Database Users

L5[610] problems with boot on recovery and download mode

Hey all !
I have a LG Optimus L5 E610 with JB 4.1.2 V20C and i want to put CWM recovery on it, because i want to have CM10 on it.
I have now a CWM recovery but it doesn`t work . I tried with cmd reboot recovery but it appear only the LG Logo and it is stuck there . I tried to enter manually in recovery or download mode [ Volume UP & Down , power buttom and the usb cable ] but it doesn`t work . Is the Logo stucked or is a hard reset . On ICS i could enter in CWM recovery mode , but now with the JB i cannot . And i cannot flash again the JB because my download mode doesn`t work.
PS : i tried a bootloader recovery / other cwm recovery from another L5 with v20c but it doesn`t work either.
Any ideas how i can solve this?
Thanks.

I have the same problem but with the p708, i think the bootloader is damaged

I am not sure is because of the bootloader because i instaled another bootloader from somebady`s LG L5 with v20c , i got bootloader unlocked and another cwm recovery, but i still cannot boot in download mode or recovery mode . I am waiting for ideas.

If anyone had this problem too and resolved it, we are waiting for ideas ^^

Sabyn said:
Hey all !
I have a LG Optimus L5 E610 with JB 4.1.2 V20C and i want to put CWM recovery on it, because i want to have CM10 on it.
I have now a CWM recovery but it doesn`t work . I tried with cmd reboot recovery but it appear only the LG Logo and it is stuck there . I tried to enter manually in recovery or download mode [ Volume UP & Down , power buttom and the usb cable ] but it doesn`t work . Is the Logo stucked or is a hard reset . On ICS i could enter in CWM recovery mode , but now with the JB i cannot . And i cannot flash again the JB because my download mode doesn`t work.
PS : i tried a bootloader recovery / other cwm recovery from another L5 with v20c but it doesn`t work either.
Any ideas how i can solve this?
Thanks.
Click to expand...
Click to collapse
did you try just volume up + volume down and usb cable (without power button) to enter download mode?

yes, i tried this too, it`s just the logo for a few time and after it boot normally

Sabyn said:
yes, i tried this too, it`s just the logo for a few time and after it boot normally
Click to expand...
Click to collapse
maybe you should try this http://forum.xda-developers.com/showthread.php?p=41169300&highlight=download+mode#post41169300

Does anyone know the location of the boot parition ?
I remembered I tried to flash back to ICS using an ICS .kdz and got an error during flashing . At first I thought nothing was actually flashed on the device , but I think the bootloader might have been damaged in some way .
I've managed to decompile the JB .kdz , get the stock boot.img , emmc_appsboot.bin and recovery.img . Flashed the last 2 but I keep getting the same problem (allthough recovery now acts as a full hard reset as it should , graphics display well and all) and I'm still unable to enter download mode . So I guess I should also try replacing the boot.img , but unfortunately I don't know where it's located on the device .
Does anyone know where it is ? Or does anyone have a full partition table with the location of the /boot partition ? I've tried getting it myself but no luck .

Or if anyone had this problem with bootloader for recovery and download mode pls tell me how you fixed it.

Solved the Emergency Mode on lg-e610
Sabyn said:
Or if anyone had this problem with bootloader for recovery and download mode pls tell me how you fixed it.
Click to expand...
Click to collapse
I solved the issue by simply changing to lg-software mode when I plugged in the device in windows. After 1 minute the LG is in download mode and the KDZ runs through the update process smoothly
The phone is connected when the software modus is activated
worked 2 hours on this phone and and now Jelly bean 4.1.2. is running
Helpfully links:
Bootloader
http://www.lg-phones.org/unlock-bootloader-on-lg-optimus-l5-e610e612e615.html
Jelly Bean Version
http://forum.xda-developers.com/showthread.php?t=2232123
Thanks a lot for your great work here at this website!

I resolved the problems, i couldn`t enter in download mode because of the port of pc, but after i got DM and reflashed JB 4.1.2 and now it works. Atm i have CM10 which is very usefull, and thanks you for advice.

yudhajitn said:
the phone is a piece of plastic it can't enter cwm nor does it do anything when I try to flash stock firmware using kdz..
thanks for any help,thanked
ps, you have an e610 as well?
were you able to reboot recovery?
Click to expand...
Click to collapse
i have got only root i havent installed cwm

Sabyn said:
I resolved the problems, i couldn`t enter in download mode because of the port of pc, but after i got DM and reflashed JB 4.1.2 and now it works. Atm i have CM10 which is very usefull, and thanks you for advice.
Click to expand...
Click to collapse
I think I have the same problem you did. My LG e610 got bricked after flashing a new rom. Now it gets stuck at the LG logo. Can not boot into recovery and also can not boot Android. I was hoping to be able to flash a stock firmware using LG Flash Tool 2014 but I cannot seem to be able to enter in download mode. In LG Flash Tool 2014, when I press "read phone information" I get an error message saying "Port(USB or Serial) not found". How did you sort out the PC port problem?

patsim said:
I think I have the same problem you did. My LG e610 got bricked after flashing a new rom. Now it gets stuck at the LG logo. Can not boot into recovery and also can not boot Android. I was hoping to be able to flash a stock firmware using LG Flash Tool 2014 but I cannot seem to be able to enter in download mode. In LG Flash Tool 2014, when I press "read phone information" I get an error message saying "Port(USB or Serial) not found". How did you sort out the PC port problem?
Click to expand...
Click to collapse
Just changed the USB port. I have 3 on my laptop, so I chose to use another one. Sound stupid but is worked

I have the same problem, but mine goes on, it only stays in the LOGO LG and I do not work either the RECOVERY (TWRT) or the Download mode, but when using (Volume - and connect the charger to the pc, the device Connects, but in LG does not come download mode if the loading icon does not come out.
You can help me, please, I would appreciate it.
LG E617G/15G/12G
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have managed to boot into recovery by doing the following:
1)remove and reinsert battery
2)pressing volume down + home button + power button until phone vibrates
3)as soon as phone vibrates on previous step, release power button (keep pressing vol down + power buttons for about 8 seconds) and you should be booting in recovery now.
Hope this helps

Reboot stuck after Odin of stock ROM

I tried out CM12 for my Sprint S4 (L720). I was able to root it, but never able to install TWRP and make a Nandroid. I then decided to Odin (V3.09) back to stock with the file 720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5. Odin completed with the PASS message displayed. Upon reboot, it got stuck at the words 'SAMSUNG' after playing a musical note. I've tried Odin several time and each time it Passes, but with the same stuck on reboot symptom. Any hints on how to resolve would be appreciated.
As an aside, I've also tried to Odin TWRP several times thinking I could restore a prior stock Nandroid if I could get into TWRP recovery. Again, Odin displayed PASS, but phone cannot enter recovery. It just goes back to the stuck reboot when pressing the enter recovery buttons.

flroots said:
I tried out CM12 for my Sprint S4 (L720). I was able to root it, but never able to install TWRP and make a Nandroid. I then decided to Odin (V3.09) back to stock with the file 720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5. Odin completed with the PASS message displayed. Upon reboot, it got stuck at the words 'SAMSUNG' after playing a musical note. I've tried Odin several time and each time it Passes, but with the same stuck on reboot symptom. Any hints on how to resolve would be appreciated.
As an aside, I've also tried to Odin TWRP several times thinking I could restore a prior stock Nandroid if I could get into TWRP recovery. Again, Odin displayed PASS, but phone cannot enter recovery. It just goes back to the stuck reboot when pressing the enter recovery buttons.
Click to expand...
Click to collapse
You have to wipe your internal SD after installing a Lollipop ROM. Go back into Download Mode and install TWRP again, this time make sure Auto Reboot is not checked. After it says PASS, disconnect the phone from PC and remove the battery. Replace the battery and hold Power and Volume Up until it goes into recovery. Wipe the Internal SD, system, data, cache, and dalvik cache and flash your ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

bilgerryan said:
You have to wipe your internal SD after installing a Lollipop ROM. Go back into Download Mode and install TWRP again, this time make sure Auto Reboot is not checked. After it says PASS, disconnect the phone from PC and remove the battery. Replace the battery and hold Power and Volume Up until it goes into recovery. Wipe the Internal SD, system, data, cache, and dalvik cache and flash your ROM.
Click to expand...
Click to collapse
Thanks. I did exactly as you said, but following the Odin of TWRP it just goes into stuck boot mode instead of TWRP recovery. It says PASS each time. I was sure to uncheck Auto Reboot and I also removed the battery the instant PASS was displayed. Any more ideas greatly appreciated. I seems amazing that it says PASS, but nothing changes?

flroots said:
Thanks. I did exactly as you said, but following the Odin of TWRP it just goes into stuck boot mode instead of TWRP recovery. It says PASS each time. I was sure to uncheck Auto Reboot and I also removed the battery the instant PASS was displayed. Any more ideas greatly appreciated.
Click to expand...
Click to collapse
It's not supposed to boot, when you turn the phone on hold Power and Vol Up until you see Recovery Booting in blue at the top of the screen and then release. Just like booting into Download Mode but you hold Volume Up instead.

bilgerryan said:
It's not supposed to boot, when you turn the phone on hold Power and Vol Up until you see Recovery Booting in blue at the top of the screen and then release. Just like booting into Download Mode but you hold Volume Up instead.
Click to expand...
Click to collapse
Thanks again. Yes, I follow your instructions, but it goes into stuck boot instead of recovery when pushing the correct buttons. I've used the buttons to go into recovery previously so don't think I'm getting that part wrong. As you say, it's just like going into Downloader mode except you use VolUp instead of VolDn.

SM-G900F wont flash Recovery?

I recently sent my 900F back as it was having some overheating issue. They sent me a new S5, also a 900F with a CSC for the UAE.
I have tried to flash Philz recovery (nothing I have donent a dozen times before on my previous S5), but with no luck apparently. ODIN says the flash works fine, but when I reboot into recovery, the stock recovery is still there.
Is the BL locked? or am I missing something?
Thanks for any info, ideas, suggestions
K

OK guys, disregard...
On my I tried flashing another version of Philz, and that worked. Not sure what is was having an issue with, but its good now.

do not let the phone reboot after odin finish, disconnect immediately and manually go into recovery by holding down power,home and volume up at the sametime

Update 2: Use this thread and TWRP and everything is fine http://forum.xda-developers.com/showthread.php?t=2697762
Update: If you dont reboot after flashing, you can go into philz recovery. Disable "auto-reboot" in ODIN. When flashed successfully (PASSED): hold power, home, volume up until it boots into recovery.
--------------------
I wrote the following text before I noticed this thread. It seems to be the same problem. Where do I get another recovery file from?
--------------------
Hey Guys,
i tried to flash philz_touch_6.26.2-klte.tar following this guide: how-to-root-galaxy-s5
I went through all steps succesfully and also odin3 v1.85 told me, that the recovery was successfull installed (See photo). Unfortunately when trying to boot into recovery philzs recovery is not present, but "Android System recovery" instead. I tried to flash the recovery twice. Both tries showed "PASSED" in ODIN.
I dont know what exactly went wrong. I assume that their is a problem to boot into philzs recovery cause i get a short popup inbetween "Loading recovery" and "Android System recovery" which says: "Kein Befehl" (engl. No command).
I would be very pleased if you could tell me what i can try else.
Thank you very much for your support.
mellhen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@mellhen.......
Assuming you are trying to root the F variant, this method will work......
....Follow exactly....
1) deactivate 'Reactivation Lock' (can be found under Security in Settings).
2) copy SuperSU zip to your device.
3) boot into download mode. (Vol -, Power & Home button combination)
4) Odin flash TWRP 2.8.7.0 (specifically this version).
5) DO NOT allow phone to boot, (uncheck auto reboot in odin and if necessary remove the battery as soon as the TWRP flash has completed) then.....
6) boot directly into recovery. (Vol +, Power & Home button combination)
7) flash SuperSU zip.
8) boot device as normal.
Odin v3.10.7....
https://www.androidfilehost.com/?fid=24338798368260130
TWRP 2.8.7.0 by Dees_Troy
http://forum.xda-developers.com/showthread.php?t=2727406
superSU zip v2.46 by Chainfire
http://forum.xda-developers.com/showthread.php?t=1538053
http://i.imgur.com/rVnFwJM.jpg

Galaxy Note 3 N9005 Bootloop, Cant get in recovery Mode nor Download Mode

Dear friends,
I have me problem today, i found my note 3 N9005 keep bootloop.
I was thought because i just change the recovery from philz to TWRP, so i try to enter both Recover Mode and Download Mode without any success.
* My phone keep boot loop (when i re insert the battery, it automatically on and shown Samsung Galaxy Note 3 SM-N9005 logo and suddenly down)
* I am trying to get into recovery Mode, but no work (shown only recovery booting... with Samsung Galaxy Note 3 SM-N9005 logo and suddenly down)
* I am trying to get into download mode, and when i press Continue, and the menu appear, it suddenly shut down.
i have no idea what to and kindly your help.
thanks
Chou

Reads as you have flashed the wrong recovery not your model .

Solve
i have manage to make it On again
here what i did :
1. take off your battery
2. Open the case of your phone and open all the screw then take off the inside case ( i really mean it)
3. connect an usb cable
4. press volume down plus home button the insert the battery,,,it will goes to download mode (now you can flash your recovery preferable Philz and the phone will reboot )
5. Phone back to live
the problem is the power button is broken, thats make your phone boot loop and cant enter Download mode...
when you can make it On, you cant make it off..so you have to install Reboot apps

I have almost the same problem with my Samsung Galaxy note 3 N9005. It is on bootloop. I can enter in download mode. I have instaled official rom for this model, but the phone enter in recovery boot loop and is restarting itselff
I dissasembly the note 3, i have clean it up, but the problem remains. I cant enter into recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

My power buton is ok, and icould enter to download mode, I flashed official rom but it enter in bootloop in recovery

Are you sure its the correct firmware .
What else have you been flashing ??
You may be flashing older firmware over newer bootloader .

i have tried to flash 10 different stock roms with Lollipop, and 3 roms with KK, but it still not booting up. I suspect that the motherboard has a hard issue, who makes to enter in bootloop but it doesn.t enter on bootloo if i enter in download mode. Is so weird

Try flashing a TWRP recovery tar via Odin and see if it boots .

I have tried allready. It boots the same way, except it shows me: Set waranty bit: recovery, but it enters still in bootloop.

T290 bricked after lock bootloader [SOLVED]

Hi,
I'm new on Samsung devices modding, and I would like to know if is possible to unbrick my Samsung Galaxy Tab A8 2019 T290, below are the steps I made to current status:
1- Unlocked bootloader apparently (OEM LOCK = OFF)
2- Tried to flash LineageOS recovery
3- Bootloop, then after few reboots system started without issues.
4- Locked bootloader after enter in samsung download mode, long press up, and then confirm to lock bootloader.
5- After reboot, just boot directly to download mode, without possibility to enter to recovery
6- Flashed stock ROM to try to revert any change made, but still boots to download mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help will be appreciated.
Thanks!

Meloferz said:
Hi,
I'm new on Samsung devices modding, and I would like to know if is possible to unbrick my Samsung Galaxy Tab A8 2019 T290, below are the steps I made to current status:
1- Unlocked bootloader apparently (OEM LOCK = OFF)
2- Tried to flash LineageOS recovery
3- Bootloop, then after few reboots system started without issues.
4- Locked bootloader after enter in samsung download mode, long press up, and then confirm to lock bootloader.
5- After reboot, just boot directly to download mode, without possibility to enter to recovery
6- Flashed stock ROM to try to revert any change made, but still boots to download mode.
View attachment 5917505
Any help will be appreciated.
Thanks!
Click to expand...
Click to collapse
Did you flashed it using Odin?

mvikrant97 said:
Did you flashed it using Odin?
Click to expand...
Click to collapse
yes, i flashed with Odin, but not success.
Steps I made for installing stock ROM:
1- Download the firmware specific for my tablet T290
2- Extracted files
3- With Odin, I checked:
3.1- AP with its file
3.2- BL with its file
3.3- CP with its file
3.4- CS with HOME CS file
4- In Options settings, was checked auto reboot and f. reset time

I'm stuck in the same situation, only difference is, I've still got the older T290_DBT_T290XXU3CVG3_fac firmware installed. Does anybody know the meaning of the error message?:
"/!\
partition boot
Reason VBMETA T290XXU3CVG3, 54214101R
Click to expand...
Click to collapse

yogibaaeer said:
I'm stuck in the same situation, only difference is, I've still got the older T290_DBT_T290XXU3CVG3_fac firmware installed. Does anybody know the meaning of the error message?:
Click to expand...
Click to collapse
Seems that there is no easy solution, I'm considering buying a new motherboard from ebay, found it for 10 bucks, seems not very hard to change the motherboard

Actually, the solution is quite simple, at least in my case:
flash stock rom with odin (auto reboot off)
after stock rom flash, reboot from download mode with vol down & power btn, usb still plugged in
immediately after screen turns dark, release power btn and press vol up and vol down
download mode/unlock bootloader menu will appear
continue with unlocking bl (long press vol up)
confirm prompt of factory reset
tablet will automatically reboot and perform factory reset and restart again
stock rom boots after this.

Still wondering about the meaning of the aforementioned "reason vbmeta" error message though.

yogibaaeer said:
Actually, the solution is quite simple, at least in my case:
flash stock rom with odin (auto reboot off)
after stock rom flash, reboot from download mode with vol down & power btn, usb still plugged in
immediately after screen turns dark, release power btn and press vol up and vol down
download mode/unlock bootloader menu will appear
continue with unlocking bl (long press vol up)
confirm prompt of factory reset
tablet will automatically reboot and perform factory reset and restart again
stock rom boots after this.
Click to expand...
Click to collapse
Thanks! Worked perfectly!