Hello,
my tablet has a unlocked bootloader and was on 4.0.3 stock rooted when i did this and thought i would share how i did it, its really fast and easy.
Disclaimer: i am in no way responsible for a bricked or damaged devices, world endings, zombie attacks from using this guide. use at your own risk
Requirements: rooted with a custom recovery and unlocked bootloader. (i used CWM) a tf300t tablet
Recommended: doing the file transfers from pc to device as you go along
Step 1: get all the files you need download
****Version V9.4.3.30 make sure us download the file for US SKU
http://usa.asus.com/Tablet/Transformer_Pad/ASUS_Transformer_Pad_TF300T/#download
****Version V10.4.2.9 make sure to download the version for US SKU
http://usa.asus.com/Tablet/Transformer_Pad/ASUS_Transformer_Pad_TF300T/#download
Step 2: get the first file ready by unzipping (US_epaduser9_4_3_30UpdateLauncher) so it extracts a zip file called (US_epad-user-9.4.3.30)
-place (US_epad-user-9.4.3.30) on the internal storage of your device.
Step 3: boot into recovery and wipe data/factory reset, wipe dalvik cache
-then flash the file US_epad-user-9.4.3.30.zip in recovery
-reboot device
Step 4: one device is rebooted and past the set up screen delete US_epad-user-9.4.3.30.zip off your internal storage (DO NOT INSTALL A CUSTOM RECOVERY AT THIS POINT)
Step 5 getting jelly bean ready: unzip (US_epaduser_10_4_2_9_UpdateLauncher) so it extracts a file called (US_epad-user-10.4.2.9)
- at that point a triangle with a exclamation point in the middle should appear saying system update file detected
(that same icon and message might pop up while the (US_epad-user-9.4.3.30) is on the internal storage ignore it then, this is why we delete said file before we put the (US_epad-user-10.4.2.9) file on the device)
Step 6: click on the triangle icon on your device and accept the update, your device will reboot and install jelly bean (should take 10 to 15 minutes be patient)
---Once the device reboots it will upgrade and you will be on jelly bean yay
To obtain root follow part 3 of this thread ( http://forum.xda-developers.com/showthread.php?t=1845377) i will put the intructions here below for those to lazy to click the link
all thanks for rooting instructions go to krabappel2548 thanks man.
rooting and custom recovery
files needed for this process
fastboot and recovery http://www.mediafire.com/?1u44b0w3k1qoy4r
root files: http://www.mediafire.com/?cr209hb5e2fr910
== Part 3 - Install recovery and rooting ==
Let's start with installing the recovery
1) Download these 2 files:
- Jellybean recovery with fastboot files: Fastboot files + JB recovery
- Root files: Root Files
- You can also download the new CWM Touch recovery if you don't like TWRP: CWM Touch recovery thread
2) Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (Shift + Right mouse)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
- TWRP: fastboot -i 0x0b05 flash recovery tf300t-jb.blob
- CWM: fastboot -i 0x0b05 flash recovery CWM-Touch.blob
6) A blue bar will appear and the recovery will be installed, when the blue bar is filled press volume up + power button to reboot into the tablet.
Now we will root the tablet
7) Copy Superuser-3.2-RC3-arm-signed to the internal storage of your tablet. then reboot into the bootloader again.
8) This time you need to select the RCK icon with volume up to enter the recovery image.
9) In recovery flash Superuser-3.2-RC3-arm-signed and reboot into the system
10) Install Supersu from Google Play
11) Open up Supersu, it will ask you to update the binary, choose yes.
12) Now your tablet should be rooted
hope this helps everyone
I Just followed this method with WW-files, works like a charm
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Thanks a lot, so happy I could help someone
Sent from my Galaxy Nexus using xda app-developers app
Deleted
Before I go on with this I'm giving you this guide from Potent Technologies and all credit goes to him I just wanted to share it with the XDA world
I am a owner of the 816 under Virgin Mobile and I would like to see more roms being made for this device as it is a great phone.
---------> https://www.youtube.com/watch?v=1NYP7V2ltpI <-------- Link to video
Back up your device information before you begin to your PC, Google Drive, etc. so that you may continue without risk of losing it. This is necessary because some devices will factory reset when you select "Yes" to unlock the bootloader.
Step 1: HTC Sync Manager
http://www.htc.com/in/support/softwar...
Step 2: Install ADB Fastboot
https://www.dropbox.com/s/aa8ri8uxyhh...
Step 3: Unlock Bootloader
http://www.htcdev.com/bootloader
Step 4: CWM Auto-Install via ADB Fastboot / Bootloader
(VIEW [NEW UPDATE] AT BOTTOM OF DESCRIPTION AS WELL!)
http://forum.xda-developers.com/devdb...
Step 5: SuperSU .zip file for Internal Storage
http://download.chainfire.eu/452/Supe...
[NEW UPDATE]:
IF YOU RECEIVE AN EXCLAMATION MARK ON THE RECOVERY SCREEN AFTER RUNNING THE .EXE AT 18:24 IN THE VIDEO THEN IT IS BECAUSE YOU NEED TO FLASH AN OLDER CLOCKWORKMOD FIRST!
POWER OFF YOUR DEVICE BY HOLDING VOLUME UP + POWER BUTTON FOR 15 SECONDS IF YOUR STUCK AND THEN POWER ON BY HOLDING VOLUME DOWN+POWER BUTTON AND YOU'LL GO BACK INTO THE BOOTLOADER.
DO AS YOU SEE FROM 11:40-12:03.
ONCE YOUR DEVICE IS SET IN THAT MODE DOWNLOAD THIS FILE BELOW:
https://s.basketbuild.com/dl/devs?dl=...
NOW SAVE THAT FILE WHERE THE ADB FOLDER IS THAT YOU INSTALLED AT THE BEGINNING OF THE VIDEO IN (Local Disk C:/adb)
ONCE THAT'S COMPLETE GO INTO THAT FOLDER AND RIGHT-CLICK IN ANY WHITE AREA OF THE FOLDER AND PRESS "RUN COMMAND LINE HERE" & RUN THE FOLLOWING COMMAND:
fastboot flash recovery recovery.img
REBOOT TO RECOVERY NOW AND IT WILL WORK!
NOW YOU CAN RUN THE .EXE FROM STEP 4 IN FASTBOOT MODE FOR THE LATEST VERSION!
Done!
This is a guide on how to Root your HTC Desire 816 and during this process you will add a Custom Recovery and Unlock your Bootloader! (Sorry; no S-Off at this time).
This will also allow you to enable moving apps and such to your SD card if you add specific properties to the build.prop file or by flashing a Kernel that's write-enabled. I will make a separate video to cover this as well when I have an SD available.
Really nice of you to make this and all, but this already exists. In fact all you did was take a previous tutorial and make it carrier specific, even though THIS clearly states all of this, and works on the Virgin Mobile version. However the video was a great addition (assuming you made it).
And most of your links are broken.
Checked and all links in the video have been updated and so has the .exe for the recovery.
Sent from my 710C using XDA Free mobile app
First backup your all data ..
Note; first goto developer option /enable OEM unlock ,then continue below step..
Step 1:unlock your bootloader
Follow this totourial...this is the simple way..
https://youtu.be/SHIYKDfseaY
Step2: Root
Install this apk blow the link
Open and click Root
(Data or wifi connection compulsory)
https://drive.google.com/file/d/0B5QjTxPnbzHJUUx3WnFQMVJqWHc/view?usp=docslist_api
Now your device rooted
Step 3: flash twrp
Use flashify.apk available in playstore
Download twrp below the link
Twrp (recommended)
https://drive.google.com/file/d/0B5QjTxPnbzHJZ3AxLUZONU9OWm8/view?usp=docslist_api
Material twrp
https://drive.google.com/file/d/0B5QjTxPnbzHJelpxVkFnRXpvdkU/view?usp=docslist_api
Step 4: flash superSU
goto recovery (click volumeincrease+power button)
Then click recovery(volume down OK button)
Flash this zip download below the link
https://drive.google.com/file/d/0B5QjTxPnbzHJSk5odzlDUV9yTkk/view?usp=docslist_api
Finish your device get rooted and twrp ..
this method works after updating to marshmallow? also post some screenshots for verifying.
hmm..works
Try it ...but properly..follow the steps
Can anyone say?
The complete instruction for unlocking the bootlooder of pixel v1?on 6.0?
can't understand the video...
Plz help me i want to unlock the bootloder,flash twrp,and install xposed installer on my phne
Help me plz
On my Lava pixel v1 nothing happens when trying to flash it using sp flash tool or miracle. But it can go into fastboot mode. Tried using battery and without battery but nothing happens. Tried flashing in fastboot using commands but it says remote device is locked. How to flash it. Phone restarts after showing lava logo
How to install TWRP 3.0 and ROOT on HTC Desire 626 LTE.
The step by step guideline is like these :
1. Unlock bootloader of this instruction Link
2. Download TWRP and TWRP-Install.zip. TWRP - Link , TWRP-Install.zip - Link, Root archive - Link
3. Reboot phone in Fastboot Mode.
4. Copy twrp-fastboot-boot.img into fastboot folder, archive TWRP-Install.zip - in Internal Memory.
5. Open fastboot and enter this command
Code:
fastboot boot twrp-fastboot-boot.img
Your phone reboot in temporary TWRP.
6. Accept system modification alert by swipe.
7. Go to Install and choose TWRP-Install.zip, accept this by swipe.
8. Go to Reboot and reboot in recovery.
9. ??????????
10. PROFIT!
Bugs
Mount reserve partition(is not critical).
Contributors
Skyrimus
Original link - http://4pda.ru/forum/index.php?s=&showtopic=701301&view=findpost&p=54026939
Hi, my phone is stuck at the Fastboot page
I have tried flash in
1) your receovery linked above
2)customized recovery under this link https://twrp.me/devices/htcdesire626s.html
But none of them works.
Can you please help to give some advise?
Skyrimus said:
How to install TWRP 3.0 and ROOT on HTC Desire 626 LTE.
The step by step guideline is like these :
1. Unlock bootloader of this instruction Link
2. Download TWRP and TWRP-Install.zip. TWRP - Link , TWRP-Install.zip - Link, Root archive - Link
3. Reboot phone in Fastboot Mode.
4. Copy twrp-fastboot-boot.img into fastboot folder, archive TWRP-Install.zip - in Internal Memory.
5. Open fastboot and enter this command
Code:
fastboot boot twrp-fastboot-boot.img
Your phone reboot in temporary TWRP.
6. Accept system modification alert by swipe.
7. Go to Install and choose TWRP-Install.zip, accept this by swipe.
8. Go to Reboot and reboot in recovery.
9. ??????????
10. PROFIT!
Bugs
Mount reserve partition(is not critical).
Contributors
Skyrimus
Original link - http://4pda.ru/forum/index.php?s=&showtopic=701301&view=findpost&p=54026939
Click to expand...
Click to collapse
Finally! Thanks alot for your share Skyrimus.
I don't believe you can install TWRP via fastboot if your phone is in s-on state, correct me if I'm wrong, but what I did to install TWRP was I downloaded the official version for my phone (duh) and used the same fastboot commands while phone was in fastboot mode which resulted in a message "FAILED: <remote: cannot flash this partition in s-on state>"
I resolved this by rebooting to download mode instead and running the commands as normal and all went well, so if you don't have your phone in s-off and received the same error as me then download mode will do the trick
Skyrimus said:
How to install TWRP 3.0 and ROOT on HTC Desire 626 LTE.
The step by step guideline is like these :
1. Unlock bootloader of this instruction Link
2. Download TWRP and TWRP-Install.zip. TWRP - Link , TWRP-Install.zip - Link, Root archive - Link
3. Reboot phone in Fastboot Mode.
4. Copy twrp-fastboot-boot.img into fastboot folder, archive TWRP-Install.zip - in Internal Memory.
5. Open fastboot and enter this command
Code:
fastboot boot twrp-fastboot-boot.img
Your phone reboot in temporary TWRP.
6. Accept system modification alert by swipe.
7. Go to Install and choose TWRP-Install.zip, accept this by swipe.
8. Go to Reboot and reboot in recovery.
9. ??????????
10. PROFIT!
Bugs
Mount reserve partition(is not critical).
Contributors
Skyrimus
Original link - http://4pda.ru/forum/index.php?s=&showtopic=701301&view=findpost&p=54026939
Click to expand...
Click to collapse
Hi Skyrimus !
Can you give me a more details about "reserve partition" ? A trayed your metod- that partialy working, but to the moment TWRP menu with prompt swap to allow write. Than frozen screan, i can do nothig, and starting system android phone under this screan.. My model: HTC Desire 626. (LTE internet) Android 5.1 loolipop. not 6 Can you help me to get apropriate TWRP, or any thinks ? My knowlege is not to good..
Hey, is someone able to extract the RUU from this htc desire 626 lte? i softbricked it and cannot find anything working. Thats the version with snapdragon 410, isn't it?
Zwolin said:
Hey, is someone able to extract the RUU from this htc desire 626 lte? i softbricked it and cannot find anything working. Thats the version with snapdragon 410, isn't it?
Click to expand...
Click to collapse
did uou pres power button, simultanously volume + up to 10 seconds ?
---------- Post added at 09:56 PM ---------- Previous post was at 09:00 PM ----------
janalaa said:
Hi Skyrimus !
Can you give me a more details about "reserve partition" ? A trayed your metod- that partialy working, but to the moment TWRP menu with prompt swap to allow write. Than frozen screan, i can do nothig, and starting system android phone under this screan.. My model: HTC Desire 626. (LTE internet) Android 5.1 loolipop. not 6 Can you help me to get apropriate TWRP, or any thinks ? My knowlege is not to good..
Click to expand...
Click to collapse
Skyrimus said:
How to install TWRP 3.0 and ROOT on HTC Desire 626 LTE.
The step by step guideline is like these :
1. Unlock bootloader of this instruction Link
2. Download TWRP and TWRP-Install.zip. TWRP - Link , TWRP-Install.zip - Link, Root archive - Link
3. Reboot phone in Fastboot Mode.
4. Copy twrp-fastboot-boot.img into fastboot folder, archive TWRP-Install.zip - in Internal Memory.
5. Open fastboot and enter this command
Code:
fastboot boot twrp-fastboot-boot.img
Your phone reboot in temporary TWRP.
6. Accept system modification alert by swipe.
7. Go to Install and choose TWRP-Install.zip, accept this by swipe.
8. Go to Reboot and reboot in recovery.
9. ??????????
10. PROFIT!
Bugs
Mount reserve partition(is not critical).
Contributors
Skyrimus
Original link - http://4pda.ru/forum/index.php?s=&showtopic=701301&view=findpost&p=54026939
Click to expand...
Click to collapse
Resolved for android 5.1 loolipop :
after unlock bootloader-
1. in the mobile system android, use Kingo Root.apk -one toutch ROOT (temporary)
2. flash custom "recovery. img" downloaded to SDcard , by use RASHR. apk (ply store)
3. reboot to fastboot mode, move highlite menu- to recovery mode- push pwr button - wait, wil Starts TWRP 3.0.0 Skyrimus
Profit! It was very simple
Bugs : mount reserve partition error (stil.)
Linkes for download files 1 topic (Skyrymus)
Thank you Skyrimus, greate job!
Compilation
Hi Skyrimus,
I want to compile a LineageOS rom for the HTC desire 626.
Have you still got configurations files ?
hello sir
Skyrimus said:
How to install TWRP 3.0 and ROOT on HTC Desire 626 LTE.
The step by step guideline is like these :
1. Unlock bootloader of this instruction Link
2. Download TWRP and TWRP-Install.zip. TWRP - Link , TWRP-Install.zip - Link, Root archive - Link
3. Reboot phone in Fastboot Mode.
4. Copy twrp-fastboot-boot.img into fastboot folder, archive TWRP-Install.zip - in Internal Memory.
5. Open fastboot and enter this command
Code:
fastboot boot twrp-fastboot-boot.img
Your phone reboot in temporary TWRP.
6. Accept system modification alert by swipe.
7. Go to Install and choose TWRP-Install.zip, accept this by swipe.
8. Go to Reboot and reboot in recovery.
9. ??????????
10. PROFIT!
Bugs
Mount reserve partition(is not critical).
Contributors
Skyrimus
Original link - http://4pda.ru/forum/index.php?s=&showtopic=701301&view=findpost&p=54026939
Click to expand...
Click to collapse
sir am using htc desire 626q veriant i cant upgrade to lolipop or other plzz help me with full toturial video link
[TWRP][HUAWEI Y7-Y7 PRIME] recovery and root
Follow at your own risk, i don’t take any responsibility if anything goes wrong
Files are developed by chinese developers, so there’s limited support for this device so far.
Your warranty will be void after root
Supported Devices:
tested devices: TRT-AL00, TRT-AL00A, TRT-TL10, TRT-TL10A, TRT-L21A, TRT-LX1, TRT-LX3
no tested devices: TRT-LX2, TRT-L03, TRT-L53
Note: on some devices touch screen does not work in TWRP mode, you are advised to use mouse with OTG connector to work in TWRP
Tutorial:
RECOVERY
1. Backup all important data
2. Unlock bootloader of your phone
3. Download FILES
4. Extract downloaded file on your computer
5. Power off phone, Hold volume down and insert cable. phone should enter fastboot mode.
6. Open MAF32 and type ” fastboot flash recovery TRT-TWRP-3.1.1-0818.img ” and press enter
7. Once installation completed. Disconnect from pc. and hold volume up and power, keep holding until you see TWRP screen.
8. Recovery will be in chinese, Tap on right side button, and choose 2nd option, recovery will be changed to English.
ROOT
9. Now swipe to allow modifications. (Advised to make backup in TWRP for safe side)
10. Then tap on advanced. and tap root button.
11. Swipe to install root.
12. Reboot phone to normal mode.
13. After several boots , your phone should be up and running.
14. Now go in settings > Application manager > super su > permissions and allow all permissions.
15. Done, now install any root checker to verify root access.
thanks so much bro it works
add trt-l53 ... + i bricked my trt-l53 does anybody have a backup on mega or gdrive i need the firmware please
astusal said:
[TWRP][HUAWEI Y7-Y7 PRIME] recovery and root
Follow at your own risk, i don’t take any responsibility if anything goes wrong
Files are developed by chinese developers, so there’s limited support for this device so far.
Your warranty will be void after root
Supported Devices:
tested devices: TRT-AL00, TRT-AL00A, TRT-TL10, TRT-TL10A, TRT-L21A
no tested devices: TRT-LX1, TRT-LX2 TRT-LX3, TRT-L03
Note: on some devices touch screen does not work in TWRP mode, you are advised to use mouse with OTG connector to work in TWRP
Tutorial:
RECOVERY
1. Backup all important data
2. Unlock bootloader of your phone
3. Download FILES
4. Extract downloaded file on your computer
5. Power off phone, Hold volume down and insert cable. phone should enter fastboot mode.
6. Open MAF32 and type ” fastboot flash recovery TRT-TWRP-3.1.1-0818.img ” and press enter
7. Once installation completed. Disconnect from pc. and hold volume up and power, keep holding until you see TWRP screen.
8. Recovery will be in chinese, Tap on right side button, and choose 2nd option, recovery will be changed to English.
ROOT
9. Now swipe to allow modifications. (Advised to make backup in TWRP for safe side)
10. Then tap on advanced. and tap root button.
11. Swipe to install root.
12. Reboot phone to normal mode.
13. After several boots , your phone should be up and running.
14. Now go in settings > Application manager > super su > permissions and allow all permissions.
15. Done, now install any root checker to verify root access.
Click to expand...
Click to collapse
Hi Guys!!! I just root my device but it´s a little diferent the method, once you enter on advance, you have to tap install SU, it's take 3 tries to sucessfully instal Super SU, once Super SU installed the phone automatically reboot.
It's reboot a couple of time, and to check I install root checker and IT'S WORK!!!!!!!!
Thanks a lot for the help!!!!!TRT-LX3 check!!!!!! :laugh::laugh::laugh::laugh::laugh::laugh::laugh:
ADB-1 said:
add trt-l53 ... + i bricked my trt-l53 does anybody have a backup on mega or gdrive i need the firmware please
Click to expand...
Click to collapse
How to bricked your device?
Andrea_santiba said:
Hi Guys!!! I just root my device but it´s a little diferent the method, once you enter on advance, you have to tap install SU, it's take 3 tries to sucessfully instal Super SU, once Super SU installed the phone automatically reboot.
It's reboot a couple of time, and to check I install root checker and IT'S WORK!!!!!!!!
Thanks a lot for the help!!!!!TRT-LX3 check!!!!!! :laugh::laugh::laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
It's Great! ?
cryotick said:
thanks so much bro it works
Click to expand...
Click to collapse
What is your device?
ADB-1 said:
add trt-l53 ... + i bricked my trt-l53 does anybody have a backup on mega or gdrive i need the firmware please
Click to expand...
Click to collapse
+1 I also bricked mine (TRT-LX2) I need a backup or the hicloud download to stock rom
@astusal
Can you provide us the source of all of this ?
Is there a seperate SuperSU zip available ?
Thnx !
raystef66 said:
@astusal
Can you provide us the source of all of this ?
Is there a seperate SuperSU zip available ?
Thnx !
Click to expand...
Click to collapse
Check your inbox
ashd999 said:
+1 I also bricked mine (TRT-LX2) I need a backup or the hicloud download to stock rom
Click to expand...
Click to collapse
not have any backup but i searching for...
Look here for TWRP on TRT-LX3 with Magisk 15.3
https://www.youtube.com/watch?v=bnEA__fbZ6U
So basicly they use the twrp out of OP
So flash recovery in fastboot
Reboot into recovery (vol++power)
Backup !
Format data
Flash magisk
reboot
Run Magisk Manager
done !
METHOD FOR TRT-LX1
Thnx for the above files !
I just did following steps : (almost like OP but slightly different)
0. follow here
1. Download above package from OP, be sure to be bl unlocked and frp unlocked
1a. Put latest Magisk 15.3 and manager on your extSD or flash supersu from within twrp package. It will be your choice how to root (btw, supersu in this package has chinese characters above)
1b. enable usb debugging, connect phone...
2. Run adb (devices)...you know by now, right
3. run following commands :
a. adb reboot bootloader
b. fastboot flash recovery TRT-TWRP-3.1.1-0818.img
4. when flashed, disconnect phone, and hold vol+ + power to boot into twrp recovery, select english
5. back up all !
6. format data
7. install Magisk or SuperSU at choice from your extSD. NOTE : when flashed and you want to reboot, select : not install supersu
8. reboot. It will take some reboots but all ok :good:
Can anyone in this thread post their build number? I'm trying to use firmware finder to get the stock rom
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Thanks.
astusal said:
What is your device?
Click to expand...
Click to collapse
I have a huawei y7 prime
Xposed Framework?
astusal said:
[TWRP][HUAWEI Y7-Y7 PRIME] recovery and root
Follow at your own risk, i don’t take any responsibility if anything goes wrong
Files are developed by chinese developers, so there’s limited support for this device so far.
Your warranty will be void after root
Supported Devices:
tested devices: TRT-AL00, TRT-AL00A, TRT-TL10, TRT-TL10A, TRT-L21A, TRT-LX1, TRT-LX3
no tested devices: TRT-LX2, TRT-L03, TRT-L53
Note: on some devices touch screen does not work in TWRP mode, you are advised to use mouse with OTG connector to work in TWRP
Tutorial:
RECOVERY
1. Backup all important data
2. Unlock bootloader of your phone
3. Download FILES
4. Extract downloaded file on your computer
5. Power off phone, Hold volume down and insert cable. phone should enter fastboot mode.
6. Open MAF32 and type ” fastboot flash recovery TRT-TWRP-3.1.1-0818.img ” and press enter
7. Once installation completed. Disconnect from pc. and hold volume up and power, keep holding until you see TWRP screen.
8. Recovery will be in chinese, Tap on right side button, and choose 2nd option, recovery will be changed to English.
ROOT
9. Now swipe to allow modifications. (Advised to make backup in TWRP for safe side)
10. Then tap on advanced. and tap root button.
11. Swipe to install root.
12. Reboot phone to normal mode.
13. After several boots , your phone should be up and running.
14. Now go in settings > Application manager > super su > permissions and allow all permissions.
15. Done, now install any root checker to verify root access.
Click to expand...
Click to collapse
Have you been able to install xposed framework? Or still can not flash zips in these recoverys?
KevinFer said:
Have you been able to install xposed framework? Or still can not flash zips in these recoverys?
Click to expand...
Click to collapse
I installed xposed without problems. Running f.e. gravitybox without problem.
So flashing with this twrp is no problem.
Perhaps follow my post here.
Btw, for this device flash xposed sdk24
raystef66 said:
I installed xposed without problems. Running f.e. gravitybox without problem.
So flashing with this twrp is no problem.
Perhaps follow my post here.
Btw, for this device flash xposed sdk24
Click to expand...
Click to collapse
could you pass me the files that I have to flash to install the xposed in the huawei y7 trt-lx3 pleasee!
KevinFer said:
could you pass me the files that I have to flash to install the xposed in the huawei y7 trt-lx3 pleasee!
Click to expand...
Click to collapse
See here : https://forum.xda-developers.com/showthread.php?t=3034811
So flash : http://dl-xda.xposed.info/framework/sdk24/arm/ take the v89 http://dl-xda.xposed.info/framework/sdk24/arm/xposed-v89-sdk24-arm.zip
And flash the installer from the thread.
That's all !
I see strange folders when looking for zip files
https://ibb.co/gVOOUG
---------- Post added at 03:39 PM ---------- Previous post was at 03:31 PM ----------
can I put the files in the root and flash from there?
https://ibb.co/jjvTUG