Related
I managed to get root, and with the help of the KNOX Disabler app, I disabled Knox nonsense, using RootExplorer, deleted the Knox files from /system/apps folder.
You need to flash Philz_touch_5.15.0-n7100.tar.md5 recovery, reboot. Switch off phone. Start phone in recovery mode. Flash CWM-SuperSu-v0.99.zip in Philz_touch_5.15.0-n7100.tar.md5.
Restart phone and run previously installed KNOX Disabler. I downloaded and installed the version 1.0.1.
Let me know how you get on.
Thanks to the dev owners of the said recovery, CWM-SuperSu and KNOX Disabler.
I am a happy user again. Lol!
how about warranty bit status in download mode? still 0?
sora9009 said:
how about warranty bit status in download mode? still 0?
Click to expand...
Click to collapse
I did not care about Knox warranty, however following your question I went into download mode. This is what I see:
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: Yes (12 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
WARRANTY BIT: 0
That is all the information at present. I hope this answers your question.
Cheers.
thanks for answering.:good:
sora9009 said:
thanks for answering.:good:
Click to expand...
Click to collapse
You are welcome.
YOSEFE said:
I managed to get root, and with the help of the KNOX Disabler app, I disabled Knox nonsense, using RootExplorer, deleted the Knox files from /system/apps folder.
You need to flash Philz_touch_5.15.0-n7100.tar.md5 recovery, reboot. Switch off phone. Start phone in recovery mode. Flash CWM-SuperSu-v0.99.zip in Philz_touch_5.15.0-n7100.tar.md5.
Restart phone and run previously installed KNOX Disabler. I downloaded and installed the version 1.0.1.
Let me know how you get on.
Thanks to the dev owners of the said recovery, CWM-SuperSu and KNOX Disabler.
I am a happy user again. Lol!
Click to expand...
Click to collapse
Sorry--but this is a bit ambiguous--
"Flash CWM-SuperSu-v0.99.zip in Philz_touch_5.15.0-n7100.tar.md5."
I follow that we Flash CWM-Supersu-v.0.99. zip in Philz Recovery[which we have previously flashed to device with ODIN]--but what is the tar.md5 bit about--surely we don't reflash Philz in ODIN, again--or, are you simply referring to the, now, on board, CWM Recovery?
Not trying to be a 'smart-alec' just not following.
be a smart user and assume that he just copy paste the previous line because he dont want to retype the recovery name.
Hey, @YOSEFE, just another question--which ROM were you using before you Flashed this latest leak?
Reason I'm asking is that, I am currently on Dr.Ketan's 'hybrid' ROM which is a mix of XXMI6, and XXMJ2 plus mods taken from latest Note3 firmwares--and, it's great with many things not available to standard Note 2.
I would like your opinion of this latest leak firmware, XXUEMJ5, and how it compares--presumably it doesn't have any of the fancy Note 3 'gizmos'???
But, is it fast, smooth, clean, not buggy. etc....
BTW I'm not saying that Dr. K's ROM is not super fast, smooth, clean, etc...in fact it's excellent but, just wanting a comparison, to see if there was any good reason to Flash it.
haybill said:
Sorry--but this is a bit ambiguous--
"Flash CWM-SuperSu-v0.99.zip in Philz_touch_5.15.0-n7100.tar.md5."
I follow that we Flash CWM-Supersu-v.0.99. zip in Philz Recovery[which we have previously flashed to device with ODIN]--but what is the tar.md5 bit about--surely we don't reflash Philz in ODIN, again--or, are you simply referring to the, now, on board, CWM Recovery?
Not trying to be a 'smart-alec' just not following.
Click to expand...
Click to collapse
Philz Recovery will have already been flashed by others, however I mention it because there will be those who have not flashed anything past the firmware or ROM.
If CWM Recovery works for anyone that is fine too, but I have flashed Philz Recovery on advice somewhere in a thread. (Lazy me, can't say which thread).
edan1979 said:
be a smart user and assume that he just copy paste the previous line because he dont want to retype the recovery name.
Click to expand...
Click to collapse
You are 100% correct.
haybill said:
Hey, @YOSEFE, just another question--which ROM were you using before you Flashed this latest leak?
Reason I'm asking is that, I am currently on Dr.Ketan's 'hybrid' ROM which is a mix of XXMI6, and XXMJ2 plus mods taken from latest Note3 firmwares--and, it's great with many things not available to standard Note 2.
I would like your opinion of this latest leak firmware, XXUEMJ5, and how it compares--presumably it doesn't have any of the fancy Note 3 'gizmos'???
But, is it fast, smooth, clean, not buggy. etc....
BTW I'm not saying that Dr. K's ROM is not super fast, smooth, clean, etc...in fact it's excellent but, just wanting a comparison, to see if there was any good reason to Flash it.
Click to expand...
Click to collapse
I was on XXMI6. The ROM can be a bit laggy. As someone pointed out to me, it is only a test firmware. Nevertheless, it is smooth enough for my daily use.
There are obviously no Note 3 goodies on the ROM. If those are very important to you, and considering the amount of trouble you have gone through to flash Doc's ROM, I would say keep Doc's ROM.
Thanks for the info @YOSEFE, The Good Doctor's latest work is pretty cool and definitely what I want. Sometimes we get caught up in Flash mania and need to find a good solution and stick with it.
All the best.
Sent from my GT-N7100 using xda app-developers app
edan1979 said:
be a smart user and assume that he just copy paste the previous line because he dont want to retype the recovery name.
Click to expand...
Click to collapse
Thanks for your input--nice to know some of us are smart alecs.
I agree with what you have said below.
haybill said:
Thanks for the info @YOSEFE, The Good Doctor's latest work is pretty cool and definitely what I want. Sometimes we get caught up in Flash mania and need to find a good solution and stick with it.
All the best.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
how can i use efs professioal to fix 0049 imei problem?
does any body know how to use it?
OP:
R u on mj5?
Knox Disabler only disables notifications?
Thx
Sent from my GT-N7100 using Tapatalk
I'm on MJ5.
I have no knox notifications anymore.
I also used Root Explorer to search for all knox files and references to knox, I then deleted all these. My phone still works well.
No guarantees from me though. I took a risk, thankfully, my phone did not suffer any problems.
Sent from my GT-I9505 using xda app-developers app
I am just an end user like most people. I don't know anything about EFS issues.
I'm unable to comment on the question you asked.
Sent from my GT-I9505 using xda app-developers app
YOSEFE said:
I managed to get root, and with the help of the KNOX Disabler app, I disabled Knox nonsense, using RootExplorer, deleted the Knox files from /system/apps folder.
You need to flash Philz_touch_5.15.0-n7100.tar.md5 recovery, reboot. Switch off phone. Start phone in recovery mode. Flash CWM-SuperSu-v0.99.zip in Philz_touch_5.15.0-n7100.tar.md5.
Restart phone and run previously installed KNOX Disabler. I downloaded and installed the version 1.0.1.
Let me know how you get on.
Thanks to the dev owners of the said recovery, CWM-SuperSu and KNOX Disabler.
I am a happy user again. Lol!
Click to expand...
Click to collapse
LOL , Why we need KNOX Disabler ? Installing that app ask fr root permission . And if i am rooted why do i need to disable it its already disabled.
BTW Not work on Note 7100 4.3 JB
Formingus said:
LOL , Why we need KNOX Disabler ? Installing that app ask fr root permission . And if i am rooted why do i need to disable it its already disabled.
BTW Not work on Note 7100 4.3 JB
Click to expand...
Click to collapse
You are too late in responding to this.
That method you refer to was one of the two or so of available means. Since then, Chainfire has released superuser version that incorporates a disabler or uninstaller.
The why
A lot of this has been said in other threads, however I decided to gather all the up-to-date (as of Jun 17, 2014) instructions and info in this thread to alleviate fears of the infamous 'KNOX WARRANTY VOID 0x1' and help people with the process. People with tripped KNOX can of course use this as well, however it won't untrip their devices, duh.
The cheers
First of all big cheers for Pinkie Pie (person who discovered the Linux kernel vulnerability that makes rooting without tripping KNOX possible), geohot (person that used the vulnerability to make a rooting app), chainfire (developer of SuperSU), rovo89 and Tungstwenty (developers of Xposed). Go and donate to these guys if you can!
The what
This post will tell you how to upgrade your P605 to 4.4.2, if you haven't already. And how to install SuperSU and Xposed all the while keeping your KNOX counter at 0x0, CURRENT BINARY: Samsung Official and SYSTEM STATUS: Official!
Note: The versions in this text are just for reference - telling you what versions already worked. New ones will surely also work, so you should usually download the newest available.
The how
Firmware
4.4.2 NEE P605XXUCNE2 (any of the current 4.4.2 firmwares should be fine, although Samsung might use an updated kernel for the future versions, disabling towelroot)
From http://forum.xda-developers.com/showpost.php?p=53092676&postcount=1
Simple instructions available here http://www.sammobile.com/firmwares/3/?download=30325 (you can also download the firmware from here, but download is slow for free accounts)
Root
From http://towelroot.com
No special instructions (it's a 1-click root)
SuperSU
Version 1.99.rc5 from http://download.chainfire.eu/448/SuperSU/
Extract Superuser.apk (in 'common') from the zip, install and run
Answer yes to the Disable KNOX prompt (don't worry, KNOX will not be tripped)
Xposed
From http://repo.xposed.info/module/de.robv.android.xposed.installer (version 2.6.1)
No special instructions
The victory
Congrats! Now you should be on a rooted, SuperSUed, Xposed KitKat with warranty left intact! However before sending it to Samsung, e.g., for repairs, you should flash your original firmware, of course.
Can this be made to work with the SM-P600 on Android 4.3 unrooted? Any help will be appreciated. This would be a dream.
no.0ne said:
SuperSU
Version 1.94 from Google Play (Jun 17, 2014)
Answer yes to the Disable KNOX prompt (don't worry, KNOX will not be tripped)
At the end it will say it failed, however it will be working!
If you are annoyed by the 'failed' message for some reason, download an updated version from http://download.chainfire.eu/448/SuperSU/ (you'll have to flash it manually though) which supposedly fixes it.
Click to expand...
Click to collapse
Just Download specified zip and extract superuser.apk from common folder and install as normal program, don't download play version
İ am gonna try and write my appreciate ) thanks in advance
It did work . Thanks to you and that steps i have rooted kitkat knox is 0*0 what i was waiting for last 5 months. Thank you so much now i can use my tablet in full capacity
iPhone 'den Tapatalk aracılığı ile gönderildi
Eudeferrer said:
Can this be made to work with the SM-P600 on Android 4.3 unrooted? Any help will be appreciated. This would be a dream.
Click to expand...
Click to collapse
It seems that so far people have had no success using towelroot on P600. Wait and hope it will change...
Hello, i want to do this on clean tablet, so i want to do clean install , how can i clean it all had before, from odin? And is nee nordic kitkat rom suitable for all p605 , i am frightened about boatloader problem and soft brick before i done i wanted to ask. Thanks in advance.
yararli said:
Hello, i want to do this on clean tablet, so i want to do clean install , how can i clean it all had before, from odin? And is nee nordic kitkat rom suitable for all p605 , i am frightened about boatloader problem and soft brick before i done i wanted to ask. Thanks in advance.
Click to expand...
Click to collapse
You can wipe the tablet from recovery:
Turn tablet off
Turn it on holding Volume Up + Power Button until you see something on the screen
Wipe data/factory reset
Reboot
NEE will be fine for all P605, however I don't know if it works with something like P605V (US Verizon).
no.0ne said:
You can wipe the tablet from recovery:
Turn tablet off
Turn it on holding Volume Up + Power Button until you see something on the screen
Wipe data/factory reset
Reboot
NEE will be fine for all P605, however I don't know if it works with something like P605V (US Verizon).
Click to expand...
Click to collapse
Should i do this before or after kitkat installation ? And where can i find usb installation of p605 when it is taken into download mode for pc to recognize the tablet.
I have no windows pc now im gonna do that on thursday ı was waiting this topic for 4 months thank you so much
iPhone 'den Tapatalk aracılığı ile gönderildi
yararli said:
Should i do this before or after kitkat installation ? And where can i find usb installation of p605 when it is taken into download mode for pc to recognize the tablet.
I have no windows pc now im gonna do that on thursday ı was waiting this topic for 4 months thank you so much
iPhone 'den Tapatalk aracılığı ile gönderildi
Click to expand...
Click to collapse
First you wipe then you flash
You can download the driver from the Samsung website, e.g., http://www.samsung.com/us/support/owners/product/SM-P605VZKEVZW (don't worry that it is on the US page, the driver is the same for all Samsung devices)
Glad I can help. I waited for root quite long myself :victory:
In the thread discussing towelroot on P605, people claimed installing xposed would change your binary to custom. That's holding me back for now, can you confirm that it stays official?
Matthias.ja said:
In the thread discussing towelroot on P605, people claimed installing xposed would change your binary to custom. That's holding me back for now, can you confirm that it stays official?
Click to expand...
Click to collapse
It only makes it custom inside of the ROM. In download mode it shows Official. You can also use the Wanam xposed module to change it back to Official in the ROM.
valexi said:
It only makes it custom inside of the ROM. In download mode it shows Official. You can also use the Wanam xposed module to change it back to Official in the ROM.
Click to expand...
Click to collapse
alright, thanks!
so if i have some warranty issues, wiping everything from recovery or re-flashing the unrooted stock ROM would make everything official again, right? I know I sound like a scared little girl, but I just really don't want to risk my warranty on this rather expensive device
Heyy its wonderful i did it but there is a problem about kitkat rom i saw a little lags and the biggest problem is whatsapp says it is not compatible with this device also twitter in playstore what should i do thnx for your all help
iPhone 'den Tapatalk aracılığı ile gönderildi
valexi said:
It only makes it custom inside of the ROM. In download mode it shows Official. You can also use the Wanam xposed module to change it back to Official in the ROM.
Click to expand...
Click to collapse
So i just tried and installed xposed, and funnily enough, my system status stayed official, even inside the ROM. I won't complain though..
Hello i should restore system defaults how should i do directly by using recovery mode can i clean systam cache and ... Or before it should i unroot from su?
iPhone 'den Tapatalk aracılığı ile gönderildi
To make sure; unroot and then factory reset
Matthias.ja said:
So i just tried and installed xposed, and funnily enough, my system status stayed official, even inside the ROM. I won't complain though..
Click to expand...
Click to collapse
As long using stock recovery and it will stay Official. Just custom recovery will give custom.
dt33 said:
As long using stock recovery and it will stay Official. Just custom recovery will give custom.
Click to expand...
Click to collapse
No it doesn't. You dont seem to understand difference between "system status" in Download mode or inside of the ROM.
Here is couple of pictures to make you understand.
In the picture below you can see system status official. This will change, if you install CUSTOM ROM or CUSTOM RECOVERY. Towelroot does not change any of these data here:
In the picture below you can see Device status "custom". This can change to custom if you ROOT the device and/or install SuperSU or Xposed framework. This has NOTHING to do with the status in the Download mode as seen in the first picture.
I hope that people wouldn't mix these things, because they are rather easy to understand. Talking about things that you dont really understand will cause confusion and makes people asking more stupid questions.
Thank you!
valexi said:
No it doesn't. You dont seem to understand difference between "system status" in Download mode or inside of the ROM.
Here is couple of pictures to make you understand.
In the picture below you can see system status official. This will change, if you install CUSTOM ROM or CUSTOM RECOVERY. Towelroot does not change any of these data here:
In the picture below you can see Device status "custom". This can change to custom if you ROOT the device and/or install SuperSU or Xposed framework. This has NOTHING to do with the status in the Download mode as seen in the first picture.
I hope that people wouldn't mix these things, because they are rather easy to understand. Talking about things that you dont really understand will cause confusion and makes people asking more stupid questions.
Thank you!
Click to expand...
Click to collapse
Pls, explain how come it stays Official after rooted with towelroot, installed SuperSu and Xposed?
http://forum.xda-developers.com/showpost.php?p=53452193&postcount=33
dt33 said:
Pls, explain how come it stays Official after rooted with towelroot, installed SuperSu and Xposed?
http://forum.xda-developers.com/showpost.php?p=53452193&postcount=33
Click to expand...
Click to collapse
I'm not quite sure, but it seems that in some cases the ROM can detect if it's rooted.
For me it changed to "Custom" after rooting with towelroot and SuperSU installation. I changed it back to Official with Wanam xposed.
Hi XDA society and devs.
So I've moved to an S4 and I've already rooted it.
Sadly, KNOX figured it out so I'm at 0x1, however, this isn't an issue, I believe KNOX is only important for warranty purposes?
But anyway, I have rooted and installed custom recovery but what I want to ask is how will I go about installing this specific rom on my I9505?
http://forum.xda-developers.com/showthread.php?t=2283194
I'm really confused as to what I'm supposed to do, my BUILD number ends in FNB8 and this rom requires NGE8, so is it safe for me to install it without that number?
Do I need to do anything extra to install this rom or can I just move it directly to my storage and install it?
On WanamLites website, it says that the modem and the bootloader for NGE8 is optional?
So does that mean, I don't need to do any ODIN flashes before and after installing this rom?
MY main question is, I have a I9505, rooted and TWRP, can I install this rom straight away?
I appreciate any help, I'm fairly new to this phone and I have done a bit of research but I'm still a little confused.
Thanks to anyone that can provide me with an explanation and perhaps a brief guide. <3
Long Live, XDA.
It does not matter what version you have on your phone (eg FNB8/NGE8), so you can ignore that completely.
The bootloader and modem are for people that still have the old bootloader installed. You don't have that because you have KNOX. So you can also ignore that part.
Just flash away.The instructions are in the first post of that thread.
Lennyz1988 said:
It does not matter what version you have on your phone (eg FNB8/NGE8), so you can ignore that completely.
The bootloader and modem are for people that still have the old bootloader installed. You don't have that because you have KNOX. So you can also ignore that part.
Just flash away.The instructions are in the first post of that thread.
Click to expand...
Click to collapse
Alright! Thank you for your speedy reply!
CorePrideX8 said:
Alright! Thank you for your speedy reply!
Click to expand...
Click to collapse
Your welcome.
I read that Wanam just updated the rom, but some people claim that it still has some bugs. Use the 2.6 version instead of the 2.7 untill everything is sorted out.
Hey friends:
im a normal member and everything above is only sharing
So you may get upset because of this thread
but i'll make things clear, everytime i open Q&A forum i see repeated questions everywhere
so here ill put some repeated answers about those stuff above
1. knox: well when you buy a new galaxy s5 the knox state will be 0*0 , but when you root your phone, flash custom recovery,custom kernel or custom rom this will trip knox and the knox state will be 0*1 and your warrenty will be void.
P.S: flashing firmware via odin will not trip knox
- so if you want to root without tripping knox you can go to this website : http://www.towelroot.com install apk by pressing the sign.
you will be able to root your phone quick from the phone itself but only if your phone on firmware from 3rd june or less
or your phone will not be rooted, but you can also root it by chainfire method from here: http://forum.xda-developers.com/showthread.php?t=2696537
you can also use mobile odin to flash firmwares but be carefull to be sure about your phone model.
you can install the app from playstore or from this thread: http://forum.xda-developers.com/showthread.php?t=1347899
P.S: firmwares can be downloaded from here : http://www.sammobile.com
i hope you Moderators understand me and dont get angry or close this thread because im only sharing and thought it will help my friends and the new forum members.
and at last im a member and i have the right to post what it usefull to xda community
hope that i helped.
Is is possible to use any Odin (I have 3 or 4 on my downloads) to flash stock over unlocked O2?
swipermusic said:
Is is possible to use any Odin (I have 3 or 4 on my downloads) to flash stock over unlocked O2?
Click to expand...
Click to collapse
to flash firmware you can use computer odin v3.09 and then extract the md5 file from the firmware zip and put it in AP in odin (and maybe different version of odin says PDA)
?
What about "System Status", in recovery I have a "System Status: Custom", knox 0x0 though, I'm rooted and use Xposed, what does this mean? how can I reverse it to "OFFICIAL", is this important when it comes to warranty?
THANKS! :highfive: :good: :fingers-crossed:
aguarello said:
What about "System Status", in recovery I have a "System Status: Custom", knox 0x0 though, I'm rooted and use Xposed, what does this mean? how can I reverse it to "OFFICIAL", is this important when it comes to warranty?
THANKS! :highfive: :good: :fingers-crossed:
Click to expand...
Click to collapse
well i think its not so important.
and look in settings>>about>>states
is it official or custom?
Galaxy_Guy said:
well i think its not so important.
and look in settings>>about>>states
is it official or custom?
Click to expand...
Click to collapse
Custom
aguarello said:
Custom
Click to expand...
Click to collapse
means your system has been modified and no OTA's will be available
?
wajiman said:
means your system has been modified and no OTA's will be available
Click to expand...
Click to collapse
I don't care about OTA's, but how does this impacts warranty? Can be reversed to "Official?
Thanks man I really appreciate your help.
aguarello said:
What about "System Status", in recovery I have a "System Status: Custom", knox 0x0 though, I'm rooted and use Xposed, what does this mean? how can I reverse it to "OFFICIAL", is this important when it comes to warranty?
THANKS! :highfive: :good: :fingers-crossed:
Click to expand...
Click to collapse
Use Triangle Away by chainfire, the system status will be reverted to Official.
This Thread - Fully redundant
pda4g said:
This Thread - Fully redundant
Click to expand...
Click to collapse
but its usefull for some new S5 users, its not necessary to be usefull for you.
?
Luckzao said:
Use Triangle Away by chainfire, the system status will be reverted to Official.
Click to expand...
Click to collapse
Will this be permanent or the status will be just "faked"?
thanks! :victory:
aguarello said:
Will this be permanent or the status will be just "faked"?
thanks! :victory:
Click to expand...
Click to collapse
AFAIK it will be fake, the only way to officially convert it to original is, uninstall root reboot and then reinstall root and SuperSU to user directory, not to system. This method worked for Roms prior to 3rd June.
wajiman said:
AFAIK it will be fake, the only way to officially convert it to original is, uninstall root reboot and then reinstall root and SuperSU to user directory, not to system. This method worked for Roms prior to 3rd June.
Click to expand...
Click to collapse
Ughhhh should have know that before updating and installing SuperSU to system... So no way to revert it if ROM is posterior to 3rd June? Even flashing official ROM again without root? :crying:
THANKS!
aguarello said:
Ughhhh should have know that before updating and installing SuperSU to system... So no way to revert it if ROM is posterior to 3rd June? Even flashing official ROM again without root? :crying:
THANKS!
Click to expand...
Click to collapse
Yes you can downgrade, i downgraded from NG2 to NE2 myself without problems. Just flash the NE2 rom with Odin and data factory reset afterwards. Then use TR to root again.
gee2012 said:
Yes you can downgrade, i downgraded from NG2 to NE2 myself without problems. Just flash the NE2 rom with Odin and data factory reset afterwards. Then use TR to root again.
Click to expand...
Click to collapse
Downgrade is possible without tripp knox,without problems?
AEkiz said:
Downgrade is possible without tripp knox,without problems?
Click to expand...
Click to collapse
Yes, KNOX is still 0x0 for me after the downgrade and the bootloader is downgraded to the NE2 one.
gee2012 said:
Yes, KNOX is still 0x0 for me after the downgrade and the bootloader is downgraded to the NE2 one.
Click to expand...
Click to collapse
Thanks for your reply
maybe I'll try tomorrow
gee2012 said:
Yes you can downgrade, i downgraded from NG2 to NE2 myself without problems. Just flash the NE2 rom with Odin and data factory reset afterwards. Then use TR to root again.
Click to expand...
Click to collapse
THANKS! To downgrade you just have to flash the NE2 rom? No more files? Sorry I'm kind of a noob
aguarello said:
THANKS! To downgrade you just have to flash the NE2 rom? No more files? Sorry I'm kind of a noob
Click to expand...
Click to collapse
Yes, i only flashed the older firmware without a extra PIT file or bootloader file. Make sure to untick Auto Reboot first in Odin, after the flash pull the battery, wait for 10-20 seconds, boot into recovery and do a data factory reset and then the phone should boot normal and both the firmware and bootloader are downgraded to NE2 and KNOX remains 0x0. At least it worked for me this way and i expect it to work for others the same way
Original Thread: http://forum.xda-developers.com/note-4/orig-development/sm-n910-cf-auto-root-t2897428
Credit: Chainfire
What you Need:
CF-Auto Root & Unzip Tool
Bump for newcomers.
Thanks for the video.
When is a good time to root? I want to wait until there is a cook ROM. Dont know if thats a good idea?
chong67 said:
Thanks for the video.
When is a good time to root? I want to wait until there is a cook ROM. Dont know if thats a good idea?
Click to expand...
Click to collapse
There is already a way to go back to stock if you ever do decide to root. Give it a try and if you want, you can flash stock again.
TWRP Recovery is now available for the Note 4 on Tmobile.
Does this raise Knox counter?
swordmastr54 said:
Does this raise Knox counter?
Click to expand...
Click to collapse
Yes it does
Sent from my SM-N910T using XDA Free mobile app
swordmastr54 said:
Does this raise Knox counter?
Click to expand...
Click to collapse
YES
Can you do a video on how to unroot or at least some step by step directions?
I've tried to find an answer to this but can't seem to get a 100% sure answer. If I simply root, that's all, no custom recovery. Will I still get OTA if/when Samsung/T-mobile release an update (ie Lollipop)? Thanks!
hd2Raz said:
I've tried to find an answer to this but can't seem to get a 100% sure answer. If I simply root, that's all, no custom recovery. Will I still get OTA if/when Samsung/T-mobile release an update (ie Lollipop)? Thanks!
Click to expand...
Click to collapse
Yes you should get OTA if you stay stock.
I had a Quick question about Twrp recovery
I have a tmobile note 4 sm-n910t. I have rooted with cf auto root and put the twrp recovery on and flashed the sd card fix. If I unroot via odin with the stock rom will android recovery be installed again or do I have to flash android recovery again to get rid of twrp recovery. If I do have to reflash android recovery again do you know where I can find it.
chris83282 said:
I have a tmobile note 4 sm-n910t. I have rooted with cf auto root and put the twrp recovery on and flashed the sd card fix. If I unroot via odin with the stock rom will android recovery be installed again or do I have to flash android recovery again to get rid of twrp recovery. If I do have to reflash android recovery again do you know where I can find it.
Click to expand...
Click to collapse
Yes it will install stock recovery and remove root.