Q&A for [INDEX][AIO][Rooting,Guides,Recoveries,Roms]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Is installing a custom rom remove/improve problems in xolo q700
Well I have been using my q700 for 1 year and exactly just after 1 year (after the warranty peroid is over) the mobile has been having many problems mostly hardware related. Just like the other mobiles out there its having the misbehaving touchscreen problem and the capacitive buttons have gone dead( havent had the swollen battery issue). I highly suspect this to be more like a software issue thats been generated by xolo after a particular period of usage of the handset. Or I may be wrong but every user have been starting to have this problems after 10-11 months of usage.
and I have not used my mobile much except for few phone calls (its my secondary cell). So my question is whether it is possible to inject such problems by above mentioned method and now can I use any custom rom that will remove such problems? Or is it just a hardware issue that everyone faces?
titanx8888 said:
Well I have been using my q700 for 1 year and exactly just after 1 year (after the warranty peroid is over) the mobile has been having many problems mostly hardware related. Just like the other mobiles out there its having the misbehaving touchscreen problem and the capacitive buttons have gone dead( havent had the swollen battery issue). I highly suspect this to be more like a software issue thats been generated by xolo after a particular period of usage of the handset. Or I may be wrong but every user have been starting to have this problems after 10-11 months of usage.
and I have not used my mobile much except for few phone calls (its my secondary cell). So my question is whether it is possible to inject such problems by above mentioned method and now can I use any custom rom that will remove such problems? Or is it just a hardware issue that everyone faces?
Click to expand...
Click to collapse
flashed baidu rom today eve; and i jst love it .. jst one issue.. while on call the volume is very low; i tried acessing mode as per xolo q700 ; bt it didnt worked... can u pls do smthng abt this .... kicakss rom tough ..... grt job:good::good:
android 4.4.2 kitkat from modded from from cyanogen mod 10.1
I m using a custom rom called project doge in my xolo q 700 since more than 4 months. It is cyanogenmod 10.1 working flawlessly.
Following r the details
Model no: Nexus 4
Android version : 4.4.2
Build no: DogeMod_v1
Developed by: back37 bgos10
other detail
shows kit kat logo
Sony walkman player installed with viper4android
xposed installer with gravity box, busy box, Xuimod
prerooted
ps: I have tried almost all the roms listed here by far i felt this as the best, without any glitch with butter smooth experience
i hav uploaded the screen shots here have a look
Flashing rom
I have a xolo q700i and I rooted it and installed cwm according to or instructions ..... I wanted somebody to tell me if the internal memory of the phone will be wiped if I flash any ROM with cwm ..... Thank u .....
recovery update not found (even after turn off wifi/mobile data)
i m new here, plz help, while using mobile uncle tools--> recovery update ---> ??
i can't find my xolo q700 recovery.img from several recovery.img( in wifi mode)
and also it shows nothing while i disconected from wifi ( no recovery.img file )
what to do ? reply soon
owner of this thread n all other user who owns xolo q700, may this will helpful to u
ROOTING, FLASHING NEW ROM, UPGRADING FIRMWARE, FLASHING RECOVERY FOR THE XOLO Q700 :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
THE THINGS n PROCEDURES THAT ARE EXPLAINED HERE ONLY RELATED TO (MTK 6789 DEVICE) XOLO Q700 , I
DON'T SURE ABOUT OTHER DEVICE ( SO CAREFULLY TAKE THE DECISION):
Remember FOR PLAYING TRICKS WITH UR DEVICE IS NOT A FUNNY THING AT ALL, IF U HAVE PASSION FOR IT, OR U
HAVE TO EXPERIMENT WITH UR DEVICE, THEN N THEN ONLY DO THIS ALL STUFFS.
CONS : UR DEVICE CAN POSSIBLE OF GETTING BRICKED.
UR DEVICE WARRANTY IS NO MORE VALID AFTER ROOTING IT.
I AM NOT RESPONSIBLE FOR BRICKING OF UR DEVICE, IS BECAUSE MAY BE ON UR DEVICE, ON UR PC, SETTINGS
ARE NOT ALL THE SAME AS WITH MINE.
SO THERE ARE SO MANY CHANCES THAT U GOT LOST.
I TRIED TO EXPLAIN AS MUCH AS I CAN.
IF U FIND THAT THERE IS SOMETHING MISSING OR CAN'T ABLE TO UNDERSTAND THE PROCESS, THEN U SHOULD
GOOGLE UR PROBLEM FIRST.
HAVE BACKUP OF ALL NECESSARY STUFFS (CURRENT ROM , SCATTER FILE, IMEI) IS THE ONLY ADVICE I AM
GIVING TO U. HAVE FUN.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ROOTING :
USE KINGROOT.APK TO INSTALL QUICKLY
U CAN ALSO USE FRAMAROOT.APK FOR ROOTING IF THE FIRST OPTION NOT DONE SUCCESSFULLY.
OR MANUALLY ROOT Q700 VIA PC ( SEARCH IT ON YOUTUBE U WILL GET PERFECT VIDEO FOR THIS,NO WORRY AT
ALL)
u can also root it via mtkdroidtools.exe via pc.
------------------------------------------------------------------------------------------------------------------------------------------------
FLASHING CWM RECOVERY ON xolo q700 :
U NEED ;
download mobile uncle tools.apk from play store,
download cwm recovery for xolo q700 files . . .
_________________________________
put downloaded CWM RECOVERY.IMG FILE into sd card's root folder. ..
(main recovery.img file should be mandatory to be in root folder of sd card for detected by mobile uncle tools.)
after downloading, open mobile uncle, go to recovery update --> where will u find the recovery.img file from your sd card. .
.install it.
and your xolo q700 device is flashed with cwm recovery successfully.
--------------------------------------------------------------------------------------------------------------------------------------------------------
FOR UPGRADING XOLO Q700 DEVICE'S FIRMWARE TO XOLO Q700i'S FIRMWARE ::
u need;
vcom mtk 6589 drivers
mtkdroid tools.apk
sp tools.exe (use latest one, or go for version that is best suited for this device. i used is the version 3.1316.0.150)
q700i firmware
___________________________________________
make sure you logged into win 8.1/WIN 8 with "disable certificate force check" mode . .
( u will find it in "change pc setting", under "recovery and update" ---> "startup option " --> advance startup
reboot and select 7 no. for disabling the force check of certification . . .( mandatory)
pc will reboot.
then install vcom driver for mtk 6589 device manually ( mandatory)
manual process : go to my computer --> right click "manage" --> go to "device manager" --> select the main root node--> and
right click --> select add legacy driver/device --> next next --> select the drive : locate the vcom driver folder in that go to win 7
folder ---> in that select file as per ur pc bit format --> next next --> select "install it anyway " --> next next -->finish
damn u manually installed the drivers.
NOTE :
IF there is more entry of drivers installation for the same mtk device. then first remove all the signs of previous installed drivers
by "usbdeview.exe" (google it if u don't understand the whole use of usbdeview.exe)
OPEN SP TOOLS
CLICK ON SCATTER LOADING --> SELECT THE MTK FILE FROM THE DOWNLOADED FIRMWARE OF Q700i
(DON'T CONNECT DEVICE DURING THIS TIME WITH PC)
THEN
REMOVE BATTERY, SIM, MEMORY CARD FROM XOLO Q700
THEN IN PC CHCK THE DL/DS CHECKSUM CHECKBOX
CLICK THE FIRMWARE-->UPGRADE BUTTON.
CONNECT UR PHONE WITH INSTALLING ONLY BATTERY WITH IT. DON'T SWITH ON IT. JUST PLUG IN WITH PC
USING DATA CABLE
THERE U GO SP TOOLS WILL FIND UR DEVICE N WILL START THE PROCESS OF UPGRADING THE FIRMWARE
BA
WAIT TILL THERE WILL BE A DIALOGUE BOX WITH GREEN CIRCLE APPEAR.
THAT SHOWS UR PROCEDURE SUCCESSFULLY FINISHED.
ENJOY THEN.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
FLASHING THE NEW ROM ON XOLO Q700 :
THIS IS NOT AT ALL BIG DEAL
U need;
-mtkdroidtools.exe
-mobileuncle.apk
-the desired rom's zip file in ur device's sd card in root folder (the top most one)
-ur device should have root permission and the recovery should be there..
REMEMBER FOR FLASHING ANY ROM U FIRST NEED TO ROOT UR DEVICE, 2ND IS THAT U HAVE TO UPGRADE THE
FIRMWARE OF Q700 TO Q700i'S FIRMWARE.
RECOMMENDED IS THAT : U SHOULD FLASH ANY RECOVERY BEFORE DOING FLASHING ANYTHING ON UR DEVICE,
AND ALSO BACKUP OF UR CURRENT ROM WITH "MTKDROIDTOOLS.EXE" SO IF ANY DISASTER HAPPEN WITH UR
DEVICE THIS WILL BE HELPFUL.
DON'T FORGET TO HAVE BACKUP OF UR IMEI AS WELL (BY USING MOBILEUNCLE.APK IS GOOD OPTION)
THIS IS SURELY NEEDED. SO HAVE BACKUP OF IT.
THEN ONLY U ARE ABLE TO FLASH ANY ROM.
THERE ARE TOO OPTION (there can be other options, but what i know is this only)
USE ROM MANAGER (BUT THIS WILL ONLY BE USEFUL IF U HAVE A PRIMEUM ROM MANAGER.APK)
2ND OPTION :
reboot ur device in recovery mode ( simple as hell, just switch off ur device, then press power button + volume up key
simultaneously . . . wait for a sec.
u will get recovery window.
select wipe data --> wipe all data --> yes
select wipe cache --> wipe cache --> yes
select zip from sd card --> select the desired zip file of other rom -->and there u go -- > process will start in some second. wait
till then.
after take neccessary steps as per ur requirement. and ur process of flashing new rom is successfully done.
after flashing new rom, restore ur imei's n all other necessory things.
may this help u guys. have a great day.
enjoy.
Xolo Q700 Flash Tools HELP!!!! phone almost bricked
Hi Everyone
I have flashed Xperia Z2 rom on and it was stuck on boot loop and had to format the phone using SP Falsh Tools, unfortunately i dont have backup of my phone and I am trying to flash stock rom downloaded from needrom.com but was highly unscuccessful as there are a lot of problems with the Scatter file and checksum file , now i am really left with a totally empty phone please help me !!
---------- Post added at 02:52 AM ---------- Previous post was at 02:47 AM ----------
dileep.betha said:
Hi Everyone
I have flashed Xperia Z2 rom on and it was stuck on boot loop and had to format the phone using SP Falsh Tools, unfortunately i dont have backup of my phone and I am trying to flash stock rom downloaded from needrom.com but was highly unscuccessful as there are a lot of problems with the Scatter file and checksum file , now i am really left with a totally empty phone please help me !!
Click to expand...
Click to collapse
If anyone knows how to revive this phone from a complete format please direct me to there or just help me with the flash files and the procedure, it would be really helpful :crying:
question
hi, m in xolo q700i now with xolo Q700, some user app icon showing shadow. any solution
Related
i stareted with a purpose of installing cynogenmod on my phone so i cud use all th gr8 features & stuff & also keepmaking regular nandroid backups n stuff.
however, i struggled hard only to get a method to flash "InDroid 4.1 CWM" to my phone using ODIN METHOD which has set my default phone version to froyo. good.
now frm within rom manger i gave th install from SD card option & th phone restarts with a little yelloy triangle with an colon sign ...i dont knw wat it is ...probably its doading cyanagenmod from th sdcard..but its been like 1 hour..its not stopping.
moreover i dnt know if this method is gonna work
im goin to sleep & shall chek my mobile tomo if its ready for cyanagenmod,
nyways , kindly if u hav any better n full proof methods for me , plz infrom..
also suggest me which other samsung mobiles(name plz) "clockworkmod recovery" will work for galalxy 3 & give me the link or details
also explain me method using adb from pc ,in cse my mobile stops booting all togethe..
thanks all you gr8 intellectuals..pz help
i have recently flashed Indroid clockworkmod on my galaxy 3 not starting after th boot animation
i instInDroid 4.1 CWM Clean
vishalsignap said:
i stareted with a purpose of installing cynogenmod on my phone so i cud use all th gr8 features & stuff & also keepmaking regular nandroid backups n stuff.
However, i struggled hard only to get a method to flash "indroid 4.1 cwm" to my phone using odin method which has set my default phone version to froyo. Good.
Now frm within rom manger i gave th install from sd card option & th phone restarts with a little yelloy triangle with an colon sign ...i dont knw wat it is ...probably its doading cyanagenmod from th sdcard..but its been like 1 hour..its not stopping.
Moreover i dnt know if this method is gonna work
im goin to sleep & shall chek my mobile tomo if its ready for cyanagenmod,
nyways , kindly if u hav any better n full proof methods for me , plz infrom..
Also suggest me which other samsung mobiles(name plz) "clockworkmod recovery" will work for galalxy 3 & give me the link or details
also explain me method using adb from pc ,in cse my mobile stops booting all togethe..
Thanks all you gr8 intellectuals..pz help
i have recently flashed indroid clockworkmod on my galaxy 3 not starting after th boot animation
i instindroid 4.1 cwm clean
Click to expand...
Click to collapse
hey ... At first improve your basics of flashing a rom.. There are guides available for it. U shud know how to enter dwnload mode(vol down+home key+power)..so heres what u do:
1.. Download odin and ops file of 5801/5800
2.. Clik one pkg tar.
3.. Select the downloaded cyanogen mod rom tar.(put in one pkg).
4.. Start..
5.. After rebooting, open odin again, now
6.. Flash g3mod kernel1.9 for cyanogen(same method as flashing rom from odin) g3mod has cwm in it (dont use rom mnger as it not support 15800/5801)
vishalsignap said:
i stareted with a purpose of installing cynogenmod on my phone so i cud use all th gr8 features & stuff & also keepmaking regular nandroid backups n stuff.
However, i struggled hard only to get a method to flash "indroid 4.1 cwm" to my phone using odin method which has set my default phone version to froyo. Good.
Now frm within rom manger i gave th install from sd card option & th phone restarts with a little yelloy triangle with an colon sign ...i dont knw wat it is ...probably its doading cyanagenmod from th sdcard..but its been like 1 hour..its not stopping.
Moreover i dnt know if this method is gonna work
im goin to sleep & shall chek my mobile tomo if its ready for cyanagenmod,
nyways , kindly if u hav any better n full proof methods for me , plz infrom..
Also suggest me which other samsung mobiles(name plz) "clockworkmod recovery" will work for galalxy 3 & give me the link or details
also explain me method using adb from pc ,in cse my mobile stops booting all togethe..
Thanks all you gr8 intellectuals..pz help
i have recently flashed indroid clockworkmod on my galaxy 3 not starting after th boot animation
i instindroid 4.1 cwm clean
Click to expand...
Click to collapse
hey ... At first improve your basics of flashing a rom.. There are guides available for it. U shud know how to enter dwnload mode(vol down+home key+power)..so heres what u do:
1.. Download odin and ops file of 5801/5800
2.. Clik one pkg tar.
3.. Select the downloaded cyanogen mod rom tar.(put in one pkg).
4.. Start..
5.. After rebooting, open odin again, now...
6.. Flash g3mod kernel1.9 for cyanogen(same method as flashing rom from odin) g3mod has cwm in it (dont use rom mnger as it not support 15800/5801)
and when you get that triangle with android logo press the options button (next to home)
hi guys i just revived my phone thanks to some help from the BLU GOOLE+ comunity
https://plus.google.com/communities/117846429749085694805
rigth so this is my first tutorial KIND since im using some compilation form other tutos!
ROM BLU_D980l_V11_GENERIC
https://mega.co.nz/#!qcY0FaQS!zXLo-MuVQY7AwxQpDIZkqU3cIyLY5D5sk0xNQ4_K_is
donwload and extract
then follow this steps
If you have any drivers installed for your BLU device uninstall them before seeing step 1.
1. turn off your PC, and turn it on pressing F8 constantly until you get a black & white menu to select "Disable driver signature enforcement"
2. Download & install BLU drivers (http://bit.ly/1GZSNV6)
3. Download & open flash_tool (http://bit.ly/1IJrTCR)
4. click scatter-loading then select the scatter file inside the ROM you downloaded (must be unzipped of course)
5. Change "Download" to "Firmware upgrade" (under scatter-loading file)
6. click download
7. take battery out of your phone and insert it again. make sure your phone does not turn on. (if phone has an internal battery then just make sure the phone is off)
8. plug in your phone to your PC
9. the green check mark means you're good to go.
enjoy
AND DONT PUSH OTA UPDATES WITH A ROOTED PHONE
jjvalor59 said:
hi guys i just revived my phone thanks to some help from the BLU GOOLE+ comunity
https://plus.google.com/communities/117846429749085694805
rigth so this is my first tutorial KIND since im using some compilation form other tutos!
ROM BLU_D980l_V11_GENERIC
https://mega.co.nz/#!qcY0FaQS!zXLo-MuVQY7AwxQpDIZkqU3cIyLY5D5sk0xNQ4_K_is
donwload and extract
then follow this steps
If you have any drivers installed for your BLU device uninstall them before seeing step 1.
1. turn off your PC, and turn it on pressing F8 constantly until you get a black & white menu to select "Disable driver signature enforcement"
2. Download & install BLU drivers (http://bit.ly/1GZSNV6)
3. Download & open flash_tool (http://bit.ly/1IJrTCR)
4. click scatter-loading then select the scatter file inside the ROM you downloaded (must be unzipped of course)
5. Change "Download" to "Firmware upgrade" (under scatter-loading file)
6. click download
7. take battery out of your phone and insert it again. make sure your phone does not turn on. (if phone has an internal battery then just make sure the phone is off)
8. plug in your phone to your PC
9. the green check mark means you're good to go.
enjoy
AND DONT PUSH OTA UPDATES WITH A ROOTED PHONE
Click to expand...
Click to collapse
Yes. Please don't I learned the hardware
Fantastic writeup!
Sent from my Z970 using XDA Free mobile app
bmxerkid954 said:
Yes. Please don't I learned the hardware
Fantastic writeup!
Sent from my Z970 using XDA Free mobile app
Click to expand...
Click to collapse
hello,can you send new link for the rom please,it s not anymore available,thanks
How to Flash Stock Firmware On your Blu Vivo Air
Hi Guys Today I'm gonna show you how to unbrick or flash stock rom
the drivers are same for all and procedure as well
here is video : https://www.youtube.com/watch?v=6T_YEXhW2qg
on your (fly tornado Kazam/Fly IQ4516 Tornado Slim/Gionee Elif S5.1 & Qmobile Noir Z7) & Blu Vivo Air
THESE 4 DEVICES are same and can be flashed with this official Firmware.
1)Download usb drivers for your device : http://www11.zippyshare.com/v/49JiXYy2/file.html
2)Download Sp Flashtool : http://www.needrom.com/wp-content/uploads/2014/06/SP_Flash_Tool_v5.1408.00.rar
3}Download Official Firmwares For
Blu Vivo Air : https://mega.co.nz/#!pwkSwSQb!SKa09MUl7enJjuj3YQa3Ay9E97DwryhbUiO-ux8QXb0
Fly Tornado Kazam : http://www.needrom.com/wp-content/uploads/2014/12/SW08_KAZAM_Tornado_348_2014_11_20.zip
Gionee Elif S5.1 : http://www.androot.org/gionee-stock-rom/gionee-s5-1-official-firmware.html
Fly IQ4516 Tornado Slim : https://cloud.mail.ru/public/d288ccc05db4/Fly_IQ4516_SW08.zip
4)Install Drivers.
5)Open Sp Flashtool as Administrator.
6)In upper Left Hand corner select options then option click on download and select check on "DA DL Allwith Checksum"
7)Select Scatter file from firmware folder and hit download (be carefull dont connect your device before clicking download)
8)Now turn off your device and volume down and connect your device throw usb cable Flashing should start.
9)After successfully Flashing disconnect your device and boot with power key that all.
IF THIS TUTORIAL IS HELP FULL THEN PLEASE SUBSCRIBE LIKE AND SHARE MY VIDEO THENKYOU.
coolsongs95 said:
Hi Guys Today I'm gonna show you how to unbrick or flash stock rom
the drivers are same for all and procedure as well
here is video : https://www.youtube.com/watch?v=6T_YEXhW2qg
on your (fly tornado Kazam/Fly IQ4516 Tornado Slim/Gionee Elif S5.1 & Qmobile Noir Z7) & Blu Vivo Air
THESE 4 DEVICES are same and can be flashed with this official Firmware.
1)Download usb drivers for your device : http://www11.zippyshare.com/v/49JiXYy2/file.html
2)Download Sp Flashtool : http://www.needrom.com/wp-content/uploads/2014/06/SP_Flash_Tool_v5.1408.00.rar
3}Download Official Firmwares For
Blu Vivo Air : https://mega.co.nz/#!pwkSwSQb!SKa09MUl7enJjuj3YQa3Ay9E97DwryhbUiO-ux8QXb0
Fly Tornado Kazam : http://www.needrom.com/wp-content/uploads/2014/12/SW08_KAZAM_Tornado_348_2014_11_20.zip
Gionee Elif S5.1 : http://www.androot.org/gionee-stock-rom/gionee-s5-1-official-firmware.html
Fly IQ4516 Tornado Slim : https://cloud.mail.ru/public/d288ccc05db4/Fly_IQ4516_SW08.zip
4)Install Drivers.
5)Open Sp Flashtool as Administrator.
6)In upper Left Hand corner select options then option click on download and select check on "DA DL Allwith Checksum"
7)Select Scatter file from firmware folder and hit download (be carefull dont connect your device before clicking download)
8)Now turn off your device and volume down and connect your device throw usb cable Flashing should start.
9)After successfully Flashing disconnect your device and boot with power key that all.
IF THIS TUTORIAL IS HELP FULL THEN PLEASE SUBSCRIBE LIKE AND SHARE MY VIDEO THENKYOU.
Click to expand...
Click to collapse
MAN! the owner of this video flashed the KAZAM STOCK SW on GIONEE ELIFE S5.1?
and THANKS about share the process with video to everyone with problems with this phone can try recuperate that ;D
and thanks too to show us more 1 Rebranded name of this Phone -> Qmobile Noir Z7
and we need try contact ours forums moderators to PUT all this Phones on unique Thread Menu to All people around world can found theirs phones on XDA :highfive:
DvDwx. said:
MAN! the owner of this video flashed the KAZAM STOCK SW on GIONEE ELIFE S5.1?
and THANKS about share the process with video to everyone with problems with this phone can try recuperate that ;D
and thanks too to show us more 1 Rebranded name of this Phone -> Qmobile Noir Z7
and we need try contact ours forums moderators to PUT all this Phones on unique Thread Menu to All people around world can found theirs phones on XDA :highfive:
Click to expand...
Click to collapse
bro actually i'm the owner of the video and aim of this video is to show you guy that you can flash any of these firmwares on your device by the way thanks bro:good:
coolsongs95 said:
bro actually i'm the owner of the video and aim of this video is to show you guy that you can flash any of these firmwares on your device by the way thanks bro:good:
Click to expand...
Click to collapse
thanks to share that INFO! ... i have this doubt at almost one month because russians already do that and inside stock rom the system apps have GIONEE.***.*** on description name...
because you say and show that we now can force the moderators to fuse the BLU Vivo Air and KAZAM Tornado 348 on same MENU.. an include the other names of that same phone and have a lot more developers talking and developing to this phone... :highfive:
Thanks for the wonderful info fellas! Do I need to unroot before flashing with this method? Or if I do factory reset? Does root work for the firmware in the op?
Tia!
jonup said:
Thanks for the wonderful info fellas! Do I need to unroot before flashing with this method? Or if I do factory reset? Does root work for the firmware in the op?
Tia!
Click to expand...
Click to collapse
i don't use the method yet but what i can tell is Unroot your phone by precaution... than use SP flash tool (before the tool flash the new SW/ROM he format everything i think... to not happens the incompatibility with old ROM binaries running on new ROM)
DvDwx. said:
i don't use the method yet but what i can tell is Unroot your phone by precaution... than use SP flash tool (before the tool flash the new SW/ROM he format everything i think... to not happens the incompatibility with old ROM binaries running on new ROM)
Click to expand...
Click to collapse
yes you can flash your devise without unrooting but when you flashing any of these firmwares select (Download Only) don't select
(Formate + Download) because if you select download only then it should be fine it will only flash firmware and restore your devise to fectory settings or if you select formate + download then it will also clear your imei number. i already did the second one cleared imei but how ever i menage to repair my imei i will make a video soon on how to repair your imei because it is little hard to repair on these devises and btw you can flash miui rom on any of these devises
coolsongs95 said:
yes you can flash your devise without unrooting but when you flashing any of these firmwares select (Download Only) don't select
(Formate + Download) because if you select download only then it should be fine it will only flash firmware and restore your devise to fectory settings or if you select formate + download then it will also clear your imei number. i already did the second one cleared imei but how ever i menage to repair my imei i will make a video soon on how to repair your imei because it is little hard to repair on these devises and btw you can flash miui rom on any of these devises
Click to expand...
Click to collapse
Yehp... i already read something about that on 4PDA... about Lost IMEI... and NVRAM Problem too... now what you can tell me about that NVRAM Problem.. what is that? on My "Developer Adventures" on Sony/Qualcomm SoC phones i don't remember about something like that... i really lost about some Developer Configurations on this phone like what we can modify on Kernel Source and what we don't can modify... some binaries can't be touch and compatibility with some ROM sources like AOSPA and similar OS to compile from scratch... CyanogenMOD 11/12/12.1 we need some custom drivers to can work with like Bluetooth, Wifi, GPU... and some modded Default configurations/Binaries from someone already make it work on other phone with Same SoC to we can have it working on our phone...
if you need help to create any Guide or Tutorial please contact me ;D i'm noob about MediaTek SoC Developing but i already have some experience with sony/qualcomm phones(Kernel and ROM from source developing)... i'm in contact with Spanish TeamForce to get some modded defaults from their Custom Kernel like undervolting table... :highfive:
Plz help my s5.1 says android billing error
Robin1812 said:
Plz help my s5.1 says android billing error
Click to expand...
Click to collapse
Pay dem bills man!!! Lol
Na but where is it giving that error?
I have read somewhere that russians have ported a miui rom for gionee s5.1, u guys have tested that miui ?
Robin1812 said:
Plz help my s5.1 says android billing error
Click to expand...
Click to collapse
Try install Lucky Patcher... than see what you can do do about it on youtube...
---
tedulus said:
I have read somewhere that russians have ported a miui rom for gionee s5.1, u guys have tested that miui ?
Click to expand...
Click to collapse
Yehp, Full Working.. is the MiUi v6 5.3.4 ... use Carliv CWM to flash :highfive:
Guys plz tell if i delete google +, hangouts, drive, playbooks, play neesstand what will happen to my phone i have root access
Robin1812 said:
Guys plz tell if i delete google +, hangouts, drive, playbooks, play neesstand what will happen to my phone i have root access
Click to expand...
Click to collapse
The apps will disappear. You won't be able to OTA.
do you have some links for that MIUI ?
Guys... if someone want to share the way you flash the Custom Recovery to me have an idea to create a tutorial explain that and more than one way to do it ;D
--
MiUi Have Update -> 5.5.29 -> LINK | Forum Link
Thanks, you saved my life
Hi Everyone,
I Have a Xolo Q700i. I Wanted To Install (Xolo Q700s)'s Firmware on It as (Xolo Q700s)'s Firmware Version is Kitkat.
If It's Possible, Can You Tell Me How ?
Not possible
why we need to do cwm recovery ?
people n friends, plz help me.
m new here exploring this all rom stuffs. i read all your suggested rom and other things to take care before flashing any rom.
what i dnt understand is that was it is compulsory to do cwm recovery after rooting my xolo q700 for flashing q700i firmware ?
and why is it needed can anybody explain me.
help me for this, after rooting i downloaded cwm_xolo_q700.zip and extracted it to desktop. after scatter loading the proper mtk_****_.txt file, enabled the write memory, and in write memory section i put the rocovery.img with emmc memory setting, i did all steps correctly, then after switching off my phone. i waited for some seconds and then connected it with pc (with battery) and when it shows battery in phone i clicked on "write memory" button.but it didn't searched the device and helped me nothing for flashing that.
dude. plz tell me is i made any mistake at any step. . . small details like checksum and starting .exe as admin can solve the problem or any other suggestion ?
is there any alternate way then plz share it for me. thanks in advance.
iamgovind said:
friends, plz help me.
m new here exploring this all rom stuffs. i read all your suggested rom and other things to take care before flashing any rom.
what i dnt understand is that was it is compulsory to do cwm recovery after rooting my xolo q700 for flashing q700i firmware ?
and why is it needed can anybody explain me.
help me for this, after rooting i downloaded cwm_xolo_q700.zip and extracted it to desktop. after scatter loading the proper mtk_****_.txt file, enabled the write memory, and in write memory section i put the rocovery.img with emmc memory setting, i did all steps correctly, then after switching off my phone. i waited for some seconds and then connected it with pc (with battery) and when it shows battery in phone i clicked on "write memory" button.but it didn't searched the device and helped me nothing for flashing that.
dude. plz tell me is i made any mistake at any step. . . small details like checksum and starting .exe as admin can solve the problem or any other suggestion ?
is there any alternate way then plz share it for me. thanks in advance.
Click to expand...
Click to collapse
Hey! Welcome....
It is not necessary to install CWM Recovry After Rooting. But if u want to install custom roms then u need it. And the mtk file... The thing is check if you have installed drivers. It IS not necessary to INSTALL CWM after Rooting.
thanks
thanks buddy, but still i m confused n scared in flashing even single q700i firmware. . .
don't know y, i read every detail about to flash q700i firmware on q700 for new rom , but i m stucked at even the first phase at SP TOOL FLASH. . . it didn't detecting my phone, i installed Mobistel_Cynus_T1_Drivers_x86.rar (3.03 MB) drivers still no action is there.. . .
suggest me any missing steps if u ever got confusion like me for the first time.
n plz tell me for this all, q700 device needs to be rooted, right ? no matter by any method . . . or there must be compulsory method for this ?
reply soon
karanghoshal said:
Hey! Welcome....
It is not necessary to install CWM Recovry After Rooting. But if u want to install custom roms then u need it. And the mtk file... The thing is check if you have installed drivers. It IS not necessary to INSTALL CWM after Rooting.
Click to expand...
Click to collapse
why sp tools not detecting my xolo q700 device after all the steps followed as the main post suggested in this site ?
iamgovind said:
why sp tools not detecting my xolo q700 device after all the steps followed as the main post suggested in this site ?
Click to expand...
Click to collapse
Drivers not installed properly
This port is made by @vaserbanix so,...ALL thanx go to him,..NOT me !!!
Your warranty is now void!
I'm not responsible for any damages. Do it with your own risk!
U must have:
♣Root
♣cwm
♣working SPflash backup of your stock rom
♣working nandroid backup
♣rom dowloaded from HERE
Procedure:
1 After u make up all your backups,reboot phone in Recovery
2 Go to mount and storage and format data and system
3 Go back and do wipe data and wipe cache
4 Go to install zip from sd card
5 Choose zip from sd card,find S6 for Blade Q.zip
6 If u have Carliv touch recovery follow the on screen comands.If u dont have it for every new step hit the Power button to continue
7 After flashing reboot your device
Bugs:
-Dolby is not working
-Reordering of status bar shortcuts is not posible (except if you use Gravity box)
-If you find more than that,report
edit:
After 2 days of using this rom,phone is not working.If u type new number u cant make a call,u can call only numbers from your phonebook
edit:
Resolved with Ready Contact List from GP
https://play.google.com/store/apps/details?id=com.ready.android&hl=en
edit:
fm radio does not work,..when i launch it phone get frozen
♣If u boot up without your IMEI restore it with MTKdroid tools
♣If u lost your internet conection make a new APN settings for your provider
Enjoy and hit the @vaserbanix thanx button !!!!
THREAD CLOSED on request of OP!
I don't want to be rude but I am starting to get a little annoyed with same questions repeating over and over on all threads so i decided to post some answers here where they could be easily accessed.
1. Q:""Can i flash this Marshmallow/Lollipop/Nougat rom over my stock KitKat?"
A:The answer in most cases is that you cant (except in ED300 CM12.1 Rom but its still preferred that you flash stock Lollipop firmware separately).For those who don't want to waste their time flashing Stock rom there is an alternative flash-able zip could be found here
- http://forum.xda-developers.com/len...itkat-lolipop-firmware-base-switcher-t3249046 - for A6000
- http://forum.xda-developers.com/lenovo-a6000/how-to/firmware-base-switcher-a6000-plus-t3411914 - for A6000 Plus.
2.Q:"Where can i find TWRP recovery for my firmware?"
A:Here you go
- http://forum.xda-developers.com/lenovo-a6000/how-to/twrp-development-wt86518-t3498524 - Lollipop/Marshmallow/Nougat recovery developed by TingyiChen
- https://drive.google.com/drive/folders/0B2xkkOmw_M2NNXlVYnFYZnRIZHc?usp=sharing - made by SevenMaxs
TWRP 2.8.6.1 Is KitKat only compatible recovery
TWRP 2.8.7.7 Is Lollipop only compatible recovery
TWRP 3.0.2.0 Is Lollipop/Marshmallow/Nougat compatible recovery
*I couldn't find official links so i uploaded files to my google drive if any developer has a problem with this he can DM me and i will update the links *
3.Q:"Does this rom support VoLTE?"
A:So long there isnt a rom that supports VoLTE (As far as i know).There is some lib or source code problem with VoLTE (idk i am not a developer).There is a thread about this topic here - http://forum.xda-developers.com/lenovo-a6000/help/lenovo-a6000-plus-volte-support-t3418004 -
4.Q:"Does this rom/kernel support OTG?"
A:No there is not.OTG support is a kernel feature that isnt available for our device.Maybe devharsh1998 is working on this maybe he isnt who knows be patient.
5.Q"Which rom is the best?"
A:Answer for this question is subjective you can always easily try couple of them.I like mshoaib7 ports i am currently on Nexus Experience ROM but i plan on switching to nougat soon.
6.Q"ED300 links aren't working?"
A:ED300 isn't developing for our device anymore and his thread links are not working but you can try some of the files that are on his androidfilehost folder
https://www.androidfilehost.com/?w=files&flid=96089
This isn't tested by me and since the development stopped they are not recommended since bugs can't be fixed anymore.
7.Q"My phone is bricked heeeellllppppp?!?!"
A:If you are stuck on a splash screen/bootlogo
Can you enter recovery by restarting your phone and holding vol+ and vol-.If answer is yes just reflash the rom or try different one.If you cant enter recovery mode but can enter fastboot mod by holding vol - when restarting the device then follow this quide :
https://forum.xda-developers.com/lenovo-a6000/how-to/how-to-bring-phone-to-life-fastboot-t3561070
If your phone is showing only black screen or isnt booting at all you can try QFIL unbricking method
Disclaimer:
Nothing of this is my work all credits go to the developers i am just trying to make it easier for the developers and to try and answer noobier questions that are flooding the development threads.If you think some answers need further explanations or you have some more questions feel free to PM me.Enjoy roms and happy flashing
Click to expand...
Click to collapse
Reserved
8.Q:How to change cache and data to f2fs
A:You need to have a recovery that supports f2fs thats burgexx and tingychan 3.0.3.0 and 3.0.2.0 twrp
Be ware all your data will be wiped!
Step 1: go to wipe format data type yes and wipe all
Step 2: Comeback slide the option "Slide to do factory Reset"
Step 3: Go to Advanced Wipe Section Select all Partitions "Expect SD-Card/External Storage"
Step 4: Wipe them all
Step 5: after wipe is complete select cache "Click on change file system type" and you will find f2fs option there hit it
Step 6: Do same for data that is Select "data " click "Change File System type" hit f2fs
Step 7: Flash Latest Rom & Gapps Reboot enjoy
Thanks to @somnath pal for his short but clear tutorial
Also you need to be sure that rom that you plan on using suports f2fs (dev harsh roms and some of the mshoaib ports)
And also kernel (for now only Phantom-Reborn)
9.Q:My IMEI is lost what should i do??!
A:Follow this guide
https://forum.xda-developers.com/lenovo-a6000/how-to/fix-signal-imei-lenovo-a6000-a6000-via-t3421021
10.Q:How to flash official firmware/rom?
A: Go to this thread,https://forum.xda-developers.com/lenovo-a6000/how-to/lenovo-a6010-plus-stock-rom-t3407963
find ROM for your device download it.Unpack zip transfer system.zip and yourregion.zip (yourregion.zip is optional and if you live in india its probably india.zip) and flash it in TWRP recovery.Go to wipe, swipe to factory reset then go to install and select system.zip ,swipe to install it then select yourregion.zip and swipe again,reboot.If you are having problems with TWRP flash stock recovery via fastboot or flashify etc..
Thanks for this thread but there are still a lot of noobs asking for volte
Hi, phone water damaged 2 days ago..
I tried and saved it. But now Camera and flash not working.
Whenever I open camera it says "stopped working".
Is there still water inside out? Camera?
What I can do?? I tried clean flashing latest RR ROM.
But it says the same thing.
Anything hardware related repair can be done from home?
How much it will cost for camera and flash repair? For a6000+
Thank you.
Can anyone pls make a latest miui rom for lenovo a6000 plus???pls,pls
When will you Create Android OREO 8.0 Based Custom ROM
For Lenovo a6000, Im very Excited about Android OREO ???
Im facing this network dropping issue in my lenovo a6000+. whenever i call someone network drops or sometimes when i try to load insta video.and its also effects second slot sim.pleasss help me im sick of this problem.any solution? Im using miui 8.2 stable custom rom .
amit.tiger12 said:
Hi, phone water damaged 2 days ago..
I tried and saved it. But now Camera and flash not working.
Whenever I open camera it says "stopped working".
Is there still water inside out? Camera?
What I can do?? I tried clean flashing latest RR ROM.
But it says the same thing.
Anything hardware related repair can be done from home?
How much it will cost for camera and flash repair? For a6000+
Thank you.
Click to expand...
Click to collapse
Its probably hardware problem.Camera or flat cable died from water.
Muzzamil Zamil said:
When will you Create Android OREO 8.0 Based Custom ROM
For Lenovo a6000, Im very Excited about Android OREO ???
Click to expand...
Click to collapse
I am not a developer i am just helping them.Dont spam threads with this question.Developers have life outside xda and when they manage to get it working they will share it with us
JovanSijacki said:
Its probably hardware problem.Camera or flat cable died from water.
Click to expand...
Click to collapse
I tried replacing other device camera..
I tried replacing it with Lenovo vibe p1m camera.
When opened camera application it shows front camera without any problem but does not show back camera.
How can I root my phone?
pampiii21 said:
How can I root my phone?
Click to expand...
Click to collapse
Install a custom recovery and flash a root solution from the recovery like magisk.
What is the safe overclocking value in lenovo a6000 1 GB variant (GPU..CPU)
Dennyave1
How do I install without the Android 9 PC and everything related to this process on the Lenovo A6000 with Android 5.0.2? Is this possibility of installation at all real (possible) ??? ... I am technical since birth technical antitalent, if possible I ask for a description of how to process to be successful answere !!! ?