Hi all, hope you can help me. I've tried searching on the internet but no-one seems to be having any problems like mine. and my phone is now near enough bricked.
So i bought a LG G2 D802 from aliexpress, all working fine but no 4g lte option for some reason. Had a look around and seems updating to stock europe rom would have sorted this so i thought id do this.
So Updated the rom using flashtool2014, downloaded lg usb drivers, the europe rom D80220D_00 and lgmobile support tool. Went through the process and it all ran fine with no errors completed 100%and then said done pressed exit and disconnected phone.
Now, switched phone on . Straight away touch completely messed up click on the screen and different parts keep of the screen keep clicking. Eventually after 15mins managed to get out of the startup where it asks for wifi settings etc so i could try to factory reset. No luck even out of startup have not yet managed to get to the screen for usb debugging yet due to random screen clicking (keeps opening other apps, screens).
I cannot rerun the flashtool as i cannot enable usb debugging or even switch away from charge only to pc softwarw and it just says phone not connected on the flashtool and keeps ending.
Switched off by holding power button for long time. Holding down the down button and power does nothing just keeps restarting when i eventually let go.
Also sim is in phone but it says service disabled?
Any ideas how i can fix the phone! All was working fine before I did the europe rom update
Thanks
Jon
You can connect a mouse via otg and navigate to usb debug
Sent from my SM-N910H using XDA Free mobile app
Maybe try factory reset and just use mobile support tool update stock rom?
Sent from my LG-D803 using XDA Free mobile app
I would just use a wireless keyboard with an otg cable like sugested before
Sent from my LG-D805 using XDA Free mobile app
I eventually managed to select lg software as connection mode and flashed to another firmware but exact same issue again.
After trying for ages and opening the wrong thing again and again i managed to get to the screen in settings to click 5 times to enable developer options however now the screen just freezes and then you get a message saying settings has stopped working and phone locks up. This has happened 3 times since. Doesnt seem like anyway to get it sorted if i cant enable usb debugging.
Also it seems to be that the firmware change has erased the imei and that is what is causing all these problems. I found one site that details how to restore but once again you need usb debugging enabled.
Droidview has the page where you have to backup and restore imei, i dont have a backup so will need method 2. If i can get usb debugging enabled that is!
JON-JAY said:
I eventually managed to select lg software as connection mode and flashed to another firmware but exact same issue again.
After trying for ages and opening the wrong thing again and again i managed to get to the screen in settings to click 5 times to enable developer options however now the screen just freezes and then you get a message saying settings has stopped working and phone locks up. This has happened 3 times since. Doesnt seem like anyway to get it sorted if i cant enable usb debugging.
Also it seems to be that the firmware change has erased the imei and that is what is causing all these problems. I found one site that details how to restore but once again you need usb debugging enabled.
Click to expand...
Click to collapse
Try using onscreen phone maybe you could manage to set that up and then enable usb debugging?
.::.LG G2 D803.::.
.::.CLOUDYFLEX 2.7.::.
thanks for all the help, lg on screen just didn't work for some reason wouldn't connect to the phone. Was thinking about a otg cable but after an hour of clicking again and again I managed to get the developer options and usb debugging enabled.
I went through the procedure at droidview to restore imei using qpst but after finding the com port it says no phone detected so theres nothing more I can do, looks like I just have to accept this brand new brick lol.
Anybody know anywhere in London that does repairs like this, I have tried a couple of shops in London Victoria near work but they couldn't do anything. Apparently theres something called an octoplus/octopus box that can fix LG G2 imei or flash firmware.
Thanks again for everyones suggestions. .
Jon-jay, I have the same issue. I tried the "easy" kdz flash and tot flash and basically bricked my phone. The phone turns on but the screen is calibrated incorrectly like you describe so I can't click anything without trying over and over. I click one area of the screen and another is activated. I can pull down the notification pane but can't click anything in there. The phone is in a boot loop too if I don't touch it. I also want to turn on USB debugging so I could try to restore with adb or fastboot. I will let you know if I find anything.
Yeah very tricky to fix this phone after flashing. Ive flashed loads of lg phones with the flash tool and never any problems until now. Ive currently sent to a shop in south wimbledon who quoted me £50-£80 for repair if he could fix it. I dropped it off on mon and still no response so im not holding my breath. It seems this phone will be going to the recyclers if he cant do anything.:crying:
JON-JAY said:
thanks for all the help, lg on screen just didn't work for some reason wouldn't connect to the phone. Was thinking about a otg cable but after an hour of clicking again and again I managed to get the developer options and usb debugging enabled.
I went through the procedure at droidview to restore imei using qpst but after finding the com port it says no phone detected so theres nothing more I can do, looks like I just have to accept this brand new brick lol.
Anybody know anywhere in London that does repairs like this, I have tried a couple of shops in London Victoria near work but they couldn't do anything. Apparently theres something called an octoplus/octopus box that can fix LG G2 imei or flash firmware.
Thanks again for everyones suggestions. .
Click to expand...
Click to collapse
Check out the thread lg g2 is unbrickable now, it involves shorting a couple capacitors to unbrick but its ingeneious. I bet itll help you out.
.::.LG G2 D803.::.
.::.CLOUDYFLEX 2.7.::.
the plot gets thicker...
okay so it has been a few months now and I revisited the phone sitting around. This is how I got on:
I gave the phone to shops in London, no-one could fix it got it back first week of Jan. So I thought I'd retry myself.
One guy told me that the imei may be for D802 but the screen and insides of the phone is a d800 model.
That makes sense as the touch works erratically. This was a refurbished phone I bought from aliexpress which claimed to be a EUR D802 but after I took the back cover off it says D800\d801\d803 inside on a lot of the flex connections and at the bottom of the plastic it says d800. I downloaded the AT&T stock rom and flashed with octoplus - touch worked perfectly! but phone kept restarting itself and looping really badly so I put in download mode and went back to D802 uk firmware - and touch not working again.
(Prior to this I bought the octopus box also in the hopes that restoring the imei I had previously lost will somehow be related to the screen.
This worked in restoring imei only and I have restored the d802 imei with octopus box)
Anyhow I then flashed stock uk firmware on the phone so everything in the phone works perfectly fine except the touch! so I am controlling touch with otg cable and mouse.
my next thought was install a d800 custom rom it will fix the touch! Now I then rooted, and installed d802 autorec.apk. I came on xda and downloaded a d800 stock custom rom (D80020k) from the AT&T subsection and thought I'd install this through twrp. All though the custom rom says successful when I reboot it comes to fastboot mode again. so I then go about restoring the stock d802 firmware. I installed d800 autorec.apk but that too send to fastboot mode.
So I am lost. Everything working perfect except the touch. Any ideas anyone? Im hoping some one says there is a stock lg custom rom that has all the screen settings for d800/01/02/03 which will sort my problem!
What it seems is the chinese company selling the refurb has somehow managed to get a d802 imei on a d800/01/03 not entirely sure how this is possible either!
JON-JAY said:
What it seems is the chinese company selling the refurb has somehow managed to get a d802 imei on a d800/01/03 not entirely sure how this is possible either!
Click to expand...
Click to collapse
What they're doing is flashing a d802 system.img with otherwise d800/01/03 firmware.
I saw a thread in the T-Mobile G2 area saying to get d802 on your d800/d801 you just flash a custom d802 rom and then a d800/801 kernel but this causes my phone to go back to fastboot...still lost! the custom rom works fine itself (Except for touch again!)
JON-JAY said:
I saw a thread in the T-Mobile G2 area saying to get d802 on your d800/d801 you just flash a custom d802 rom and then a d800/801 kernel but this causes my phone to go back to fastboot...still lost! the custom rom works fine itself (Except for touch again!)
Click to expand...
Click to collapse
There is a way to get them back to their original frankenphone state but it's quite a procedure. Flash d802 firmware. Use a otg usb mouse to navigate since it'll have touch issues. Root and install custom recovery using the actual hardware as your guide to which twrp version to install. D800 in your case. Do a nandroid backup. Move the nand backup to your pc for safe keeping. Now install d800 firmware using a hex edited tot to allow it to proceed and a generic dll to avoid cross dll issue. Root, install twrp again. Move twrp backup from pc to phone. Do a restore but only restore the system.img. Now you have firmware that cooperates with d800 hardware while appearing and acting like a d802 in every other way.
The other thought I had but have not tested yet would be to flash d800 firmware right off the bat, then root and install twrp. Then use dd to flash system.img to it's partition ( /dev/block/mmcblk0p34 ). I'm not sure how that would work due to the very large size of the system image. You'd have to extract it from the kdz. Because it's so large when it's extracted, it does it in parts so it must be merged back together to make one file. But if it did work, it'd save the step of having to root/recovery twice on two separate firmwares.
Related
Hi Friends,
I am new to this Forum and Android as well. I recently bought unlocked LG G2 32 GB in India. It was:
Model - D802
Android version - 4.4.2
Software version D80220b
As it's wifi reception and network reception was not good, I thought of installing the ROM again. The biggest mistake that I did not install any recovery and didn't even rooted my device. I checked with root checker and it showed that your device is not rooted. Then I follow the method given on below link:
http://forum.xda-developers.com/showthread.php?t=2432476
I took the firmware file named "India 32GB D80210C_00.kdz" and select type as "3GQCT" and performed the Normal Flash. It went well but after it booted up, my touch screen calibration was totally lost. I connected mouse using USB OTG cable and calibrated the device but it didn't work out. Calibration still seemed gone.
After all try, I couldn't do much and read of TOT method to go back on Jelly Bean. I did that as well using "BIN_LGD802AT-00-V10b-SEA-XX-SEP-04-2013-32G+0.exe" from which I extracted the TOT file and performed the flashing again by coming in "Download mode".
After that my phone is in boot loop and same issue of lost screen calibration. If I try to go into recovery it gives me option only to factory reset the phone which does not help out at all. I guess it's because i didn't root my phone and didn't even installed any recovery.
I know I have done a lot of mess with no knowledge but please help me out as its my new phone and I have hardly used it for 1 month and it's not even under warranty.
Thanks.
grvshri said:
Hi Friends,
I am new to this Forum and Android as well. I recently bought unlocked LG G2 32 GB in India. It was:
Model - D802
Android version - 4.4.2
Software version D80220b
As it's wifi reception and network reception was not good, I thought of installing the ROM again. The biggest mistake that I did not install any recovery and didn't even rooted my device. I checked with root checker and it showed that your device is not rooted. Then I follow the method given on below link:
http://forum.xda-developers.com/showthread.php?t=2432476
I took the firmware file named "India 32GB D80210C_00.kdz" and select type as "3GQCT" and performed the Normal Flash. It went well but after it booted up, my touch screen calibration was totally lost. I connected mouse using USB OTG cable and calibrated the device but it didn't work out. Calibration still seemed gone.
After all try, I couldn't do much and read of TOT method to go back on Jelly Bean. I did that as well using "BIN_LGD802AT-00-V10b-SEA-XX-SEP-04-2013-32G+0.exe" from which I extracted the TOT file and performed the flashing again by coming in "Download mode".
After that my phone is in boot loop and same issue of lost screen calibration. If I try to go into recovery it gives me option only to factory reset the phone which does not help out at all. I guess it's because i didn't root my phone and didn't even installed any recovery.
I know I have done a lot of mess with no knowledge but please help me out as its my new phone and I have hardly used it for 1 month and it's not even under warranty.
Thanks.
Click to expand...
Click to collapse
There might have been a problem with the firmware that you used and the flash method. Use this to find your firmware and pick cse flash this might solve it.
I searched the firmware in your given link by my IMEI number, but I have a problem. After I click on "Upgrade start" in "Normal web test upgrade", it does not give me country select option. Instead it open LG Mobile support tool which just keeps on showing "Waiting for Connection".
If I click start upgrade without selecting "normal web upgrade test", it gives me country selection window.
What should I do? Can I directly click on "Start upgrade" ?
try this one
http://forum.xda-developers.com/showpost.php?p=51265001
OP I have the same problem, see my recent posts. Let me know if you found a fix.
Hi there,
I realy need your help on my problems with the G2 32GB D802.
I bought it on ebay and instead of getting it from GB it came from HongKong and I didn't think about it that it does not have a european ROM.
First I wanted to root and flash custom recovery and cloudyG3 rom. After rooting with ioroot and installing the TWRP I stuck in the fastboot mode. First problem I did not make a backup because I never reached TWRP. Download mode only appeared for a second an then disappeared again.
After a lot of searching I found that probably the 802autorec.apk was wrong, since I don't have a european model. So I installed via fastboot a laf.img for a D800. After that the download mode was working again and I installed different roms via flashtool2014. The installation worked again but after rebooting the phone I had a lot of trouble with it. That the reason for trying different roms as I sad befor.
First, the fingertip points at different areas of the screen but not there where you are touching the screen. So you can not reach the buttons or write on the keyboard.
Second, after connection to pc I recognized that my 32GB model had only 10GB internal memory.
Finaly I can not use the phone. For me it seems that I burned my partitions and need your help to get it right again.
Please give me a chance.
Best regards an thanks for helping me.
p.s.: I tried to go to the settings menu in the phone and reached it after a lot of confusing taps on the screen. All the phones informations like IMEI and all the other disappeared. Something realy went wrong with it.
No one an idea how to get back to normal?
frankhell said:
No one an idea how to get back to normal?
Click to expand...
Click to collapse
I have the same problem. Bought LG G2 D802, wifi connection was weak. I downloaded Lg PC Suite and upgraded the system. After upgrade have the same touchscreen problem. Have tested for 5-6 firmwares, but the problem is.
Do not exactly know what firmware need to install.
Please help us.
enter enginnering mode and update the touch firmware may work for you？
frankhell said:
Hi there,
I realy need your help on my problems with the G2 32GB D802.
I bought it on ebay and instead of getting it from GB it came from HongKong and I didn't think about it that it does not have a european ROM.
First I wanted to root and flash custom recovery and cloudyG3 rom. After rooting with ioroot and installing the TWRP I stuck in the fastboot mode. First problem I did not make a backup because I never reached TWRP. Download mode only appeared for a second an then disappeared again.
After a lot of searching I found that probably the 802autorec.apk was wrong, since I don't have a european model. So I installed via fastboot a laf.img for a D800. After that the download mode was working again and I installed different roms via flashtool2014. The installation worked again but after rebooting the phone I had a lot of trouble with it. That the reason for trying different roms as I sad befor.
First, the fingertip points at different areas of the screen but not there where you are touching the screen. So you can not reach the buttons or write on the keyboard.
Second, after connection to pc I recognized that my 32GB model had only 10GB internal memory.
Finaly I can not use the phone. For me it seems that I burned my partitions and need your help to get it right again.
Please give me a chance.
Best regards an thanks for helping me.
p.s.: I tried to go to the settings menu in the phone and reached it after a lot of confusing taps on the screen. All the phones informations like IMEI and all the other disappeared. Something realy went wrong with it.
Click to expand...
Click to collapse
I now have the answer from the dealer that my G2 has the Firmware D80220B.
Just try and test it. Good luck.
@Angryyolk
I just ask myself how to enter engeniering mode?
Thanks for your help.
I walked one step forward now.
But there is still no solution for my problem. I found a link to LG "http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI" to get the information about the version of my stock ROM. Just replace IMEI by your real number and you will get it.
In the meantime I flashed the rom with flashtool but the screen behaviour is still the same.
I later rooted the phone with towleroot and then installed the correct autorek.apk for the D802. That worked properly. I reached TWRP but in fact of the weired screen behaviour I couldnt do something. I tried to fix my IMEI problem with QPST but this tool showed only empty tables on my PC when I connected my G2 with usb.
I tried an update of the screen firmware as posted above. The code that has to be entered on the dialer is 3845#*802# but it wont work for me since I can't enter "settings" the service menu. That's because of the weired behaviour.
Beste regards
I now was able to enter the hidden menu. And I was able to get to the menu point "update touch firmware" but nothing happend.
What is wrong?
touch screen problem
The same problem occurred on my phone. how did you do it. please help.
I installed the software and touch screen freaked out.
It's because its a Refurbished Models..
You have to check your Mother board for exact Model
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
a few feeks ago bought a second hand lg g2 d802 running kitkat 4.4.2 wich was only detecting 2g when i try to connect to the internet, i tried to solve this problem by entering the hidden menu and selecting the network types it could detect but no luck, so i decided to upgrade to lollipop, i downloaded the lg support tool and went for it, when the update was done i found myself with an almost completly functioning device except it had the "imei=null" problem, meaning no network at all --"
i tried the QPST but it was unable to detect my phone, so i decided to root my phone and go for a custom rom, the cyanogenmod13 nightly (i don't really know what i was thinking at that point :s ) and when done i was stuck in a bootloop, so i tried flashing a stock rom kdz method but the lg flash tool would stop automatically. since then i've been trying to flash stock TOT roms, the process would stop at 94% and the phone reboots. the screen shows random pixels and lines, the start up lg tune is there and i feel vibration when i press the home buttons location, i've tried to reset it to factory settings and i've used theLGUP_8974.dll, selecting the BOARD DL option in the lg flash tool but that didn't solve the problem. i have read somwhere that it could be a kernal problem, i don't know if i should go that way ( am at that point where i don't want to mess up my device anymore xD ) what do you guys think?
thank you for your help
restlessone said:
a few feeks ago bought a second hand lg g2 d802 running kitkat 4.4.2 wich was only detecting 2g when i try to connect to the internet, i tried to solve this problem by entering the hidden menu and selecting the network types it could detect but no luck, so i decided to upgrade to lollipop, i downloaded the lg support tool and went for it, when the update was done i found myself with an almost completly functioning device except it had the "imei=null" problem, meaning no network at all --"
i tried the QPST but it was unable to detect my phone, so i decided to root my phone and go for a custom rom, the cyanogenmod13 nightly (i don't really know what i was thinking at that point :s ) and when done i was stuck in a bootloop, so i tried flashing a stock rom kdz method but the lg flash tool would stop automatically. since then i've been trying to flash stock TOT roms, the process would stop at 94% and the phone reboots. the screen shows random pixels and lines, the start up lg tune is there and i feel vibration when i press the home buttons location, i've tried to reset it to factory settings and i've used theLGUP_8974.dll, selecting the BOARD DL option in the lg flash tool but that didn't solve the problem. i have read somwhere that it could be a kernal problem, i don't know if i should go that way ( am at that point where i don't want to mess up my device anymore xD ) what do you guys think?
thank you for your help
Click to expand...
Click to collapse
Sounds like to me you may not have a D802. You'll need to take the back cover off, and look and see what model #s you see. As if your having screen issues that sounds like your flashing a D802 firmware on a D800 or D801.
Also remember flashing will almost always stop before 99%.. Anything after 85% its done this is normal and will almost always happen.
These D802's have a LONG history (mostly bought referbs) of not being what they are being sold as.
hyelton said:
Sounds like to me you may not have a D802. You'll need to take the back cover off, and look and see what model #s you see. As if your having screen issues that sounds like your flashing a D802 firmware on a D800 or D801.
Also remember flashing will almost always stop before 99%.. Anything after 85% its done this is normal and will almost always happen.
These D802's have a LONG history (mostly bought referbs) of not being what they are being sold as.
Click to expand...
Click to collapse
the problem has been solved, it tuned out to be an ls980, now my G2 is fully back to life :laugh: thanx alot hyelton for your help :good:
I don't know where else to put this since this phone does not have its own forum here.
Here is my problem...
My vista was rooted and I was going to sell it to a friend so I was doing a factory reset with the phones built-in option... And the stock factory reset makes it all the way to where I enter my first and last name and then after doing so I get this error...
LGsetupWizard has stopped (there are more words but this sums it up)
And then the Setup Wizard restarts.
I then go through the setup process again thinking it will go through this time... Same error message... LGsetupWizard has stopped, and it restarts itself.
I have searched for a fix for this EVERYWHERE and cannot find a fix... I cannot even find the stock rom/firmware for my device: AT&T LG G Vista D631
The official website has no download and the only "stock" ROM/firmware I can find is for the Verizon VS880 and it's counter parts...
Can ANYONE help me get this phone fixed and make it all the way through the LGsetupWizard without it looping/stopping/crashing???
Really need some help from the pros as I have exhausted all my tools/methods in finding a fix/solution.
EDIT: I am able to get into the settings menu (with fast fingers) right after I click OK to get rid of the error message.
I have turned on DEV MOD and enabled all the settings needed in order to flash stuff and put stuff onto the phone via computer USB...
How can I fix this problem if I am able to have access to DEV MOD on phone???
Problem solved.
I used LG D631 TOT DLL.rar and LG Flash Tool.
I forgot where I got these files from, but I am sure a simple search on a search engine will help you find them.
After I got it to boot back up, I used TitaniumBackup and found that LGSetupWizard was "frozen"... So I unfroze it and did the factory reset again and it went all the way through the LG Setup.
Hi, I followed the DirtySanta tutorial, used the US996 DeODEXed Rom. I knew this was a possibility but thought that I could get back to stock using the KDZ, unfortunately my phone is now seen as US996. I've tried modifying both the build.prop, and KDZ but I still can't get LGUP to flash back to stock. Is there anything I can do?
Service Unavailable is probably due the frequency signal issue.
Remember that Wind runs in AWS bands, while the US996 runs on regular bands (Bell, Rogers, Telus)
I'm sure the phone works fine if you use a Rogers SIM on it.
so, the trouble / solution is figuring out how to flash back the Tmobile / Wind modem back into the phone.
also set the phone to use the proper AWS bands 1700 / 2100, or the new LTE band 66
AllGamer said:
Service Unavailable is probably due the frequency signal issue.
Remember that Wind runs in AWS bands, while the US996 runs on regular bands (Bell, Rogers, Telus)
I'm sure the phone works fine if you use a Rogers SIM on it.
so, the trouble / solution is figuring out how to flash back the Tmobile / Wind modem back into the phone.
also set the phone to use the proper AWS bands 1700 / 2100, or the new LTE band 66
Click to expand...
Click to collapse
T-Mobile H918 supports LTE Band 66, try and flash a H918 ROM maybe? Or access the hidden menu and enable AWS, but you'll lose LTE and only have 4G that way.
See here to access the hidden menu but change 915 in the command to 996 or the model the phone is showing as.
https://forum.xda-developers.com/v20/how-to/access-hidden-menu-h915-t3515098
Edit: Let me know if it works, and you get LTE back (not just 4G) I really want to know to root my H915 as well. You used the [LS997|VS995|H910|F800L] DirtySanta Bootloader unlock and Root guide by me2151, right?
Second edit: If you're going to try to flash an H918 ROM I'd strongly suggest you flash an H918 kernel that is suggested in the dirty santa thread, I think the Konverged is what people are using. No hard evidence either way flashing an H918 ROM would work but it may not as the boot image is a 996.
Thanks guys. I flashed the Konverged kernel earlier, it helped crash-wise but nothing on the signal end. Last night I extracted the files from the H91510e kdz and tried to flash the modem that was included but that hasn't helped, I want to try the CDMATool but it isn't recognising my account so I'll wait for a bit. I tried to use the hidden menu but it doesn't seem to do work on this firmware unfortunately.
Splinter77 said:
Thanks guys. I flashed the Konverged kernel earlier, it helped crash-wise but nothing on the signal end. Last night I extracted the files from the H91510e kdz and tried to flash the modem that was included but that hasn't helped, I want to try the CDMATool but it isn't recognising my account so I'll wait for a bit. I tried to use the hidden menu but it doesn't seem to do work on this firmware unfortunately.
Click to expand...
Click to collapse
Try this, make sure USB Debugging is enabled. Turn off phone. Remove the battery. Put battery back in. Hold the volume up button and plug in USB cable. It may boot into download mode or it may boot into the dirty santa corrupt screen. If it does boot into the corrupt screen , let go of up button, press the power button then IMMEDIATELY press the volume up button. Either way you should be in download mode. You want download mode, not fastboot. Make sure LGMobileDriver_WHQL_Ver_4.1.1.exe drivers are installed.
Download LG Support Tool. http://www.mylgphones.com/lg-software-tools-download the 'Download and install LGMobileSupportTool.exe' link. Install and run it. If you've already installed the drivers hit cancel when they go to install.
Then go to 'Options' 'Upgrade Recovery' Make sure you have the IMEI number from under the battery and put it in no dashes or spaces. It should download and install the firmware if you've done the tap 'About Phone' 'Developer Options' 'Enable USB Debugging' but I'm sure you know this.
If all goes well you should be back on stock firmware.
Hope it works, it should but I'm not 100% sure.
The good news is that it recognized my phone as H915, but unfortunately half way through the setup it through a weird error. Part of me is thinking of restoring my twrp backup and trying uppercut again. I'm hoping that will get the program to see my phone correctly.
EDIT: I tried the KDZ installer again, without trying to restore the TWRP backup and my phone is back to stock and getting a signal. Thanks again to the both of you.
Splinter77 said:
The good news is that it recognized my phone as H915, but unfortunately half way through the setup it through a weird error. Part of me is thinking of restoring my twrp backup and trying uppercut again. I'm hoping that will get the program to see my phone correctly.
EDIT: I tried the KDZ installer again, without trying to restore the TWRP backup and my phone is back to stock and getting a signal. Thanks again to the both of you.
Click to expand...
Click to collapse
What I suggested worked without the TWRP backup? Or another way?
your best bet is to somehow find a way to install the stock rom through TWRP then you can install the KDZ. Cause I had the same issue as you, i have a Verizon V20 with the US996 rom and it wouldnt let me flash the verizon KDZ until I installed NotSoStock rom thats based on the Stock Verizon Rom
EDIT: Just saw you got back to Stock. Disregard this lol
KedarWolf said:
What I suggested worked without the TWRP backup? Or another way?
Click to expand...
Click to collapse
I didn't use the TWRP backup at all in the end. Your method didn't fully install, but it made the phone see itself as an H915 again which allowed uppercut/LGUP to install the KDZ so it was a big help
Congrats! on the recovery, this is a good reference thread for anyone trying to recover from a bad root, and needs to get back to stock.
Splinter77 said:
The good news is that it recognized my phone as H915, but unfortunately half way through the setup it through a weird error. Part of me is thinking of restoring my twrp backup and trying uppercut again. I'm hoping that will get the program to see my phone correctly.
EDIT: I tried the KDZ installer again, without trying to restore the TWRP backup and my phone is back to stock and getting a signal. Thanks again to the both of you.
Click to expand...
Click to collapse
did you use the upgrade option in the lg up tool of refurbish
If you guys still have issues with service disabled i was able to fix my device by using the hidden menu options on this thread and selected (device reset R&D only) once i selected this option i finaly recived service
mmjs14 said:
If you guys still have issues with service disabled i was able to fix my device by using the hidden menu options on this thread and selected (device reset R&D only) once i selected this option i finaly recived service
Click to expand...
Click to collapse
@mmjs 14
Are you saying you have a rooted 915 with everything working?
guess not lol
I am having the same issue with an h910, but the service only works sometimes. Many times it is searching (and draining the battery in the process), but sometimes it will get service and be OK. Quite frustrating, and no way to revert because no kdz available. Anyone else with h910 having this problem?
Hi,
I'm not sure if I'm off topic here or not. I have an LG V20 H910-10c (Nougat 7.0) and I am having an issue with a Service not working after using DirtySanta to Root my phone and I am praying that someone can help me out with. I have already tried a Factory Wipe/Reset and Wipe Dalvik/ART & Cache and have Formatted Data to remove Encryption, etc..
Timeline: The phone worked fine in all aspects before Rooting it.
After Rooting it, I had this issue.
I then tried a Factory Reset and got stuck in a TWRP Bootloop.
I fixed the Bootloop issue with a Reset (Yes then Yes).
The issue is still there.
ISSUE: When I boot into Android, I get the following message;
"LGSmartcardService has stopped"
.....and I cannot use my External SD Card (TWRP sees it fine, I Flashed SuperSU from it).
I have Googled my brains out and simply cannot find any suggestions, except to perform a Factory Reset, which I did and that's what put me into the Bootloop and I reset the way you said and now it boots up okay, except that error message is still there.
I have not put any apps on the phone or anything. It's factory fresh (except for Rooting it).
I hope I'm not violating any rules by posting this, but the page I used to Root it has a REAL SMALL downloadable file called "V20-Root.zip" that contains everything, including the Batch files with the steps that they perform in them. I did NOT use the ROM, as that's ONLY for Sprint users and my phone is an AT&T model (Unlocked and my Carrier is MetroPCS). But I put it here, just in case someone wishes to bless me by taking a look and seeing if there's something to note. I am not a coder by any means. I do understand some basics, but I couldn't see anything that would cause this sort of problem. I did NOT install the ROM listed, because it's for Sprint users ONLY and I have an AT&T (Unlocked, using MetroPCS) H910. Here's the link to the page:
https://tinyurl.com/yacdendm
I really need my Ext SD Card to be seen! I use it extensively and it would be a real hindrance not to have it! Plus this is my ONLY phone (no landline) and I am disabled and must run everything, including my home network and laptop, etc. from it and I need its space for things I have to have available on my phone to do things that I need to do, so any help would be appreciated GREATLY!
I do need to be Rooted, so going back to factory with whatever Mpdel # ROM an LG Tool sees me as might make me unable to Root again.
Please Help Me and Thank You!
Dave