I9505 gets no service after flashing to a custom ROM - Galaxy S 4 Q&A, Help & Troubleshooting

So after deciding to get CM11 last night, and a long, arduous process of getting it installed, my phone now has no service. Upon booting, I have about 10 seconds tops of reception until it just vanishes. I have flashed back to stock ROM and flashed to the modem it was on before twice. Still nothing. Is there hope?

There is always hope.
What rom and modem are you using now? Did you perform a full wipe in the recovery?

Lennyz1988 said:
There is always hope.
What rom and modem are you using now? Did you perform a full wipe in the recovery?
Click to expand...
Click to collapse
Currently using stock. Modem is I9505XXUGNH7. And yes, I did wipe

Reflashed both the stock rom and then the modem again... still nothing. I'm on 4.4.2
EDIT: After manually selecting carrier I actually get reception, but it says network unavailable. My IMEI is unchanged. Baseband is the same as it was before when it was fine. Any ideas?

Would be a good idea to download latest stock Firmware from sammobile and flash via odin, report back with results

MohamedN said:
Would be a good idea to download latest stock Firmware from sammobile and flash via odin, report back with results
Click to expand...
Click to collapse
I already did.
EDIT: After calling my service provider, they say everything's ok with my SIM. I can access mobile data on 4g and everything, APNs are fine. Just says I'm not registered on network. Already flashed again to a more recent modem. Still the same.

Related

GT-i9505 No mobile network/data after flashing custom ROM

Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
samersh72 said:
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
Click to expand...
Click to collapse
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
somepepe**** said:
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
Click to expand...
Click to collapse
and reflash the custom rom after flashing the modem
samersh72 said:
and reflash the custom rom after flashing the modem
Click to expand...
Click to collapse
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
going out now for a while but thought id ask - do you think that installing official stock rom (perhaps from your s4 unrooting guide) would help flashed via odin? from searching i can see that some folk suggest that stock will reinstall everything i need...im hoping so, i really wouldnt mind going back to stock, anythings better than this
somepepe**** said:
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
Click to expand...
Click to collapse
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
samersh72 said:
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
Click to expand...
Click to collapse
yes put it in "phone" mode, thats the second or third one i have flashed now so im not sure it wont help but for sure ill try again!
are you able to determine that its not corrupted? would it state as such if it were? im going to flash a stock firmware as a last resort. lost after that haha
edit - installed cwm using sgs4 flasher and re-installed my custom rom and gapps, booted no probs and network now working - sorted!! thanks for your help i dont think i would have reflashed the rom without your advice to do so
So I'm practically in the same boat. I'm currently on P.A.C. man nightly 09/18 (Vodafone Germany branded device). I never had similar problems, but now I can't call (or be called) and I'm not able to use mobile data.
I nearly tried everything:
1) I checked the IMEI (saved it before switching over to custom roms), but an IMEI number is still there.
2) Went back to stock to see if it's a problem of P.A.C. man ROMS or not. On stock it didn't work either.
3) Went back to P.A.C. man ROM and flashed modem XXUBMF8 via Odin 3.04 (from this thread: http://forum.xda-developers.com/showthread.php?t=2192025)
4) Flashed the modem again after I flashed the ROM because it didn't work either.
So I'm completely lost now, I really don't know what to do next. I had mobile data for a couple of seconds every now and then, but nothing stable. And since the problem came up (yesterday evening) I can not make any calls at all.
Can someone help me?
Edit: The very strange thing is that I have full reception balks in the notification area (only in grey). But still, I guess this means that the device is somehow able to detect a signal but can not connect to it?
Edit2: I apparently have no Device-ID. May that be a problem?
So I took some screenshots to show you guys my problem a bit better. For some reason my mobile data now works (currently HSPA, but it's extremely slow). But I still can't make any calls (or get called too). =/
Edit: So to sum this up: the strangest thing about this problem is, that even when I go back to full stock I can't make calls. =/ What could be the problem? An IMEI number is present in the settings (althouh the 'IMEI SV' under 'About phone' --> 'Status' was one digit below the current one that I can see under those stats). The whole problem makes me believe that my provider can't sort my phone number to my device (I'm on Vodafone; but if that's really the case: why the hell does mobile data works sometimes?!). The other possibility: something with the modem/radio is broken. Could this be the problem? The thing is that I also tried to flash a custom modem, but the problem is still there...
I'm really concerned that my phone just became an expensive paperweight
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your answer!
You also flashed a different modem didn't you? Did this help or was it only the custom recovery? I'm confused because I used CWM before and never had problems. But then this mess all came up...
Yes I flashed several modems, that didn't help..only using a different custom recovery to flash my custom Rom again helped..hope you get sorted!
Sent from my GT-I9505 using xda app-developers app
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Gotcher said:
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Click to expand...
Click to collapse
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
soyusado said:
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
Click to expand...
Click to collapse
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Install stock ROM
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Mate you should try installing Stock ROM that might help I think !
.::Alien::. said:
Mate you should try installing Stock ROM that might help I think !
Click to expand...
Click to collapse
I tried that already, but it didn't help. Same problem...
I factory resetted the phone, wiped cache and dalvik cache and then flashed my Vodafone branded stock ROM via Odin that I had on my device when I got it. Didn't help for some reason... But: should I also try to go back to stock ROM via KIES? I haven't tried this method until now...
Edit: About my flashing method: I went from the stock ROM to rooted (via CF Auto root with Odin). For PAC I then flashed TWRP 2.6.0 and then in recovery factory resetted the phone, wiped cache and dalvik and then installed PAC. After that I installed GApps. I used this method before and it worked without any problems...
Edit2: I found this thread, it appears to be the same/a similar problem with the S3: http://forum.xda-developers.com/showthread.php?t=1805709&page=6
Now is there something similar for the S4? I think I tried calling ##72786# on stock ROM and it didn't work...
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Delete the unused APNs.
Do you have mobile data?
Also I asume that you're running the latest vertigo's build, because with me GSM/WCDMA/LTE is always selected.
Sent from my GT-I9505 using Tapatalk 4
Sometimes I have mobile data, but only for very limited time; for the majority of time, I don't have mobile data and can not make calls.
I also tried to delete the unused APNs, but still no change =/
I tried to use a different Micro SIM in this device, but the same problem appears. No data, no phone although I have grey reception balks.
any update on this one?!

[Q] No mobile data after flashing Wicked v.9.1 to stock slot

Recently flashed Wicked v. 9.1 onto the stock slot using safestrap recovery, so far the rom has been working fine, and I've set up the apn. When looking at device info it shows I am connected to AT&T and LTE, but my mobile network state is disconnected. Any solutions for this?
DVezor said:
Recently flashed Wicked v. 9.1 onto the stock slot using safestrap recovery, so far the rom has been working fine, and I've set up the apn. When looking at device info it shows I am connected to AT&T and LTE, but my mobile network state is disconnected. Any solutions for this?
Click to expand...
Click to collapse
Check to see if you still have the same modem as you started with.... I flashed a rom, I had connection but would cut out now and again... ended up relashing the same modem that was on the phone before... (modem did not change) now I have data and solid connection for phone calls.
Gage_Hero said:
Check to see if you still have the same modem as you started with.... I flashed a rom, I had connection but would cut out now and again... ended up relashing the same modem that was on the phone before... (modem did not change) now I have data and solid connection for phone calls.
Click to expand...
Click to collapse
Not sure which modem I had before however I flashed from mk2 and just flashed the new modem and still no change
DVezor said:
Not sure which modem I had before however I flashed from mk2 and just flashed the new modem and still no change
Click to expand...
Click to collapse
You sure mobile data is checked on in the settings? And did you flash the MK2 modules?
Google the kind of phone you have and ATT is your provider I take it? Include which version of android also so something like..... i337 modem att android 4.3 of course swtich the proper name and provider that you have. You don't want to be flashing the wrong modem you could end up with a paper weight....

[Q] Samsung Note 3 N9005 NO SIM Inserted

When I upgrade my Samsung N9005 (European version) to Android 4.4, it does not detect any of my sim cards. I have tried this on three phones I have and am now sure there is a porblem with the firmware not my sim card. I am on China Unicom. I have also tried to insert a sim from a different country, it does not even ask for the pin since to it nothing is inserted. I have tried different region firmwares from HongKong, United Kingdom and Unknown. Please help.
Anyone?
How do I make my posts popular. I always ask questions on this forum and never receive answers. Yet there are 52k people online.
Be patient. You are not special that you should get immediate answers on your topics.
Thought about possible hardware failure? It could go under warranty as well.
Someguyfromhell said:
Be patient. You are not special that you should get immediate answers on your topics.
Thought about possible hardware failure? It could go under warranty as well.
Click to expand...
Click to collapse
Its not a hardware failure. I have three phones which I got after exchanging so this is six in total that have this issue. I also cannot downgrade back to 4.3 which is what I would prefer as for now.
What version of 4.4.2 you have? I need the build number.
I would recommend reflashing firmware, might eliminate those bugs.
Someguyfromhell said:
What version of 4.4.2 you have? I need the build number.
I would recommend reflashing firmware, might eliminate those bugs.
Click to expand...
Click to collapse
I have tried 4.4.2 N9005XXUEND3_N9005OXAEND1_BTU and UK firmware N9005XXUEND3-N9005OXAEND1.
Just to add some detail, my phose Baseband is unknown and when I try to check the IMEI I cannot since it interpretes it as a phone call "Mobile Network not available"
Look around the forum, there are solutions for that. Apparently something went wrong when you updated firmware.
Sent from my SM-N9005 using Tapatalk
brokesergey said:
Just to add some detail, my phose Baseband is unknown and when I try to check the IMEI I cannot since it interpretes it as a phone call "Mobile Network not available"
Click to expand...
Click to collapse
Try re-flashing the entire firmware, or extract only modem files and flash it manually. See the post here: http://forum.xda-developers.com/showpost.php?p=52948152&postcount=13
vndnguyen said:
Try re-flashing the entire firmware, or extract only modem files and flash it manually. See the post here: http://forum.xda-developers.com/showpost.php?p=52948152&postcount=13
Click to expand...
Click to collapse
I'm experiencing the same issue. Flashed a new Temasek CM11 nightly and after booting into the rom for the first time no PIN unlock dialogue appeared. The phone is stuck at "searching for service". My IMEI number is still there and both SIM cards I have tried work perfectly in my iPhone.
I'm still on JB 4.3 bootloader with CMW recovery 6.0.4.5 and baseband is N9005XXUBMI6. Is it possible something got messed up when flashing latest CM? Perhaps baseband/modem firmware outdated?
I'm downloading N9905XXUEND3 and will flash back completely to stock. Will report back here later.
AO7 said:
I'm experiencing the same issue. Flashed a new Temasek CM11 nightly and after booting into the rom for the first time no PIN unlock dialogue appeared. The phone is stuck at "searching for service". My IMEI number is still there and both SIM cards I have tried work perfectly in my iPhone.
I'm still on JB 4.3 bootloader with CMW recovery 6.0.4.5 and baseband is N9005XXUBMI6. Is it possible something got messed up when flashing latest CM? Perhaps baseband/modem firmware outdated?
I'm downloading N9905XXUEND3 and will flash back completely to stock. Will report back here later.
Click to expand...
Click to collapse
Sorry I've never tried CM so I'm not sure what happens.
Please feedback.
vndnguyen said:
Sorry I've never tried CM so I'm not sure what happens.
Please feedback.
Click to expand...
Click to collapse
I have managed to solve the problem.
1. First back up EFS and FSG in case you haven't done that yet. On the N9005 your IMEI information is stored in FSG so do not use any tools that only backup the EFS without the FSG. For tools check here: http://forum.xda-developers.com/showthread.php?t=2611903
2. Flash stock image for N9005. I was still on JB 4.3 with the unlocked bootloader so I flashed JB 4.3 again, didn't bother with KK 4.4 which will lock the bootloader after flashing.
3. Booting back into stock and the SIM PIN entry menu appeared straight away.
4. Flash CWM recovery appropriate to your bootloader 4.3 or 4.4
5. Flash CM
6. SIM PIN entry and cellular works perfectly again
conclusion:
I'm not sure why this happened. Downgrading to a previous CM build did not solve the issue. So I'm reluctant to blame CM itself. Perhaps the recovery was the culprit. Somewhere something must have been corrupted during a flash. Luckily nothing that couldn't be fixed by flashing stock.

Data modem not functioning after clean wipe / flash

I have this strange problem where sometimes my modem does not work after a clean flash. Usually just making sure the data network preference is set to LTE solves the issue, and after 10 min or less the phone picks up the band. But I've just done a clean flash teamUB 1/11 and its been 24 hours with no data connection. This same build worked fine for this same phone a week ago, but the 1/19 broke the phone so I had to do a clean wipe and go back to 1/11.
I've played with data roaming options in CDMA roaming mode, set to domestic roaming, national roaming. Still no data
Any advice?
This is for a 900P (sprint) - Note that I am on CREDO (uses Sprint network)
EDIT - FIXED YAY!!! FULL LTE WORKING GREAT!
Reflashing the NKD modem for 5.0 +, with advice here:
http://forum.xda-developers.com/showpost.php?p=58338773&postcount=12
Changing APN/Mobile settings to recommended here:
http://forum.cyanogenmod.org/topic/84151-credo-mobile-4g/#entry430448
Iriez said:
I have this strange problem where sometimes my modem does not work after a clean flash. Usually just making sure the data network preference is set to LTE solves the issue, and after 10 min or less the phone picks up the band. But I've just done a clean flash teamUB 1/11 and its been 24 hours with no data connection. This same build worked fine for this same phone a week ago, but the 1/19 broke the phone so I had to do a clean wipe and go back to 1/11.
I've played with data roaming options in CDMA roaming mode, set to domestic roaming, national roaming. Still no data
Any advice?
This is for a 900P (sprint)
Click to expand...
Click to collapse
Since last time / last week have you flashed any new modems?
lingowistico said:
Since last time / last week have you flashed any new modems?
Click to expand...
Click to collapse
The issue started when I was forced to wipe my system data and do a clean install in order to get the phone functional after boot loop from 1/19 update. so yes, I would assume that the modem built into the 1/11 update I rolled back to (clean install) contained the modem. But, as stated, the 1/11 build was working fine for me before, and not now.
Is there a way to just update the modem itself on this build/phone? I've been wondering about that and wanted to try it if possible.
Iriez said:
The issue started when I was forced to wipe my system data and do a clean install in order to get the phone functional after boot loop from 1/19 update. so yes, I would assume that the modem built into the 1/11 update I rolled back to (clean install) contained the modem. But, as stated, the 1/11 build was working fine for me before, and not now.
Is there a way to just update the modem itself on this build/phone? I've been wondering about that and wanted to try it if possible.
Click to expand...
Click to collapse
There is no modem included in TeamUB's roms.
First thing's first, what model are you using? Go to signature settings and write your model there, this way whoever is helping you they will know what they're dealing with.
lingowistico said:
There is no modem included in TeamUB's roms.
First thing's first, what model are you using? Go to signature settings and write your model there, this way whoever is helping you they will know what they're dealing with.
Click to expand...
Click to collapse
Sorry, I wrote 900P in the first post, I thought that was enough information. I've updated my signature to contain more information.
thanks
Iriez said:
Sorry, I wrote 900P in the first post, I thought that was enough information. I've updated my signature to contain more information.
thanks
Click to expand...
Click to collapse
No need to say sorry man, just mean it makes it easier. Haha you're signature says 900O lol.
1 Install Samsung USB driver for mobile phones
2 Download the NE5 modem one click flasher here
3 Put your phone into download mode (Turn off the device, press Volume Down, Home and Power Buttons simultaneously, Once you see the warning message, release all buttons, Press Volume Up to enter download mode, Now your device should be in download mode)
4 Run the file from #2 and flash modem (if NE5 doesn't help try the other ones).
I don't think it's a modem problem though. IMO it's either the rom or the operator..
lingowistico said:
No need to say sorry man, just mean it makes it easier. Haha you're signature says 900O lol.
1 Install Samsung USB driver for mobile phones
2 Download the NE5 modem one click flasher here
3 Put your phone into download mode (Turn off the device, press Volume Down, Home and Power Buttons simultaneously, Once you see the warning message, release all buttons, Press Volume Up to enter download mode, Now your device should be in download mode)
4 Run the file from #2 and flash modem (if NE5 doesn't help try the other ones).
I don't think it's a modem problem though. IMO it's either the rom or the operator..
Click to expand...
Click to collapse
The NE5 throws a <OSM> MD5 hash value is invalid error. I flashed the ND2 version and no immediate data connection, but from past experience it can take a little while for the modem to sync. No idea what causes the delay, but everytime i flash a new rom it can take sometimes up to 30min before it gets a data connection. Been 15min no connection yet.
Couldnt find a mirror anywhere of that NE5 one click flasher. Know of any other hosts? i googled to no avail.
Iriez said:
The NE5 throws a <OSM> MD5 hash value is invalid error. I flashed the ND2 version and no immediate data connection, but from past experience it can take a little while for the modem to sync. No idea what causes the delay, but everytime i flash a new rom it can take sometimes up to 30min before it gets a data connection. Been 15min no connection yet.
Couldnt find a mirror anywhere of that NE5 one click flasher. Know of any other hosts? i googled to no avail.
Click to expand...
Click to collapse
Try downloading the tar here and flash it in Odin.
lingowistico said:
Try downloading the tar here and flash it in Odin.
Click to expand...
Click to collapse
Update:
I have restored a old backup to kitkat, modem working fine, instant connection. Then I did a system wipe, clean flash to cyanogenmod 1/20 update released yesterday.....no modem. Restored backup again to kitkat, then did a dirty flash to 1/20 cyanogenmod.....no modem.
I think the issue is 5.0 itself. The issue is so random, I do not know how to troubleshoot it. I've installed maybe a dozen CM's so far, and its been a coin toss whether the modem works after install. Sometimes it syncs up after a few min, and sometimes never. its really strange because I had the modem working fine on TeamUB from late december, through 3 or 4 updates until 1/19 boot looped it. Now after that nothing has gotten the data back on other than restoring to kitkat.
When i did the clean install to cyanogenmod, on the startup process where it says 'waiting to activate cellular service' it gets stuck there and never activates the data.
Also, when trying to flash the NE5 tar md5 you linked to, I get md5 error! Binary is invalid. Im supposed to use AP, yes?
EDIT - Changed preferred network type to 3G and after a few reboots got data! Going to change back to LTE now and give it some time to see if i can get it to sync up.
Iriez said:
Update:
I have restored a old backup to kitkat, modem working fine, instant connection. Then I did a system wipe, clean flash to cyanogenmod 1/20 update released yesterday.....no modem. Restored backup again to kitkat, then did a dirty flash to 1/20 cyanogenmod.....no modem.
I think the issue is 5.0 itself. The issue is so random, I do not know how to troubleshoot it. I've installed maybe a dozen CM's so far, and its been a coin toss whether the modem works after install. Sometimes it syncs up after a few min, and sometimes never. its really strange because I had the modem working fine on TeamUB from late december, through 3 or 4 updates until 1/19 boot looped it. Now after that nothing has gotten the data back on other than restoring to kitkat.
When i did the clean install to cyanogenmod, on the startup process where it says 'waiting to activate cellular service' it gets stuck there and never activates the data.
Also, when trying to flash the NE5 tar md5 you linked to, I get md5 error! Binary is invalid. Im supposed to use AP, yes?
EDIT - Changed preferred network type to 3G and after a few reboots got data! Going to change back to LTE now and give it some time to see if i can get it to sync up.
Click to expand...
Click to collapse
No luck leaving it on LTE. When I switch back to 3g I can get a connection, LTE set in preferences I get no connection, not even 3g. I've been testing around the city and at my home, where I can always pickup a LTE connection from past experience.
It seems that the LTE protocol within 5.0 is buggy for my situation. If it works, it seems to work fine, but when it doesnt work, it never works. So its either glass is full or empty
Iriez said:
No luck leaving it on LTE. When I switch back to 3g I can get a connection, LTE set in preferences I get no connection, not even 3g. I've been testing around the city and at my home, where I can always pickup a LTE connection from past experience.
It seems that the LTE protocol within 5.0 is buggy for my situation. If it works, it seems to work fine, but when it doesnt work, it never works. So its either glass is full or empty
Click to expand...
Click to collapse
There are two versions of labels in Odin. The "normal" says "phone" the one I don't like says "CP". You have the Odin I don't like lol, so yours says "CP". That's where you put the modem. "AP" is for firmware/roms only.
Try these two modems, which I found on this page, NK4 for 4.4 while NKD is for 5.0.
Try Ktoosez kernel and also check your Apn settings, it's supposed to be optimised for CDMA phones and might help you.
lingowistico said:
There are two versions of labels in Odin. The "normal" says "phone" the one I don't like says "CP". You have the Odin I don't like lol, so yours says "CP". That's where you put the modem. "AP" is for firmware/roms only.
Try these two modems, which I found on this page, NK4 for 4.4 while NKD is for 5.0.
Try Ktoosez kernel and also check your Apn settings, it's supposed to be optimised for CDMA phones and might help you.
Click to expand...
Click to collapse
Wahooo! Flashing NKD with odin and messing with the APN's has fixed it!!! You rock!
I took a look at ktoosez kernel, what exactly would it bring to me? Always interested in new tools......
Iriez said:
Wahooo! Flashing NKD with odin and messing with the APN's has fixed it!!! You rock!
I took a look at ktoosez kernel, what exactly would it bring to me? Always interested in new tools......
Click to expand...
Click to collapse
Congrats! I'm glad it worked out Ktoonsez mentioned in the CM12 thread that his kernel was optimized for sprint/verizon phones in some way, don't remember what though :silly:

No 3G network after flashing ROM via TWRP!! need help

I restored my stock ROM which was backuped by TWRP. I installed various ROMs before but never faced this typo network issue. But now facing 3G network problem. I tested , there's no problem with the network provider. Installed CM12, but still it's EDGE. When I'm clicking 3G the sim card turns to 'No Service'.
Any solution for this? Please
[email protected] said:
I restored my stock ROM which was backuped by TWRP. I installed various ROMs before but never faced this typo network issue. But now facing 3G network problem. I tested , there's no problem with the network provider. Installed CM12, but still it's EDGE. When I'm clicking 3G the sim card turns to 'No Service'.
Any solution for this? Please
Click to expand...
Click to collapse
change SIM in slot
itsmedRb said:
change SIM in slot
Click to expand...
Click to collapse
No Result
Try remove "persist.radio.multisim.config=dsds" from build.prop
I know, this may sound irrelevant, but anyway, which base firmware was you on before installing CM? Check 'About' section.
There seems to be some bugs in our phone, when you install CM over old stock firmwares. Well, I'm not sure. But try flashing the latest firmware (it's A3 for G360H), then install CM over it by following the regular steps. I'm repeating again, I'm just speculating, not sure.
AtomR said:
I know, this may sound irrelevant, but anyway, which base firmware was you on before installing CM? Check 'About' section.
There seems to be some bugs in our phone, when you install CM over old stock firmwares. Well, I'm not sure. But try flashing the latest firmware (it's A3 for G360H), then install CM over it by following the regular steps. I'm repeating again, I'm just speculating, not sure.
Click to expand...
Click to collapse
The Baseband version is G360HDDU0ANL3
But I installed CM by formatting everything via TWRP!!
[email protected] said:
The Baseband version is G360HDDU0ANL3
But I installed CM by formatting everything via TWRP!!
Click to expand...
Click to collapse
Uh, that's a pretty old firmware, I think.
I know, we all install CM by format everything. I just have a thought that the firmware on which you install CM, affects the CM as well.
For now, try format everything again. Flash the A3 firmware using Odin. Then flash CM again, by following necessary instructions.
Do it, only if you're free/willing to do. I'm only 50% sure about this firmware thingy has any effects on CM. Lol.
Maybe your efs has been corrupt. Check your IMEI go to phone, dial *#06# see if your IMEI is all 0.

Categories

Resources