hi friends , iam just corious what will happen on a device if we enable / disable board_id lines from cpu , can this cause " fake blank " sintomps , or like qualcomm devices cause a developer mode enabling ?
please give me your opinion
br
roger
Related
hi,
i installed some apps like bsbtweaks.. after a day i realised my cam app only work after first mins of reboot , if i run app and try to open cam it says like : failed to setup cam etc.
this is my first experience on hd2 and wm, what can i do to solve this problem ? thanks , btw i can edit registry or system files =)
offical and last firmware.
Disable all extra modes and resolutions for camera in BSB. Those extra modes needs more RAM, which is usually only available after start, and/or when no other application is running (Opera 10 is known to eat almost all RAM for example).
thank you , i have already disabled them but it was still not working , then i found a registry entry that says " deactivate" in cam settings and set it to 0 , cam is working for now in full ram , but i am still test-ng if it is going to be ok.
If push comes to shove, a hard reset usually fixes most issues !
I am getting errors again ... any ideas ? not hard reset please =)
Hello frinds please help me to solve the problem
problem is:
my wave2 mobile was updated to BADA 2.01107221647LISS8530XPKG6 with help from one private mobile service centre he made all this update.(now i cant contact him)
now problems i face is
1.
when i use google search the phone software crushed and shows some command lines like window as below
"" page:1/10 <Pi c#>
s/w version :s8530+xp+kg6
modem:Q6270B-KPRBL-1.5. 45T
SHP: VPP R5 2.1.1
BUI L D HOST: S1-AGENT06
BUI L DAT:2011/07/22 16:36:29
APP DEBUG LEVEL : 0
ASSERTION ON_REQUIRE: FALSE FAILED
.(FILE APPMGRPLUS.CPP, LINE 580)
ADD SUB APP TO APP LIST FROMEH: HPARENT(WIDGET[88]) IS NOT A VALID APP!!!
BMSETPOWERSAVEMODE: 2 CPU POWER SAVING MODE CONTROL BM_PSM_SYSTEM IS ENABLED(LCD CONTROL SKIP. CLLED AT "DBGCOREDUMP.C"
:998
BMSETPOWER SAVE MODE: 2 CPU POWER SAVING MODE CONTROL BM_PSM_SYSTEM IS ENABLED(LCD CONTROL SKIP. CALLED AT "DBGCOREDUMP.C":998
BMSETPOWERSAVEMODE: 2 CPU POWER SAVING MODE CONTROL BM_PSM_SYSTEM IS ENABLED(LCD CONTROL SKIP. CALLED AT "DBGCOREDUMP.C" :998
BMSETPOWERSAVEMODE: 2 CPU POWER SAVING MODE CONTROL BM_PSM_S
to exit
press 0 for 2sec ""
and after pressing the menu button the phone restarts in to " UPLOAD data to pc " screen to restart needs a battery pull out
2.
to solve this i tried to flash a bada 1.3 or ELITE 2.0 ROM using multiloader[downloader V5.56] but here ends up with a problem as below
Download Start Ch[0]
BootLoader 1703.9KB OK[0.8s]
ERR : Dbl Erase
I dont know HOW TO FLASH ANOTHER ROM OR FRIMWARE right now
please help me to fix this
Thanks i advance
Go to download mode
Then reflash
Make sure before flashing that drivers for bada 2.0 is installed
If u get the above error again, just click port search again and hit download
XPKG6
Click to expand...
Click to collapse
One of the OLDEST bada 2 Firmware...
Try to flash maybe India INU Version...
http://forum.xda-developers.com/showpost.php?p=24443694&postcount=138
Use latest Multiloader:
5.67
Best Regards
firegun said:
Hello frinds please help me to solve the problem
problem is:
my wave2 mobile was updated to BADA 2.01107221647LISS8530XPKG6 with help from one private mobile service centre he made all this update.(now i cant contact him)
now problems i face is
1.
when i use google search the phone software crushed and shows some command lines like window as below
"" page:1/10 <Pi c#>
s/w version :s8530+xp+kg6
modem:Q6270B-KPRBL-1.5. 45T
SHP: VPP R5 2.1.1
BUI L D HOST: S1-AGENT06
BUI L DAT:2011/07/22 16:36:29
APP DEBUG LEVEL : 0
ASSERTION ON_REQUIRE: FALSE FAILED
.(FILE APPMGRPLUS.CPP, LINE 580)
ADD SUB APP TO APP LIST FROMEH: HPARENT(WIDGET[88]) IS NOT A VALID APP!!!
BMSETPOWERSAVEMODE: 2 CPU POWER SAVING MODE CONTROL BM_PSM_SYSTEM IS ENABLED(LCD CONTROL SKIP. CLLED AT "DBGCOREDUMP.C"
:998
BMSETPOWER SAVE MODE: 2 CPU POWER SAVING MODE CONTROL BM_PSM_SYSTEM IS ENABLED(LCD CONTROL SKIP. CALLED AT "DBGCOREDUMP.C":998
BMSETPOWERSAVEMODE: 2 CPU POWER SAVING MODE CONTROL BM_PSM_SYSTEM IS ENABLED(LCD CONTROL SKIP. CALLED AT "DBGCOREDUMP.C" :998
BMSETPOWERSAVEMODE: 2 CPU POWER SAVING MODE CONTROL BM_PSM_S
to exit
press 0 for 2sec ""
and after pressing the menu button the phone restarts in to " UPLOAD data to pc " screen to restart needs a battery pull out
2.
to solve this i tried to flash a bada 1.3 or ELITE 2.0 ROM using multiloader[downloader V5.56] but here ends up with a problem as below
Download Start Ch[0]
BootLoader 1703.9KB OK[0.8s]
ERR : Dbl Erase
I dont know HOW TO FLASH ANOTHER ROM OR FRIMWARE right now
please help me to fix this
Thanks i advance
Click to expand...
Click to collapse
adfree said:
One of the OLDEST bada 2 Firmware...
Try to flash maybe India INU Version...
http://forum.xda-developers.com/showpost.php?p=24443694&postcount=138
Use latest Multiloader:
5.67
Best Regards
Click to expand...
Click to collapse
Thank you so much i am trying now and will update soon
Hello Friends
Still i have a problem
when i push the download botton it show in log window as below
Download Start Ch[1]
Warring : Security fail!!
please help me to fix the problem
firegun said:
Hello Friends
Still i have a problem
when i push the download botton it show in log window as below
Download Start Ch[1]
Warring : Security fail!!
please help me to fix the problem
Click to expand...
Click to collapse
Flash in download Mode
Turn off phone then press vol down+camera+power Keys simultaneously
U should see Download Mode in red Text
yakub234go said:
Flash in download Mode
Turn off phone then press vol down+camera+power Keys simultaneously
U should see Download Mode in red Text
Click to expand...
Click to collapse
Thanks mate
But from the beginning onwards i am using the Download mode only but no luck here,
Now i am facing one more problem My phone strucks at white screen and says that
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
FOTA Engine is not installed
plz install below FOTA Eng.
(FOTA_ENGINE_VER_INFO_2.0)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
and in multiloader log it shows
Download Start Ch[2]
ERR : Diff BootLoader Nand Size 4000 20000
Lots of
firegun said:
Thanks mate
But from the beginning onwards i am using the Download mode only but no luck here,
Now i am facing one more problem My phone strucks at white screen and says that
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
FOTA Engine is not installed
plz install below FOTA Eng.
(FOTA_ENGINE_VER_INFO_2.0)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Lots of
Click to expand...
Click to collapse
I think u skipped Fota file
You should install fota as well via multiloader
ok but now i struck with this error Log
Download Start Ch[2]
ERR : Diff BootLoader Nand Size 4000 20000
still i dont know how to fix all the problems
I had the same error, but that was because I'm was flashing a S8530 firmware on a S8500??
Try to reset phone to factory settings,then download this and read carefully the instructions(you have bada 2.0 for s8500 and s8530) http://forum.xda-developers.com/showthread.php?t=1540458 , use multiloader last version(i think now is version 6.5) and you will have no errors in flashing your phone.I think in the download folder there is a PDF that shows every step you have to take to do the job.If not, Google is your friend.
Problem Fixed
Finally i got my problem fixed with the help latest Driver software
Log:
Download Start Ch[2]
Amss 12740.3KB OK[4.8s]
Apps 26476.5KB OK[11.7s]
Rsrc1 37748.7KB OK[14.2s]
Rsrc2 2884.3KB OK[1.2s]
FFS 42729.5KB OK[86.7s]
CSC 37150.7KB OK[77.6s]
SHPAPP 203243.5KB OK[291.1s]
All files complete[494.6s]
For those struct at serial port Error please try with the attached Driver setup below
And Many Thanks to the people who helped me
i'm having the error dbl erase, but only when i try to flash bada 1.2 on 2.0, i want to go back to 1.2 and yes i have full firmware. i can flash 2.0, but just can't 1.2, why's that? how can i go back to 1.2?
now i have S8500BULA3_S8500VFGLA5_SIM on, but i try the other from my country-slovenia too, it's S8500XXLA1_S8500OXFLA2_MOT .
i just don't like 2.0, many bugs and reboot on itself and lagging and so on and on.
so pls help :crying:
Hi everyone, I've posted this tutorial in the NFC hacking section of XDA but I wasn't sure of where to put it and maybe here is better, sorry if I'm not aloud to post twice, you can delete this post.
Here is the tutorial : How to use a nfc tag to unlock galaxy s3 and other android devices with nfc.
Translated from the french version : http://www.galaxys2.fr/forum/voir-t14883.html#p146889
Required:
-Anything with nfc (nfc card , nfc tag , tectiles ...)
-Be rooted
-Installed Tasker + secure settings plug-in , Widgetlocker , NFC Re-tag
-download the NFCmodSGS3_lockscreen matching your ROM here : http://forum.xda-developers.com/showthr ... ?t=1712024
-Deactivate any lockscreen in settings (even the slide to unlock one)
-10 min of time
Ready ? Let's go
1st step : Flash the NFCmodSGS3_lockscreen***** via CWM
2nd step : Lockscreen configuration
Start widgetlocker and select a lockscreen with only one function : unlock
In settings , inputs, enable the back button, in advance select the 2 last ones
3rd step: Tasker
Launch secure settings and install the helper, make sure nfc is checked.
Launch tasker and create :
New profile :
events, 3rd party widget locker , unlocked ==> if %WIFI~Off, wait 300ms , plug in secure settings password pin , enable : type the password you want to use if you forgot your nfc tag.
New profile :
event, display screen off ==> plug in secure settings nfc on
New profile:
event system boot : plug in secure settings password pin , enable : type the password you want to use if you forgot your nfc tag + condition %WIFI~Off
New profile:
event network , wifi on , plug in secure settings password pin , disable
Exit task : plug in secure settings password pin , enable : type the password you want to use if you forgot your nfc tag.
New task: (name it UNLOCK)
plug in secure settings password pin , disable
wait 200ms
input , button : back button
4th and last step : NFC-Retag
Scan your tag and add the action : tasker task : UNLOCK
In settings , mute pop ups et do not show
And you are ready to go !
Video in french on the original thread, feel free to correct my mistakes or help me improve the way this tutorial is (it's my first one)
I have a surieux prb in my screen .
If i decrease my light to min my screen start fleckering and its split to tow part one its dark without fleckering and the other with fleckering .
I do some actions:
*Start my phone to security mode -->prb still
*Flash to stock kernel --->still the same prb
*Flash stock rom-->prb still
*Try to go devleppers option and check the disable hardwar overlay ----> still the some prb .
I know that is the hardwar prb but is it the lcd prb or the mother board?? cause i play some games and my phone goes very hots and still the same prb.
Can some one help me ??
plz ???
Dear Moder Stoke ROM is possible to mod either is it possible then plz read and try to mod thanks .
1. Vivo operator Logo instant of operator name.
2. yuphoria time , battery icon , net speed meter etc all of above upper status panel with editable function look like Yuphoria 5010 .
3.One plus Lock Apps with PIN or Fingerprint inbuilt in our setting menu.
4. Vivo App clone in our setting menu.
5. Samsung S8 Navigation Bar icon .
6. Volte Video call function on this Rom.
7. Lenovo lock function PIN or Password (after put pin or password without ok or enter Unlock Phone.)
Thread closed. It seems the OP has not explained him/herself particularly well.
However - this does NOT mean others should ridicule the OP in such a vile way. Right?