Database Users

[How to] Disable LTE or 4G

This is useful if you have a weak LTE signal or just don't need it always on. I found this tutorial on a different website for another galaxy phone and it works on the Note 3.
1. Turn off your phone and take out your sim card.
2. Turn on your phone with no sim card and wait a minute or two for it to turn on and settle down.
3. Go to the dialer and dial *#2263#
You should see a menu with band selections. The current setting is "Automatic".
(You have to use the menu key to select your options by using "Key Input" to type the number you want)
If you switch to "GSM All", you will be EDGE (2G).
If you switch to "WCDMA All", you will be on HSPA+ (3G, though AT&T and others call it 4G).
4) Power off the phone again and put your sim card back. Upon reboot you should see your new setting in effect.

I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app

inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
If your sim card is out when trying to access the menu it shouldn't say restricted.
Sent from my SAMSUNG-SM-N900A using xda app-developers app

mazdamiata210 said:
If your sim card is out when trying to access the menu it shouldn't say restricted.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Good catch, I completely missed that part of the write up

inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
I tried the above on my S4 and couldn't get LTE back was stuck on wcdma preferred. Google resulted in a ton of information. Ultimately hard reset needed.
Sent from my SM-N900T using Tapatalk 4

inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Yeah that code doesn't work for me. It never worked for my note 2 or note 1 so I wouldn't recommend doing it.
Sent from my SAMSUNG-SM-N900A using xda app-developers app

Limeybastard said:
I tried the above on my S4 and couldn't get LTE back was stuck on wcdma preferred. Google resulted in a ton of information. Ultimately hard reset needed.
Sent from my SM-N900T using Tapatalk 4
Click to expand...
Click to collapse
Sorry about your luck with it, I've never had a problem using it to switch between lte, wcdma, or gsm on my s4 or this note 3. Weird...
Sent from my SAMSUNG-SM-N900A using xda app-developers app

inmotion said:
Sorry about your luck with it, I've never had a problem using it to switch between lte, wcdma, or gsm on my s4 or this note 3. Weird...
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Im stuck now, already posted another thread about this in the S4 section.

Works on Note 3
inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Thank you inmotion! This code actually worked better for me on my Samsung Galaxy Note 3. I didn't even have to pull out my SIM card or reboot. Just dial in the code, go to Device Info and change the preferred radio network type. It changes the radio on the fly in real time, and can be seen at the top.

Since Android 4.3 and on the option to disable LTE/4G has been removed from all AT&T Android devices.

Solarenemy68 said:
Since Android 4.3 and on the option to disable LTE/4G has been removed from all AT&T Android devices.
Click to expand...
Click to collapse
Actually it was before that. Could not do it on my note 1. Would always get RAT restricted. This was on at&t. Other networks were able to use those codes and make the switch.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

1. Download the free Phone info app from the Google Play Store and install it
2. Choose the Phone Information tab and notice the "Set preferred network type" option at the bottom, marked with an arrow at the right of the drop-down menu
3. Tap on the preferred network listing currently in use, and choose the "CDMA auto (PRL)" option from the drop-down list
4. You should be now maintaining connection to only Verizon's 3G network, and whenever you need to use data, you can switch back to LTE for the duration of it
There are numerous other apps and widgets at the Play Store that claim to do the 2G/3G/4G switch, but many users on Verizon have confirmed the Phone info app to be the only method allowing them to reliably turn off the 4G LTE on their Samsung Galaxy S IIIs.

why would people want to disable LTE? (real question)

pham818 said:
why would people want to disable LTE? (real question)
Click to expand...
Click to collapse
I rather disable 3g so I can stay at lte all the time!

netnerd said:
I rather disable 3g so I can stay at lte all the time!
Click to expand...
Click to collapse
Thats what your phone already does...

pham818 said:
Thats what your phone already does...
Click to expand...
Click to collapse
nope. when 4g lte signal is weak, it drops to "4g".

netnerd said:
nope. when 4g lte signal is weak, it drops to "4g".
Click to expand...
Click to collapse
yeah of course,,,, LTE is not covered in all areas....

Does anyone know how to do a network reset? Because I connect to any Data at all no 4G LTE or 3G none of those. I can't send or receive pictures and go on the internet. I tired taking out Sim card for awhile and still didn't work. Does anyone know what to do? And how to reset network?
Sent from my SAMSUNG-SM-N900A using Tapatalk

Does anyone know how to do a network reset? Because I connect to any Data at all no 4G LTE or 3G none of those. I can't send or receive pictures and go on the internet. I tired taking out Sim card for awhile and still didn't work. Does anyone know what to do? And how to reset network?
Sent from my SAMSUNG-SM-N900A using Tapatalk

shaqqq said:
Does anyone know how to do a network reset? Because I connect to any Data at all no 4G LTE or 3G none of those. I can't send or receive pictures and go on the internet. I tired taking out Sim card for awhile and still didn't work. Does anyone know what to do? And how to reset network?
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Reset your APN. Make sure it's att phone
Sent from my SM-N900V using xda app-developers app

Having network issue with octa version, any help?

My provider only uses HSPA +/LTE, the phone always downgrades to hspa (non +) and sometimes 3g which my provider doesn't support so I loose my data connection and it sometimes takes a really long time for it to go back to the proper hspa+ that I need it to use all the time. Anybody knows if I can somehow force the phone to use hspa+ 100% of the time?
Thanks
Sent from my SM-N900 using XDA Premium 4 mobile app

Switch to HSPA+ only mode. Probably wont work with phone calls unless you VOIP.

How??
Sent from my SM-N900 using XDA Premium 4 mobile app

nakedtime said:
Switch to HSPA+ only mode. Probably wont work with phone calls unless you VOIP.
Click to expand...
Click to collapse
You must be mixing up HSPA+ with LTE. I don't think there's a way to choose between HSPA/HSPA+/UMTS, they're all considered 3G or WCDMA (unless you're in Canada.. carriers lie here, those networks shown as 4G are actually 3G)
Sent from my SM-N900W8

Well when my phone shows 3g or hspa I cant get anything to load online, it will stay on this mode for a while sometimes and then as soon as the phone shows hspa+ everything loads perfect. Every othere phone I have bought from Bell mobility in canada show hspa+ all the time.
Sent from my SM-N900 using XDA Premium 4 mobile app

I also had an unlocked Note 2 with exynos processor that did the same thing.
Sent from my SM-N900 using XDA Premium 4 mobile app

Gunner86 said:
Well when my phone shows 3g or hspa I cant get anything to load online, it will stay on this mode for a while sometimes and then as soon as the phone shows hspa+ everything loads perfect. Every othere phone I have bought from Bell mobility in canada show hspa+ all the time.
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just tried making a call with my Note 3 (S800) and it was able to make a call on HSPA+ on TELUS. I think either your location doesn't have good HSPA+ signal / it's overloaded or there's a problem with the phone, does it support all the 3G frequencies Bell uses?
Sent from my SM-N900W8

yulet said:
You must be mixing up HSPA+ with LTE. I don't think there's a way to choose between HSPA/HSPA+/UMTS, they're all considered 3G or WCDMA (unless you're in Canada.. carriers lie here, those networks shown as 4G are actually 3G)
Sent from my SM-N900W8
Click to expand...
Click to collapse
The N9000 doesnt have any LTE radios.

nakedtime said:
The N9000 doesnt have any LTE radios.
Click to expand...
Click to collapse
I know, you said "switch to HSPA+ only but you may not be able to make calls." You can switch to LTE only and you will not be able to make calls. You can make calls on HSPA+.
Sent from my SM-N900W8

Gunner86 said:
How??
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
call #9090#.
Will bring up configuration menu.
Should be tons of radio mode options. One should be HSPA+ only.

Must be the wrong code, *9090* doesn't do anything and *#9090# brings me to a service menu which has no radio settings
Sent from my SM-N900 using XDA Premium 4 mobile app

Bell mobility uses "UMTS/HSPA compatible on 850 and 1900 MHz bands" which is supported by the note 3, I just dont get why both my unlocked exynos note 2 (got rid of it 1 month after I bought it because of this problem) and also the exynos note 3 have this problem on bell mobility in canada.....
Sent from my SM-N900 using XDA Premium 4 mobile app

Gunner86 said:
Must be the wrong code, *9090* doesn't do anything and *#9090# brings me to a service menu which has no radio settings
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can always edit data retry to a smaller number in your build.prop.
"ro.telephony.default_network" is the build.prop entry for which default network you're on. You could figure out which one of those corresponds to HSPA+ (probably through trial and error).
**edit
Oh, you may just have to flash a new modem then O.0
My N9005 is missing quite a few radios at the moment as well.

Wish I could do all of that lol
Sent from my SM-N900 using XDA Premium 4 mobile app

Any other idea's?
Sent from my SM-N900 using XDA Premium 4 mobile app

Maybe there is sime kind of problem with your sim and/or phone...
I'm with Virgin (owned by Bell and same network). My device is switching between 3G and HSPA+... And it's working perfectly fine.
Sent from my SM-N900 with Tapatalk

see if this works:
Settings > More Networks (under connections) > Mobile Networks > Network Mode = choose the option which you like and see if it works.
heads up, even with settings forced from here my network sometimes fluctuates.

Lg g2 d802 asian virsion no 4g

I got d08 and i bought it from hongkong .software virsion is D80210B-SEA-XX
im using it in uk with EE sim but no getting 4G only 3g or h plus
infact in the network menu only WCDMA AND GSM OPTION and no 4g option
can i convert it to EURXX
and will 4g work in it after flashing with euro virsion ?
please help me to sort this
thanks

silverbox750 said:
I got d08 and i bought it from hongkong .software virsion is D80210B-SEA-XX
im using it in uk with EE sim but no getting 4G only 3g or h plus
infact in the network menu only WCDMA AND GSM OPTION and no 4g option
can i convert it to EURXX
and will 4g work in it after flashing with euro virsion ?
please help me to sort this
thanks
Click to expand...
Click to collapse
Type in dialer:
3845#*802#,then the secret menu will come up...Then:
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
Job done...

stefan063 said:
Type in dialer:
3845#*802#,then the secret menu will come up...Then:
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
Job done...
Click to expand...
Click to collapse
great man..thank you very much u are a star..
fixed it working great
thanks

silverbox750 said:
great man..thank you very much u are a star..
fixed it working great
thanks
Click to expand...
Click to collapse
:good: Glad I could help !!! May speed be with you

You may also turn on/off lte thru Settings -> Networks -> Tethering & networks -> Mobile networks -> Network mode.

stefan063 said:
Type in dialer:
3845#*802#,then the secret menu will come up...Then:
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
Job done...
Click to expand...
Click to collapse
how bout for LG G2 Korean version, but I am using this handset here in Canada (FIDO network)
mine's not working too with the 4G and LTE, only 3G alone.

stefan063 said:
Type in dialer:
3845#*802#,then the secret menu will come up...Then:
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
Job done...
Click to expand...
Click to collapse
But this will revert to default after rebooting,is there a way to keep it always like this?

gm007 said:
But this will revert to default after rebooting,is there a way to keep it always like this?
Click to expand...
Click to collapse
I have the same problem. I tried several Roms, no luck yet,

LGHardcore said:
how bout for LG G2 Korean version, but I am using this handset here in Canada (FIDO network)
mine's not working too with the 4G and LTE, only 3G alone.
Click to expand...
Click to collapse
5457#*320# select Global and LTE...not LTE only cause voice calls wont work.
Sent from my LG-F320L using XDA Premium 4 mobile app

I never get the 4G icon just LTE
Sent from my LG-F320L using XDA Premium 4 mobile app

youngpic48 said:
5457#*320# select Global and LTE...not LTE only cause voice calls wont work.
Sent from my LG-F320L using XDA Premium 4 mobile app
Click to expand...
Click to collapse
it doesn't have 'Global' menu there. just Automatic, LTE, WCDMA and GSM only.
but whenever I choose Automatic, it returns to 3G data speeds or WCDMA.

anyways I got into this 4G Data speed but like you have said, I can't accept any calls at all.

Here's some added pictures..
I don't know but i dont see any LTE OR 4G settings at Settings.
?
Sent from my LG-F320K using xda app-developers app

LGHardcore said:
Here's some added pictures..
I don't know but i dont see any LTE OR 4G settings at Settings.
?
Sent from my LG-F320K using xda app-developers app
Click to expand...
Click to collapse
like i said, I managed to turn my data speed into 4G but its impossible for me to get any phone calls. The Black photos were came from the '5457#*320#' step procedures. I don't know what to do its korean version phone

resolving LTE issue
ejerez said:
I have the same problem. I tried several Roms, no luck yet,
Click to expand...
Click to collapse
I had the same issue, i was using the d80210b-SEA, until i flashed the EUR after following the guide and downloading the stock image from http://forum.xda-developers.com/showthread.php?t=2432476
i was able to then enable LTE from prefered networks. which stays after reboot.

have you tried using *#*#4636#*#* ->phone information ->LTE/GSM auto (PRL)?

LGHardcore said:
like i said, I managed to turn my data speed into 4G but its impossible for me to get any phone calls. The Black photos were came from the '5457#*320#' step procedures. I don't know what to do its korean version phone
Click to expand...
Click to collapse
This is the Service Menu for the F320L when I dial 5457#*320#
I select Global+LTE
Sent from my LG-F320L using XDA Premium 4 mobile app

LGHardcore said:
anyways I got into this 4G Data speed but like you have said, I can't accept any calls at all.
Click to expand...
Click to collapse
Scroll to preferred network label above the APN settings.
Sent from my LG-F320L using XDA Premium 4 mobile app

LGHardcore said:
like i said, I managed to turn my data speed into 4G but its impossible for me to get any phone calls. The Black photos were came from the '5457#*320#' step procedures. I don't know what to do its korean version phone
Click to expand...
Click to collapse
Do you see the dropdown arrow? Click that and select SERVICE MENU
Sent from my LG-F320L using XDA Premium 4 mobile app

youngpic48 said:
Do you see the dropdown arrow? Click that and select SERVICE MENU
Sent from my LG-F320L using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The menus were different from yours. thanks thou
---------- Post added at 07:42 AM ---------- Previous post was at 07:37 AM ----------
bgdwiepp said:
have you tried using *#*#4636#*#* ->phone information ->LTE/GSM auto (PRL)?
Click to expand...
Click to collapse
didn't worked. thanks man..

Note 3 has no lte option?

Hi guys I recently got myself a note 3 with videotron here in Canada
I know videotron does not have lte yet but on my phone I don't even have that option
All I have is
WCDMA/GSM(auto connect)
WCDMA ONLY
GSM ONLY
My friend has does same options but has also the LTE option available
My note 3 is a sm-n900w8
Thanks
Sent from my SM-N900W8 using Tapatalk

It depends if your carrier has 4G as I am on Three network UK and I too dont have the LTE option because 4G not out in my area yet but when I changed sim to O2 who already have 4G the LTE option appears.
Sent from my SM-N9005 using XDA Premium 4 mobile app

hon84 said:
It depends if your carrier has 4G as I am on Three network UK and I too dont have the LTE option because 4G not out in my area yet but when I changed sim to O2 who already have 4G the LTE option appears.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ah ok so maybe when they release lte with videotron next year, I guess the option will appear for me too
Sent from my SM-N900W8 using Tapatalk

young_makaveli said:
Hi guys I recently got myself a note 3 with videotron here in Canada
I know videotron does not have lte yet but on my phone I don't even have that option
All I have is
WCDMA/GSM(auto connect)
WCDMA ONLY
GSM ONLY
My friend has does same options but has also the LTE option available
My note 3 is a sm-n900w8
Thanks
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
If you're already rooted go to data/property ,find the persist.radio.lteon.xml file. Open it in Text Editor and if the value that is written is false, change it to true. Save and exit and reboot. Thats it

lesalloum said:
If you're already rooted go to data/property ,find the persist.radio.lteon.xml file. Open it in Text Editor and if the value that is written is false, change it to true. Save and exit and reboot. Thats it
Click to expand...
Click to collapse
Lol I don't even know what rooted means
Sent from my SM-N900W8 using Tapatalk

How can I tell if I'm rooted?
Sent from my SM-N900W8 using Tapatalk

young_makaveli said:
How can I tell if I'm rooted?
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
If you don't know it means you're not
If bought directly from Vidéotron and no modification has been done to your device, you're not rooted
Sent from my SM-N900 with Tapatalk

Any benefits being rooted? Is it like being jailbroken.?
Sent from my SM-N900W8 using Tapatalk

young_makaveli said:
Any benefits being rooted? Is it like being jailbroken.?
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
Rooting has many benefits. The main reason I do it is to uninstall all the bloatware that Samsung saddles you with. My Note 3 came with 25+ useless apps that I can't delete. That's not even counting the 7 that T-Mobile sticks on here. Most of them don't run all the time, but a few do. Like Magazine and the also useless Samsung Siri knockoff. I just use Google voice instead. Another advantage to rooting it would be all the customization options that you would have.

[Q] Selecting LTE Band

Are we able to select the LTE Band we want to use? I assume my N3 is working on Band 3 (1800) & Band 7 (2600).
Is there a way i can just select the phone to use only Band 7?

Scann69 said:
Are we able to select the LTE Band we want to use? I assume my N3 is working on Band 3 (1800) & Band 7 (2600).
Is there a way i can just select the phone to use only Band 7?
Click to expand...
Click to collapse
Dial *#2263# in your stock dialer.

antt00 said:
Dial *#2263# in your stock dialer.
Click to expand...
Click to collapse
Thanks for the reply but I'm getting the error as attached.
sEnt via gALaXy nOte 3

Scann69 said:
Thanks for the reply but I'm getting the error as attached.
sEnt via gALaXy nOte 3
Click to expand...
Click to collapse
What rom/csc are you using? Are you rooted and have you frozen/deleted some stuff.

antt00 said:
What rom/csc are you using? Are you rooted and have you frozen/deleted some stuff.
Click to expand...
Click to collapse
I'm on stock MJ4. Did not delete or freeze anything. Rooted yes but that's only to restore stuff.
sEnt via gALaXy nOte 3

Scann69 said:
I'm on stock MJ4. Did not delete or freeze anything. Rooted yes but that's only to restore stuff.
sEnt via gALaXy nOte 3
Click to expand...
Click to collapse
Then its your csc. I know for sure our Malaysian regional csc support this.
This is the latest ML1 CSC for malaysia
https://app.box.com/s/s1vjyl4mewmwsup25dw0
You can flash it with mobile odin place under cache.

antt00 said:
Then its your csc. I know for sure our Malaysian regional csc support this.
This is the latest ML1 CSC for malaysia
https://app.box.com/s/s1vjyl4mewmwsup25dw0
You can flash it with mobile odin place under cache.
Click to expand...
Click to collapse
Flashing this should not trip my KNOX right? just to confirm...kiasi

Scann69 said:
Flashing this should not trip my KNOX right? just to confirm...kiasi
Click to expand...
Click to collapse
Nope i flash it before and i am on xnote.

antt00 said:
Then its your csc. I know for sure our Malaysian regional csc support this.
This is the latest ML1 CSC for malaysia
https://app.box.com/s/s1vjyl4mewmwsup25dw0
You can flash it with mobile odin place under cache.
Click to expand...
Click to collapse
antt00 said:
Nope i flash it before and i am on xnote.
Click to expand...
Click to collapse
Done....got it working now. Have you tried testing LTE speed based on 1800 and 2600?

Scann69 said:
Done....got it working now. Have you tried testing LTE speed based on 1800 and 2600?
Click to expand...
Click to collapse
No i just set auto. Is there any advantage to fix it ah.

antt00 said:
No i just set auto. Is there any advantage to fix it ah.
Click to expand...
Click to collapse
Well....band 3 (1800) is good for penetration so if where you are, signal is weak, there is a high chance you're on band 3 but that does not mean it's fast cos signal strength does not equal to performance. band 7 (2600) signal could be weak but there are lesser users so performance could be better.
The attached pictures shows the performance between the two bands. on band 3, i get 3 bars of signal while on band 7, i get only 1 bar but the download speed is almost double.
Just my little understanding on LTE. hope that helps and if i'm wrong.....kindly correct me.

Interesting findings. What to you using?
Sent from my SM-N9005 using XDA Premium 4 mobile app

Hello there, i cannot change the Lte only band. When using the Advance signal status i have a force stop error. Any solution?

antt00 said:
No i just set auto. Is there any advantage to fix it ah.
Click to expand...
Click to collapse
antt00 said:
Interesting findings. What to you using?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You cannot just keep at a single band all the time. Reason being is not everywhere has good signal for band 3 and band 7 so depending on the area you are at and if you are working and require fast connection, if you are connected to 4G and assuming the speed is slow, you can then change band to see if it helps. In my case, when i'm at home, i'll just switch to band 7 cos it's way faster and this way i make sure it does not switch to band 3 which is slower.
It's extra work to be switching bands but again, it's only if you need the speed and since we know how to, just make full use of the 4G connection

Scann69 said:
You cannot just keep at a single band all the time. Reason being is not everywhere has good signal for band 3 and band 7 so depending on the area you are at and if you are working and require fast connection, if you are connected to 4G and assuming the speed is slow, you can then change band to see if it helps. In my case, when i'm at home, i'll just switch to band 7 cos it's way faster and this way i make sure it does not switch to band 3 which is slower.
It's extra work to be switching bands but again, it's only if you need the speed and since we know how to, just make full use of the 4G connection
Click to expand...
Click to collapse
Haiya just realized I type wrong. Meant to ask what telco you using.
Sent from my SM-N9005 using XDA Premium 4 mobile app

antt00 said:
Haiya just realized I type wrong. Meant to ask what telco you using.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maxis.....very old data plan

Any way we can do this on UK csc?
Sent from my SM-N9005 using Tapatalk

alom5 said:
Any way we can do this on UK csc?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Not sure but you can try running the code and see if you get the menu to select

Nothing happens when running the code
Sent from my SM-N9005 using Tapatalk