[Q&A] [L7][ROM] Slim Bean 4.1.2 - Build3: Underdog - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

Q&A for [L7][ROM] Slim Bean 4.1.2 - Build3: Underdog
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [L7][ROM] Slim Bean 4.1.2 - Build3: Underdog. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

thx guy ^^
Thanks a lot for this beautiful rom ^^
so fast compare to the lg based rom !!
Congrat !

Well i was trying to flash this ROM and it seems that i'm done..
"Unforunately, Setup Wizard has stopped."
It gave me erros from google play store, gapps.. and i try to reboot to recovery and i can't..
So i'm stuck in here! Don't know what to do!

Guys can anyone show all progress on video because it's hard to understand, im new here :/

network not working
thanks

Problems with baseband
Hi!
So, about a year ago I bought this P700 from a guy I met, it had stock rom and my boyfriend put cm10.2 to try and make it better... From then on I've been on a roll, ROM after ROM to try and make it better. None worked so far, every one of them is very laggy and almost all apps FC - also I can't flash most kernels because phone gets on bootloop. I tried Slimbean build 2.2 (4.3.1) and it's the second best so far, apps FC but almost no lag. When I flash recommended kernels (for example the one for cm10.2 from tudorsirb and the TeamHackLG Experimental one for 4.3.x) phone gets stuck on bootloop.
THEN THIS ROM HAPPENED!! It's really great, and everything works fine, except for the things that a phone is supposed to do (calls, messages). I tried flashing most of the basebands - I'm in Portugal so I thought v10k would work because it worked for other ROMs, but it didn't work for this one - even tried the spanish one hoping for a miracle. I can't find the v10I baseband anywhere but the others aren't working! I even flashed through KDZ and it didn't work.
So basically, if anyone has any suggestions I would apreciate it since this is the only functional ROM so far....
Also if anyone has a link for V10I, I read somewhere it might work...
Thanks in advance!! And sorry for bad english.

Related

[Q&A] [ROM][OFFICIAL][KitKat 4.4.4][E610] PAC-ROM 4.4.4.RC-2

Q&A for [ROM][OFFICIAL][KitKat 4.4.4][E610] PAC-ROM 4.4.4.RC-2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][KitKat 4.4.4][E610] PAC-ROM 4.4.4.RC-2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
good work
great rom
which kernel i have to use?
this rom works perfectly on my e610, but sometimes get a black screen i think is the kernel i installed the rc3 skernel, and my config is 122 to 1000mhz ondemand, sorry for my bad english. what i have to do?
which kernel i have to use?
i tried RC3 but my phone get freeze in random times and i got to remove battery and restart?, any idea?
Using this PAC-ROM 4.4.4 RC-2 E610!
good rom, i noticed some things, in the alarm app, when you diselect a day and then other day, the first day appears, the included launcher does some weird things, like "poping" apps and disappearing the ones in "home screen" and the camera app crashes when taking a pic if something is changed
Kernel
I have problem with kernel in this ROM. After flash OC kernel my phone was died. When I turning it on, after bootanimation it not happens anything. Please help. Sorry for my English
Why?
where is the Nightly release? It's install this nightly pac rom. But Im not find. :/
Isthis will wor on my LG Optimus L7 P705?
3d graphics works in new version ? Sorry for my bad english
LG L5 Gapps not working
Hi, I get this message everytime I try to log into my gmail account: "Unfortunately, Google Account Manager has stopped."
I tried installing differents gapps, wiping everything that is to wipe, but nothing changes.
The rom looks REALLY GOOD, and I really want to keep it, but I need to fix gapps first. Can you help me, please?
foreignkey said:
Hi, I get this message everytime I try to log into my gmail account: "Unfortunately, Google Account Manager has stopped."
I tried installing differents gapps, wiping everything that is to wipe, but nothing changes.
The rom looks REALLY GOOD, and I really want to keep it, but I need to fix gapps first. Can you help me, please?
Click to expand...
Click to collapse
This bug is in the rom, not gapps
Hope @aidasaidas75 will fix it
SMILEVN said:
This bug is in the rom, not gapps
Hope @aidasaidas75 will fix it
Click to expand...
Click to collapse
Will fix rebuild with fix and http://wiki.cyanogenmod.org/w/Google_Apps there is gapps
link not working

[Q&A] [L7/L5][ROM][4.3.1][Discontinued] Slimbean build 2.2

Q&A for [L7/L5][ROM][4.3.1][Discontinued] Slimbean build 2.2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [L7/L5][ROM][4.3.1][Discontinued] Slimbean build 2.2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Help
You have a thread about CynogenMOD running in LG e615f ? thanks hope to hear you soon
Lock screen problem
I went to Security>Lock screen>Screen security>Screen lock to change the lock to a pattern lock but none of that works :\
I recorded a pattern and then clicked confirm after entering it twice but the Screen lock is still set to "slide" and when i lock the screen and unlock it i still have the slide thing... but when I went to above location again to change the lock screen back to pattern as it looked like I hadn't done it correctly, they ask to "confirm pattern" and then goes to the lock screen list (none, slide, pattern, password, PIN)
This is so annoying as there is zero security for the phone... Please fix it other than that the ROM is soooo great and so fast and smooth on my LG p700 thanks for that!
PS: I tried the PIN and password options too but ends with the same problem :\ Only slide and None works
Settings keeps force closing
I donno why it does that... flashed it in 10 different ways and no luck. Anyone with the same problem?
Sent from my LG P705
Hi!
I have a P700 and slimbean ROMs were the ones who worked best, especially 4.1.2 (but can't get signal) and this one. All other ROMs are very laggy and FC most of the apps - with CM11 it took 9,5 minutes to dial a number so it is really really bad. In this ROM, I can't flash any kernel - I tried the one tudorsirb recommends (for cm 10.2) and the TeamHack LG one for 4.3.X based ROMs). Everytime I flash them, I get bootloop.
So far, I tried:
-Dirty flashing the kernel (someone said it might work in another forum);
-Flash the kernel after wiping data, cache and dalvik cache;
-Doing a complete wipe and flashing the ROM, Gapps and then the kernel;
-Flashing through CWM, TWRP and Flashify...
NOTHING WORKS!!
I'm getting really frustrated, because this ROM has no OC, and I wanted OC 1,2 or 1,3. Also, zram would probably not do much harm either (I'm no expert it's just what i saw on other threads...).
Without flashing any kernel I changed the performance settings to ondemand, smartassh3 and smartassv2, I tried to use a lot of tweaks but nothing seems to work. The ROM works great for everything a phone should do (you know, calls and whatnots) but I want to play games and almost every app FC. I want to flash a kernel and solve the problem but I can't get the phone to get off the damn bootloop everytime I flash it!!!
Please help
Thanks in advance and sorry for bad english
i tried slimbean on my phone LG L7 P705
didnt read the IMEI
and i wish to know why

[Q&A] ROM] [5.0.2] Project D.I.S.C.O. - 1.0 - Mako [2015/01/13] [OFFICIAL]

Q&A for ROM] [5.0.2] Project D.I.S.C.O. - 1.0 - Mako [2015/01/13] [OFFICIAL]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ROM] [5.0.2] Project D.I.S.C.O. - 1.0 - Mako [2015/01/13] [OFFICIAL]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can you please add quick launch shortcut(the ring thing when holding home button). I lock my phone use it . Thank you !
I have it on my to-do list
Running 5.1 pre2 and so far everything has been great. I noticed in the features section (for 5.0.2) an advanced power menu is mentioned. Is that in the pre2 build?
Sorry, didn't make on that build but I hope on next.
new but not new nexus 4
Picked up a nexus 4 on the cheaps. Issue is device is stuck on cwm. Apparently previous owner deleted is files and now won't boot into anything other than recovery. I have stock os file and two ROMs I was thinking of trying. My problem is I can't communicate with device (no drivers) I downloaded the universal drivers and I also downloaded both google and nexus drivers that I got from other posts on here. I still can't see my device on my computer. Any help???
Your post isn't related to the topic/thread
Great work on the ROM. Guess 5.1/Test-4 does not include battery percentage at status bar and some other things mentioned in the feature list yet? Which radio/bootloader versions should I be running with 1.1? All I'm getting with is bootloop.
Uksav said:
Great work on the ROM. Guess 5.1/Test-4 does not include battery percentage at status bar and some other things mentioned in the feature list yet? Which radio/bootloader versions should I be running with 1.1? All I'm getting with is bootloop.
Click to expand...
Click to collapse
yes, no battery percentage right now, maybe I leave it out.
how, what did you flash to get bootloops? from 1.0 I wouldn't dirty flash. but from pre2 to pre4 i did clean and dirty flash and have no issues.
I did clean flash, couldn't get it to boot no matter what I wiped. Need to run 5.0.x droid until Xposed is updated, can't live without that.
Take another rom if you wanna use xposed, thank you
Hey Cem0,
Would it be possible to add in the volume rocker long press to change music tracks while the screen is off? It's one feature that I used all the time on some other roms. Very handy for changing tracks while driving, exercising, doing dishes etc.. If not, no biggy. I can live without it. Great work so far
Hi, Can i flash Semaphore_N4_3.0.5 on this rom? I'm on disco_mako-pre4.
Great Rom!! Perfect for me. Thanks.
I had the 3.0.4 version running on that, I guess .5 won't be a problem, maybe I'll add my build of sema with kexec patch again on the ROM, but later
Very good ROM, thanks!
thanks, good ROM))

[Q&A] [ROM][OFFICIAL][5.0.2_r1] BlissPop by Team Bliss-Manta-02/16

Q&A for [ROM][OFFICIAL][5.0.2_r1] BlissPop by Team Bliss-Manta-02/16
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][5.0.2_r1] BlissPop by Team Bliss-Manta-02/16. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thank you. Love it!
@ynotwall: please edit your post and remove the quote of the full OP!
Oops Sorry!
Hey I flashed this Rom and and I dunno if its just my tablet or Android 5.0 but for some reason...My GoPro (3+ Black) will not connect to my N10. I have researched it all I cant find out why it wont connect. Im to the point where I feel as if its Android 5.0. I'm runny 4.4.4 on my Note 3 and it works fine...It also works on my G. Nexus runny 4.4.2 and it also works on my iPod...but it will not connect to my N10. Does any the slightest idea as to why? Does anyone on here even own a GoPro and has run into this problem? This issue has happen on this rom and on Team UB rom...so I'm thinking its not the rom but the OS thats not working well. Any help would be appreciated.
Sent from my Note 3 using XDA Free mobile ap
4g
4G
Hi, i am from Belgium, when i enable 4G it connects, and it works fine, but there some kind of bug.
With 3g, i can get speeds over 700 kb/s, but with 4G, i only get speeds of 20kb/s.
Is this bug known, or is there a solution for it?
can't flash the 2.3 version
I'm using the 2.2 version right now, and i'm almost happy with it. The only thing, i want to add - to activate the battery fast charge. Is it possible?
And the second issue: i have the last CWM installed. And i can't install the 2.3 verison of BlissPop. At the stage of "wiping caches" the tablet reboots, and get stuck in an endless boot process. Can you help me?
0xbadc0de said:
I'm using the 2.2 version right now, and i'm almost happy with it. The only thing, i want to add - to activate the battery fast charge. Is it possible?
And the second issue: i have the last CWM installed. And i can't install the 2.3 verison of BlissPop. At the stage of "wiping caches" the tablet reboots, and get stuck in an endless boot process. Can you help me?
Click to expand...
Click to collapse
At the end i was able to flash the 2.3 version after changing to the latest TWRP. :laugh:

[Q&A] [ROM][5.0.2][OFFICIAL]Team UB ROM for trltexx [25/03/2015]

Q&A for [ROM][5.0.2][OFFICIAL]Team UB ROM for trltexx [25/03/2015]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][OFFICIAL]Team UB ROM for trltexx [25/03/2015]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Viper4android
Rom is looking great and is super smooth!
But i'm having issues with making viper4android work..
I think it's on conflict with audiofx
Any ideas??
NICE...
It's the best for me in this moment...
Thank You...
Mic problem
Hello, my question is about the problem with the microphones in the official version of CM12. The camera records at a very low sound, plus applications such as SHAZAM not recognize songs by this problem.
Any solution?
Thanks for this great ROM!
ROM is working pretty well. But since I flashed it I have trouble with wifi. Some time after connecting to any wifi network an exclamation mark will pop up next to the wifi symbol and all connections and downloads from then on will go over mobile internet. Reconnecting only rarely fixes this problem and the update to CM 12.1 didn't help.
Is this a common issue?
nohom85 said:
Rom is looking great and is super smooth!
But i'm having issues with making viper4android work..
I think it's on conflict with audiofx
Any ideas??
Click to expand...
Click to collapse
Same here. Under version 12.0 I could get Viper to work by installing SELinuxModeChanger and setting the SELinux mode to "permissive". But it doesn't seem to work anymore under CM12.1 ...
Thanks for this very nice Rom.
Everything is working fine (camera, BT etc.)
The only thing is the extremly Battery drain on my Device - yes I have wiped all and make also a factory reset before flashing.
Is there any hint/tip for a improvement?
thx Mike
I can save my photos that i take with the camera on sd card?
ROM Status
Add rom status, "Stable, Nightly, Beta, Alpha.. etc"
why n910c dont have such roms
All versions after 20150505 Team UB Rom for Note 4 (trltexx) not work! Bootloop!
TeamUB Rom Closed! ?

Categories

Resources