Help Cm11 RC13 - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

Hi boys İ install cm 11 rc13 on my galaxy y but after the install screen is black after CyanogenMod article and phone is not open(my phone is not bricked)

phadac said:
Hi boys İ install cm 11 rc13 on my galaxy y but after the install screen is black after CyanogenMod article and phone is not open(my phone is not bricked)
Click to expand...
Click to collapse
Been covered loads on times on the support thread and the answer is actually written on the 1st post of the rom thread which I shall quote below
NOTE 2: You must ensure that your phone is running the latest baseband available for your region, or else your device will not operate correctly when a SIM card is inserted. If you have a cooperve and tassve, you may need to flash the latest totoro baseband (which will work correctly on your device). Please see @marcussmith2626's stock ROM thread for links to the appropriate files.
Click to expand...
Click to collapse
You are not using the latest baseband hence the black screen
Flash the latest modem file via odin & the rom will boot (you may need to wipe data mount everything and flash rom again)

Related

[Q] cm 11 does not boot with simcard

i install cm 11 ....in my galaxy y and its dosen't boot after removing the simcard the cm 11 boots perfect......
i tried for second time and i was found that the in my galaxy y the cm 11 does not boot with the sim card i want to ask xda devlopers that why i am facing this problem and what is the solution of this.......
rahul54321 said:
i install cm 11 ....in my galaxy y and its dosen't boot after removing the simcard the cm 11 boots perfect......
i tried for second time and i was found that the in my galaxy y the cm 11 does not boot with the sim card i want to ask xda devlopers that why i am facing this problem and what is the solution of this.......
Click to expand...
Click to collapse
You are using an old baseband
Change your baseband by flashing the modem file from a stock rom firmware via odin
I have uploaded just the modem files on my firmware thread at the top of the dev section if you dont want or need to download the entire firmeware
marcussmith2626 said:
You are using an old baseband
Change your baseband by flashing the modem file from a stock rom firmware via odin
I have uploaded just the modem files on my firmware thread at the top of the dev section if you dont want or need to download the entire firmeware
Click to expand...
Click to collapse
sir please give mo link to download..
rahul54321 said:
sir please give mo link to download..
Click to expand...
Click to collapse
All stock rom firmware is in my firmware thread - you can access it either by clicking the link in my signature and selecting the firmware thread for your phone or go to the top of the dev section - please search and you will find
thanks sir
marcussmith2626 said:
All stock rom firmware is in my firmware thread - you can access it either by clicking the link in my signature and selecting the firmware thread for your phone or go to the top of the dev section - please search and you will find
Click to expand...
Click to collapse
sir thankk you for your advise now my cm 11 boot with simcard.....
sir please help me
sir I don't have PC and I am getting same problem in my Samsung galaxy y young sir please help me what can I do now please sir how can I solve this problem without PC sir please I am requesting to you
pls help me
When I receive an incoming call, the screen remains blank for about 5 seconds to display the options to answer or reject the call. How can I reduce that time?

[HELP]SAMSUNG N900L Galaxy Note 3 FLASHING FOR NEWBS LIKE ME

Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:
macoyism said:
Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:
Click to expand...
Click to collapse
1. You can download the latest firmware for your device: HERE. Follow the pics attached (The download is slow like a turtle but be patient).
2. These firmware package is one package. Download, unzip it and flash it then using odin tool to brush into the radio PDA. Lil GUIDE: HERE.
hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033
macoyism said:
hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033
Click to expand...
Click to collapse
Seems all ok. Why you don't update your phone via OTA?
I'm going to try flashing it using Arya Mod v1.7 what kernel should I use ?
n900p
I have the same basebank k1..... did this stock work perfect...
Un-bricked Galaxy Note 3 (SM-N900L) on KitKat 4.4.2 - N900LKLUFNK1:
* Download link: http://youtu.be/FGoqxX3BwA0
* Flash by ODIN 3.07 or up
* Based on Official Firmware N900LKLUFNK1
* Android version KitKat 4.4.2
* Rooted by SuperSU 2.45
* KNOX Removed
* Fixed all Korean:
- Removed Korean characters on Dial Pad
- Add (+) sign for International call on (0) Dial Pad
- Removed all Korean apps
- Fixed Network Mode (2G/3G/LTE/Auto)
- 90 languages + ASOP for EUROPE
* Facebook::https://www.facebook.com/pages/Galaxy-Note-3-LTE/749184655174799
macoyism said:
hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033
Click to expand...
Click to collapse
User wants $ 25 for the password to the archive...
Don't join XDA if you wanted to get Paid... Trust me.. you will get nothing
Regards
macoyism said:
Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:
Click to expand...
Click to collapse
Same problem with me.I have the same korean varient with LG u+ logo. I am using it in Pakistan. Read almost every thread regarding korean variants but there is'nt any method specific for SM-N900L.
So are you wanting to flash a custom recovery e.g. twrp and then install a custom rom?
Sorry if I misunderstood your question.
Chris
Hokage-Sama said:
Same problem with me.I have the same korean varient with LG u+ logo. I am using it in Pakistan. Read almost every thread regarding korean variants but there is'nt any method specific for SM-N900L.
Click to expand...
Click to collapse
Hello, new here and was trying to do the same thing on my SM-N900L unit, i want to install a custom ROM so i can remove all of those korean apps and fix the API for my network.
cmro said:
So are you wanting to flash a custom recovery e.g. twrp and then install a custom rom?
Sorry if I misunderstood your question.
Chris
Click to expand...
Click to collapse
Hello Chris,
same here, if anyone can post some procedure on how we can install custom firware and rom on our SM-N900L unit that is under Lollipop.
thanks a lot
ab.normal said:
Hello, new here and was trying to do the same thing on my SM-N900L unit, i want to install a custom ROM so i can remove all of those korean apps and fix the API for my network.
Hello Chris,
same here, if anyone can post some procedure on how we can install custom firware and rom on our SM-N900L unit that is under Lollipop.
thanks a lot
Click to expand...
Click to collapse
Do you have a custom recovery and is your mobile rooted?
Hokage-Sama said:
Do you have a custom recovery and is your mobile rooted?
Click to expand...
Click to collapse
Hello Hokage-Sama,
i think the custom recovery installed is TWRP
did some further searching online and i was able to restore the firmware from lollipop down to kitkat, from there i was able to download a md5 file which i ran from Odin and i was able to root the phone however, its based on kitkat and im still searching if there are any for lollipop and the only one i see if the 1 poser who asks for a $25 payment to update a N900L to N9005.
... was hoping if i can use Aryamod custom rom but i think my phone should be on a rooted lollipop under N9005 model only.
hope this made sense
thank you
Root is not required to install a custom rom.
If your phone can run 9005 ROMs, you could try editing the updater script to include your phone.
audit13 said:
Root is not required to install a custom rom.
If your phone can run 9005 ROMs, you could try editing the updater script to include your phone.
Click to expand...
Click to collapse
hi, thanks for the reply
apologies i dont know what you meant to edit hte updater script.
Sorry i have a N900L and based on reading some other threads only
DarkLord Note 5 RC2.1 or Phronesis v5.1 will work on my unit.
before installing the rom i should have a custom recovery right? but to get a custom recovery my bootloader needs to be unlocked first.
i am currently stuck on unlocking my bootloader, i downloaded samsung usb drivers, go to recovery mode, then insert the usb on the phone, i hear a sound when you connect a device on the pc and saying that the device is ready to use but i am unable to see the contents of my phone.
am i doing it correctly?
thank you once again
Are you sure the phone's bootloader is locked? If the bootloader is not locked, do not use any unlocking apps because this will proably brick the phone.
Just install TWRP from Odin. I don't recommend Philz Touch or CWM as I don't they have been updated for a while.
http://forum.xda-developers.com/gal...ecovery-twrp-materialized-dark-light-t3153614
audit13 said:
Are you sure the phone's bootloader is locked? If the bootloader is not locked, do not use any unlocking apps because this will proably brick the phone.
Just install TWRP from Odin. I don't recommend Philz Touch or CWM as I don't they have been updated for a while.
http://forum.xda-developers.com/gal...ecovery-twrp-materialized-dark-light-t3153614
Click to expand...
Click to collapse
i tried the twrp custom recovery based on the link you sent above thru Odin, it messed up my custom recovery, when i tried to go there it said something like unable to load recovery and goes to download mode and the phone wont startup normally.
is that a sign that my bootloader is locked since i cant install the custom recovery?
used my standard backup recovery to bring back the phone.
i wonder how other SM-N900L users installed their roms.
any other help would be greatly appreciated
thanks a lot
When you flashed twrp, did Odin say the installation was successful?
Download the tar version of twrp for your device from here: twrp.me .
In Odin, do not check anything except f.reset time. Flash twrp and, when you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, wait 5 seconds, replace battery, now use button combination to boot into recovery.
thanks for the help, was finally able to install twrp custom recovery. the latest version wont work on SM-N900L, i used TWRP-2.8.6.0-N900S version and it worked! im now running on Darklord N5 custom rom for Note3 and loving it!!!

N910g unresponsive after flashing Dr.Ketan ROM I N5 Port seandroid error

Hello,
I tried flashing my n910g with "Dr.Ketan ROM I N5 Port I Full Theme store support I S6 Edge features L12" ROM.
After flashing, I also flashed the bootloader and modem mentioned by Dr.Ketan. The phone is stuck at the bootscreen with an error seandroid.
RECOVERY BOOTING Recovery is NOT SEANDROID ENFORCING Set Warrenty Bit. I used cwm recovery before flashing my ROM and my phone was already rooted with cf autoroot before flashing this rom.
I wanted to try this rom in my phone and I'm a noob. Can somebody please help me with this ? It'd be a great favor.
I'm a noob, please help me with the appropriate files/instructions so that I can start using my phone. As of now, my phone is still stuck at the boot screen with that error.
Download Stock firmware from sammobile for your phone and flash it with ODIN.
dork997 said:
Download Stock firmware from sammobile for your phone and flash it with ODIN.
Click to expand...
Click to collapse
Does it mean I would not be able to use the N5 port rom?
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Funny Sykes said:
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Click to expand...
Click to collapse
i have no idea about note 5 port as i have never used it.
dork997 said:
i have no idea about note 5 port as i have never used it.
Click to expand...
Click to collapse
Alright, now that my n910g is stuck with that I tried installing some nameless rom and the screen doesn't really work. I need to use Spen always even to click on the dial button.
Can you suggest any good rom for Note 4 N910g?
I really need to give my phone a fresh start as this will be my first time to flash my phone.
Please help!!
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Shane_Picardo said:
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Click to expand...
Click to collapse
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
downloaded the mentioned stock rom and then tried flashing the dr.ketan rom.
It always kept saying android media stopped working and when i click ok, again the same pop up and nothing works.
No icons are displayed but the edge+ feature was showing.
What is the best way to have this rom ?
Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
Did you try my method? Did it work?
Used coh4 baseband which you said. But could not find the proper root file. Please help with the root and cwm files for 910g which work. Then i will try flashing dr.ketan rom
Yes I tried, now I am using the same baseband you have mentioned which is Australian, now the touch doesn't work well but with s pen it works fine. What to do ?>
Shane_Picardo said:
Did you try my method? Did it work?
Click to expand...
Click to collapse
"Shane_Picard"
Downloaded the stock from from sammobile and my phone was able to boot successfully. But the problem is that ever since, I tried flashing twrp recovery to flash dr.ketan rom which did not work. My phone's touch is really not working well. I have enabled touches in developer options and confirm that my s-pen works fine but when I touch the phone, it gets detected 1 cm below where I actually touch. This problem might have been created when I flashed twrp recovery because that was the first time I saw this issue.
Please help how to fix this ?

N9005 doesn't work with custom roms?

Hello,
I have a N9005 that I'm tryin to install a custom ROM (I have another one already with Norma v29 working perfectly). In this one I flashed the original 5.0 firware and then tried to root, isntall custom recover, custom rom, etc., as I normally do. With this phone I can root and install custom recovery but every custom ROM i tried I always have a bootloop on Galaxy Note 3 screen (tried Norma, Phonesis, etc.).
I can reflash to an original ROM but don't understand why it doesn't work with a custom ROM.
Can any one help me? I even tried to change bootloader on a specfific tutorial for Norma v29.
Thank you in advance!
Boot to download mode and check the model first .
Is this a used phone ??
Hello. Yes is a used phone. The model is a SM-9005. The roms I'm using are for this model. I tried again a Lolipop 5.0 stock rom, then root, then recovery (until here everything works). Then applied Norma V29 and i'm stuck again at the Galaxy Note 3 screen, the blue led starts to blink and then the phone restarts. Really can't understand. Even tried the same memory card from my Note. Well the only difference is that one is 16GB and this one is 32GB. Any stock rom work perfectly but didn't want to use them.
Can it be that the internal memory size is causing the issue? is the only difference....can someone help?
Well my original phone is a 32GB. Don't know why the hell I was thinking 16GB... so most weired. If someone could help will be great. It's working with the stock 5.0 and rooted with CM-AUTO.
before flashing custom firmware you should enter the recovey and make complete format for both cache and data partitions.
after the firmware install it might take the system up to 10 minutes to boot.
Thank you for the answer. i'm doing all the steps (I changed roms on Note 3 for some time now). This one startups on the Galaxy Note 3 Screen, the led starts to blink (like 4-5 times) and restarts himself. So is not waiting time. made factory resets, all the wipes, even a script I found for fixing EFS. When I flash a Android 4.4 or 5.0 stock from SamMobile just works.
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
adel alsayed said:
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
Click to expand...
Click to collapse
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Dan0v said:
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Click to expand...
Click to collapse
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
adel alsayed said:
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
Click to expand...
Click to collapse
Suggests you are using the wrong TWRP version .
Read the roms instructions/ search thread .
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
golalmo said:
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
Click to expand...
Click to collapse
i use it already but given faild my phone is n90005 32 gb I don't know what can I do for install ux 9.7 rom
Does any other rom install ??
JJEgan said:
Does any other rom install ??
Click to expand...
Click to collapse
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
adel alsayed said:
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
Click to expand...
Click to collapse
then check the md5 of magma nx9.7..!
read the how to install in tge magma rom.. sometimes something small will interrupt the flashing
fabio.teles said:
Hello,
I have a N9005...
Click to expand...
Click to collapse
I thought I'd clean up the phone.
I installed via ODIN official fw = Lollipop.
Then root + TWRP 3.1.1.
Next installing custom rom RR 7.1.
ERROR
I resolved as follows:
Installing "CP_N9005XXUGBPB1_MODEM.tar" + "BL_N9005XXUGBPB2_BOOTLOADER.tar"
Now RR installation is successful!
But "not SIM" (can not enter PIN)
Solution:
Override file "libsec-ril.so". Here is: Root / System / lib / libsec-ril.so
Done - it works!
Files here: https://ulozto.cz/!M6PZA7EKQHNe/xda-zip
It helped me. Will it help you too?
*******
Thanks @"Anon_Help_You" !!!
(https://forum.xda-developers.com/galaxy-note-3/help/solution-lineage-os-sim-t3640689)

Need help with a galaxy s4 gt-i9505

Hi everyone,
just a long-time forum-lurker in the dark here, now I'm here asking for help to restore my galaxy s4.
Here's the story:
gt-i9505 no brand, italian official firmware 4.4.4 (kitkat), never updated, only used towelroot to gain rood adn unistall couple of unused apps.
everything worked fine
Then i decided to upgrade to lollipop.
downloaded last samsung lollipop rom for my phone from sammobile, made a full backup via TWRP Recovery, and installed lollipop via Odin.
Then the nightmare begun :
1st problem, no modem, no connection, only wifi, i restored EFS, still not working, reinstalled modem via odin and then i got my imei and connection again.
2) think i've tried to change the rom to a custom downloaded here (i don't even remember the name), then i tried couple other roms.
this as far as i remember
Now the phone has a samsung original lollipop rom, wifi won't turn on, data not working, knox status is obviously altered (so i cannot restore it via kies or whatever the software name is now) BUT It overheats a lot after few minutes and i'm forced to shut it off to not damage it.
I'd like to restore it to a full working condition, i think i've messed up with bootloaders, modems and roms from different android versions.
can anyone help ?
Current status is
model : gt-i9505
android security patch : 2016:11-01
Baseband version : I9505XXUGNK2
kernel version : 3.4.0-5978264 [email protected] #1 Wed Nov 16 19:05:34 KST 206
build version : LRX22C.I9505XXUPK2
Android SE state : enforcin SEPF_GT-i9505_5.0.1-1_0070 Wed Nov 19:10:21 2016
SEcure Boot status Type:SAmsung
Knox VErsion 2.3
Hey, @dokrobei
Take a look on my Guide.
You need the guide clean install from the scratch. Please read it carefully till the end. There avaible links with all necessary stuff like modem/bootloaders/stock rom-firmware/recommend customs roms etc.
Hi @Retrial, thanks for the answer..
I've managed to reinstall stock KitKat 4.4.2 and working modem drivers, following another tutorial here. Now Wi-Fi, 3g and bt works fine, BUT the phone overheats a lot. It's not a battery problem and sure it's software related 'cause it wasn't like this before my stupid first attempt to upgrade to lollipop.
I've searched the forum for the overtheating near the flash zone problem, some say that is a microsd problem (wich I removed), some other that's a battery problem (wich is not in my case).
Do you think I should start from scratch again following your guide? IHow do I know wich modem / bootloader is right for my phone? I think the problem is there, maybe wrong modem version..
dokrobei said:
Hi @Retrial, thanks for the answer..
I've managed to reinstall stock KitKat 4.4.2 and working modem drivers, following another tutorial here. Now Wi-Fi, 3g and bt works fine, BUT the phone overheats a lot. It's not a battery problem and sure it's software related 'cause it wasn't like this before my stupid first attempt to upgrade to lollipop.
I've searched the forum for the overtheating near the flash zone problem, some say that is a microsd problem (wich I removed), some other that's a battery problem (wich is not in my case).
Do you think I should start from scratch again following your guide? IHow do I know wich modem / bootloader is right for my phone? I think the problem is there, maybe wrong modem version..
Click to expand...
Click to collapse
First of all there is no need to still be on KitKat...a lot of apps don't support Kitkat nowdays...and is outdated.
I will recommend first to proper upgrade to Lollipop stock and then use some of the latest android Pie Custom JDC Roms by following my complete guide. As I said above there is a full guide with links and very well explained steps. The latest Firmware for our S4 i9505 is QK1 - No matter which country you will choose, and it's recommened to have the latest. Just read it carefully till the end and check the asterisks.
The overheating it may be no compatible Modem/Bootloader since you messed up with Lollipop. To check what Modem and Bootloder you can simply install "Device HW Info" or "Phone Info" app and check.
Let me know how it goes, and if you have any question or problem feel free to ask. Good Luck :fingers-crossed:
Retrial said:
First of all there is no need to still be on KitKat...a lot of apps don't support Kitkat nowdays...and is outdated.
I will recommend first to proper upgrade to Lollipop stock and then use some of the latest android Pie Custom JDC Roms by following my complete guide. As I said above there is a full guide with links and very well explained steps. The latest Firmware for our S4 i9505 is QK1 - No matter which country you will choose, and it's recommened to have the latest. Just read it carefully till the end and check the asterisks.
The overheating it may be no compatible Modem/Bootloader since you messed up with Lollipop. To check what Modem and Bootloder you can simply install "Device HW Info" or "Phone Info" app and check.
Let me know how it goes, and if you have any question or problem feel free to ask. Good Luck :fingers-crossed:
Click to expand...
Click to collapse
ok,so
downloaded latest italian rom wich is I9505XXUHPK2_I9505ITVHPL1_ITV from sammobile and installed it via odin.
installed compatible bootloader and modemas per your guide (PK2)
rebooted to check if everything was working using stock before going to custom...and...
it started overheating as soon as i tuned on wifi. i only managed to install phoneinfo to check wich modem i have as you suggested, then i had to turn the phone off it off cause it became reeally hot and i thought i could break it. modem chip is "mdm9215m". any suggestion? maybe i should try to instale all the lollipop modems / bootloaders from your post...
dokrobei said:
ok,so
downloaded latest italian rom wich is I9505XXUHPK2_I9505ITVHPL1_ITV from sammobile and installed it via odin.
installed compatible bootloader and modemas per your guide (PK2)
rebooted to check if everything was working using stock before going to custom...and...
it started overheating as soon as i tuned on wifi. i only managed to install phoneinfo to check wich modem i have as you suggested, then i had to turn the phone off it off cause it became reeally hot and i thought i could break it. modem chip is "mdm9215m". any suggestion? maybe i should try to instale all the lollipop modems / bootloaders from your post...
Click to expand...
Click to collapse
After every flash the device become hot. Let the rom settle for a while.
If you have PK2 Firmware then you need PK2 Modem and Bootloader. So no, don't try other modem/bootloader.
Retrial said:
After every flash the device become hot. Let the rom settle for a while.
Click to expand...
Click to collapse
I flashed it last night and checked if it was working this morning. I'm sure the high temps are not related to the usage or to the battery. It become hot eachtime i turn on wifi. Havent tried with data but I think it will be the same thing.

Categories

Resources