Help! Hyperdrive rom (latest release) - Galaxy Note 3 Q&A, Help & Troubleshooting

i wiped all data cache and dalvik cache, then when i flash the rom there is aroma and a option to choose (full wipe or no wipe) when i choose full wipe before flashinf S5 style aroma says that failed, when i choose no wipe it completes the installation but no music app, then i try to reflash the rom there is a music app but keep crashing. what should i do?

Ask in the rom thread is what you should do.
Sent from my N9005

Nico231995 said:
i wiped all data cache and dalvik cache, then when i flash the rom there is aroma and a option to choose (full wipe or no wipe) when i choose full wipe before flashinf S5 style aroma says that failed, when i choose no wipe it completes the installation but no music app, then i try to reflash the rom there is a music app but keep crashing. what should i do?
Click to expand...
Click to collapse
Same here, been flashing every ROM possible and found that Hyperdrive always fails if you choose way too many options in Aroma.
The error I get is about symlinking and failure to do so.
Just untick some options.

nicholaschum said:
Same here, been flashing every ROM possible and found that Hyperdrive always fails if you choose way too many options in Aroma.
The error I get is about symlinking and failure to do so.
Just untick some options.
Click to expand...
Click to collapse
loooolz im about to flash this rom ,,,, thank god i found this thread before flashing the rom !!!
is there a fix or i just need to pick few options ?

3azmeo said:
loooolz im about to flash this rom ,,,, thank god i found this thread before flashing the rom !!!
is there a fix or i just need to pick few options ?
Click to expand...
Click to collapse
Cherry pick a few options, don't bloat up the Aroma installer with just everything or else it will not work.

nicholaschum said:
Cherry pick a few options, don't bloat up the Aroma installer with just everything or else it will not work.
Click to expand...
Click to collapse
hmmmm...... gonna try to hold myself loooooolz thanks bro

Cherry pick a few options, don't bloat up the Aroma installer with just everything or else it will not work.
Click to expand...
Click to collapse
Maybe that's what worked because I did a fairly minimal install and did not experience any problems.

nicholaschum said:
Same here, been flashing every ROM possible and found that Hyperdrive always fails if you choose way too many options in Aroma.
The error I get is about symlinking and failure to do so.
Just untick some options.
Click to expand...
Click to collapse
what about music app? i need it. if i flash the rom music unfortunately stopped.

Nico231995 said:
what about music app? i need it. if i flash the rom music unfortunately stopped.
Click to expand...
Click to collapse
Full wipe. Don't choose so much. Install the music app. Let it succeed.

nicholaschum said:
Full wipe. Don't choose so much. Install the music app. Let it succeed.
Click to expand...
Click to collapse
what do you mean dont choose so much? the music i want to install is the stock one.... its working to you?

nicholaschum said:
Full wipe. Don't choose so much. Install the music app. Let it succeed.
Click to expand...
Click to collapse
i tried full wipe and not choose other option but it always fail on flashing and no music app.

Nico231995 said:
i tried full wipe and not choose other option but it always fail on flashing and no music app.
Click to expand...
Click to collapse
I'll reflash hyperdrive and see.
---------- Post added at 12:25 PM ---------- Previous post was at 12:12 PM ----------
Nico231995 said:
i tried full wipe and not choose other option but it always fail on flashing and no music app.
Click to expand...
Click to collapse
Just full wiped and chose Samsung music. No problems whatsoever.
Sent from my OnePlus One using Tapatalk VIP

nicholaschum said:
I'll reflash hyperdrive and see.
---------- Post added at 12:25 PM ---------- Previous post was at 12:12 PM ----------
Just full wiped and chose Samsung music. No problems whatsoever.
Sent from my OnePlus One using Tapatalk VIP
Click to expand...
Click to collapse
not working sir...

Nico231995 said:
not working sir...
Click to expand...
Click to collapse
Try redownloading Hyperdrive and matching it's MD5 up, it's probably messed up.
https://www.androidfilehost.com/?fid=95747613655042039
Check my signature - Systematic guide - to see how to check for MD5s.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

[HOW TO] install CyanogenMod/MIUI to your phone

[CyanogenMod/MIUI]
This assumes that you are running stock froyo or gingerbread ROM:
1.first make sure your phone is rooted.If not,come here for detail.Specially for GB rooting,come here for tutorial.
2.download and install droid2bootstrap(attachment)
3.open droid2bootstrap and select install recovery
4.Install bootmenu v0.8.6. For more detail,come here
5.download CM7 All in one update.zip from here and then put it in your sdcard
6.reboot to bootmenu and then goto custom recoery
7.apply All in one update.zip(ROM package)
8.reboot to bootmenu again!
10.wipe data/cache
11.apply update again
12.reboot and everything should be OK
Specially,if you already get bootmenu v1.x.x working in your phone,you can skip step1~7.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------
[CyanogenMod]
This assumes that you are running MIUI:
1.reboot to bootmenu and then goto recovery
2.wipe data/cache
3.apply All in one update.zip(ROM package)
4.reboot and everything should be OK
Click to expand...
Click to collapse
This assumes that you are running CM7:
1.reboot to bootmenu and then goto recovery
2.wipe cache and dalvik cache in advance menu
3.apply All in one update.zip(ROM package)
4.reboot and everything should be OK
Specially,if you got some apps FC issues,first try to clear data for that app.And if you still get serious FCs,consider to make a full data wipe.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------
[MIUI]
This assumes that you are running CM7:
1.reboot to bootmenu and then goto recovery
2.wipe data/cache
3.apply All in one update.zip(ROM package)
4.reboot and everything should be OK
Click to expand...
Click to collapse
This assumes that you are running MIUI:
1.reboot to bootmenu and then goto recovery
2.wipe cache and dalvik cache in advance menu
3.apply All in one update.zip(ROM package)
4.reboot and everything should be OK
Specially,if you got some apps FC issues,first try to clear data for that app.And if you still get serious FCs,consider to make a full data wipe.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------
Questions
I have some questions ...
Firstly, with regard to the cm7 20111018-nightly v1.0, you mention that DEVTREE changed to UK2.2.2 and use CH2.6.0 kernel. Will the change in kernel appear in my phone ? (ie under kernel version)
Secondly, there is changes for the battd from uk2.2.2 (no battery jumping) Does it mean that the battery will not drop from 65% to 50 %?
Lastly, if I'm using the phone for mass storage and after i safely remove it, which is suppose to appear? ME722 or A953? (I'm from Asia region)
(I'm sorry, I cant post in the android development due to limited posts)
Thanks.
puiboy said:
I have some questions ...
Firstly, with regard to the cm7 20111018-nightly v1.0, you mention that DEVTREE changed to UK2.2.2 and use CH2.6.0 kernel. Will the change in kernel appear in my phone ? (ie under kernel version)
Secondly, there is changes for the battd from uk2.2.2 (no battery jumping) Does it mean that the battery will not drop from 65% to 50 %?
Lastly, if I'm using the phone for mass storage and after i safely remove it, which is suppose to appear? ME722 or A953? (I'm from Asia region)
(I'm sorry, I cant post in the android development due to limited posts)
Thanks.
Click to expand...
Click to collapse
1.devtree will not show.
2.Yep,it should be.At least in my daily use.
3.When you use UK devtree, it shows A953.Otherwise ME722.
Thanks to this repost I'm now using the CM7 port, thank you very much.
Sent from my MotoA953 using XDA App
Endless7 said:
1.devtree will not show.
2.Yep,it should be.At least in my daily use.
3.When you use UK devtree, it shows A953.Otherwise ME722.
Click to expand...
Click to collapse
Thanks Endless7, really appreciate it.
If there is battery jump, what advice can you give me?
Thanks
puiboy said:
Thanks Endless7, really appreciate it.
If there is battery jump, what advice can you give me?
Thanks
Click to expand...
Click to collapse
Use battery calibration to calibrate or wipe battery status in CWM.
Endless7 said:
Use battery calibration to calibrate or wipe battery status in CWM.
Click to expand...
Click to collapse
Use battery calibration to calibrate it for cm7-20111018, but battery still drop from 65% to 50% . Have flashed to the latest rom.
I'm having a problem. CM nightly does install fine and reboots but when I install droid2bootstrap and tries to boot into recovery, it does hangs on boot screen. Is there any specific directions I'm missing??
You cant use Droid2Bootstrap in CM7 or MIUI. They have integrated Bootmenu, which have included custom recovery.
ok then how to enter in recovery or Bootmenu? I'm giving a last go again :-(
Edit: I'm idiot!!!!! Cheers UFO for pointing.
After installing MIUI my Milestone2 is restarting constantly. Once installed, it worked normally. After installing several apps, it began to restart. I went back to voltage and frequency for stock. He kept restarting. I decided to start over. This time, I installed a few apps, restart stopped. After installing all the apps, To restart again. I was uninstalling apps, and it stopped rebooting. Is he related to the amount of apps, or even the amount of homescreens? I used the room (2.2.2 Argentina). MIUI 1.10.21V2. I believe that many users experienced this. Thank you.
Sorry, but I'm going to need some help to do this...
I couldn't find te CM7 All in one update.zip to download it, can anyone help me?
Sorry, I really don't know nothing about this... but I really want to try CM7
Found it?
guilhermemz said:
Sorry, but I'm going to need some help to do this...
I couldn't find te CM7 All in one update.zip to download it, can anyone help me?
Sorry, I really don't know nothing about this... but I really want to try CM7
Click to expand...
Click to collapse
I'm not 100% sure and just finished reading through this whole stuff for the Milestone 2, but I think it's (as of today) the file called: "cm7-20111027-NIGHTLY-Milestone2-ICS-Stable-v2.zip". The link is always at the end of the last changelog in the code box (just scroll a little bit down).
---------- Post added at 04:40 AM ---------- Previous post was at 03:51 AM ----------
After this procedure the bootloader is still locked, isn't it?
What is now different before the leaked ROM came to us, why can we now install custom a ROM? We have a suitable kernel?
Big thanks for the hard work getting this done
noticed a few people have a problem with the USB not mounting and I'm having the same problem, quick digging around I found out when I mount as "memory card access" it connects find to the pc but unmounts the SD card and I haven't found out how to remount it yet
---------- Post added at 09:42 PM ---------- Previous post was at 09:20 PM ----------
forgot to mention going to setting>storage mount sd card is greyed out
20111027-NIGHTLY-ICS-Stable-v2
when I open Droid 2 BootStraper, only two choice can be chose,how i can install the recovery ?
I will upload a photo !
please help to fix it !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LittleKu said:
when I open Droid 2 BootStraper, only two choice can be chose,how i can install the recovery ?
Click to expand...
Click to collapse
click on bootstrap recovery and when it asks for root permissions give it, after that click on reboot recovery and it will take you to the recovery.
Good how to, i dont know how enter the recovery...
Enviado desde mi MotoA953 usando Tapatalk
BlackF09
Did you installed CM7? How was it?
Sent from my A953 using XDA App
Is there a way to backup the widgets (their positions in the screen)?
Can titanium do that? I've tried but unsucessfully.
By the way, I'm using cyanogenmod and it's awsome. Congrats endless7.
Sent from my MotoA953 using XDA App
Hello,
I'm following the steps to install CM7 on my phone - currently using "mostly blurless gingerbread" rom - but I'm getting an error message "Invalid MD5" when trying to apply the update (step 7).
Also, another question - do I need to unzip the update on the destination folder, or leave it unzipped?
Thanks in advance.

Lost Internal Storage

The other day I unlocked the bootloader, rooted and then flashed CM10.1. I then decided to go back to stock as 4.3 was rolling out. So I've reverted everything back and it is now stock 4.3. Yay!!
But I've just realised that instead of showing full storage, it's showing half. Instead of 12 GB available, it's only showing 6 GB.
Is anyone able to help solve this please?
Sent from my Nexus 7 using xda app-developers app
A some-what common issue after flashing stock images - doing this will correct it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do I need to re-root my device?
Sent from my Nexus 7 using xda app-developers app
Is any one able to explain what I need to do please?
Sent from my Nexus 7 using xda app-developers app
You flashed back to stock so you don't *need* to root. If you want to root stock then just simply flash the SuperSU zip through recovery.
https://plus.google.com/+Chainfire/posts/GjbpgDdF6Fq
Username invalid said:
You flashed back to stock so you don't *need* to root. If you want to root stock then just simply flash the SuperSU zip through recovery.
https://plus.google.com/+Chainfire/posts/GjbpgDdF6Fq
Click to expand...
Click to collapse
How do I install TWRP?
When I install from the Play Store and try to do the Factory Reset, slide the bar. Nothing happens.
This is becoming annoying!! lol
ChrisHoppyBot said:
How do I install TWRP?
When I install from the Play Store and try to do the Factory Reset, slide the bar. Nothing happens.
This is becoming annoying!! lol
Click to expand...
Click to collapse
You can also format with CWM if you have that installed instead.
Username invalid said:
You can also format with CWM if you have that installed instead.
Click to expand...
Click to collapse
My Nexus 7 is in stock condition now so I don't have that installed.
ChrisHoppyBot said:
My Nexus 7 is in stock condition now so I don't have that installed.
Click to expand...
Click to collapse
You should know how to install a custom recovery if you've flashed CM10.1 before.
Username invalid said:
You should know how to install a custom recovery if you've flashed CM10.1 before.
Click to expand...
Click to collapse
All I did in the end was to Unlock and then re-lock the bootloader.
Clear the device and set it up as new.
ChrisHoppyBot said:
All I did in the end was to Unlock and then re-lock the bootloader.
Clear the device and set it up as new.
Click to expand...
Click to collapse
That would wipe your userdata and internal storage, not your recovery or system.
Username invalid said:
That would wipe your userdata and internal storage, not your recovery or system.
Click to expand...
Click to collapse
Whatever it did, my storage is showing as correct.
Instead of 6 GB it is now showing 13 GB.

[Q] Odin Flash Failure - Advice Please

I've tried to flash my GT-I9505 using Odin and it's failed (please see screen grab below).
I used "I9505XXUBMH1-PRE-ROOTED-ODEX-FULL" from post 5 of this thread
Code:
http://forum.xda-developers.com/showthread.php?t=2250824
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A few weeks ago, I tried "I9505XXUBMGA-PRE-ROOTED-ODEX-FULL" from the same thread and that failed and locked up my phone.
Which I had to pay to get the phone re-flashed properly.
(I've used the above successfully in the past).
Now, I'm in the same position again with a failed flash and probably paying to have it fixed again.
On the phone itself, the progress bar is only 2mm long. So if I switch it off, it will probably mess everything up.
What should I do now, while it's still connected to the PC and how can I successfully flash it in the future ?
Thank you.
What firmware's currently on the phone ?
MistahBungle said:
What firmware's currently on the phone ?
Click to expand...
Click to collapse
It's 4.2.2.
I've managed to get the phone "working" again, by using "I9505XXUAME2-PRE-ROOTED-KNOX".
Which is on the same thread.
But, since I got the phone working again, I can't get WiFi to switch on. Factory reseting via Settings doesn't fix it.
All the ROMs I downloading in the past (MF8, MGA and MH1) with "ODEX" in the title from the same thread don't work.
Odin (any version), says "Not Responding" when I try them and fails to update (using Win 8.1).
0-0-0 said:
It's 4.2.2.
I've managed to get the phone "working" again, by using "I9505XXUAME2-PRE-ROOTED-KNOX".
Which is on the same thread.
But, since I got the phone working again, I can't get WiFi to switch on. Factory reseting via Settings doesn't fix it.
All the ROMs I downloading in the past (MF8, MGA and MH1) with "ODEX" in the title from the same thread don't work.
Odin (any version), says "Not Responding" when I try them and fails to update (using Win 8.1).
Click to expand...
Click to collapse
Try clearing data , cache and dalvik cache from cwm and do a factory reset in cwm
sent from my GT-I9082 using xda app-developers app
asifcheer said:
Try clearing data , cache and dalvik cache from cwm and do a factory reset in cwm
sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
Sorry, but I've no idea what you're talking about.
Simple instructions, please.
If it's for post 3: If it's the same as powering off the phone and starting it with Vol. up, Home and Power keys and resetting it that way.
That didn't for resetting the phone and the WiFi problem.
If it's for post 1, please ignore.
0-0-0 said:
Sorry, but I've no idea what you're talking about.
Simple instructions, please.
If it's for post 3: If it's the same as powering off the phone and starting it with Vol. up, Home and Power keys and resetting it that way.
That didn't for resetting the phone and the WiFi problem.
If it's for post 1, please ignore.
Click to expand...
Click to collapse
Edit:
Just to update.
I've lost all sound and I can't play any music or videos, even the Samsung material.
have u flashed a custom-recovery like cwm, Philz or TWRP?
If "clearing data , cache and dalvik cache" are new for you, plz read more about this all.
btmz said:
have u flashed a custom-recovery like cwm, Philz or TWRP?
If "clearing data , cache and dalvik cache" are new for you, plz read more about this all.
Click to expand...
Click to collapse
Thanks for the reply.
CWM
I've deleted the cache partition and wipe data/factory rest.
I can't find the "dalvik cache", I've seen a YT video about it, but it's in "advanced settings", which I don't have.
I'm rooted , SuperSU is installed.
delvik cache is under advance option of philz recovery
AND DO INSTALL THE LATEST PHILZ RECOVERY V 6.0.0.1
Clearing cache/Dalvik ain't going to fix your problem. Your sound/WiFi is busted due to that bootloader issue. You need to flash a 'WiFi fix' (non-HLOS modem) to match your current firmware/bootloader. Go to the modem thread (search; easily found) & find a non-HLOS modem to match your current firmware (and I don't mean 4.2.2 or whatever, I mean XXUA, etc, etc)
Thank you for the replies and help.
This is the WiFi Fix page http://d-h.st/users/DjeMBeY/?fld_id=16262#files
But, my current FW isn't listed (ME2), I've tried ME3 and MEA, I think those are the ones before and after ME2 (maybe wrong).
But, they don't work. I've tried them multiple times.
I'm not sure which others to try.
I'm going to pay and hopefully get it fixed today.
But, I'd still like to know how to fix it, for future use.
It will mess up again, when I root it. That is unless I just stick with "I9505XXUAME2-PRE-ROOTED-KNOX" and not try later updated ROMs which have worked in the past).
0-0-0 said:
0-0-0 said:
I've tried to flash my GT-I9505 using Odin and it's failed (please see screen grab below).
I used "I9505XXUBMH1-PRE-ROOTED-ODEX-FULL" from post 5 of this thread
Code:
http://forum.xda-developers.com/showthread.php?t=2250824
A few weeks ago, I tried "I9505XXUBMGA-PRE-ROOTED-ODEX-FULL" from the same thread and that failed and locked up my phone.
Which I had to pay to get the phone re-flashed properly.
(I've used the above successfully in the past).
Now, I'm in the same position again with a failed flash and probably paying to have it fixed again.
On the phone itself, the progress bar is only 2mm long. So if I switch it off, it will probably mess everything up.
What should I do now, while it's still connected to the PC and how can I successfully flash it in the future ?
Thank you.
Click to expand...
Click to collapse
Maybe this helps ya: HERE
Click to expand...
Click to collapse
Joku1981 said:
0-0-0 said:
Maybe this helps ya: HERE
Click to expand...
Click to collapse
Thank you.
My phone is currently at the shop, waiting to be fixed.
But, I'll try those.
Click to expand...
Click to collapse
0-0-0 said:
Joku1981 said:
Thank you.
My phone is currently at the shop, waiting to be fixed.
But, I'll try those.
Click to expand...
Click to collapse
pla report whats happend.
Click to expand...
Click to collapse
btmz said:
0-0-0 said:
pla report whats happend.
Click to expand...
Click to collapse
I'm due to collect the phone tomorrow, I received info from them today (Geek Squad at Carphone Warehouse, a company based in the UK), saying that it had been fixed.
I'm guessing they reflashed it. But no info was given on what they did.
After I get it back, I think I'll get rid of it and get a HTC One instead.
Using a custom pre rooted ROM, just seems to mess the phone up.
Hopefully there's another way for the HTC. Plus, I shouldn't need to worry about Knox.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=40778466&postcount=4
Download and flash modem for old bootloader and everything will be back to normal
Sent from my GT-I9505 using XDA Premium 4 mobile app
lazybeard said:
http://forum.xda-developers.com/showpost.php?p=40778466&postcount=4
Download and flash modem for old bootloader and everything will be back to normal
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you.

[Q] Bad orientation sensor? Missing driver?

I have done a search and can't any information specific to my problem. I am running a stock rooted ROM and even with the auto-rotate setting enabled, absolutely nothing auto-rotates. I even installed Quickpic and changed the setting within that app to bypass the phone setting and use the sensor- still nothing. Please help! Is there an apk or some other system file that could be missing? I am not a developer, just a semi-capable user.
Here is my phone info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help??
I see your software is listed as MDF are you on ATT or Virgin?
What ROM are you on exactly and how did you get there?
He's on NAE.
Sent from my SPH-L720 using Tapatalk
I didn't see you say anything about calibrating your gyroscope. Might help.
leaderbuilder said:
I see your software is listed as MDF are you on ATT or Virgin?
What ROM are you on exactly and how did you get there?
Click to expand...
Click to collapse
Meant security says MDF - haven't seen that on an NAE ROM before
Mine is on MDF.
Sent from my SPH-L720 using Tapatalk
leaderbuilder said:
I see your software is listed as MDF are you on ATT or Virgin?
What ROM are you on exactly and how did you get there?
Click to expand...
Click to collapse
I am on Sprint and here is what I did to get this ROM. It was about the 4th thing I tried and that one finally worked for me. Yes I wiped everything, I mean everything and did this update.
w7excursion said:
I didn't see you say anything about calibrating your gyroscope. Might help.
Click to expand...
Click to collapse
4.3 apparently removed the option to calibrate the gyroscope for some stupid reason.
What recovery are you using and how did you install it?
leaderbuilder said:
What recovery are you using and how did you install it?
Click to expand...
Click to collapse
Philz recovery via Odin.
I actually posted the wrong thread on how I got the ROM. The last post has been edited to reflect it. But here is the correct link.
Weird. I have the mf9 bootloader
Using Philz 6.08.9
I Odin'd the NAE modem/firmware from Unknownforce's thread.
Then have installed just about every ROM here without issues.
Only thing I do is wipe everything at least two times, REBOOT recovery then flash what ever I want. Seems something happened with your original flash/partitioning.
Might want to just try using the full NAE .tar and get all your partitions reset/fixed it's here in the dev section.
leaderbuilder said:
Weird. I have the mf9 bootloader
Using Philz 6.08.9
I Odin'd the NAE modem/firmware from Unknownforce's thread.
Then have installed just about every ROM here without issues.
Only thing I do is wipe everything at least two times, REBOOT recovery then flash what ever I want. Seems something happened with your original flash/partitioning.
Might want to just try using the full NAE .tar and get all your partitions reset/fixed it's here in the dev section.
Click to expand...
Click to collapse
I was trying to make that my last option, it's such a pain in the ass to reinstall and reconfigure everything. At least I can restore most app data via TB, but I've had too many problems in the past trying to use a TB backup to reinstall apps between different ROMs.
superflyking said:
I was trying to make that my last option, it's such a pain in the ass to reinstall and reconfigure everything. At least I can restore most app data via TB, but I've had too many problems in the past trying to use a TB backup to reinstall apps between different ROMs.
Click to expand...
Click to collapse
Well if you make a TB backup, do a full wipe and redownload all your apps fresh and then just re-install data (and missing apps) you'll surely have a MUCH smoother system!
It might take a little while longer getting everything configured. But even if it took a few hours it'd still be less than the hours and days spent trying NOT to wipe.
leaderbuilder said:
Well if you make a TB backup, do a full wipe and redownload all your apps fresh and then just re-install data (and missing apps) you'll surely have a MUCH smoother system!
It might take a little while longer getting everything configured. But even if it took a few hours it'd still be less than the hours and days spent trying NOT to wipe.
Click to expand...
Click to collapse
TRUDAT!!
I'm going to hold out until this weekend and hope that someone has a fix. Thanks for trying man! *button clicked*

Screen customization Problem

Hello , from the very first day I have upgraded my Yu from kitkat to lollipop, I'm facing this strange & unique issue . I customized my homepage with my apps that I use in regular basis for quick access . But every time I reboot or switch on the device the customization gone right away , only some specific apps stays. Kindly take a look at the images I have given below & HELP me please . I would like to mention that I have already tried by changing themes but still facing the same problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HELP anyone
Are you on stock rom? Is that google launcher or stock launcher? Try changing launchers and see if issue still exists.
Sent from tomato using Tapatalk
roy92 said:
Are you on stock rom? Is that google launcher or stock launcher? Try changing launchers and see if issue still exists.
Sent from tomato using Tapatalk
Click to expand...
Click to collapse
Hello , yes I'm on stock rom with stock launcher . how to change launchers & which one you recommend ?
soumyadeepbshn said:
Hello , yes I'm on stock rom with stock launcher . how to change launchers & which one you recommend ?
Click to expand...
Click to collapse
Download google now launcher from play store. See if the problem still persists. Once u install it u will see a home menu appear under personalization in settings. U can switch launchers from there.
Sent from tomato using Tapatalk
roy92 said:
Download google now launcher from play store. See if the problem still persists. Once u install it u will see a home menu appear under personalization in settings. U can switch launchers from there.
Sent from tomato using Tapatalk
Click to expand...
Click to collapse
Thank you bro , I'll try it & let u know.
Its a compactbility issue!
Most of the time everyone gets some compatibility problem when they upgrade to cyanogen 12 with dalwik cache, normal cache, app datas of some apps especially launchers.
So what is the cure. Boot into recovery, clear cache. If that does not work, try a full wipe and factory reset.
It will surely solve you issue!:good:
Abhiram Shibu said:
Most of the time everyone gets some compatibility problem when they upgrade to cyanogen 12 with dalwik cache, normal cache, app datas of some apps especially launchers.
So what is the cure. Boot into recovery, clear cache. If that does not work, try a full wipe and factory reset.
It will surely solve you issue!:good:
Click to expand...
Click to collapse
Hello bro , I hope your process will solve this issue , kindly guide me step by step.
another question if I full wipe or factory reset my device , will all the apps , games & pics be gone ?
soumyadeepbshn said:
Hello bro , I hope your process will solve this issue , kindly guide me step by step.
another question if I full wipe or factory reset my device , will all the apps , games & pics be gone ?
Click to expand...
Click to collapse
If you factory reset your phone you will wipe your data ie your apps, games etc. But the files in SDcard would remain there. It is better to take a backup ( copy files to computer)
Steps
1) Power off your phone.
2) Press vol+ , vol- and pwr button together. When scree lits up release pwr button. Then after 2 sec or so you will see cyanogen recovery pops up.
3)By using touch screen touch wipe cache.
4)select yes
5) Select reboot your phone.
Look if the problem is solved.
If not
1) Do steps till 2 in last steps.
2)now you r on cyanogen recovery. Select Wipe data/factory reset.
3)Select yes
4)Reboot
Your apps will be wiped up and your problems will be solved!
Hit thanks if I helped you in any way
!!!

Categories

Resources