Has anyone had issues with their player randomly dropping connection to WiFi?
I only noticed this because I use Plex a lot. And after a few days it would stop playback and tell me it couldn't find the server. So naturally I though it was either an issue with my server (never had problems in the past) or the app.
Recently I noticed when I scroll through the apps the WiFi logo at the bottom shows its not connected.
I scrolled through setting to try and see if there's any advance settings I could tweak but there's not.
I will reset my netgear router when I get home. But has anyone experienced this yet??
Sent from my XT1060 using Tapatalk
Haven't had any issues staying connected to my AC68U over the past three days. Family streamed a few movies yesterday and last night and been playing music quite a bit without any problems. Hopefully resetting your router will fix your issue. Good luck.
I have also been having wifi issues on the nexus player. I have not updated to the recent image that was posted and was hoping that would fix the issue. I also have a usb ethernet adapter on the way. Not really impressed with the devices so far, am still using my mk808 primarily which the nexus player was supposed to replace
Edit: update by flashing the latest system.IMG and have not had WiFi drop out yet.
Elrondolio said:
Haven't had any issues staying connected to my AC68U over the past three days. Family streamed a few movies yesterday and last night and been playing music quite a bit without any problems. Hopefully resetting your router will fix your issue. Good luck.
Click to expand...
Click to collapse
I believe I got it acting right now. I saw in another thread issues with the player dropping 5ghz signal. It was suggested to just use 2.4 band instead. When I got home this morning I set up a separate network for the player to connect to with the player as the highest priority and it seems to be jam up.
Only other issue I'm seeing is my mkv blurays will only play for a few minutes then stop. They're huge files so I'm thinking this has something to do with it. Other than that I'm happy for now!
Sent from my XT1060 using Tapatalk
same problem. Fix?
I have had the exact same problem. If it isn't too much trouble, would you mind explaining how you did this? I am not too versed in network technology. I am guessing this is something I do on the d-link page? Is that correct?
Thanks so much.
codygs83 said:
I believe I got it acting right now. I saw in another thread issues with the player dropping 5ghz signal. It was suggested to just use 2.4 band instead. When I got home this morning I set up a separate network for the player to connect to with the player as the highest priority and it seems to be jam up.
Only other issue I'm seeing is my mkv blurays will only play for a few minutes then stop. They're huge files so I'm thinking this has something to do with it. Other than that I'm happy for now!
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
markculton said:
I have had the exact same problem. If it isn't too much trouble, would you mind explaining how you did this? I am not too versed in network technology. I am guessing this is something I do on the d-link page? Is that correct?
Thanks so much.
Click to expand...
Click to collapse
I've been using Plex for 4 years or so.. In my experience, nothing beats using Ethernet instead of Wifi...
I use TP Link Powerline extender to connect the Nexus Player (i also have a Roku next to it)... My plex media server is on a laptop connected directly to the router... I have tried everything and this set up is the fastest and the best resolution. NEVER buffers and i watch everything in 1080p.
Stop wasting time figuring out the wifi and go ethernet. You wont regret it.
Wifi needs to be better.
spyderman33 said:
I use TP Link Powerline extender to connect the Nexus Player
Click to expand...
Click to collapse
spyderman33 said:
Stop wasting time figuring out the wifi and go ethernet. You wont regret it.
Click to expand...
Click to collapse
How, precisely, do you have it connected? There is no Ethernet port on the Nexus Player--do you have a USB to Ethernet adapter that works? There is no arguing that Ethernet is the way to go with Plex and high bitrate; however, I rarely ever have any issues playing my 1080p stuff over Chromecast (which is 2.4Ghz N wifi only) and I have this device connected using 5Ghz 802.11ac so there should be no issues.
Sadly, mine will not stay connected to my 5Ghz 802.11ac network, it does seem to stay connected to my 5Ghz 802.11n access point a little better. I am pretty certain the Nexus Player has some wifi bugs that need to be worked out, ASAP! It's frustrating that Ethernet is not an option by default.
innoman said:
How, precisely, do you have it connected? There is no Ethernet port on the Nexus Player--do you have a USB to Ethernet adapter that works? There is no arguing that Ethernet is the way to go with Plex and high bitrate; however, I rarely ever have any issues playing my 1080p stuff over Chromecast (which is 2.4Ghz N wifi only) and I have this device connected using 5Ghz 802.11ac so there should be no issues.
Sadly, mine will not stay connected to my 5Ghz 802.11ac network, it does seem to stay connected to my 5Ghz 802.11n access point a little better. I am pretty certain the Nexus Player has some wifi bugs that need to be worked out, ASAP! It's frustrating that Ethernet is not an option by default.
Click to expand...
Click to collapse
Correct, I am using an MIcro USB to USB OTG Cable http://www.amazon.com/gp/product/B00D8YZ2SA/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
I am sure the bugs will get sorted out but until then, this is the best solution...
innoman said:
How, precisely, do you have it connected? There is no Ethernet port on the Nexus Player--do you have a USB to Ethernet adapter that works? There is no arguing that Ethernet is the way to go with Plex and high bitrate; however, I rarely ever have any issues playing my 1080p stuff over Chromecast (which is 2.4Ghz N wifi only) and I have this device connected using 5Ghz 802.11ac so there should be no issues.
Sadly, mine will not stay connected to my 5Ghz 802.11ac network, it does seem to stay connected to my 5Ghz 802.11n access point a little better. I am pretty certain the Nexus Player has some wifi bugs that need to be worked out, ASAP! It's frustrating that Ethernet is not an option by default.
Click to expand...
Click to collapse
i could argue that ethernet is not the way to go. FireTv/Ouya/Mojo Madcatz only have a fast ethernet port (100mbps max) and ac can go close to gigabit speeds. I get 833mbps on my Netgear r8000 on ac. I can easily play 20GB+ files without any drops. I even played REMUX blurays (as long as they arent VC1, which the firetv doesnt support either) and those files played just fine too. So unless you get a true gigabit port (which i know of no Android box having) 802.11ac is the ideal option for the Nexus Player. Dont waste your money with a gigabit to USB adapter because the NExus PLayer has a USB 2.0 which can only give you a max of 480mbps.
My suggestion is save some of that money you're saving from your cable bill, sell your current router and keep that $20 you would be spending on a USB to Ethernet adapter and invest in a wireless AC router, you can get a decent Route for $100.
http://www.amazon.com/TP-LINK-Arche...F8&qid=1416715312&sr=8-1&keywords=wireless+ac
Also what AC ROuter do you have? if its an ASUS than im sorry, i had a ASUS 87u and changed it for a Netgear r8000 because i had constant drops with ASUS, if you turn off Beamforming it will fix your wireless AC drops. at least it did for me.
---------- Post added at 08:08 PM ---------- Previous post was at 07:52 PM ----------
markculton said:
I have had the exact same problem. If it isn't too much trouble, would you mind explaining how you did this? I am not too versed in network technology. I am guessing this is something I do on the d-link page? Is that correct?
Thanks so much.
Click to expand...
Click to collapse
what kind of router do you have?
mejdam said:
i could argue that ethernet is not the way to go. Fire Tv only has a fast ethernet port (100mbps max) and ac can go close to gigabit speeds.
Click to expand...
Click to collapse
100Mbps is more than the device would likely ever need to stream any type of media one would stream on the Fire TV and it will get 100% of that bandwidth between the Fire TV and the switch (assuming you don't have a faulty cable, obviously) 100% of the time--regardless of what other devices on your network or your neighbors networks are doing. Sure, 802.11ac permits better than gigabit speeds... but that doesn't guarantee them. Also, there is the issue of signal degradation when you're further away from your router, the fact that it's shared bandwidth, etc. You could argue both ways but wired is definitely the more reliable option in most cases. The FireTV has either Fast Ethernet OR 802.11n, no gigabit speeds either way.
Sadly, the fire TV has issues with several audio codecs and just isn't what it should be (yet, at least). I'm kinda over the fact that I have to use an external player to play DD 5.1--which is part of the reason I decided to give the Nexus Player a try... that and I wanted to see what google could do this time around.
I have the Buffalo WZR-D1800H--It was an earlier model and not the greatest but it's worked flawlessly and lets me transfer at 40+MB/s on a different floor. I get around 12MB/s using my 802.11n 5Ghz AP upstairs (3 floors with the ac router on the first). If I got the Ethernet cable thing, I'd spend $10 on the 10/100Mbps since it would be sufficient but I shouldn't have to do that. All the other devices in my place do fine even on N, the Nexus Player should be working awesomely on ac... It just isn't and it has issues on N and G--I honestly think it may partly be a Plex issue. I think there are also some deeper wifi connectivity issues.
spyderman33 said:
Correct, I am using an MIcro USB to USB OTG Cable http://www.amazon.com/gp/product/B00D8YZ2SA/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1.
Click to expand...
Click to collapse
Cool, what are you using for USB to Ethernet? I have a few USB OTG cables (I got them pretty cheap when I got my first Nexus) and I might as well put them to some good use... I'd like for my Nexus Player to actually play my Plex media without all the issues! Would something like this work?: http://smile.amazon.com/Cable-Matters-Ethernet-Adapter-Black/dp/B00ET4KHJ2
****
I should also add that my NAS & Plex Server (PC, used for several things) are all wired over Gigabit. My wireless router doesn't have to do that much, generally, except connect my phone, Mac Book Pro, Chromecast in bedroom, SqueezeBox and a few other little things that don't use much data.
innoman said:
100Mbps is more than the device would likely ever need to stream any type of media one would stream on the Fire TV and it will get 100% of that bandwidth between the Fire TV and the switch (assuming you don't have a faulty cable, obviously) 100% of the time--regardless of what other devices on your network or your neighbors networks are doing. Sure, 802.11ac permits better than gigabit speeds... but that doesn't guarantee them. Also, there is the issue of signal degradation when you're further away from your router, the fact that it's shared bandwidth, etc. You could argue both ways but wired is definitely the more reliable option in most cases. The FireTV has either Fast Ethernet OR 802.11n, no gigabit speeds either way.
Sadly, the fire TV has issues with several audio codecs and just isn't what it should be (yet, at least). I'm kinda over the fact that I have to use an external player to play DD 5.1--which is part of the reason I decided to give the Nexus Player a try... that and I wanted to see what google could do this time around.
Cool, what are you using for USB to Ethernet? I have a few USB OTG cables (I got them pretty cheap when I got my first Nexus) and I might as well put them to some good use... I'd like for my Nexus Player to actually play my Plex media without all the issues! Would something like this work?: http://smile.amazon.com/Cable-Matters-Ethernet-Adapter-Black/dp/B00ET4KHJ2
Click to expand...
Click to collapse
yes my ac band of 833mbps is shared, so even if i have 8 constant devices on that band it still would be faster than a 100mbps wired connection. I own a firetv and have no issues with DD5.1 files from my Synology 1812+, by any chance are you using Samba shares from a windows box? if so thats your problem, switch to NFS shares. also wired connections are shared unless you run a router directly to your setup box without going through a switch. you didnt answer my question though, what ac router do you have that you're having issues with.
mejdam said:
by any chance are you using Samba shares from a windows box? if so thats your problem, switch to NFS shares. also wired connections are shared unless you run a router directly to your setup box without going through a switch. you didnt answer my question though, what ac router do you have that you're having issues with.
Click to expand...
Click to collapse
I added in, it may not have posted until you already started your reply. I accidentally posted before I added it in--I needed to check on the model.
The Ethernet connection is only shared if you are using a hub. A switch (I have a 16 port Gigabit switch that connects to my router) provides dedicated bandwidth to each available port--up to 2Gbps/port (1 up and 1 down, concurrently). My specific switch with 16 1Gbps ports can handle up to ~32Gbps worth of traffic at once. My Plex server is connected directly to the switch as is my NAS. The only way I'd have to worry about saturating the PC (Plex Server) to switch link is if I am transferring large amounts of data between the PC and my NAS and that's not common--and definitely not the cause of my issue. It's actually never caused me an issue. The link between the Fire TV and switch is always 100Mbps (assuming there isn't any broadcast traffic or that sort of thing, which isn't likely).
I do use NFS with everything except the media shares from my NAS, sadly. It is a goal but I am going to have to install the Enterprise version of Windows on my PC--Microsoft doesn't appear to support NFS (client) on Windows 8.x unless you have Enterprise and I have Pro. I guess that's what I get for actually paying for it? I am going to put Enterprise on my PC at some point but it's not a priority. Over Gigabit, SMB is sufficient for my use--the overhead isn't an issue right now. That said, I do use Plex so the media share between the Fire TV and my Server is Plex.
If you have your Plex server on let's say port 3 and multiple devices are talking to the Plex server than that line is being shared, which was my point. Again it would take over 8 devices on my ac band before its the speed of your single 100mbps line.
Over gigabit smb is sufficient? You just said you needed to connect a hard drive to your firetv to correctly play ac3 files. Clearly smb is your problem and you don't need to pay for NFS shares, there are free alternatives. Also the speed of your "network" might be gigabit but your speed to your firetv is truly only 100mbps because that's the max the Ethernet port can go. I'm not trying to pick a fight, I'm just saying that with the nexus player 802.11ac gives you the fastest speeds. Sure wred gigabit could be faster but there's one problem, there's no gigabit port or even fastethernet port.
mejdam said:
If you have your Plex server on let's say port 3 and multiple devices are talking to the Plex server than that line is being shared, which was my point. Again it would take over 8 devices on my ac band before its the speed of your single 100mbps line.
Over gigabit smb is sufficient? You just said you needed to connect a hard drive to your firetv to correctly play ac3 files. Clearly smb is your problem and you don't need to pay for NFS shares, there are free alternatives. Also the speed of your "network" might be gigabit but your speed to your firetv is truly only 100mbps because that's the max the Ethernet port can go. I'm not trying to pick a fight, I'm just saying that with the nexus player 802.11ac gives you the fastest speeds. Sure wred gigabit could be faster but there's one problem, there's no gigabit port or even fastethernet port.
Click to expand...
Click to collapse
I think there is a little bit of confusion. My Plex Server/PC are on say port 1 of my 16 port gigabit switch and is communicating with the switch at ~1Gbps. My NAS is on ports 2/3 and both ports are at a Gigabit (each NAS port has it's own IP--one is just used for my Mac and phone backups, the other is predominately used by my PC for Plex shares and whatever other files I put on there) and my FireTV is on port 4 at 100Mbps (limited by the FireTV). (I do not connect a hard drive to my Fire TV, I think someone else said that). I can stream to 3 different TVs (using a mix of a google TV (wired), Chromecast (wifi) and Fire TV (wired or wifi--same results either way) without any issues, buffering or otherwise, at full 1080p with ~12GB files all using Plex. It works near flawlessly most of the time. The only issue is that the Fire TV doesn't stream 5.1 audio (most of my content is AC3) UNLESS I use an external player (XBMC, etc...)--lots of info about this in the Plex forums.
The Fire TV does not have 802.11ac, it has 802.11n. Having it connected to an 802.11ac access point doesn't offer any real benefit other than they tend to do 802.11n slightly better than most 802.11n routers, presumably because they tend to be more powerful. There is no benefit for putting my FireTV on wifi over Ethernet--none what-so-ever since there is already an Ethernet port right next to it--because it will only add traffic to my wireless network. Putting it on wifi isn't going to give it much more bandwidth than having it connected Ethernet with the distance it is away from my 5Ghz router/AP (each is on a different floor) and the level of congestion around me on 2.4Ghz, which is on the same floor (I live in a Condo Complex in uptown Dallas, lots of other wifi routers). The connection between my Fire TV and my switch is ~100Mbps and the connection between my Plex Server is ~1Gbps. I can be moving files betwen my Plex Server and NAS at around 700-800Mbps and still play video on my FireTV from my Plex Server without any issues at it's max bitrate.
SMB is not my problem, I've been using it for a while. The Fire TV has some audio codec/passthrough issues with it's native player. If I switch to SPMC or XBMC and PlexBMC, I can play AC3 5.1 fine straight from my Plex server. I can also select External Player within Plex and play media through any external player such as XBMC without any issues with audio. The problem is that it's a pain to do it that way and it doesn't keep up with watched history, etc. like it should. You also have to manually choose the external player you want to use each time and there are issues with exiting some of them, FF/Rew, etc. The Nexus seems to be able to play my media fine with full AC3 5.1 surround... except it chokes randomly, freezes, etc. and that appears to be related to the wifi. I never said I would be paying for NFS! I will most definitely not be giving Microsoft more of my money to get a simple feature that should have been available in the pro version. As for the free options, I've tried several and they are flaky--so annoying. There is a good NFS server for Windows (Hanewin or something like that) that I've used (and actually run on my moms setup) but I need a client because my NAS does NFS. The free clients I've tried just aren't what they should be, many are dated. The good clients want money.
Ultimately, the fact that the Ethernet port on the FireTV isn't really relevant because that's all that specific port needs to be, I don't have any media with anywhere near a 100Mbps bitrate. Using a switch means that port gets 100% of its bandwidth 100% of the time regardless of what else my network is doing. A lot of people think a switch and a hub are the same thing because they look the same and kind of function the same, but they are quite different. A switch is able to provide each port it's dedicated bandwidth to each other port (traffic is only sent to the port it's designated for) and a hub is totally shared across all ports (traffic from every port is seen by every port). (I'm not suggesting you don't already know this, please don't take offense.) Sorry, I know that's a lot of info, I just want to try to clarify. It's so much easier with a whiteboard! The end result, however, is that something is not right with either the Nexus Player or Plex--I think there are issues with both considering my Nexus Player has issues connecting to my router and both access points and loses connection randomly and that when it is connected, YouTube/Hulu/Netflix all play pretty well. I, also, am not trying to argue--I'm just trying to clarify my situation.
Also, you mention if I have my Plex server on port 3 and multiple clients talking to that port... it's shared. True, but it's a gigabit connection being shared. Unless there are a whole lot of clients communicating with that Plex Server, it's not going to saturate so there should still be plenty of bandwidth for any other Plex client I might have on other ports. It would take 10 Fire TVs each playing close to a 100Mbps (bitrate) media clip to saturate my Plex Server connection (assuming there is nothing else communicating with my Plex server).
"Cool, what are you using for USB to Ethernet? I have a few USB OTG cables (I got them pretty cheap when I got my first Nexus) and I might as well put them to some good use... I'd like for my Nexus Player to actually play my Plex media without all the issues! Would something like this work?: http://smile.amazon.com/Cable-Matters-Ethernet-Adapter-Black/dp/B00ET4KHJ2"
I am actually using an Apple USB to Ethernet adapter that I had lying around and never use... Its exactly like this one.
http://www.amazon.com/Apple-MB442-U...1416754525&sr=8-1&keywords=apple+usb+ethernet
I think you can use any generic one really..
It was plug and play, didnt ask for anything, it just said it was connected to Ethernet when I checked.
If anyone else is having connection issues check you Date and Time. My Nexus Player was connected but but none of the apps could connect to anything. Upon checking dmesg I saw a lot of these error exceptions
Code:
Caused by: com.android.org.bouncycastle.jce.exception.ExtCertPathValidatorException: Could not validate certificate: Certificate not valid until Fri Apr 05 09:15:55 MDT 2013 (compared to Fri Dec 31 19:41:48 MST 1999)
Turns out all the Google apps use SSL and since my date was set to 1999 the certs showed up as invalid, I have automatic time turned on.
So for now just set your date manually and don't use Automatic Date&Time.
My NP is only able to connect to 2.4Ghz wireless. I have 2 different SSID's (2.4 and 5.0) and NP can see the 5.0, but gives an error that it can't find the network after you enter the password and try to connect.
The NP also keeps on dropping the 2.4Ghz Wi-Fi connection. I have many wireless devices on this network on both 2.4 and 5.0 Ghz working just fine so I know that the router is not the issue. (Asus RT-N66U)
I'm seeing similar issues, problems with 2.4ghz and worse with 5ghz. I'm using a USB to ethernet adapter and it was working pretty well when I was home. I left for the weekend so I only got a few hours to play with it but no issues
I too had trouble connecting to 5Ghz until I manually set the channel to 48 in my ASUS DSL-AC68U router. It won't connect to any 3 digit 5Ghz channels like 149 etc.
I am having issues with most 1080p content, even over Ethernet. There are just issues with the device and with Plex that need to be worked out. Google needs to get to work on it now!
Related
I got my Shield tv console delivered yesterday, (late as possible damn ups) and love it so far, haven't had enough time to play more, but after work today I will. I have an asus rtac68w, which according to nvidia is a held ready router, but I need to know what and how to set up my router to optimally perform for my shield tv and streaming.
Any help people?
The Shield is like any tablet or smartphone. There is nothing "special" to set up in the router for it
It's just highly recommended to use a wired connection for the Shield but have wifi configured too because they're known bugs with current firmware when the network isn't wifi. So sometimes you need to switch to wifi to do some stuff then back to wired for optimal performance. They'll fix this later I guess.
ps: go there : https://forums.geforce.com/default/board/159/ instead of XDA, you'll find official NVidia reps. XDA is ignoring the Shield Android TV so let's us leave.
Basically, to set it up best; Connect it to ethernet that goes straight into the router. That said, You want to make sure it connects to your 5GHz network, that your 5GHz network does not have legacy support enabled (AC only if possible with no N or A support). WMM and BeamForming is helpful sometimes. Those are the basics.
So, whatever you would do to optimize your WiFi for GameStream or GRID on the Shield Tablet or Shield Portable, you could do the same things here, plus the option of straight gigabit ethernet.
I hadn't heard of the issues with the Wired ethernet personally, hopefully they fix that pretty quickly. It may be specific to certain environments or other issues. Also, I know that the controllers use WiFi-Direct (rather than BT), however anything with that causing part of the networking fails would be pure speculation on my part.
I haven't had any issues with Ethernet
ryocoon said:
Also, I know that the controllers use WiFi-Direct (rather than BT), however anything with that causing part of the networking fails would be pure speculation on my part.
Click to expand...
Click to collapse
Actually it's the wired connection that 'might' mess with the initial controler pairing:
from a NVidia rep:
https://forums.geforce.com/default/topic/836884/?comment=4546797
If you are unable to pair your SHIELD Wireless Controller during initial setup and your SHIELD Android TV is connected to your network over ethernet, try temporarily disconnecting your ethernet cable to go into WiFi mode and check if pairing issue is fixed.
Click to expand...
Click to collapse
I haven't had problems either hardworking the console or using the Shield Tablet in console mode and using a Micro USB ethernet connector to hardwire the tablet. I must say that I get less lag streaming games in 4K from my PC using the console vs the tablet. I just wish I could sideload Amazon Prime Instant Video and M-Go so I could stream whatever 4K video content they offer besides only Netflix and YouTube video in 4K. No studdering, no buffering, just good quality 4K video from this thing. I must say, this console could have a major impact over how games could be delivered in the future. No latency at all except 1st person shooters being streamed via Grid. This is the best device I've bought in a long time.
I had some issues with DHCP when first setting up my unit on a wired connection. It kept disconnecting from the internet even when showing a connection. I set up my IP manually and updated to 1.2 and have had no issues since...it is super fast but may still setup wifi as you said just incase.
Rolldog said:
I haven't had problems either hardworking the console or using the Shield Tablet in console mode and using a Micro USB ethernet connector to hardwire the tablet. I must say that I get less lag streaming games in 4K from my PC using the console vs the tablet. I just wish I could sideload Amazon Prime Instant Video and M-Go so I could stream whatever 4K video content they offer besides only Netflix and YouTube video in 4K. No studdering, no buffering, just good quality 4K video from this thing. I must say, this console could have a major impact over how games could be delivered in the future. No latency at all except 1st person shooters being streamed via Grid. This is the best device I've bought in a long time.
Click to expand...
Click to collapse
What happens when you side load Amazon video and M-Go? I was able to side load a bunch of apps (including M-go but didn't run it yet) from my rooted samsung Note 2014 by backing up my apps with Titanium to the micro sd. I then moved the micro sd to the Shield TV and used ES File Explorer to auto open some of the zips that contained the APK and installed from there. From my memory, since I'm not at home to check what else I side loaded, I have the following working so far:
Chrome Browser
Dolphin Browser
Dropbox
Google Drive
Popcorn
Showbox
Helium
Facebook
Hulu Plus
Photo Circle
Speedtest
Ppsspp
And jut tested m-go
I'll add that when I first set up the Pro yesterday on a wired connection, it had all sorts of problems -- including not being able to download the update. Had to go wireless to get the update, but by that point it was acting so strange I did a full factory reset right after. (1.0 seemed quite buggy, but 1.2 feels fantastic so far. HUGE strides!). Haven't had problems since.
kgersen said:
The Shield is like any tablet or smartphone. There is nothing "special" to set up in the router for it
It's just highly recommended to use a wired connection for the Shield but have wifi configured too because they're known bugs with current firmware when the network isn't wifi. So sometimes you need to switch to wifi to do some stuff then back to wired for optimal performance. They'll fix this later I guess.
ps: go there : https://forums.geforce.com/default/board/159/ instead of XDA, you'll find official NVidia reps. XDA is ignoring the Shield Android TV so let's us leave.
Click to expand...
Click to collapse
The only problem I have with the GeForce forum is there is no way to be notified if you get a reply from anyone. Is there any work around for this?
lartomar2002 said:
The only problem I have with the GeForce forum is there is no way to be notified if you get a reply from anyone. Is there any work around for this?
Click to expand...
Click to collapse
not that I know of. The NVidia forum software is very old and bad, everyone agree on that.
I use Feedly and a RSS subscription to monitor the GeForce forum, it's a bit easier.
I have Amazon Prime Video sideloaded, and it works great. Unfortunately, I think a different version utilizes UHD video because I haven't been able to find any 4K content. Netflix and YouTube have some 4K content, and I've been able to stream some games in 4K, but until the UHD content providers start releasing their content to more devices instead of them signing exclusivity contracts (Samsung) to help them offset the royalties on the H.265 content, which is quadruple what H.264 was, I think most people will be limited on 4K content. Sucks.....
I got in on the $50 NP deals a little bit ago. It's been a neat little device aside from a couple issues. First, nothing can cast to it. Various phones, tablets try to connect then give up with a "Unable to connect to device" error. I have Chromecasts and they work flawlessly. I have done a factory reset or two without any improvement. Another oddity is that from my desktop computers, most of the time the device doesn't even get listed from the Chromecast icon (No cast devices found). One exception seems to be Youtube. There it shows the device, but still never sends anything to the Player.
The other issue I've had is that Netflix plays 1-5 seconds of a show before popping up it's aip-703. Netflix's web site gives a few suggestions, remove and readd account and the like, but that hasn't helped.
The only other thing I can think of is that the upgrade to Marshmallow might magically fix things, but I'm not holding out much hope. Any other suggestions?
I bet the casting problems you're getting are due to the NP's dodgy wi-fi connectivity. It's got compatibility issues with loads of different routers. I for example have a dual band router and since I moved the NP over to the router's 2.4GHz band, I have been able to cast without issues. And this sucks since I prefer it to connect to the 5GHz band for throughput and interference reasons. If you get any chance to try this with a different router you'll most likely see that those issues go away...
I was wondering that too, so I picked up an OTG cable and connected my Wii's ethernet adapter. Devices still aren't able to connect to the NP's casting receiver. So much for that...
In dealing with the Netflix thing, I decided to give their support a try. Surprisingly, they were very easy to deal with as far as tech support phone lines are. We tried a few things, but weren't able to settle on anything more than maybe it's the ISP's fault (Comcast). One interesting thing was they were able to pull up a demo movie that displays the current bitrate that you're getting. It was only pulling 1700kbps before getting the error. At other devices I get a similar rate, up to 3000kbps. I don't see how if Comcast were throttling Netflix connections, it should fail on any device rather than just this one (phones, tablets, computers, Chromecast, GoogleTV work just fine).
I've been able to cast on both NP I have without an issue. They were both running 5.1.1 and connected through 5Ghz wifi. I updated one to 6.0 and now I have the high brightness issue.
Both the casting and Netflix app got updated yesterday. Hopefully that will fix your problems
Casting no longer powers on TV via HDMI
Has anyone else experienced that casting no longer wakes up a powered-off TV?
Since I got my NP, starting to cast (with the TV off) would power on the TV and set it to the correct input (via HDMI commands sent from the Nexus Player). But, since yesterday (6.0 upgrade and new Cast Receiver - not sure which is to blame) this no longer happens. Is this now a configurable setting somewhere? I do observe that I can still use my TV remote's d-pad to control the Nexus Player, so believe HDMI-CEC is still active and configured correctly on the TV.
I loved this feature (prevented me from needing my TV remote!) and sad that it's now broken.
Hello
Does the nexus player have all Chromecast features? I mean can i stream my files from my phone to the nexus player? The new Chromecast had improvements in streaming speed, so which device is faster?
Sorry for my english
I've used both. On WiFi they are the same speed, however both work faster when plugged into Ethernet.
For the price, nexus player has many many more features, well worth the additional $15
Markolc said:
I've used both. On WiFi they are the same speed, however both work faster when plugged into Ethernet.
For the price, nexus player has many many more features, well worth the additional $15
Click to expand...
Click to collapse
Can you recommend an ethernet adapter that works well with the NP? TIA!
This will work fine
Can't get much simpler and reviews are good enough.
Get A 5 Port Ethernet Adapter Always
qualitymove13 said:
Can you recommend an ethernet adapter that works well with the NP? TIA!
Click to expand...
Click to collapse
Here you go
guy, the beast, always get a 5 port Ethernet adapter, also you will need a OTG cable http://www.amazon.com/gp/product/B00D8K3GGO?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 !
qualitymove13 said:
Can you recommend an ethernet adapter that works well with the NP? TIA!
Click to expand...
Click to collapse
This is the one I bought. Works fine for me!
http://www.amazon.com/Inateck-Gigabit-Ethernet-Converter-Network/dp/B00IJU0K2Q
I like my NP, but I think it's unfair to simply assert that NP wins because "it does everything that Chromecast does." The NP has great features that the Chromecast doesn't (onscreen UI, remote, gaming, etc.) have; if you want those features, the NP is great (but probably not as good as other products on the market with bigger app ecosystems, like Fire TV or Roku). If casting video content is your top priority, it's worth noting that the NP does not perform as well as Chromecast as a Google Cast device. The two main issues are:
1. My NP (on my main TC) doesn't always show up as a castable device, even when my Chromecast (bedroom TV) appears without issue.
2. It turns out that some Chromecast-compatible apps do NOT support Google Cast on the NP, as was the case with the HBO Now app that was released a couple of months ago. This is pretty rare, and basically every other cast-enabled app I've used seems to support both Chromecast and the NP, but the HBO Now debacle (when combined with #1) clearly suggests that the Google Cast implementation on the NP differs from what we see on Chromecast.
In addition to Cast issues, I've experienced a lot of bugs/crashes/etc. with my NP. Things on my NP seem to be stabilizing, but it's clear to me that Chromecast is a more mature and stable product at the moment. Given that so many more people own Chromecasts than NPs, updating Chromecast will probably remain Google's higher priority.
Overall, I'm still happy with my NP, but it's still a work in progress. I'm not sure that I'd recommend it over Roku or Fire TV (or even Apple TV) for people looking to add smart features/apps to their TV... and if you're looking for a cheap way to watch Netflix on your TV, you can't really beat Chromecast.
whmaurer said:
I like my NP, but I think it's unfair to simply assert that NP wins because "it does everything that Chromecast does." The NP has great features that the Chromecast doesn't (onscreen UI, remote, gaming, etc.) have; if you want those features, the NP is great (but probably not as good as other products on the market with bigger app ecosystems, like Fire TV or Roku). If casting video content is your top priority, it's worth noting that the NP does not perform as well as Chromecast as a Google Cast device. The two main issues are:
1. My NP (on my main TC) doesn't always show up as a castable device, even when my Chromecast (bedroom TV) appears without issue.
2. It turns out that some Chromecast-compatible apps do NOT support Google Cast on the NP, as was the case with the HBO Now app that was released a couple of months ago. This is pretty rare, and basically every other cast-enabled app I've used seems to support both Chromecast and the NP, but the HBO Now debacle (when combined with #1) clearly suggests that the Google Cast implementation on the NP differs from what we see on Chromecast.
In addition to Cast issues, I've experienced a lot of bugs/crashes/etc. with my NP. Things on my NP seem to be stabilizing, but it's clear to me that Chromecast is a more mature and stable product at the moment. Given that so many more people own Chromecasts than NPs, updating Chromecast will probably remain Google's higher priority.
Overall, I'm still happy with my NP, but it's still a work in progress. I'm not sure that I'd recommend it over Roku or Fire TV (or even Apple TV) for people looking to add smart features/apps to their TV... and if you're looking for a cheap way to watch Netflix on your TV, you can't really beat Chromecast.
Click to expand...
Click to collapse
The thing about it is, a new Chromecast is $35, though I've seen it for $30 on sale recently. I've seen the nexus player on sale for $40 at a few places. For the extra $10, the nexus player does much more than the Chromecast, and can function essentially the same as a Chromecast, save for the HBO now app.
Also I perceive casting to the NP is much quicker than my Chromecast on wifi. It's a stronger machine.
For those of you suggesting the RJ45 + USB3.0 hubs, isnt the microUSB port on the back of the NP just a usb2.0 connection? Does adding a USB3.0 hub for expanded memory actually do anything since it should be throttled down to 2.0 speeds at the back of the NP? Or should we just look at getting a 2.0 hub and save a few extra $$$?
Im asking because Im currently looking into my options to expand my memory now that Android6.0 has hit our devices.
Correct, its only 2.0 speed. Save some money. No reason the adapter should cost more than the NP.
whmaurer said:
I like my NP, but I think it's unfair to simply assert that NP wins because "it does everything that Chromecast does." The NP has great features that the Chromecast doesn't (onscreen UI, remote, gaming, etc.) have; if you want those features, the NP is great (but probably not as good as other products on the market with bigger app ecosystems, like Fire TV or Roku). If casting video content is your top priority, it's worth noting that the NP does not perform as well as Chromecast as a Google Cast device. The two main issues are:
1. My NP (on my main TC) doesn't always show up as a castable device, even when my Chromecast (bedroom TV) appears without issue.
2. It turns out that some Chromecast-compatible apps do NOT support Google Cast on the NP, as was the case with the HBO Now app that was released a couple of months ago. This is pretty rare, and basically every other cast-enabled app I've used seems to support both Chromecast and the NP, but the HBO Now debacle (when combined with #1) clearly suggests that the Google Cast implementation on the NP differs from what we see on Chromecast.
In addition to Cast issues, I've experienced a lot of bugs/crashes/etc. with my NP. Things on my NP seem to be stabilizing, but it's clear to me that Chromecast is a more mature and stable product at the moment. Given that so many more people own Chromecasts than NPs, updating Chromecast will probably remain Google's higher priority.
Overall, I'm still happy with my NP, but it's still a work in progress. I'm not sure that I'd recommend it over Roku or Fire TV (or even Apple TV) for people looking to add smart features/apps to their TV... and if you're looking for a cheap way to watch Netflix on your TV, you can't really beat Chromecast.
Click to expand...
Click to collapse
I would've said the same, prior to the Marshmallow upgrade; whether the Cast icon would appear in Cast enabled apps was a matter of pure luck, as well as the "cast screen to" feature on Android devices. I got a lot of Cast connection losses as well, while the content was then still playing on the TV, without any possibility to control it (other than stopping it via the Nexus Player remote).
But all of those issues are fixed now with the Marshmallow upgrade (and I guess the various Google Cast Receiver app updates, that have been released since then).
The one thing that I find absolutely unacceptable is the following fact which you have mentioned as well: That the Nexus Player seems to be a 2nd class Google Cast device, which is e.g. not supported by Spotify, while working perfectly fine on Chromecasts. Google is allowing fragmentation of their Cast ecosystem because of this and this might be the beginning of the end of its acceptance, especially when it comes to Smart TVs that are shipped with Android TV and for which all companies involved are especially advertising the Cast functionality.
To the user who mentioned that both, the Nexus Player and the Chromecast are loading/streaming faster over Ethernet than over Wi-Fi: I strongly doubt that this is the case, especially since, as mentioned above, the available Ethernet adapters are only USB 2.0 capable. If you're talking about an Nvidia Shield TV I'd believe you, since that one supports Gigabit Ethernet natively, but regarding Chromecasts and Nexus Players... maybe if your wi-fi is horrible or you're using 2.4GHz wi-fi only... otherwise...no, not at all.
Anyway, since the original question was something like "Chromecast vs. Nexus Player": I have both, and I fully replaced my Chromecast with my Nexus Player since I have found that it makes the Chromecast redundant.
Some advantages of the Chromecast that should be considered:
-It's perfectly suited for taking it with you when traveling, while the Nexus Player is more of a fixed device that you set up once, connect it to your TV and leave it there.
- The Chromecast might reboot a couple of seconds faster than the Nexus Player, in case you shut off your devices often.
- The Chromecast allows you to adjust the backdrop e.g. with weather data and specific background images; the similar looking stock-backdrop of the Nexus Player cannot be modified at all.
- The Nexus Player wants you to sign into a specific Google account, whereas the Chromecast only requires you to set up a wi-fi.
- Chromecast doesn't need a wall socket and can be powered by your TV's USB port (even though using a real power adapter is recommended due to stability reasons).
- As mentioned, Chromecast isn't treated as a 2nd class Cast device by e.g. HBO (lol) and Spotify.
- You won't have to deal with yet another remote control in addition to your TV's, your audio system's and what-not remote controls, if using a Chromecast
- Google so far hasn't dared to release a firmware upgrade for the Chromecast which increases the brightness to a bazillion % and causes all blacks to look washed-out as hell.
I'm not gonna mention any advantages of the Nexus Player here as I've already said that I, personally, prefer the Nexus Player; I think it comes down to personal preferences regarding the above-points. Some things might be more important to some people, while others aren't, the same goes for what compromises are acceptable to the specific user.
Markolc said:
Correct, its only 2.0 speed. Save some money. No reason the adapter should cost more than the NP.
Click to expand...
Click to collapse
Only problem is there are no USB 2.0 ethernet adapters that also have USB passthrough.
priddyma said:
Only problem is there are no USB 2.0 ethernet adapters that also have USB passthrough.
Click to expand...
Click to collapse
I don't quite know what you mean? I have a 2.0 USB hub\ethernet hybrid plugged into my nexus players. It gives me 3 full size USB ports and Ethernet.
Anywhere I have searched didn't have a plethora of USB 2.0 hubs with ethernet that were that much cheaper than the 3.0 models.
I don't see the point of an ethernet adapter for the Nexus Player any way, the theoretical speed limit of USB 2.0 is 480mbps which equal 60MBps meaning that you are throttling yourself compared to your WiFi speed.
priddyma said:
Anywhere I have searched didn't have a plethora of USB 2.0 hubs with ethernet that were that much cheaper than the 3.0 models.
I don't see the point of an ethernet adapter for the Nexus Player any way, the theoretical speed limit of USB 2.0 is 480mbps which equal 60MBps meaning that you are throttling yourself compared to your WiFi speed.
Click to expand...
Click to collapse
And realistically you would be lucky to get even half that 60 MBps speeds on the 2.0 port. Chances are your only seeing about 25-30, and a Ethernet port adapter has to share the data with all the other devices you may have plugged into the hub as well. The WiFi AC is every bit 5-10 faster than the USB port on this device. The Ethernet adapter idea is only reasonable if that is all you have for a connection. Otherwise your 5ghz N or AC will blow away the USB port, depending on your network and internet speeds of course.
SkOrPn said:
And realistically you would be lucky to get even half that 60 MBps speeds on the 2.0 port. Chances are your only seeing about 25-30, and a Ethernet port adapter has to share the data with all the other devices you may have plugged into the hub as well. The WiFi AC is every bit 5-10 faster than the USB port on this device. The Ethernet adapter idea is only reasonable if that is all you have for a connection. Otherwise your 5ghz N or AC will blow away the USB port, depending on your network and internet speeds of course.
Click to expand...
Click to collapse
All I can tell you is this. On my 5ghz WiFi, nighthawk ac1900 router, I will get occasional drops and hiccups streaming my uncompressed bluray rips, and on occasion streaming from my HDHomerun Prime. When over WiFi, I get none of those issues ever. It's just a more reliable connection. Downloading from the Play store, the WiFi wins, however streaming a 2 hour movie (30gigs), the hard wire connection will give me a flawless performance. It just takes a few seconds of WiFi interference to interrupt a movie or good football game on TV.
Markolc said:
All I can tell you is this. On my 5ghz WiFi, nighthawk ac1900 router, I will get occasional drops and hiccups streaming my uncompressed bluray rips, and on occasion streaming from my HDHomerun Prime. When over WiFi, I get none of those issues ever. It's just a more reliable connection. Downloading from the Play store, the WiFi wins, however streaming a 2 hour movie (30gigs), the hard wire connection will give me a flawless performance. It just takes a few seconds of WiFi interference to interrupt a movie or good football game on TV.
Click to expand...
Click to collapse
Your WiFi should have big enough buffer to handle a few seconds of WiFi interference... Never had a single problem on a Chromecast wireless in a highly congested 2.4GHz area....
The Chromecast app from Google in the Google PlayStore doesn't even detect my Google Nexus Player (on the same wifi network).
The "Video & TV Cast | Nexus Player" app does. The developer for that app has a separate version for Nexus Player, Chromecast device, Samsung TV, etc.
Nate2 said:
The Chromecast app from Google in the Google PlayStore doesn't even detect my Google Nexus Player (on the same wifi network).
The "Video & TV Cast | Nexus Player" app does. The developer for that app has a separate version for Nexus Player, Chromecast device, Samsung TV, etc.
Click to expand...
Click to collapse
I'm not sure why the Chromecast app would ever need to detect your NP. It's not like you could use that app to configure it.
Maybe it was just my assumption that the Google Nexus Player (which supports casting) would use the Chromecast protocol(?) from Google.
Apparently, there is also a Googlecast protocol that is different from Chromecast?
My Samsung phone has it's own casting protocol that works great with my Samsung HDTV.
Sent from my SGH-M919 using Tapatalk
Hi guys I have a quick question. What do you think about Ethernet vs WiFi in terms of performance of internet.
Obviously Ethernet is better and solid option but can I go with WiFi and expect 100% of Game Streaming, 4K streaming etc. Shield is AC compatible I picked up Linksys 1900AC today for OpenWRT and well ...this guy. And thinking right now if I should run a wire (Router will be in a separate room from Shield) or stick with WiFi.
My internet is 50 by 25 and because right now I do not have AC router I am using N router and I am getting around 15Mbps (out of 50) when using phone standing in same place where my Shield will be.
Thinking 1900AC will give me better speeds will I be able to do whatever I want ?
I know it's a tough say because unless you try you will not know but in general what is your experience with Shield ? Ethernet or WiFi ?
P.S.
I have this HUUUUGE movie library on PC and I would love to access it with Shield. I am not sure yet on what I'll use as streaming server. I really hope I can use my new 1900AC router with some sort of Streaming server on OpenWRT platform so I don't have to turn on my main computer every time I want to watch something from my library. I mean there is KODI but let's say I want my own BluRay rips ... what is best method right now for Streaming such videos ? (most rips are in MKV)
I have same router and use them together in the same room. But have no problem steaming when i take the shield downstairs. I use VLC to stream
Sent from my Oneplus One using Tapatalk
A wired connection is always superior. If you have the option to run a cable, do it.
That doesn't mean you can't be happy with ac wifi. With good conditions it's totally fine for streaming.
Sent from my SHIELD Tablet using Tapatalk
Homeplug is another option.
NiHaoMike said:
Homeplug is another option.
Click to expand...
Click to collapse
I have Devolo homeplugs in my house, but I got terrible results with the Shield TV. I had trouble using Geforce Now with really crappy performance.
I unplugged it and went to wifi when trying out an FTP program (you can't have both wifi and ethernet connected), and performance went way up with WIFI.
my experience with wifi has always been bad (maybe because i live in a block of units with lots of routers around)
I don't trust it for anything as intensive as streaming.
I have no issues whatsoever besides an occasional microstutter when streaming games. I need to explain that i have a pretty optimal setup though. smaller home, centrally placed router, and 110mbps internet.
Using 802.11AC will probably help. I have my router in another room in my apartment, and there's a lot of 2.4GHz wifi traffic, but 5GHz is a lot more sparse. For 5GHz, I've found that line of sight isn't as important as an unobstructed path. For example, there's already a wall between the router and my TV setup, but if I close the door between the rooms, the signal drops by 5dB.
tonkemaskin said:
I have Devolo homeplugs in my house, but I got terrible results with the Shield TV. I had trouble using Geforce Now with really crappy performance.
I unplugged it and went to wifi when trying out an FTP program (you can't have both wifi and ethernet connected), and performance went way up with WIFI.
Click to expand...
Click to collapse
Try updating the firmware for the homeplugs. That can make quite a difference. If you're good with electronics, you can hack them to run over phone line and get nearly all of the advertised speed.
NiHaoMike said:
Try updating the firmware for the homeplugs. That can make quite a difference. If you're good with electronics, you can hack them to run over phone line and get nearly all of the advertised speed.
Click to expand...
Click to collapse
They are all updated. The managing program reports 200 Mbit connection between that one and the base that's connected to the router, so it should be plenty to pass my 100 megabit line along.
200Mbps is pretty old. 500Mbps and above seems to be the norm nowadays.
Doesn't the Shield have gigabit? Then wired will be way better than even AC.
Mine is wired.
Neo3D said:
Doesn't the Shield have gigabit? Then wired will be way better than even AC.
Mine is wired.
Click to expand...
Click to collapse
Only if you have another device that can transmit at 125MB/s. Most won't, so the difference is negligible unless you have a crappy WiFi signal.
NiHaoMike said:
200Mbps is pretty old. 500Mbps and above seems to be the norm nowadays.
Click to expand...
Click to collapse
The plugs are 500 mbps theoretical speed. The wiring in your house will determine how fast they actually function.
Hi everybody,
does anybody know how to setup at the nvidia shield tv, that it is prefering 5 ghz wlan (AC)?
I have one SSID with bgn 2,4 ghz and ac with 5 ghz.. The Shield is always connecting to 2,4 ghz.
The Problem is then that i cant stream 4k uhd content with 2,4 ghz - with 5 ghz no problem...
Thanks!
chrizz
-chrizz- said:
Hi everybody,
does anybody know how to setup at the nvidia shield tv, that it is prefering 5 ghz wlan (AC)?
I have one SSID with bgn 2,4 ghz and ac with 5 ghz.. The Shield is always connecting to 2,4 ghz.
The Problem is then that i cant stream 4k uhd content with 2,4 ghz - with 5 ghz no problem...
Thanks!
chrizz
Click to expand...
Click to collapse
The easiest way is to split the 2.4GHz and 5GHz SSIDs into different names.
Well i know that it will work when i use different ssids.
But i dont want to do that.. Because i want one SSID for all my devices to use up and downstairs..
Is there a way if i want to use only one SSID?! Thanks
80211ac will run whatever you throw at it content wise. 50mbps is decent but tcp overhead will eat about 8mbps and then you have to split that between all devices on the network. To stream say uhd, that's not gonna cut it, even if it's hevc. But 720 and below should be fine.
-chrizz- said:
Well i know that it will work when i use different ssids.
But i dont want to do that.. Because i want one SSID for all my devices to use up and downstairs..
Is there a way if i want to use only one SSID?! Thanks
Click to expand...
Click to collapse
Sideload this app: https://play.google.com/store/apps/details?id=de.dzitrone.wifi.five
Not sure if it will work on the Shield but I use it on my phone and it works fine, it briefly sets the wifi preference to 5GHz after a couple of minutes when connecting to the wifi and forces the devices to swap to 5GHz. I've had no issues with it.
I have both gigabit and ac wireless at home, and for streaming, I have not noticed any difference between the two. I still use wired anyway as I already have a gigabit switch to serve everything around the TV.
As for powerlines, they're only as good as your home electrical wiring. They offer better latency than wireless, but I found in poorly wired homes, they gave poor speeds.
I need someone who uses an HDHD for live TV on the Nexus Player to check if they can still connect to the HDHR or not. I am unable to connect to it on either of my Nexus players or on my Nexus phone, all of which are on Android 6.0.1 with Jan 1st security patch. My Android 5.1.1 tablet and windows PC has no issues so I suspect it's an incompatibility issue with either Android 6.0.1 or the most recent security patch. If it's confirmed I'm going to need to figure out how to roll back to a version that still works...
Sent from my SM-P600 using XDA Premium HD app
kisrita said:
I need someone who uses an HDHD for live TV on the Nexus Player to check if they can still connect to the HDHR or not. I am unable to connect to it on either of my Nexus players or on my Nexus phone, all of which are on Android 6.0.1 with Jan 1st security patch. My Android 5.1.1 tablet and windows PC has no issues so I suspect it's an incompatibility issue with either Android 6.0.1 or the most recent security patch. If it's confirmed I'm going to need to figure out how to roll back to a version that still works...
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
I have the latest software and it works fine with comcast for me.
[1] said:
I have the latest software and it works fine with comcast for me.
Click to expand...
Click to collapse
mine is also working fine. HDHR-Prime. I would just make sure that whatever app youre using for it, and the FW on the box are all up to date, and that the CC is pushed in completely. beyond that most issues ive had have been fixed by unplugging it, waiting, and plugging it back in.
I have HDHR Prime with comcast cable card plugged in and HDHomerun android app installed from google store on the Nexus Player. Video is good, audio is only stereo. But the stream - both video and audio freeze - frequently. I then have to switch over to the another channel, select that channel and then move back to the original channel. Not sure whether my router - running 5Ghz and wireless N - is the culprit and not able to handle the HDHR video streams. All other apps, Netflix, Sling TV etc never have any issues streaming.
Hindolam said:
I have HDHR Prime with comcast cable card plugged in and HDHomerun android app installed from google store on the Nexus Player. Video is good, audio is only stereo. But the stream - both video and audio freeze - frequently. I then have to switch over to the another channel, select that channel and then move back to the original channel. Not sure whether my router - running 5Ghz and wireless N - is the culprit and not able to handle the HDHR video streams. All other apps, Netflix, Sling TV etc never have any issues streaming.
Click to expand...
Click to collapse
it's because it's wireless. I have 3 NPs...2 are hardwired and rarely have issues. one is wifi (5ghz) and even though it's about 15 feet from the router freezes and stutters frequently.
Thank you all. The problem was with the WiFi connection. I still don't know what was wrong exactly, but after I renamed the wifi and connected all devices over the 5ghz band they are all working now. It just seemed odd that I could connect to Lollipop and windows devices but not to marshmallow. But that was just a coincidence.
Sent from my SM-P600 using XDA Premium HD app
Hindolam said:
I have HDHR Prime with comcast cable card plugged in and HDHomerun android app installed from google store on the Nexus Player. Video is good, audio is only stereo. But the stream - both video and audio freeze - frequently. I then have to switch over to the another channel, select that channel and then move back to the original channel. Not sure whether my router - running 5Ghz and wireless N - is the culprit and not able to handle the HDHR video streams. All other apps, Netflix, Sling TV etc never have any issues streaming.
Click to expand...
Click to collapse
I came across this same issue, I'm not running my nexus tv over wireless, I've added an OTG usb cable, a powered usb switch, and a usb to 10/100/1000 lan adapter and noticed i was having this problem after I upgraded the firmware on my Linksys Wrt1200ac router from stock to ddwrt, I then remembered part of the setup for the hdhr prime was to make sure your router isn't filtering multicast (will be in your firewall settings). Once i changed that setting and rebooted my router I no longer had the freeze and fail symptoms.
rigbyrobot said:
I came across this same issue, I'm not running my nexus tv over wireless, I've added an OTG usb cable, a powered usb switch, and a usb to 10/100/1000 lan adapter and noticed i was having this problem after I upgraded the firmware on my Linksys Wrt1200ac router from stock to ddwrt, I then remembered part of the setup for the hdhr prime was to make sure your router isn't filtering multicast (will be in your firewall settings). Once i changed that setting and rebooted my router I no longer had the freeze and fail symptoms.
Click to expand...
Click to collapse
Thanks for your answere. If I go to security/firewall page. I do see "Multicast" is being filtered. But the setting is appearing under WAN. I disabled so that Multicast is not being filtered. No luck. The HDHR view app still shows all channels. Plays very well both audio/video for a period of time - no stuttering or glitch - sometimes few minutes and sometimes more than an hour, without any hitch. But then video freezes - no audio as well. I have to navigate to a different tv channel and select the same channel again. It works then.
Hindolam said:
Thanks for your answere. If I go to security/firewall page. I do see "Multicast" is being filtered. But the setting is appearing under WAN. I disabled so that Multicast is not being filtered. No luck. The HDHR view app still shows all channels. Plays very well both audio/video for a period of time - no stuttering or glitch - sometimes few minutes and sometimes more than an hour, without any hitch. But then video freezes - no audio as well. I have to navigate to a different tv channel and select the same channel again. It works then.
Click to expand...
Click to collapse
I replaced my router - Linksys WRT610NV1 (300Mbps Wireless N) with Trendnet TEW-811DRU AC1200. While there are lot negative reviews for the TEW-811DRU, it has worked very nicely for my needs. No more freezes. The router I believe can get pretty hot. Since it is winter time, it may not matter much. I will wait till summer to see whether there are issue because of that. For the price I paid < $20 it is a great buy even if it works for a very short time.