[Q&A] [KERNEL] Semaphore N4 2.4.0 - Nexus 4 Q&A, Help & Troubleshooting

Q&A for [KERNEL] Semaphore N4 2.4.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] Semaphore N4 2.4.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Was a huge fan of Semaphore on the Captivate, got an N4 was totally pumped about getting Semaphore again.
Flashed over CM11-M12, 4.4.4 w/ 2.4.0 (latest as of today) -- And I get this:
http ://i.imgur.com/n1xAYFll.jpg
It looks like someone said that the screen was ABGR instead of ARGB.
Further, I don't know if this is just my N4 being weird but during boot the boot animation is scanlined and bad.
edit: Happens with 2.3.3 too.

indrora said:
Was a huge fan of Semaphore on the Captivate, got an N4 was totally pumped about getting Semaphore again.
Flashed over CM11-M12, 4.4.4 w/ 2.4.0 (latest as of today) -- And I get this:
http ://i.imgur.com/n1xAYFll.jpg
It looks like someone said that the screen was ABGR instead of ARGB.
Further, I don't know if this is just my N4 being weird but during boot the boot animation is scanlined and bad.
edit: Happens with 2.3.3 too.
Click to expand...
Click to collapse
semaphore doesn't work with cm...only aosp
use this semaphore modified to work with CM....
http://mirror.lnx.im/android/mako/jolie/mods/Jolie_Belle_Kernel_Mako_2.4.0-CM-F2FS-auto.zip

Hi Stratosk
Flashed Lollipop Factory Image & Latest Twrp then Semaphore 3.0b !
System worked like a Charme many thx to your great Work !
Also get Root with Chainfires latest Beta after flashing Semaphore Kernel no Problems with Nexus 4

need wipe?
Is there any loss of data on lollipop?

Back To Stock/Soft-bricked Bootloop not working
Wrong thread sorry

display colours changed
i flashed the kernel on my nexus 4 running liquidsmooth rom latest build.. i flashed the kernel via twrp recovery..after rebooting my display colors have been changed like this..

Color profiles don't appear on screen shots.

Hi guys,
M new to this kernel...
Just wanted a feedback from you guys...
How much sot you get?
And does it support otg?
Your guidance is appreciated
Thanks

Plz.. Let me know
Hi thanks for developing this awesome kernel. It's simplicity makes me want to stick with this kernel a bit longer.
I'm new into undervolting, and lack of knowledge of it. Please tell me that this values are good enough for me?
See attachments

Related

[Q&A] [05 NOV 14] [Kernel] [SM-N9005] {TW] AEL Kernel v7.10 [FEATURE PACKED] [STWEAK

[Q&A] [05 NOV 14] [Kernel] [SM-N9005] {TW] AEL Kernel v7.10 [FEATURE PACKED] [STWEAK
Q&A for [05 NOV 14] [Kernel] [SM-N9005] {TW] AEL Kernel v7.10 [FEATURE PACKED] [STWEAKS]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [05 NOV 14] [Kernel] [SM-N9005] {TW] AEL Kernel v7.10 [FEATURE PACKED] [STWEAKS]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
selinux permissive
I'm trying to set my note 3 4.4.2 SELinux to permissive...is this kernel what I need to download or is there something simpler? Also if I need this download, how exactly do I get it on my phone? Excuse my newbness...having issues with the touchscreen on my appradio 3 and need to figure this out asap thanks
Thanks
thanks
Thanks so much. Can i use this kennel for note 3 n900s(korea) thanks
atuntu score
Hello i was on lean kernel note 3 g00h rom and had 38k score in atuntu i just installed this kernel and my score went to 28k a 10 k drop what is the reason
i am excited about this
New feature?
What a nice Kernel =D I have a question, can you add some unlock effect for the touchwake pls? =)
HaydenRude said:
i am excited about this
Click to expand...
Click to collapse
Hi ... i am using echo rom at my note 3 and i tried many times to put this kernel.but my device never boot .. always stack.. PLEASE HELP ME .. TELL ME WHAT AM I DOING WRONG ...
please ....??
Anyone can provide their best settings for less battery consumption and less thermal heat on the phone?
sweep to sleep function
Hi how can I disable the sweep to sleep function since I've tried ticking and un ticking the box but yet it still is active is there any other way to disable it since it's causing problems in games .. thanks in advance
umm is anyone still using this
Is anyone still using this kernel since been a while an still no reply regarding a problem I have with it
yup im still using this kernel running stock 4.4.2
cryostasis25 said:
yup im still using this kernel running stock 4.4.2
Click to expand...
Click to collapse
Maybe would you have any answer to my question at the end of page 1 then? are you also using the latest ver.?
Best settings for ael
What are the best settings for this kernel? Hotplug and governor
My Note 3 auto-sleeps randomly sometimes even though there is no setting in S-Tweaks. I'm running original stock 4.4.2 NF3 ROM. Thanks in advance
loved this kernel , thank you!
I've tried many kitkat kernels but most times I found myself coming back to Ael for the sheer amount of features and amazing performance. Battery wasn't the longest I've ever had but it was solid and in terms of overall compatibility and features of the kernel, it was the best of the bunch. Just wanted to extend my sincerest thanks for your efforts friedrich420.
I've officially moved over to lollipop now that the official build has dropped so I'll be waiting for excellent work on a new kernel once the Samsung sources drop.
Cheers

[Q&A] ROM] [5.0.2] Project D.I.S.C.O. - 1.0 - Mako [2015/01/13] [OFFICIAL]

Q&A for ROM] [5.0.2] Project D.I.S.C.O. - 1.0 - Mako [2015/01/13] [OFFICIAL]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ROM] [5.0.2] Project D.I.S.C.O. - 1.0 - Mako [2015/01/13] [OFFICIAL]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can you please add quick launch shortcut(the ring thing when holding home button). I lock my phone use it . Thank you !
I have it on my to-do list
Running 5.1 pre2 and so far everything has been great. I noticed in the features section (for 5.0.2) an advanced power menu is mentioned. Is that in the pre2 build?
Sorry, didn't make on that build but I hope on next.
new but not new nexus 4
Picked up a nexus 4 on the cheaps. Issue is device is stuck on cwm. Apparently previous owner deleted is files and now won't boot into anything other than recovery. I have stock os file and two ROMs I was thinking of trying. My problem is I can't communicate with device (no drivers) I downloaded the universal drivers and I also downloaded both google and nexus drivers that I got from other posts on here. I still can't see my device on my computer. Any help???
Your post isn't related to the topic/thread
Great work on the ROM. Guess 5.1/Test-4 does not include battery percentage at status bar and some other things mentioned in the feature list yet? Which radio/bootloader versions should I be running with 1.1? All I'm getting with is bootloop.
Uksav said:
Great work on the ROM. Guess 5.1/Test-4 does not include battery percentage at status bar and some other things mentioned in the feature list yet? Which radio/bootloader versions should I be running with 1.1? All I'm getting with is bootloop.
Click to expand...
Click to collapse
yes, no battery percentage right now, maybe I leave it out.
how, what did you flash to get bootloops? from 1.0 I wouldn't dirty flash. but from pre2 to pre4 i did clean and dirty flash and have no issues.
I did clean flash, couldn't get it to boot no matter what I wiped. Need to run 5.0.x droid until Xposed is updated, can't live without that.
Take another rom if you wanna use xposed, thank you
Hey Cem0,
Would it be possible to add in the volume rocker long press to change music tracks while the screen is off? It's one feature that I used all the time on some other roms. Very handy for changing tracks while driving, exercising, doing dishes etc.. If not, no biggy. I can live without it. Great work so far
Hi, Can i flash Semaphore_N4_3.0.5 on this rom? I'm on disco_mako-pre4.
Great Rom!! Perfect for me. Thanks.
I had the 3.0.4 version running on that, I guess .5 won't be a problem, maybe I'll add my build of sema with kexec patch again on the ROM, but later
Very good ROM, thanks!
thanks, good ROM))

[Q&A] [Kernel][4.4][carcosa-kernel][Stock kernel with cherry-picked features][2014/0

[Q&A] [Kernel][4.4][carcosa-kernel][Stock kernel with cherry-picked features][2014/0
Q&A for [Kernel][4.4][carcosa-kernel][Stock kernel with cherry-picked features][2014/04/24]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Kernel][4.4][carcosa-kernel][Stock kernel with cherry-picked features][2014/04/24]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Usage on CM12
Hi guys, have someone tested it on CM12? I'm now on the CM12 using the stock kernel, but after long time of standby the N7 starts lagging very hard (sometimes for entire minutes) and needs a reboot. I tried the carcosa on the Synman GwT ROM and I appreciate so much, if it could improve the performance of the CM12 it will be perfect!
Thanks to all!
I have CM12 too and I would absolutely suggest you to flash the carcosa kermel: with standard kernel antutu result was very very near 20.000 +something like 19.670)c while with carcosa, with no particular settings changed with Trickster, I do 24.000
Very good result if we think at the age of our device.
Obviously not all lags are gone, but I would never come back to cm stock kernel!
Nexus 7 2012 tilapia
Nexus 7 2012 tilapia bootloop if i try this kernel whith cm12 f2fs
carcosa-kernel a35 build - is it possible to use it with Android 4.4.4 and 5.1.1?
a35 should work with 5.1.1, though I haven't tested it. I do not know whether it will work on 4.4.4 -- it's built from the sources released with 5.1. This is an anykernel package, and there were not many kernel changes, so it *may* still work on 4.4.4. I would be very sure you have a backup of your boot partition if you want to try it.
overclock
Hi, I tried the carcosa kernel in my N7 2012. The only reason why I installed was the battery drain during airplane mode. I don't need the CPU/GPU overclock. Is there any possibility to lower the max freq? I tried some apps to do that, but the 1600MHz mode didn't disappear. My gadget warms up, and when I use it (not in deep sleep) the battery exhausts faster than in the stock frequency (1300MHz).
Balázs
You should be able to set the CPU frequency back to stock with TricksterMod, which works for me.

[Q&A] [KERNEL] [SM-G900F] [Samsung Stock LP] Boeffla-Kernel 1.0-beta2 (02-04-2015)

[Q&A] [KERNEL] [SM-G900F] [Samsung Stock LP] Boeffla-Kernel 1.0-beta2 (02-04-2015)
Q&A for [KERNEL] [SM-G900F] [Samsung Stock LP] Boeffla-Kernel 1.0-beta2 (02-04-2015)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] [SM-G900F] [Samsung Stock LP] Boeffla-Kernel 1.0-beta2 (02-04-2015). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
led control
Thanks for your amazing kernel. Are you going to enable the led control settings?
On my list for the future, yes.
I tried a lot of kernels for my s5 and got 45k max with ktoon's kernel but this one is just perfect like the battey life is great for the cpu speed that i'm using and i got 47400 points on antutu and it's stable no lag, the features are amazing i love you man keep up the good work don't stop this project.
EDIT= With phone in the fridge i'm getting 49.5k antutu
Guys, I am on a business trip the next 5 days now. Away from my development box. I will follow the thread and answer questions with delays. However I cannot provide any new builds during the next 5 days.
Enjoy the free time ?
Andi
Is running perfect with me!
I confess that I am fully satisfied.
Thanks.
Phone Heating
hi guys, after i flashed this kernel, it seems get heats all the time.
Is there any solutions to solve this?
Thanks guy.
Check if a process is running wild and if your phone enters deep sleep.
Return to default settings if you configured the kernel already.
Andi
Lord Boeffla said:
Check if a process is running wild and if your phone enters deep sleep.
Return to default settings if you configured the kernel already.
Andi
Click to expand...
Click to collapse
Alright, i haven't configured the kernel yet, so i assumed that it's on the default settings.
I will try it once again tonight, let's see the results and i will update you if there is any error occured.
Thank you very much, bro.
Imei null
Im a boa1 user then i flashes this. It went well for a day but the next day my inei gets null and my baseband is unknown. How to fix?
ChardKenn said:
Im a boa1 user then i flashes this. It went well for a day but the next day my inei gets null and my baseband is unknown. How to fix?
Click to expand...
Click to collapse
I wonder why you ask that in a kernel thread.
If you have an EFS backup, try to restore.
Or flash another modem.
I have no clue why your IMEI is null.
Andi
So far the "Governor Nightmare / Profile Standard" combination with "Scheduler Tripndroid" this very good. Would anyone have any other opinion?
I also use this for my tests... Quite happy too...
Andi
working Screen Mirroring
Hello! Installed the latest version of your kernel, and there was a problem I stopped working Screen Mirroring and S Health.How to solve this problem or this is unsolvable?I'm sorry used Google Translation.Thank you.
For s-health you need to clear the app data once in app manager.
Mirror I don't know. Never tried.
But likely this gets broken with custom kernels thanks to Samsung limitations.
Be sure to use latest beta of kernel!
Andi
Hello
You know what settings are good every day, and what to play ?
I'm looking for the optimum governor.
With stock kernel my battery lasts day and a half with this kernel default settings the same. What to do to improve battery life for half a day to have 2 days without losing performances?
tinko975 said:
With stock kernel my battery lasts day and a half with this kernel default settings the same. What to do to improve battery life for half a day to have 2 days without losing performances?
Click to expand...
Click to collapse
Nothing. Miracles are not yet possible.
Either performance, or power. This is pure physics.
You have to compromise.
Andi
Same thing i get with power save option
Yes. If saving battery is all you want, you don't need custom roms or custom kernels necessarily.
Gesendet von meinem SM-G900F mit Tapatalk

[Q&A] [kernel] cm12 sm-t330nu

Q&A for [kernel] cm12 sm-t330nu
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [kernel] cm12 sm-t330nu. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hey Moon!
moonbutt74 said:
okay,
this is built through bliss but seems to do
cm12-kernel-carmilla-linaro-milletwifiue-mb74.zip
https://www.androidfilehost.com/?fid=23991606952595027
Flash in recovery after rom flash. Don't screw it up !
NOTE- for lanscape i recommend setting dpi to 160
I will update my source soon. it is located here
https://github.com/moonbutt74/kernel-milletwifi-choad-warrior
I enjoy calling this my caf-maybe kernel xD
Rotation fixed, i am working this kernel source to see if i can get kexec hardboot functionality working
Please do not ask me questions about overclocking.
This is a temporary offering for @sub77 's LP build for the sm-t330nu milletwifiue
[ROM][UNOFFICIAL][LP5.1.1] CyanogenMod 12.1 Galaxy Tab 4 8.0 [20150430][SM-T330]
http://forum.xda-developers.com/tab-4/development/rom-cyanogenmod-12-1-t3097152
This does not resolve the camera issue but does seem to prevent the reboot which occured before.
Please do not ask me questions about overclocking !
thanks :silly:
m
Click to expand...
Click to collapse
AND MY BOY MULTITASKING PROJECTS NOW. LOL. Is sub77 having the same issue as I am? I get stuck at the samsung launch screen right before my boot animation appears. (If I flash ROM then Kernal) simultaneously through twrp recovery. ---- :\ ----- if I just try to flash the CM 12.1 Unofficial, gives me a soft brick. Trying to look at threads on the issue. It states "cannot find update binary in cm12 file" during some Cm12.1 ROM flash attempts
ThaddNation said:
AND MY BOY MULTITASKING PROJECTS NOW. LOL. Is sub77 having the same issue as I am? I get stuck at the samsung launch screen right before my boot animation appears. (If I flash ROM then Kernal) simultaneously through twrp recovery. ---- :\ ----- if I just try to flash the CM 12.1 Unofficial, gives me a soft brick. Trying to look at threads on the issue. It states "cannot find update binary in cm12 file" during some Cm12.1 ROM flash attempts
Click to expand...
Click to collapse
T,
I use philz recovery, twrp is consistently a giant bag of bugs and i won't touch it..
https://www.androidfilehost.com/?w=files&flid=23544
don't multiflash , do rom, then kernel, then supersu.
m
M
i have seen you posted some issues with MTP mode. i have that problem too and i am using a mac book
regards
Kernel v4
Hey Moon,
Does the 4th version enable over clocking the tablet? In kernel editor I have the option to push the CPU upwards of 1593MHz and the GPU to 533MHz. ! BTW, any new projects? I've been following you and sub77 on this Rom\Kernel but seems like it is getting quiet. I've been fooling around in the system files to see if I can find a fix for this camera. I got rid of Two files in /system/etc/permissions. And had to edit two that I found which were corrupt compared the the other camera files I've been comparing them to. I'm slowly but sure on to something. Let me know if u want to port a Sweet ROM, or Tweak a kernel out, etc. I'm ready!
Thadd.
T,
hi, if you succeed in solving the camera issue, please do a complete detailed write-up on the fix.
For all versions of kernel 2-4 i applied amyren's OC/UV changes , and set ondemand/cfq as default.
I run that kernel in my cm11 build [personal, not release] and it does well, camera up. the break is on the rom side somewhere. [cm12]
i am currently working the LL kernel realease for the sm-t530nu. The kernel for the sm-t330nu [mine] is done.
The source is posted here, https://github.com/moonbutt74/kernel-milletwifi-choad-warrior-rv01
you are absolutely welcome to and encouraged to take it foward, being a bit of a dumb-dumb that's as far as i could get it. :silly:
m

Categories

Resources