Hi! Could you save my defy+ pleaseeeeee. My problem is that I have JB 4.1 on my defy+, but the batttery ends very fast, so I decided to flash DEFYPLUS_U3_4.5.1-134_DFP-231_CN.sbf back to the phone. Now, All I have is the Red logo "M" on startup menu. Can you give me an advice. Thank you very much.:crying:
If you can enter in recovery, reflash the rom or make a full wipe
Sent from my Galaxy Nexus using xda premium
I've tried it, but did not help, any idea else please
Do a hard reset on your phone
Hold volume down and power button, till the screen turns on black (but its on)
Press Volume up and volume down at the same time and the menu will appear.
Select clear storage and confirm.
It happenned to me and i fixed like this
hello there..i bought my nexus 4 yesterday..its AWESOME!!..so i wanted to start flashing some custom roms etc..so i wanted to boot into stock recovery and see how the new one looks like..when i tried booting into it..i get a RED triangle with the android sleeping..can someone help me..wuold be highly appreciated..and thanks in advance..
sumeetp said:
hello there..i bought my nexus 4 yesterday..its AWESOME!!..so i wanted to start flashing some custom roms etc..so i wanted to boot into stock recovery and see how the new one looks like..when i tried booting into it..i get a RED triangle with the android sleeping..can someone help me..wuold be highly appreciated..and thanks in advance..
Click to expand...
Click to collapse
I'm new to nexus family too and had a lot of problems with it. (Never have problems but this recovery cost me a lot of time).
The solution is:
When you are EXACTLY at the red exclamation mark screen.
1) Press and hold POWER
2) Press volume UP.
That should show the options in less than 2 seconds.
Sent from my Nexus 4 using Tapatalk 2
thesebastian said:
I'm new to nexus family too and had a lot of problems with it. (Never have problems but this recovery cost me a lot of time).
The solution is:
When you are EXACTLY at the red exclamation mark screen.
1) Press and hold POWER
2) Press volume UP.
That should show the options in less than 2 seconds.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
thanx mate..worked like a charm
I am experiencing the same "no command" issue, already tried the volume up + power and nothing happens, if I flash CWM touch 6.0.3.1 everything works but I can't go back to stock recovery no matter what, any advise?
Already flashed stock recovery using Wugfresh's Nexus Root toolkit but the "no command" problem persists.
Thank you.
lsv-1 said:
I am experiencing the same "no command" issue, already tried the volume up + power and nothing happens, if I flash CWM touch 6.0.3.1 everything works but I can't go back to stock recovery no matter what, any advise?
Already flashed stock recovery using Wugfresh's Nexus Root toolkit but the "no command" problem persists.
Thank you.
Click to expand...
Click to collapse
it's power then volume up. you're doing it the wrong way. you need to press power first and while pressing on that you press volume up
thephantom said:
it's power then volume up. you're doing it the wrong way. you need to press power first and while pressing on that you press volume up
Click to expand...
Click to collapse
Yeap, same thing, I press and hold the power and then I press the volume up, nothing happens. I even formatted the phone completely using the 4.2.2 image from google, nothing, the no command error keeps coming up, the only way to have a recovery is flashing CWM touch.
---------- Post added at 10:37 AM ---------- Previous post was at 09:44 AM ----------
I've got my N4 maybe a month ago, I installed the 4.2.2 OTA as soon as I got it, the I proceeded to unlock it and root it, one day someone recommended to clear the cache of the phone using the stock recovery (which I thought I had / to fix another problem that I was having) I went to fastboot and tried to access recovery, BOOM, just an android laying down with a red exclamation mark, no "no command" error at all. I downloaded CWM touch and flashed it using Nexus Root Toolkit, that worked fine, but I didn't want a custom recovery and also I needed to fix a 3G latency problem that I was having, after some reading I saw that someone recommended a full flash using the stock google image.
A couple of days I proceeded to flash the factory image, I installed it, after that I did a factory reset from android itself. After doing all that I wanted to clear the cache with the stock recovery just in case, BOOM, an an android laying down with a red exclamation mark and this time with a "no command" error. Tried the trick of holding the power and pressing the volume up, NOTHING HAPPENS!
Right now I am using CWM Touch.
Any suggestion?
Thank you.
No real solution??? Sad...
---------- Post added at 02:13 PM ---------- Previous post was at 02:09 PM ----------
thephantom said:
it's power then volume up. you're doing it the wrong way. you need to press power first and while pressing on that you press volume up
Click to expand...
Click to collapse
Nothing, this answer is unhelpful
I have this issue as well. I tried to "unroot" my N4 (and Im a noob at this), and I think I did something wrong because when I access recovery mode from the bootloader I see the "dead android" but no matter what I do I dont see the control/menu. I tried:
- holding all buttons at the same time
- holding the power button and the down button (in sequence)
- holding the power button and the up button (in sequence)
So now I can not boot my Nexus, I can not wipe my Nexus and I can not access it from the PC. I was running 4.3 and I used the "How to Unroot Nexus 4 to Stock 4.2 Jelly Bean on Windows!" youtube guide ( I am not allowed to post links) to unroot my device (nexus 4), where I fail at 8:45, I simply dont see that menu popping up. Instead, my Nexus shuts down or reboots.
Please help
Is there no fix for this?
I decided to go back to stock to get 4.3. I flashed 4.2.2 using the Nexus toolkit and then got 4.3 via an OTA after this I rooted my phone. As the OTA worked I would imagine that the stock recovery was working. When I tried to install the latest OTA I got the no command issue. I can flash cwm recovery no problem. But when I try to flash stock recovery either via a toolkit or via fastboot command it does not work - no command. And holding in power and then volume up doe nothing. Any advice? I suppoe I cando a full wipe flash the stock 4.3 image and see if this helps. Has anyone had any success fixing this problem?
I have the same issue.
Even when trying to get to stock recovery through Nexus Root Toolkit gets me a NO COMMAND screen.
It seems like the recovery is not there.
Still looking for an answer - any help?
finbaar said:
Is there no fix for this?
I decided to go back to stock to get 4.3. I flashed 4.2.2 using the Nexus toolkit and then got 4.3 via an OTA after this I rooted my phone. As the OTA worked I would imagine that the stock recovery was working. When I tried to install the latest OTA I got the no command issue. I can flash cwm recovery no problem. But when I try to flash stock recovery either via a toolkit or via fastboot command it does not work - no command. And holding in power and then volume up doe nothing. Any advice? I suppoe I cando a full wipe flash the stock 4.3 image and see if this helps. Has anyone had any success fixing this problem?
Click to expand...
Click to collapse
When you get the no command prompt do the following.
Press and hold the power button followed by pressing and holding the volume up button. Release only the volume up button after 2 seconds and you will be in recovery.
Sent from my Nexus 4 using XDA Premium 4 mobile app
See this
http://forum.xda-developers.com/showpost.php?p=44388152&postcount=13
jangietka said:
I have the same issue.
Even when trying to get to stock recovery through Nexus Root Toolkit gets me a NO COMMAND screen.
It seems like the recovery is not there.
Still looking for an answer - any help?
Click to expand...
Click to collapse
Seems that you have the stock recovery installed (that Android laying on its back with a red triangle is the stock recovery).
If I'm not missunderstanding your issue, it shouldn't really be an issue but it's just like how it should be.
Getting No Command while entering Recovery Mode in my Nexus 4
Hi All,
I am also facing the same problem, I got kitkat update, the update (239 MB) downloaded but while installing, it shows No Command with Red Triangle. My Device is rooted.
Please help me..
Regards,
Ajay
got the same problem
i had the no command problem and then i watched videos how to get recovery mod
i installed teamwin recovery mod and i had NO root for android 4.4.3
at nexus 4 toolkit thare is still no version of 4.4.3
how do i fix it?
how do i root it without flashing image?
thanks
~oren
finbaar said:
When you get the no command prompt do the following.
Press and hold the power button followed by pressing and holding the volume up button. Release only the volume up button after 2 seconds and you will be in recovery.
Sent from my Nexus 4 using XDA Premium 4 mobile app
See this
http://forum.xda-developers.com/showpost.php?p=44388152&postcount=13
Click to expand...
Click to collapse
This worked! Thanks!
The trick is release only volume up button.
Yes, but the OTA update still does not install with this method.
"No Command" issue solved for Zuum 9330
I want to thank every one of you guys. I had same issue with my phablet. By reading your comments I got ideas to try some key combinations, and factory reset my phone. Here is what I did:
1) Power down the phone
2) Press and hold "volume up", then Press and hold "power" button until Android logo with the message "no command" shows up
3) Press and hold "volume down", then Press "back" button then release "back" button and the menu will show up. Then release "volume down".
4) use "volume up" or "volume down" to navigate menu
5) to execute selection, use "home" button
I hope it helps someone.
If so, please tell me.
Total first timer, flash to stock as had messed up sd card partition trying to flash custom ROM, really worried when couldn't access recovery after stock flash. Thank you thank you thank you, this totally worked!!!
thank you a lot. saved my phone. i thought i will through away the nexus 4 but the combination of no command power button and volume up did well
Hope this helps, you press and release volume up! worked perfectly
Performing a factory reset may take some time, so make sure that you plug your device into a power source before you start. If your phone becomes unresponsive at any point during these steps, you can restart it by holding down the Power button for several seconds.
If your phone is on, turn it off.
Press and hold the Volume Down button and the Power button at the same time until the device turns on. You'll see the word "Start" with an arrow around it.
Press the Volume Down button twice to highlight "Recovery".
Press the Power button to restart into Recovery mode. You'll see an image of an Android robot with a red exclamation mark and the words "No command".
While holding down the Power button, press and release the Volume Up button once.
Press the Volume Down button twice to highlight "wipe data/factory reset" and press the Power button to select it.
Press the Volume Down button seven times to highlight "Yes - erase all user data" and press the Power button to select it.
After the reset is complete, press the Power button to select the option to reboot your device.
When you've finished, follow these steps to restore your data.
after rooted with custom recovery ( CWM or TWRP )
~~~~~
been searching the web and seen people reporting that it's a bug with JB and that you have to use USB cable attached to PC in order to cold boot into bootloader with hardware buttons... or that holding both volume button as you power on does NOT work...etc ... so as far as I can read... people are relying on tricks or at the mercy of having to boot from inside android ( fully boot )...
what if your system does NOT boot and you need to get into bootloader and recovery ??
well... I found out how !! :laugh:
/ with the device OFF
/ hold down "POWER BUTTON" for 3 seconds and let go..
/ as soon as you let go of the "POWER BUTTON"... HOLD IN THE VOLUME DOWN BUTTON... and you will automatically be in bootloader mode
/ Select with volume rocker & confirm with power button
I get stuck on the splash screen when I select recovery.
Sent from my Nexus 4 using xda premium
Hey, I just recently installed twrp, and I know this a common question, but for the life of me, I can't access recovery from back buttons at all, hold power and down, get lg logo release, press again to recovery? Had to get quick reboot, but worried when flashing new Rom or mods won't be able to get into recovery for a fix if something goes Bork...I'll keep trying
Sent from my LG-LS980 using XDA Free mobile app
dougthemug said:
Hey, I just recently installed twrp, and I know this a common question, but for the life of me, I can't access recovery from back buttons at all, hold power and down, get lg logo release, press again to recovery? Had to get quick reboot, but worried when flashing new Rom or mods won't be able to get into recovery for a fix if something goes Bork...I'll keep trying
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
after the lg logo try holding volume up + volume down.
Nope, no go either...
Sent from my LG-LS980 using XDA Free mobile app
When the phone is off, press and hold volume up and power button. Then you get into recovery...
Gesendet von meinem B1-710 mit Tapatalk
@dougthemug
From a power off state, hold power and volume down. When you see the LG logo, let go and quickly HOLD power and volume down again. Keep holding and after a few seconds you should see a white screen that says something about factory reset blah blah. Tap the power button 3 times and it will take you to TWRP. If you're ever stuck in a bootloop, long press the power button. When you feel a vibration, immediately go through the same steps to get back into recovery. Does take some practice so you may wanna try it when you have some spare time to get the hang of it.
you can use xposed module called Advanced power menu - it gives you an option to reboot into recovery using power button from the system shut down/power off menu...
before i found that module - i used "switch pro widget" which has a shut down/reboot icon included which worked as well...
OK, This is weird, it worked by holding power and volume down together for about 5 seconds, it popped up the same way, but appreciate the help
Sent from my LG-LS980 using XDA Free mobile app
I just have installed a Nougat based ROM on my old LG G2, the installation went fine. The system boots up normally but after a few seconds in the first setup screen it just keeps rebooting.
Now I want to wipe my phone and install another ROM but I can't get into the recovery. For some reason the hardware buttons method isn't working. I push the volume down button + power buttons until the LG logo appears, then release and push the buttons again. It just skips to the system boot.
Also the ROM doesn't come with advanced reboot menu enabled, it means the power menu just shows me the power off and standard reboot options.
Is there any other way I can get into the recovery?
to get into recovery via the button combination you have to shut off the device completely...
to shut it off completely - press the power button longer than 10 seconds, LG logo will appear for a second > don't release the power button until the logo dissapears...
now with the device powered off you can try button combinations... if it fails, turn the device completely off again and try again with another button combination
if you can boot into the rom - you can install some of the apps from the play store which give you an option to reboot into the recovery directly from the rom itself... there are several of them...
btw some of the custom roms have that advanced reboot option turned off by default - see deeper into some settings, maybe you have to to turn it on manually (it's usually in the "developer options" or in dedicated rom additional settings/customizations menu)