Related
thanks a lot to amarullz for providing aroma installer, and thanks to nightshack0 I have taken his installer and modded to work according to my need but dont think that I have just copied and pasted the installer
had you ever feel that another galaxy s variant's forum have a ics rom which suits all your need but you cannot flash it because it is not yet ported to your device but now all this will not happen again with this patch you can install which ROM you want to flash there will be no boundation for you.
if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android
from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad++(windows)
Click to expand...
Click to collapse
this patch will let you flash other I9000 or t959 roms I have not tried it on other variant but you can try and let me know if it works, I have tried to flash a nexus s rom and it was not flashing so just flash and let me know there is no harm no soft brick no hard brick just physical button will not work until you flash this patch or another rom
Click to expand...
Click to collapse
how to use this patch:- first flash the rom you wanted then this patch and if rom is not flashing read the FAQ
Click to expand...
Click to collapse
download link
*AROMA compatible v1.2:- http://bit.ly/rompat12 (39mb)
* AROMA compatible v1.1:- http://bit.ly/JpHy83 (41mb)
* CAPRIVATE patch v1.0:- http://db.tt/35H5A9mH
Click to expand...
Click to collapse
PROS:- 1.flash which ics rom you want
2. new world with more rom have been revealed
3. rom chefs work have been reduced because now they do not need to port their rom.
4. small size just 12mb
5. TWRP kernel is pre bundled thanks to KRARVIND
Click to expand...
Click to collapse
CONS:- 1. you cannot get the build properties(build.prop) of the rom you are flashing instead you will get the build property which will not be related to any ics rom
Click to expand...
Click to collapse
the patch do not contains any file which can cause a bug and patch will only work on ics roms not gb
For further clarification read FAQ on second post
update:- keep the thanks coming guys and I will add the support of aroma installer and new things just keep me encouraged by pressing thanks
Click to expand...
Click to collapse
update 2:- hi all if you like my work please rate this thread with 5 stars and also submit it as news tip
Click to expand...
Click to collapse
update:- flashed fascinate rom by editing updater script and without resigning got it booted up but it cleared my efs folder so was not getting any network coverage, I got very depressed tried cleared data restore nandroid but nothing works then I thought about efs and with the backup I copy imei files to efs folder and after reboot I got coverage now I will not flash any fascinate rom just for testing but I can say that fascinate rom are working
Click to expand...
Click to collapse
PATCH FAQ
FAQ
Q.:- how to use this installer
Ans:- don't worry about this all the instruction have been given in the installer you just need to flash the package in recovery it is just like installation wizard of windows
Click to expand...
Click to collapse
Q.:- will this also work on gb rom
Ans:- no the patch contains a kernel which cannot work with gb rom
Click to expand...
Click to collapse
Q:- while flashing a galaxy s ics rom I got an error of assert failed what to do.
Ans:- first flash this patch then go to advance and select reboot recovery with new TWRP recovery flash the rom then again flash patch
Click to expand...
Click to collapse
Q.:- why you provided custom build.prop.
Ans:- if build.prop will not be provided then rom's build.prop will change you device's build properties which will not letyou flash files specially created for captivate
Click to expand...
Click to collapse
Q.:- can I flash another captivate ics kernel
Ans:- yes you can flash
Click to expand...
Click to collapse
Q.:- can I flash a kernel I9000 or T959
Ans:- no you cannot flash
Click to expand...
Click to collapse
Q.:- can you give some info about TWRP kernel
Ans:- a bigmem kernel with 720p recording patch originally can be found in Slim Ice rom thanks KRARVIND for this
Click to expand...
Click to collapse
Q.:- what can happen if I forgot to flash this patch
Ans:- nothing serious just the physical keys (menu, back etc.) will not work except this everything will be normal just boot to recovery and flash the patch and keys will work again
Click to expand...
Click to collapse
Q.:- I like your work where can I donate you
Ans:- my work is not that much to be donated and I got pocket money from my father I am just a teenager of seventeen just press thanks button and rate this thread with 5 stars, I will be happy
Click to expand...
Click to collapse
Q.:- Is there any modem provided Ans:- no, there is no modem in the package and will be provided in next update following in 3-5 days
Click to expand...
Click to collapse
WHAT'S NEW
v1.2
1. added bootanimation support
2. removed 30 data fix script
3. added vold.fstab
4. added shutdown charging animation files
5. only single modem is there to decrease size of the patch
6. added a new splash screen
v1.1
1. Added support of AROMA INSTALLER (thanks AMARULLZ)
2. Updated Semaphore kernel
3. Removed some unwanted files
4. Added some Init Scripts
5. Removed Lib files
6. Added Modem.bin
tested roms
a list of tested roms is here
1. infinitum (currently ported)
2. myics ultimate fusion
3. galaxy s cm9 kang build
4. team icssgs
Interesting. Will check it out
Sent from my SGH-I897 using xda premium
Interested to try this out... waiting for link. I'm feeling daring today.
edit: thread updated while I was posting- I'll report back when I try it out.
cool... So where is the link?
Sent from my SGH-I897 using XDA
guys I have just created the thread it will take time to complete link have been added
oooh whats this lol
sorta like Hellraiser from the infuse forum
Cool it's there yeah let's see )))))
Sent from my SGH-I897 using XDA
Really? Wow! that sounds awesome!! Gonna try it for sure.
Any feedback? Lol
Just to clarify
I flash this after ANY ICS rom on Any(galaxy s) Phone?(Such as Galaxy s II) Or Just for vibrant?
Also I flash the patch first then the rom Of My choice? Or what o.o
[email protected]$$ GONNA TRY THIS OUT NOW!
Sent from my SGH-I897 using xda premium
Can somebody explain how the hell I use this o.o Im confused
patrick8996 said:
Can somebody explain how the hell I use this o.o Im confused
Click to expand...
Click to collapse
Hi confused! I'm perplexed. Would like to this as well.
Sent from my SGH-I897 using xda premium
shaker2k said:
Hi confused! I'm perplexed. Would like to this as well.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Lol Guess Im gonna try it o.o
Gonna flash this patch and find advanced(wherever that may be) and then flash an SGSII Rom
patrick8996 said:
Lol Guess Im gonna try it o.o
Gonna flash this patch and find advanced(wherever that may be) and then flash an SGSII Rom
Click to expand...
Click to collapse
I think it's just i9000 and i9020 (google nexus). Not sure though.
swayjd said:
I think it's just i9000 and i9020 (google nexus). Not sure though.
Click to expand...
Click to collapse
damn it o.o
so i can flash a nexus one ics rom on my cappy? i dont get it
@OP, can you explain us what this does?
Hello,
First post on xda !
I readed lot of thread about sgy and have made many tests.
I got incredible battery autonomy improvement with the kuro kernel :good:
I will test others kernel to compare
Is there a way to backup the stock kernel and restore it with cwm
In order to test kernels quickly, i searched in many thread but have not found.
Thanks !
Same procedure with install custom kernel..
Extract boot.img from pdaXxx.tar (stock rom from doky thread)
Put in /sdcard/boot.img
Install with mai77 method use SGYbiCWM.zip with cwm-recovery from madteam/skin.
Read 1-10post in basic newbie guide from ronnieryan in sticky general section.
Welcome to xda and try with search and read important thread first before ask or open new thread.
savie said:
Same procedure with install custom kernel..
Extract boot.img from pdaXxx.tar (stock rom from doky thread)
Put in /sdcard/boot.img
Install with mai77 method use SGYbiCWM.zip with cwm-recovery from madteam/skin.
Read 1-10post in basic newbie guide from ronnieryan in sticky general section.
Welcome to xda and try with search and read important thread first before ask or open new thread.
Click to expand...
Click to collapse
I readed the basic thread but i did not understand about the KernelUpdate.zip
Many thanks it's work now
Unfortunately, i can not install your kernel. I have try flashing directly savieREV1_Kernel.zip but it's block on the boot logo. I also tried to extract the boog.img from the package and flash with KernelUpdate but it's the same thing... I'm back on kuro. (using XXLF3 stock rom)
Not tried the merruk at the moment
droidcyril said:
I readed the basic thread but i did not understand about the KernelUpdate.zip
Many thanks it's work now
Unfortunately, i can not install your kernel. I have try flashing directly savieREV1_Kernel.zip but it's block on the boot logo. I also tried to extract the boog.img from the package and flash with KernelUpdate but it's the same thing... I'm back on kuro. (using XXLF3 stock rom)
Not tried the merruk at the moment
Click to expand...
Click to collapse
KernelUpdate.zip from harrish?
Im not use that to coz to complicated
The simple method is from mai77 coz u not need put boot.img into zip file like faqbly method.
For my kernel just make sure u have sysinit in system/bin and 99complete in system/etc/init.d (those file from draktemor script) before installing.
I never try any custom rom only stock rom and never have problem with my kernel. I never release it if im not sure its working but if its make problem just i word "not compatible"
Ok thanks i have to make more search about the method mai77 and draktemor script, and retry your kernel
I prefer keep the stock rom at the moment... but i'm interresting to test the kernels !
droidcyril said:
Ok thanks i have to make more search about the method mai77 and draktemor script, and retry your kernel
I prefer keep the stock rom at the moment... but i'm interresting to test the kernels !
Click to expand...
Click to collapse
But dont install draktemor-a2sd im affraid u will get problem again if u use my kernel
Just copy paste and change permission..
Theres a lot of kernel now. U can choose, try, and compare which one is more near with ur need.
Kuro v.1.0 or White v.1.0 is the best kernel for stock rom coz its minimalis kernel with little modification so all features near with stock kernel.
Merruk and latest White kernel is advance kernel coz there alot modification so must prepare backup before try (nandroid backup via cwn and stockrom backup via odin)
cwm can't restore kernel. It doesn't have bmlunlock program.
kurotsugi said:
cwm can't restore kernel. It doesn't have bmlunlock program.
Click to expand...
Click to collapse
I see that the bmlunkock is in the KernelUpdate.zip.
I have found this mai77 method here
It's work fine to restore a stock rom boot.img
I don't find mai77 method without the KernelUpdate but i keep the searchs !
kurotsugi i have tested your kernel some days it's work very well !
haha...my kernel isn't as good as savie's. In most aspect his kernel is better and he's more well versed in kernel development.
I do more read and search and re-test it !
P.S. : the captcha are hard :cyclops:
Ah ok you include the bmlunkock in your kernel.zip
After many tentatives failed to install savie's kernel :crying:
I tried the white 0.8.0 RC3 with success and very easily and work very fine
please can someone give a way to install savie's kernel step by step and give links necessary
i haeve made
- The start step a fresh XXLF3 stock rom flashed
- I'm not afraid do reflash a stock rom, i have already done many times.
- I'm not afraid about data, i have the kies backup of my contacts, the sql lite contacts2.db from /data, the only thing i want to keep is this but i think it's done, don't care
Thanks all !
Finally I succeeded install the savie kernel :laugh:
[email protected] #60
All freq and gov works :good:
Let's go to give some thanks in this thread !
droidcyril said:
Finally I succeeded install the savie kernel :laugh:
[email protected] #60
All freq and gov works :good:
Let's go to give some thanks in this thread !
Click to expand...
Click to collapse
Great's I will try it
- My first mistake was to not read enough the savie thread and links associated.
- My second mistake i tried in first step to install Bacem and GovIO Tweak before the kernel... But the kernel already integrated this.
- Savie should add this on the first post of the thread please !
savie said:
I dont have creeds so i dont know its work or not..
Manual method In stock rom
- create init.d folder /system/etc/init.d
- copy 99complete to system/etc/init.d
- copy sysinit to system/bin
Ps.those file from draktemor-script
- install kernel
Maybe that step can use in creeds too..
Click to expand...
Click to collapse
- And maybe give the link to the draktemor-script in the repencis thread... here (a2sd.zip)
It's very good kernel :laugh:
Now i will try the dual boot and test CM7 but i read more before !
but don't install the draktemor-script
Just extract and copy this files :
- before create init.d folder /system/etc/init.d (stock rom and stock kernel without init.d support)
- copy 99complete to system/etc/init.d
- copy sysinit to system/bin
- fix the permissions
savie add this in your 1 post thread may make som noobs happy
Good day!
Sir Savie and Sir Kurutsogi I would like to ask regarding kernel. By the way I am using stock rom DXLF1 and with Data2SD of Kurutsogi http://forum.xda-developers.com/showthread.php?t=1622052 wherein my sd card has ext3 partition and the internal memory was changed from 290mb to 1gb.
My questions are:
1. If I will use the kernel of Savie (which was used in Icecream Bread rom and EVO X2 rom), will my current Data2SD will still work? If possible where can I get the boot.img file of Savies kernel? Also Sir Savie I was confused when I was reading you thread on kernel, Sir Savie can I get a link from you on the kernel that was used in Icecream Bread rom and Evo X2 rom?
2. If I have installed your kernel Sir Savie, is there a need to install app like the Nofrills CPU or CPU tuner in order to fully used the functions of kernel like changing the governors, i/o sched and frequencies? Or in you kernel, the said apps (CPU Tuner etc.) is already included and once your kernel is installed, all is done?
3. For my usage of SGY wherein, I have the Ram Manager Pro app, Start Up Auditor app, will it still be needed once I used your kernel Sir Savie? What settings should i used in the governors, i/o sched and frequencies if I only used my phone only for texting, calling, playing games (some HD games like assassins creed) fpse emulator, mp3 listening? Currently now my phone can get 88 to 98 mb RAM usage whenever I used the Easy task killer during making my phone iddle? Will this also possible when using Sir Savies kernel?
Sir Savie and Sir Kurutsogi hoping for your response and I would like to apologize to other XDA members for my questions and hoping for your kind understanding.
Thank you
am I dreaming? (lol)
EDIT: please forgive me. I never saw a question addressed politely like this one
1. if you're using my data2sd kernel, then the answer is no. you still can use this data2sd by creating a script in init.d folder. plz check additional stuff section in that thread. you don't need to clean your sdext partition. follow the step 1-4, reboot, done. this method have several bug, I hope you understand with the risk.
2. I don't know if savie include the app inside the zip file. you need to install them manually. nofrills is commonly enough for the govs n iosched modification. no need to use cpu tuner if you already have nofrills.
3. less ram doesn't always give good performance in android system. using a tweak is a lot better than clear the ram manually since it consume your battery a lot. the explanation is quite long. try to google it a lil bit.
kurotsugi said:
am I dreaming? (lol)
EDIT: please forgive me. I never saw a question addressed politely like this one
1. if you're using my data2sd kernel, then the answer is no. you still can use this data2sd by creating a script in init.d folder. plz check additional stuff section in that thread. you don't need to clean your sdext partition. follow the step 1-4, reboot, done. this method have several bug, I hope you understand with the risk.
2. I don't know if savie include the app inside the zip file. you need to install them manually. nofrills is commonly enough for the govs n iosched modification. no need to use cpu tuner if you already have nofrills.
3. less ram doesn't always give good performance in android system. using a tweak is a lot better than clear the ram manually since it consume your battery a lot. the explanation is quite long. try to google it a lil bit.
Click to expand...
Click to collapse
Sir Kurotsugi thank you for your response. My apology for the polite posting. Its just I am new comer here and want to learn a lot from you experts.
Sir in your reply in question #1, it only means that data2sd can be used in savies kernel by creating script init.d folder but it results to bugs. So would it be best if I use savies kernel just used link2sd in order to save the 290 mb internal memory?
Lastly Sir in question #3 it is better to use custom kernel to achieve better ram management and battery used instead of my stock apps ram mgr pro start up auditor and easy task killer?
Sir please kindly reply if I got your advises correctly.
Thank you
savie's kernel support a lot of similar method like a2sd++, amarullz, sem, etc. you can try to use my akuro if you lil bit lazy to google it. for the ram question stuff, you can read this one http://forum.xda-developers.com/showthread.php?t=1767363&page=120
Wow.. Kuro help me to translate it.. lol..
My questions are:
1. If I will use the kernel of Savie (which was used in Icecream Bread rom and EVO X2 rom), will my current Data2SD will still work? If possible where can I get the boot.img file of Savies kernel? Also Sir Savie I was confused when I was reading you thread on kernel, Sir Savie can I get a link from you on the kernel that was used in Icecream Bread rom and Evo X2 rom?
Click to expand...
Click to collapse
EvoX2 use #60REV1
ICB use #6REV2
My latest kernel is #73REV
Data2SD i thing support in my kernel but not with a2sd draktemor. Just make sure to clean 2nd partition to reduce error.
2. If I have installed your kernel Sir Savie, is there a need to install app like the Nofrills CPU or CPU tuner in order to fully used the functions of kernel like changing the governors, i/o sched and frequencies? Or in you kernel, the said apps (CPU Tuner etc.) is already included and once your kernel is installed, all is done?
Click to expand...
Click to collapse
Yes if u wanna change freq, governor, and iosched. Im only use cpumaster application.
3. For my usage of SGY wherein, I have the Ram Manager Pro app, Start Up Auditor app, will it still be needed once I used your kernel Sir Savie? What settings should i used in the governors, i/o sched and frequencies if I only used my phone only for texting, calling, playing games (some HD games like assassins creed) fpse emulator, mp3 listening? Currently now my phone can get 88 to 98 mb RAM usage whenever I used the Easy task killer during making my phone iddle? Will this also possible when using Sir Savies kernel?
Click to expand...
Click to collapse
For all app that u say above i dont have it so u can try
For gaming use max freq with performance gov but for light use 312 with smartassV2 and sio its enough.
savie said:
Wow.. Kuro help me to translate it.. lol..
EvoX2 use #60REV1
ICB use #6REV2
My latest kernel is #73REV
Data2SD i thing support in my kernel but not with a2sd draktemor. Just make sure to clean 2nd partition to reduce error.
Yes if u wanna change freq, governor, and iosched. Im only use cpumaster application.
For all app that u say above i dont have it so u can try
For gaming use max freq with performance gov but for light use 312 with smartassV2 and sio its enough.
Click to expand...
Click to collapse
Sir Savie thank you for your response. Sir just a clarification, the Data2sd of Sir Kurotsugi which is installed in my phone will still work if I use your kernels?
What kernels of yours is the best to use Sir Savie from the three?
Sir Savie, do I still need the boot.img file in your kernels in order that the data2sd to work? Because the boot.img file that I have right now is from Sir Kuro. Sir please kindly include the boot img file for the three kernels which I will choose from.
Thank you again Sir Savie and hoping for your response
ariszon said:
Sir Savie thank you for your response. Sir just a clarification, the Data2sd of Sir Kurotsugi which is installed in my phone will still work if I use your kernels?
Click to expand...
Click to collapse
I never use data2sd from kurotsugi but if i see the script should not problem with my kernel.
What kernels of yours is the best to use Sir Savie from the three?
Click to expand...
Click to collapse
Its hard question, coz everyone have difference preference..
#60REV2 only different in cwm integrated with #60REV1
But for #73REV its minimalist kernel
Sir Savie, do I still need the boot.img file in your kernels in order that the data2sd to work? Because the boot.img file that I have right now is from Sir Kuro. Sir please kindly include the boot img file for the three kernels which I will choose from.
Click to expand...
Click to collapse
U can backup boot.img from kurotsugi..
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
savie said:
I never use data2sd from kurotsugi but if i see the script should not problem with my kernel.
Its hard question, coz everyone have difference preference..
#60REV2 only different in cwm integrated with #60REV1
But for #73REV its minimalist kernel
U can backup boot.img from kurotsugi..
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
Click to expand...
Click to collapse
Good day!
Sir Savie thank you for your response. I just check the three kernel of yours and choose the best according to my preference. Sir sorry for my noob question when you say minimalist it means just a simple kernel that can improve battery and ram usage?
I will just install your kernel through cwm and if I got problem regarding the data2sd, I will just ask question from you.
Thank you
ariszon said:
Good day!
Sir Savie thank you for your response. I just check the three kernel of yours and choose the best according to my preference. Sir sorry for my noob question when you say minimalist it means just a simple kernel that can improve battery and ram usage?
I will just install your kernel through cwm and if I got problem regarding the data2sd, I will just ask question from you.
Thank you
Click to expand...
Click to collapse
Maybe in battery less consume with smartassV2+sio 156-312freq uv -80mV.. but dont know bout ram management coz in my rom only 105-115 in first booting..
savie said:
Maybe in battery less consume with smartassV2+sio 156-312freq uv -80mV.. but dont know bout ram management coz in my rom only 105-115 in first booting..
Click to expand...
Click to collapse
Sir Savie i have already prepared the back up files for tomorrow I will gonna be installing your kernel. Sir please forgive me I have to ask this noob question? What do you mean by the SGYbiCWM.zip in your previous response below
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
Sir I have downloaded your #60REV2 and #73REV and check it, i can find the SGYbicCWM.zip.
Also Sir Savie may I ask again, If I would be using a custom rom and your kernel, will this procedure be the best in order to avoid problems.
1. Flash first in chosen Stock ROM
2. Wipe data and dalvik cache
3. Install the custom rom
4. Install the savie kernel.
Sir hoping for your response and please forgive me If I have so many questions. Thank you for your support
ariszon said:
Sir Savie i have already prepared the back up files for tomorrow I will gonna be installing your kernel. Sir please forgive me I have to ask this noob question? What do you mean by the SGYbiCWM.zip in your previous response below
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
Sir I have downloaded your #60REV2 and #73REV and check it, i can find the SGYbicCWM.zip.
Also Sir Savie may I ask again, If I would be using a custom rom and your kernel, will this procedure be the best in order to avoid problems.
1. Flash first in chosen Stock ROM
2. Wipe data and dalvik cache
3. Install the custom rom
4. Install the savie kernel.
Sir hoping for your response and please forgive me If I have so many questions. Thank you for your support
Click to expand...
Click to collapse
SGYbiCWM.zip is kernel flasher tools method from mai77 u can search coz its old thread but very usefull.. But my kernel is zip package and include that tools so u dont need it again but its very usefull tools if u wanna flash only boot.img file in /sdcard
Nandroid backup is must to reduce something bad.. Yupz u can use that method to install my kernel.. if u dont use custom rom.. after install stock rom u must root ur device then create /system/etc/init.d folder with rootexplorer application or similiar like that application..
Hope u understand with my bad english..
Enjoy ur experience to playing android.. dont worry with bootloop or softbrick coz we are here to help each other..
savie said:
SGYbiCWM.zip is kernel flasher tools method from mai77 u can search coz its old thread but very usefull.. But my kernel is zip package and include that tools so u dont need it again but its very usefull tools if u wanna flash only boot.img file in /sdcard
Nandroid backup is must to reduce something bad.. Yupz u can use that method to install my kernel.. if u dont use custom rom.. after install stock rom u must root ur device then create /system/etc/init.d folder with rootexplorer application or similiar like that application..
Hope u understand with my bad english..
Enjoy ur experience to playing android.. dont worry with bootloop or softbrick coz we are here to help each other..
Click to expand...
Click to collapse
Thank you Sir Savie now I got. That mai77, I already got it before when I use the boot .img of Sir Kuro. Its good that I learned a lot from you Sir Savie
Sir I am now doing installation today. Sir please confirm the procedures below if I am doing it right provided I have all the back ups and nandroid back up. I will be installing a custom rom plus you kernel
1. Flash first in chosen Stock ROM
2. Wipe data and dalvik cache
3. Install the custom rom
4. Install the savie kernel using cwm.
Thank you for your usual support
If i use 2nd partition just format as ext3 dont use ext4/2 to safety in backup and restoring..
Thanks..
savie said:
If i use 2nd partition just format as ext3 dont use ext4/2 to safety in backup and restoring..
Thanks..
Click to expand...
Click to collapse
Good day!
Sir Savie, I have successfully installed you kernel #73REV together with rom Next to ICS by Avijit Ghosh82 in my SGY.
Sir I have some observations regarding your kernel and hoping for your comment or advise. Please see below.
1. When Installed your kernel, I followed everything on your thread wherein use CWM Skin 180, i mount the system, then do custom installation so I can add up other governors, other io scheds, bacem tweak, and all other items found in the custom installation window. Then began installing. After installation it displayed success but in the upper portion (I forgot the exact term) written with the count is displayed 0. Then after exiting the installation window it show up installation success savie in the CWM Skin 180 window. Then I reboot. After reboot, I checked the Settings and Info, in the kernel, it shows the old stock kernel. So i repeat the whole process again 2 times but still stock old kernel name display in the Settings.
What I did is that I do the whole process again but I do not mount the system in CWM. Then after installing and rebooting and checking again in the Settings, it showed up the the name of your kernel.
Sir Savie, is there any effect with what I did when I don't mount the system at CWM but it installed successfully and the name of your kernel appears in the Setting Menu- About the Phone menu? Please enlighten me.
2. Upon installation I noticed some of the governors and io sched in the CPU master is not showing up. So I read your thread again and see the something screw in #73REV kernel in you thread and followed step 2 installation wherein I downloaded and extracted the GovIO-tweak-1.zip then copy all the files in the modules then paste it on the /sdcard/.system-replacer/lib/modules/* then reboot. After I checked in CPU Master, there is some 3 or 4 governors lacking and io sched all are present.
Sir Savie, will there any problems arise if it lacks 3 or 4 governors?
3. Then I also notice in the main option of CPU Master is use max 312 min 156 then smartassv2 then tick the apply on boot then at the io sched I selected sio then apply. Whenever I shutdown then turn it on again, in the CPU Master it boot up the settings in the main menu i encoded which is max 312 min 156 then smartassv2 there i have no problem because CPU Master follows my setting. But in the io sched same scenario off then on SGY from my original setting sio it always choose deadline.
Sir Savie how can I make sio as the default selection whenever I turn off/on SGY?
4. In the CPU Master I dont see the option for changing the undervolting. Sir is it okay I I don't have the option for changing the volt and run the default volt in #73REV kernel which is -80mV?
5. I used Link 2sd because the data2sd of Sir Kuro doesn't work on your kernel then i link the CPU master in SD card. Sir Savie, will there be problems in terms of using the CPU Master when loading or changing governors or io sched?
Sir Savie my apologies If I have so many observation. Sir Savie hoping for your kind responses with my 5 questions.
Thank you
ariszon said:
Good day!
Sir Savie, I have successfully installed you kernel #73REV together with rom Next to ICS by Avijit Ghosh82 in my SGY.
Sir I have some observations regarding your kernel and hoping for your comment or advise. Please see below.
1. When Installed your kernel, I followed everything on your thread wherein use CWM Skin 180, i mount the system, then do custom installation so I can add up other governors, other io scheds, bacem tweak, and all other items found in the custom installation window. Then began installing. After installation it displayed success but in the upper portion (I forgot the exact term) written with the count is displayed 0. Then after exiting the installation window it show up installation success savie in the CWM Skin 180 window. Then I reboot. After reboot, I checked the Settings and Info, in the kernel, it shows the old stock kernel. So i repeat the whole process again 2 times but still stock old kernel name display in the Settings.
What I did is that I do the whole process again but I do not mount the system in CWM. Then after installing and rebooting and checking again in the Settings, it showed up the the name of your kernel.
Sir Savie, is there any effect with what I did when I don't mount the system at CWM but it installed successfully and the name of your kernel appears in the Setting Menu- About the Phone menu? Please enlighten me.
Click to expand...
Click to collapse
If u in 73rev so just make sure in recovery mode (cwm) u mount /system before install zip package like re-install savie73rev_kernel.zip..
Dont worry in count 0 coz its bugs from aroma..
To change other kernel put other kernel in /sdcard/boot.img then follow step in above but in custom installation choose other kernel..
2. Upon installation I noticed some of the governors and io sched in the CPU master is not showing up. So I read your thread again and see the something screw in #73REV kernel in you thread and followed step 2 installation wherein I downloaded and extracted the GovIO-tweak-1.zip then copy all the files in the modules then paste it on the /sdcard/.system-replacer/lib/modules/* then reboot. After I checked in CPU Master, there is some 3 or 4 governors lacking and io sched all are present.
Sir Savie, will there any problems arise if it lacks 3 or 4 governors?
Click to expand...
Click to collapse
Yupz if im not wrong lulzactive, ondemandx, etc..
3. Then I also notice in the main option of CPU Master is use max 312 min 156 then smartassv2 then tick the apply on boot then at the io sched I selected sio then apply. Whenever I shutdown then turn it on again, in the CPU Master it boot up the settings in the main menu i encoded which is max 312 min 156 then smartassv2 there i have no problem because CPU Master follows my setting. But in the io sched same scenario off then on SGY from my original setting sio it always choose deadline.
Sir Savie how can I make sio as the default selection whenever I turn off/on SGY?
Click to expand...
Click to collapse
Go to setting in cpumaster then uncheck all..
4. In the CPU Master I dont see the option for changing the undervolting. Sir is it okay I I don't have the option for changing the volt and run the default volt in #73REV kernel which is -80mV?
Click to expand...
Click to collapse
I dont know is theres app to show voltage now.. just use voltage-info.zip u see ur voltage..
5. I used Link 2sd because the data2sd of Sir Kuro doesn't work on your kernel then i link the CPU master in SD card. Sir Savie, will there be problems in terms of using the CPU Master when loading or changing governors or io sched?
Click to expand...
Click to collapse
Nope, i use that too..
Sir Savie my apologies If I have so many observation. Sir Savie hoping for your kind responses with my 5 questions.
Thank you
Click to expand...
Click to collapse
Lol.. no problem as long i can.. sorry if my explanation confusing coz im bad in english..
So guys, I'm developing a ROM but when I flash it the phone lost the root acess. How can I keep it? There's is a way to inject the SU?
Just download the update.zip file for your device
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
TomalinSGY said:
Just download the update.zip file for your device
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
Click to expand...
Click to collapse
But I want to people use my ROM, others custom ROMs maintain the root acess...
eduds said:
But I want to people use my ROM, others custom ROMs maintain the root acess...
Click to expand...
Click to collapse
Oh. I think you should put the su in system/app folder in your rom. Sorry, I don't have enough knowledge about that. Im a noob here
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
TomalinSGY said:
Oh. I think you should put the su in system/app folder in your rom. Sorry, I don't have enough knowledge about that. Im a noob here
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
Click to expand...
Click to collapse
I thought about it but do not know if it's enough. Anyway, thank you!
Look what's inside update.zip or similar zip and copy its content to the same location in your custom ROM
Sent from my GT-S5360
study the root access,
how it executes and how it runs,
eduds said:
I thought about it but do not know if it's enough. Anyway, thank you!
Click to expand...
Click to collapse
No problem. Just press the thanks button if I helped :beer: Additional answer: Find the update.zip(or the file needed to root your device) then you can find inside it the superuser app and three files. (I don't know what's the file format ) I think, in my opinion, you can put that in your rom. But be sure it's a zip file. I checked my update.zip file and I had found that files
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
TomalinSGY said:
No problem. Just press the thanks button if I helped :beer: Additional answer: Find the update.zip(or the file needed to root your device) then you can find inside it the superuser app and three files. (I don't know what's the file format ) I think, in my opinion, you can put that in your rom. But be sure it's a zip file. I checked my update.zip file and I had found that files
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
Click to expand...
Click to collapse
If I do it the updater-script will be changed, i.d. the commands to flash the ROM will be changed and it'll not install, just the root acess will.
I'm thinking... if I put the commands the updater-script together?
Anyway, I'll study more.
eduds said:
If I do it the updater-script will be changed, i.d. the commands to flash the ROM will be changed and it'll not install, just the root acess will.
I'm thinking... if I put the commands the updater-script together?
Anyway, I'll study more.
Click to expand...
Click to collapse
Well, in that case I don't know how Sorry dude. But I guess you should study on how to put that just like in the other roms :beer:
Hi I am new to android. I decided to install CyanogenMod on my Indian sgy rooted and had stock rom with Touchwiz and android 2.3.6. So I got some instructions from here . Then I downloaded the file of around 120MB.I booted into recovery mode. I selected update from SD card and then selected CWM.zip I got from XDA thread. It entered the CWM and then I selected Format system, Clear cache and clear Dalvik cache. Then I selected the update from SD card and then selected the CM zip file of 120MB I had in my phone. It installed and then it showed no errors. After conformation I rebooted the phone. It showed Samsung Galaxy Y and then turned black with no Samsung logo. I thought it was doing something and then after 3 minutes I touched the screen it began to draw circles wherever I touched. I thought I bricked the phone. After two minutes I turned it off and then again got into recovery mode and then to CWM mode and got my phone back with Nandroid backup I had.
Was the phone installing and I interrupted it by touching it?
Is there any error on my installation steps?
Kindly reply me how to install this CM and tell me if you get the same and give me the link you used for installing CM
Apologies for poor english if you find any.
you installed cm9
to use cm9 you need to install whitexp kernel else you will have the track pad which you experienced
you should also know cm9 is not stable in this device - no network wifi data etc - all it does is boot
marcussmith2626 said:
you installed cm9
to use cm9 you need to install whitexp kernel else you will have the track pad which you experienced
you should also know cm9 is not stable in this device - no network wifi data etc - all it does is boot
Click to expand...
Click to collapse
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Xtreak said:
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Click to expand...
Click to collapse
no you will not get stock kernel back by restoring nandroid backup
to go back to stock rom/kernel you need to flash stock rom firmware via odin
This is because the kernels that support cm will format your system to ext - stock kernel does not support ext so your phone will not boot so you need to flash stock rom via odin to go back to stock
all roms including stock based cm7 and aosp are found in the dev section - read the op - full instructions are given there - if you flash a cm7 or aosp rom you will need to flash percys kernel first and reboot to recovery and format system data cache to remove mount errors
choose one that works best for you
marcussmith2626 said:
no you will not get stock kernel back by restoring nandroid backup
to go back to stock rom/kernel you need to flash stock rom firmware via odin
This is because the kernels that support cm will format your system to ext - stock kernel does not support ext so your phone will not boot so you need to flash stock rom via odin to go back to stock
all roms including stock based cm7 and aosp are found in the dev section - read the op - full instructions are given there - if you flash a cm7 or aosp rom you will need to flash percys kernel first and reboot to recovery and format system data cache to remove mount errors
choose one that works best for you
Click to expand...
Click to collapse
I will try them . Thanks for helping me out. The stock ROM are in hotfile which was shutdown I think. Any other mirrors or links to get the stock kernel and ROM?
Xtreak said:
I will try them . Thanks for helping me out. The stock ROM are in hotfile which was shutdown I think. Any other mirrors or links to get the stock kernel and ROM?
Click to expand...
Click to collapse
my sticky thread at the top of the dev section has them - please look through the dev section
here is link to my firmware thread
http://forum.xda-developers.com/showthread.php?t=2568853
marcussmith2626 said:
my sticky thread at the top of the dev section has them - please look through the dev section
here is link to my firmware thread
http://forum.xda-developers.com/showthread.php?t=2568853
Click to expand...
Click to collapse
Ok I will see them . Great work. Happy hacking
Xtreak said:
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Click to expand...
Click to collapse
I recomand you to install MiniRom Touchwiz http://forum.xda-developers.com/showthread.php?t=2385686
or Hyperion 8
http://forum.xda-developers.com/showthread.php?t=2457022
imElectronica said:
I recomand you to install MiniRom Touchwiz http://forum.xda-developers.com/showthread.php?t=2385686
or Hyperion 8
http://forum.xda-developers.com/showthread.php?t=2457022
Click to expand...
Click to collapse
I found the final build. I think its discontinued a few days ago correct me if I am wrong. I heard it has some wifi problems. Can we install it with stock kernel?
imElectronica said:
I recommend you to install (rest of quote removed)
Click to expand...
Click to collapse
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
marcussmith2626 said:
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
Click to expand...
Click to collapse
Sorry. Guess I can stop here. I downloaded hyperion 8 . Waiting for my phone to get charged.
marcussmith2626 said:
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
Click to expand...
Click to collapse
I'm not telling about best....I express my opinion.....its depends upon u to use this..
---------- Post added at 11:24 AM ---------- Previous post was at 11:19 AM ----------
Xtreak said:
I found the final build. I think its discontinued a few days ago correct me if I am wrong. I heard it has some wifi problems. Can we install it with stock kernel?
Click to expand...
Click to collapse
Yes use mini rom with stock kernel....I use it for 6 month n no prob found....i use it with hellsfusion kernel n found wifi prob but it works smooth with stock kernel.....this is a stable one. this is my fav. rom i ever use.