To start, I'm using the Verizon VS980.
While trying to get a custom recovery working on the latest OTA version, VS98026A, everything I tried seemed to fail. I used twrp manager to install the latest twrp into my recovery, but at the step where it reboots into recovery I got sent to fastboot instead. No problem, just try again right? Same problem. I did a little digging and it seems the 26A update locked down the bootloader tight, can't even get loki working, but flashing the 12B aboot was supposed to be a workaround. So I flash the 12B aboot through fastboot. Oops. I must have missed a step SOMEWHERE, even though I'm fairly experienced and careful, because now it won't boot.
At this point I'm thinking I'll just bite the bullet and restore it. Nope. Recovery mode is dead now, as is fastboot. I try to connect download mode, and it appears to work (download mode shows on the phone) but the computer doesn't recognize the phone even exists.
I'm a week away from my next paycheck to find a phone to pull the guts out of, and I have a full TWRP backup of all partitions, including EFS. What are my options, if any? Help... please?
(I also read - too late - that freegee is supposed to automatically downgrade bootloader)
No one has any ideas on fixing it?
I'll settle for ideas that will make it impossible to tell if it's rooted, like make it so it won't turn on or at least remove that ugly warranty-breaking "rooted" flag on the recovery warning. I'll just take it in for warranty claim after.
Anyone have any ideas? Maybe wiring the USB to short it out?
I seriously just need to break it, and soon because my employer can't contact me.
As a revelation that may fix/break the phone, I got the computer to recognize the phone. It came up as a bunch of unformatted drives, and one that was readable that contained an "image" folder.
since your computer can detect it now, why dont u try flash kdz using LGFlashtool ?
zekurosu said:
since your computer can detect it now, why dont u try flash kdz using LGFlashtool ?
Click to expand...
Click to collapse
Thanks for the suggestion, but it wouldn't work. It was detecting it as qhusb_bulk, not download mode.
I followed the steps here, http://forum.xda-developers.com/showthread.php?t=2582142, and partway through dd'ing the aboot my phone shut off. I guess the battery died. Now it won't turn on again AT ALL. Just what I wanted, kind of. At least now I can replace it under warranty.
Related
I'll be as descriptive as possible.
I must have did a bad flash with CWM, so I tried to reflash with CWM, TWRP, and even the OEM recovery. When attempting to boot to recovery, the screen goes blank. My pc attempts to connect every drive letter I've got when I plug in the usb. Among which, I can access an image folder on the device. Can't figure out how a bad recovery flash does this, but I can't find a fix for the life of me. Phone works as it should. My problem is anything involving recovery will give me a black screen, so factory wipe will not work.
Any ideas would be well appreciated.
Thanks
I tried following this guide: http://forum.xda-developers.com/showthread.php?t=2471370
The program get's stuck at analyzing device and doesn't flash or download anything. It would be nice if I can perform at least a factory reset in case something wants to blow up in my face. If anyone has some ideas (ridiculous or not), feel free to let me know.
slicknessessity said:
I'll be as descriptive as possible.
I must have did a bad flash with CWM, so I tried to reflash with CWM, TWRP, and even the OEM recovery. When attempting to boot to recovery, the screen goes blank. My pc attempts to connect every drive letter I've got when I plug in the usb. Among which, I can access an image folder on the device. Can't figure out how a bad recovery flash does this, but I can't find a fix for the life of me. Phone works as it should. My problem is anything involving recovery will give me a black screen, so factory wipe will not work.
Any ideas would be well appreciated.
Thanks
Click to expand...
Click to collapse
Hey man you could try just using Flashify to flash a recovery...its a app...then boot to recovery
I tried using that method. It gives me the same thing. Maybe somewhere in the recovery location (or associated locations) seem to may have gotten damaged somehow during the bad flash? Flashing the phone completely I'm sure would do the trick. I came from the droid 4, so sbf/fastboot flash would solve all my problems. Searching around landed me to a kdz, which seemed to be an equivalent, but isn't working or maybe I'm doing something wrong? Any advice on this would be greatly appreciated.
I went and did a full flash using this method: http://forum.xda-developers.com/showthread.php?t=2448960. Since I couldn't find a recovery fix per se, I decided to flash the whole thing and start fresh (oh well).
It downgraded to 11A in the process, so the same can probably be said for 10B for compatible custom builds.
I figured with the amount of bricked LS980s with Justins rom I've been seeing at my shop I might as well make some sort of tutorial to help some people out. Searching doesn't bring up too many threads but there are a couple and hopefully a few of the guys in those chime in. My goal is to make this visible and save many of you hours of trouble. Many thanks to Justinswidebody for building the rom. I won't post the link as most can use the search to find it just fine.
Why does the LS980 brick with Justins rom?
It updates.
I think the majority of people flash the rom and forget to take the necessary steps to prevent an update and when it does it will try to reboot into recovery and wipe the system resulting in a soft brick. Most of the time TWRP will remain, which is good, but reflashing the rom will do no good.
Right after this happens what do I do?
Imeadiately plug in you usb and adb push the stock ZVA rom onto the sdcard
use this command:
adb push nameoffile.zip /sdcard
It will take a while.
Once it finishes you need to wipe everything but internal and flash. Once done, power off and boot into download mode.
Prepare LG Flasher and correct TOT file with DLL. I may post a link later.
In my personal experience with installing justins rom it's best to start fresh with ZV7, trust me you will have less headaches. Once it finishes you're ready to redo the whole thing.
I dicked around with the phone and now I can't get into recovery?!
You have to have recovery on there.
If you can't get into download mode then your journey ends here, not sure there is a fix for that, however, you probably already have it in DL mode and getting a fail "wrong DLL" or some ****. Your phone now thinks it's a T-mobile D801. Forget the sprint files, you're gonna flash the tmobile files just to get it to boot. I actually had a customer bring me the phone and managed to flash the right combo to get it to boot but he didn't know what he did, I'll have to find them.
Now, once booted up you'll notice wifi and data will not work along with keyboard and other things thus making it impossible to download flashify and reflash recovery. The phone, in some cases, will only stay booted for 20 seconds and then reboot over and over. It's like this phone is actively tying to make your life difficult. Relax, and let the adb drivers install. Test it by opening a command prompt and write: cd/
/adb
/adb devices
Allow the rsa key. You won't have time to transfer the stock sprint ota file so we need to transfer it in recovery.
Download the simpletool flasher by OptimusRS, this will flash recovery to your phone and remember to choose d801 not ls980. Reboot into recovery. Once the adb drivers have installed you're going to adb push the stock zip back onto the sdcard like you did before. Wipe everything and flash, then power off. Once you boot into download mode it should recognize the phone as an LS980 once again and you are free to flash the correct tot and dll files.
Congrats! You did it!
How do I prevent this from happening in the future?
I've been fighting with this for a while and I think finally know how to be 100% successful in turning off the OTA, if anyone has something to add please do
Go into the app manager and find google services framework and uncheck or disable or both
Use a file manager to go up to CACHE and delete the update that will most likely be hiding in there
Go up to system/app and rename any service that looks like it would provide an update- LDdownload provider is one. I wish I had a list of all of them but I really don't know what the exact app is.
Special thanks to all the guys contributing in these threads:
http://forum.xda-developers.com/showthread.php?t=2641831
http://forum.xda-developers.com/showthread.php?t=2682926
Exactly at this point
I am exactly at this point, but not turned on usb debugging, so i don't have adb access to the phone. When I try to flash the phone with ls980 TOT it says, the device is D801 and if I try D801 KDZ file, it shows an error message "previousLoad()". I have both download mode and Recovery mode. I have tried sideloading rom on recovery, but I get an error like "E: footer invalid, E: signature invalid"
What can I do to unbrick it. I am trying desperately for the past few weeks.
Anoop S S said:
I am exactly at this point, but not turned on usb debugging, so i don't have adb access to the phone. When I try to flash the phone with ls980 TOT it says, the device is D801 and if I try D801 KDZ file, it shows an error message "previousLoad()". I have both download mode and Recovery mode. I have tried sideloading rom on recovery, but I get an error like "E: footer invalid, E: signature invalid"
What can I do to unbrick it. I am trying desperately for the past few weeks.
Click to expand...
Click to collapse
Honestly, this kind of brick is a *****. I had a customer bring in one that he actually used Flashtool to put on the original t-mobile dll and tot file, and adb does not work in order to get recovery on. Sucks.
Not many people have experience with this stuff and flashtool is a pain when this happens
2strokenut said:
Honestly, this kind of brick is a *****. I had a customer bring in one that he actually used Flashtool to put on the original t-mobile dll and tot file, and adb does not work in order to get recovery on. Sucks.
Not many people have experience with this stuff and flashtool is a pain when this happens
Click to expand...
Click to collapse
Lol I'm having this issue with one of my customers and it fails. I unlock these things and pass them on but I ALWAYS disable the Google Play Services firmware update in order to avoid this and clearly warn them NOT to factory reset.
This one guy got his elsewhere and the guy gave him no warning on the update. So he contacted me and his is worse than my first experience with the T-Mobile rom OTA brick. Seems like his seller didn't use AutoRec which is more reliable. Basically, mine still had TWRP, this one does not. Mine would boot into the LG logo with those wonderful white words on the top left. His is completely discharged, NO TWRP or anything. Boots the LG logo breifly and basically kicks it directly into Firmware Update mode.
So basically I have to restore the D802? I used the T-Mobile 4.4.2 kitkat based rom on mine, not sure what this had, but I know it was a T-Mobile rom as the customer described. Question is, how do I install a custom recovery then? I know that mine would get detected as a T-Mobile, but since I had the luck of having TWRP, I simply wiped everything, and it would then flash via flashtool as a normal LS980.
Any ideas on how I get TWRP on it? Should I experiment using the AutoRec for the T-Mobile variant?
Hello my fellow XDA Members. I am stuck in a tight spot and after reading and re-reading some things the situation doesn't look very promising. I hope this is the moment that Karma shows up and I can get some help on this. Here it goes.
Specs - LG G2 D801 Variant > TWRP V2.8.3.1 > NO OS Currently
I was running Cloudy G3 Rom smoothly and got bored and decided to flash that new rom that is a 5.0 Rom all variants. Did the usual back ups and flashed it. Something happened when I flashed the rom. It went through the Aroma installer and then said "successful" but stuck in a bootloop. I tried it again and nothing happened. Then I tried to wipe everything again and started getting an E: Cannot mount (data or system I forget which as that error went away after I completely formatted data, wiped everything and reflashed Cloudy Stock. )
> Cloudy stock bootlooped and nothing is happening in TWRP. I Am using the USB OTG method of getting files on the phone and getting it charged but anytime I try to do anything (flash a rom, an older version of TWRP) it just immediately restarts TWRP and thats that. I have No OS at all.
> I tried to use one of the methods to get into download mode and flash a stock KDZ but the phone acts like it is going into DL mode (shows the little blue transition screen) but never gets into the ACTUAL download mode where the PC or flash tool can recognize it.
So in a nutshell > No OS > I can get into TWRP but it does nothing > No Download Mode > Don't want a new phone > Don't want to take it apart and try to short circuit anything if possible. LOL.
I am totally stuck here. I am done alot of work and even helped friends and family out with their devices over the years. I am just not sure if I need to consider it a done deal and get a new phone or maybe one of you guys know of something easy and obvious (please let it be the latter) I am missing. Thanks for any help you can offer. I Will be standing by.
Have you tried to reflash bootloader? If not, do that and reflash cloudy right away
wisefreakz said:
Have you tried to reflash bootloader? If not, do that and reflash cloudy right away
Click to expand...
Click to collapse
I haven't thought about flashing a bootloader. How would I flash the bootloader if I can not the phone into either DL mode and or TWRP doesn't do anything either? Is a bootloader file just a flashable file like any other .zip file?
jcnbama said:
I haven't thought about flashing a bootloader. How would I flash the bootloader if I can not the phone into either DL mode and or TWRP doesn't do anything either? Is a bootloader file just a flashable file like any other .zip file?
Click to expand...
Click to collapse
@jcnbama
Have you tried this or this?
euphoria360 said:
@jcnbama
Have you tried this or this?
Click to expand...
Click to collapse
The first one I can not do as I do not have any knowledge at all of Ubuntu, Linux, or any of that. It would take forever to get a working knowledge of that software in order to get things going again. I would probably just have to either take it to a cellphone repair shop or get another phone before I could do the first link.
I have not tried the second one but it is a viable option. I was looking at it online and trying to talk myself down from having to do that. I would reallllllllly rather not have to take my phone apart if I can keep from so that's kind of what this post is all about. Just trying to see if anyone knows of ANYTHING else before I go taking apart my phone.
Can you describe more about "twrp doesnt do anything"?
Does twrp boot up?
Can u see/wipe partitions?
Can u install any rom in twrp? Does it finish?
euphoria360 said:
Can you describe more about "twrp doesnt do anything"?
Does twrp boot up?
Can u see/wipe partitions?
Can u install any rom in twrp? Does it finish?
Click to expand...
Click to collapse
TWRP boots and I can go into wipe, advanced wipe, and format data and it says it's successful. I can use file manager and move items back and forth from USB OTG. If I try to flash anything it just reboots TWRP immediately so I can't install any .zip files at all.
My guess is that your bootloader is damaged.
The only option i can see for you is that Ubuntu thing i shared with you. So, lets stop acting lazy and do what needs to be done. Dont scare since there is nothing to loose. LG G2 is unbrikable
Booting up ubuntu or any other linux os is so easy. And there is nothing much to learn. Trust me.
Go to ubuntu website and download their newest iso file. Burn it on dvd and boot it up. You dont have to install it, just choose "live mode" and it boots up. Just like that. Then yiu can proceed with tutorial mentioned above and it shouldnt take more than an hour from you. Its all typing some commands in terminal (remember CMD in windows!).
Just make sure to download the files mentioned in that tutorial before proceeding.
euphoria360 said:
My guess is that your bootloader is damaged.
The only option i can see for you is that Ubuntu thing i shared with you. So, lets stop acting lazy and do what needs to be done. Dont scare since there is nothing to loose. LG G2 is unbrikable
Booting up ubuntu or any other linux os is so easy. And there is nothing much to learn. Trust me.
Go to ubuntu website and download their newest iso file. Burn it on dvd and boot it up. You dont have to install it, just choose "live mode" and it boots up. Just like that. Then yiu can proceed with tutorial mentioned above and it shouldnt take more than an hour from you. Its all typing some commands in terminal (remember CMD in windows!).
Just make sure to download the files mentioned in that tutorial before proceeding.
Click to expand...
Click to collapse
First of all calling people lazy is not nice. I'm not lazy I am trying to play it safe. I wouldn't want to brick it to the point to where I don't even have recovery and it can not even be charged any longer. I have Ubuntu on my desktop upstairs. I have used it a little. It's not that I am completely ignorant to Ubuntu I am just a total novice. Also the issue described in that post doesn't exactly match my situation. I am not in a black screen. It's more like a bootloop that I can not get out of because TWRP is not doing what it needs to do and I can not flash TWRP a ROM or get into DL mode at all. Also that post says,
"VERY IMPORTANT!!!!!!! You must use the img files that correspond to the ROM you have installed before getting the problem to avoid breaking your phone."
I don't have a rom on my phone soooo...
You didn't answer my question well. If on TWRP you can finish installing rom without any error, and you keep coming to twrp after restarts, that's another situation. Try this:
http://forum.xda-developers.com/showthread.php?t=2451696
But if you cant even finish install in twrp (twrp gives you errors or just restarts before giving you "successful", either you have problem in rom you try to flash or you need to build everything up from start.
That lazy thing was for encouraging you to do it.
And you cant brick your device. There is always a way on G2.
For img files: find them from last stock rom that was working on your phone.
Deleted
I have rooted many phones before without an issue, and during the root process for this phone, everything was going great, I flashed SuperSU zip in TWRP and rebooted, since it was the first boot I expected a decently long wait, after about 25 minutes I followed the guide's instructions for Verizon since it did say some Verizon users were experiencing long first boot times. I took the battery out like it said, put it back in, then proceeded to fastboot boot2.img, like the guide said. After letting it sit for an hour this time, I got the idea that something was obviously wrong. After multiple attempts with no success I tried to fix it myself. So far I have learned that on the fastboot screen it says my bootloader is locked again, even after unlocking it. I have tried flashing TWRP as a recovery, just to at least have a recovery boot, that does not work either unfortunately. So as of right now, all I have is a v20 that has no OS, a locked bootloader, no way of booting recovery, I can fastboot with no ADB, and its virtually a paperweight. If anyone has a solution to at least get back to Stock, I would greatly appreciate it! Thanks!
First off. It will say: Bootloader Unlocked: No
Thats normal. 2nd. you are not bricked. You have TWRP installed. You just need to redo some steps.
PM me. and I will help you.
Did you get it fixed?
frome901 said:
Did you get it fixed?
Click to expand...
Click to collapse
He has not responded to my pm
What roms can we use with dirty santa root?
me2151 said:
First off. It will say: Bootloader Unlocked: No
Thats normal. 2nd. you are not bricked. You have TWRP installed. You just need to redo some steps.
PM me. and I will help you.
Click to expand...
Click to collapse
Bricked 2 LG V20s this way any help would be appreciated lol what steps do I need to redo...
TheDantee said:
Bricked 2 LG V20s this way any help would be appreciated lol what steps do I need to redo...
Click to expand...
Click to collapse
In his case we needed to redo from step 3.
I managed to un-brick mines after returning sadly from the Sprint store.
First, get to the boot loader screen and try running thru the steps again, especially step 3. You need to make sure you have TWRP.
Use this link to make sure you can get into the different modes (Download mode, fastboot, etc) http://www.hardreset.info/devices/lg/lg-v20/
Once you can get TWRP to show up,then you are good. In the mean time I downloaded "LS997-deODEXd-signed"
When I got into TWRP, I transferred the file to my phone. Rebooted from TWRP back into TWRP and flashed the ROM.
During my reboots, I do get a message saying my phone is corrupt, blah blahblah, but I just wait a few seconds and it will boot up.
Hope this helps.
I had managed to brick mines only 3 hours after upgrading from my Note 4. It took me from 9pm to almost 2am to get it back up again. I can live with the message about my phone being unbootable until someone comes up with a work thru.
Bricked T-Mobile v20
I have rooted many phones before without an issue, and during the root process for this phone, everything was going great, I flashed SuperSU zip in TWRP and rebooted, since it was flash a new rom on it then i get boot loop with TWRP. so i decide to OEM LOCK again after that everything was stuck on my phone just boot loop with LG so any solutions please help me...... THx u for help me.
Kinda nerve wrecking to read about all these "bricked" phones popping up after trying this method lol.. Perhaps I'll just wait until a more tried and true way comes out...
Dirty Santa root is not for the average user who has a couple of experience in rooting.
You have to at least have background on Hard bricking phones to fully understand what you are getting yourself into
For anyone that isnt on sprint that has "bricked" their phone. There are kdz's that will allow you to reflash back to 'stock". Someone had an issue with the kdz, but it was an easy fix. If you failed the process, it can be restored. Just if it doesnt want to boot, just lock and unlock the bootloader...
If your phone doesnt have a kdz, I know TeamDev is working on a custom kdz for such phones. Don't bug him if it isn't finished as I type this.
Anyone that can't get into TWRP, or has failed the process. Either start back at step 3, or if you have TWRP installed but can't get to it, the manual way to get into TWRP is a pain.
Keep your back cover off and hold the volume down button for ease. Now press the power button and as soon as you see an LG logo, let go and repress the power button. Its tricky.... If you get the corrupted screen, pop your battery out and put it back in quick and repress volume down and power. Usually if Im quick enough the first LG logo will hang a lot longer than usual and that gives me time to enter TWRP. A factory reset screen will pop up. Hit Yes twice.
Please help urgent
lcovel said:
I managed to un-brick mines after returning sadly from the Sprint store.
First, get to the boot loader screen and try running thru the steps again, especially step 3. You need to make sure you have TWRP.
Use this link to make sure you can get into the different modes (Download mode, fastboot, etc)
Once you can get TWRP to show up,then you are good. In the mean time I downloaded "LS997-deODEXd-signed"
When I got into TWRP, I transferred the file to my phone. Rebooted from TWRP back into TWRP and flashed the ROM.
During my reboots, I do get a message saying my phone is corrupt, blah blahblah, but I just wait a few seconds and it will boot up.
Hope this helps.
I had managed to brick mines only 3 hours after upgrading from my Note 4. It took me from 9pm to almost 2am to get it back up again. I can live with the message about my phone being unbootable until someone comes up with a work thru.
Click to expand...
Click to collapse
Please can u help ke unbrick mine i bought this mobile in my country its expensive and has no support. I have tried all tools but still getting the error model unknown please help sir
Jaistah said:
Dirty Santa root is not for the average user who has a couple of experience in rooting.
You have to at least have background on Hard bricking phones to fully understand what you are getting yourself into
Click to expand...
Click to collapse
What does that mean? Not for the average user who has a couple of experiences in rooting.
I've only rooted 2 phones, this is my 3rd (maybe 4th). I am on Sprint. Instructions worked fine for me. I did have one hiccup, but it was my fault, and I was able to root just fine. I've been running for a few months now.
I have not flashed any custom ROM yet, I'm going to wait for the next major version of Android to come out. The only mods I've done so far are Titanium Backup install so I can remove Sprint crap.
yuppicide said:
What does that mean? Not for the average user who has a couple of experiences in rooting.
I've only rooted 2 phones, this is my 3rd (maybe 4th). I am on Sprint. Instructions worked fine for me. I did have one hiccup, but it was my fault, and I was able to root just fine. I've been running for a few months now.
I have not flashed any custom ROM yet, I'm going to wait for the next major version of Android to come out. The only mods I've done so far are Titanium Backup install so I can remove Sprint crap.
Click to expand...
Click to collapse
it means dirty santa root got a high posibility rate of bricking a device compared to other root methods for other devices and if you have no experience in bricking phones before then you're screwed if it happens to you
Actually, if you follow the directions, almost none of the problems create a true brick-- which means unrecoverable. For most of the cases, you might get a soft brick, meaning you have to back out, use a KDZ to repair it or reflash something else, or start over from scratch and try again-- but usually (maybe with some help from here) you can pull the phone back into a usable state.
I would hazard to guess for the vast majority the process works fine, maybe with a hiccup, but I've not seen many reports of a truly unrecoverable brick from this method. It's complicated, yes, and you need to be ready to read a LOT to understand what's going on, but it seems pretty difficult to end up with a $700 paperweight with this.
So i have been trying tonroot my sprint lg v20 and everytime i try and go to the phone on mobile terminal to enter id
Then enter the apply patch /system/bin/atd /storage/emulated/0/dirtysanta i get this message and i cant go to step 2 to boot into recovery
Any help would be appreciated: i have a sprint v20 and i wanted to know if i have to flash the stock sprint rom or can i just flash lineage rom following this guide? I have it running on AT&T and i want to keep it on AT&T...
can you please assist
Could you help out, please? I don't believe I have hard bricked my LG V20 H910. However, I have read and tried all of the unbrick info out. It seems my screw up is unique. I completed dirty Santa then went to flash a custom. in the boot between that. I get a black screen and cant do anything even download mode will not come up. My PC does make its usual noises when i connect or disconnect, but my phone does nothing.
Ok, I managed to brick mine too. It's a VS995, it was running stock 1AC. I used the LGUP tool to downgrade it to VS99512A, and then did Dirty Sanata and TWRP. After booting into TWRP I decided to try lineage OS with Android 8.0, I did not make a backup of the Stock ROM, which was very stupid. Lineage OS 15.1 flashed but I had no cell service so I panicked and instead of wiping it in TWRP and using the backup of stock I should have created, I just opened LGUP and tried to downgrade it back to stock VSS99512A. Well LGUP said it worked, but when it went to boot it would hang at the Verizon logo with 4 pastel dots. Device manager could see an ADB device and I could connect to it with ADB. So I did and read the logcat. I could see it was trying to update as part of the rollback, but it appeared that some components from Android 8x could not be "upgraded" to Andoird 7.x. There was a repeated error about failing to update SQLite instance version from 3 to 1.
The one feature that could fix this is if the refurbish function worked with any of the VS995 KDZ files we all have access to. But alas, none work instead we only get the upgrade function... or so I thought. Somewhere in my search for the past 2 weeks I found a modified LGUP https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222
**Please be warned what I did was absolutely ****ing stupid, and it was sheer luck I didn't screw anything up.**
From what I can tell if you only flash ("LGUP Upgrade") the KDZ from the same model it never clears the partition it just adds to it. My problem was there was stuff from lineage OS 15 stuck on one of the partitions that was making the rollback to stock fail because it kept saying it couldn't update the SQLLite DB from 3 to 1. So no "upgrade" within LGUP would work because the upgrade function does not clear internal storage. But the link above is to a version someone modded so you can force a partition update from any KDZ onto the system. So I started playing around with forcing KDZs from other models onto my VS995, and I noticed when using the Partion DL function with non-VS995 KDZ files it would say something about the partition changing. All I can assume is that the partition layout is so different on each model and it forces LGUP to re-partition the storage.
**Again I state for the record this was stupid, and I'm only fortunate it worked.**
I forced Partion DL of H91510d_00_VTR_CA_OP_1110.kdz, then H990N10b_00_OPEN_HK_DS_OP_1017.kdz, then back to VS99512A_06_1114_ARB00.kdz, then when it booted it gave the Verizon hello, and moved on finally but the setting service kept crashing while it was trying to load the Secure Boot screen. So I yanked the battery and went into the boot menu and did the Factory Reset function, and it worked.
Lesson learned, always make a backup and don't be so hasty to use tools that aren't fully functional (LGUP).
Perhaps what I've done may help others, maybe I've found out how to reimage or unbrick our V20s. Or maybe I just got really stupid lucky.
Hi. I'm just gonna say this first: I didn't know entirely what I was doing when beginning this operation. I was just trying to do something fun and new, and it didn't pan out. I fully acknowledge that I am an idiot.
Now, the story. I was attempting to root my LGV20 with this guide: https://forum.xda-developers.com/v20/how-to/root-h910-v10m-t3664500 .
I have read over this thread more times than countable and thought I was doing everything correctly. I got to the "STEP3.BAT" portion of the guide and long story short, my phone crashed during it and somehow got foobarred.
It *kinda* works (as in it will boot for around a minute) and then blue/black screen into a reboot.
Is there any way I can save this phone? Hard resets, going into software, more dumb computer stuff, anything. I don't *need* to get this phone working again but it would be really preferable.
Simultaneously I fully accept the responsibility in failing the operations. I know that somewhere I must have messed up. If no-one wants/ can help me, tell me so. Just means new phone time.
If any more detail on what happened is needed, tell me.
First off: that guide is ONLY for the H910 (AT&T) variant, so make sure with your model
and also, when you said a "blue or black screen" it also has very small writings too, right? If so, then you may have faced a kernel/bootloader panic
Technically your phone is *still* alive, and your best method is to start over again, assuming if you read the whole guide carefully then you have backed up your firmware and can still access download mode.
Flash your stock firmware back (or use the H915 firmware provided by the guide), wipe and setup your phone again, then root the phone again.
I also suggest replacing the TWRP recovery inside the provided Dirtysanta folder cuz that's what i did when i faced the kernel panic
MEMO#22 said:
First off: that guide is ONLY for the H910 (AT&T) variant, so make sure with your model
and also, when you said a "blue or black screen" it also has very small writings too, right? If so, then you may have faced a kernel/bootloader panic
Technically your phone is *still* alive, and your best method is to start over again, assuming if you read the whole guide carefully then you have backed up your firmware and can still access download mode.
Flash your stock firmware back (or use the H915 firmware provided by the guide), wipe and setup your phone again, then root the phone again.
I also suggest replacing the TWRP recovery inside the provided Dirtysanta folder cuz that's what i did when i faced the kernel panic
Click to expand...
Click to collapse
Thanks so much. Freaked out over this for a good bit. Came back, did what you said and we're back at that step fully working. Life saver.
Now my first guess as to why step3 failed is that i didn't have the latest version of TWRP. How can I set that up?
Inside the root package folder you can see an .img file named twrp 3.0.2-1- us996.img
What i did was downloaded a later version
(not latest cuz my phone won't boot at the latest version for some reason), copied the name of the original twrp and renamed it, paste it to the folder, overwrite the old one, and try to root it again
MEMO#22 said:
Inside the root package folder you can see an .img file named twrp 3.0.2-1- us996.img
What i did was downloaded a later version
(not latest cuz my phone won't boot at the latest version for some reason), copied the name of the original twrp and renamed it, paste it to the folder, overwrite the old one, and try to root it again
Click to expand...
Click to collapse
Alright, i've done that now too. Thanks. Is there anything else i should/need to keep in mind to ensure failure is not going to happen? I want to make 100% sure I get everything right this time.
reptarien said:
Alright, i've done that now too. Thanks. Is there anything else i should/need to keep in mind to ensure failure is not going to happen? I want to make 100% sure I get everything right this time.
Click to expand...
Click to collapse
No i don't think there is more things to do, the guide you're following is pretty much straightforward already.
100% guarantee is always a stretch here in XDA. But if you're still facing problems you can ask for help on that guide's thread.
MEMO#22 said:
No i don't think there is more things to do, the guide you're following is pretty much straightforward already.
100% guarantee is always a stretch here in XDA. But if you're still facing problems you can ask for help on that guide's thread.
Click to expand...
Click to collapse
I really want to give up on this. This time I successfully made it through all Step 3, but I also noticed that my screen was kind of glitched and not rendering properly at that stage. After it rebooted, I unplugged my micro usb cable and it gave me an angry green warning message I will attach here.
If you/someone can tell me what to do with this message from here or instruct me on how to flash stock H910 10 q back onto the phone without doing TWRP (since i'm evidently incapable of installing it) I would be most appreciative.
Slightly better picture without anything cut off.
reptarien said:
I really want to give up on this. This time I successfully made it through all Step 3, but I also noticed that my screen was kind of glitched and not rendering properly at that stage. After it rebooted, I unplugged my micro usb cable and it gave me an angry green warning message I will attach here.
If you/someone can tell me what to do with this message from here or instruct me on how to flash stock H910 10 q back onto the phone without doing TWRP (since i'm evidently incapable of installing it) I would be most appreciative.
Click to expand...
Click to collapse
The screen glitching is normal, the green text after boot however is somehow not.
Sad to hear that it still didn't work, there something seems to be interrupting the process of rooting your phone. I dunno if it has something to do with ARB (anti rollback) preventing you to root
If you want to go back to your stock firmware that you backed up, you can:
-Carefully flash each file of your backed up firmware through adb and fastboot mode
-build a zip file of your firmware and flash through TWRP (since it didn't succeed tho)
MEMO#22 said:
The screen glitching is normal, the green text after boot however is somehow not.
Sad to hear that it still didn't work, there something seems to be interrupting the process of rooting your phone. I dunno if it has something to do with ARB (anti rollback) preventing you to root
If you want to go back to your stock firmware that you backed up, you can:
-Carefully flash each file of your backed up firmware through adb and fastboot mode
-build a zip file of your firmware and flash through TWRP (since it didn't succeed tho)
Click to expand...
Click to collapse
Could you reply with any links with a tutorial on how to do the first thing? Or describe it. Sorry for being so dumb i'm a total newbie lol
reptarien said:
Could you reply with any links with a tutorial on how to do the first thing? Or describe it. Sorry for being so dumb i'm a total newbie lol
Click to expand...
Click to collapse
Unfortunately i can't find any guides when it comes to flashing the back up.
I did read something back then on turning it into a zip file, but even if you can build one you still need TWRP, in which case you haven't successfully installed, so that's no option
Flashing the backup files requires specific commands, especially to the part on what partition should it be flashed to
When LGUP backs up your phone's firmware, you can see a vast number of files(i can't remember how were they named, I'll look up a reddit post about it)
The files where named based on what partition it came fom (H910_modemxx_COM12, H910_system_COM12 or something like that)
These are image files, what i did as far as i can remember was rename these files by adding an IMG extension for ADB to recognize
Flash them according to it's partition name:
"Fastboot flash system H910_system_COM12.img"
"Fastboot flash recovery H910_recovery_COM12.img'
Etc.
To go to fastboot, turn off your phone and hold the volume down button , then plug your phone to the PC.
But i really cannot guarantee this, because for all i know, in order to flash this you need fastboot, and to get fastboot you need to root your phone, because only the engineering bootloader has it (i'm sorry if it's wrong tho), and flashing these files to fastboot might be a bit dangerous because it will not verify the files, there may be chances that you might flash a corrupted file. so flashing via LGUP is the safest option so far if you don't know what you're doing