First wanted to make clear that I used google translator for not knowing any English, and as I have found no solution for my case and found this forum that language was the way I found myself trying to communicate with someone who can help me , I thank everyone's attention .
o guys , I got a GT - S4 I9515L of this device.
The same applied to do a software update .
After this update the phone was showing one triangle and a computer .
From what I can read, it is dissem bricar ...
Already downloaded an original rom samobile however it gives error in ODIN
< ID : 0/006 > Initialzation ..
< ID : 0/006 > Get PIT for mapping ..
< ID : 0/006 > There is the PIT partition .
< OSM > All threads completed . ( succeed 0 / failed 1 )
< ID : 0/006 > Removed !!
< ID : 0/006 > Added !!
Says he did not find the partition or something.
From what I noticed , need a PIT file to redo the partition , if I'm right where to find this file
Can someone please help mne
Try a different USB port
Try a different USB cable
A different PC
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
Try a different USB port
Try a different USB cable
A different PC
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
So friend
I've tried to do all this,
Only I have not a PIT file in order to use,
And from what I've researched, with such a file over an original firmeware,
perhaps I may be able to recover my device,
The problem with this finding that such a file.
I thank you the help.
Galera,
Found PIT file GT-I9515L smartphone
I rode it at 3:07 ODIN, the other versions did not yield anything more that circled my phone and was reborn.
Thanks for everyone's help.
mrfroids said:
Galera,
Found PIT file GT-I9515L smartphone
I rode it at 3:07 ODIN, the other versions did not yield anything more that circled my phone and was reborn.
Thanks for everyone's help.
Click to expand...
Click to collapse
Sorry buddy!
I couldnt help much. I have an accountancy exam tomorrow so couldnt revert timely.
Im sorry for the delay. And I'm glad you made it work :')
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
Sorry buddy!
I couldnt help much. I have an accountancy exam tomorrow so couldnt revert timely.
Im sorry for the delay. And I'm glad you made it work :')
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Thanks
ayuda
mrfroids said:
Thanks
Click to expand...
Click to collapse
hola como lo sulucionaste tengo el mismo problema tienes el archivo PIT
@leandro1993: Translation: Hello, as I have the same problem do you have the PIT file?
Per XDA rules, all posts must be in English. If you do not understand English, use a translation website to convert your native tongue to English.
Según las reglas de XDA, todos los mensajes deben estar en Inglés. Si usted no entiende Inglés, utilizar un sitio web de traducción para convertir la lengua nativa de Inglés.
mrfroids said:
Thanks
Click to expand...
Click to collapse
Hi, Brother. my phone it with the same problem as your and exactly the same model as yours. Could you provide me the link in the pit and / or partitioned rom file? thank you!!
Related
Hi,
I had done it, it had worked in my device, if anyone got problem I can try to correct!
Enjoy!
Configuraçoes da Claro??
Ola...voce nao tem um cab para as configuracoes da Claro??
Obrigado
giacomitti said:
Hi,
I had done it, it had worked in my device, if anyone got problem I can try to correct!
Enjoy!
Click to expand...
Click to collapse
i realy apreciate the configs for claro too
Claro
Hello,
if you had the settings I can do it for you!
Please send me!
Sorry for delay
Arnaldo.
Grab it on http://www.giacomitti.eng.br/
Bonjour
SVP Help j'ai essayer de rooter mon telephone en utilisant philz_touch_6.26.6
et maintenant je me trouve bloquer dans le logo samsung GALAXY S5
Help please please please ... : Pleure:: Pleure:: Pleure:: Pleure:
Samsung SM-G900P
manageur said:
Bonjour
SVP Help j'ai essayer de rooter mon telephone en utilisant philz_touch_6.26.6
et maintenant je me trouve bloquer dans le logo samsung GALAXY S5
Help please please please ... : Pleure:: Pleure:: Pleure:: Pleure:
Click to expand...
Click to collapse
vous parlais anglais? ceci est un forum anglais, s'il vous plaît utiliser cette langue
Do a factory reset, see if that works. If not go to download mode flash stock firmware.
Mod Edit
May I remind you of the XDA RULES
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
malybru
Forum Moderator
lingowistico said:
vous parlais anglais? ceci est un forum anglais, s'il vous plaît utiliser cette langue
Do a factory reset, see if that works. If not go to download mode flash stock firmware.
Click to expand...
Click to collapse
Hello
I apologize I dont knew for the language.
I have make factory reset. always nothing
I try to flash with a Rom download since Sammobile always nothing
this is the screenshot of Odin and my phone
cjoint.com/c/EFxrjOgRSF6
cjoint.com/c/EFxrnt6AmF6
manageur said:
Hello
I apologize I dont knew for the language.
I have make factory reset. always nothing
I try to flash with a Rom download since Sammobile always nothing
this is the screenshot of Odin and my phone
cjoint.com/c/EFxrjOgRSF6
cjoint.com/c/EFxrnt6AmF6
Click to expand...
Click to collapse
You probably need to flash partition table (pit file).
Get it here http://forum.xda-developers.com/showthread.php?t=2763157
lingowistico said:
You probably need to flash partition table (pit file).
Get it here http://forum.xda-developers.com/showthread.php?t=2763157
Click to expand...
Click to collapse
No that gives nothing :'(
Why that blocks? that is the Rom? It is necessary to look for a more powerful Rom? or for anything like that? Either there is a security system which blocks
in Downloading mode I have SECURE DOWNLOAD : ENABLE it's normal?
manageur said:
No that gives nothing :'(
Why that blocks? that is the Rom? It is necessary to look for a more powerful Rom? or for anything like that? Either there is a security system which blocks
in Downloading mode I have SECURE DOWNLOAD : ENABLE it's normal?
Click to expand...
Click to collapse
Yes it's normal. Go here and look at step #3. Flash the pit file and the rom you're flashing at the same time.
G900pvpu2bod3
I inderstand where is the probleme but i dont know the solution
My software version is G900PVPU2BOD3, and this Rom is a Factory Reset Protection.
In case you’re wondering what “Factory Reset Protection” actually is, well, it’s a useful security feature in case of device theft. It prevents anyone from resetting your device after being stolen, thereby making it useless for the thief to use.
I thing I must flash my phone with the same ROM "G900PVPU2BOD3" no?
manageur said:
I inderstand where is the probleme but i dont know the solution
My software version is G900PVPU2BOD3, and this Rom is a Factory Reset Protection.
In case you’re wondering what “Factory Reset Protection” actually is, well, it’s a useful security feature in case of device theft. It prevents anyone from resetting your device after being stolen, thereby making it useless for the thief to use.
I thing I must flash my phone with the same ROM "G900PVPU2BOD3" no?
Click to expand...
Click to collapse
Oh. Well try what I said above. Ie flashing pit and rom at the same time. If that doesn't help and your problem really is "factory reset protection" I can't help. Wait for someonw else to reply or go to your local arab cellphone shop they hack theft protection and blacklisted imeis for about 50-100 $.
lingowistico said:
Oh. Well try what I said above. Ie flashing pit and rom at the same time. If that doesn't help and your problem really is "factory reset protection" I can't help. Wait for someonw else to reply or go to your local arab cellphone shop they hack theft protection and blacklisted imeis for about 50-100 $.
Click to expand...
Click to collapse
can you find me this rom please? " G900PVPU2BOD3 "
manageur said:
can you find me this rom please? " G900PVPU2BOD3 "
Click to expand...
Click to collapse
I've sent you a pm since sammobile is forbidden here.
It works, i flash it with G900PVPU2BOD3 and it works
I'M SO HAPPY AND I THANK ALL OF YOU FOR YOUR HELP.
Specially lingowistico YOU ARE THE BEST :good:
Hi , here's my 3rdmodem collection versions
B330 / B370 / B371
MD5 checksum of 3rd modem.img files:
1e7d9308aec9474e602a7e24afb2fb6e B330 md5
e30b7658a5e7a1b59ce36fda2e5a8e92 B370 md5
c62e565c0d50a99cc76a56bf739d0cef B371 md5
You can flash with TWRP this Aroma installer
https://drive.google.com/file/d/0B3kJoB8n78hZV1VHWGdZSDNoR2c/view?usp=sharing
- Choice only one of course
File link is wrong...
memht said:
File link is wrong...
Click to expand...
Click to collapse
Ok , i've change it :good:
Salut ami français, ce modem sert à quoi exactment ? pour le flasher c'est "fastboot flash modem modem.img" ?
In english : Hi, dear french folk, i'm wondering what this modem is for ? can we flash it with a regular command such as "fastboot flash modem modem.img" ?
Gazatus said:
Salut ami français, ce modem sert à quoi exactment ? pour le flasher c'est "fastboot flash modem modem.img" ?
Click to expand...
Click to collapse
@Gazatus
Salut ami,
Désolé, mais ce ne forum français. S'il vous plaît écrire vos messages dans la langue anglaise aussi!
Merci d'avance (Google traduction!)
again in English:
Hello friend,
Sorry about but this is no French forum. Please write your posts in English language too!
Thanks in advance (Google translation!)
and no, we are talking about '3dmodem' in this tread, so please try "fastboot flash 3dmodem 3dmodem.img"
non-toxic said:
@Gazatus
Salut ami,
Désolé, mais ce ne forum français. S'il vous plaît écrire vos messages dans la langue anglaise aussi!
Merci d'avance (Google traduction!)
again in English:
Hello friend,
Sorry about but this is no French forum. Please write your posts in English language too!
Thanks in advance (Google translation!)
and no, we are talking about '3dmodem' in this tread, so please try "fastboot flash 3dmodem 3dmodem.img"
Click to expand...
Click to collapse
Oups, i'm sorry, indeed i've seen that the autor was french, but my question can help someone so i've editied my post to give you a translation of my question.
I've just bought a Honor 7 (not in a store - refurbished) and the screen have been replce... I got a very very bad battery (SOT = less than 1 hour) and the screen colors are bright (even red seems bright), moreover my "smartbutton" don't work. I've bought a battery (Nohon 3100mah) on Aliexpress.
Now i got a very bad cell radio signal reception... I'don't know if it's a software problem or a hardware one... so i'll try to flash a new modem / modified one
Gazatus said:
Oups, i'm sorry, indeed i've seen that the autor was french, but my question can help someone so i've editied my post to give you a translation of my question.
I've just bought a Honor 7 (not in a store - refurbished) and the screen have been replce... I got a very very bad battery (SOT = less than 1 hour) and the screen colors are bright (even red seems bright), moreover my "smartbutton" don't work. I've bought a battery (Nohon 3100mah) on Aliexpress.
Now i got a very bad cell radio signal reception... I'don't know if it's a software problem or a hardware one... so i'll try to flash a new modem / modified one
Click to expand...
Click to collapse
It may be a motherboard issue.
memht said:
It may be a motherboard issue.
Click to expand...
Click to collapse
Yeah i think too... Dam seller, he don't tell me about that ! btw what is "3trmodem" ?
At first i recommend you to make a full wipe followed by a full flash of B180! At my opinion this is at this moment the best piece of Software for our H7!
Otherwise you should check the warranty of your H7! Maybe your seller have to give you some warranty for this phone.
non-toxic said:
At first i recommend you to make a full wipe followed by a full flash of B180! At my opinion this is at this moment the best piece of Software for our H7!
Otherwise you should check the warranty of your H7! Maybe your seller have to give you some warranty for this phone.
Click to expand...
Click to collapse
Thank, the phone comes with B370, i've rooted it and now i'm downgrading to B180, I know that the warranty won't help me, the phone is unlocked and now it has his screen replaced... Many reason to void my warranty. Thank for your help.
Can anyone explain me what is this 3rdmodem ????
Gazatus said:
Thank, the phone comes with B370, i've rooted it and now i'm downgrading to B180, I know that the warranty won't help me, the phone is unlocked and now it has his screen replaced... Many reason to void my warranty. Thank for your help.
Can anyone explain me what is this 3rdmodem ????
Click to expand...
Click to collapse
3rdmodem is a modem partition responsible of drivers for network, it is a standalone partition like system, cust, boot, userdata etc. @Speedo.thc posted them so that we can easily flash them if we are installing ROM, as some ROMs here tends to flash that partition too.
Kies 2 and 3 show messages after insert S/N and model name.
Why?
'GT-I9301I does not support initializing'
xxsen said:
Kies 2 and 3 show messages after insert S/N and model name.
Why?
'GT-I9301I does not support initializing'
Click to expand...
Click to collapse
Try Odin instead.
Or search google for the problem, you should find answers there.
xxsen said:
Kies 2 and 3 show messages after insert S/N and model name.
Why?
'GT-I9301I does not support initializing'
Click to expand...
Click to collapse
Si ha modificado el teléfono ya no funciona.
corraloide said:
Si ha modificado el teléfono ya no funciona.
Click to expand...
Click to collapse
English please, it's the Rulez here.
If you have changed the phone no longer works.
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Issue l5 update
Sadman007 said:
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Click to expand...
Click to collapse
I have the same problem my watch is stuck in 0.0.4 version
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
if I have the firmware file than I could have installed the firmware manually with nrf connect app
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
contact me I managed to manually upgrade
did you have the firmware?
andimachrif said:
did you have the firmware?
Click to expand...
Click to collapse
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Hello,
My watch stands in dfu mode after upgrading a firmware that not worked.
Can someone send me a firmware a the way to flash it manually ?
Thanks
Envoyé de mon Pixel 3 XL en utilisant Tapatalk
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
Can I ask you to submit a firmware file? When updating by Fundo application the smartwatch died.
Could you tell us where to get the firmware file?
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
I think that when we ask for help, it is so that they can provide us with a solution, and not to indicate that they have solved it and not to share the file or the solution, it is not ethical; not in this thread but in everyone. Thank you
Solución al error de actualización del firmware del MicroWear L5
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
jeyviman said:
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
Click to expand...
Click to collapse
Thank you very much.
Worked fine for me.
Sadman007 said:
contact me I managed to manually upgrade
Click to expand...
Click to collapse
Pm sent
Hi, Could soumebody say me where can i found : fundo\frw fundo.zip ?
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Newer version
etimarques said:
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Click to expand...
Click to collapse
Hi etimarques,
The latest firmware is v0.1.2 now. If you install the newest FunDo Pro app from Google Play, you can look for the newest firmware from this app and install it. It stores in the Fundo.zip file, what is mentioned above.
I don't know, whether in your case the titles in the smart watch for every page appear in English or Chinese. I had v0.0.6 firmware when I've bought it, and that time the titles appeared in English. After upgrading the firmware, they became Chinese. Update only if this is fine for you.
P.S.: If you have the v0.0.6 firmware, and the titles are English, could you upload your firmware? I would prefer those titles in English.
Hello..
Is it possible to have the firmware..
I am facing the same problem..
Thanks in advance..
Hello jest w stanie pomóc mi, mój l5 po aktualizacji umarł. Proszę o podanie jego po kolei mam wgrać oprogramowanie.
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
can u please send me this file with firmware?
Old firmware
Hi all,
Not sure if i'm too late on this.
When I first got my L5 9-12months ago or so, it came with 0.0.6 and I got about 6weeks of use for the first three charges.
I updated to 0.1.2 (later to 0.1.3) but I can still consistently only get about a week from a charge now.
I highly doubt this is battery related, as it came exactly as I updated -and after a few months of use prior.
Can anyone PM me the original firmware 0.0.6 if they still have it, or a link to where I can find it pls?
I'm seeing a lot of "i have it", so I'm hoping someone still does.
I'd just like to rule the firmware out of the equation.
Thanks all.