Hello xda,
I, as I imagine many other people in this forum, love hearing my music while driving. It's soothing, makes the ride easier and all in all can be a great experience. However, things can always get better.
I'm using my Galaxy Note 3 along with Poweramp music player and no additional SoundFX or anything. Poweramp is adjusted in the "Bass and Treble" preset, bass is halfway up, treble is 3/4 and StereoX is halfway up as well. Sound is pretty nice and bass is nice as well, however, I feel that the sound could be waay better than what it currently is, I love a nice, booming feeling bass (none of that cracking bull) but it lacks in that department.
My car has a simple radio with AUX entrance and 4 pretty normal speakers, I know this will certainly limit my experience and I currently do not have the resources to improve this aspect of my audio, but I was wondering if anyone here had reached a good setup or preset for listening music in your car's audio that you would like to share. I would be very glad to hear about your experiences and current setups.
SoundFX apps, Music player apps, Equalizer presets... all that stuff. I'm looking for a nice clean booming bass and clean trebles, not interested in distortion or drowning the higher pitched noises in exchange for lows. Share with us!
Just in case anyone came across this thread and was interested in improving the sound experience of your low-end car audio system. I found a very good mix for my phone. Clean punching bass and great treble. Remember that most likely it will not sound the same in your vehicle due to all the variables involved. But give it a try nonetheless.
Viper4Android settings (thanks to yung40oz84 for most settings, I just made minor changes. http://forum.xda-developers.com/att-htc-one-m8/general/viper4android-settings-low-car-speakers-t2929697):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Used PowerAmp. Equalizer is FLAT, bass and treble 1/3 way up. No StereoX. Limit enabled. Remember to disable direct volume control and enable musicFX in Poweramp.
When playing music, go to Viper4Android, go in menu and tap "Driver Status".
In processing it must say Yes. Otherwise, V4A is not working. Try enabling compatible mode and rebooting.
Related
Thought you focus owners might find this useful as well:
http://forum.xda-developers.com/showthread.php?t=1342622
I made it easier for Focus owners (rather than bouncing on Omnia 7 threads/wiki).
To increase overall loudness of the phone (Focus/Omnia7):
Run Diagnosis, type *#0002*28345# to get to the "Sound Tuning" menu.
Locate "Device Gain" (lower part of the screen)
The first value identifies the output. Legend:
2 - ear speaker (call)
5 - headphones
7 - back speaker (default shown)
Standard values for a Focus AT&T/Rogers are:
2 600 -1600
5 400 -1100
7 1200 -500
(you can check by entering the device number and pressing Get).
Suggested values in the Omnia thread (to improve loudness):
2 1000 -1600
5 1200 -1200
7 0 -500
For my AT&T/Rogers focus, only 5-headphones seem to work (it's louder).
Anyone else?
On another note, Roger's speakerphone seems a tad louder that AT&T's, on the default values...
Here's an image for visual reference:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Don't forget to thank ballajalla for his post!
Good idea I wish more people used the different devices wiki's though, makes it so much easier to find useful information.
I stand corrected! (Back) Speaker is also louder, not just headphones as I originally stated. However, NOT if you play in Zune!
So: alarm sounds, notifications, calls/ringtones ARE louder, but playing a song or video in Zune is the same audio level as before! Maybe playing in Zune is on another Device gain value? (different from 2, 5 or 7)
I still don't see a difference in call loudness but that might be me
Everything sounds much better except for Zune video for me as well. Actually playing a movie trailer in an app like Flixster is terrible too. If my volume is under '12' I can't hear anything...have to turn it to max (30) to hear. I would love the values to adjust volume for video playback if there are any. Also has anyone noticed any improvement with sound auxiliary out to a car stereo? That volume seems extremely low also.
Has anybody been able to increase bass through this diagnosis app?
Sent from my HTC Flyer P510e using Tapatalk
Hey all. I wanted to make this thread for us audiophiles to share our Equalizer settings through the Google Play Music app and give people some general guidelines for optimal sound settings. While there is no real format to this, if you decide to contribute, please try to include:
Headphone type (earbuds or headphones)
Brand of headphones/earbuds (if you can)
Type of music
Screenshot of settings
For me, I listen mainly to metal and hip hop. And when I say metal, I don't mean Judas Priest or Black Sabbath. I'm talking about the newer generation of metal with weird noises and breakdowns (ALL THE BREAKDOWNS). I want my music to be as heavy as possible, so I lean more towards heavy bass and cranked treble which offers extremely clarity to the instruments. The vocals take a bit of a hit and almost get drowned out, but I'm still trying to find a way to balance everything. If there are any fellow metalheads here, please feel free to help out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 5 using Tapatalk
In google play music there was a beep sound in between the songs.and songs change automaticaly.please help me to resolve this problem...my mobile is moto g4 plus
"newer generation of metal with weird noises and breakdowns "
That's not metal... That's mallcore.
But anyway, my settings depend on which earphones I use. Usually, I go for a scooped setting, the mids are set to flat or a little below. If I use my AKG Q460 I might even turn of the EQ, since they are more balanced than in ear headphones.
My bass boost is set at maybe 1/4 and the surround is off.
Other in ear phones I use are aJays 5, Samsung HS3303 and Motörhead Overkill. The aJays and Overkill have a bit more treble than the Samsung ones which I find more balanced and they fit better in my ears as well. But right now I go with the aJays.
Being a bit of an audiophile myself. I am very happy using Viper4Android cabled to my headphone amp. I keep the settings simple enough not to drastically change the sound but to enhance my experience with my IEMs.
Hi all-
at one time I was interested in converting a tablet into a head unit, but lacked the know-how so I finally just bought one from ali express and installed it; android 4.4 and I can't post links so you can
use the ali search and enter: 2 DIN Android 4.4 7 Inch Bluetooth Audio In Dash to find the specific unit that looks like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For the most part, it's great- but I have two questions that would make it even better
(1) I can play music and audiobooks (two different apps) over bluetooth, and the audio is perfect. When I get bluetooth calls though, it starts with a blast of static and then nothing- I assumed it was a mic or feedback problem, but I just played a voicemail recording from the phone AT&T "visual voicemail" app, and it did the same thing even though that is just playing a recording and shouldn't be using the mic at all. Does anyone know what if there is some other difference between 'audio out' apps that might cause some to work find, and others to have problems? There are rear ports for audio input, but I don't think those replace the mic, so for now I'm stuck with external troubleshooting (I'm not ready to take it apart and start doing surgery on the unit)
[EDIT: it also plays the audio from Google Maps with no problem]
(2) The unit has a very long splash screen- so long, that I can get out my 150' driveway and down the block before it goes away and allows BT to connect to play my audiobooks. I looked through the menus but haven't found a way to shorten that screen. I realize this may require rooting if it is not a publically available setting. Where should I be looking (or is it stored in a file somewhere?), and if rooting is required, how does a newbie like me figure out the best options for rooting, preferably leaving the rest of the OS as-is so I don't accidently jack up the reverse and forward camera functions, etc?
I'm not a frequenter of XDA, but this seems to be the most knowledgable place for this type of thing- so I appreciate you pointing me in the right direction
Many thanks!
Cap
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I bought this radio on Black Friday of 2017 and ever since then it seems like it has just been one headache after another. I've done Desktop Support, been a NOC engineer, and currently pursuing my OSCP so I'm not computer illiterate; yet this makes me feel like I am. One of the things that interested me was the 10-band stock EQ. Then that was removed. Fine, I'll go to V4A. Nope. That doesn't work anymore. I knew beforehand that some of the buttons on the face wouldn't do what they stated they'd do but the option to reprogam them in the Joying settings only works on touchscreen buttons, not physical ones. The radio is fine. Just fine, could be better. Basically here's a short list of what I'm trying to do. I've tried more apps, APKs, and reflashes in the past few months than I can even begin to remember. I don't care how much effort this takes to get it going, as long as it just works. I don't know if what I'm asking for is even possible but at this point I'm tired of going in circles.
-A good, 10-band, virtualizer EQ that works on the entire unit. Something that will affect every bit of audio played.
-A way to reprogram the front-facing buttons.
-Preferably a better radio with HD funtionality
-A quick way to tether internet to the device. (I was using Bluetooth Tethering PRO but it made the unit super slow and unresponsive at times. Ideally gain connection by just plugging my phone into the USB connector but any way will work. I can't seem to get it to function. I'm on Verizon, which from what I've read restricts stuff like that.)
-A car launcher that keeps all functionality. (I was using Car Launcher AG but then I lost all functionality of the Bluetooth player unless I spammed source until I landed on it. Choosing BT Music only took me to the pairing screen.)
-Is there a way to replace stock apps? Like say I found a better app and wanted to replace a stock selection when Source scrolls through, could I do that? Like the Aux app for instance that has a video feed on it for no discernible reason
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Oi, mates!
After browsing the interwebs for a couple of days in order to find a good Viper4Android profile for Apple AirPods, I ended up empty-handed so I decided to make my own profile aiming to be universally better with as many different genres of music as possible.
As usual, here's a warning you likely won't read:
I am not responsible for your damaged AirPods, ears, phone speakers blowing up or if your software decides it doesn't like you. If you come here and tell me I broke something of yours, I'll tell you to sod off. You're responsible, not me.
Click to expand...
Click to collapse
Having that out of the way, let's get into the details because that's what you came for anyway.
The profile is the result of a couple of days of adjusting and fine-tuning the Viper4Android Bluetooth profile so it matches the AirPods. While AirPods are similar in design to the old, wired Apple EarPods, the hardware differs greatly making old profiles obsolete for the modern hardware. If you still want to use this profile for EarPods or other hardware, go ahead but it will likely sound like ****e as this is a very specific profile.
I've tested this profile numerous times with everything from Vocaloid music to polish Disco Polo and out of 135 songs only 2 sounded odd in some way making this a very universal profile that should work for most people.
The profile mainly adjusts the equaliser as well as Viper Bass and Viper Clarity, but it does have some other settings to give the sounds a bit more "oomph". You can play around with the settings but I don't think there's much more that can be done as I really played around with everything possible and any changes just make it sound worse in my opinion, but you may disagree and it's your device after all so do as y'all please.
To get the best effect out of your AirPods make sure to disable absolute volume in developer settings, otherwise, the headphones will be very quiet. I also recommend AirBattery which doesn't affect the audio quality but fills in the gaps regarding functionality with AirPods on Android. Check it out for yourself.
Lastly, enjoy.
Do you have a profile for V4A 2.7? Or screenshots of your settings to recreate the profile?