hi, i m one probleme : the OTA not working on stock room There is no doubt that the problem is my csc ORIGINAL is ATL
but now i m on BTU
my knox is 0X1 (2)
how i can fix it
AND THAKNS FOR ALL:good:
Related
What will happen if i flash a device which has Russia's(or Other Countries) 4.3 ROM , with India's 4.3 ROM? Will it set the KNOX warranty Bit flag.
I bought my phone in India. After i started using Omega ROM which has MG9 modem, i was never able to switch back to Indian Stock 4.2.2 which had MG5 modem, as in MG5 modem i was getting a generic IMEI and the network was not working. So i settled for using the KSA 4.2.2 ROM which has MG9 modem, hoping someday India ROM will get MG9 or higher. My device still shows the Official Status in the Download Mode.
My big problem now i how do i get back to Indian Firmware without voiding the Know warranty. Can i wait for 4.3 to release in KSA and then flash back India's 4.3 so that i dont face the IMEI problem with the ROM's? If i do this will it void the Knox warranty?
Or flash the MG5 ROM of India and get the official 4.3 India update? will this solve my IMEI issue?
I also heard that there is a binary counter for the number of times a Custom ROM is flashed. If we upgrade to 4.3 with non-zero binary counter will the KNOX warranty void flag?
parvezthepop said:
What will happen if i flash a device which has Russia's(or Other Countries) 4.3 ROM , with India's 4.3 ROM?
Click to expand...
Click to collapse
Nothing
parvezthepop said:
What will happen if i flash a device which has Russia's(or Other Countries) 4.3 ROM , with India's 4.3 ROM? Will it set the KNOX warranty Bit flag.
I bought my phone in India. After i started using Omega ROM which has MG9 modem, i was never able to switch back to Indian Stock 4.2.2 which had MG5 modem, as in MG5 modem i was getting a generic IMEI and the network was not working. So i settled for using the KSA 4.2.2 ROM which has MG9 modem, hoping someday India ROM will get MG9 or higher. My device still shows the Official Status in the Download Mode.
My big problem now i how do i get back to Indian Firmware without voiding the Know warranty. Can i wait for 4.3 to release in KSA and then flash back India's 4.3 so that i dont face the IMEI problem with the ROM's? If i do this will it void the Knox warranty?
Or flash the MG5 ROM of India and get the official 4.3 India update? will this solve my IMEI issue?
I also heard that there is a binary counter for the number of times a Custom ROM is flashed. If we upgrade to 4.3 with non-zero binary counter will the KNOX warranty void flag?
Click to expand...
Click to collapse
Incase u hvnt installed 4.3 yet -
Oky, heres what u do: revert back to stock 4.2.2 android, then go to software update, (it will b good if u use triange away and remove the no.) and u shud receive update for indian firmware, since bootloader is installed later u wont loose ur warranty(when u will install it for first time the warranty bit says 0 ..)
I installed 4.3 russian fw by mistake and since my warranty bit was 0 samsung installed indian firmware on my phone(had to fight a lil tho ..)
Dnt do anything after flashing 4.3 for first time, since whatever u do will trip a flag, thus voiding the warranty ... i had isssues getting my phone fixed even at warranty bit 0 ..
Hope that helped ...
First reverted back to India MG5 4.2.2 ROM and then did 4.3 update through kies and everything went fine.
Now my fake imei problem is gone and I am back under warranty
Thanks for the help
Sent from my GT-I9500 using xda app-developers app
Help
parvezthepop said:
First reverted back to India MG5 4.2.2 ROM and then did 4.3 update through kies and everything went fine.
Now my fake imei problem is gone and I am back under warranty
Thanks for the help
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Hi,
You said that you used OMEGA rom. It means you rooted your phone and installed CWM recovery. Now you installed I9500XWUBMG5 4.2.2 stock rom and updated to stock 4.3 via KIES or OTA. My question is now your KNOX warranty is 0x0 or 0x1.
Could you please confirm I want root my phone.
Thanks.
What will happen if i install russian 5.1.1 to my indian galaxy note 3 neo
hello guys any one here i had flash indian firmware were few days ago bt now i want to back to nepal firmware ...my device is j7 2016 model plz help me to go back to nepal firmware again
@rohit gurung: The forums for your device are here. To install the Nepal firmware you need to download it from a site like Sammobile and flash it to the device just like you flashed the Indian firmware.
Hello brothers, past week i updated my gs4 i9500 from 4.2.2 official to 4.3 official indian version as Pakistan hasnt yet recieved this update.. after that i tried to downgrade back to 4.2.2 but odin failed , odin mode said " unsupported version *.. After that i managed to flash South African Stock rom 4.2.2 xfe and it went fine, not when i am trying to flash my own region Pakistan's official 4.2.2 ... Same error occurs.. Suggest me how can i get rid of samsung knox, my warranty bit has also changed from 0 to 1, that means its void too.. HELP ASAP
You cannot get rid of KNOX.
Once the knox bootloader has been flashed, you cannot downgrade the bootloader.
Once the KNOX flag has been triggered it cannot be reset.
Hello .. sorry for my English.
I have GT-i9500 which i updated to official 4.3 Russian firmware ( KNOX enabled) . As i live in Pakistan, the official firmware (4.3) for Pakistan is available now. My question is can i update my Russian firmware to Pakistan firmware through ODIN with out triggering the knox counter or bricking my phone? Thanks in advance
Hi
You can upgrade from one Knox enabled firmware to another but cannot downgrade as it will trigger the Knox flag.
I, personally, moved from the German stock MJ5 to the British stock MJ7 and the flag wasn't triggered.
Good luck.
Hey Guys, did anyone flash the new 4.3 Firmware for the Galaxy S4 i9506 via Odin ?
What about the Knox flag ?
Are there any issues with wifi and is it possible to use it in Germany ?
Thank you
GalaxySven said:
Hey Guys, did anyone flash the new 4.3 Firmware for the Galaxy S4 i9506 via Odin ?
What about the Knox flag ?
Are there any issues with wifi and is it possible to use it in Germany ?
Thank you
Click to expand...
Click to collapse
i flashed singapore 4.3 to my i9506 and it failed, knox flag is 0x0 luckily. working on getting it up and running again..:crying:
hi
i have n9005 from germany dist. i want N9005XXUEND3 and XEO, so can i just reflash n9005 via Odin with N9005XXUEND3 without trip knox to 0x1 ?
i want N9005XXUEND3 because it's last XEO dist. and towellroot working ok with this ( i know i can flash N9005XXUEND3 kernel -dead wifi- make towelroot and reflash back to previous kernel to enable root).
so to make story shor can i reflash this firmware without fears of 0x1 etc.. ?
As long as you're flashing a stock kernel it wont trip knox
Sent from my SM-N9005 using XDA Free mobile app
i made reflash odin 3.09 firmware N9005XXUEND3_N9005XEOEND2_N9005XXUENC2_HOME.tar.md5 during system.img.ext4 flash i saw info on LCD "invalid percent of drawig...." after this i have knox 0x1, very sad...
Also after reflash i have modem firmware UNKNOWN and i don't have sound at all
psg said:
hi
i have n9005 from germany dist. i want N9005XXUEND3 and XEO, so can i just reflash n9005 via Odin with N9005XXUEND3 without trip knox to 0x1 ?
i want N9005XXUEND3 because it's last XEO dist. and towellroot working ok with this ( i know i can flash N9005XXUEND3 kernel -dead wifi- make towelroot and reflash back to previous kernel to enable root).
so to make story shor can i reflash this firmware without fears of 0x1 etc.. ?
Click to expand...
Click to collapse
You are trying to downgrade from FNG2 to END3 firmware and it is not possible.
That may brick your device
i reflash with N9005XXUFNG2_N9005ATOFNG1_N9005XXUFNG2_HOME.tar.md5 then sound back to work, also during flashing system there was no "invalid ..."
after this i made update via phone menu (intenet+wifi) to latest N9005XXUGNG1_N9005ATOGNG1_N9005XXUGNG1_HOME.tar.md5 but knox 0x1 stayed
then i made root:
flash odin >> KERNEL_N9005XXUEND3.tar.md5 (got custom status) << then use towelroot than flash back to KERNEL_N9005XXUGNG1.tar.md5 and status changed to official .... but knox 0x1 still there...
hi again.
now there is android 5.0. Of course i got info and tried to update phone via wifi but after it download firmware (over 810mb) during recovery flash it end at 29% with ERROR message than suggest to use KIES so can i now use POLAND XEO firmware:
Code:
Model SM-N9005
Model name GALAXY Note 3 LTE
Country Poland
Version Android 5.0
Changelist 3643614
Build date Wed, 25 Feb 2015 12:57:23 +0000
Product code XEO
PDA N9005XXUGBOB6
CSC N9005XEOGBOA4
links are here:
Code:
http://www.sammobile.com/firmwares/download/43864/N9005XXUGBOB6_N9005XEOGBOA4_XEO/
http://www.sammobile.com/firmwares/download/43186/N9005XXUGBOA5_N9005XEOGBOA4_XEO/
if YES, which file should i use B6 or A5 ?
See your identical post .