hello
can anybody help me please?
i have a german vodofone note 4
he is simlockfree and want to flash an unbranded fw DBT
but when i try to flash i get a error, There is no PIT partition.
can anybody help how to flash?
big thanks
Have you installed the Samsung drivers on your pc?
rcobourn said:
Have you installed the Samsung drivers on your pc?
Click to expand...
Click to collapse
yes but he say There is no PIT partition.
how is that possible?
Not sure. Try different port and cable. Phone is in download mode?
It is working! You have right I must first put the phone to Pc to install drivers now it's is done! Thanks rcobourn
Related
Hey there people from XDA Forums,
I kind of figure I messed my S4 (I9505) up. I tried to flash a DBT-firmware (branding free for Germany) on a phone I got from Switzerland including a netlock. After Odin started I got a write error and now the phone tells me there was an issue please ask Kies about recovery mode. But Kies doesn't recognice my Phone at all. Is there any chance i can get a new working firmware onto it?
greetings
SirHanni said:
Hey there people from XDA Forums,
I kind of figure I messed my S4 (I9505) up. I tried to flash a DBT-firmware (branding free for Germany) on a phone I got from Switzerland including a netlock. After Odin started I got a write error and now the phone tells me there was an issue please ask Kies about recovery mode. But Kies doesn't recognice my Phone at all. Is there any chance i can get a new working firmware onto it?
greetings
Click to expand...
Click to collapse
Hi mate
This is an extract from this thread
http://forum.xda-developers.com/showthread.php?t=2265477
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Flashing firmware from other country should not be a problem , download file again
Where do I find a correct pit file? When flashing PIT is it always nessecary to check repartition in odin?
SirHanni said:
Where do I find a correct pit file? When flashing PIT is it always nessecary to check repartition in odin?
Click to expand...
Click to collapse
Hi
In your case it would be :
File Type: zip I9505_pit file.zip - [Click for QR Code] (1.2 KB, 43344 views)
Is on the thread i posted before , you only check repartition when you use a PIT file , any other case you do not
finally I managed to flash a new recovery and where able to restart the phone. As it seems the problem was my Computer. through the old notebook from my wife it went quite flawless. Now i am back to my original problems. I am on a branded rom with a sim lock and dont like both of it
will it work to just flash the complete firmware from my region? will it overwrite the netlock or where is it located?
Thanks for your help so far
SirHanni said:
finally I managed to flash a new recovery and where able to restart the phone. As it seems the problem was my Computer. through the old notebook from my wife it went quite flawless. Now i am back to my original problems. I am on a branded rom with a sim lock and dont like both of it
will it work to just flash the complete firmware from my region? will it overwrite the netlock or where is it located?
Thanks for your help so far
Click to expand...
Click to collapse
Hi,
Glad you manage it to work.
Flashing a new firmware will not network unlock you phone , use to be possible to do it using this guide:
http://forum.xda-developers.com/showthread.php?t=2282683
not anymore as far as i know , you will need an unlock code.
yeah, tried this one allready, but after key input I dont get a new menu. I guess this method is not working for newer austrian firmwares
SirHanni said:
yeah, tried this one allready, but after key input I dont get a new menu. I guess this method is not working for newer austrian firmwares
Click to expand...
Click to collapse
No, i think the only way is with a unlock key..........
got myself a key and everything works fine now! thanks a lot for the help and inspiration.
SirHanni said:
got myself a key and everything works fine now! thanks a lot for the help and inspiration.
Click to expand...
Click to collapse
Any time mate..that is why we are here for
Hi
i have a 32gb s4 i9505 which wont boot in to os it stops at the samsung galaxy s4 gt-i9505 screen & stops
i can get into recovery also download mode but odin wants pit file ive tried a few pit files with no success
when in download mode i get some small writing at top left of screen (see image attached)
i dont know if phone is locked or not
any help would be gratefully appreciated
vattmann said:
Hi
i have a 32gb s4 i9505 which wont boot in to os it stops at the samsung galaxy s4 gt-i9505 screen & stops
i can get into recovery also download mode but odin wants pit file ive tried a few pit files with no success
when in download mode i get some small writing at top left of screen (see image attached)
i dont know if phone is locked or not
any help would be gratefully appreciated
Click to expand...
Click to collapse
What did you do before this all of this happened? You need to be very careful with PIT files, it is a sure way to brick your phone if not done right or with the incorrect PIT file. Usually, loading a PIT file is your absolute last resort.
Z-Blade said:
What did you do before this all of this happened? You need to be very careful with PIT files, it is a sure way to brick your phone if not done right or with the incorrect PIT file. Usually, loading a PIT file is your absolute last resort.
Click to expand...
Click to collapse
Hi
the phone is a ebay purchase so no idea whats been done to it i tried an official stock rom with odin but its odin that asks for a pit file
this is the rom name I9505XXUFNB8_I9505BTUFNB3_BTU and this is the pit file i tried CSB_signed_Fusion3_EUR_0325_V2.
i know it a 32gb version checked the imei for infdin gives a fail even tried to flash rom through recovery from sd card but all that happens is at bottom of screen i get "install/sdcard" for a few mins then it reboots to the samsung galaxy s4 gt-1905 screen where it hangs
permantly till switch off
vattmann said:
Hi
the phone is a ebay purchase so no idea whats been done to it i tried an official stock rom with odin but its odin that asks for a pit file
this is the rom name I9505XXUFNB8_I9505BTUFNB3_BTU and this is the pit file i tried CSB_signed_Fusion3_EUR_0325_V2.
i know it a 32gb version checked the imei for infdin gives a fail even tried to flash rom through recovery from sd card but all that happens is at bottom of screen i get "install/sdcard" for a few mins then it reboots to the samsung galaxy s4 gt-1905 screen where it hangs
permantly till switch off
Click to expand...
Click to collapse
Try a
Different USB cable
Different PC
Different USB port
Different Firmware.
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Try a
Different USB cable
Different PC
Different USB port
Different Firmware.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
will try a different setup this evening after work just dont know what rom to use as you may tell from the pic its not on official firmware
dont know whether to try and flash custom recovery...is there a official pit file for the 32gb version s4 ?
vattmann said:
will try a different setup this evening after work just dont know what rom to use as you may tell from the pic its not on official firmware
dont know whether to try and flash custom recovery...is there a official pit file for the 32gb version s4 ?
Click to expand...
Click to collapse
Flashing pit files should be the last resort after failing the proper flashing of the official firmware.
Uneducated flashing of pit files can lead to a hardbrick.
That is why I said. Try flashing the official firmware from a different pc. Or use a different data cable. Or change everything.
Still if the pit error occurs, then flash put and then the official firmware.
Download the official firmware from here
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Flashing pit files should be the last resort after failing the proper flashing of the official firmware.
Uneducated flashing of pit files can lead to a hardbrick.
That is why I said. Try flashing the official firmware from a different pc. Or use a different data cable. Or change everything.
Still if the pit error occurs, then flash put and then the official firmware.
Download the official firmware from here
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the replys and help im glad to say that the phone lives once again new cable different pc (laptop) latest btu rom 3.04 odin
some very tense minutes felt like longer and she boots up and works as it should many many thanks to the community of xda:good:
vattmann said:
Thanks for the replys and help im glad to say that the phone lives once again new cable different pc (laptop) latest btu rom 3.04 odin
some very tense minutes felt like longer and she boots up and works as it should many many thanks to the community of xda:good:
Click to expand...
Click to collapse
Press thanks than say
Sent from my GT-I9500 using XDA Free mobile app
I tried to root my device (Samsung Galaxy Note 3 SM-N9005) and it went quite well.
Then I tried to flash a custom rom (Darkwolf S7 edge port) on my phone but I ended up in a bootloop where it was stuck on the samsung logo for hours.
I tried different stuff to get out of it but nothing worked so I decided to flash the stock rom onto my phone and at the odin status I get "FAIL". And on my device it shows "Volume Size is too big 4620289 < 4718599. And my phone is unusable. I need some help asap to fix it.
Please Help!!!
What is the phone model?
You used a stock ROM from sammobile.com in Odin?
audit13 said:
What is the phone model?
You used a stock ROM from sammobile.com in Odin?
Click to expand...
Click to collapse
My phone is a Samsung Galaxy Note 3 SM-N9005.
Yes,I used a stock ROM from sammobile.com in Odin.
But I get "FAIL!" over and over again...with the message,"Volume size is too big......",on my phone.
Have you tried using different version of Odin, different USB cables, and USB ports? You may need to flash the stock ROM with a pit file.
audit13 said:
Have you tried using different version of Odin, different USB cables, and USB ports? You may need to flash the stock ROM with a pit file.
Click to expand...
Click to collapse
I've tried everything except for using a pit file. I don't really know much about using a pit file so I'm a bit apprehensive.
Could you help?
I have the exact same problem, but without the volume thing, I need help!
BarryAllen97 said:
I have the exact same problem, but without the volume thing, I need help!
Click to expand...
Click to collapse
Hey there Flash!! xD
Its a pain..isn't it?
Anyway I figured out how to fix the phone finally...
You'll need to flash the custom ROM with the PIT,CP,AP, and CSC files.
Here's the link...http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
>Download the file suitable for your phone and specific model...Extract those files.. BE VERY CAREFUL TO CHOSE YOUR SPECIFIC MODEL!!!
>Launch Odin...
>Put you phone in Download mode and connect it...
>Load the PIT,CP,AP and CSC files in their respective slots..
*DON'T FORGET TO CHECK THE "RE-PARTITION" OPTION*
>And then hit the "start" button and pray...IT WORKS!!!
However this will erase EVERYTHING on your phone...all the user data...if you have some photos/videos/songs/EVERYTHING...your sd card should be safe though.
I hope this works for you...it worked for me..
Let me know if it does!! Have a nice day!!
kurosaki999 said:
I've tried everything except for using a pit file. I don't really know much about using a pit file so I'm a bit apprehensive.
Could you help?
Click to expand...
Click to collapse
..
audit13 said:
Have you tried using different version of Odin, different USB cables, and USB ports? You may need to flash the stock ROM with a pit file.
Click to expand...
Click to collapse
hey thanks man...it did help..
flashed the stock rom with the pit,ap,csc files and finally got out of the bootloop..
I really appreciate the help!
I tried downgrading after looking everywhere for a possible problem with odin.. I was on the latest cpg2 and odined the bp1 firmware for 5.1 and it stuck on rpm or something like that forgive me but i cant recall..I pulled it after 20 min and then got a software update error..and no matter what firmware i tried to put on its stuck on get pit for mapping.. My computer sees it as a device MSM8960.. So kies ng. Odin works but cant pass pit Please anyone i know with latest update I should not of done this..I even tried latest firmware it was on but same error
davekaz said:
I tried downgrading after looking everywhere for a possible problem with odin.. I was on the latest cpg2 and odined the bp1 firmware for 5.1 and it stuck on rpm or something like that forgive me but i cant recall..I pulled it after 20 min and then got a software update error..and no matter what firmware i tried to put on its stuck on get pit for mapping.. My computer sees it as a device MSM8960.. So kies ng. Odin works but cant pass pit Please anyone i know with latest update I should not of done this..I even tried latest firmware it was on but same error
Click to expand...
Click to collapse
Restart pc and try latest firmware again
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82[/QUOTE
Thanks again
placing a specific pit fit got me pass map and now gets stuck at hlo bin.. I think the downgrade firmware changed something cause windows sees phone as device called msm8960 . Odin sees it as far as a com port but beyond that its not a 910v anymore
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82[/QUOTE
Thanks again
placing a specific pit fit got me pass map and now gets stuck at hlo bin.. I think the downgrade firmware changed something cause windows sees phone as device called msm8960 . Odin sees it as far as a com port but beyond that its not a 910v anymore
Click to expand...
Click to collapse
Try different odin version and different usb cable
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Trex888 said:
Try different odin version and different usb cable
Click to expand...
Click to collapse
I tried several versions of odin and its definitely not cord
Thanks again
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
davekaz said:
I tried several versions of odin and its definitely not cord
Thanks again
Click to expand...
Click to collapse
Try this method if your bootloader is unlocked or you got developer edition n910v.
Flash twrp in odin
Make complete wipe 3× 3 times
(dalvik cache/data/cache/system/internal storage)
After wipe go to download mode
Close odin and open again as (run as administrator)& upload firmware (AP)
Hit start Flash firmware
After flash firmware DONT LET THE PHONE BOOT
go to recovery
Wile cache & data factory reset
Reboot & wait 5 to 10 minutes.
Report back
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Trex888 said:
Try this method if your bootloader is unlocked or you got developer edition n910v.
Flash twrp in odin
Make complete wipe 3× 3 times
(dalvik cache/data/cache/system/internal storage)
After wipe go to download mode
Close odin and open again as (run as administrator)& upload firmware (AP)
Hit start Flash firmware
After flash firmware DONT LET THE PHONE BOOT
go to recovery
Wile cache & data factory reset
Reboot & wait 5 to 10 minutes.
Report back
Click to expand...
Click to collapse
thanks for trying but I just bought the phone and was trying to downgrade to unlock..so dont think twrp will take..
I appreciate all you help but im screwed
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
Did you solve your issue?
Click to expand...
Click to collapse
I did it..! SOLVED..!
alca00 said:
davekaz said:
Did you solve your issue?
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
I did it..! Using this repair firmware, I have repaired my Samsung N910V. Many thanks to Trex888..! I just flashed it by Odin using this file, and I hope this can help others with same issue (soft bricked Note4 N910V).
Thanks a lot again Trex888..!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
alca00 said:
alca00 said:
Trex888 said:
I did it..! Using this repair firmware, I have repaired my Samsung N910V. Many thanks to Trex888..! I just flashed it by Odin using this file, and I hope this can help others with same issue (soft bricked Note4 N910V).
Thanks a lot again Trex888..!
Click to expand...
Click to collapse
Congrats ! Glad to hear that .
Click to expand...
Click to collapse
Click to expand...
Click to collapse
alca00 said:
davekaz said:
Did you solve your issue?
Click to expand...
Click to collapse
yes it was the damned usb cord..Lol everything went smooth after that
Thanks to all
Click to expand...
Click to collapse
I had same issue, fail on all firmware (Verizon Note 4), changed usb cord, flashed back to stock and was even able to downgrade (5.0.1).
Pls help me out guys.....my two weeks old samsung note 4 is stock on Software Update Failed
Your device didnt update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update.
My phone details:
Model: SM-N910V
SKU: SMN910VZKE
Thanks.
Does anyone have this file? The page is dead.
Dear all,
i got a samsung Note 4 . Device had a sticker SM-910 F with matching imei on software. One day I hard rest my device then it imei shows Null and it became restart after 1 to 2 minutes in lop. this device has Verizon mother board. and also do not show the usb cable option. I want to install Verison stock firmware but no device detected in odin. Kindly anyone help me to install firmware through SD
Sumupali said:
Dear all,
i got a samsung Note 4 . Device had a sticker SM-910 F with matching imei on software. One day I hard rest my device then it imei shows Null and it became restart after 1 to 2 minutes in lop. this device has Verizon mother board. and also do not show the usb cable option. I want to install Verison stock firmware but no device detected in odin. Kindly anyone help me to install firmware through SD
Click to expand...
Click to collapse
A 910F with a Verizon mobo?
Might be tricky to flash.
You can access download mode?
Tried different cables / USB ports?
I really doubt that you can flash stock ROM from SD when phone is boot looping.
Maybe with terminal but you would have to flash TWRP for that first.
Hi,
i have a Samsung S 7 Edge
i tried to flash ROM with Odin and I never succedd.
i have done a lot of manipulations and i never successeed
can you help me please?
(i don't know how to send you an attached filed)
Regards
Merci
T.
trazomtg said:
Hi,
i have a Samsung S 7 Edge
i tried to flash ROM with Odin and I never succedd.
i have done a lot of manipulations and i never successeed
can you help me please?
(i don't know how to send you an attached filed)
Regards
Merci
T.
Click to expand...
Click to collapse
i dont own a s7 but i think you shouldnt download custom roms via odin but from twrp... But do you mean stock rom then yes use odin. Find your firmware on sammobile and unzip it and use the .tar file on odin while your phone is connected on the pc with download modus and then click start it will reboot and then youve got your stock rom..
2gg1 said:
i dont own a s7 but i think you shouldnt download custom roms via odin but from twrp... But do you mean stock rom then yes use odin. Find your firmware on sammobile and unzip it and use the .tar file on odin while your phone is connected on the pc with download modus and then click start it will reboot and then youve got your stock rom..
Click to expand...
Click to collapse
Is it possible that ma cable is the problem? when i connect it to launch the battery i have a lot of problems of connection
trazomtg said:
Is it possible that ma cable is the problem? when i connect it to launch the battery i have a lot of problems of connection
Click to expand...
Click to collapse
Yes its possible. Have you installed the samsung usb drivers?
2gg1 said:
Yes its possible. Have you installed the samsung usb drivers?
Click to expand...
Click to collapse
yes i did
trazomtg said:
yes i did
Click to expand...
Click to collapse
it works!! thaht was the cable
trazomtg said:
it works!! thaht was the cable
Click to expand...
Click to collapse
youd be surprised at how often its the cable. We always suggest to use the factory cable when available and a very high quality aftermarket when the factory one isnt available. Different computer, different firmware etc etc etc. Glad you got it working via the power of helpful people on this forum!