[Q] hyperion to cyanogenmod 11 - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

Hi, thanks to this forum finally i have hyperion 9 on baseband DDMD1, kernel 2.6.35.7 DELL227 #1, KST 2013...
i want to change it to CM 11...should i flash the cyanogen 11 file direclty over it? i read the instructions but can not understand it.
i have not flashed any kernel on my device... any help will be much appreciated...
and thanks too much in advanced,, this forum helped me in past.

pappupadan said:
Hi, thanks to this forum finally i have hyperion 9 on baseband DDMD1, kernel 2.6.35.7 DELL227 #1, KST 2013...
i want to change it to CM 11...should i flash the cyanogen 11 file direclty over it? i read the instructions but can not understand it.
i have not flashed any kernel on my device... any help will be much appreciated...
and thanks too much in advanced,, this forum helped me in past.
Click to expand...
Click to collapse
You must first flash the cm11 kernel that contains CWM6 either through cwm5 (if you are on stock kernel and have stock recovery flash a temporary CWM zip) or use the odin version and flash via odin (put it in pda section) - links on rom thread
Once that has been done reboot to recovery and make sure you have cwm6
Then format system data and cache
Mount system data cache
Flash rom zip

marcussmith2626 said:
You must first flash the cm11 kernel that contains CWM6 either through cwm5 (if you are on stock kernel and have stock recovery flash a temporary CWM zip) or use the odin version and flash via odin (put it in pda section) - links on rom thread
Once that has been done reboot to recovery and make sure you have cwm6
Then format system data and cache
Mount system data cache
Flash rom zip
Click to expand...
Click to collapse
you mean i need to flash this one http://forum.xda-developers.com/galaxy-y/development/kernel-getux-kernel-v1-beta-2-t2907168
then CM11 RC11 from here http://download.androidarmv6.org/_builds/totoro/stable/
is there any risk of bricking?
thank you very much...

pappupadan said:
you mean i need to flash this one http://forum.xda-developers.com/galaxy-y/development/kernel-getux-kernel-v1-beta-2-t2907168
then CM11 RC11 from here http://download.androidarmv6.org/_builds/totoro/stable/
is there any risk of bricking?
thank you very much...
Click to expand...
Click to collapse
That kernel is an unofficial kernel not from the dev of cm11 for this phone so no support from
him can be given if you use that one but you can if you want
The official kernel with cmw6 is located here - the zip is for flashing via CWM and the tar is for odin - the choice is yours
https://www.mediafire.com/folder/bj3a19sdm5yre/totoro
The rom is located
http://download.androidarmv6.org/_builds/totoro/
And the rom thread with instructions is located
http://forum.xda-developers.com/showthread.php?t=2766229
If done wrong you can soft brick your phone but can be sorted with a simple flashing of stock rom via odin - link to my firmware thread is in my signature

I install CM11 over H9 directly by first flashing ClockworkMod v6.0.5.3 & then latest full OTA build for totoro (androidarmv6.org)
CM11 have its own kernel.

thank you very very much marcus smith... i installed it yesaterday,,, everything is fine. flashing went successful.
marcussmith2626 said:
That kernel is an unofficial kernel not from the dev of cm11 for this phone so no support from
him can be given if you use that one but you can if you want
The official kernel with cmw6 is located here - the zip is for flashing via CWM and the tar is for odin - the choice is yours
https://www.mediafire.com/folder/bj3a19sdm5yre/totoro
The rom is located
http://download.androidarmv6.org/_builds/totoro/
And the rom thread with instructions is located
http://forum.xda-developers.com/showthread.php?t=2766229
If done wrong you can soft brick your phone but can be sorted with a simple flashing of stock rom via odin - link to my firmware thread is in my signature
Click to expand...
Click to collapse

I have hell fusion kernel with hyperion 9 which is bricked and boots into recovery.how to falsh cm11 now.how to get stock kernel(someone said I should be on kernel for cm11).....please help

–NigthFury– said:
I have hell fusion kernel with hyperion 9 which is bricked and boots into recovery.how to falsh cm11 now.how to get stock kernel(someone said I should be on kernel for cm11).....please help
Click to expand...
Click to collapse
Please don't post the same question multiple times - Iv answered you in another thread & please read the instructions on the cm11 thread - everything is there for you - you only have to read it

Related

How to back to GB?

I've the CriskeloROM ICS ZCLP6 and I'm afraid of brick my phone. So I want to go back to GB but I don't know if I'm with i9220 kernel or not or one safe way to go back to GB.
A good tutorial will be good to me and to the others. I know that anything is safe because we don't know the real cause of this, but...
EDIT: There's my phone info:
Model number: GT-N7000
Android Version: 4.0.3
Baseband version: N7000XXLP1
Kernel version:
3.0.15-I9220ZCLP5-CL295568
[email protected] #3
SMP PREEMPT Tue Mar 27 00:15:32 KST 2012
Build number: CriskeloROM ICS ZCLP6
this has been asked and answered about a thousand times recently
flash a gb kernel such as abyss 4.2 and then restore from a backup
Richy99 said:
this has been asked and answered about a thousand times recently
flash a gb kernel such as abyss 4.2 and then restore from a backup
Click to expand...
Click to collapse
Thank you. I search for "back do GB", "restore from i9220 bootloader" and others and dont find anything.
Thank you again.
- dowmload any GB custom rom, copy to your sdcard
- download jBroid Kernel Cleaning, copy to yout sdcard
- download AbyssNote v4.2 kernel, copy to your sdcard
- reboot to CWM recovery
- flash jBroid Kernel Cleaning
- flash AbyssNote v4.2 kernel
- reboot recovery
- flash new GB custom rom
- flash new kernel (if you prefer other than AbyssNote kernel)
- FULL WIPE
- REBOOT
thehackersz said:
- dowmload any GB custom rom, copy to your sdcard
- download jBroid Kernel Cleaning, copy to yout sdcard
- download AbyssNote v4.2 kernel, copy to your sdcard
- reboot to CWM recovery
- flash jBroid Kernel Cleaning
- flash AbyssNote v4.2 kernel
- reboot recovery
- flash new GB custom rom
- flash new kernel (if you prefer other than AbyssNote kernel)
- FULL WIPE
- REBOOT
Click to expand...
Click to collapse
Flash in the "bad" CWM? That script will format partitions without wipe function and without detiorate the eMMC, thats it?
pauloallex24 said:
Flash in the "bad" CWM? That script will format partitions without wipe function and without detiorate the eMMC, thats it?
Click to expand...
Click to collapse
you're on leaked rom CriskeloROM ICS ZCLP6 not LPY ICS rom.
thehackersz said:
you're on leaked rom CriskeloROM ICS ZCLP6 not LPY ICS rom.
Click to expand...
Click to collapse
But this ROM is not based on a REPACK? You are saying that this ROM is safe?
leaked ics rom (REPACK) and official ics LPY rom both are dangerous
thehackersz said:
leaked ics rom (REPACK) and official ics LPY rom both are dangerous
Click to expand...
Click to collapse
So I'm not understanding something. This is a leaked ics, so this is a repack that is dangerous and not recommended to use CWM. So if I flash that ZIP's from CWM don't I'm on the way to brick the phone?
Thanks for the help you are giving to me.
This very detailed video should help: http://www.youtube.com/watch?v=jr3DDEh8vyc&feature=plcp
pauloallex24 said:
So I'm not understanding something. This is a leaked ics, so this is a repack that is dangerous and not recommended to use CWM. So if I flash that ZIP's from CWM don't I'm on the way to brick the phone?
Thanks for the help you are giving to me.
Click to expand...
Click to collapse
you're wrong, CWM problem is for offical LPY ICS rom germany not for the Leaked rom ICS ZCLP6. You can still use CWM to flash kernel, but DON'T WIPE ANYTHING.
Both of this rom are dangerous, and my advise to you is to revert back to GB rom.
jBroid cleaner is new to me. Should i use it, even though i'm already reverted back to GB ROM and flashed speedmod kernel?
send from my sparkling white Galaxy Note, using XDA Premium.
Well, I understant now
Thank you all for the help! I will revert back to GB this night.
[email protected] said:
jBroid cleaner is new to me. Should i use it, even though i'm already reverted back to GB ROM and flashed speedmod kernel?
send from my sparkling white Galaxy Note, using XDA Premium.
Click to expand...
Click to collapse
is not really necessary to flash kernel cleaner but many of us using it before flashing other kernel
Hi. I've done this and I'm on GB now. But now I have a new question. Because I flash the LP1 ROM, when I go to download mode, it says "Binary: Custom". I supose that was because I flash the I9220 Bootloader.
If I want to reset the flash counter with a Jig to sent the phone to warranty (if I need), probably I need to flash the "samsung oficial" bootloader.
Anyone can explay this better ou help me flashing the original bootloader and leave the phone in warranty again, please?
EDIT: If helps, I have a ROM that I copy from Kies when I upgrade the first time the note with a oficial ROM. If when I flash that, it will install the original bootloader, say the ODIN options and I will flash it.
THanks for any help.

How do I go revert to Gingerbread from a an ICS custom rom?

If there are instructions on how to do this please post a link or maybe someone can help? Thank you.
Note: I am currently using Imikla's ICS rom, not sure what version...I flashed this in March so its based on an early ICS leak.
My kernel is: 3.0.15-I9220ZCLP1-CL131270 [email protected] #3
plenty of these types of posts
flash a gb kernel such as abyss 4.2 and you can then flash a gb rom fgrom cwm or you can use odin to flash stock
Richy99 said:
plenty of these types of posts
flash a gb kernel such as abyss 4.2 and you can then flash a gb rom fgrom cwm or you can use odin to flash stock
Click to expand...
Click to collapse
I presume it is not safe to flash via CWM? Can I flash using odin PC?
Why don't you search through threads there has been plenty made for this
Sent from my GT-N7000 using xda premium
sumsy2011 said:
Why don't you search through threads there has been plenty made for this
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Because there aren't any clear instruction of how to flash and what settings to use to flash a kernel and the little details.
Entropy512 said:
The safest way to get away from ICS is:
Use PC Odin or Heimdall to flash a safe Gingerbread kernel with working CWM (NOT a full firmware package, and DO NOT mess with repartitioning), such as a Gingerbread CF-Root release. From there you can wipe and then flash whatever you want.
To be clear - JUST flash a safe kernel and then wipe/flash using that - don't flash anything else in PC Odin. If the full firmware package you flash has bootloaders it could hose you.
Click to expand...
Click to collapse
entropys instructions
I've flashed the Abyss kernel as stated and now I have a problem, it stays at the loading screen, excellent instructions guys!
Flash any stock GB ROM via PC ODIN. Do not tick repartition.
Try flashing a single file ROM, not 3 files ROM.
In case if fails, then try flashing a stock 3 files ROM (PDA, MODEM & CSC) alongwith .PIT file and re-partition checked.

::Help needed::

hey every1,
details of the note m using nw :
Kernel - 3.0.15-N7000DDLP8-CL551076
[email protected]#3
SMP PREEMPT Sat May 12 16:05:17 KST 2012
Build - IML74K.DDLP8
Now what i want to noe is hw to root this device and install a custom rom...
i want to try ouy the King droid 3.0 rom.......
i went thru quite a fu topics regarding dis but got confused (am a noob )
Thanx...
Haha, Im also in the same boat
Had my Note for about 5 hours now and still using stock !!!! I dont understand the different methods, One says use ODIN, the other says avoid ODIN. One says flash in stock recovery, One says downgrade to lower GB then upgrade...
Totally different than the SGS1 / HTC forums
azzledazzle said:
Haha, Im also in the same boat
Had my Note for about 5 hours now and still using stock !!!! I dont understand the different methods, One says use ODIN, the other says avoid ODIN. One says flash in stock recovery, One says downgrade to lower GB then upgrade...
Totally different than the SGS1 / HTC forums
Click to expand...
Click to collapse
wt to do??hw to go about it???? :?
Search the forum? Then you will answers...
/CK
Café King said:
Search the forum? Then you will answers...
/CK
Click to expand...
Click to collapse
i did search and got confused...tats why ......
Simple, Downgrade to a older GB using PC odinthe rom must be one of the 'root able' roms found here http://forum.xda-developers.com/showthread.php?t=1424997
Then once you have downgraded use this method to gain root and cwm http://forum.xda-developers.com/showthread.php?t=1329360 (scroll to the bottom of the op)
Thanks man, But on another thread (CleaNote ROM) it says this:
Flash STOCK ICS with PC odin
boot the rom
reboot to dowload mode
flash CF kernel
reboot rom
copy CleaNote ROM zip to phone
reboot to CWM
install zip
Click to expand...
Click to collapse
Do i have to do that ^^ Or can i just root my current stock GB ROM + Add CWM, Then flash Abyss Kernel, Then flash the ROM of my choice ?
Its these conflicting posts what puzzle me lol.
azzledazzle said:
Thanks man, But on another thread (CleaNote ROM) it says this:
Do i have to do that ^^ Or can i just root my current stock GB ROM + Add CWM, Then flash Abyss Kernel, Then flash the ROM of my choice ?
Its these conflicting posts what puzzle me lol.
Click to expand...
Click to collapse
If you are looking to flash a rom that has step by step instructions on how to install it then follow those, as some roms require different instructions.
But if you want to gain root and CWM and are not sure on what rom you want first what I have said is the easiest way to go
Well that was just what i read on one of the posts, In the OP it just says flash from CWM, Providing you have a safe kernel and root.
My current ROM is LC1 which is one of the unrootable ROMs, and my DLoad for ICS is almost complete !
I think i will just flash ICS then a safe kernel, Then the CleaNote ROM. Im just so scared about the brickbug lol. I will wipe before i update, As GB is safe right ?
azzledazzle said:
Well that was just what i read on one of the posts, In the OP it just says flash from CWM, Providing you have a safe kernel and root.
My current ROM is LC1 which is one of the unrootable ROMs, and my DLoad for ICS is almost complete !
I think i will just flash ICS then a safe kernel, Then the CleaNote ROM. Im just so scared about the brickbug lol. I will wipe before i update, As GB is safe right ?
Click to expand...
Click to collapse
GB is safe yes.
Sent from my GT-N7000 using xda premium
ICS flashed fine
Got root and CWM, Just installed Abyss kernel. Now doing a nandroid, Then Im gonna flash CleaNote,
Will avoid the wipe option even tho it says its safe in this kernel, Just not ready to take the risk yet.
Thanks for the advice, Been debating whether to take the plunge all day.
EDIT: spoke to soon, Now Im stuck on Splash screen, Dunno why, The nandroid was successful, But i cannot boot back into recovery now.
Looks like I'll have to flash the ICS again.
Abyss kernel is for gb not for ics. When cleanote said a safe kernel it is speedmod k3-3 or franco r3,r4,r5& r6. They use abyss kernel in wiping data in ics recovery just to be safe and the right step are 1. Flash the abyss kernel 4.2( after that do not wipe or flash your custom rom yet, very important to remember it will superbreak your phone), 2. Go to advanced and find reboot to recovery and click it and do the wiping their, its safe 3. and then you can flash the custom rom. In the case of cleanote theirs no need use abyss if you already flash speedmod or franco kernel in your ics before flashing the cleanote rom because cleanote 1.02 will automatically wipe your data.
Thanks man !! I'll get the hang of this one day
Im on rooted stock ICS now, With CF Kernel, So I just need to flash speedmod kernel( I loved their kernels & ROMs on the SGS1) reboot recovery, Then install CleaNote ?
I almost got it right lol
After flashing speedmod k3-3 click REBOOT SYSTEM NOW(get out of the recovery first) then check in the setting if you really have the speedmod kernel in your system running to be sure and enter recovery again and flash the cleanote rom, thats it.

[Q] Jelly Blast Custom Kernel

Hi Guys, This is my first post here in Q & A Section and I want to ask something regarding the Jelly Blast Custom Kernel built-in when installed, I want to ask it on Jelly Blast Thread but sadly, the thread is closed so I decided to make a question so I can gain some stock knowledge when I've this ROM running on my phone. If I uninstall Jelly Blast using my backup NANDROID, Will the built-in custom kernel will be also uninstalled ? Thanks.
if your nandroid backup includes boot.img (kernel) and you restore it fully (i mean not partially by selecting manually what all to restore) the existing kernel (kuro) of your custom Rom should also be replaced afaik .
Yes If UR Backup contains kernel.
URL Jelly blast keRnel will be Uninstalled.
nikufellow said:
if your nandroid backup includes boot.img (kernel) and you restore it fully (i mean not partially by selecting manually what all to restore) the existing kernel (kuro) of your custom Rom should also be replaced afaik .
Click to expand...
Click to collapse
D_Rising_Pheonix said:
Yes If UR Backup contains kernel.
URL Jelly blast keRnel will be Uninstalled.
Click to expand...
Click to collapse
How about If I will flash my in-box firmware using Odin, Does Odin will fail flashing the stock firmware If I'm using Custom ROM w/ Custom Kernel? Is there additional things to insert with Odin before flashing or just normal flashing by Doky?, I mean Do I need to insert BOOTLOADER, totoro_0623.pit, tick repartion etc. I really like the ROM so much and after I got all my questions answered, I'll install the ROM and Does the Custom ROM and Custom Kernel will be Uninstalled If I flashed my in-box firmware using Odin ? Thanks. And sorry for too many questions.
no Additional things just
Follow this Tutorial.
in the given link
www.yhdgames.blogspot.com/2012/07/flash-stock-rom-on-galaxy-ywith-odin.html?m=1
I think he means this link
http://forum.xda-developers.com/showthread.php?t=1465800
Don't listen to none xda guides they don't know what their talking about also flashing via Odin will flash still stock kernel also
tingtingin said:
I think he means this link
http://forum.xda-developers.com/showthread.php?t=1465800
Don't listen to none xda guides they don't know what their talking about also flashing via Odin will flash still stock kernel also
Click to expand...
Click to collapse
Yes, At terms of flashing, XDA is only my trusted site and sure not to leave my phone to dust.

Flashing a Custom Kernel

Hi, I have some question about flashing a custom kernel (+Franco kernel):
1. Let's say I have Franco Kernel and a new version comes out, do I need to flash it again or I can use the app to flash it? Also, do I need to wipe something before I flash?
2. If I switch to another kernel from Franco, what exactly do I have to do? Just wipe cache+dalvik and re-flash my rom?
3. Will I have to re-flash the kernel after each rom update?
Thanks!
Hi I'm not sure about #1 because I don't use Franco's app, but 2) Sometimes you can just flash a new kernel over the old one. Personally I prefer to dirty flash my ROM, then flash my choice of kernel. 3) You'll need to flash the kernel after a ROM update. The ROM is compiled with it's own kernel.
chrisbo4 said:
Hi I'm not sure about #1 because I don't use Franco's app, but 2) Sometimes you can just flash a new kernel over the old one. Personally I prefer to dirty flash my ROM, then flash my choice of kernel. 3) You'll need to flash the kernel after a ROM update. The ROM is compiled with it's own kernel.
Click to expand...
Click to collapse
So I need to dirty flash my ROM (=wipe cache+dalvik & flash) then install a new kernel? Thanks.
Still need an answer to Q1 though
I use CM 10.1 and just flash the new Franco kernel ZIP over the old one and it's been fine...
[email protected] said:
Hi, I have some question about flashing a custom kernel (+Franco kernel):
1. Let's say I have Franco Kernel and a new version comes out, do I need to flash it again or I can use the app to flash it? Also, do I need to wipe something before I flash?
2. If I switch to another kernel from Franco, what exactly do I have to do? Just wipe cache+dalvik and re-flash my rom?
3. Will I have to re-flash the kernel after each rom update?
Thanks!
Click to expand...
Click to collapse
1. When a new version comes out all you have to do is flash the new version on top of the old one. You can simply download it from the app and let it do a auto-flash. No need to wipe anything.
2. It depends. Some kernels will need you to flash the stock kernel first then flash the custom kernel you want to you. Ex. Faux kernel. Don't forget to read the first post of every thread to look for installation instructions.
3. Yes, you will need to reflash the kernel after a rom is flashed. Make sure to flash the kernel last.
Sent from my SGH-T999 using Tapatalk 2
scream4cheese said:
1. When a new version comes out all you have to do is flash the new version on top of the old one. You can simply download it from the app and let it do a auto-flash. No need to wipe anything.
2. It depends. Some kernels will need you to flash the stock kernel first then flash the custom kernel you want to you. Ex. Faux kernel. Don't forget to read the first post of every thread to look for installation instructions.
3. Yes, you will need to reflash the kernel after a rom is flashed. Make sure to flash the kernel last.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
1. Does the app need a special recovery to work? I have a TWRP recovery..
2. What do you mean by stock kernel? And is it correct that Franco is the only kernel that I need to re-flash my ROM to switch to another kernel because it changes something in the ramdisk? If so, do I just need to do a dirty flash?
Thanks.
[email protected] said:
1. Does the app need a special recovery to work? I have a TWRP recovery..
2. What do you mean by stock kernel? And is it correct that Franco is the only kernel that I need to re-flash my ROM to switch to another kernel because it changes something in the ramdisk? If so, do I just need to do a dirty flash?
Thanks.
Click to expand...
Click to collapse
1. No special recovery needed. I too use TWRP.
2. Nothing special need be done to flash to Franco. Going from Franco to another kernel it is easiest to reflash your ROM. You are correct about the ramdisk.
grubbster said:
1. No special recovery needed. I too use TWRP.
2. Nothing special need be done to flash to Franco. Going from Franco to another kernel it is easiest to reflash your ROM. You are correct about the ramdisk.
Click to expand...
Click to collapse
2. So going from Franco to another kernel - just dirty flash without a factory reset?
Thank you very much.
[email protected] said:
1. Does the app need a special recovery to work? I have a TWRP recovery..
2. What do you mean by stock kernel? And is it correct that Franco is the only kernel that I need to re-flash my ROM to switch to another kernel because it changes something in the ramdisk? If so, do I just need to do a dirty flash?
Thanks.
Click to expand...
Click to collapse
1. Having a recovery is good. When you download a new kernel there is an option to let it do a auto-flash and it'll flash it you. The phone will reboot itself when it's done.
2. Some custom kernels need to flash the stock kernel, (the original factory kernel that it's shipped in) if you're going to switch to another custom kernel like Faux's kernel. So when the next time you want to make a switch to another kernel, please make sure to read the first post of the thread to look for instructions to install the kernel. If you're updating to a new rom or switching to a new rom, you will need to flash whichever custom kernel you were using on top of the updated/new rom. When you flash a new rom, it is recommended to do a full wipe to avoid issues. After every rom flash you need to flash the kernel.
http://forum.xda-developers.com/showthread.php?t=2008222
---------- Post added at 10:20 AM ---------- Previous post was at 10:19 AM ----------
[email protected] said:
2. So going from Franco to another kernel - just dirty flash without a factory reset?
Thank you very much.
Click to expand...
Click to collapse
No. no. You don't need to do a factory reset. I don't know how many times I'm going to say this but read my answers to all of your questions again. (Don't mean to sound like a jerk or anything)
scream4cheese said:
1. Having a recovery is good. When you download a new kernel there is an option to let it do a auto-flash and it'll flash it you. The phone will reboot itself when it's done.
2. Some custom kernels need to flash the stock kernel, (the original factory kernel that it's shipped in) if you're going to switch to another custom kernel like Faux's kernel. So when the next time you want to make a switch to another kernel, please make sure to read the first post of the thread to look for instructions to install the kernel. If you're updating to a new rom or switching to a new rom, you will need to flash whichever custom kernel you were using on top of the updated/new rom. When you flash a new rom, it is recommended to do a full wipe to avoid issues. After every rom flash you need to flash the kernel.
http://forum.xda-developers.com/showthread.php?t=2008222
---------- Post added at 10:20 AM ---------- Previous post was at 10:19 AM ----------
No. no. You don't need to do a factory reset. I don't know how many times I'm going to say this but read my answers to all of your questions again. (Don't mean to sound like a jerk or anything)
Click to expand...
Click to collapse
I think that's what he was saying/asking... That's correct, no need to factory reset.

Categories

Resources