Database Users

Tutorial: How to Restore Your Galaxy Tab 10.1 back to stock using ODIN

Hey guys
I made this video a while ago on how to restore your Galaxy Tab 10.1 back to stock using ODIN. Hopefully it helps some people out.
http://www.youtube.com/watch?v=gJ6VZGCdRSo

Thanks!

eddychecker said:
Thanks!
Click to expand...
Click to collapse
np

Here's a quick step as well from my memory only, I just did this 2 days ago.
0. Ensure the tablet is at least 50% charged and is turned off.
1. Download Samsung USB driver and install on your PC.
2. Download Odin and extract to a folder.
3. Download the correct stock firmware from sammobile.com/firmware OR from samsung-updates.com. I would prefer the latest one. I got the Dec 20 2012 New Zealand for P7510. Extract the MD5 file on the folder where you placed Odin.
4. Run Odin as Administrator, tick on PDA, and choose the firmware file (extension is MD5). Leave the other options as is. Odin will take a minute or so to process the firmware.
5. While tablet still off, plug the USB cable on the samsung connector on the tablet. Don't insert in the PC yet.
6. Turn on the tablet by holding POWER and the VOLUME DOWN button to enter the recovery. Using the VOLUME DOWN button, move the highlight to the "Download Mode" (the right option), and press VOLUME UP button to choose it, and Continue after the warning.
7. Now connect the other end of the USB cable on the PC where Odin is waiting.
8. Click START in Odin and wait for it to finish. The tablet will reboot when done.
9. If for some reason it hangs on SAMSUNG startup, repeat step 6 above but choose the left option (instead of download mode), and do a factory reset, and reboot the tablet after.
10. Done. Pure stock.

Ok,l was able to restore my stock rom,but after that my internal storage became 2gb instead of 16gb,help!
Sent from my A90 using xda premium

Perhaps you need to tick repartition in Odin? Just a guess though.
Sent from P7510 Tapatalk2

great post :good:

Yeah, great info. Thanks:good:

No Root
jtdc said:
Here's a quick step as well from my memory only, I just did this 2 days ago.
0. Ensure the tablet is at least 50% charged and is turned off.
1. Download Samsung USB driver and install on your PC.
2. Download Odin and extract to a folder.
3. Download the correct stock firmware from sammobile.com/firmware OR from samsung-updates.com. I would prefer the latest one. I got the Dec 20 2012 New Zealand for P7510. Extract the MD5 file on the folder where you placed Odin.
4. Run Odin as Administrator, tick on PDA, and choose the firmware file (extension is MD5). Leave the other options as is. Odin will take a minute or so to process the firmware.
5. While tablet still off, plug the USB cable on the samsung connector on the tablet. Don't insert in the PC yet.
6. Turn on the tablet by holding POWER and the VOLUME DOWN button to enter the recovery. Using the VOLUME DOWN button, move the highlight to the "Download Mode" (the right option), and press VOLUME UP button to choose it, and Continue after the warning.
7. Now connect the other end of the USB cable on the PC where Odin is waiting.
8. Click START in Odin and wait for it to finish. The tablet will reboot when done.
9. If for some reason it hangs on SAMSUNG startup, repeat step 6 above but choose the left option (instead of download mode), and do a factory reset, and reboot the tablet after.
10. Done. Pure stock.
Click to expand...
Click to collapse
I have a slight problem and I hope this is the right forum page...
I flashed my tablet with Cyanogenmod 10.1 but have lost my ability to root my phone!!
To say the least it is a but frustrating. (Samsung Tab 2 10.1)
Thanks in advance

h8m8ker said:
I have a slight problem and I hope this is the right forum page...
I flashed my tablet with Cyanogenmod 10.1 but have lost my ability to root my phone!!
To say the least it is a but frustrating. (Samsung Tab 2 10.1)
Thanks in advance
Click to expand...
Click to collapse
You know there is a GT2 forum and not everything here is compatible between this original 10.1 and yours.
Sent from my Galaxy Nexus using xda premium

Will this wipe all my photos and personal stuff??
Sent From My Galaxy S3 Boricua 100%

Just bought a used 10.1 and this worked great for me. Previous owner really messed up the firmware before! The home button didnt even work! Thanks OP

thank you

Can I flash the room directly from recovery with full wipe?
Sent from my GT-P7310 using xda premium
---------- Post added at 02:46 PM ---------- Previous post was at 02:08 PM ----------
Ok is an md5. Done by odin thanks
Sent from my GT-P7310 using xda premium

eMMC Bug
Hi Dear Madmajd,
I own the Gtab 10.1 (P7510) is with the eMMC bug, if I perform this procedure can resolve?
Thank you.

Thanks! :victory:

hi, how would i know if the unit came from korea? so i would not make mistake in flashing a rom?
it says model number gt-p7500
4.0.4
i9103xxLQ3
[email protected] #1 SMP PREEMPT mon AUG 20 18:41 KST2012
IMM76D.DXLP9

Thx for the info!

No luck restoring/resetting Tab
So I followed all instructions, found the right firmware, got Odin, everything seemed to go well, my tablet indicated that it was downloading the firmware, Odin finished and announced success... but my Tablet screen is black again, it doesn't reboot. Trying to reboot just gets me back to where I was before: Eternally stuck on the Samsung logo, unable to even turn it off for more than a few seconds because it simply turns itself back on and goes to the logo screen.
Trying to do a hard reset leads to the same black screen as the end result of Odin. Plugging in the tablet leads to a battery screen that looks frozen (though it does charge).
Anyone have any idea what's wrong with it?

Thank you for the information

[HOW TO] Restore your tablet to stock + Reroot + Flash New Recovery

Before doing anything, make a backup to your external MicroSD card before continuing. Even if this method is very safe, and has been done several times without problems, we can't predict anything that may happen during the process.
RESTORE YOUR TABLET TO STOCK, APPLY ROOT, THEN FLASH A NEW RECOVERY.
This tutorial applies to both P3110 and P3113. They are the exact same models.​
REQUIRED:
Odin ( Take any version you wish. The latest ones should do the trick )
The stock Firmware file. Concerning this part, Google is your friend.
The official Samsung USB Cable that came with your tablet. It is recommended (but optional) to connect your tablet into your computer's built-in USB ports.
The latest Odin-flashable recovery. ( P3113 uses P3110 files )
CF-Auto-Root
Patience
Returning your device to a like-new state.:
1. Boot into Recovery Mode. This can be achieved by holding Volume Up + Power when your device is powered off.
2. Wipe all data. [ Factory Reset ( /data /cache ), System ( /system ) and Internal Data ( /media/storage )
3. Reboot into Download Mode. Usually found on the Advanced Options of most CWM-based recoveries.
It happens that your Tablet cannot boot into Download Mode due to various reasons. There is a battery trick that can be achieved. Do it when you absolutely cannot boot into Download Mode.
1. Remove your tablet's battery.
2. Connect your tablet to your computer
3. Your device should automatically boot into Download Mode.
4. Put back your Battery back into your device.
Click to expand...
Click to collapse
4. Connect your Tab to your Computer
5. Run Odin as Administrator + Windows XP SP3 Compatibility Mode ( Right-Click > Run as Administrator // Right-Click > Properities > Compatibility > Windows XP Service Pack 3 )
6. Click the "PDA" button, and select the previously-downloaded firmware file.
7. Press Start ( Do not check repartition. It will totally screw up your device. )
8. The installation process will overwrite all data on your device and install the stock firmware.
9. You are done.
Click to expand...
Click to collapse
Rerooting your device.
1. Reboot your device into Download Mode. From there, you are not obligated to connect your device to your computer.
2. Open Odin as Administrator + Windows XP SP3 Compatibility
3. Connect your Device to the computer.
4. Click on PDA and select the CF-Auto-Root package you previously downloaded
5. Click Start, with Auto Reboot Checked! Again, do not check "Repartition" as it may screw up your device.
6. Wait until it's done.
Click to expand...
Click to collapse
Installing CWM Advanced Recovery!
1. Reboot your device in Download Mode.
2. Open Odin as Administrator + Windows XP SP3 Compatibility
3. Connect your Device to the computer.
4. Click on PDA and browse the Odin-packed CWM package you downloaded.
5. Click Start, with Auto Reboot Checked! Again, do not check "Repartition" as it may screw up your device.
6. Wait until it's done.
Click to expand...
Click to collapse
Press the thanks button if this tutorial helped you.
If you have any problems, feel free to post in the thread. tho I won't probably help you.

Nice guide, but don't we have enough?
Sent from my GT-P3113 using Tapatalk HD

Luigi2012SM64DS said:
Nice guide, but don't we have enough?
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
Yup.... I think there are enough guide avout this....
Sent from my GT-I9300 using xda premium

OK, but first I must install Triangle Away to reset the counter and next I use Odin and recover original rom.

-_-
as007 said:
OK, but first I must install Triangle Away to reset the counter and next I use Odin and recover original rom.
Click to expand...
Click to collapse
Bro... You have to understand properly... Lame Juniors..
I AM NOT JUNIOR.. I JUST HAVE JOINED XDA FORUMS LATE!!:good:

In op page it is mention about battery remove /in , but my GT p3100 does not have such option, battery is permanently fixed .
Sent from my GT-P3100 using xda premium

Well when i use Customrom CM 10.1 i decide to back on Stockrom, i format my system and clear all my data so my tab was totaly clean even my customrom was gone so i flash it to stockrom. and yes my tab was totaly FRESH! :good:

idhbar said:
In op page it is mention about battery remove /in , but my GT p3100 does not have such option, battery is permanently fixed .
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance

WaryLouka said:
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
Click to expand...
Click to collapse
Hi, I have PA installed with TWRP installed. I downloaded my firmware from http://samsung-updates.com/. Do I need to flash the stock kernel as well? and stock recovery? Sorry for the noob question.

Maybe I'm just missing it, but I've gone to a couple of firmware sites and I can't find US firmware. Is there anywhere I can get that?

Does anyone have a link that's not to one of these stupid-ass, lame, @#$%ing pay download sites?
3 hours for firmware? WTF?

jdCaptivate said:
Does anyone have a link that's not to one of these stupid-ass, lame, @#$%ing pay download sites?
3 hours for firmware? WTF?
Click to expand...
Click to collapse
Latest P3113UECMH2 (4.2.2) : http://hotfile.com/dl/241707705/3ce5c6f/XAR-P3113UECMH2-20130826170038.zip.html
Or : http://uploaded.net/file/oadonsrj

Bibicp said:
Latest P3113UECMH2 (4.2.2)
Click to expand...
Click to collapse
TYVM!

jdCaptivate said:
TYVM!
Click to expand...
Click to collapse
Don't say thanks: press it.

Thanks I'm on 4.2.2 now

Dead Tab2?
WaryLouka said:
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
Click to expand...
Click to collapse
I have a similar situation. A previous rooting operation on my Tab2 7 P3113TS was either bad or partial and it appears it will not go into the download mode. power-pgup, power-pgdn, or just power all go to the Samsung splash screen then to a blue VeinDroid rom screen but no further. I tried 3 different version of ODIN and all recognize the device (port goes yellow) but cannot communicate. It stops at the SetupConnection step. Is this thing toast or is there something I'm missing?

WaryLouka said:
If a message is shown, press Volume Up. If you can't enter downloadmode normally, try doing "adb reboot download" in ADB. If you still can't, connect your phone to your computer, REMOVE THE BATTERY, hold Volume Up/Down + Power until DownloadMode is entered and put the battery in again. If your phone doesn't boot or/and battery trick doesn't work, use an USB Jig. If theres no usb jig, while until the battery icon is shown ( charging ) then do "adb reboot download" in ADB.
Click to expand...
Click to collapse
Are you serious????
REMOVE THE BATTERY????
I think it's not recommended to do anything like this only because of flashing a Fw, isn't it?^^

help plz
Hi I lost my /efs files for my samsung galaxy tab 2 p3113 how do I fix this proble If some one can help me I would be very graitfull

Great!thanls for The tutorial
Sent from my Ativ S using Tapatalk

antkiller said:
Hi I lost my /efs files for my samsung galaxy tab 2 p3113 how do I fix this proble If some one can help me I would be very graitfull
Click to expand...
Click to collapse
do you have a backup?

How to update your Galaxy Grand to 4.2.2 (official) using a computer

I'm not responsible for anything you do with your phone/tablet/rice cooker and make it into an iPhone!
Installation Package & Pre-requisites:
1. Samsung Galaxy Grand (obviously), charged above 80%
2. Odin ( Download Here http://ohguideme.com/wp-content/uploads/2013/07/Odin3-v3.07.zip)
3. The official 4.2.2 firmware for GT-I9082 (Download here)
4. You should have Kies or drivers of your grand installed. Download here (Kies)
5. Enable USB Debugging by going to ettings :>About device >Developer options >USB debugging
Installation:
1. Connect your Grand to your computer via USB Cable.
2. Extract & Start ODIN on your computer, make sure that Auto Reboot & F.Reset is Checked while Re-partition is Unchecked.
3. Restart Galaxy Grand in “Download Mode”. You can do it by switching off the device and then holding Volume Down+Power+Home button simultaneously for few seconds.
4. ODIN should recognize your device [ID:COM will turn blue or yellow], if it does not either your antivirus or firewall settings is creating problem or Samsung USB driver (Kies) is not correctly installed.
5. Check & Hit PDA on ODIN and select the file 'I9082XXUBMI1_I9082ODDBMI1_I9082DDUBMI1_HOME.tar.md5 you downloaded on your computer. (extract and select).
6. Press Start
After this,
Your Samsung Galaxy Grand will reboot on its own, and you will have official Android 4.2.2 Jellybean Installed on your device.
Note: If their is any problem during installation, like boot loop or force closures, installing the 4.2.2 version or during the install you need to wipe/factory data reset your Galaxy Grand. You can do this by pressing Home+ Power + Volume Up key. There will be an option to wipe/factory data reset select it and your will be good to go.
Hit 'Thanks' if you found this helpful.

Inu version?
Sent from my GT-I9082 using xda premium

escape_artist said:
Inu version?
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
yup!

Then would I lose my root access?again need to root? If so, will I be able to do it by previous zip update that I downloaded? What about the apps? Will they be gone? Meaning need to reinstall or data will be backed up to sd card? Pls be kind with these answers
Sent from my GT-I9082 using XDA Premium 4 mobile app

Anyone facing battery drain or low internet speeds and dropped calls issues?

[How to][guide] UPDATE TO 4.4.2 BOOTLOADER AND ROOT TMO/CANADIAN VARIANTS

The point of this thread is to help people safely update their bootloader so that they may flash a touchwiz kitkat rom.
I have seen several threads where people are running into issues and even development threads get cluttered with questions. So I will give you the steps needed using my method.
Please note this is for windows 7. However it should work on other versions of windows too.
This method may wipe your internal storage completely so transfer anything you do not wish to lose to you pc.
This method will also trip yout knox counter which may void your warranty.
You also may not be able to downgrade to 4.3 so make sure this is what you want to do
I am not responsible for bricked devices. Proceed at own risk
You have been warned!!!
So what you need to do is download a few files.
I have created a zip file and uploaded it for easy access and simplicity reasons. If it becomes out dated I will update accordingly.
What is needed is your variants stock firmware. You need to get the one for your device off sammobile.com
On sammobile you must create an account in order to download (if you don't have an account already).
Once you are logged in click on the firmware tab. Then enter your device name.
Canadian variants enter: SM-N900W8
TMO variants enter: SM-N900T
You will then be able to pick the most recent firmware for your device and download it. So now that you have the correct firmware (please double check, and if unsure google it)!!!
So lets begin
You also need to download the zip file I have made and extract it. Inside it you will find the samsung drivers, 3 recovery options to pick from, the supersu.zip and also odin.zip. once you've extracted the file you've just downloaded you need to extract the odin.zip inside it as well.
So if you have not previously installed the samsung drivers you will need to do so. Simply run the samsung mobile driver.exe file and install it. Once successful in installing, reboot your pc.
when it boots up, connect yout device to you pc and transfer over the supersu.zip over to your phone. The root of your sd card is recommended for easy access.
Now what you need to do is ensure usb debugging is enabled. Do so by going to settings, general, developer options and ensure its checked. If you do not have developer options simply go to about phone, and tap om build number 7 times to enable developer options.
Once this is done you need to power off your device with it unplugged. Now we need to enter download mode. You can do this by holding the home button, volume down and pushing and hokding the power button. You will be presented with a warning screen. You push volume up to proceed or vokume down to cancel and restart device.
We want to push volume up. It will then show a big android saying warning do not turn off target.
Now connect your device to your pc and run odin as administrator.
In odin near the top left you shoukd see a box colored in saying:
Com and have a number. If you see this that means odin recognizes your device. If you do not that means eiter you dont have the drivers installed properly or perhaps you need to try a different usb port or cord.
You then will see a few check boxes checked off. Auto reboot and f.reset time. leave these checked only.
Theres an AP BUTTON. Click this button and then navigate to your stock firmware file you've downloaded and select it. It may take a few minutes to load it. Once it does load all you need to do is click the start button and let odin do the rest. Do not touch anything.
This will take a few minutes. You should see a green "pass" in the box at the top left. Your device will eventually reboot and you will now be stock, unrooted on the latest firmware.
*please note that if at this point your device hangs on the Samsung logo sayong "recovery booting" you need to pull the battery and reflash the firmware. This time also check the repartition box.
Now we need to root and flash a custom recovery.
Again you'll need to enable usb debugging on your phone so I recommend skipping the google setup stuff on your phone.
Once you have enabled it, power off your phone with it unplugged and again enter download mode the same way you did before.
Plug in your device and in odin press the reset button to clear the stock firmware file.
Now connect your device to your pc and again ensure that odin recognizes it.
Click the AP BUTTON again and this time navigate to the custom recovery of choice ( I reccomend twrp. I am also using the tmo version as I could not get the canadian version to boot)
Once selected again hit the start button. In a few seconds you should again receive a "PASS" message. That mrans you have successfully flashed a custom recovery.
Now power off your device and unplug it. Now we need to enter recovery.
Do so by pressing the home button, volume up, and push and hold the power button. Once you see recovery booting you can let go. You will also see in red font: recovery is not seandroid enforcing. That just means you have a custom recovery.
If your device hangs at this screen you will need to oower it off and try a different recovery.
Once in recovery I reccomend making a nandroid backup. (Optional)
Next we are going to root. All that you need to do is press install or install zip from sd card depending on which recovery you chose and navigate to the supersu.zip
Now install the zip by following the instructions of the recovery and then reboot.
Congratulations you are now rooted (you can confirm if you like by downloading the root checker app if you wish) and on the latest firmware and can flash custom 4.4.2 roms for your device. Please read and follow the directions of the op in the thread of the rom you wish to flash.
Download link: http://d-h.st/4xl
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif

phone stuck on recoveryboot a
Theres an AP BUTTON. Click this button and then navigate to your stock firmware file you've downloaded and select it. It may take a few minutes to load it. Once it does load all you need to do is click the start button and let odin do the rest. Do not touch anything.
This will take a few minutes. You should see a green "pass" in the box at the top left. Your device will eventually reboot and you will now be stock, unrooted on the latest firmware.
= at this part of the instruction odin has said pass but my phone just has samsung logo and says on top recovery boot... and nothing else i dont know how to continue or move forward i hope someone can help me thank you and sorry for troubling you

nymomo789 said:
Theres an AP BUTTON. Click this button and then navigate to your stock firmware file you've downloaded and select it. It may take a few minutes to load it. Once it does load all you need to do is click the start button and let odin do the rest. Do not touch anything.
This will take a few minutes. You should see a green "pass" in the box at the top left. Your device will eventually reboot and you will now be stock, unrooted on the latest firmware.
= at this part of the instruction odin has said pass but my phone just has samsung logo and says on top recovery boot... and nothing else i dont know how to continue or move forward i hope someone can help me thank you and sorry for troubling you
Click to expand...
Click to collapse
I replied to your pm you sent me. Anyway just flash a different recovery if it's hanging after flashing recovery. If its hanging after flashing stock 4.4.2 firmware try it again by oulling battery and going back into dl lodem this time also check the repartition box
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif

Where are the download links?

Arturofm2 said:
Where are the download links?
Click to expand...
Click to collapse
Well if you're having to ask this then that leads me to believe you did not read the op. I suggest you do so or you may have a bad experience. Once you read all of the op I will tell you where it is
Sent from my GT-I9205 using Tapatalk

markbencze said:
Well if you're having to ask this then that leads me to believe you did not read the op. I suggest you do so or you may have a bad experience. Once you read all of the op I will tell you where it is
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Now I see the download link, but it wasn't there yet.
Thanks, by the way you said that it may be difficult to go back to a different version, does this include the backups too?

Arturofm2 said:
Now I see the download link, but it wasn't there yet.
Thanks, by the way you said that it may be difficult to go back to a different version, does this include the backups too?
Click to expand...
Click to collapse
Yes
Sent from my GT-I9205 using Tapatalk

My phone is not flashing
its working never mind lol. I just tried again and it worked

regarding the stuck on RECOVERY BOOTING, you have to reflash it, WITHOUT ticking the REPARTITION (as stated in the instructions. you just need to reflash again. and it should work the 2nd time around

Thanks very

How can i get it to work with mac
Sent from my SM-N900T using xda premium

westkhalifa13 said:
How can i get it to work with mac
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
No idea man. I don't have a mac. Google it man
running DECEPTICON rom (coming soon)
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif

{NEED HELP] my grand prime not responding to pc, only flickers blue colour on screen.

hi, i got a problem with my phone after flashing twrp.
here's how it happened:
1. i flash odin twrp for my grand prime duos and it showed success, after try rebooting into the twrp.. it shows dead android (means that twrp is not installed)
2. I rooted my phone using kingroot in order to gain root access to use twrp manager to install twrp using the apps. kingroot showed message to disable knox and i approved it.
3. i used the twrp manager to install for my device, busybox not installed in this moment. after I chose the correct model (prime duos), it went into downloading the twrp.. after downloaded the twrp, the app installed the twrp but i got message telling that another twrp version is already installed, it asked me to go into the recovery and i click yes.
4. the problem happened, please watch the video that i attached.
is there any solution? does anyone ever faced this problem?
- tried to connect to pc but it gives no respond to my pc
- cannot go into download mode
- tried to push power button + volume down, still nothing.
please help me, thanks in advanced.
watch the video : https://www.youtube.com/watch?v=vM_9warqENU

Can it be turned on? And get android booting?
In other words can you use it normally?

fabiossilva21 said:
Can it be turned on? And get android booting?
In other words can you use it normally?
Click to expand...
Click to collapse
Nope, it stays like the video i uploaded. Blue colour flickering at bottom of the screen and not respond to my pc. Is it fixable?

Didn't you on stock Lollipop ? KitKat?

adammasri said:
hi, i got a problem with my phone after flashing twrp.
here's how it happened:
1. i flash odin twrp for my grand prime duos and it showed success, after try rebooting into the twrp.. it shows dead android (means that twrp is not installed)
2. I rooted my phone using kingroot in order to gain root access to use twrp manager to install twrp using the apps. kingroot showed message to disable knox and i approved it.
3. i used the twrp manager to install for my device, busybox not installed in this moment. after I chose the correct model (prime duos), it went into downloading the twrp.. after downloaded the twrp, the app installed the twrp but i got message telling that another twrp version is already installed, it asked me to go into the recovery and i click yes.
4. the problem happened, please watch the video that i attached.
is there any solution? does anyone ever faced this problem?
- tried to connect to pc but it gives no respond to my pc
- cannot go into download mode
- tried to push power button + volume down, still nothing.
please help me, thanks in advanced.
watch the video : https://www.youtube.com/watch?v=vM_9warqENU
Click to expand...
Click to collapse
I would try reinstall of drivers using samsung kies then see if it will connect to pc. But if you can't even get into Odin mode on the phone I hate to say you now have a very expensive paper weight.
Sent from my SM-S920L using XDA-Developers mobile app

adammasri said:
Nope, it stays like the video i uploaded. Blue colour flickering at bottom of the screen and not respond to my pc. Is it fixable?
Click to expand...
Click to collapse
Well then, I can't help you at all :/ I would say and go try to claim your warranty but I HIGHLY doubt they will let that pass

lanhikari2000 said:
Didn't you on stock Lollipop ? KitKat?
Click to expand...
Click to collapse
i was on kitkat. :/

DanHutchins said:
I would try reinstall of drivers using samsung kies then see if it will connect to pc. But if you can't even get into Odin mode on the phone I hate to say you now have a very expensive paper weight.
Sent from my SM-S920L using XDA-Developers mobile app
Click to expand...
Click to collapse
its okay bro, thanks

adammasri said:
i was on kitkat. :/
Click to expand...
Click to collapse
TWRP 2.8.7.0 is only for stock Lollipop, you can install but it won't work on Kitkat. And if your PC is win 7 or higher, you just plug in and wait about 20 minutes, and your PC will auto download and install usb drivers.
I have tested on my PC.

DanHutchins said:
I would try reinstall of drivers using samsung kies then see if it will connect to pc. But if you can't even get into Odin mode on the phone I hate to say you now have a very expensive paper weight.
Sent from my SM-S920L using XDA-Developers mobile app
Click to expand...
Click to collapse
Vol down+home+power is download mode. Just vol down+power will do nothing
Sent from my SM-S920L using XDA-Developers mobile app

DanHutchins said:
Vol down+home+power is download mode. Just vol down+power will do nothing
Sent from my SM-S920L using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry i mean powe up+home+volume down

lanhikari2000 said:
TWRP 2.8.7.0 is only for stock Lollipop, you can install but it won't work on Kitkat. And if your PC is win 7 or higher, you just plug in and wait about 20 minutes, and your PC will auto download and install usb drivers.
I have tested on my PC.
Click to expand...
Click to collapse
Ok i will try thanks for the tip