Related
New update is up!
Version is : V100R001C00B528G001
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDEyNTU=
Upgrade How-to
It has all languages android have!
This upgrade need to accomplish 1 upgrade package’s upgrade in the one step below, the file name can’t be revised:
Step1: include UPDATE.APP
- Prepare a formatted Micro SD card which at least has 512MB available space. Make sure your handset is powered off and then insert the MICRO SD card into the handset.
- Make a “dload” directory on SD card root directory
- Copy the “Step 1\ dload\UPDATE.APP” to SD card.
- Long press volume up + volume down + power button on the handset to startup you device until device into upgrade model, the handset will upgrade and shutdown automatically.
- After upgrade success , Restart the handset.
- It will reboot few times.
- Check the Build number is 100R001C00B528G001 . You can see it in “Settings”->”About Phone”..
Possible bugs!
- When the wifi open and screen is off phone reboots.
- Some phone gets imei=0 (please backup your imei)
- Not sure but I have network issues. Sometimes my phone gets "unreachable" state even I have 4 bars.
- There is a widget problem, "The widget loading problem" after each reboot.
- On calls your sound is very husky. You can try to solve changing build.prop "ro.config.dualmic=true" to "ro.config.dualmic=false"
- Some users reported screen lag, freezes and and glicthes.
- Sound (your sound from calls) not very good.
- Widgets get "The problem loading widget" on every reboot.
- Haptic feedback not work on capatitive keys.
Warnings!
- There is no safe way for downgrading.
Downgrading!
I go back to cm7 like this;
- Copy B138 dload to internal memory - This is important.
Power off your phone go to pink screen. Notice: you can't go the pink scren without sd-card. So, after copying dload directory insert sd card.
- Go to pink screen
- In pink screen, I replace all the files from my 2.2 backup. (If you don't do that, downgrade not work. Its failed step 2/2)
- Remove sdcard from phone and start the B138 update like always.
- After installing phone should open normally.
- Once your phone open normally, you can install cwm and flash any rom you want it.
I noticed cwm data backups not works, I don't know why its not worked. Maybe some experience person can explain that to us.
- Please notice, Even if this version worked on my phone, that doesn't mean it will work for you. You can try, I'm not responsoble of anything
Mirrors for those who hates china internet connection speeds too:
http://www.uploadstation.com/file/DBH479d
http://ul.to/3qi60wcj
http://www.fileserve.com/file/FmWvum2/U8800_V100R001C17B517G001_Tommix_China_sucks.zip
http://www.filesonic.cz/file/4048086954
http://uploadbox.com/files/1d337e044c
http://www.crocko.com/85045EFF9D6E4...00_V100R001C17B517G001_Tommix_China_sucks.zip
Epic fail. Its don't include market or gapps!
Cannot download, seems fine until downloaded the half size and after that goes very fast to end, resulting a damaged archive. Maybe too many trying to download?
Anyway how you find these links?
If from that page press the label to go to index, I cannot find this link. the froyo rom, not this link.
Özgürce said:
Epic fail. Its don't include market or gapps!
Click to expand...
Click to collapse
really? what is wrong with this people?
Can someone please re-upload it to another site I got a corrupted download
Sent from my u8800 using xda premium
Mirrors
Uploaded to some mirrors as Huawei site is taking forever to download.
Mirror 1
Mirror 2
Mirror 3
Mirror 4
Mirror 5
Hope this goes faster! http://www.mediafire.com/?doievioa1ybb9zn
Hayden18 said:
Can someone please re-upload it to another site I got a corrupted download
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
maybe you can try this link : http://115.com/file/c2bu9jd6#
someone download from the official website and upload to the above website
why dyou even want to install this without market? I mean... seriously, no market? rofl
swayjd said:
why dyou even want to install this without market? I mean... seriously, no market? rofl
Click to expand...
Click to collapse
try installing market.apk ......
will someone post quadrant score plz
Hayden18 said:
Can someone please re-upload it to another site I got a corrupted download
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
Give me 10 minutes and I'll re-upload it.
What about installing instructions?
The pdf file in package is in Chinese.
sport_billy said:
What about installing instructions?
The pdf file in package is in Chinese.
Click to expand...
Click to collapse
Try this to translate...... http://translate.google.com/
PDF contains as fallows
11-30 Page 1 of 2
U8800 Gingerbread upgrade instructions
Reminder: 1, This package only applies to U8800, other models including U8800 + / U8800Pro are not
Using the software package in the "Settings" menu -> "About phone" menu to view models.
2, provides the official temporarily retreated from Android2.3 Android2.2 way back.
3, Brush risk, machine You need to be cautious.
1, note
a) upgrade process will erase all user data (such as contacts, SMS, MMS, etc.), the
Please be sure to upgrade before your users to backup data to an external SD card or computer.
b) Make sure the battery before upgrading to support more than 30 minutes to ensure complete support of the upgrade process.
2, the version of the functional description
This version, based on the original version of Froyo, mainly to do the following changes:
a) upgrade to the Gingerbread 2.3.5 version of the Android version.
b) In the original version of Android adds ease of use UI features and better functionality of Huawei, to better enhance the user
Use of experience.
3, the upgrade procedure
3.1 from Android 2.2.2 upgrade to Android 2.3.5 guide
This upgrade requires the following two step CPC 2 upgrade package upgrade, all file names can not be changed:
step 2 contains UPDATE.APP (G version of the function of the main package).
step 3 contains UPDATE.APP (indicated by package carriers).
3.1.1 Prepare a capacity of not less than 512M SD card;
3.1.2 SD card root directory create dload directory, copy the update step 2 in UPDATE.APP to dload
? ? ?
?
2011-11-30 Page 2 of 2
Directory, the phone off, the SD card into the phone, the (left thumb) while holding the volume up and down keys,
And (right) press the power button to turn the phone will automatically upgrade, the phone automatically shut down after the upgrade is complete, remove the
SD card;
3.1.3 step3 in UPDATE.APP replaced with an SD card dload directory UPDATE.APP, repeat
Step 3.1.2, in order to upgrade step 3 UPDATE.APP (while holding the volume down key, long press the Power
Key to boot).
3.1.5 upgrade is successful, the phone reboot to restore the factory into the interface to restore the factory is completed, the phone re-re-
Kai. Complete Android 2.3.5 version of the full upgrade.
3.1.6 Make sure the version number after boot as U8800V100R001C17B517G001, in the "Settings" menu
-> "About phone" menu, check the version number.
krish_nank said:
Try this to translate...... http://translate.google.com/
Click to expand...
Click to collapse
Thank you.I did that.
I want human translation.
If someone who speaks chinese can translate this it would be very helpfull.
286420123 said:
OK,i really doubt if you are mentally impaired,the rom is only a trial one , and only for trial in china , it is only uploaded in chinese local host,if you really want to say sth,i'll give you the reason that you country is so ..... that can't aford the expense of the international data exchange ,so you can only have a **** speed,if you want to speed up , you can just migrate!
Click to expand...
Click to collapse
Trial version means wont work after few days or is it like only testing purpose??? ...
Added root insruction. Its way too easy.
Another Mirrors for those who hates china internet connection speeds too:
http://ul.to/3qi60wcj
http://www.uploadstation.com/file/DBH479d
http://www.fileserve.com/file/FmWvum2/U8800_V100R001C17B517G001_Tommix_China_sucks.zip
http://www.filesonic.cz/file/4048086954
http://uploadbox.com/files/1d337e044c
http://www.crocko.com/85045EFF9D6E4...00_V100R001C17B517G001_Tommix_China_sucks.zip
To late, just upgraded to a Samsung galaxy note
my last ever Huawei, their after sales support sucks for every phone, why can Korea make better products than China? Better support, better phones, higher quality, China keep trying and keep failing in the support part of most products for some reason, I can't figure out if its a culture thing or a government thing that makes them not care about their customers
Sent from my GT-N7000 using XDA App
First of all i would like to say a massive thanks to:
- Cj360 for the epic Jelly bean Rom
- Cosmicdan for his awesome kernel
- Lupus as well for his awesome kernel
- And everyone else who made this Rom possible, I thank all of you !!
So now with the intro, I'm new to the forum and i shall be testing different Rom's and kernels and giving feedback mainly on the Xperia play R800i and the Xperia x10 mini pro U20i, recently I've been trying a lot of different Rom's and i stumbled acrossed this JB slim Rom (For the Xperia play) and i was extremely impressed with its performance. The interface is simply stunning, blazing fast and built firmly compared to other ICS and JB Rom's.
Here are some of the specs i gathered from my phone's settings
- Operating system, 4.1.2 Android Jellybean
- Model Number, R800i
- Slim version, Slim-3.1.0-20130202-2346-UNOFFICIAL
- GSM ( Note GSM Version is for UK only)
- Kernel Version
2.6.32.9-Turbo_v3.1 [email protected], #66
- Rooted (Built within the kernel, Both Cosmicdans and Lupus)
[ I have attached some screen shots of this Rom ]
If you have an Xperia play i would highly suggest trying this out, as it is one of the best I've seen on xda:
Here is the link to the thread: http://forum.xda-developers.com/showthread.php?t=1975851
Installation Guide [For people who do not know how to install anything]
DISCLAIMERS
Before you start anything, I'm not responsible for any: Bricked devices, dead SD cards, boot-loops, etc (You know the drill). You do this of your own free will
Ok with all the serious chat aside lets begin. Firstly you will need the following:
- Unlocked boot-loader -----> Follow this guide from Sony:
http://unlockbootloader.sonymobile.com/
- Flash tool -------> Get that from here:
http://androxyde.github.com/
- The Slim-bean Rom -----> Download slim-bean in Second post, pick GSM or CDMA depending on where you are:
http://forum.xda-developers.com/showthread.php?t=1975851
Below are two links i found showing all countries that use GSM and CDMA, hope it helps ! (If your still confused do a little bit of research !)
GSM -----> http://www.worldtimezone.com/gsm.html
CDMA -----> http://www.cdg.org/worldwide/index.asp - The kernel -----> Get either Lupus or CosmicDans turbo kernel (There both epic!)
Lupus kernel from here
http://forum.xda-developers.com/showthread.php?t=1861970
Turbo Kernel from here
http://forum.xda-developers.com/showthread.php?t=1817548
- AND A VERY IMPORTANT THING YOU MUST HAVE IS ..... patience's
Ok if you have everything lets start the guide (Note: Make sure everything is done on windows 7, as its easier than older versions of windows)
1. Before we do anything make sure that you have a unlock boot-loader and you have a downloaded the following files:
- The Rom itself ---> http://forum.xda-developers.com/showthread.php?t=1975851
- The Google apps -----> http://goo.im/gapps/gapps-jb-20121011-signed.zip
- The Kernal -----> I did Turbo Kernal http://www.mediafire.com/?ncgvp2qcuns9m (NOTE: PICK ZEUS as that is the code name for Xperia play)
- Flash tool -----> http://androxyde.github.com/
- Fast boot Package -----> http://db.tt/B5vG1ynM
- R800i_4.0.2.A.0.62_phoenixvendor.ftf ------> https://docs.google.com/file/d/0B3UZttldr317Zm4xRnQ2WkRFbHM/edit?pli=1
2. Preparing your phone, make sure that you usb debug mode on and file transfer to MSC and allow unknown applications. Next you must connect your phone to your computer or laptop via usb, and open up flashtool and remember to install the drivers, they are located in C:\Flashtool\drivers and install the xperia play driver, fastboot driver and flash mode drivers. (MAKE A BACKUP OF ALL YOUR FILES IF YOU HAVE TO)
3. Go into flash-tool and select flash (Its a lightning sign) and then press flash and open up the directory where you downloaded the R800i_4.0.2.A.0.62_phoenixvendor.ftf and flash it. Wait a few secs or minutes depending on your computer/ laptops speed, then a dialog will open telling you to shutdown your phone so shutdown and wait until its completely off. Now connect the end cable to your Xperia play and hold the back button and connect your USB into the computer and wait for it to flash. This can take some time and you must keep hold of the back button until its completed. After completion it will ask for you to unplug the USB and turn on your phone so do so, then it will launch up the Sony sign and it will pretty much look like the original firmware you had before. Now moving on, once booted up you must skip all settings and wait for the phone to fully load once the set up is done go back to setting and make sure again that USB debug mode is on, unknown sources is enabled and it is in MSC mode. (Note for CDMA R800x users you don not need to flash the R800i_4.0.2.A.0.62_phoenixvendor.ftf )
4. Now connect the usb to the computer/laptop and place the Rom and Gapps onto your sdcard (Make a folder called Custom Rom). and then disconnect the usb after thats done.
5. Now this is were it can get complicated, so please pay attention. You must now shutdown the phone and disconnect it from the computer. Extract the fast boot package (Note: i would recommend to do this all on windows 7) and place it on desktop. Now drop the kernal you downloaded into the same folder (In this case i picked Turbo kernal, so i place it in the same folder). And holding the SHIFT KEY + RIGHT CLICK will open up a little menu (like when you right click anyway) and so you click on open command prompt here (CMD). ok now you type in the following code (In this case the turbo kernal) :
Fastboot flash boot boot_zeus_turbo-v3.1.img
Now it will say waiting for device so you now have to have you xperia play of and hold the search button and plug your usb back in then it will start transferring the kernel onto your xperia play, wait until it has finished and then disconnect your phone and boot it up.
6. You should see the sony sign and the Turbo sign underneath at this point you have to keep press the volume down button -
and then you will enter into a screen where it shows slot 1, 2, 3 and 4. So press slot 1 and then it should say: Boot, TWRP recovery, change slot and Tweaks and mods. So press recovery and then you will come to a screen with different options. First you need wipe data so goto wipe and do a factory reset and then go back and wipe dalvik cache and go back again and wipe cache.
7. Now you must go back and press install and it will show you, your sd card so now you must go to the folder that you name 'Custom rom', like i said before and now install the slim rom, it will ask you to swipe to install so do so and then restart your phone !!. (WARNING DO NOT INSTALL GAPPS STRAIGHT AFTER INSTALLATION OF ROM, INSTALL ROM AND THEN REBOOT AT LEAST ONCE BEFORE FLASHING GAPPS).
8. So now you have rebooted your phone, you should see after the sony sign, the world 'Slim bean' flashing. Wait a bit for it to boot up and then fill out the basic installation form.
9: restart the phone and install Gapps through recovery but do NOT WIPE DALVIK CACHE OR CLEAR CACHE OR FACTORY RESET, just install the gapp zip the same way you installed the rom in 'Custom Rom' folder and then restart.
10. you should have google apps now but the screen might look very small at first and so to fix this press: Menu button> System settings> Interface> Genral UI > LCD density and follow the steps. (This fixes issues with the screen and allows you to use apps like Facebook)
11. The final step of course is to enjoy your new Jelly Bean 4.1.2 Rom and Remember to thank everyone who made this Rom possible!!
So all in all i would highly recommend this, if you currently hold a Xperia play and your fed up with gingerbread then try this out, you won't be disappointed !!
Did i miss anything, if so reply back and i'll do my best to answer your question.
- EpicAsianGuy
_______________________________________________________________________________________________________________________
My Device's
Xperia Play: Jelly Bean [Slim Rom] - Android 4.1.2
Turbo Kernel by cosmicdan
Unlocked Boot Loader
Model R800i
Xperia x10 mini pro: Unlocked boot-loader
Model U20i
Slim Rom - Android 4.1
nAa JB kernel
Please respect everyone in the forum, follow the rules and be friendly ________________________________________________________________________________________________________________________
Re: [JB] Slimbean for Xperia play Review (Thanks to; cj360, cosmic dan and lupus)
This is a rather good guide. You might want to change the title. By saying "review" it could give the impression that you were just giving your opinions on the ROM. I used this guide to put slimbean on my Play and i found it easy to follow and understand. However, transferring my apps and data is such a pain:banghead:. I bought TB Pro as well but it tends to hang which leads to frustration as i have to go through the process of which apps i want restored and which ones i don't again and again. It's quite tedious and slow. Anyone know how to make it work "properly" or an alternative?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
Thanks for the reply
UndisputedGuy said:
This is a rather good guide. You might want to change the title. By saying "review" it could give the impression that you were just giving your opinions on the ROM. I used this guide to put slimbean on my Play and i found it easy to follow and understand. However, transferring my apps and data is such a pain:banghead:. I bought TB Pro as well but it tends to hang which leads to frustration as i have to go through the process of which apps i want restored and which ones i don't again and again. It's quite tedious and slow. Anyone know how to make it work "properly" or an alternative?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
Click to expand...
Click to collapse
Thank you for the reply
I look forward to make more installation guides for people in the xda community and i agree i think i should change the title from 'Review' to 'Installation' (My bad sorry ). This is my first installation guide and i'm very happy that you were able to use it and install the slim Rom, as for the apps i think if you have a Google account anyway you should be able to backup your apps from your previous firmware e.g. Gingerbread. I think if you go to Play store then press menu and go to 'My apps' you should be able to see apps installed and previous apps installed if you swipe to the right (However you have to install them individually). I know how you feel though I've been trying different Roms and every time i find myself re-installing and backing up a lot of data, but for now i'm not sure if there is fix or an alternative for TB pro. But i would suggest backing them up manually for now via play store, until there is a way to do it all at once. But nevertheless I will try my best to give installation for all different roms (Hopefully for all phones), making it simpler and helpful for people to understand. Currently i'm studying in college but when i have time i will post different Rom installation guide, but for now thank you.
- Epic Asian Guy
Re: [JB] Slimbean for Xperia play Review (Thanks to; cj360, cosmic dan and lupus)
Thank you for the guide
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
UndisputedGuy said:
Thank you for the guide
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
Click to expand...
Click to collapse
Not a problem at all dude, I'm here to help everyone and i will try my best
can u upload to another link for the - R800i_4.0.2.A.0.62_phoenixvendor.ftf ------> https://docs.google.com/file/d/0B3UZ...bHM/edit?pli=1
i cant download this via IDM...its sucks dwnloading via normal firefox dwnloader since its 231mb ftf files
ive try searching/googling...there's 1 on 4shared but its not resumable...dwnload always stops at 80%...
andydidacus said:
can u upload to another link for the - R800i_4.0.2.A.0.62_phoenixvendor.ftf ------> https://docs.google.com/file/d/0B3UZ...bHM/edit?pli=1
i cant download this via IDM...its sucks dwnloading via normal firefox dwnloader since its 231mb ftf files
ive try searching/googling...there's 1 on 4shared but its not resumable...dwnload always stops at 80%...
Click to expand...
Click to collapse
uploading now, not sure if IDM works with devhost but if it doesn't then get some1 else to mirror it as i have s%&£ upload speed
Odp: [JB] Slimbean for Xperia play Guide (Thanks to; cj360, cosmic dan and lupus)
Good guide, noob friendly. I was just about to whine but I haven't found anything useless here although just edit the first post with flashing kernel via flash tool as it's much quicker and easier for everybody.
And it's called kernEl not kernal
Wysłane z mojego R800i za pomocą xda premium
---------- Post added at 08:54 PM ---------- Previous post was at 08:52 PM ----------
andydidacus said:
can u upload to another link for the - R800i_4.0.2.A.0.62_phoenixvendor.ftf ------> https://docs.google.com/file/d/0B3UZ...bHM/edit?pli=1
i cant download this via IDM...its sucks dwnloading via normal firefox dwnloader since its 231mb ftf files
ive try searching/googling...there's 1 on 4shared but its not resumable...dwnload always stops at 80%...
Click to expand...
Click to collapse
It's a great hosting, no captcha, no waiting, full speed. Just download it without IDM...
Wysłane z mojego R800i za pomocą xda premium
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
EpicAsianGuy said:
Currently i'm studying in college but when i have time i will post different Rom installation guide, but for now thank you.
- Epic Asian Guy
Click to expand...
Click to collapse
Well don't get me wrong but all you actually have to change are just few lines in the thread and the title of the thread... Seriously, it's good that you've created such guide but come on, creating like 10-20 threads for different roms which doesn't actually differ much in the installation process? Come on, it's just bad...
Wysłane z mojego R800i za pomocą xda premium
i followed ur guide..when im istalling the slim rom swipe it then fialed..why is that?? pls specified which version of slim rom pleaseeeeeeeee
great guide but it doesn't really need to be specific to this one rom.
Sent from my R800i using Tapatalk 2
fma965 said:
great guide but it doesn't really need to be specific to this one rom.
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
i know..but which version does he actualy flashed...i never see any of custom rom for xperia that has md5 checksum...u know ive been posting a lot.. and i dwnloaded a lott and redwonload a lot and i tried flashing a lott custom rom following thier guidance including this 1 but all failed..missing files etc $%^&$%%^%*$%^&*
why is there no MD5 CHECKSUM ON THE ROM...only kernels ive seen have MD5 C_SUM
How would I revert back?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
Thank you for the guide it works awesome!!, I has tested it for a week and some times the phone restart by it self, have you heard about it?
cabrera_drt said:
Thank you for the guide it works awesome!!, I has tested it for a week and some times the phone restart by it self, have you heard about it?
Click to expand...
Click to collapse
Yeah thats a common problem though ive never had it myself but its not going to be fixed because theyre working on a new rom 4.2.2
Sent from my Xperia Play (r800x)
UndisputedGuy said:
This is a rather good guide. You might want to change the title. By saying "review" it could give the impression that you were just giving your opinions on the ROM. I used this guide to put slimbean on my Play and i found it easy to follow and understand. However, transferring my apps and data is such a pain:banghead:. I bought TB Pro as well but it tends to hang which leads to frustration as i have to go through the process of which apps i want restored and which ones i don't again and again. It's quite tedious and slow. Anyone know how to make it work "properly" or an alternative?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
Click to expand...
Click to collapse
I like Appextractor from AppsbyAndy. It lets you extract your apps from a nandroid backup. It's not perfect, sometimes apps are missing, but I like it WAY better than TIBU. The only thing I use TiBu for anymore is removing system apps I don't want.
swing4thefence said:
I like Appextractor from AppsbyAndy. It lets you extract your apps from a nandroid backup. It's not perfect, sometimes apps are missing, but I like it WAY better than TIBU. The only thing I use TiBu for anymore is removing system apps I don't want.
Click to expand...
Click to collapse
Thanks, it's likely that I'll check it out
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
Awesome rom; but with a big flow
EpicAsianGuy said:
First of all i would like to say a massive thanks to:
- Cj360 for the epic Jelly bean Rom
- Cosmicdan for his awesome kernel
- Lupus as well for his awesome kernel
- And everyone else who made this Rom possible, I thank all of you !!
So now with the intro, I'm new to the forum and i shall be testing different Rom's and kernels and giving feedback mainly on the Xperia play R800i and the Xperia x10 mini pro U20i, recently I've been trying a lot of different Rom's and i stumbled acrossed this JB slim Rom (For the Xperia play) and i was extremely impressed with its performance. The interface is simply stunning, blazing fast and built firmly compared to other ICS and JB Rom's.
Here are some of the specs i gathered from my phone's settings
- Operating system, 4.1.2 Android Jellybean
- Model Number, R800i
- Slim version, Slim-3.1.0-20130202-2346-UNOFFICIAL
- GSM ( Note GSM Version is for UK only)
- Kernel Version
2.6.32.9-Turbo_v3.1 [email protected], #66
- Rooted (Built within the kernel, Both Cosmicdans and Lupus)
[ I have attached some screen shots of this Rom ]
If you have an Xperia play i would highly suggest trying this out, as it is one of the best I've seen on xda:
Here is the link to the thread: http://forum.xda-developers.com/showthread.php?t=1975851
Installation Guide [For people who do not know how to install anything]
DISCLAIMERS
Before you start anything, I'm not responsible for any: Bricked devices, dead SD cards, boot-loops, etc (You know the drill). You do this of your own free will
Ok with all the serious chat aside lets begin. Firstly you will need the following:
- Unlocked boot-loader -----> Follow this guide from Sony:
http://unlockbootloader.sonymobile.com/
- Flash tool -------> Get that from here:
http://androxyde.github.com/
- The Slim-bean Rom -----> Download slim-bean in Second post, pick GSM or CDMA depending on where you are:
http://forum.xda-developers.com/showthread.php?t=1975851
Below are two links i found showing all countries that use GSM and CDMA, hope it helps ! (If your still confused do a little bit of research !)
GSM -----> http://www.worldtimezone.com/gsm.html
CDMA -----> http://www.cdg.org/worldwide/index.asp - The kernel -----> Get either Lupus or CosmicDans turbo kernel (There both epic!)
Lupus kernel from here
http://forum.xda-developers.com/showthread.php?t=1861970
Turbo Kernel from here
http://forum.xda-developers.com/showthread.php?t=1817548
- AND A VERY IMPORTANT THING YOU MUST HAVE IS ..... patience's
Ok if you have everything lets start the guide (Note: Make sure everything is done on windows 7, as its easier than older versions of windows)
1. Before we do anything make sure that you have a unlock boot-loader and you have a downloaded the following files:
- The Rom itself ---> http://forum.xda-developers.com/showthread.php?t=1975851
- The Google apps -----> http://goo.im/gapps/gapps-jb-20121011-signed.zip
- The Kernal -----> I did Turbo Kernal http://www.mediafire.com/?ncgvp2qcuns9m (NOTE: PICK ZEUS as that is the code name for Xperia play)
- Flash tool -----> http://androxyde.github.com/
- Fast boot Package -----> http://db.tt/B5vG1ynM
- R800i_4.0.2.A.0.62_phoenixvendor.ftf ------> https://docs.google.com/file/d/0B3UZttldr317Zm4xRnQ2WkRFbHM/edit?pli=1
2. Preparing your phone, make sure that you usb debug mode on and file transfer to MSC and allow unknown applications. Next you must connect your phone to your computer or laptop via usb, and open up flashtool and remember to install the drivers, they are located in C:\Flashtool\drivers and install the xperia play driver, fastboot driver and flash mode drivers. (MAKE A BACKUP OF ALL YOUR FILES IF YOU HAVE TO)
3. Go into flash-tool and select flash (Its a lightning sign) and then press flash and open up the directory where you downloaded the R800i_4.0.2.A.0.62_phoenixvendor.ftf and flash it. Wait a few secs or minutes depending on your computer/ laptops speed, then a dialog will open telling you to shutdown your phone so shutdown and wait until its completely off. Now connect the end cable to your Xperia play and hold the back button and connect your USB into the computer and wait for it to flash. This can take some time and you must keep hold of the back button until its completed. After completion it will ask for you to unplug the USB and turn on your phone so do so, then it will launch up the Sony sign and it will pretty much look like the original firmware you had before. Now moving on, once booted up you must skip all settings and wait for the phone to fully load once the set up is done go back to setting and make sure again that USB debug mode is on, unknown sources is enabled and it is in MSC mode. (Note for CDMA R800x users you don not need to flash the R800i_4.0.2.A.0.62_phoenixvendor.ftf )
4. Now connect the usb to the computer/laptop and place the Rom and Gapps onto your sdcard (Make a folder called Custom Rom). and then disconnect the usb after thats done.
5. Now this is were it can get complicated, so please pay attention. You must now shutdown the phone and disconnect it from the computer. Extract the fast boot package (Note: i would recommend to do this all on windows 7) and place it on desktop. Now drop the kernal you downloaded into the same folder (In this case i picked Turbo kernal, so i place it in the same folder). And holding the SHIFT KEY + RIGHT CLICK will open up a little menu (like when you right click anyway) and so you click on open command prompt here (CMD). ok now you type in the following code (In this case the turbo kernal) :
Fastboot flash boot boot_zeus_turbo-v3.1.img
Now it will say waiting for device so you now have to have you xperia play of and hold the search button and plug your usb back in then it will start transferring the kernel onto your xperia play, wait until it has finished and then disconnect your phone and boot it up.
6. You should see the sony sign and the Turbo sign underneath at this point you have to keep press the volume down button -
and then you will enter into a screen where it shows slot 1, 2, 3 and 4. So press slot 1 and then it should say: Boot, TWRP recovery, change slot and Tweaks and mods. So press recovery and then you will come to a screen with different options. First you need wipe data so goto wipe and do a factory reset and then go back and wipe dalvik cache and go back again and wipe cache.
7. Now you must go back and press install and it will show you, your sd card so now you must go to the folder that you name 'Custom rom', like i said before and now install the slim rom, it will ask you to swipe to install so do so and then restart your phone !!. (WARNING DO NOT INSTALL GAPPS STRAIGHT AFTER INSTALLATION OF ROM, INSTALL ROM AND THEN REBOOT AT LEAST ONCE BEFORE FLASHING GAPPS).
8. So now you have rebooted your phone, you should see after the sony sign, the world 'Slim bean' flashing. Wait a bit for it to boot up and then fill out the basic installation form.
9: restart the phone and install Gapps through recovery but do NOT WIPE DALVIK CACHE OR CLEAR CACHE OR FACTORY RESET, just install the gapp zip the same way you installed the rom in 'Custom Rom' folder and then restart.
10. you should have google apps now but the screen might look very small at first and so to fix this press: Menu button> System settings> Interface> Genral UI > LCD density and follow the steps. (This fixes issues with the screen and allows you to use apps like Facebook)
11. The final step of course is to enjoy your new Jelly Bean 4.1.2 Rom and Remember to thank everyone who made this Rom possible!!
So all in all i would highly recommend this, if you currently hold a Xperia play and your fed up with gingerbread then try this out, you won't be disappointed !!
Did i miss anything, if so reply back and i'll do my best to answer your question.
- EpicAsianGuy
_______________________________________________________________________________________________________________________
My Device's
Xperia Play: Jelly Bean [Slim Rom] - Android 4.1.2
Turbo Kernel by cosmicdan
Unlocked Boot Loader
Model R800i
Xperia x10 mini pro: Unlocked boot-loader
Model U20i
Slim Rom - Android 4.1
nAa JB kernel
Please respect everyone in the forum, follow the rules and be friendly ________________________________________________________________________________________________________________________
Click to expand...
Click to collapse
I loved the performance of the rom. True jb feel with amazing customization tweets. Checked high end game FIFA12. Works great.
But the rom ultimately is useless for me until you come up with a gamepad and touch pad fix.
WE HAVE XPERIA PLAY. But without the gamepad working; gives such an ordinary feel. sorry.
PLEASE REPLY.
thanks for the guide, very usefull for me..:good:
jeetbudhwani said:
I loved the performance of the rom. True jb feel with amazing customization tweets. Checked high end game FIFA12. Works great.
But the rom ultimately is useless for me until you come up with a gamepad and touch pad fix.
WE HAVE XPERIA PLAY. But without the gamepad working; gives such an ordinary feel. sorry.
PLEASE REPLY.
Click to expand...
Click to collapse
I am with you on that.gamepad+touchpads support=perfect jb rom.
Sent from my R800i using xda app-developers app
Thank you so much :good:
Rooting jellybean ROM 4.2.2-
1.Rooting A120 stock rom is very simple
2.Download and install the framaroot app attached below
3.Open framaroot and select install supersu
4.Choose the 3rd method (Barahir)
5.Now install busybox from play store
6.You are now rooted
Rooting stock ROM 4.4.2-
1.First you need to flash CTR recovery
2.Replace default recovery.img is sp flashable files with this one
3.Open sptools and select scatter file
4.Now untick everything except recovery and click download
5.Now reboot and place the subinst_signed.zip in your sdcard
6.Reboot into recovery and flash the zip now
7.Reboot and you are now rooted
Rooting FOTA ROM 4.4.2-
1.Download this scatter and cwm package
2.Extract it and use the scatter file with sptools to flash recovery
3.Now boot into recovery and flash subinst-signed.zip
4.Reboot and enjoy
MODS-
Increase app stoarage-
You don't like app storage only 0.9gb? , just follow the steps below-
1.You must be rooted before doing this
2.Download the mprio partition app here
3.Install the app and open it, read the warning and press agree
4.Choose desired partition and then wipe /data in recovery
Youtube Lag Fix-
If you play a video on latest youtube app, it will lag or maybe freeze on any mt6582 device with android 4.2.2 and 4.4.2 You need to install an older version of the youtube app from here
post #44
Sock Bootanimation for any ROM-
You don't like wierd or different boot animations on custom ROMS? Don't worry, Just reboot into recovery and flash BOOT_ANIOMATION.ZIP and reboot, credits to me for making zip and sharing with you all
NVRAM warning fix for any MTK device-
Check my post #199 for a very simple 30sec method to fix NVRAM warning
RECOVERY-
CWM Recovery for JB-
1.You must be rooted before this, see above how to root 4.2.2
2.Download recovery.img from here and place it in your sd card, not in any folder !!
3.Install mobileuncle tools from play store
4.Open mobile uncle tools and select recovery update, now select RECOVERY UPDATE
5.Select Recovery.img which you placed in /sdcard
6.You can now switch off the phone then press (vol up+vol dwn+power)
STOCK Recovery for JB-
Download here, thanks to amit_aks_007 for sharing
Flashing instructions are same as CWM(above)
CTR Recovery for KK-
1.Download and replace default recovery.img is sp flashable files with this one
2.Open sptools and select your kitkat scatter file
3.Now untick everything except recovery and click download
4.Done, press vol dwn + vol up + pwr when switched off
ROMS-
STOCK KITKAT-
This is official stock 4.4.2 flashable with sptools, just extract the rar, open sptools, click scatter-loading and select the KK scatter file in the folder you just extracted, press firmware upgrade, take out battery and connect phone, you must have all the necessary drivers before that, DOWNLOAD
STOCK KITKAT FOTA CWM-
Many of you might be having problem downloading fota on jb, i made it easier by making a cwm flashable zip of fota update, ROM THREAD
CleanKAT ROM by me-
It's the first and the best stock based kitkat ROM by me, I reccomend using this, follow the ROM THREAD for all links and downloads, flashing instructions and updates
DarkL ROM by me-
It's a themed rom by me, actually a cool hybrid look of android L and dark theme, visit ROM THREAD for downloads and screenshots etc. This ROM is based on stock kitkat so, it's bugfree too
VIBE UI V1.5 Kitkat ported by me-
This is latest vibe ui, it looks great, google "vibe ui 1.5" for screenshots, visit the rom thread for download link and more, ROM THREAD
KAT120 ROM by me-
It's the first RIO based kitkat custom ROM for C2C by me, follow the ROM THREAD for flashing instructions and downloads/updates
EPIC120 ROM by me-
I reccomend using this ROM for JB users, even after trying other ROMs, I always come back to EPIC, it will give you 500+ free ram and 650+ free ram on boot also, heating is reduced, read everything about it before deciding, Head to my ROM THREAD here for all info about this ROM
XOLO Q1010i ported by me-
This is XOLO Q1010i stock 4.2.2 ROM ported by me, check ROM THREAD for all info about how to flash and screenshots and do hit thanks if you like it :good:
Wiko Rainbow CWM flashable-
This is the latest version of wiko rainbow stock ROM (23 jun) flashable via CWM recovery for our canvas 2 colours, this is also made by me, go to the ROM THREAD here for flashing instructions
Myphone Rio ROM-
Micromax A120 is a rebranded myphone RIO and Myphone RIO ROM is much better than stock JB ROM
Instructions-
1.You must have CWM recovery installed before trying this
2.Make a full backup from CWM in case anything goes wrong
3.Download RIO ROM MyPhone_Agua_Rio_S5501_v1.17_Deodexed
4.Reboot into recovery
5.Wipe data/factory reset
6.Go to advanced and wipe dalvik cache
7.Go to mouns and storage and format /system
8.Go back and select install zip from sdcard, select MyPhone_Agua_Rio_S5501_v1.17_Deodexed.zip and confirm
9.Reboot after flashing is complete
10.Enjoy AOSP like experience
Stock JB 4.2.2 SP flashable-
This is official stock 4.2.2 flashable with sptools, if you want to flash my cleankat rom, this is the correct base, just extract the rar, open sptools, click scatter-loading and select the KK scatter file in the folder you just extracted, press firmware upgrade, take out battery and connect phone, you must have all the necessary drivers before that, DOWNLOAD
STOCK A120 ROM 4.2.2-
Instructions-
1.You must have CWM recovery installed before trying this
2.Make a full backup from CWM in case anything goes wrong
3.Download STOCK ROM
4.Reboot into recovery
5.Wipe data/factory reset
6.Go to advanced and wipe dalvik cache
7.Go to mouns and storage and format /system
8.Go back and select install zip from sdcard, select "copy of stock rom.zip" and confirm
9.Reboot after flashing is complete
10.CREDITS- Akash Ujjainkar for sharing
11.Enjoy
inverted commas are to be put ?
"pm.sleep_mode=1"
pankycool123 said:
inverted commas are to be put ?
"pm.sleep_mode=1"
Click to expand...
Click to collapse
No
Make a forum for this smartphone guys eagerly waiting since got this device in May.
Sachin97 said:
Make a forum for this smartphone guys eagerly waiting since got this device in May.
Click to expand...
Click to collapse
Thread updated with Recovery and ROM
Please include a guide to return to stock.
In order to claim warranty, one needs to return to stock ROM / recovery.
This is my first non-samsung device, so I am not familiar with how to do this for this device.
Please include a guide on how to get the phone back to 'everything-stock' in case phone has to be returned for repair during warranty period.
Thank You !
roycejp said:
In order to claim warranty, one needs to return to stock ROM / recovery.
This is my first non-samsung device, so I am not familiar with how to do this for this device.
Please include a guide on how to get the phone back to 'everything-stock' in case phone has to be returned for repair during warranty period.
Thank You !
Click to expand...
Click to collapse
You can always restore your CWM backup to return back to your previous setup and if you want to unroot, open framaroot app and select unroot, and i will post the stock recovery later
umangleekha said:
Thread updated with Recovery and ROM
Click to expand...
Click to collapse
Is there any problem with MyPhone Rio ROM?
I am planning to flash the ROM
How to Set / Unset Contacts as favourites ?
Hi,
I recently bought the A120.
I am unable to find a way to mark (or unmark) contacts as favourites ?
My GO contact widget identifies my favourite contacts (set from my earlier phone), but there is no marking or selection for favourite contacts in the contacts list ?
So is there a way to set a contact as 'favourite' ?
roycejp said:
Hi,
I recently bought the A120.
I am unable to find a way to mark (or unmark) contacts as favourites ?
My GO contact widget identifies my favourite contacts (set from my earlier phone), but there is no marking or selection for favourite contacts in the contacts list ?
So is there a way to set a contact as 'favourite' ?
Click to expand...
Click to collapse
Open the Contact app.
Slide to left.
U will find Favourite option.
I'm learning so press thanks to encourage me if I really helped you.
Sorry,
But there is no option marked 'Favourites'.
Even in your screenshot it is not seen.
What you have shown is 'groups'.
Thanks.
iamROX said:
Is there any problem with MyPhone Rio ROM?
I am planning to flash the ROM
Click to expand...
Click to collapse
It's perfect, camera settings are bit wrong, just change them after flashing, zero shutter delay is enabled which makes camera laggy, just disable that
umangleekha said:
It's perfect, camera settings are bit wrong, just change them after flashing, zero shutter delay is enabled which makes camera laggy, just disable that
Click to expand...
Click to collapse
So the RAM Management & Heating Issue is solved?
iamROX said:
So the RAM Management & Heating Issue is solved?
Click to expand...
Click to collapse
Android keeps about 220mb ram free always after you kill everything from recents and the heating is less but phone does get warm
roycejp said:
Hi,
I recently bought the A120.
I am unable to find a way to mark (or unmark) contacts as favourites ?
My GO contact widget identifies my favourite contacts (set from my earlier phone), but there is no marking or selection for favourite contacts in the contacts list ?
So is there a way to set a contact as 'favourite' ?
Click to expand...
Click to collapse
So I guess there is no way to do this in this device?
Is a very common function and very useful.
All the phones I've used so far have this feature .
Surprised that this one doesn't (or is well hidden).
Is there a 3rd party app for contacts that provides this feature?
Does the custom ROM mentioned have this?
Thank you!
New Rom
Color OS Rom for Micromax A120 Canvas 2 Colours :- http://thebroodle.com/micromax/color-os-rom-for-mmx-a120/
--------------------------------------------------------
Hit Thanks, if i helped you
Can we swap phone storage with internal or external SD card?
Phone storage is just 0.99 Gb.
This gets filled up pretty fast as you install apps. Even though app data is installed in external sd card, it seems the app itself occupies some space in phone storage.
Can we swap phone storage with the internal sdcard (1.6 Gb) or extremal sd card (up to 32 Gb) ?
This will allow the installation of even more apps?
I believe apps like 'Root internal 2 external' could do this but I would like some some advise from the experienced users in this thread?
Thanks!
roycejp said:
Can we swap phone storage with internal or external SD card?
Phone storage is just 0.99 Gb.
This gets filled up pretty fast as you install apps. Even though app data is installed in external sd card, it seems the app itself occupies some space in phone storage.
Can we swap phone storage with the internal sdcard (1.6 Gb) or extremal sd card (up to 32 Gb) ?
This will allow the installation of even more apps?
I believe apps like 'Root internal 2 external' could do this but I would like some some advise from the experienced users in this thread?
Thanks!
Click to expand...
Click to collapse
I use link2sd and I can move any app to sdcard
umangleekha said:
I use link2sd and I can move any app to sdcard
Click to expand...
Click to collapse
Yes, I too have installed large games like Modern Combat 4, Injustice, Amazing Spiderman etc without issues,
Although huge chunk of the app gets installed in the external SD card, each app still takes a peice of the 0.99 GB phone storage.
Soon this fills and there is a 'storage' warning error, though there are GBs free in the internal & external SD card.
This is what I'm refering too.
And now your reply has confused me.
You can select 'Default write disk' as external SD card... so what is the need for Link2SD app ?
I installed all the above games without any such app ?
Thanks
Edit : I see that after rooting you can move more apps to SD card that we could not earlier.
roycejp said:
Yes, I too have installed large games like Modern Combat 4, Injustice, Amazing Spiderman etc without issues,
Although huge chunk of the app gets installed in the external SD card, each app still takes a peice of the 0.99 GB phone storage.
Soon this fills and there is a 'storage' warning error, though there are GBs free in the internal & external SD card.
This is what I'm refering too.
And now your reply has confused me.
You can select 'Default write disk' as external SD card... so what is the need for Link2SD app ?
I installed all the above games without any such app ?
Thanks
Edit : I see that after rooting you can move more apps to SD card that we could not earlier.
Click to expand...
Click to collapse
This is what i was telling you, you can force any app to sd after root
To increase Internal App storage of canvas 2 colors A120(4gb/8gb version with stock kitkat_Custom Build version.........MMX_IN_06) just follow this steps :
Step 1: Download These Files:
A)INTERNAL APP STORAGE INCREASING FILE
B)SP FLASH TOOLS
C)ALL IN ONE MTK DRIVER
Step 2: Extract all the files
Step 3:install MTK driver
[PROCEDURE TO INSTALL MTK DRIVER:Remove the battery from your phone>connect it to pc via data cable>right click on my computer >click on manage>click on device manager>right click on your phone>update driver>browse my computer for driver software >select the driver's folder which you have extracted >ok>if u get any warning msg just allow the option>remove the data cable]
Step 4: Open SP Flash tools
Step 5: Add scatter file
Step 6:Select EBR1 and EBR2
Step 7: Click on Download
Step 8:Re connect your Canvas 2 colors via data cable (no need to insert battery)
Step 9:wait for the completion of Flashing Process
Step 10:Remove the data cable ,insert the battery and turn on your Phone
Step 11ull down Notification panel and tap on the msg "Damaged Internal SD card"
Step 12: Tap on Format ...
Now Enjoy 2.1 GB app storage with 410MB Mass storage in 4GB version and 2.1GB app storage with 4.08 GB Mass Storage in 8gb version. .... :good:
IF YOU WANT TO REVERT BACK YOUR PHONE TO ORIGINAL STATE, JUST FLASH THE STOCK EBR..CLICK HERE TO DOWNLOAD ORIGINAL EBR FILES ...
Warning :
Plz Do The Above Steps At Your Own Risk.......
It works only with Stock Kitkat.....Plz don't apply the above steps with "FOTA KITKAT UPDATE"(Custom Build V10)" or any other versions of Android
(I am not responsible for any damage you do to your device !!!! or void your warranty)
My works:
CLOCK WORK MODE RECOVERY FOR MMX C2C
Plz Hit thanks button if I helped you! :good:
does this work for clean kat rom?
does this work for clean kat rom?
Clean kat is based on stock a120 kitkat so just give it a try at ur own risk but there are more chances that I will work
Yes.....It will work with 8gb also but try it at your own risk .....
Confirmed it works with Micromax A120 (1 GB RAM, 8GB ROM) running kitkat. Thanks.
[REQ]
can u please make another version with app storage of 2.5gb and internal sd of 5-10mb ....... ????
no option for phone in device manager
I don't see any option for phone in device manager to copy MTK driver.
I made sure that phone was switched off with battery pulled and connected to PC through data cable. Please let me know on what do I need to do?
Works Great. Thanks!
This worked perfectly and serves the need for now. Had to flash stock kitkat though before doing this as i was on fota kitkat. Thanks a lot!
---------- Post added at 11:34 AM ---------- Previous post was at 11:12 AM ----------
ravirich said:
I don't see any option for phone in device manager to copy MTK driver.
I made sure that phone was switched off with battery pulled and connected to PC through data cable. Please let me know on what do I need to do?
Click to expand...
Click to collapse
You need to install all the necessary drivers in your computer to help detect your phone in SP flash tools.
Could you please provide the rooting procedure and EBR files for FOTA kitkat update?
I'm not able to root my 4GB Canvas 2 Colors using Framaroot because of the FOTA KitKat update. Also i need the EBR files for the repatition of my storage.
Please help.
Does Rooting require for this?
I would like to know if the phone needs to be rooted for this.
I would like to go with this based on you friends confirmation.
If rooting is required, then can I un-root after increasing the app storage space so that the phone gets secured exactly same as earlier?
Thanks all.
ganeshg1982 said:
I would like to know if the phone needs to be rooted for this.
I would like to go with this based on you friends confirmation.
If rooting is required, then can I un-root after increasing the app storage space so that the phone gets secured exactly same as earlier?
Thanks all.
Click to expand...
Click to collapse
I don't think it needs a rooted phone. You can go ahead with it.
pritzzy said:
I don't think it needs a rooted phone. You can go ahead with it.
Click to expand...
Click to collapse
May be a silly question. I just wonder if flashing EBR files is possible without Root.
Thanks.
ganeshg1982 said:
May be a silly question. I just wonder if flashing EBR files is possible without Root.
Thanks.
Click to expand...
Click to collapse
Yes because you will be doing it via sp flash tools and there is no rooting involved there
As there is no rooting involved here, the phone is secured same as earlier aka stock irrespective the size of storages are changed, Am i correct in that understanding. I am worried of alterations, but as the space is very low I need to do this for the good use of phone. I am a normal user of phone, not in development. So I would be so happy to get hep from you all and understand if there is any side effects of loosing the peace of mind, Will the phone be secured as earlier before it was done?
ganeshg1982 said:
As there is no rooting involved here, the phone is secured same as earlier aka stock irrespective the size of storages are changed, Am i correct in that understanding. I am worried of alterations, but as the space is very low I need to do this for the good use of phone. I am a normal user of phone, not in development. So I would be so happy to get hep from you all and understand if there is any side effects of loosing the peace of mind, Will the phone be secured as earlier before it was done?
Click to expand...
Click to collapse
Yes. It won't do anything with the stock operating system.
---------- Post added at 10:07 AM ---------- Previous post was at 10:04 AM ----------
pritzzy said:
Yes. It won't do anything with the stock operating system.
Click to expand...
Click to collapse
As mentioned in the description, you should be on stock KitKat and not fota kitkat
pritzzy said:
As mentioned in the description, you should be on stock KitKat and not fota kitkat
Click to expand...
Click to collapse
Stock KitKat means the one which was there in the phone upon purchase. Correct. I attached the screenshot for your reference. I did not update the os so far. Pls let me know if the version i have will support this storage size modification.http://forum.xda-developers.com/attachment.php?attachmentid=2955799&stc=1&d=1412100372
Yep. This is the one.
How to do this with "FOTA UPDATED KITKAT"??????????????
Is this Possible with FOTA updated kitkat or if any other way to please tell me.:crying::crying::crying:
sampadananda said:
Is this Possible with FOTA updated kitkat or if any other way to please tell me.:crying::crying::crying:
Click to expand...
Click to collapse
I don't think so. Try flashing stock KitKat rom before going for this method
Successfully flashed EBR1 and 2
Thank you for the support. I was able to successfully do it. I have got my app storage size increased. Thanks a lot. For models with 8GB Internal , it is good if we can increate to 3or 4GB if thats possible. Please let us know.
This file is exclusively prepared by BN_P
for
Asus Zenfone Max M2 (X01AD). It is EvolutionX Pie 2.3 on pie vendor, Firmware-JP-16.2018.1910.52.
How to ::
1. Confirm your device model as above.
2. No need to be worried on which build your device is presently. This Rom can be flashed on any build. Also separate unlock bootloader not required... It will b done by flash process automatically.
3. Only for windows users, flashing can be done in windows only.
Before start flashing,
Unzip the downloaded file. Put it in a folder in desktop.
There are files named "system.zip, vendor.zip, recovery.zip and boot.zip" , unzip those all, refer readme guide for details.
Put those above unzipped .img files in the main folder i.e same location of flash_all.cmd.
4. Put your device in fast boot mode, connect to PC and run the flash_without_data_erase.cmd or flash_all_erase_data.cmd, just double click on it.
5. Follow the pop up screen.
6. Data erase will be required after flashing before boot if your device is encrypted before flash or you were using any rom other than evoX.
Detailed process available in readme file inside.
Best of luck....Hit a thanks button if you like my works...
This ROM is included
TWRP+Magisk
opengapps pico
Gcam 7.2 (parrot)
Ampere app
Google Phone Dialer
Safetynet basic integrity Fixed but cts profile not fixed yet.
Bugs::
You tell me.
This ROM is a ported version and unofficial, converted into fast boot ROM for easy installation only.
Thanks to developers of
Magisk, Gapps, TWRP for this device and all those who have supported directly or indirectly.
Download Link ::
https://www.androidfilehost.com/?fid=4349826312261722798
https://drive.google.com/file/d/1222F_fuYa85Fa0_Nxcv-FL0lRLERdR3G/view?usp=drivesdk
reserved 1
reserved2
[email protected] said:
This file is exclusively prepared by BN_P
for
Asus Zenfone Max M2 (X01AD). It is EvolutionX Pie 2.3 on pie vendor, Firmware-JP-16.2018.1910.52.
How to ::
1. Confirm your device model as above.
2. No need to be worried on which build your device is presently. This Rom can be flashed on any build. Also separate unlock bootloader not required... It will b done by flash process automatically.
3. Only for windows users, flashing can be done in windows only.
Before start flashing,
Unzip the downloaded file. Put it in a folder in desktop.
There are files named "system.zip, vendor.zip, recovery.zip and boot.zip" , unzip those all, refer readme guide for details.
Put those above unzipped .img files in the main folder i.e same location of flash_all.cmd.
4. Put your device in fast boot mode, connect to PC and run the flash_without_data_erase.cmd or flash_all_erase_data.cmd, just double click on it.
5. Follow the pop up screen.
6. Data erase will be required after flashing before boot if your device is encrypted before flash or you were using any rom other than evoX.
Detailed process available in readme file inside.
Best of luck....Hit a thanks button if you like my works...
This ROM is included
TWRP+Magisk
opengapps pico
Gcam 7.2 (parrot)
Ampere app
Google Phone Dialer
Safetynet basic integrity Fixed but cts profile not fixed yet.
Bugs::
You tell me.
This ROM is a ported version and unofficial, converted into fast boot ROM for easy installation only.
Thanks to developers of
Magisk, Gapps, TWRP for this device and all those who have supported directly or indirectly.
Download Link ::
https://www.androidfilehost.com/?fid=4349826312261722798
https://www.androidfilehost.com/?fid=4349826312261722798
Click to expand...
Click to collapse
Can you please check and update the download links.
heaven992 said:
Can you please check and update the download links.
Click to expand...
Click to collapse
Only g drive is working of now
How is the rom anyone checked it?..
I am new here and finding daily driver rom
Meer Hossain said:
How is the rom anyone checked it?..
I am new here and finding daily driver rom
Click to expand...
Click to collapse
This one is best as per my experience. Till now this one is in use in mine one.
[email protected] said:
This one is best as per my experience. Till now this one is in use in mine one.
Click to expand...
Click to collapse
Pls provide command file for linux....
Please tell me which rom is best for gaming
Which Gcam 7 is working on max m2
Can you please give me the apk
By the way Does it work stock android pie
[email protected] said:
Only g drive is working of now
Click to expand...
Click to collapse
You have the latest version of Evo X?
how to go back to original rom?
Which os is better Havoc os or Evo X os
Asus max 2 evolution x updated do android Q
There's one issue after installing rom,
The receiver and me are unable to hear our voices.
I can't hear the connecting tune/caller tune too.
Plz help me out
Hey bro as I've used all GSI and you fastboot bundles I can say that this Evo X 2.3 is best in terms battery life as well as customisation. I request you to please update the vendor to latest WW......71 so more battery improvement can be done.
Plzz fixed sefety net