Help csc changer on stock rom n910c - Galaxy Note 4 Q&A, Help & Troubleshooting

Hi all how to change csc on n910c? Just now i test with *#272*imei# its not working..tried on n3 it will popup special menu to change n will be factory reset after that...can someone explain is this cause od android 4.4.4?

same issue for me on SM N910U, according to this thread it works on a Canadian Note 4. Not sure why not the international models. (link: http://forum.xda-developers.com/note-4/general/ref-stock-firmware-kernel-modem-recovery-t2920452)

mm_scammer said:
Hi all how to change csc on n910c? Just now i test with *#272*imei# its not working..tried on n3 it will popup special menu to change n will be factory reset after that...can someone explain is this cause od android 4.4.4?
Click to expand...
Click to collapse
zhable said:
same issue for me on SM N910U, according to this thread it works on a Canadian Note 4. Not sure why not the international models. (link: http://forum.xda-developers.com/note-4/general/ref-stock-firmware-kernel-modem-recovery-t2920452)
Click to expand...
Click to collapse
Try this tool: Phone INFO ★Samsung★ > Menu > 'Other Tools' > 'CSC Changer'.
(may requires root to work)

vndnguyen said:
Try this tool: Phone INFO ★Samsung★ > Menu > 'Other Tools' > 'CSC Changer'.
(may requires root to work)
Click to expand...
Click to collapse
would love to give a try, but sadly root will require knox being void currently. Can you explain to me what the CSC does to a phone? I have been trying to get LTE to work on my phone.

zhable said:
would love to give a try, but sadly root will require knox being void currently. Can you explain to me what the CSC does to a phone? I have been trying to get LTE to work on my phone.
Click to expand...
Click to collapse
Sorry I have no idea on LTE.
CSC (Consumer Software Customization, aka Sales Code, or Region Code) is just a customization for different region/country/territory.
Regarding the code *#272*imei# to change the CSC, AFAIK that code does not exist anymore on new Samsung models.
You can check to make sure if it exists or not, by using Phone INFO ★Samsung★ app > Menu > 'Secret Codes', scroll down and check if the code "272*..." does exist?

yes im not sure if you can help, but according to everywhere i look i have all the LTE bands for AT&T, but i never get anything but HSPA +. IS it possible the CSC controls which LTE bands to use based off of country?

Related

GT-I9505 4g LTE option missing

My Samsung galaxy s4 GT-I9505 has no 4g LTE option running on stock Android 4.4.2. Please help me!
khsh97 said:
My Samsung galaxy s4 GT-I9505 has no 4g LTE option running on stock Android 4.4.2. Please help me!
Click to expand...
Click to collapse
If you dial *#*#4636#*#* do you get the testing menu? If so, go into Phone Information and check you are set to LTE/GSM auto or similar.
Edgio60 said:
If you dial *#*#4636#*#* do you get the testing menu? If so, go into Phone Information and check you are set to LTE/GSM auto or similar.
Click to expand...
Click to collapse
Sorry to bump old thread but I do not get any testing by dialing *#*#4636#*#*. I am on official stock kitkat.
khsh97 said:
Sorry to bump old thread but I do not get any testing by dialing *#*#4636#*#*. I am on official stock kitkat.
Click to expand...
Click to collapse
If you input that code in the dialer (correctly) it should take you to a screen called "Testing". If it doesn't then there is something wrong with your phone. This works on pretty much all phones.
@GDReaper: The Galaxy S4 does not recognize that particular version of the USSD code. It can be run however through the Phone Info app.
@khsh97: Please post the following information:
1. Model Number
2. Android Version, found by going to Settings > More > About device.
3. Firmware Version (AP, CP, CSC), found by dialing *#1234# in the dialer or by installing Phone Info from the Play Store and running it.
4. Service Provider
5. Country
6. Is the phone rooted? (Yes/No)
7. Is a custom ROM installed? (Yes/No, and the name of the ROM)
Before using GDReaper's suggested method, post the information requested, so that we can eliminate other possibilities for why you don't have a LTE option.
Strephon Alkhalikoi said:
@GDReaper: The Galaxy S4 does not recognize that particular version of the USSD code. It can be run however through the Phone Info app.
.
Click to expand...
Click to collapse
I ran the code before posting and it worked on my S4. However, am running the gpe rom. Maybe that's why it actually worked
That is probable, as I'm running a rooted and debloated Touchwiz and it didn't work. But as mentioned, the Phone Info app is another way to get there.
Sorry for late reply!
Model No: GT-I9505
Android version: 4.4.2
Firmware: I9505XXUGNE8(official stock)
AP: I9505XXUGNE8
CP: I9505VFGGNE8
CSC: I9505VFGGNE2
My phone is rooted with towelroot however the option was missing before root as well.
BTW, I don't have LTE sim, does that matter?
If that matter then how can I check without LTE sim?
And yeah, the code *#*#4636#*#* is not working in my galaxy s4.
I am going to check out phone info app.
If you don't have a LTE SIM, you won't have LTE as an option. Upgrade your SIM to a LTE version and you should then be able to select LTE.
Strephon Alkhalikoi said:
If you don't have a LTE SIM, you won't have LTE as an option. Upgrade your SIM to a LTE version and you should then be able to select LTE.
Click to expand...
Click to collapse
Ok, thank you...!!!
By the way, why the code is not working on official touchwiz roms?
Ask Samsung that question, but don't expect an answer. There could be a multitude of reasons why Samsung disabled it, but unless they pony up a response we'll never know.
Lol, Nice answer!!! Anyway phone info app can do it so why we should argue with samsung for disabling that code.
I think you must have firmware based on your country to have LTE. Now I'm downloading 4.4.2 for my country and I'll keep you posted
@velizarcho123: And you'd be wrong. LTE depends on two things: having a LTE-compatible SIM and having the proper frequencies in the radio chip to pick up LTE service. Assuming the device is neither region nor SIM locked, the moment you put in a LTE SIM Android will load the APN for the carrier into Settings. LTE should then work immediately. If it doesn't, the APN can be modified in most devices so it does work.
That said, if possible, using the firmware from your home region is the smartest idea, as Samsung does modify the firmware a bit, usually by removing languages other than those spoken in the region.
Strephon Alkhalikoi said:
@velizarcho123: And you'd be wrong. LTE depends on two things: having a LTE-compatible SIM and having the proper frequencies in the radio chip to pick up LTE service. Assuming the device is neither region nor SIM locked, the moment you put in a LTE SIM Android will load the APN for the carrier into Settings. LTE should then work immediately. If it doesn't, the APN can be modified in most devices so it does work.
That said, if possible, using the firmware from your home region is the smartest idea, as Samsung does modify the firmware a bit, usually by removing languages other than those spoken in the region.
Click to expand...
Click to collapse
All firmwares have LTE, I does a trick - rooted my phone and modified a system file that enables LTE in the network menu. This is stupid Samsung restriction.
velizarcho123 said:
All firmwares have LTE, I does a trick - rooted my phone and modified a system file that enables LTE in the network menu. This is stupid Samsung restriction.
Click to expand...
Click to collapse
Reread my post. You were able to modify the firmware, but that modification would not have worked if the SIM wasn't capable of LTE and the radio chip didn't support the frequencies used.
EDIT: Just to clarify, Samsung modifying firmware to remove the option to use LTE does not mean the firmware doesn't support LTE. Clearly it has to support LTE if your modification worked. This means that firmware is eliminated as a variable, leaving the two remaining variables as the SIM and the radio chip.

[Q] which rom for N900DDUENG1

Hi
I'm having N900DDUENG1.
I don't know which rom to select as there are different models.
plz. tell me what is XXUDNE3 and likes? Do I need to install only DDUENG rom or others too?
Why this DDUENG is for and whats the difference with others.
Thanks in advance
legalmantra said:
Hi
I'm having N900DDUENG1.
I don't know which rom to select as there are different models.
plz. tell me what is XXUDNE3 and likes? Do I need to install only DDUENG rom or others too?
Why this DDUENG is for and whats the difference with others.
Thanks in advance
Click to expand...
Click to collapse
N900 is your model, DDU is region code and ENG1 is version.
However DDU is not a CSC code, it is just a region code for a baseband, if I'm correct.
I guess your CSC should be INS or INU.
To obtain the correct firmware for your device, use Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'.
Wiht that app you can also know your CSC code.
vndnguyen said:
N900 is your model, DDU is region code and ENG1 is version.
However DDU is not a CSC code, it is just a region code for a baseband, if I'm correct.
I guess your CSC should be INS or INU.
To obtain the correct firmware for your device, use Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'.
Wiht that app you can also know your CSC code.
Click to expand...
Click to collapse
my CSC is INU.
Ok that means my guess was correct
Just go ahead.

LTE/WCDMA/GSM option not visible

Hello guys !
I am new to this forum and iam not sure if i am posting in the right category ... I have a Samsung Galaxy S4 gt-i9515 VE (Black Edition) and i am on a LTE network and have a LTE enabled sim ... but i can't seem to find LTE/WCDMA/GSM option in the settings .. i can see WCDMA/GSM and GSM only option in the Mobile Networks area ... i know that gt-i9515 supports lte and i have talked to my network's support and they confirmed that gt-i9515 is supported on their network ... can anyone help please ?? Any help will be appreciated. .. thanks in advance
Faisal
1. Install Kies 3 and conect your phone to the pc.
2. Take a look your CSC (pic attached)
3. Go to Sammobile.com and download the correct firmware (with correct CSC) for your device.
4. Flash this firmware through ODIN.
5. Enjoy :highfive:
Joku1981 said:
1. Install Kies 3 and conect your phone to the pc.
2. Take a look your CSC (pic attached)
3. Go to Sammobile.com and download the correct firmware (with correct CSC) for your device.
4. Flash this firmware through ODIN.
5. Enjoy :highfive:
Click to expand...
Click to collapse
Hello Joku1981 !!
Thanks for the reply ... My device belongs to the UAE region and I am in a different one and the device don't have a firmware for the region i am in ... but I got it working through "Service Mode" *#0011# ... I changed the preferred network mode to GWL ... Though doing this doesn't make the option to be visible in More Networks --> Network Mode .. but I am getting the 4G/LTE reception on my device ...
Hey you or anyone else have any idea on how to make the LTE/WCDMA/GSM option visible in the Network Mode ... That will be awesome ... Thanks.
You guys rock ..
Faisal
faisalblink said:
Hello Joku1981 !!
Thanks for the reply ... My device belongs to the UAE region and I am in a different one and the device don't have a firmware for the region i am in ... but I got it working through "Service Mode" *#0011# ... I changed the preferred network mode to GWL ... Though doing this doesn't make the option to be visible in More Networks --> Network Mode .. but I am getting the 4G/LTE reception on my device ...
Hey you or anyone else have any idea on how to make the LTE/WCDMA/GSM option visible in the Network Mode ... That will be awesome ... Thanks.
You guys rock ..
Faisal
Click to expand...
Click to collapse
The final and correct firmware for you is this: ONE. This will give u LTE/WCDMA/GSM option visible in the Network Mode. Flash this firmware 2 times if you have problems with wifi or sound. Tell me how it works. Good luck
Joku1981 said:
The final and correct firmware for you is this: ONE. This will give u LTE/WCDMA/GSM option visible in the Network Mode. Flash this firmware 2 times if you have problems with wifi or sound. Tell me how it works. Good luck
Click to expand...
Click to collapse
This is probably going to fix it, but just to mention that I was on the correct CSC and I still had to do a factory reset for LTE to become available (go figure).
Breach1337 said:
This is probably going to fix it, but just to mention that I was on the correct CSC and I still had to do a factory reset for LTE to become available (go figure).
Click to expand...
Click to collapse
My device already has the firmware you mentioned ... but no LTE/WCDMA/GSM option visible ... So I had to use *#0011# to select the preferred network mode to GWL through the service menu ..
Faisal
Joku1981 said:
The final and correct firmware for you is this: ONE. This will give u LTE/WCDMA/GSM option visible in the Network Mode. Flash this firmware 2 times if you have problems with wifi or sound. Tell me how it works. Good luck
Click to expand...
Click to collapse
My device came pre-installed with this firmware ..
Faisal
faisalblink said:
My device came pre-installed with this firmware ..
Faisal
Click to expand...
Click to collapse
Can you attach me one screenshot when Kies 3 show u that ur CSC: UAE pls?
Joku1981 said:
Can you attach me one screenshot when Kies 3 show u that ur CSC: UAE pls?
Click to expand...
Click to collapse
Sure ... see the attached screenshot
Faisal
faisalblink said:
Sure ... see the attached screenshot
Faisal
Click to expand...
Click to collapse
Don't tell never again that your CSC is UAE.... your CSC is XSG.
Joku1981 said:
Don't tell never again that your CSC is UAE.... your CSC is XSG.
Click to expand...
Click to collapse
Can you tell to which region XSG points too ?? I checked the baseband version on my device and it is of UAE ...
Faisal
Have a look at the screenshot
Sent from my GT-I9515 using XDA Free mobile app
Always EDGE IN MOBILE SERVICE TYPE
sir i have a problem about my samsung s4 i9515 from UAE..my location supports 4gLTE but when i open the data Connection it always appears E..even i change the sim..i tried also to insert that sim into another devices and open the data connection it shows H+ ..any solution to this case sir?

USSD Codes not Working Anymore

I have my S7 Edge for a month now , everything used to work fine (located in Pakistan)
Two days back I flashed a new Stock Rom from UK to check country restricted apps (there were not much though) and I noticed on that ROM USSD codes were not working and neither do my sensors.
Now I reverted back to stock rom of my region, now the sensors are fine, but USSD codes are still not working. I tried the 2 ROM available for my region thrice, but still the same issue.
Please suggest what should I do?
Note: I didn't root my phone (because don't want to void my warranty since I paid extra $150 for that) nor do there's any network restriction on USSD.
re: USSD codes
Shsabi said:
I have my S7 Edge for a month now , everything used to work fine (located in Pakistan)
Two days back I flashed a new Stock Rom from UK to check country restricted apps (there were not much though) and I noticed on that ROM USSD codes were not working and neither do my sensors.
Now I reverted back to stock rom of my region, now the sensors are fine, but USSD codes are still not working. I tried the 2 ROM available for my region thrice, but still the same issue.
Please suggest what should I do?
Note: I didn't root my phone (because don't want to void my warranty since I paid extra $150 for that) nor do there's any network restriction on USSD. Normally I use the codes to check balance and remaining data, it's so irritating to call the help center to know all the details without USSD.
Click to expand...
Click to collapse
You need to change your CSC to any other region or country.
The UK CSC no longer allows using the USSD codes.
I had the same problem using USSD so I just changed to a different CSC.
Once I changed to a different CSC the USSD codes worked perfectly.
Go to this link to download twrp flashable CSC's for your phone.
You will see a large selection to choose from:
http://forum.xda-developers.com/s7-edge/development/utility-flashable-csc-selection-30-t3392957
Good luck,
Have a great day!
Misterjunky said:
You need to change your CSC to any other region or country.
The UK CSC no longer allows using the USSD codes.
I had the same problem using USSD so I just changed to a different CSC.
Once I changed to a different CSC the USSD codes worked perfectly.
Go to this link to download twrp flashable CSC's for your phone.
You will see a large selection to choose from:
http://forum.xda-developers.com/s7-edge/development/utility-flashable-csc-selection-30-t3392957
Good luck,
Have a great day!
Click to expand...
Click to collapse
just one question, it won't trigger warranty void knox.. right?
Plus, I have my own region's CSC, but when I try to flash it via odin it gets stuck at NAND Write Start!!.. Anyway to fix it?
Misterjunky said:
You need to change your CSC to any other region or country.
The UK CSC no longer allows using the USSD codes.
I had the same problem using USSD so I just changed to a different CSC.
Once I changed to a different CSC the USSD codes worked perfectly.
Go to this link to download twrp flashable CSC's for your phone.
You will see a large selection to choose from:
http://forum.xda-developers.com/s7-edge/development/utility-flashable-csc-selection-30-t3392957
Good luck,
Have a great day!
Click to expand...
Click to collapse
When don't you stop thinking that all people ROOT their phones?
"TWRP flashable CSC's": so you phone has to be rooted! Not everyone wants their phones to root, and there are people who won't want the KNOX-flag triggered!
re: you're right!
henklbr said:
When don't you stop thinking that all people ROOT their phones?
"TWRP flashable CSC's": so you phone has to be rooted! Not everyone wants their phones to root, and there are people who won't want the KNOX-flag triggered!
Click to expand...
Click to collapse
After giving it a lot of thought you're right, perhaps that's the first thing I should ask,
maybe the reason I did not think of asking is because I come from a rooted family...
But sooner or later doesn't everyone root their phones? LOL
Have a great day!
Misterjunky said:
The UK CSC no longer allows using the USSD codes.
Click to expand...
Click to collapse
Not quite true, I do have a UK version, and USSD codes work fine on mine.
Sent from my SM-G930F using XDA-Developers mobile app
henklbr said:
When don't you stop thinking that all people ROOT their phones?
"TWRP flashable CSC's": so you phone has to be rooted! Not everyone wants their phones to root, and there are people who won't want the KNOX-flag triggered!
Click to expand...
Click to collapse
The root method does NOT trip knox! Stop spreading your nonsense lol! It is done with the Samsung official engineering bootloader. Again, WARRANTY VOID: 0x0 :good::good:
I have been flashing/testing different carrier's firmware and have rooted the phone pictured below 3 or 4 times now and, as you can see, it's golden. Currently it is G935U but originally it was from Sprint.
hi,
i have the same problem on my galaxy s7 SM-G930 F
NONE of the ussd/mmi codes work!
when i type the code nothing happens
i instaled the PhoneINFO app and in the CSC Code card the Original CSC Code field is empty
but all other fields are filled:
Product code:
sm2g930fzsadhr
original csc code:
firmwares csc code:
DHR
Active csc code:
DHR
Availabile csc codes:
CRO, DHR
CSC Country:
Croatia / HR
Mobile Operator:
HT HR / 21901
how can i fix my s7 so CSC Codes can work again!
How to fix invalid MMI code on samsung galaxy s7
I have the same problem on my galaxy s7 SM-G930F.
When I check Divert if Unavailable (62) using *#62# I get the error
"Connection problem or invalid MMI code."...
It turns out that the G930F (BNIB sealed) I bought was a grey import and even though the hardware G930F is international, the firmware loaded is for the UK and the Phone INFO app shows the CSC to be "BTU" (see CSC codes) . And so even though the phone is unlocked, it does not function 100% in the Australian mobile network.
To fix this I had to flash the AU firmware for the CSC code XSA found at
SM-G930F — Galaxy S7 firmware
using ODIN.
After this the CSC is updated to XSA and all USSD codes work perfectly!
No rooting required!
A bonus for having the correct CSC/firmware for my S7 is that VoLTE now works with the carrier!

VOLTE support in S8 - SM-G950w

Hi,
I have SM-950W (Canada - Telus) bought from canada. After unlocking I tried to use it in india with Reliance JIO (VOLTE). But only LTE working. Can any one help me to get the VOLTE working. I have read many forum related to CSC.
Can I flash my phone with other phone CSC. As Indian CSC available for 950FD only.
Current CSC : TLS
available CSC : BMC,BMA, CH, ESK, FMC, GLW, KDO,MTB,RWC,TLS,VMC,VTR,XAC
Anyother method to get VOLTE.
dhavalele04 said:
Hi,
I have SM-950W (Canada - Telus) bought from canada. After unlocking I tried to use it in india with Reliance JIO (VOLTE). But only LTE working. Can any one help me to get the VOLTE working. I have read many forum related to CSC.
Can I flash my phone with other phone CSC. As Indian CSC available for 950FD only.
Current CSC : TLS
available CSC : BMC,BMA, CH, ESK, FMC, GLW, KDO,MTB,RWC,TLS,VMC,VTR,XAC
Anyother method to get VOLTE.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8+/how-to/how-to-volte-jio-india-carrier-usa-t3659238
This should work on canadian variants too
nimms said:
https://forum.xda-developers.com/galaxy-s8+/how-to/how-to-volte-jio-india-carrier-usa-t3659238
This should work on canadian variants too
Click to expand...
Click to collapse
Which firmware is installed?
@iamnoum said:
Which firmware is installed?
Click to expand...
Click to collapse
You may use USA unlocked version on canadian variants too.
dhavalele04 said:
Hi,
I have SM-950W (Canada - Telus) bought from canada. After unlocking I tried to use it in india with Reliance JIO (VOLTE). But only LTE working. Can any one help me to get the VOLTE working. I have read many forum related to CSC.
Can I flash my phone with other phone CSC. As Indian CSC available for 950FD only.
Current CSC : TLS
available CSC : BMC,BMA, CH, ESK, FMC, GLW, KDO,MTB,RWC,TLS,VMC,VTR,XAC
Anyother method to get VOLTE.
Click to expand...
Click to collapse
Hiii... How did u unlock the Canadian carrier lock
praysonbabu said:
Hiii... How did u unlock the Canadian carrier lock
Click to expand...
Click to collapse
Buy a code and unlock it
thatsupnow said:
Buy a code and unlock it
Click to expand...
Click to collapse
How can i buy a code.... How much it cost
Just Google SIM unlock galaxy s8 there's tons of sites out there. Prices vary from one site to the next. Once you've got your code enter this in dialer app #7465625*638*# you'll get this screen. Doing it this way you won't need another SIM card to unlock your phone just input your code and hit okay
nimms said:
https://forum.xda-developers.com/galaxy-s8+/how-to/how-to-volte-jio-india-carrier-usa-t3659238
This should work on canadian variants too
Click to expand...
Click to collapse
Hiya did this on my S8 yesterday and works -
1. Download Shortcut Master from app store (Light version works, but it's a great app, support the dev if you can)
2. Open the app and go to the menu (three dot's top right) and select app explorer
3. Scroll down to IMS Settings and select it.
4. Scroll down to ImsSettingsLauncherActivity (last item on my list) select it and hit launch.
5. Select IMS Service Switch and under that turn on everything on that screen. (For me most things (especially RCS items) were disabled by default, but when I looked at a friends S8+ settings they were all on so I tried that and all works now.)
6. Make video calls!
bunglebp said:
Hiya did this on my S8 yesterday and works -
1. Download Shortcut Master from app store (Light version works, but it's a great app, support the dev if you can)
2. Open the app and go to the menu (three dot's top right) and select app explorer
3. Scroll down to IMS Settings and select it.
4. Scroll down to ImsSettingsLauncherActivity (last item on my list) select it and hit launch.
5. Select IMS Service Switch and under that turn on everything on that screen. (For me most things (especially RCS items) were disabled by default, but when I looked at a friends S8+ settings they were all on so I tried that and all works now.)
6. Make video calls!
Click to expand...
Click to collapse
Video calls were just enabled about a week ago without having to do anything on my end
Please help
I have canada s8+ how to get volte. Please somebody help
bunglebp said:
Hiya did this on my S8 yesterday and works -
1. Download Shortcut Master from app store (Light version works, but it's a great app, support the dev if you can)
2. Open the app and go to the menu (three dot's top right) and select app explorer
3. Scroll down to IMS Settings and select it.
4. Scroll down to ImsSettingsLauncherActivity (last item on my list) select it and hit launch.
5. Select IMS Service Switch and under that turn on everything on that screen. (For me most things (especially RCS items) were disabled by default, but when I looked at a friends S8+ settings they were all on so I tried that and all works now.)
6. Make video calls!
Click to expand...
Click to collapse
Unfortunately, i have Bad news of this VoLTE enable instruction.
From latest G955F Oreo (Android 8.0) update, (G950FXXU1CRAP)
Samsung blocked ImsSetting activity like below screenshot. It need to additional system or Super user permission.
I don't understand why Samsung block this activity. Its very useful UI activity for us.
We should find another method for enable Volte related function.

Categories

Resources