFat 4 gb partition. This is picked up the tab and mounted as normal to the location of /mnt/sdcard/extStorages/SdCard
I can use this for my cwm backups etc, other files etc - system running as normal.
This 4gb partition will show up in windows via MTP.
The problem:
I also have a 28GB Ext4 second partition on the Card , this could be an NTFS partition too.
I want this too show up in windows so I can transfer (br rips etc) but it wont as the my first fat32 partiion is shown up instead.
By using NTFS MTP Mode or Ext4 MTP Mode - the App will automatically "switch" the partitions so the larger NTFS or EXT4 mode shows up in windows.
Once done then you can disable NTFS / EXT4 MTP MODE and the device will go back to normal as it were.
(the MTP folder location is set to work already for 7.7 devices and similiar. For other devices this needs to be adjusted. It is normally the default folder loaction of where the external SD card is mounted by the phone.)
UMS Mode - universal mass storage mode.
Although the 7.7 does not have ums mode (MTP is being standardised on ics devices and above) but there a lot of devices than can only use ums mode for transferring file to PC.
I have added a ums mode. Which basically makes your micro sd partitions available on pc. (suitable for non MTP devices)
You do not need to "turn on usb mass storage mode" just select "ums mode" from the APP and it will do it for you.
Also - in windows ext4 partitions are not recognised but ntfs one are off course. In linux both should be available. (one of the benefits of MTP)
Comaptibility Mode
Is for those users whose mounting of micro sd cards might fail for some reason. This mode tries a bit more thorough to mount your micro sd drives.
Better Error Messages
I have added a lot of better error messages that the de facto "error mounting " message
It should provide the reason why things might not be mounting.
I hope this helps some with issues and pm if you have any other issues or things you think might be useful to add.
( I will get round to updating the website with the added features soon)
*****************************************************************
version update 1.6
1) Fixed slight issue with Auto Ext4 permission handling.
2) Also changed the default mount folders of NTFS or Ext4 microsd card to the /sdcard/extStorages/SdCard
This should mean now MTP will see the card in windows properly and you can access them as you would normally. (I think this has caused some confusion - i had left this generic for other users on different devices)
(This means for other devices you should specify the folder in the "location" settings which is normally seen by windows MTP - i.e when you use a fat32 microsd)
I hope this has resolved some issues people might have been having.
version update 1.5
1) Modified labelling on some settings to make it clearer.
2) Mounting usb devices has been slightly tweaked to care of multiple partitions.
version update 1.4
Following on from your recommendations.
1) Mounting MicroSd Ext4 or Ntfs now automatically takes care of you partitions so you do not need to specify them.
This should make it much simpler to mount your microsd cards.
2) Usb Mounting widget should be compatible for all home screen launchers. (touchwiz, adwlauncher etc.)
************************************************************************************************************************************************************************************************************
please remember to unmount usb / microsd devices before ejecting - For usb devices you use the 1-click usb mount/umnount home screen widget for this or from within the App
************************************************************************************************************************************************************************************************************
There have been a few issues regarding using external Usb formatted Ntfs or Ntfs microsd drives. Also I wanted to use an internal micro sd Ext4 partition for large movies (1080p hi-def/bluray etc) or just keep them on an external Ext4 usb disk. Having looked at other solutions, there didn't seem like one that just "worked" or the way I wanted it to do so.
Using Ext4 over Ntfs is native to linux/android and it consumes less cpu than using ntfs. But you cant simply mount an ext4 device and start using it like a regular file system as the file permission are not properly created by Android. I also still needed to have Ntfs read/write support on occassions.
You can use any cheap otg usb cable found on ebay etc. (The same cables as used for 10" galaxy tab devices for example).
As I used the 7.7 as one of my development device so it is pretty suited for our tabs & similiar tablets i.e 7.0+ etc, but is more than generic enough to work on other devices.
The App provides all the necessary features and customization options so you don't need to worry about file formats, file size limitations or file permissions again !!
There are more tips on how to best use the app on my website. If you have any comments good or bad please let me know so I can improve the App.
Cheers.
Need help in mounting microSD as Mass Storage
I don't understand Settings Guide on your website. I downloaded your app but it isn't working for me and I get Partition error every time I try to mount. What should be my partition and what should be the location? I simply want to mount my NTFS microSD card as mass storage which is usually at /extstorages/SDcard/. I did root my device last night and I also installed busybox v1.19 few minutes ago. What am I doing wrong?
Same here, says "Check your partitions". Why do *I* have to worry about partitions? Can't it just work?
Using rooted Tab 7.7.
Asad_Khan said:
I don't understand Settings Guide on your website. I downloaded your app but it isn't working for me and I get Partition error every time I try to mount. What should be my partition and what should be the location? I simply want to mount my NTFS microSD card as mass storage which is usually at /extstorages/SDcard/. I did root my device last night and I also installed busybox v1.19 few minutes ago. What am I doing wrong?
Click to expand...
Click to collapse
belyj said:
Same here, says "Check your partitions". Why do *I* have to worry about partitions? Can't it just work?
Using rooted Tab 7.7.
Click to expand...
Click to collapse
Hi guys,
The default partition of your microsd card is typically:
/dev/block/mmcblk1p1
1) If you have only one partition - so you will put the following in the partition setting:
So for example an NTFS only formated microsd card :
/dev/block/mmcblk1p1
And the same would go for an Ext4 formatted only card:
/dev/block/mmcblk1p1
2) If you have two partitions then typically you will have:
/dev/block/mmcblk1p1
/dev/block/mmcblk1p2
And so on ..
(you can always check for these from a terminal/adb shell)
As these partitions are same for your microsd, you can set them once and forget them about afterwards. I don't try automatically choose these partitions for you and this depends on your partitioning scheme more than anything.
For Usb devices the App will automatically try mounting your usb partitions as these are likely to change more often then not.
Typically, I would recommend the following:
If you have a large 32gb / 64 gb microsd card
Create The first partition as fat32 - maybe 4gb.
This partition will be /dev/block/mmcblk1p1
The tab will automatically mount this first partition & you can use things like cwm recovery for backup as normal.
(Also you wont see an unsupported file system icon in your status bar.)
Then create a second large partition (ext4 or ntfs) :
This partition will be /dev/block/mmcblk1p2
So set this as your Ntfs partition or ext4 partition.
Once you can mount you microsd ok - then you can set it to automount boot.
So need to mess with the settings after that.
Hope this helps and please let me know.
Cheers.
Still MTP connection
Thank you for your explanation. I've can now mount/unmount SD card but when I connect it computer it starts MTP connection and still shows under my computer as a portable device rather than a Mass Storage. Also if I connect it to my computer first it would still ask me to restart the MTP connect when I click mount SDcard and again it shows as a portable device. Changing debugging settings won't help either.
Partition /dev/block/mmcblk1p1
Location /mnt/sdcard/extStorages/SdCard
Asad_Khan said:
Thank you for your explanation. I've can now mount/unmount SD card but when I connect it computer it starts MTP connection and still shows under my computer as a portable device rather than a Mass Storage. Also if I connect it to my computer first it would still ask me to restart the MTP connect when I click mount SDcard and again it shows as a portable device. Changing debugging settings won't help either.
Partition /dev/block/mmcblk1p1
Location /mnt/sdcard/extStorages/SdCard
Click to expand...
Click to collapse
I just tried this. If you click on the "portable device" in windows it shows up as tablet. You can copy files to where you mounted the sd card.
It should work fine.
For me I leave set pretty much as default. As I have the first partition on my sdcard as an exfat / fat32. Then I have an ext4 or Ntfs Partition. This way you tab will behave exactly as normal. But The App should be fine regardless of whatever partitions you have.
Please try this and let me know.
(Also I will look to be adding an auto mounting microsd feature in the next few updates if there is some demand for this. Plus any other features people might suggest in the meanwhile )
Cheers.
To those who have installed EzyMount,
I have updated the microsd mounting feature so it should automatically mount the correct partition for you.
You dont have to manually change the partition settings anymore.
Having said that if there is a particular partition on your microsd you want to mount, then put that in the settings. The app will first try to mount that partition, then try to mount the other partitions if the first mount was not successful.
Also i would suggest setting the mount point folder (location option in settings) to /sdcard/SOME_FOLDER
& not /ext/extStorages/SdCard. which is where the tab mount would mount the microsd card.
Let me know how it goes with the update.
Hope this helps.
cheers.
Hi buddy.
I am totally confused as to how this works.
I went through the info at your website, but I still cannot get this to work.
I have tried only USB flash memory with an OTG USB adapter, both EXT4 and NTFS. I just get an error that says: Error Mounting USB Drive. I can tell that it seems to try, because the activity LED on the drive will flash when I click Mount.
I am using a Samsung Note (i717), so I am not sure if that is the problem. I am only rooted, but the kernel and software is stock 2.3. The phone has both internal memory (called USB Storage by the system) and an sd card; could the app be confused by the various memory locations?
I don't have a spare microsd to format as NTFS, otherwise I would try that.
Any ideas on what I should try? I am a little confused by the settings... they seem to be in many locations, so I am not sure what things to change.
Thanks!
G8351427 said:
Hi buddy.
I am totally confused as to how this works.
I went through the info at your website, but I still cannot get this to work.
I have tried only USB flash memory with an OTG USB adapter, both EXT4 and NTFS. I just get an error that says: Error Mounting USB Drive. I can tell that it seems to try, because the activity LED on the drive will flash when I click Mount.
I am using a Samsung Note (i717), so I am not sure if that is the problem. I am only rooted, but the kernel and software is stock 2.3. The phone has both internal memory (called USB Storage by the system) and an sd card; could the app be confused by the various memory locations?
I don't have a spare microsd to format as NTFS, otherwise I would try that.
Any ideas on what I should try? I am a little confused by the settings... they seem to be in many locations, so I am not sure what things to change.
Thanks!
Click to expand...
Click to collapse
Hi,
I have slightly updated the labelling in the App so should a bit less confusing
You shouldn't really need to change anything.
Partition - refers to the actual "physical" location of your drive as sen by the Androis OS / kernel but this is taken care of automatically so you dont need to specify this. Although you can still specify a partition and that will be mounted.
(You can see the list of your partitions by doing ls /dev/block/* for a command prompt for example)
Location - is where your microsd or usb device will be mounted. Basically the folder loaction on your device where you can see its files / folder contents etc.
The other option refer to the various features - such as auto mounting at boot, auto fixing ext4 permissions, auto usb mounting. If you dont need them you can disable them.
So hopefully we can narrow down the issue.
Do you have busybox,superuser installed ok?
I am not sure what the actual "Usb Storage" on the note is. Maybe there is a variation in the labelling but it should be resolvable.
If you can get me the output from your device from an adb shell or connectbot for example of the following commands:
# mount
and
# df -h
These should help me figure out what might be going on.
(i'll see If i can get my hands on a galaxy note - or have a look at some of the dev stuff in the meanwhile)
Cheers.
Hi. I also heve this problem with Galaxy Note (unable to mount USB drive with one NTFS partition).
Please describe how can i help you to figure out the issue step by step.
Thenks.
-=galex=- said:
Hi. I also heve this problem with Galaxy Note (unable to mount USB drive with one NTFS partition).
Please describe how can i help you to figure out the issue step by step.
Thenks.
Click to expand...
Click to collapse
No problems - been busy with some other work.
So far the App has been installed on the note more tham any other device so seems to be working for some.
A lot of problems are being caused by some users not unmounting the usb device after mounting it for the first time. Which confuses things. I will be releasing an update that takes care of this and possibly a self diagnostics checker that should help in identifying some potential problems.
Also android / linux can be somewhat particular about ntfs so best run a drive check in windows first. Or even better can you try another newly formatted ntfs usb device and see if that works.
I will pm you once i get the chance.
Thanks.
-=galex=- said:
Hi. I also heve this problem with Galaxy Note (unable to mount USB drive with one NTFS partition).
Please describe how can i help you to figure out the issue step by step.
Thenks.
Click to expand...
Click to collapse
I have sent you a pm. Also i have been looking at some of the note dev threads so should have a solution for you I think.
Cheers.
Hi All,
Updated the App to version 1.7.
Check the first post.
Cheers.
This is working great for my 64GB microsd as NTFS. The main problem i have (rather an annoyance) is there is now a constant notification about a "Blank SD card" in the notifications shade.
Does anyone know how to supress this, as it is very annoying to keep seeing it.
rEVOLVE said:
This is working great for my 64GB microsd as NTFS. The main problem i have (rather an annoyance) is there is now a constant notification about a "Blank SD card" in the notifications shade.
Does anyone know how to supress this, as it is very annoying to keep seeing it.
Click to expand...
Click to collapse
You could use the solution ezynow mentions in the first post. Create a small fat32 partition at the start of the SD card, this will also be accessible by things like recovery. Then use the rest of the card as NTFS.
I should apologize for not seeing that tip in the OP. I'll have to wait till i've got some time to repartition the card - any suggestions of what size to make the small one?
Only other problem I see is that the "mount at boot" option doesn't seem to work and I still have to go to the app to enable this.
Trouble with Ext4 MTP
I'm using a 32GB external sd card with a very small 8MB fat32 partition followed by an ext4 partition using the remainder of sdcard. Using Ezymount 1.9, I have been able to mount/bootmount my ext4 partition nicely. Where I'm still struggling is to get the ext4 partition to be accessible when the phone is USB attached to my Linux pc. When the USB cable is attached, I see the phone's internal sd and fat32 partition. When the EXT4 MTP option is enabled, still the fat32 partition is mounted on my pc. I've experimented with UMS and Compatibility modes, but the behavior remains the same.
On my SGS2, the default mount location for the fat32 partition is /mnt/sdcard/external_sd. I created /mnt/sdcard/external_sd_ext4. My external sdcard appears as /dev/block/cyasblkdevblk0, with the fat32 partition as p1 and ext4 as p2. I've configured Ezymount for ext4 with /dev/block/cyasblkdevblk0p2 with a location of /mnt/sdcard/external_sd_ext4. I've tried a number of points for the MTP location, but the resulting behavior remains the same.
Can you help me to get the ext4 partition accessible from my pc when attached via USB?
Thanks
GalaxyQuest99 said:
I'm using a 32GB external sd card with a very small 8MB fat32 partition followed by an ext4 partition using the remainder of sdcard. Using Ezymount 1.9, I have been able to mount/bootmount my ext4 partition nicely. Where I'm still struggling is to get the ext4 partition to be accessible when the phone is USB attached to my Linux pc. When the USB cable is attached, I see the phone's internal sd and fat32 partition. When the EXT4 MTP option is enabled, still the fat32 partition is mounted on my pc. I've experimented with UMS and Compatibility modes, but the behavior remains the same.
On my SGS2, the default mount location for the fat32 partition is /mnt/sdcard/external_sd. I created /mnt/sdcard/external_sd_ext4. My external sdcard appears as /dev/block/cyasblkdevblk0, with the fat32 partition as p1 and ext4 as p2. I've configured Ezymount for ext4 with /dev/block/cyasblkdevblk0p2 with a location of /mnt/sdcard/external_sd_ext4. I've tried a number of points for the MTP location, but the resulting behavior remains the same.
Can you help me to get the ext4 partition accessible from my pc when attached via USB?
J
Thanks
Click to expand...
Click to collapse
Hi GalaxyQuest99,
Could you please run the diagnostics report and send it to me. Hopefully, it is a configuration issue.
What phone/tablet are you using & Also what linux os are you running so i can repoduce the issue.
I am also working on some major new features - so version 2.0 is in the works
Thanks.
Diagnostic?
ezynow said:
Hi GalaxyQuest99,
Could you please run the diagnostics report and send it to me. Hopefully, it is a configuration issue.
What phone/tablet are you using & Also what linux os are you running so i can repoduce the issue.
I am also working on some major new features - so version 2.0 is in the works
Thanks.
Click to expand...
Click to collapse
I have a Samsung Galaxy S2. I use Ubuntu 12.04 LTS. I ran the diagnostics, but don't where to find the report.
Thanks
GalaxyQuest99 said:
I have a Samsung Galaxy S2. I use Ubuntu 12.04 LTS. I ran the diagnostics, but don't where to find the report.
Thanks
Click to expand...
Click to collapse
Hi,
There should be a report generated under /sdcard/ezymount_test.txt.
Could you email it to [email protected].
If there isnt a report then email me at this address too so i can you send you an updated version of the app if needed.
Will setup ubuntu and test this also.
Cheers.
Hi,
I'm in need of some info. The newer nightlies support ext4. After what I have understood the transfer isn't automatically done so one needs to take a backup of the things I wanna save from the sd card and then enter recovery mode and manually format the sdcard. Is that right?
I would also like to know how big files ext4 supports and if it's possible to mount an ext4 formatted sdcard in a pc?
Cheers
FlashTec80 said:
Hi,
I'm in need of some info. The newer nightlies support ext4. After what I have understood the transfer isn't automatically done so one needs to take a backup of the things I wanna save from the sd card and then enter recovery mode and manually format the sdcard. Is that right?
I would also like to know how big files ext4 supports and if it's possible to mount an ext4 formatted sdcard in a pc?
Cheers
Click to expand...
Click to collapse
The convertion to ext4 only effects the internal /data partition. The SD is not touched and also shouldn't be touched. Android, for now, cannot handle a SD not formated as FAT32. Windows also cannot read these partitions by default, only with the help of extra tools like Ext2FSD.
To convert your internal /data partition, choose advanced backup in CWM Recovery and select "data", when the backup is finished, exit the recovery via "go back" until you see the bootmenu.
- Select Tools
- Select File System Tools
- Select Format Data and Cache in ext4 !!!The internal /data partition will be erased!!!
- Go back to Stable Recovery
- Restore your "data" backup via advanced restore
- Aaaand done!
Ok thanks, but doesnt CMX support NTFS on sd card?
FlashTec80 said:
Ok thanks, but doesnt CMX support NTFS on sd card?
Click to expand...
Click to collapse
Yes it does. Your point being?
FlashTec80 said:
Ok thanks, but doesnt CMX support NTFS on sd card?
Click to expand...
Click to collapse
Well, maybe i was wrong with the FAT32. i just thought it's due to compatibility issues with USB Mass Storage...
Sent from my MB525 using xda app-developers app
Ok then i got the knowledge i wanted, Thanks