Has anyone gotten this to work? When I type ADB devices, I get:
Code:
????????? no permissions
I rebooted into fastboot with no luck either. Except now ADB doesn't even pick up any devices. And yes, I enabled USB debug mode and unauthorized sources.
Thanks!
feered said:
Has anyone gotten this to work? When I type ADB devices, I get:
Code:
????????? no permissions
I rebooted into fastboot with no luck either. Except now ADB doesn't even pick up any devices. And yes, I enabled USB debug mode and unauthorized sources.
Thanks!
Click to expand...
Click to collapse
I'd guess you are using an older version of the toolkit. Try downloading the latest SDK and using it to see if that helps (it'll also update to the latest drivers). Good luck.
feered said:
Has anyone gotten this to work? When I type ADB devices, I get:
Code:
????????? no permissions
I rebooted into fastboot with no luck either. Except now ADB doesn't even pick up any devices. And yes, I enabled USB debug mode and unauthorized sources.
Thanks!
Click to expand...
Click to collapse
Which OS are you using (Windows, Mac, Linux)?
Elrondolio said:
I'd guess you are using an older version of the toolkit. Try downloading the latest SDK and using it to see if that helps (it'll also update to the latest drivers). Good luck.
Click to expand...
Click to collapse
It's the latest SDK.
bsara said:
Which OS are you using (Windows, Mac, Linux)?
Click to expand...
Click to collapse
Linux - Ubuntu to be more specific.
So I figured out the issue. I rebooted into the bootloader (unplug NP, plug it back in, immediately hold the button located on the bottom of the player until the light flashes), typed fastboot devices and it finally recognized the device. ADB still however did not recognize the device while in the bootloader until I powered it back on. Very strange... Not sure if the order I did things made a difference but I'm able to connect to the interface now.
Hope this helps someone. Cheers!
feered said:
Linux - Ubuntu to be more specific.
So I figured out the issue. I rebooted into the bootloader (unplug NP, plug it back in, immediately hold the button located on the bottom of the player until the light flashes), typed fastboot devices and it finally recognized the device. ADB still however did not recognize the device while in the bootloader until I powered it back on. Very strange... Not sure if the order I did things made a difference but I'm able to connect to the interface now.
Click to expand...
Click to collapse
I had the same issue on Ubuntu. You need to run ADB with sudo...why? I have no idea...but I found a post suggesting it on StackOverflow and it worked...so I'm not questioning it.
Before doing anything below, have you installed adb via apt-get? If so, remove it and just put a link to your SDK manager adb and fastboot in a folder included in your PATH or add the directory to the path, then start a new shell before proceeding. The adb and fastboot provided by apt-get are old.
Do the following:
Have your device plugged in and fully booted and with USB debugging enabled
run this command: "sudo adb kill-server && adb start-server"
You should be prompted on the device to authorize the access of your computer via adb
run "adb devices" to make sure that it all worked correctly
Related
I have troubles with developer mode on my phone.
Enable usb debug option is checked, but adb (running under gentoo linux, ubuntu, windows 7) doesn't show any devices.
But when recovery (CWM) is loaded, everything works well.
When I'm trying to start adbd with
Code:
#adbd start
I get message "cannot bind tcp:5037"
I thought it appears because adbd is already running but
Code:
ps aux | grep adb
gives nothing
Any ideas what to do? Does anyone have problems with adb even if Usb debug is turned on?
I use Debian and my command is adb start-server.
Give it a try.
Fr0zen1977 said:
I use Debian and my command is adb start-server.
Give it a try.
Click to expand...
Click to collapse
It doesn't help
Shtsh said:
...But when recovery (CWM) is loaded, everything works well...
Click to expand...
Click to collapse
Looks like ROM problem. Did you tried another one??
Yes. I'm tried several stock ROMs (2.3.6, 2.3.5), cranium, broodROM. Factory reset doesn't help.
Hi.
I have a nexus 7 2012 edition which turns on with The Google written logo and under the screen with a padlock. After that it will be in bootloop with a black screen ( I can see the backlight turning on/off). This is also if pressing the power+volume down combination. Seems bootloader is corrupted. Anyway I installed everything on pc plus I'm using the WugFresh Nexus Root Toolkit and here are some examples which show what errors I'm encountering when trying to flash stock firmware .
Log:
Checking ADB/FASTBOOT Connectivity
adb devices
015d4a5ed8500c01 unauthorized
fastboot devices
There is also a notification popup which tells me:
"An ADB Interface device was found but it was listed as "unauthorized"
-Accept the RSA security prompt and check "Always allow from this computer"
At this point I don't know what to do, can you help me?
Same issue - following
I have the same issue now after trying to flash a kernel to fix the slow charging issue. Following this post for any update.
Sunil_511 said:
I have the same issue now after trying to flash a kernel to fix the slow charging issue. Following this post for any update.
Click to expand...
Click to collapse
Hi, Sunil_511...
Bit speculative this, and I can't say for certain if the following solution would work, because I've never had this problem myself. It also requires that your Nexus 7 be in a fully bootable state.
Go to your Nexus 7 Developer Options in the devices settings and tap on 'Revoke USB debugging authorisations'. Tap on OK to confirm. See attached screenshot.
This, theoretically, should wipe the slate clean.
Reboot both your N7 and your PC/laptop and when you next reconnect your N7 to your PC/laptop, you'll be asked to authorise this new USB connection when you perform some action that requires it.
Well, that's the plan anyway.
Good luck?.
Rgrds,
Ged.
Nope, in my case my tab is not booting to recovery or system. The only option is adb and it is showing unauthorized. My last option what i think off is to change the motherboard.
Following
I have the same error and like to follow
Sunil_511 said:
I have the same error and like to follow
Click to expand...
Click to collapse
Google search is your friend. I found the following two methods which seems to have worked for some people.
1. If you are using OS X*:
Reboot your phone into recovery mode.
Connect it to your computer.
Open the terminal and type:
cd ~/.android
adb push adbkey.pub /data/misc/adb/adb_keys
All done! Just adb shell reboot and feel the power!
*For Windows 10, .android directory is located in your the base of your C:\User\user_name directory.
2. Go to where you have stored adb files, open that folder and press "CTRL+SHIFT+Right Click" and select and click on Open Command Prompt option
Now enter following command
adb start-server (Enter)
adb usb (Enter)
After that your device is no longer unauthorized and you should be able to use any command in your Android Mobile using PC/ Computer.
If these fixes don't work, SEARCH.
thanks buddy, i have tried pushing the adb keys but no luck. I will try tge second option. Will let you know after trying.
No difference still the same
BxG4ever said:
Hi.
I have a nexus 7 2012 edition which turns on with The Google written logo and under the screen with a padlock. After that it will be in bootloop with a black screen ( I can see the backlight turning on/off). This is also if pressing the power+volume down combination. Seems bootloader is corrupted. Anyway I installed everything on pc plus I'm using the WugFresh Nexus Root Toolkit and here are some examples which show what errors I'm encountering when trying to flash stock firmware .
Log:
Checking ADB/FASTBOOT Connectivity
adb devices
015d4a5ed8500c01 unauthorized
fastboot devices
There is also a notification popup which tells me:
"An ADB Interface device was found but it was listed as "unauthorized"
-Accept the RSA security prompt and check "Always allow from this computer"
At this point I don't know what to do, can you help me?
Click to expand...
Click to collapse
tnsmani said:
Google search is your friend. I found the following two methods which seems to have worked for some people.
1. If you are using OS X*:
Reboot your phone into recovery mode.
Connect it to your computer.
Open the terminal and type:
cd ~/.android
adb push adbkey.pub /data/misc/adb/adb_keys
All done! Just adb shell reboot and feel the power!
*For Windows 10, .android directory is located in your the base of your C:\User\user_name directory.
2. Go to where you have stored adb files, open that folder and press "CTRL+SHIFT+Right Click" and select and click on Open Command Prompt option
Now enter following command
adb start-server (Enter)
adb usb (Enter)
After that your device is no longer unauthorized and you should be able to use any command in your Android Mobile using PC/ Computer.
If these fixes don't work, SEARCH.
Click to expand...
Click to collapse
Tried your suggestion.. Which i might have tried eventually from googling.. Doesn't make any difference.
Fixed
After doing all the researches, i had to buy a new motherboard and then replace it. Installed new rom and now using it. Spared about 1400INR for a 32 gig version.
Anyone get ADB working? I'm getting a no permissions (udev rules) on my linux machine. I'm guessing we need to add the device into udev
EDIT: Solution for Ubuntu/Linux here: https://forum.xda-developers.com/showpost.php?p=73619079&postcount=20
hmm it works on my Mac though..
did you use Sudo?
stewa2jm said:
did you use Sudo?
Click to expand...
Click to collapse
Yeah, it's not working.. I tried adding the dev in my android.rules file and still nothing. I'm going to play with it more now
Sent from my PH-1 using Tapatalk
Do you need to update your ADB version on your Linux box? I had this issue at one point. With a different phone a couple years ago. Wouldn't recognize the device.
stewa2jm said:
Do you need to update your ADB version on your Linux box? I had this issue at one point. With a different phone a couple years ago. Wouldn't recognize the device.
Click to expand...
Click to collapse
I'm always on the latest version since I do a lot of Android development. I don't get why it's not working.. I've had to add devices in udev so many times, never did it give me an issue before. I'll see if I can figure it out though
Sent from my PH-1 using Tapatalk
ADB Debugging is on in Dev Options right? lol
I know its super basic, but got to check anyway.
whatever you figure out, please let us know! Good luck, and congrats on getting your device!
IM0001 said:
ADB Debugging is on in Dev Options right? lol
I know its super basic, but got to check anyway.
Click to expand...
Click to collapse
Really? Lol I did mention it works on my Mac, so yeah.. It's turned on.. I've even tried turning it off and then on again. [emoji1] [emoji1] [emoji1] [emoji1]
stewa2jm said:
whatever you figure out, please let us know! Good luck, and congrats on getting your device!
Click to expand...
Click to collapse
Will do!
Sent from my PH-1 using Tapatalk
any idea whats causing adb to not work?
drocny87 said:
I found a work-a-round to transfer your files from one phone to the Essential.
create a folder on your desktop and copy and paste all files you want transferred to the PH1. Once you have completed that just copy and paste those files from that folder to the phone.
Click to expand...
Click to collapse
wow, an extremely obvious solution to a problem no one asked about and has nothing to do with this thread!!
I've got ADB to connect somewhat. Instead of cd\sdk\platform-tools just run cd\sdk. ADB devices shows my phone, but once I ADB reboot bootloader, it will boot into the bootloader, but that's it.
I can't get it to work at all windows 10
Sent from my PH-1 using Tapatalk
I'm on Windows 10 as well. ADB works as long as the phone is booted into the OS. Once I enter the bootloader ADB nor fastboot can see the device
skw5115 said:
I'm on Windows 10 as well. ADB works as long as the phone is booted into the OS. Once I enter the bootloader ADB nor fastboot can see the device
Click to expand...
Click to collapse
What is your usb setting? Charging, file transfer?
bricky23 said:
What is your usb setting? Charging, file transfer?
Click to expand...
Click to collapse
I tried on both already
Sent from my PH-1 using Tapatalk
I got ADB working on linux. You need to add this to your 51-android.rules
#Essential
SUBSYSTEM=="usb",ATTR{idVendor}=="2e17", ATTR{idProduct}=="c032", MODE="0666", GROUP="plugdev"
I still can't get fastboot to work yet though. To get it to work I need to run: sudo $(which fastboot) devices
I'm going to play around with it more to see if I can get it to work just using fastboot devices
ADB is working on Windows 10, but as mentioned above, fastboot isn't recognized. Can't unlock the effing bootloader without that dammit.
---------- Post added at 08:20 PM ---------- Previous post was at 08:14 PM ----------
bricky23 said:
What is your usb setting? Charging, file transfer?
Click to expand...
Click to collapse
File transfer
Okay so to get it my PC to recognize the device in fastboot, I had to open Computer Management < Device Manager and find the device listed as Mata while booted into the bootloader. Windows didn't know what driver to use so I manually selected the Android Bootloader driver. You have to list all installed drivers on your machine and it should show up for windows 10 users. Device is now unlocked
skw5115 said:
Okay so to get it my PC to recognize the device in fastboot, I had to open Computer Management < Device Manager and find the device listed as Mata while booted into the bootloader. Windows didn't know what driver to use so I manually selected the Android Bootloader driver. You have to list all installed drivers on your machine and it should show up for windows 10 users. Device is now unlocked
Click to expand...
Click to collapse
Same here, just manually installed Google USB Driver and installed it as "Fastboot Interface" and it worked.
Ok I got adb and fastboot both working on Ubuntu/Linux now. Instead of adding the line I posted in my previous post just run this:
sudo sh -c "echo 'SUBSYSTEM=="usb", ATTR{idVendor}=="2e17", MODE="0666", GROUP="plugdev"' >> /etc/udev/rules.d/51-android.rules"
Then
sudo service udev restart
Then ubplug your device if it's plugged in via USB and then plug it back in. adb works as well as fastboot
Trying to run adb results in the USB notification to cycle off/on on the new Moto G5 Plus. I've tried multiple cables, computers, and a factory reset of the phone (both times with the factory image).
Has anyone encountered such an issue?
Basically, I can enable debugging mode and connect my computer, but the moment I issue `adb start-server` the USB notification on the phone begins to cycle. There is no message to authorize the device or anything. For what it's worth, this computer works fine with another device (as does the other). I've deleted the .android directory and saw no change, too.
badhat said:
Trying to run adb results in the USB notification to cycle off/on on the new Moto G5 Plus. I've tried multiple cables, computers, and a factory reset of the phone (both times with the factory image).
Has anyone encountered such an issue?
Basically, I can enable debugging mode and connect my computer, but the moment I issue `adb start-server` the USB notification on the phone begins to cycle. There is no message to authorize the device or anything. For what it's worth, this computer works fine with another device (as does the other). I've deleted the .android directory and saw no change, too.
Click to expand...
Click to collapse
I'm confused... What are you trying to do? I've never used that command...
acejavelin said:
I'm confused... What are you trying to do? I've never used that command...
Click to expand...
Click to collapse
The `start server` command just begins to run the adb daemon. It is run without explicitly issuing this command if you run something like `adb devices`. It's like setting up the environment without actually querying anything on the device.
badhat said:
The `start server` command just begins to run the adb daemon. It is run without explicitly issuing this command if you run something like `adb devices`. It's like setting up the environment without actually querying anything on the device.
Click to expand...
Click to collapse
I tried this just out of interest... revoked all ADB authorizations, rebooted my phone and PC, and connected and did a "adb start-server". It popped up the authorization windows like normal, I approved it and it worked like normal. Subsequent kill-server and start-server commands had no unusual effects either after revoking authorizations or not.
acejavelin said:
I tried this just out of interest... revoked all ADB authorizations, rebooted my phone and PC, and connected and did a "adb start-server". It popped up the authorization windows like normal, I approved it and it worked like normal. Subsequent kill-server and start-server commands had no unusual effects either after revoking authorizations or now.
Click to expand...
Click to collapse
OK, I tried using a different Android SDK (grabbed from https://dl.google.com/android/repository/platform-tools-latest-linux.zip) and now it's working. There must be something about the one my distribution packaged that is broken.
Code:
$ adb version
Android Debug Bridge version 1.0.39
Revision 8.0.0_r11
$ LD_LIBRARY_PATH=$PWD ./adb version
Android Debug Bridge version 1.0.39
Revision 3db08f2c6889-android
Installed as /home/badhat/Downloads/adb/platform-tools/adb
Been trying to get an adb connection to this phone. I'm on the latest Sprint available OTA (NMJ32F). Have not side loaded the later version. Never rooted.
When connecting the phone to PC, device manager shows "Essential Phone ADB" is working properly. I also tried the Google generic ADB driver. The phone also shows a notification "ADB debugging is connected. Tap to disable".
"adb devices” always returns empty. I am able to adb other devices.
I think the problem is the phone is not asking me to authorize the ADB connection as my other phones and tablets normally do.
Any idea?
Did you get permissions on your phone when popup appears?
No. The phone doesn't pop up the permission question. But I don't know why.
Don't know but as long as you don't give permission you can't sideload
Euclid's Brother said:
Been trying to get an adb connection to this phone. I'm on the latest Sprint available OTA (NMJ32F). Have not side loaded the later version. Never rooted.
When connecting the phone to PC, device manager shows "Essential Phone ADB" is working properly. I also tried the Google generic ADB driver. The phone also shows a notification "ADB debugging is connected. Tap to disable".
"adb devices” always returns empty. I am able to adb other devices.
I think the problem is the phone is not asking me to authorize the ADB connection as my other phones and tablets normally do.
Any idea?
Click to expand...
Click to collapse
Try the usb driver and SDK platform tools directly from Essential website:
https://www.essential.com/developer/current-builds
I am using the drivers from Essential website. However, I was using the lastest Unified Android Toolkit for the adb command. Looks like it may be outdated, as the adb.exe and it's dll's in the link from Essential website is newer. I will try the platform tools from there and see if there is a difference.
Thanks!
Is USB debugging enabled in Developer settings?
Are you in Fastboot? Did you try "fastboot devices"?
ADB devices returns your device is offline?