Database Users

CDMA WS / QPST Not Detecting Phone

I have read a few threads where people claimed to have made a connection with Sony Ericsson Xperia Play via CDMA Workshop and QPST. I have visited the official site from Sony and downloaded the drivers. Still no luck picking up the device on QPST or CDMA. I have installed Gordan's Gate's drivers and still no luck. Can someone point me in the right direction to getting the play detected? I have the R800X version already unlocked and rooted...
Note: I can successfully flash my device to CM7, and the other custom stuff. Thank so much to Ash, Mills, Doom and everyone else with so much helpful information....

solitaire4eva said:
I have read a few threads where people claimed to have made a connection with Sony Ericsson Xperia Play via CDMA Workshop and QPST. I have visited the official site from Sony and downloaded the drivers. Still no luck picking up the device on QPST or CDMA. I have installed Gordan's Gate's drivers and still no luck. Can someone point me in the right direction to getting the play detected? I have the R800X version already unlocked and rooted...
Note: I can successfully flash my device to CM7, and the other custom stuff. Thank so much to Ash, Mills, Doom and everyone else with so much helpful information....
Click to expand...
Click to collapse
simple buddy all you gotta do is open your phone dialer like if your gonna make a call and hit ##3424 and ht call itll take u back to your home screen its normal if it does attempt a call u did it wrong
after that if your using win 7 itll auto download the drivers this is to make a DIAG port if using diff os not sure look for the drivers on google
after that go into your device manager on your computer and look for what port number it gave you and go back to cdma and connect read and write spc is 000000 no extra steps are needed for the spc code
ps try to do it running stock rom because some users remove DIAG on customs roms why alot of people have trouble

Oh no! I have to install windows 7 because I am currently on windows XP (don't tell nobody!). I have been to the sony site and downloaded the PC companion and all 4 driver sets hoping it would be enough to get QPST to recognize my device. Still nothing, I can however connect with fastboot, flashtool, adb, but no luck with QPST detecting the phone no matter what I do.
If anyone out there have XP drivers for QPST that will detect the Xperia Play please share!

solitaire4eva said:
Oh no! I have to install windows 7 because I am currently on windows XP (don't tell nobody!). I have been to the sony site and downloaded the PC companion and all 4 driver sets hoping it would be enough to get QPST to recognize my device. Still nothing, I can however connect with fastboot, flashtool, adb, but no luck with QPST detecting the phone no matter what I do.
If anyone out there have XP drivers for QPST that will detect the Xperia Play please share!
Click to expand...
Click to collapse
try these out make sure you got usb debugging on and hit ##3424 and hit the call button itll take you back to the home screen and when it tells you to locate drivers unzip my rar file and put them like on the desktop or something and try it out
qpst has nothing to do with it for the most prt you need drivers for the DIAG diagnostics mode only then will qpst will detect the phone

edokassiah said:
try these out make sure you got usb debugging on and hit ##3424 and hit the call button itll take you back to the home screen and when it tells you to locate drivers unzip my rar file and put them like on the desktop or something and try it out
qpst has nothing to do with it for the most prt you need drivers for the DIAG diagnostics mode only then will qpst will detect the phone
Click to expand...
Click to collapse
Your drivers are missing .inf file and ##3424 isn't working for SE phones.
http://forum.xda-developers.com/showthread.php?t=1060184
hydrosity said:
Simply go to (via adb shell/terminal emulator) /sys/devices/virtual/usb_composite/diag and run (1 for on and 0 for off, respectively)
Code:
echo 1 > enable
echo 0 > enable
Click to expand...
Click to collapse

LIKE I SAID GRAB THE DRIVERS AND HIT ##3424
if it connects perfect to cdma workshop so will qpst
want more proof?

Okay it looks as if you both are right lol. I just realize my laptop don't have a Com Port and that may make a difference. I will install the drivers and ADB on my desktop tomorrow. Since I am running CM7 I will use the shell command to get to the enable file.
Thanks for the pictures! I noticed that I had the same stuff you had Edo except the Com port device. Oh and in stock I was able to do the 3424 code, but in CM7 it made a phone call lol.
Thanks Blag when I did the echo enable command on my laptop it booted me out of adb but I didn't have a com port lol.
Thank you guys for so much help!

edokassiah said:
LIKE I SAID GRAB THE DRIVERS AND HIT ##3424
if it connects perfect to cdma workshop so will qpst
want more proof?
Click to expand...
Click to collapse
I have GSM version, R800i.
First, ##3424 and call button initiates call.
Second, your drivers don't have inf file.

Blagus said:
I have GSM version, R800i.
First, ##3424 and call button initiates call.
Second, your drivers don't have inf file.
Click to expand...
Click to collapse
aha i have the cdma version not gsm which i think he does to since hes trying to connect to cdma and qpst to flashing purposes right?
okay yes i might of not packaged the zip right with the complete drivers but google is your friend as i dont have win xp i have win 7
and flashing custom roms theres a good chance they took out the diag mode for whatever reason why i suggested him to do it on a stock rom
when i hit ##3424 i dont get the phone call i get kicked back into the home screen and the computer initiates the diag port
there ya go
http://youtu.be/XyeROYQ5ULM

edokassiah said:
aha i have the cdma version not gsm which i think he does to since hes trying to connect to cdma and qpst to flashing purposes right?
okay yes i might of not packaged the zip right with the complete drivers but google is your friend as i dont have win xp i have win 7
and flashing custom roms theres a good chance they took out the diag mode for whatever reason why i suggested him to do it on a stock rom
when i hit ##3424 i dont get the phone call i get kicked back into the home screen and the computer initiates the diag port
there ya go
http://youtu.be/XyeROYQ5ULM
Click to expand...
Click to collapse
I have Win 7 too - do you have full driver package for Windows 7 or was it recognized automatically for you?
I activate diag mode via ADB shell and I get new HSUSB device but I need drivers for it.

Blagus said:
I have Win 7 too - do you have full driver package for Windows 7 or was it recognized automatically for you?
I activate diag mode via ADB shell and I get new HSUSB device but I need drivers for it.
Click to expand...
Click to collapse
try these try xperia driver if that doesnt work try xperia drivers 2

edokassiah said:
try these try xperia driver if that doesnt work try xperia drivers 2
Click to expand...
Click to collapse
You know, guess I'll have to quit it.
My phone's USB PID is E15D and it's not listed anywhere in inf files and I can't even start instalation via device manager. When I manually edit PID in inf to E15D, instalation fails with message install class is not present or valid.
EDIT: OK, after more editing I successfully installed it, but QPST still can't detect it (it's GSM R800i).
EDIT 2: Got it working in the end thanks for your drivers

huh those werent pulled from my computer they were downloaded from website thats how i was able to install the drivers there not attached to my phone in any way
uninstall what u got and retry

edokassiah said:
huh those werent pulled from my computer they were downloaded from website thats how i was able to install the drivers there not attached to my phone in any way
uninstall what u got and retry
Click to expand...
Click to collapse
Got it working in the end

I am the only unlucky person in the world! I think it is because I am still on windows XP. I will no longer put off installing Windows 7. Them drivers are not working for me at all. I just get the sony ericsson device with adb drivers showing up in my device manager. The other devices there are SEC HUSUB and they always have that problem symbol, the one with the yellow question mark. I try to install the drivers from their location and I get the message they don't have any information pertaining to the hardware.
Thanks though!

you have to manually edit inf files.
solitaire4eva said:
I am the only unlucky person in the world! I think it is because I am still on windows XP. I will no longer put off installing Windows 7. Them drivers are not working for me at all. I just get the sony ericsson device with adb drivers showing up in my device manager. The other devices there are SEC HUSUB and they always have that problem symbol, the one with the yellow question mark. I try to install the drivers from their location and I get the message they don't have any information pertaining to the hardware.
Thanks though!
Click to expand...
Click to collapse
Send frm my Play with coustum kernals

Virgin mobile intercept and cdma workshop

When you connect a VM intercept into PC how do get it into modem mode? What ## code do I use? Ex: moment = ##8778# and the epic is ##8778# I've tried it but it did not work... I'm looking to back up my NV items and I have cdma workshop 3.7 any help would be greatly appreciated thanks in advance
Sent from my Nexus S 4G using XDA Premium App

Curious about this as well. On the Epic you do this to get it into modem mode and then you can read it.
This intercept the best I can do is get it with the drivers where I can just see it as a modem and not actually read the phone itself.

Hey guys..
I was having some trouble with this too.
Here is the solution:
1. (If you already have your MSL/SPC, skip this step)
You have to have your MSL/SPC 6 digit code. This is not easy to come by since you can't connect your Intercept as a modem to read it with Cdma Workshop or QPST. You could call VM and ask, but I doubt they'll give it to you.
However there is a workaround:
Download this APK:
http://www.mediafire.com/?jjjynwp2y65ephj
It's a little app called ConnectBot. Once installed, in the lower left hand corner, where it says SSH, change that to "Local".. Then put anything in the text box you want.
When the command prompt comes up, type the command "getprop ril.MSL" and hit enter.
This should give you your MSL/SPC 6 digit code!
2. Dial ##PORT#, enter your MSL/SPC, and make sure both options are set to "modem" and not "pda"
3. You are gonna need additional drivers to access the phone as a modem. On Windows 7, it tries to install, then prompts you to download "Samsung PC Studio 3"
DO NOT INSTALL The one it suggests! Instead install this one:
http://www.mediafire.com/?k7pxzu3uc03nepn
This program will install the drivers you need.
Any questions just ask,
Kev

bhbs203 said:
When you connect a VM intercept into PC how do get it into modem mode? What ## code do I use? Ex: moment = ##8778# and the epic is ##8778# I've tried it but it did not work... I'm looking to back up my NV items and I have cdma workshop 3.7 any help would be greatly appreciated thanks in advance
Sent from my Nexus S 4G using XDA Premium App
Click to expand...
Click to collapse
you will need to have you msl to get there...
##port# to change the port from modem to pda doesn't work with some hacked flashes
or ##7678# also ##data# to get to the dangerous data screen on sprint ##debug# still works too

[Tutorial] Unlock VZW Razr M/M HD (XT907/XT926) for U.S. Carriers *CDMA WS Method*

THIS WORKS WITH THE LATEST UPDATE!!!! THANK YOU dreamliner2012 FOR RUNNING IT THROUGH AND CLARIFYING!
THE ORIGINAL METHODS STILL WORK FOR ANYONE WHO WANTS TO USE RADIOCOMM AND DFS INSTEAD!
ALL CREDITS TO CELLZEALOT'S THREAD AND ARNOLD SNARB'S POST
GIVE THEM YOUR PROPER THANKS!!!
this was done with stock bootloader, rom, no root, official EVERYTHING
video tutorial HERE
heres the quick rundown -
1: get the Motorola QC Diagnostics driver to install. hard with Win7 x64, but be diligent it does work.
2: boot your XT907/XT926 into BP Tools mode (Vol Up and Down + Power, scroll down to BP Tools hit Vol Up)
3: connect to your computer *duh*
4: open CDMA WS 2.7 or higher (google)
5: connect to your COM Port and press CONNECT
6: click the SECURITY tab and enter 000000 as SPC and click SEND
7: click the MAIN tab and click READ *dunno if you need to but I did for safe measure*
8: click the MEMORY tab and select READ under NV ITEMS. dismiss the SPC prompt
9: First Item to read is 8322. Last Item to read is 8323. click SAVE and name the .txt file whatever you want, just remember where you put it
10: open the .txt file you just saved and under 8322 you will see 01 00 00 00 00 etc. change 01 to 00 and save the .txt file. DONT CHANGE 8323!!!
11: back in CDMA WS click WRITE under NV ITEMS. dismiss the SPC prompt again
12: find the .txt file you just edited and click OK
13: reboot the phone and put in your preferred Sim
14: in Settings go to More... under Wireless Networks and change your Network Mode to GSM/UMTS
15: SUCK IT VERIZON
happy days ahead for all!
don't forget that THANKS button :victory:
***DISCLAIMER***
NOT RESPONSIBLE FOR YOUR LACK OF ABILITY TO FOLLOW SIMPLE DIRECTIONS RESULTING IN A BRICKED DEVICE!
---from cellzealot on how to load Win7 x64 drivers---
cellzealot said:
Here is a screenshot of Device Manager on my PC on WIN7 64 bit with the latest 6.2 Motorola USB drivers and my XT907 connected in BP Tools mode with all of the interfaces highlighted.
There are 3 modems, 1 network device and 1 COM port that should be present and installed.
The 6.2 driver set has signed versions for these device interfaces so no force loading should be required and they should install automatically when the phone is connected in BP Tools mode with USB debugging enabled.
Make note of the port number assigned to the COM Port as that is the port you will use for CDMA WS or DFS or any other QC based NV access tool.
The QC Interface is the Motorola QC Diag Port.
Right click and choose Update Drivers then choose Do not load drivers automatically. Allow me to choose from a list of available devices.
Scroll down to Ports: COM/LPT and then Motorola and then Motorola QC Diag Port.
It will warn about unsigned drivers, just click Install anyway and it will load the driver and show up with a COM port number assigned.
Use that COM port for CDMA WS to edit the NV.
If you continue to have problems, I suggest reflashing the firmware or just the modem and fsg.mbn in fastboot, and starting over.
Click to expand...
Click to collapse

Thanks for some clarification on a confusing subject. Might want to move it to the General section or get it stickied.
Sent from my XT907 using xda premium

Leraeniesh said:
Thanks for some clarification on a confusing subject. Might want to move it to the General section or get it stickied.
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
how would i go about making a request for such thing or would i have to do it myself?

dragonhart6505 said:
how would i go about making a request for such thing or would i have to do it myself?
Click to expand...
Click to collapse
Just contact a moderator and I'm sure they'd be able to help.
Sent from my XT907 using xda premium

Leraeniesh said:
Just contact a moderator and I'm sure they'd be able to help.
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
gratzi ^_^

6: click the SECURITY tab and enter 000000 as SPC and click SEND
I got to this step, however I did not get a popup and at the bottom of the CDMA Workshop window reads the following error:
"Failed.. Phone does not answer"
Any suggestions?

lallafa said:
6: click the SECURITY tab and enter 000000 as SPC and click SEND
I got to this step, however I did not get a popup and at the bottom of the CDMA Workshop window reads the following error:
"Failed.. Phone does not answer"
Any suggestions?
Click to expand...
Click to collapse
you have the proper drivers installed i am assuming? check your device manager. your looking for Motorola QC Diagnostics Port. find the COM Port your phone is connected to then select it in CDMA WS.

dragonhart6505 said:
you have the proper drivers installed i am assuming? check your device manager. your looking for Motorola QC Diagnostics Port. find the COM Port your phone is connected to then select it in CDMA WS.
Click to expand...
Click to collapse
Okay, I have followed all of the instructions, went along with the video, everything seemed to work okay... I haven't gotten the Network Error popup message yet... However, I still do not have service.. I'm hoping it's just because I'm in a rural area. I'm going to drive around a bit and see if it changes.
My network mode is still under Global for preferred, should I change this?

lallafa said:
Okay, I have followed all of the instructions, went along with the video, everything seemed to work okay... I haven't gotten the Network Error popup message yet... However, I still do not have service.. I'm hoping it's just because I'm in a rural area. I'm going to drive around a bit and see if it changes.
My network mode is still under Global for preferred, should I change this?
Click to expand...
Click to collapse
yes to GSM/UMTS. probably why your not getting service. shoulda mentioned that

dragonhart6505 said:
yes to GSM/UMTS. probably why your not getting service. shoulda mentioned that
Click to expand...
Click to collapse
Okay, I changed the settings, and have turned my phone off and back on, hopefully this works, fingers crossed

lallafa said:
Okay, I changed the settings, and have turned my phone off and back on, hopefully this works, fingers crossed
Click to expand...
Click to collapse
and the verdict?

dragonhart6505 said:
and the verdict?
Click to expand...
Click to collapse
Well, after driving for about 15 minutes, still with the "Emergency Calls Only" symbol, I was about to turn around and give up...
and I got one bar, then two bars... then full service!! Everything works great, I am now running (what once was) a Verizon-locked Motorola Razr XT907 with the JellyBean 4.1.2 update, on Straight Talk's monthly service (with an activated Straight Talk card).
I kind of want to have your babies, but I hope a thanks and a subscription to your YouTube will do Thanks again SO much!

dragonhart6505 said:
ALL CREDITS TO CELLZEALOT'S THREAD AND ARNOLD SNARB'S POST
GIVE THEM YOUR PROPER THANKS!!!
video tutorial HERE
heres the quick rundown -
1: get the Motorola QC Diagnostics driver to install. hard with Win7 x64, but be diligent it does work.
2: boot your XT907/XT926 into BP Tools mode (Vol Up and Down + Power, scroll down to BP Tools hit Vol Up)
3: connect to your computer *duh*
4: open CDMA WS 2.7 or higher (google)
5: connect to your COM Port and press CONNECT
6: click the SECURITY tab and enter 000000 as SPC and click SEND
7: click the MAIN tab and click READ *dunno if you need to but I did for safe measure*
8: click the MEMORY tab and select READ under NV ITEMS. dismiss the SPC prompt
9: First Item to read is 8322. Last Item to read is 8323. click SAVE and name the .txt file whatever you want, just remember where you put it
10: open the .txt file you just saved and under 8322 you will see 01 00 00 00 00 etc. change 01 to 00 and save the .txt file. DONT CHANGE 8323!!!
11: back in CDMA WS click WRITE under NV ITEMS. dismiss the SPC prompt again
12: find the .txt file you just edited and click OK
13: reboot the phone and put in your preferred Sim
14: in Settings go to More... under Wireless Networks and change your Network Mode to GSM/UMTS
15: SUCK IT VERIZON
happy days ahead for all!
***DISCLAIMER***
NOT RESPONSIBLE FOR YOUR LACK OF ABILITY TO FOLLOW SIMPLE DIRECTIONS RESULTING IN A BRICKED DEVICE!
Click to expand...
Click to collapse
please set up how to instal the drivers manually

gagnier27 said:
please set up how to instal the drivers manually
Click to expand...
Click to collapse
Here is a screenshot of Device Manager on my PC on WIN7 64 bit with the latest 6.2 Motorola USB drivers and my XT907 connected in BP Tools mode with all of the interfaces highlighted.
There are 3 modems, 1 network device and 1 COM port that should be present and installed.
The 6.2 driver set has signed versions for these device interfaces so no force loading should be required and they should install automatically when the phone is connected in BP Tools mode with USB debugging enabled.
Make note of the port number assigned to the COM Port as that is the port you will use for CDMA WS or DFS or any other QC based NV access tool.

cellzealot said:
Here is a screenshot of Device Manager on my PC on WIN7 64 bit with the latest 6.2 Motorola USB drivers and my XT907 connected in BP Tools mode with all of the interfaces highlighted.
There are 3 modems, 1 network device and 1 COM port that should be present and installed.
The 6.2 driver set has signed versions for these device interfaces so no force loading should be required and they should install automatically when the phone is connected in BP Tools mode with USB debugging enabled.
Make note of the port number assigned to the COM Port as that is the port you will use for CDMA WS or DFS or any other QC based NV access tool.
Click to expand...
Click to collapse
In my particular case, the drivers does not loading here is a picture, how can i do that manually?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

gagnier27 said:
In my particular case, the drivers does not loading here is a picture, how can i do that manually?
Click to expand...
Click to collapse
The QC Interface is the Motorola QC Diag Port.
Right click and choose Update Drivers then choose Do not load drivers automatically. Allow me to choose from a list of available devices.
Scroll down to Ports: COM/LPT and then Motorola and then Motorola QC Diag Port.
It will warn about unsigned drivers, just click Install anyway and it will load the driver and show up with a COM port number assigned.
Use that COM port for CDMA WS to edit the NV.
If you continue to have problems, I suggest reflashing the firmware or just the modem and fsg.mbn in fastboot, and starting over.

cellzealot said:
The QC Interface is the Motorola QC Diag Port.
Right click and choose Update Drivers then choose Do not load drivers automatically. Allow me to choose from a list of available devices.
Scroll down to Ports: COM/LPT and then Motorola and then Motorola QC Diag Port.
It will warn about unsigned drivers, just click Install anyway and it will load the driver and show up with a COM port number assigned.
Use that COM port for CDMA WS to edit the NV.
If you continue to have problems, I suggest reflashing the firmware or just the modem and fsg.mbn in fastboot, and starting over.
Click to expand...
Click to collapse
Thanks for this cellzealot! I'll quote this in the OP so it'll be easier to find soon as I get to my office in the morning

lallafa said:
Well, after driving for about 15 minutes, still with the "Emergency Calls Only" symbol, I was about to turn around and give up...
and I got one bar, then two bars... then full service!! Everything works great, I am now running (what once was) a Verizon-locked Motorola Razr XT907 with the JellyBean 4.1.2 update, on Straight Talk's monthly service (with an activated Straight Talk card).
I kind of want to have your babies, but I hope a thanks and a subscription to your YouTube will do Thanks again SO much!
Click to expand...
Click to collapse
Will do just nicely and your quite welcome!

dragonhart6505 said:
Will do just nicely and your quite welcome!
Click to expand...
Click to collapse
done!!!!
thanks to you and cellzealot..

gagnier27 said:
done!!!!
thanks to you and cellzealot..
Click to expand...
Click to collapse
Anytime

[Tutorial] Unlock VZW Razr M/M HD (XT907/XT926) for U.S. Carriers *CDMA WS METHOD*

THIS WORKS WITH THE LATEST UPDATE!!!! THANK YOU dreamliner2012 FOR RUNNING IT THROUGH AND CLARIFYING!
THE ORIGINAL METHODS STILL WORK FOR ANYONE WHO WANTS TO USE RADIOCOMM AND DFS INSTEAD!
ALL CREDITS TO CELLZEALOT'S THREAD AND ARNOLD SNARB'S POST
GIVE THEM YOUR PROPER THANKS!!!
this was done with stock bootloader, rom, no root, official EVERYTHING
video tutorial HERE
heres the quick rundown -
1: get the Motorola QC Diagnostics driver to install. hard with Win7 x64, but be diligent it does work.
2: boot your XT907/XT926 into BP Tools mode (Vol Up and Down + Power, scroll down to BP Tools hit Vol Up)
3: connect to your computer *duh*
4: open CDMA WS 2.7 or higher (google)
5: connect to your COM Port and press CONNECT
6: click the SECURITY tab and enter 000000 as SPC and click SEND
7: click the MAIN tab and click READ *dunno if you need to but I did for safe measure*
8: click the MEMORY tab and select READ under NV ITEMS. dismiss the SPC prompt
9: First Item to read is 8322. Last Item to read is 8323. click SAVE and name the .txt file whatever you want, just remember where you put it
10: open the .txt file you just saved and under 8322 you will see 01 00 00 00 00 etc. change 01 to 00 and save the .txt file. DONT CHANGE 8323!!!
11: back in CDMA WS click WRITE under NV ITEMS. dismiss the SPC prompt again
12: find the .txt file you just edited and click OK
13: reboot the phone and put in your preferred Sim
14: in Settings go to More... under Wireless Networks and change your Network Mode to GSM/UMTS
15: SUCK IT VERIZON
happy days ahead for all!
don't forget that THANKS button :victory:
***DISCLAIMER***
NOT RESPONSIBLE FOR YOUR LACK OF ABILITY TO FOLLOW SIMPLE DIRECTIONS RESULTING IN A BRICKED DEVICE!
originally posted this in the Motorola Droid RAZR M Q&A section but as I had originally used an XT926 to make this tutorial I thought I had better put this here >_<
---from cellzealot on how to load Win7 x64 drivers---
cellzealot said:
Here is a screenshot of Device Manager on my PC on WIN7 64 bit with the latest 6.2 Motorola USB drivers and my XT907 connected in BP Tools mode with all of the interfaces highlighted.
There are 3 modems, 1 network device and 1 COM port that should be present and installed.
The 6.2 driver set has signed versions for these device interfaces so no force loading should be required and they should install automatically when the phone is connected in BP Tools mode with USB debugging enabled.
Make note of the port number assigned to the COM Port as that is the port you will use for CDMA WS or DFS or any other QC based NV access tool.
The QC Interface is the Motorola QC Diag Port.
Right click and choose Update Drivers then choose Do not load drivers automatically. Allow me to choose from a list of available devices.
Scroll down to Ports: COM/LPT and then Motorola and then Motorola QC Diag Port.
It will warn about unsigned drivers, just click Install anyway and it will load the driver and show up with a COM port number assigned.
Use that COM port for CDMA WS to edit the NV.
If you continue to have problems, I suggest reflashing the firmware or just the modem and fsg.mbn in fastboot, and starting over.
Click to expand...
Click to collapse

dragonhart6505 said:
ALL CREDITS TO CELLZEALOT'S THREAD AND ARNOLD SNARB'S POST
GIVE THEM YOUR PROPER THANKS!!!
this was done with stock bootloader, rom, no root, official EVERYTHING
video tutorial HERE
heres the quick rundown -
1: get the Motorola QC Diagnostics driver to install. hard with Win7 x64, but be diligent it does work.
2: boot your XT907/XT926 into BP Tools mode (Vol Up and Down + Power, scroll down to BP Tools hit Vol Up)
3: connect to your computer *duh*
4: open CDMA WS 2.7 or higher (google)
5: connect to your COM Port and press CONNECT
6: click the SECURITY tab and enter 000000 as SPC and click SEND
7: click the MAIN tab and click READ *dunno if you need to but I did for safe measure*
8: click the MEMORY tab and select READ under NV ITEMS. dismiss the SPC prompt
9: First Item to read is 8322. Last Item to read is 8323. click SAVE and name the .txt file whatever you want, just remember where you put it
10: open the .txt file you just saved and under 8322 you will see 01 00 00 00 00 etc. change 01 to 00 and save the .txt file. DONT CHANGE 8323!!!
11: back in CDMA WS click WRITE under NV ITEMS. dismiss the SPC prompt again
12: find the .txt file you just edited and click OK
13: reboot the phone and put in your preferred Sim
14: in Settings go to More... under Wireless Networks and change your Network Mode to GSM/UMTS
15: SUCK IT VERIZON
happy days ahead for all!
don't forget that THANKS button :victory:
***DISCLAIMER***
NOT RESPONSIBLE FOR YOUR LACK OF ABILITY TO FOLLOW SIMPLE DIRECTIONS RESULTING IN A BRICKED DEVICE!
originally posted this in the Motorola Droid RAZR M Q&A section but as I had originally used an XT926 to make this tutorial I thought I had better put this here >_<
I NEED CONFIRMATION FROM ANYONE WITH AN XT907 ON THE LATEST UPDATE TO CONFIRM WHETHER OR NOT THIS STILL WORKS!! PLEASE LET ME KNOW SO I CAN UPDATE THE OP ACCORDINGLY!
Click to expand...
Click to collapse
If you do this can you use the phone on Verizon still or do you need to revert the changes?
sent from my xt926 RAZR maxx hd

koftheworld said:
If you do this can you use the phone on Verizon still or do you need to revert the changes?
sent from my xt926 RAZR maxx hd
Click to expand...
Click to collapse
should be able to just take out the sim and change everything back in Mobile Network settings.

This is the same method that has been posted for a long time. The only difference is that the old method used RadioComm.

Cpudan80 said:
This is the same method that has been posted for a long time. The only difference is that the old method used RadioComm.
Click to expand...
Click to collapse
Edit: I have been informed that the RadioComm and DFS methods still work with the latest updates as well. I just thought I would post a different method for anyone who wanted an easier interface to work with.
if this isnt helpful to anyone, fine. then ill send a request to remove it. not gonna step on anyone elses tutorial-territory

dragonhart6505 said:
Edit: I have been informed that the RadioComm and DFS methods still work with the latest updates as well. I just thought I would post a different method for anyone who wanted an easier interface to work with.
if this isnt helpful to anyone, fine. then ill send a request to remove it. not gonna step on anyone elses tutorial-territory
Click to expand...
Click to collapse
Yeah this method is a bit easier, given RadioComm's daunting interface. What version of CDMA WS did you use? The website lists Free/Lite/Ultimate, but it's not clear if that's just determined by the key that you enter.

Cpudan80 said:
Yeah this method is a bit easier, given RadioComm's daunting interface. What version of CDMA WS did you use? The website lists Free/Lite/Ultimate, but it's not clear if that's just determined by the key that you enter.
Click to expand...
Click to collapse
cracked version of 2.7 works fine

Will this work with GSM networks outside of US on Android 4.3?

Sensivity said:
Will this work with GSM networks outside of US on Android 4.3?
Click to expand...
Click to collapse
Its already a World Phone, there's no need to do this for any carrier outside of U.S, but yes it will

dragonhart6505 said:
Its already a World Phone, there's no need to do this for any carrier outside of U.S, but yes it will
Click to expand...
Click to collapse
Yes, my GSM SIM worked fine on stock and based on stock roms, but when I tried CM 10.2 for xt926 (Android 4.3) it just couldn't find my mobile network. CM 10.2 for xt925 finds network but can't connect to them automaticly or manually, so I want to try this tutorial for CM10.2 for xt926.

Sensivity said:
Yes, my GSM SIM worked fine on stock and based on stock roms, but when I tried CM 10.2 for xt926 (Android 4.3) it just couldn't find my mobile network. CM 10.2 for xt925 finds network but can't connect to them automaticly or manually, so I want to try this tutorial for CM10.2 for xt926.
Click to expand...
Click to collapse
There's a patch for the gsm but people are reporting no luck so far with CM 10.2 4.3 based ROMs on the Razr M. This method does not help that but if you find out otherwise id like to know

My phone xt926 is working on PacMans ROM. I followed these instructions. Did a full wipe including system. Installed the PacMan Gsm ROM. Everything but UMTS works. Edge data works fine.
UMTS works fine with the stock ROM. I wonder if of is a seem edit or build prop issue to get it working on AOSP ROMs
Sent from my EPAD using xda app-developers app

Flash Me, maybe?
I now have HSPA+ working on my phone with PacMan.
In case anyone is interested in either thanking me for being brilliant or roast me for sucking at searching for pre existing solutions, I'll post my steps here.
1. Flash to stock using RSD Lite and the newest Verizon files from here http://sbf.droid-developers.org/vanquish/list.php
2. Follow the instructions from either this thread http://forum.xda-developers.com/showthread.php?t=2389740 or this one http://forum.xda-developers.com/showthread.php?t=2166542 I used the RadioComm method because screw drivers
3. Ensure the new gsm sim is registered and working on the network.
4. Download the your favorite ROM. I am using the PacMan 4.3
5. In recovery wipe everything including the system, cache and dalvik cache
6. Install Rom and wipe cache again
7. Boot, login, and download Viaero 4g toggle or press *#*#4636#*#* and change the phone to GSM/wcdma (prl).
8. Add this to your bulid.prop thanks to mattwheat at droidrzr.com. http://www.droidrzr.com/index.php/t...et-data-and-smsmms-working-on-xt926-422-roms/
Edit build props to reflect this :
ro.carrier= T-Mobile (or your carrier)
ro.telephony.default_network = 9
telephony.rilV7NeedCDMALTEPhone = false
8. ????????
9. Profit
I hope this helps.

can anyone confirm if this is working with the 9.18.94 on the HD??

Problems!!!
I am using Win7 32b and I already installed everything moto drivers, the CDMA and put my phone on BP mode, but for some reason the program does not detect the port, why? What can I do?

dlucas8384 said:
can anyone confirm if this is working with the 9.18.94 on the HD??
Click to expand...
Click to collapse
yes it does ^_^

Pizzoro said:
I am using Win7 32b and I already installed everything moto drivers, the CDMA and put my phone on BP mode, but for some reason the program does not detect the port, why? What can I do?
Click to expand...
Click to collapse
Try this

Try use unlock root pro

Picked up a Razr M the other day for $10, this method still works awesome. Thanx for the hard work.

vwmaniacx said:
Picked up a Razr M the other day for $10, this method still works awesome. Thanx for the hard work.
Click to expand...
Click to collapse
^_^
Sent from my N800 using XDA Premium 4 mobile app

Need my msl

I was wondering if anyone has been able to get their msl from sprint? I am trying to get msl ans having no luck.

Tsukiyohikage said:
I was wondering if anyone has been able to get their msl from sprint? I am trying to get msl ans having no luck.
Click to expand...
Click to collapse
I was able to get my msl by following the advice of @be free
See my similar thread here.
Sent from my Sprint HTC 10 using Tapatalk

Thanks. I tried it, but couldn't get it to work for me.

Tsukiyohikage said:
Thanks. I tried it, but couldn't get it to work for me.
Click to expand...
Click to collapse
Hi Tsukiyohikage, i got you covered, send me a PM and will help you with the MSL of your phone, i think i have an easy way to get it

Tsukiyohikage said:
I was wondering if anyone has been able to get their msl from sprint? I am trying to get msl ans having no luck.
Click to expand...
Click to collapse
Can you use attached - just use password oriax123 and choose scan. Then change method from NV to HTC. Finally click Read SPC - your MSL is the 6 digit code which is output.
Need to put phone in DIAG (##3424#) and then connect phone to PC. I used WIndows 10 x64, however, YMMV.

pinky059 said:
Can you use attached - just use password oriax123 and choose scan. Then change method from NV to HTC. Finally click Read SPC - your MSL is the 6 digit code which is output.
Need to put phone in DIAG (##3424#) and then connect phone to PC. I used WIndows 10 x64, however, YMMV.
Click to expand...
Click to collapse
Thanks that worked.

Tsukiyohikage said:
Thanks that worked.
Click to expand...
Click to collapse
i can confirm this works
http://forum.xda-developers.com/sprint-one-m9/general/nv-unlock-sim-t3314755
just download the basicflasher located at bottom of first post

Basic Flasher gives me a connection error.
Rooted Sprint HTC 10, still can't get MSL by any method - Basic Flasher, CDMAtoo, Terminal Emulator... any other advie?

dreadpiraterobert said:
Basic Flasher gives me a connection error.
Rooted Sprint HTC 10, still can't get MSL by any method - Basic Flasher, CDMAtoo, Terminal Emulator... any other advie?
Click to expand...
Click to collapse
After entering the DM Command Service (##3424#), did you activate "DM" mode? Because if you didn't, the Basic Flasher won't find your phone. After clicking "Scan", log should show "HTC Diagnostic Interface" and a (COM X). Click "Connect" and you should see "Device Connected." Change Method to "HTC" and click "Read SPC". MSL should show up next to "SPC:".
When I ran this program, it threw a Microsoft C++ Framework error. Just click "Continue" and program will still work.

cytherian said:
After entering the DM Command Service (##3424#), did you activate "DM" mode? Because if you didn't, the Basic Flasher won't find your phone. After clicking "Scan", log should show "HTC Diagnostic Interface" and a (COM X). Click "Connect" and you should see "Device Connected." Change Method to "HTC" and click "Read SPC". MSL should show up next to "SPC:".
When I ran this program, it threw a Microsoft C++ Framework error. Just click "Continue" and program will still work.
Click to expand...
Click to collapse
After getting the MSL directly from the Bootloader (Basic Flasher could not connect... and getting it from the bootloader took a looooong time) I'm now stuck with the NV tools. Same problem, can't connect to COM 3. (Or any other port.)

dreadpiraterobert said:
After getting the MSL directly from the Bootloader (Basic Flasher could not connect... and getting it from the bootloader took a looooong time) I'm now stuck with the NV tools. Same problem, can't connect to COM 3. (Or any other port.)
Click to expand...
Click to collapse
How'd you get your MSL directly from the Bootloader? I don't remember seeing it displayed in the bootloader screens. I couldn't get Basic Flasher to find my phone on any COM port until I activated DM Mode. If you did that and it still didn't see it, don't know what could be the problem. Are you able to run adb commands on your phone from CMD window without any issue?