Database Users

vz 1060 dev &*^()(**^

I am unlocked
fast boot still works
ok I downloaded the OTA
went to root it and everthign went to hell
the recovery dlahed but would nto entere recoivery
tried a couple differnt twrp
tried cwm
tried other 5.1 recovereis after verifying that they had the same sizes
still wont entere recovery
treid to use the kk factoryu image and "most of it flashed
Code:
(bootloader) Variable not supported!
target max-download-size: 768MB
sending 'partition' (32 KB)...
OKAY [ 0.249s]
writing 'partition'...
FAILED (remote failure)
finished. total time: 1.114s
C:\Users\Zookeeper\Desktop\android_sdk\XT1060 Moto X\VZW_212.56.26.ghost_verizon.Verizon.en.US>fastboot flash motoboot motoboot.img
(bootloader) Variable not supported!
target max-download-size: 768MB
sending 'motoboot' (1604 KB)...
OKAY [ 0.383s]
writing 'motoboot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.137s
flashed a different boot image and moto boot image form 5.1 t mobile
still no joy
there is a brazil 1053 which I am told Mosley works. but I cant find it
no 1060 factory image yet.
so has anybody created a factory type image yet. NOT a flashable zip. unless I can get twrp working that wont help me.
FAST BOOT WORKS

I'm not 100% sure, but you may have to use "mfastboot" which is the motorola version of fastboot. You can find it with a quick search.

So you were on 5.1 and downgraded to Kit Kat? You can't downgrade the bootloader.

dcooterfrog said:
I am unlocked
fast boot still works
ok I downloaded the OTA
went to root it and everthign went to hell
the recovery dlahed but would nto entere recoivery
tried a couple differnt twrp
tried cwm
tried other 5.1 recovereis after verifying that they had the same sizes
still wont entere recovery
Click to expand...
Click to collapse
I'm going to stop you right there,.
To install an OTA, you need STOCK reocvery. If you have a 3rd party recovery like TWRP or CWM, the OTA process might reboot your phone into Recovery but it will fall to install.
If you have 4.4.4 on your phone, you need to get that exact Recovery.img and flash it. You can't use a 5.1 recovery because the pre-flash validation checks that happen as part of the OTA will likely complain that its not the right version.
dcooterfrog said:
treid to use the kk factoryu image and "most of it flashed
Code:
(bootloader) Variable not supported!
target max-download-size: 768MB
sending 'partition' (32 KB)...
OKAY [ 0.249s]
writing 'partition'...
FAILED (remote failure)
finished. total time: 1.114s
C:\Users\Zookeeper\Desktop\android_sdk\XT1060 Moto X\VZW_212.56.26.ghost_verizon.Verizon.en.US>fastboot flash motoboot motoboot.img
(bootloader) Variable not supported!
target max-download-size: 768MB
sending 'motoboot' (1604 KB)...
OKAY [ 0.383s]
writing 'motoboot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.137s
flashed a different boot image and moto boot image form 5.1 t mobile
still no joy
there is a brazil 1053 which I am told Mosley works. but I cant find it
no 1060 factory image yet.
so has anybody created a factory type image yet. NOT a flashable zip. unless I can get twrp working that wont help me.
FAST BOOT WORKS
Click to expand...
Click to collapse
You can't downgrade from 4.4.4 to 4.4.2 without risking turning your phone into a brick.
What state is your phone in now? WHat bootloader version does it have on it?
If you have bootloader 30.B7, consider downloading the 4.4.4 XT1060 SBF/FXZ moto has on their web site, and visit -> http://forum.xda-developers.com/moto-x/general/faq-how-to-prepare-ota-update-carriers-t3126425 read post 1 and 2... From Post 2, use the Requirements section, then skip to option 5 to get to stock 4.4.4. then try the OTA

ok lest start over
i was rooted with twrp
i returned to stock and flashed system and recovery from
VZW_212.56.26.ghost_verizon.Verizon.en.US
took both OTAs got onto lolipop seemd to be working
went to flash twrp it said flashed OK
but I could not boot into recovery
tried to laod a cuple differnt recoveries.
then tried to restore the whoel thing
VZW_212.56.26.ghost_verizon.Verizon.en.US
gpt failed
recovery failed
then I tried to install a recovery boot and moto boot frfom a different 5.1. ( after verifying that a couple 5.1 roms had the same size moto boot and boot) flashed but gpt is messed up and wont restore.
either I have broke it or I need a factory image from lollipop
i will try to check my boot loader version. but i bet its updated as a resultof th OTA

got twrp working
does any one have a complete nanadroid of verizon lolipop

got twrp working
does any one have a complete nanadroid of verizon lolipop
slowly am getting back up.
i am not at VZW_212.55.26.ghost_verizon.Verizon.en.US
not 56
Blur_Version.212.166.3.ghost_verizon.Verizon.en.US seems to fail.
ill try flashing system and recovery again.
flashd system, revcovery, boot and motoboot
moto boot failed
update unsuccessful so somthing in moto boot muts ba failing the assert. I think I have a NEWER moto boot.

How did you get TWRP working under 5.1? Someone else had similar issues here:
http://forum.xda-developers.com/moto-x/moto-x-qa/xt1060-recovery-5-1-t3201391

Well that was me... Eventually I got twrp working but I don't know what kind of bastard kitkat lolipop Frankenstein thing it was. Phone will not boot. It is on its way back to motorolla
Sent from my Venue 8 7840 using Tapatalk

Hey bud, when you say the phone won't boot do you mean you can't even boot into the bootloader, or do you mean the screen goes black after the boot animation?
If it's the latter the same thing happened to me today and I know how to fix it.

Won't boot. It went back to Motorola yesterday. Love extended warranty. Backup phone droid incredible 1 with KitKat . loving the 3g
Sent from my ADR6300 using Tapatalk

dcooterfrog said:
Won't boot.
Click to expand...
Click to collapse
I was asking you to clarify what you meant by "won't boot" since that could mean multiple things, but it doesn't matter if you already sent the phone back. Glad you have the extended warranty.

yes extended warranty is great.
sorry by wont boot i meant complete brick, not boot loop. no boo tlogo, no motorolla logo, no bootloader unlocked warning screen. just dark dead, as a doornail.
it wold not even get int eh boot loader.
i have never bricked a phone before. i want trying to downgrade. i have been rooting ( the hard way) since eclair on my lg ally, so not a newb.

Blasted kingroot - bricked my phone?

Ahh, hind sight is a wonderful thing.
After trying to use kingroot to get root access, it failed. And a few days later after rebooting.
I'm now stuck at bootup with Start Up Failed.
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
I've now tried lot's of different things, over the last few hours.
RSDLite (show device brings no thing up)
Unlock bootloader (request key, but error regarding OEM unlock not being set - no access to now set it LOL)
Downloaded stock X_Play_UK_Retail_XT1562_LPD23.118-10_CFC.xml.zip, and tried using various guides on fastboot but keep getting remote failed.
I'm on stock recovery (obviously still locked).
Any thoughts, or hope from anyone?
Obviously, not sure what support Motorola would provide for what is essentially my own fault?

Have you tried manually flashing each bit of the stock firmware/image. That might help. There's a good guide here which I followed to unbrick my device. Just follow the instructions http://theunlockr.com/2015/09/22/how-to-unroot-the-motorola-moto-x-play/

Or try this one.
http://forum.xda-developers.com/showthread.php?t=2499926

Tried the first fastboot oem lock begin but get ... (althought my phone is locked already)
(bootloader) Not supported command in current status!
FAILED (remote failure)
finished. total time: 0.063s
So stepping to next command, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash partition gpt.bin
(bootloader) has-slotartition: not found
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.166s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.078s

sharebubbles said:
Tried the first fastboot oem lock begin but get ... (althought my phone is locked already)
(bootloader) Not supported command in current status!
FAILED (remote failure)
finished. total time: 0.063s
So stepping to next command, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash partition gpt.bin
(bootloader) has-slotartition: not found
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.166s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.078s
Click to expand...
Click to collapse
I think you need to unlock the bootloader and then start with the 'fastboot oem lock begin' command. You can't flash a system image with a locked bootloader. Let me know how it goes!

DTLblaze said:
I think you need to unlock the bootloader and then start with the 'fastboot oem lock begin' command. You can't flash a system image with a locked bootloader. Let me know how it goes!
Click to expand...
Click to collapse
I run the unlock command, with my unique key but I get ..
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.013s
And since I can't get into the phone, I can't therefore check the "allow OEM unclock"

Have you tried any erase data commands or reset commands? Perhaps you could reset the phone so kingroot is un-installed and then try to turn on the phone. Short of that I'm stuck for ideas really, accept booting into 'fastboot and then erasing all data and factory reset in there. Let me know.

DTLblaze said:
Have you tried any erase data commands or reset commands? Perhaps you could reset the phone so kingroot is un-installed and then try to turn on the phone. Short of that I'm stuck for ideas really, accept booting into 'fastboot and then erasing all data and factory reset in there. Let me know.
Click to expand...
Click to collapse
I tried the wipe data/factory reset and wipe cache partition from the stock recovery.
And if I try from fastboot:-
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase userdata
(bootloader) has-slot:userdata: not found
erasing 'userdata'...
OKAY [ 0.196s]
finished. total time: 0.198s
And then a fastboot reboot.
Back to the now standard "start up failed"
And the
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot reason: Fall-through from normal boot mode

Sickaxis79 said:
Or try this one.
http://forum.xda-developers.com/showthread.php?t=2499926
Click to expand...
Click to collapse
Have downloaded, and tried that - but the crux appears to be the fact that my bootloader is locked and I can't access the OEM checkbox. And therefore the tool itself can't unlock or equally install TWRP.
Unless I'm missing something in it's usage.

sharebubbles said:
I tried the wipe data/factory reset and wipe cache partition from the stock recovery.
And if I try from fastboot:-
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase userdata
(bootloader) has-slot:userdata: not found
erasing 'userdata'...
OKAY [ 0.196s]
finished. total time: 0.198s
And then a fastboot reboot.
Back to the now standard "start up failed"
And the
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot reason: Fall-through from normal boot mode
Click to expand...
Click to collapse
That really does sound like you bricked the device. If you where on lollipop software you wouldn't have the issue with check bootloader OEM unlock. If it was me I would either contact Motorola or go to a repair shop and have a motd experienced person take a look at it.

Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.

sharebubbles said:
Have downloaded, and tried that - but the crux appears to be the fact that my bootloader is locked and I can't access the OEM checkbox. And therefore the tool itself can't unlock or equally install TWRP.
Unless I'm missing something in it's usage.
Click to expand...
Click to collapse
Strange. This is the tool I used to unlock my bootloader.

drmuruga said:
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
Click to expand...
Click to collapse
I've ben used the latest rom so far why trying to flash (and failing) when I look at recovery I have a LPD23.118-10 number that matches to an earlier 5.1.1 rom (I had been upgraded to 6.0.1 via OTA updates) - do I therefore take that LPD ID to mean that I should actually use the 5.1.1 rom - I'm in the UK, so I'm assuming I'd use the UK one rather than Europe (I'm looking at roms on https://github.com/motoxplay/stock).
Thanks

Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)

sharebubbles said:
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
Click to expand...
Click to collapse
And also never try kingroot.

sharebubbles said:
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
Click to expand...
Click to collapse
Most in the threads suggesting using rsdlite or manual flash/root and you decided to use kingroot,haha.
Welcome back.

Guys I have been searching EVERYWHERE on how to unbrick my moto x play, I used kingroot and it bricked, been a week and I TRIED everything. CAN ANYONE HELP PLEASE!!!!!!
---------- Post added at 05:26 AM ---------- Previous post was at 05:14 AM ----------
Guys I have been searching EVERYWHERE on how to unbrick my moto x play, I used kingroot and it bricked, been a week and I TRIED everything. CAN ANYONE HELP PLEASE!!!!!!
Tried restoring it, deleted everything and the phone is still on bootloader (LOCKED) and i dont even know how to fix it, I know nothing on how to root, friend suggested it, downloaded it, installed it, didnt work and then i restarted my phone and now its stuck on bootloader screen and the screen has the message "Start up failed: your device didnt start up successfully. Use the software repair assisstant on computer to repair your device. Connect your device to your computer to get the Software Repair Assistant." <- Downloaded it, tried it and it was stuck on 6% on repairing, left it over night and it was still on 6%.
ALSO under the message "AP Fastboot Flash Mode(Secure) is there)

Hai same problem for my moto x play ple.......s help contact.7708892303(WhatsApp no.)

pravin kkr said:
Hai same problem for my moto x play ple.......s help contact.7708892303(WhatsApp no.)
Click to expand...
Click to collapse
Download and flash this firmware
https://mega.nz/#!H5YlDCrD!T8tAAW7nHVS-erizRiqg5-Yp_p23hKParMjjHD4diQA credits @kumeipark
Use RSD lite to flash the firmware
http://rsdlite.com/rsd-lite-download/
Moto drivers
http://motorola-mobility-en-in.custhelp.com/app/answers/detail/a_id/88481
If you have problems installing device drivers using Windows 8.1 or Windows 10 follow this guide
https://www.youtube.com/watch?v=gmw86KplqmU
And don't post your contact no. in public forums for everyone to see.

what is the decryption key for the mega link
drmuruga said:
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
Click to expand...
Click to collapse
provide the decryption key

MOTO X PLAY XT1562 Bricked

I accidentally bricked my xt1562 while attempting to flash a rom. I wiped the phone using twrp and when it rebooted it was stuck on the 'WARNING BOOTLOADER UNLOCKED' screen.
I attempted to flash the stock rom using adb but it shows the following error.
C:\Users\devya\Desktop\Fastboot+ADB\Win32>fastboot flash partition gpt.bin
sending 'partition' (32 KB)...
OKAY [ 0.005s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.505s
PLEASE HELP!

can u paste the commands here to see them?

devyadav0399 said:
I accidentally bricked my xt1562 while attempting to flash a rom. I wiped the phone using twrp and when it rebooted it was stuck on the 'WARNING BOOTLOADER UNLOCKED' screen.
I attempted to flash the stock rom using adb but it shows the following error.
PLEASE HELP!
Click to expand...
Click to collapse
I'd advice you use the original image to flash for your country and device which was 5.1 via ADB following the steps described in the forum.
https://forum.xda-developers.com/mo...de-how-to-flash-factory-image-return-t3261486

Dio-Genes said:
I'd advice you use the original image to flash for your country and device which was 5.1 via ADB following the steps described in the forum.
https://forum.xda-developers.com/mo...de-how-to-flash-factory-image-return-t3261486
Click to expand...
Click to collapse
Thanks dude for the quick response. I'll get onto it.

if u flash the stock marshmallow firmware...u have to add sparsechunk 7,8 and 9 in the commands with the same way they appear...
bytheway...here is the latest with october patch yesterday new flashable rom zip...u only have to flash supersu after flashed rom.good luck.
https://forum.xda-developers.com/showthread.php?t=3533559

kos25k said:
if u flash the stock marshmallow firmware...u have to add sparsechunk 7,8 and 9 in the commands with the same way they appear...
bytheway...here is the latest with october patch yesterday new flashable rom zip...u only have to flash supersu after flashed rom.good luck.
https://forum.xda-developers.com/showthread.php?t=3533559
Click to expand...
Click to collapse
I tried that once before and got the same error message until I used the original firmware, 5.1 which was the one it was originally shipped with. That's why I gave that advice.

ok dude glad to hear.now from twrp i think u can flash latest MM flashable. (not sure through if u first have to flash 6.0 MM)

Downgrade from 7.0 ROM and return to stock, tried all possible things.

Ok hi guys, been lurking this forum for quite some time and i have had a couple of phones with zero problems really.
But now im at breaking point really.
Im using Ressurection remix 7.0 ROM and its just been kinda slow for me. So ive decided that i want to return to stock!
But motorolas website had no files for the xt1572, well thats no problem there is someone that has a guide on this on the forums, said and done i found this.
Problem is that the flashing fails for me.
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.098s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.808s
In bootloader it says xt1572 but when i connect USB and check in file manager (windows) it says 1575. Is this wierd?
anyway, is there anyone that is an android god that can get me through this. Im losing my mind, things were easier last time
Ask for anything, ill supply you as good as i can!

"Preflash Validation Error" means the ROM you are trying to flash, or that portion like the gpt.bin (partition table), is older than what is installed. This means the stock ROM you had before you flashed RR is newer than what you are flashing. I can tell you that the latest stock version is not available (yet) so you will be a version behind.
If you are sure you have the latest ROM you can get and it is specifically for your device, skip gpt.bin and flash the rest... If bootloader.img fails, skip that as well, but everything else should work. Sometimes the radio pieces need to be flashed more than once so that they take. Once you take your first OTA on stock, it should line everything back up and be "normal" again.
Of course, the best thing would be to restore your stock ROM backup you did in TWRP before you started...

[Q] How to find correct stock rom for my model?

I'm sorry of this is a noob question, but I found this: http: // www . filefactory . com/folder/c6cdedc45a775d27 <--- which contained a bunch of stock roms. (I'm a new user, so I can't post links; just remove the spaces)
I bricked my phone with an incompatible SuperSU (stuck on Moto boot screen), so I need to flash 6.0.1 for XT1644 (I think it's unlocked/USA variant but idk)
I tried one that I found called "XT1625-XT1644_ATHENE-RETUS_MPJ24.139-48_cid50_subsidy-DEFAULT_CFC.xml_2.zip" which said that it was 6.0.1, but when I tried to flash, it said:
Code:
C:\Users\Mateo\Downloads\Extracted ROM>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.005s]
writing 'partition'...
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.044s
Apparently, I'm flashing the wrong version of the firmware, but there's like 10 pages of downloads on the filefactory link, and it takes about an hour to download each... Can anyone help me out here?
Thanks!

That firmware should be okay, however that error is normal if you're attempting to flash a build older than the build you currently have/had. I'm guessing you had either MPJ24.139-64 or Nougat on your device before? Your updated bootloader and gpt blocks any downgrades (and thus reduces the chances of bricking your device).
You may be able to flash your older firmware (and downgrading in the process) if you do not flash gpt or bootloader, omit:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
The rest of your flashing commands should be the same. Of course, verify your bootloader is unlocked (which it should be if you were flashing SuperSU), else you won't be able to downgrade.

Thanks for your quick response!! I downgraded without problem! Also rooted with a compatible SuperSU this time... Then disabled the OTA daemon, so it wouldn't​ auto update, and brick myself, since I'm running an earlier version of the bootloader (correct me if I'm wrong...) Thanks again! :good:

matetoes said:
Thanks for your quick response!! I downgraded without problem! Also rooted with a compatible SuperSU this time... Then disabled the OTA daemon, so it wouldn't​ auto update, and brick myself, since I'm running an earlier version of the bootloader (correct me if I'm wrong...) Thanks again! :good:
Click to expand...
Click to collapse
Woo, good to hear you've got your device working I think with the OTA, you should be okay as the bootloader blocked earlier attempts to downgrade and your subsequent flashes won't have affected those partitions, so it's unlikely you'll brick your device!