Need tester for Beanstalk Rom on N8000 Tablet - Galaxy Note 10.1 General

I have compiled Beanstalk 4.4.4065 (http://forum.xda-developers.com/gal...rom-beanstalk-4-4-4065-n8013-10-8-14-t2899644) for the N8013. A user has confirmed it works on the N8010, so I am looking for someone to voluntarily test the rom on the N8000. If it works, I will compile Beanstalk specifically for it so it will show N8000 in your tablet specs rather than N8013.
Again, this is voluntary. Please make a backup first in case it doesn't boot. If something was to happen in the process of flashing, I will not be held responsible. Download links are at the bottom of the rom thread I linked above. Please PM me or get me on Hangouts at [email protected].
Thanks all!

Related

[DISCUSSION][I9300][Touchwiz][Android 4.4.4] -->back-to-n00t by arter97<--

Since Samsung stopped supporting the international galaxy S3 model (aka GT-I9300) claiming that the culprit is that it only has 1 GB RAM, so system apps cannot be run correctly, XDA Developers refused to settle down releasing the first milestone named ArchiPort, and here comes the other BIG EVENT.... :victory:
This is a discussion thread for the "back-to-n00t" project by @arter97, where latest Touchwiz Android 4.4.4 ported to the I9300 from the Korean version SHV-E210S, to keep the origional development thread clean and only development-related ...
before getting started, you must remember the what-so-called a disclaimer:
Your Warranty is now voided!
neither @arter97 nor me nor anybody is responsible for bricked devices, dead SD cards, exploded phones.
It's your choice to flash this ROM, not anybody else. If you don't know what you are doing, then i strongly advice you to do some research, or leave it until it is complete.
Also Mind that this is still Work-in-Progress
-->Features<--
**Stock Touchwiz Android 4.4.4**
**Heavily De-bloated**
**Deodexed, zipaligned, uncompressed**
**De-KNOXed**
What you need to know:
-->This ROM file contains kernel modified specifically for this ROM.
-->This ROM is heavily debloated, so it is very likely to find some system apps missing
-->This ROM does not supports any other custom kernels including arter97 kernel.
-->This is based on Korean firmware, some stuffs may remain in Korean(e.g. Dialer).
-->BusyBox or Superuser is not included!
For more info head to the origional development thread
Download:
V1
V2
please do not make mirrors unless you have asked @arter97
-->Changelog<--
V1:
initial release to XDA-Developers...
V2:
RIL fixed (SMS and signal strength now fully functional)
Fixed Call logs being empty
Camera shutter sound control enabled
More de-bloated
Added missing /preload apps
T Roaming settings removed
Lockscreen shortcut settings added
Known issues:
Signal strength not presented properly
Sending SMS is broken. Receiving SMS works well
Notice that it was reported that using third-party apps solve the problem, please try it out.
USSD not working, keeps loading endlessly
PC cannot detect the device when connected via USB for some users (for me i have no problems!)
rare graphical glitches "graphics stuttering for 0.1 seconds."
RAM Management Problems
Bluetooth connecting issues with some devices/car kits when calling.
Call Log is always empty
ROM overview on videos
you can enjoy some videos concerning this awesome ROM here
Enjoy
Reserved
Reserved 2
sms working
as i said in the other thread, sms is working if you use a third party app from playstore...hope it helps
Richardvinyard said:
as i said in the other thread, sms is working if you use a third party app from playstore...hope it helps
Click to expand...
Click to collapse
Can you recommend one, for instance the one you are using??
Congrats!
I want to congratulate to @arter97 for his work, I'll being paying attention until stable ROM release to try it :fingers-crossedOnly one device to use, I can't permit me to lose connection :crying.
Question: I'm from chile... If I install this ROM, need to install local modem to avoid "no network" issue? (Obviously making backup of EFS before flashing).
Thanks!
Note: I can't see screenshots in official post "[I9300] [Touchwiz Android 4.4.4] back-to-n00t; Bring the LTE fun back to 3G". Please, upload more to another site!!!
Note 2: I think is the link in post that no allow me see the pictures.... No!! It's @arter97's website, error 404.
Wyneg said:
I want to congratulate to @arter97 for his work, I'll being paying attention until stable ROM release to try it :fingers-crossedOnly one device to use, I can't permit me to lose connection :crying.
Question: I'm from chile... If I install this ROM, need to install local modem to avoid "no network" issue? (Obviously making backup of EFS before flashing).
Thanks!
Note: I can't see screenshots in official post "[I9300] [Touchwiz Android 4.4.4] back-to-n00t; Bring the LTE fun back to 3G". Please, upload more to another site!!!
Note 2: I think is the link in post that no allow me see the pictures.... No!! It's @arter97's website, error 404.
Click to expand...
Click to collapse
Concerning the modem question i also have the same question asked in the development thread.
Screenshots and downloads question: i think arter's site is down for a while may be...
I am also having the same issue here when trying to download
We have to wait for arter's website to get back so i can download it and post screenshots
FYI
Mostafa Wael said:
Congratulations !!!
Hope the SMS error is fixed soon, that is a deal breaker for me sadly...
I will open a general thread for this project so we keep that thread only for development, of course if you wish
Click to expand...
Click to collapse
arter97 said:
No I think this will be enough.
Developers can contact via PM
Click to expand...
Click to collapse
belmethos said:
Lol he said no need
Click to expand...
Click to collapse
Yeah, that's my fear... I love custom ROMs, but my first experience was awful, I lost connection to network and sim was asking for PIN number... I had to send to repair my S3, only with 2 weeks of usage!!! (that occured 3 months ago) :crying:
Now, I'm using S5 Sensation ROM and I think is great, but I want to try others available developments
Greetings!
T0nyCr said:
FYI
Click to expand...
Click to collapse
Yeah i noticed now
So you advice that thread should be closed?
But I think there will be so much fuss about it later, for example after it was discovered that SMS seems to be fixed with third-party apps.
And when the KK kernel source for the korean model is released, it will be more stable... So
May be @arter97 says something about this thread. If he wants that this thread must be closed then i have no problems... I just wanted to help
I am having connection problems here so i didn't see a lot of replies in the development thread. Thanks for letting me know..
I ask all of you to donate to the developers ..
They work every day to give us a free firmware kitkat stable ...
In a few hours have succeeded with hard work to give us a firmware almost totally stable ... finally soon we will have a stable firmware "semi-official"! :laugh::highfive::good:
Sorry for english!
why can not install ?
You need to download the ROM first
yes i now but instalation aborted why?
Spluwicho said:
yes i now but instalation aborted why?
Click to expand...
Click to collapse
-Corrupted file
-Wrong or old recovery
Delete
Is this ROM Sudden Death fix patched??
As kernel indicates the battery capacity in milliamp Android system , eg have a battery of 3500mAh and 2100mAh system warns all application says that the kernel is providing this information , but the forums only talk about percentage . excuse the word as it is not my native language.
Sent from my GT-I9300 using xda premium

Alliance Rom Tester Needed

Hi everyone,
As the title says I need some experience members to Beta test Alliance Rom for the Snapdragon Note 4 (5.0 Lollipop TW Base). If possible, I need you to be experienced in your phone, I know its new =), grabbing logs, able to report any fc's that may arise or be able to run a ROM that may not be fully functional (meaning some of the custom features added) I know this is a long shot but also if you are eastern US time that would be GREAT!
Please pm me for further instructions or you can contact me on Telegram @lacoursiere18. Thanks!
Brian
PS here are some links to the S5 Rom that was recently released just in case you are not familiar to our work..
http://forum.xda-developers.com/showthread.php?t=2716535

Custom OxygenOS

Since previous development thread was closed, I've been getting a lot of pms. Everyone thanks for the kind words and for offering me help. Thumbs up for this great community.
The reason I didn't post the link was because my laptop or my upload server let me down. At least that is what I saw when I woke up.
No big deal, thought I would upload it upcoming weekend. But as we all might know, today oos 2.2.1 was released. My custom oos was based on 2.2.x, so I was thinking to rebuild this rom again based on the latest software. Meaning it will take a couple of weeks before it will be ready.
So far this briefing. If you have questions regarding this rom, for now please ask in this thread.
Link to original thread:
COSX
To the features, just add the viper4android... And try to make the files app show the root directory too.
I feel you should post ur 2.2.1 build directly when its ready..take your time and i do support what u stand for!! and if possible add network speed indicator
Since there was no answer to this on the original thread, what do you mean by theme support? Layers?
I'll be patiently waiting for your release
But, for playing purpose, are there any guide somewhere to create a moded rom from a stock rom ?
I've been looking but all i could find was from 2012
I don't think it's as simple a remove/add apks from the rom zip :cyclops:
Request
Please donot remove the stock oos camera which has manual focus iso exposure .... __/\__ please

[ROM][5.1.1]Carbon ROM for Exhibit/Ace 2e[ T599N | T599 | T599V ] [METICULUS]

CarbonDev said:
About Carbon
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonDev GitHub. and on our Gerrit CarbonDev Gerrit.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained whenever possible and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Features
All of our features can be found on our site here:
Carbon Features
Here are some screenshots:
Carbon Screenshots
Carbon Updates
Join us on these Social Media Channels to keep yourself up-to-date on all the latest Carbon news, updates, contests, and more! Join our completely open Google+ community for insider conversation with devs and other users.
Download Carbon
All Carbon downloads and further information such as features, changelog, and FAQ can be found on our website.
Carbon Downloads
Changelog
For a detailed changelog, check out the changes made each night here:
Carbon Changelog
Support
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Ask a question on our IRC channel. Connect to #teamcarbon on irc.freenode.net or click here. You'll find several other Carbon fans and usually one or more devs as well. Please be polite.
Who is Team Carbon?
Find out here:
Carbon Team​
Click to expand...
Click to collapse
These builds are for the Samsung Galaxy Exhibit and the Samsung Galaxy Ace 2e.
Models:
SGH-T599
SGH-T599N
SGH-T599V
Download: meticulus.co.vu
GApps here
Known issues:
Screenrecording locks up device. ( do not use )
Moving apps to SD does not work. Reports "not enough space" or something similar. FIXED! see here
OTG Host mode only works once per boot.
If GApps are not flashed there is a ramdom reboot issue due to issue with gps blog. Not an issue as long as you flash GApps.
Setting a govenor via "PerformanceControl" may not work due to "Usecase" control.
Offline Charger options via "Extras" do not work.
Root is disabled by default. Some options in "Extras" and "Performance" depend on root. Enable in "Developer Options"
Thanks for all your work.
Good to see you back at it on the T599.
Tried you latest. Seems to work quite well.
Thanks again.
Sent from my BN Nook HD using XDA Free mobile app
Moving apps to the SD card is FIXED! see here
New Build!
New Build: http://www.meticulus.co.vu/2016/07/new-build-carbon-lp-511-for-galaxy.html
Update released : http://www.meticulus.co.vu/2016/07/carbon-lp-511-for-galaxy-exhibit-ace2e.html
Several bug fixes...
Another Update Release: http://www.meticulus.co.vu/2016/08/carbon-lp-511-for-galaxy-exhibit-ace2e.html
Encryption fixed.
Hang at "Finishing Boot" fixed.
...
Progress on MM: http://www.meticulus.co.vu/2016/09/progress-on-marshmallow-for-codinalte.html
WOWWW you are back! I thought this phone was already forgotten. Let me try this on my old t599n with stock laggy tw 4.1.2 with internal memory for only 2 or 3 apps.
Can't wait for MM rom.
Great work and welcome back!!
Update: Hi @Meticulus , I am using this rom and I like it. I got just some little issues:
First: Is the Carbon sources updated? I ask this because i see in my language (portuguese) there are lot of words not translated (when i was on cm 12.1 in my s5 didnt face this issue), i see that the security patch is November 2015 (a bit old no?)
Second: I don't know why but i can't install facebook... it took like 5 minutes to install and then it fails with error -504 on playstore
BTW great work man, I really wanna try your CM 13 on this machine
Keep it up
If anyone is reading this, I've noticed http://www.meticulus.co.vu is down (probably for years). Is there any way to obtain the 5.11 Carbon ROM ? I have two old T599N devices that I want to "resurrect/upgrade". I've googled a lot but could not find any download links for the 5.1.1 Carbon ROM created by Meticulus for this device. I also tried searching for this in DC hubs but without success. Thank you!

Development of Android 8 ROM

Hey all you Sharp 306sh users!
I love this phone and decided to start a ROM port to Oreo 8.0.0!
To date here's what i got
1. Device tree built
2. ASOP stock rom built successfully
Here's what I need to get done next
1. Access bootloader to flash images
2. Test for vendor blobs needed so I can make the vendor tree (if required)
Your help on this would be greatly appreciated as I am just getting my feet we in this process, this is a great phone and I would love to see it updated.
Please let me know if you are interested in helping with this project!
Edit 8/6/2018: Device tree is on Github,
https://github.com/RobertCC18/sharp-306sh-rom
More to come once kernel is built!
Edit 10/12/2018:
I am uploading the first test build so I can get some help with the debug. THIS ROM IS GETS STUCK AT THE SHARP BOOT LOGO AND IS NOT READY FOR PRODUCTION DEVICES!!!!
That being said, any help and logs that you can send are greatly appreciated.
This zip can be flashed through TWRP, check the downloads section
XDA:DevDB Information
Android 8 Rom [stock], ROM for the Sharp Aquos Crystal
Contributors
RobbotCC
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Testing
Created 2018-07-15
Last Updated 2018-10-12
Great! I´ve got a 306SH model, i can be a tester... waiting for your first zip :highfive:
Awesome.
I tried this exact same thing before, but gave up soon after I couldn't diagnose what stopped my device from booting with my custom ROMs, as I could never find the logs.
It looks like you're making more headway than me, so I'd love to test it, or even just help out.
Keep on going! A GitHub would be great progress.
Update 7-4-18
Update - 7/24/2018
Recompiling Kernel with debug drivers included - current compiled kernel missing RAM Console support
Github repo coming soon!
Great! Always wanted a custom room on this phone. I can test it and try it out too
Good progress.
Make sure to keep us updated, once you have a GitHub repo, development should speed up.
I'm sure there are a few techies with this phone that would love to contribute to your ROM, myself included.
By the way, you said ASOP instead of AOSP in the original post.
Rhioun said:
Make sure to keep us updated, once you have a GitHub repo, development should speed up.
I'm sure there are a few techies with this phone that would love to contribute to your ROM, myself included.
By the way, you said ASOP instead of AOSP in the original post.
Click to expand...
Click to collapse
Thanks, whoops on the typo!
Been busy with work but hoping to upload device tree, kernel base and current build, waiting for kernel to finish building with RAM console drivers.
Update 8/6/2018
Github Created
https://github.com/RobertCC18/sharp-306sh-rom
Device tree is added, kernel coming soon!
About accessing the bootloader to flash images, I believe we've done this before.
Tewilove, the man behind rooting the 306SH managed to access it, and made a custom one to flash, if I do remember correctly.
https://forum.xda-developers.com/aquos-crystal/general/temp-root-306sh-t3129456
Worth a look.
No development in a while. We all hope you're still there.
I visited the Github and just found it to be text files and folders. Could you possibly post the WIP kernel or other vendor blobs on there,
so we have at least a basis to begin work on?
Thanks,
This is an amazing idea. My 306SH is rooted and ready for action.
Rhioun said:
No development in a while. We all hope you're still there.
I visited the Github and just found it to be text files and folders. Could you possibly post the WIP kernel or other vendor blobs on there,
so we have at least a basis to begin work on?
Thanks,
Click to expand...
Click to collapse
Yes I am still here and working on this, just haven't had much time lately. I will try to get the kernel and vendor blobs up within the next few days
Been waiting for a custom ROM for this phone. I'm ready to test it
Any update on the development of the ROM??????
Any progress?
Status Update
dzvxo said:
Any progress?
Click to expand...
Click to collapse
Hey everyone,
Sorry for the delay in development but I hit a major snag with the kernel build and am still working on overcoming it. The needed defconfig is missing so I found one that should get us close, at the very least it should allow us to see the RAM debug messages on boot failure.
Also, my internet has been to slow to upload the kernel to github but I have an upgrade and should be able to get it uploaded within the next couple days.
Please share any information that you find regarding this phone here on XDA and beyond, any info you can provide will help me get this up and running faster!
Hey, how's everything going? Any luck?
What's up with it?
Hey All,
Sorry for the delayed responses, this phone seems to be a lost cause. But I am not a quitter lol!
I am hopeing to get back into the swing if things here in the next few weeks and will post more updates and files here shortly
Current problems:
No debugging enabled
Kernel needs patched to support Android 6+
We wish you the best of luck!

Categories

Resources