Light flow didn't led flashing. Anybody got same problem?
Same, only custom flashing doesn't work when I turn on root for it. The app should be updated for compatibility soon enough
"Light Manager" seems to work ok
Yeah, it'll take time for him to get it all working I dare say.
I installed it, it's flashing fine. However I've noticed 2 issues when using it.
First is the colour rendering of the LED isn't accurate, especially in the cyan range. Put turquoise, sea green, light green and they all come out the same shade of light blue, no matter how much I try and customise it.
Secondly when changing the sleep mode settings, I set it to stop "vibrate only" when it's enabled, leaving the LED and the sound entact. Unfortunately it disabled not only vibrate, but sound as well even tough the tick box was left unticked.
I might switch the logging on, and pass over my findings. Andrew is usually pretty good at responding to any issues to be fair.
Related
I tried looking in the forum for any info on the status LED next to the speaker on the front side but I don't see any posts on this. Is this LED supposed to flash or do something? On my HD it has never worked? Is it supposed to work?
I remember on my Artemis it would flash green for good reception, blue for bluetooth and red if the battery was low.
FrancoBollo said:
I tried looking in the forum for any info on the status LED next to the speaker on the front side but I don't see any posts on this. Is this LED supposed to flash or do something? On my HD it has never worked? Is it supposed to work?
I remember on my Artemis it would flash green for good reception, blue for bluetooth and red if the battery was low.
Click to expand...
Click to collapse
I may be wrong but i was under the impresion that this was a sensor rather than a LED.
No, that's entirely correct, it is the light sensor. The LED is in the power button.
the status led is on the power button on the top right hand side of the blackstone...the place u highlighted is a sensor as what scotia has point out..
I think that it is a proximity sensor used to blank screen when you put the phone on your ear to talk.
It's actually the light sensor used for when you have automatic display brightness enabled. When it's dark, it turns down the brightness... And when it's a sunny day it cracks it up. I am not sure whether it's used to blank the screen during a call... This seems to happen after a period of time has elapsed.
Gav
ok thanks for the info.
So does the power LED on the top side flash any color to show the status of the reception or does it only light up orange when it charges?
Thanks.
doesn't do anything for reception..although mine flashes green hen I have a message/email/reminder
pity though, a decent LED to show such things was probably high on everyone's wishlist
No, the HD is perfectly unobtrusive. On my last PDA the LED had to be tweaked to stop flashing.
Too bad this isnt a LED diode Since I got on my Diamond a light notification (on the bottom of device)... when I recieved new sms... now on HD there is no way I can figure do I have new sms or notification unless I turn the screen on. The only hardware flaw by mine opinion
When its lying down, I agree with you. Then I have to turn on the screen. However when its lying next to me I'm usually not in a place were I can't use my phone, so the sound is on anyway.
I actually think its quite good the LED is on the top, it's easelly visible when the phone is in my pocket. I just have to pull the phone up a little and look down to see the LED (no need to get it out and turn the screen on). I like it on the top, nice and discreet, and not anoying me when I'm looking at the device while using it.
Perhaps a combination would be nice? Front and top That would sattisfy most people I guess...
I have a CDMA Hero from sprint in the US and am wondering if it has dual LED notification lights. I have read in lots of places that it does but am wondering if it actually has dual LED since my notifications only light up the left side. From the dash 3G I remember that the LED on the left was an LED and the one on the right side that looked like an LED was actually the light sensor. I also know that the Hero is supposed to have a light sensor. Just curious, thanks for any help.
::crosses fingers and hopes for Dual LED::
I think (I don't have a Hero yet, I'm just going off the online documentation for it), that the trackball acts as the second indicator "LED", but there isn't one on the right side of the earpiece, only the left. The trackball flashes when you have an incoming call or a notification.
sounds like it's the other way round from the GSM one then...the GSM has the LED on the right and the light sensor on the left.
no Dual LED's
I also have a sprint hero. The left led is the only one that flashes. It doesn't change color either. And the track ball does light up if u turn it on in the settings. As for the second led on the top right, it is definitely the light sensor. U can test it for yourself by putting your finger over it, and watch the screen dim.....
the one on the right is the light sensor.. cover it and it goes dim.
dbroadus2007 said:
I also have a sprint hero. The left led is the only one that flashes. It doesn't change color either. And the track ball does light up if u turn it on in the settings. As for the second led on the top right, it is definitely the light sensor. U can test it for yourself by putting your finger over it, and watch the screen dim.....
Click to expand...
Click to collapse
The LED on the left will change color and flashing pattern depending on your battery life and whether you have notifications or not. No notifications, no light (at least from what I've seen). If you're low on battery, the light goes yellow, and if you're within the 10-15 min boundary or less for battery life, light blinks red.
Thanks for all your help and I didnt realize that I had auto backlight disabled must have done that the first day I was messing with it all, I see now how the sensor reacts to having a finger over it. I would have enjoyed dual LEDs up top but oh well. Any way to customize the color of notifications, tried the handcent but it doesnt affect the LED at all or the trackball light for that matter. Going to try missed call or sms popup later to see if I can get some better results.
dbroadus2007 said:
I also have a sprint hero. The left led is the only one that flashes. It doesn't change color either. And the track ball does light up if u turn it on in the settings. As for the second led on the top right, it is definitely the light sensor. U can test it for yourself by putting your finger over it, and watch the screen dim.....
Click to expand...
Click to collapse
where in the settings can you turn the trackball on to flash? I cant find it anywhere except on Handcent app. Still doesnt flash though on mine for text
erasmogjr said:
Thanks for all your help and I didnt realize that I had auto backlight disabled must have done that the first day I was messing with it all, I see now how the sensor reacts to having a finger over it. I would have enjoyed dual LEDs up top but oh well. Any way to customize the color of notifications, tried the handcent but it doesnt affect the LED at all or the trackball light for that matter. Going to try missed call or sms popup later to see if I can get some better results.
Click to expand...
Click to collapse
I meant to say it does not change colors for notifications lol....but good info though.
ratchetjaw said:
where in the settings can you turn the trackball on to flash? I cant find it anywhere except on Handcent app. Still doesnt flash though on mine for text
Click to expand...
Click to collapse
I read somewhere the flashing trackball doesn't work on our CDMA Hero
That would make sense since I can't seem to get my trackball to flash, what a bummer. Hopefully we can get root or a software fix soon.
T-Mobile DASH 3G Led Indicator Lights
I have a T-Mobile Dash 3G. The left LED light is NOT flashing, and I would prefer that it does. I upgraded to WM 6.5 and I think that is what disabled the LED since I have seen videos on youtube where the indicator does flash.
The LED does glow orange and green when i am charging though.
Err I think you may have the wrong forum. This is for the HTC Hero, which runs Android not WM. Why not try starting your own thread in the correct Forum as you are more likely to get an answer there?
Hello everyone,
Got a Bell Atrix 4G, unlocked it and I am using on Rogers network. So far, it is working well.
I am having a problem setting Notification Light. I tried the built in notification light under Settings and a few different notification light apps from market. I used to get a green light for email before but I don't get it anymore after playing with other free apps. I just can't figure this out. I put my phone on vibration mode at work so I would love to have notification lights working.
What I need is different lights for Missed calls, Email, SMS. Has anyone dealt with this issue?
Any help will be much appreciated and thank you!
I use the app light flow for that. Gives me total control over the LED. I have different colors flash for different notifications.
I use Light Flow https://market.android.com/details?id=com.rageconsulting.android.lightflow
and it handles a ton of apps and uses a TON of color combinations.
Worth the $1.
haha, i was going to start this topic today. I use blue for my Trillian notifications, Purple for yahoo mails.
will try the light app suggested above.
Thanks!
Thank you guys! Yes, "Light Flow" makes it work. Please ensure you turn on "Setting > Display > Notification LED".
Light Flow does not work correctly on the ATRIX AT ALL. I had low battery warnings going off when the battery was fully charged, no charge LED ON option, no charging LED, only discharging WTF?
I (of course) do not have root, but I am running light flow. It seems to be working fine, the LEDs that should go on are working and in the proper colors.
I have unchecked all the LED notifications under settings.
However, when I turn my phone off, the green LED light goes on immediately. It is not plugged in, and it's down to around 92% battery or so.
I even tried disabling all charging/battery related LEDs but still the green LED is on.
Anyone else having this? Any thoughts?
Light Flow is known to cause problems on the S3.
Sent from my MB860 using XDA
bigb252 said:
Light Flow is known to cause problems on the S3.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
And I was wanting to download and use that.
Yes, I see after further testing that uninstalling light flow fixes the issue. Dangit, it appears light flow is far and away the best LED app. I put a note in feedback about it, hopefully the dev will be able to solve it. I'll try it again once we have root for the US version.
Any know if the light flow creator is working on this?
It's listed in the known issues on the developer's site, so I assume they are working on it:
hxxp://www.folioflow.com/ff/page/website/lightflow/pageId/1931
it has something to do with interactions with the built in notifications.. if you disable them then light flo doesnt work.. if you turn them on then whenever the phone goes to sleep a green light comes on.. bummer
i used the LED color tester app and all the LEDs colors are off from what the previous commands were, i guess... so its going to be a while until the led programs work properly
Hey all. Just wanted to post to clear up some discrepancies that I have found concerning the presence or absence of the notification light on the 2014 version of the Moto X. There is in fact a notification light on the Moto X. However, like most users I couldn't find any setting for it or in fact see where it might be located physically on the phone itself.
To enable the notification light I am pretty sure your phone must be rooted and a custom ROM installed. As mentioned before, I had no idea that the Moto X had a notification LED until after I rooted it. When rooting and flashing was when I first saw the LED light up. When putting the device in fastboot mode (Volume down + power), a small green light showed up in the top speaker. Rather, in the slit between the front of the speaker and the body of the phone where the sound emenates from. I just assumed it was kind of a "warning" light to notify you that you were outing the phone in Fastboot mode and ignored it. Anyway, after the new ROM was installed and my notifications started rolling in, the light started lighting up. So far it has lit up for each text and also for my snapchats.
As for why the light was included by Motorola, but was still disabled, I can only guess. I assume that because of the Moto Display feature being included the developers assumed it would be redundant. Indeed, if I had a choice between Moto Display or a notification light, I would probably choose the display, but that just my two cents.
So, if you have rooted and flashed, have you noticed the notification light? Or is this just enabled by Motorola with the android 5.x update? Thoughts?
cvwalker65 said:
Hey all. Just wanted to post to clear up some discrepancies that I have found concerning the presence or absence of the notification light on the 2014 version of the Moto X. There is in fact a notification light on the Moto X. However, like most users I couldn't find any setting for it or in fact see where it might be located physically on the phone itself.
To enable the notification light I am pretty sure your phone must be rooted and a custom ROM installed. As mentioned before, I had no idea that the Moto X had a notification LED until after I rooted it. When rooting and flashing was when I first saw the LED light up. When putting the device in fastboot mode (Volume down + power), a small green light showed up in the top speaker. Rather, in the slit between the front of the speaker and the body of the phone where the sound emenates from. I just assumed it was kind of a "warning" light to notify you that you were outing the phone in Fastboot mode and ignored it. Anyway, after the new ROM was installed and my notifications started rolling in, the light started lighting up. So far it has lit up for each text and also for my snapchats.
As for why the light was included by Motorola, but was still disabled, I can only guess. I assume that because of the Moto Display feature being included the developers assumed it would be redundant. Indeed, if I had a choice between Moto Display or a notification light, I would probably choose the display, but that just my two cents.
So, if you have rooted and flashed, have you noticed the notification light? Or is this just enabled by Motorola with the android 5.x update? Thoughts?
Click to expand...
Click to collapse
It's not disabled, it's just not a notification light. On the stock rom it's used to indicate that the phone is charging or low on battery if the phone is not turned on. Custom roms override that feature and use it as a notification light instead.
I'll take your word for it. However, I never saw an option for it on the settings, and it never once lit up while I was charging, on or off.
Thanks for the input and explanation!
cvwalker65 said:
I'll take your word for it. However, I never saw an option for it on the settings, and it never once lit up while I was charging, on or off.
Thanks for the input and explanation!
Click to expand...
Click to collapse
I think it only comes on if the battery is so low that the phone can't turn on yet to indicate that it's getting power.
I saw mine blink one time. It was when I was rebooting. I saw a Red light flash real quick. Really wish I was rooted so I could enable it.
No need to have a custom rom. If you are rooted you can simply enable it using Tasker. I use it for certain profiles.
TokedUp said:
I saw mine blink one time. It was when I was rebooting. I saw a Red light flash real quick. Really wish I was rooted so I could enable it.
Click to expand...
Click to collapse
You saw one of the IR sensor lighting up. the only led on the X 2014 is a green one.
No. It was the light. But I'll argue with u more about it since I'm bored.
There are MANY YouTube reviews that mention the IR sensors and the "light flash"..
Sent by my Motorola Droid XYBoard MZ617-32 10.1_ICS 4.04
i'm on stock 5.0 rooted and light flow app. led notification works well
Please share tour settings.
My config. 20 in intensity is plenty sufficient
as in the "other post" i share here my config
Bad news (for me) after lightflow update (playstore 17 February) no more led notification. Can't make led work
So baaaaaad
Iv been using Tasker and the "notification listener" plugin.
Iv just set up profiles to switch a variable on and off based on notification posted/cleared.
Then a task that runs an LED flashing loop based on that variables value.
In tasker, the LED is called "charging led" not a notification led.
michyall said:
Bad news (for me) after lightflow update (playstore 17 February) no more led notification. Can't make led work
So baaaaaad
Click to expand...
Click to collapse
That happened to me on the version before this update, it was driving me crazy. LED just stopped working, tried everything to fix but it wouldn't work. Then this morning it was working and then I saw the update so I backed up the app with titanium and updated. So far, knock on wood, been working all day.
I solved unonstalling LF and re-installing from playstore. Works again. +1
michyall said:
I solved unonstalling LF and re-installing from playstore. Works again. +1
Click to expand...
Click to collapse
I am having this issue, again, so frustrating. A reboot fixed it for a short period but the led stopped working again. I haven't tried uninstalling and redownloading but that is my next step.
I would really like to know what is causing this, the app or something with the stock rom.
Don't know why. Now i'm on cm nightlies, no need LF, led's working good
Is possible to create some kind of "patch" to use the notification LED on Stock ? I mean to use it as a native LED, like on CM builds, basically port this function from CM and implement it on Stock?