Hello!
I have a pretty unique internet setup....I connect to a cable company's public wifi with a small windows 7 computer, enable internet sharing to the ethernet, which is connected to a portable router and I connect all the devices to that router. Things were working well, but being a crappy old windows box, it randomly restarts, has driver problems, etc.
I was thinking of replacing the windows computer with one of those android media boxes...like this one..http://www.amazon.com/DIAOTEC-hardware-decoding-Bluetooth-Dual-band/dp/B00OLC80CS/ref=sr_1_38?ie=UTF8&qid=1416761939&sr=8-38&keywords=android+media+box
Because it uses less energy, is smaller, quieter, probably more stable, etc.
I was wondering if I would be able to have the same setup....Connect the Android box to wifi, then share that wifi's internet through Ethernet with other devices?
I've tried using repeaters, routers, access points, etc, but it looks like I can only connect to the cable public wifi and get internet from it if I use something like a computer or smartphone, in case you're wondering why I'm not just buying a repeater/access point.
DroidsBeforeBoids said:
Hello!
I have a pretty unique internet setup....I connect to a cable company's public wifi with a small windows 7 computer, enable internet sharing to the ethernet, which is connected to a portable router and I connect all the devices to that router. Things were working well, but being a crappy old windows box, it randomly restarts, has driver problems, etc.
I was thinking of replacing the windows computer with one of those android media boxes...like this one..http://www.amazon.com/DIAOTEC-hardw...1416761939&sr=8-38&keywords=android+media+box
Because it uses less energy, is smaller, quieter, probably more stable, etc.
I was wondering if I would be able to have the same setup....Connect the Android box to wifi, then share that wifi's internet through Ethernet with other devices?
I've tried using repeaters, routers, access points, etc, but it looks like I can only connect to the cable public wifi and get internet from it if I use something like a computer or smartphone, in case you're wondering why I'm not just buying a repeater/access point.
Click to expand...
Click to collapse
Should be doable on a rooted device with ethernet capabilities. Sounds like a few iptables rules, a bridge, and maybe a route or 2 to add.
Sent from my SM-G900P using XDA Free mobile app
Related
Hi All, i'm not sure if this has been mentioned on this forum or if it is even possible, but is it possible to use the wizard's wifi capability's on the pc as a wifi network adapter? I would love it if I could connect my wizard, via usb, to my pc, and use it as a wifi adapter to connect to my router? Thanks!
Possible solution...
I think you can. If you have activesync installed, you can connect your ppc to your laptop/desktop and specify that you can use the desktop's internet connection ("This computer is connected to: Automatic/Work Network/The Internet"). If your laptop has a wifi connection to your router, then you're all set!
Hope this helps!
Quakie
The thing is that I would like to use the wizard as my wifi connection for my laptop. My laptop does not have built in wireless, so instead of buying a wireless card for my laptop, I would like to use the wizard's built in wifi as a replacement, sorta like a wifi card for my laptop.
in theory it sounds like a good idea, and might even work-- i would like to know how to do this just in case i ever need it.
but in your case, you might want to look at mpci/cardbus wifi adapters, get a good mpci card if your laptop supports it.
i have a intel centrino branded card that came with my dell 600m, i noticed a couple pulls on ebay just like it last week for about $25?
and on the upper hand, if you ever need to break into some locked networks, backtrax2 supports that card fully.
Hi,
I was wondering if it is possible to make a wireless router of your phone using your computer internet connection.
This is because I am using a notebook at school, but there no is wireless router in the class room. There are a few PC's, wich have an internet connection, but I am not able to plug the lan cable into my notebook, so I can't use my notebook ath the moment, wich means I bought it for nonsense
So if anyone cares to help me out, you would make me happy
read all about it
http://wiki.xda-developers.com/inde...-up, Wi-Fi, using as modems, peer-to-peer etc.
I am interested in taking the internet connection from a desktop computer through USB on my phone and then using the phones wireless to share the connection to my laptop.
At my work the only way to connect to the network is if they allow your specific computer onto the network. I have been getting around this by using a mac that is on the network and setting up an ad-hoc network. This had worked well but they are replacing the mac with a brand new Dell tomorrow! Ah!
Any ideas on how I can share that network? None of the windows machines in our office have a wireless card and due to whatever security I can't just plug in.
Please note I am not trying to tether.
Thank you for any help!
Sent from my HTC Glacier using XDA App
Well, I couldn't think of a way with the phone. But I did come up with this. http://www.staples.com/Netgear-WNCE2001-Ethernet-to-Wireless-Adapter/product_865869?cmArea=SEARCH
Connect your computer to a switch, connect this to said switch. Then switch to lan port. Then set up ad-hoc using this? Little pricy but meh?
there are many ways to do this, you could use CM7 for one, it has wifi tethering built in.
there is PDAnet that tethers through usb and wifi (i think)
also go to the threads for your phone and look around to see how other users have accomplished it themselves.
So where do we stand? Has ANYONE successfully connected their touch to an iPad for BT PAN?
Me:
Touch cdma. Bell, NFSFAN 6.1, iPad2 32gb no 3G
Try to connect, BT pairs, but iPad and phone both say Not connected and won't connect.
I'm in the same boat with my Blackberry Playbook!
Ta-mater said:
So where do we stand? Has ANYONE successfully connected their touch to an iPad for BT PAN?
Me:
Touch cdma. Bell, NFSFAN 6.1, iPad2 32gb no 3G
Try to connect, BT pairs, but iPad and phone both say Not connected and won't connect.
Click to expand...
Click to collapse
Hi sorry for reposting this but here's my connection:
My entire house has internet wifi connection from a bridged router connected via ethernet to a XP computer that has a windows network connection bridge between my Vogue's NDIS USB and computer's network card.
Always had dropped connections every couple of minutes with vista and windows 7 tethering directly. Found NDIS drivers for XP, made an internet bridge and connection now lasts at least a few days to a week!
This comes in handy since my location can only connect to internet via dialup or satellite.
Not the fastest, but 1.5mbs is far better than dialup, and we have 2 laptops, iphone, ereader, bluray player (netflix), X10 devices, and android phone all connected to it with wifi. Really wish we had DSL or cable here, but the companies don't want to bother supplying it to our neighborhood.
So basically my desktop becomes a basic internet and 4TB storage server for all the other devices in our home.
So I can use my standard USB cable and tether to the laptop and have net connection on lappy. Same with desktop. USB tether works just the same as wifi tether. What about getting a micro USB to RJ45 (ethernet) cable and tethering to the internet in jack on my router. Would that put the net signal on the router like a modem would?
Chopstix9 said:
So I can use my standard USB cable and tether to the laptop and have net connection on lappy. Same with desktop. USB tether works just the same as wifi tether. What about getting a micro USB to RJ45 (ethernet) cable and tethering to the internet in jack on my router. Would that put the net signal on the router like a modem would?
Click to expand...
Click to collapse
Or you could get a wireless adapter for your Desktop. That's what I did. Now I can stream Amazon Prime on my Xbox 360, and PC game at the same time.This is what I have and works like a charm.
Good luck.
Oh my desktop is already wireless enabled, that's not an issue... Been running the house off the phones for a couple years... Just gave up a little bit when I got rid of cable interet. Whole house networking to other computers in the house, had to plug the wireless printer back into the desktop, it's no longer a network printer, etc.... was just toying with the idea and wondering if it would work is all.
Actually, in looking at the micro usb - rj45 adapters, I don't think it will work. Those are actually ethernet adapters, like adding a network card to a slot on a pc. Made for taking a net signal FROM a network, not sending one TO it.
Correct me if I'm wrong, but can't you just get a compatible wireless dongle (Something you would use for sniffing/injecting packets) and use it as an access point so you can broadcast the signal throughout the house?
Another thing you can do is pick up a router that you can install Tomato or DD-WRT on and use it as a wireless client bridge. It would connect to your phone, and again, broadcast that signal through the house.
Chopstix9 said:
So I can use my standard USB cable and tether to the laptop and have net connection on lappy. Same with desktop. USB tether works just the same as wifi tether. What about getting a micro USB to RJ45 (ethernet) cable and tethering to the internet in jack on my router. Would that put the net signal on the router like a modem would?
Click to expand...
Click to collapse
DJNads said:
Another thing you can do is pick up a router that you can install Tomato or DD-WRT on and use it as a wireless client bridge. It would connect to your phone, and again, broadcast that signal through the house.
Click to expand...
Click to collapse
Correct. Assuming the phone would even operate in this manner (I've never tried but sounds like a great idea!), you'd need a router that is capable of operating in bridged mode/wireless bridge/access point mode (may be labeled as either of them). You'd then have to configure the router to said bridged mode. An easier route (and possibly more expensive) would be to purchase just an access point.
MrHyde03 said:
Correct. Assuming the phone would even operate in this manner (I've never tried but sounds like a great idea!), you'd need a router that is capable of operating in bridged mode/wireless bridge/access point mode (may be labeled as either of them). You'd then have to configure the router to said bridged mode. An easier route (and possibly more expensive) would be to purchase just an access point.
Click to expand...
Click to collapse
I may have an old WAP in my junk closet. A router that can bridge may work but first thing I think I would need is a router or WAP that has a USB connection on it.... I'm looking to plug the phone into the router to provide the internet signal instead of a cable/dsl modem, creating a typical LAN ... I can still use the LAN in-house sans the net connection. Just a pain to disconnect from one network (phone hotspot) and connect to another (netless LAN) for file transfers network printing etc ...
Chopstix9 said:
I may have an old WAP in my junk closet. A router that can bridge may work but first thing I think I would need is a router or WAP that has a USB connection on it.... I'm looking to plug the phone into the router to provide the internet signal instead of a cable/dsl modem, creating a typical LAN ... I can still use the LAN in-house sans the net connection. Just a pain to disconnect from one network (phone hotspot) and connect to another (netless LAN) for file transfers network printing etc ...
Click to expand...
Click to collapse
You shouldn't need to physically connect your phone to the router at all. Depending on what router you get, it should be able to pick up the wireless signal from your phone's hotspot and rebroadcast it as its own network.
Edit: And honestly, I'm not sure connecting the phone via usb to the router would even share the connection. That router doesn't have the drivers needed for that to work.
To the OP, off topic question but what did you have to do to activate wi fi tether? your sig, tells me that your on stock and can still do it, yes? thanks!
Side note, it's been awhile but when I moved into my apartment I had no internet for a few days.
I did the USB wired tether to a laptop, then the laptop I think I enabled ICS/internet connection sharing and then connected with rj45 to a router, and it shared that as the WAN connection.
motrinHD said:
To the OP, off topic question but what did you have to do to activate wi fi tether? your sig, tells me that your on stock and can still do it, yes? thanks!
Click to expand...
Click to collapse
What part of my sig tells you I am on stock?
I've done both these things. I've taken my cell and flashed a router with dd-wrt and set it up as a repeater bridge but that means that only the computers near that router gets internet, unless your house is wired for ethernet (or using wireless). My current setup is having the phone tethered to a computer running Zentyal linux. This is a cool distro that can replace a 2008 Small business server in a work environment but it does the trick for my router at home. I had it running on an old P4 and recently graduated to a Zotac Zbox Mini ID41 which is tucked away behind my TV. I set up the computer to hand out dhcp and be the router and gateway. When i plug in my cell in tethering mode, zentyal recognizes it and i set that USB device as external WAN. It usually takes some getting used to and about a minute to normalize after the phone is unplugged and taken on the road. This has worked for me so far but when i'm at work, no internet at home. I'm currently attempting to talk my workplace into letting me subsidize a Verizon Jetpack i can leave home which will do the same job.
As a side note, i live in rural WI and we only have Satellite internet as a choice, which really stinks as both carriers have a bandwidth cap which we were constantly hitting two weeks into the billing cycle. They then throttle you down to less than a meg until your billing cycle renews.
We RV all summer most years and I use WiFiRanger gear to network our 5th wheel. That way we can grab a WiFi AP if one is available and the credentials are known or I HotSpot my phone and the Router grabs the phone's WiFi AP and we are good to go.
If you are stationary and only intend to use the phone's HotSpot as a WiFi AP then WiFiRanger's GO2 should do the trick. They are currently working on a firmware upgrade that will allow some great bandwidth monitoring and device usage controls. Their price is comparable to most full featured routers being offered but not cheap.
I am a satisfied user and Beta tester of their equipment, not an employee or representative. We use several of their offerings to maximize our capabilities on the road.