Help please! I flashed an S5 port ROM onto my Note 3 which ran well, then I decided to go back to stock and tried to flash the latest stock Telstra (Australia) ROM via Odin and got weird process failed errors after first boot on my N9005 model.
Decided to try a custom ROM again which loads OK, but the phone isn't right. It doesn't respond correctly when I press the power button, and when it does, I swipe to unlock but 80% of the time it doesn't respond. It also seems to randomly vibrate every now and then. Something is really screwed up with it. I've tried flashing the latest SweetRom and also the S5 port I had on there before but they both have the same issue. Camera isn't working properly, the app loads but doesn't show an image and eventually says "media server failed. camera needs restart". This is on the S5 ROM
Did flashing the S5 ROM update something on the phone to a newer version which I've screwed up trying to go back to the Telstra ROM? I am doing a full wipe of cache/system/dalvik before flashing as well. The stock ROM is completely unusable, I can't proceed through the setup wizard because I get an endless loop of process failure error prompts. With custom ROMs I can at least get through the setup wizard but the phone isn't functioning right.
Video I recorded below after a clean flash of SweetRom which should make the issues easier to understand,
So I've just done some experimenting and flash an AOSP ROM (Liquid Smooth) and have NO issues, even the camera works perfectly. Phone locks and unlocks instantly. I'm completely stumped as to why this is only happening on Samsung ROMs
This has been fixed, I flashed N9005XXUGNG1_N9005OXAGNG1_N9005XXUGNG1_HOME.tar.md5 via Odin and my phone is working perfectly now
Related
What I want to do is install a stock non rooted rom, kernel, and recovery. I am not sure how to change recovery to stock either is it like flashing a rom? Please give me some links for these I can't seem to find them, besides the stock kernel I found that.
----------------------------------------------------------------------------------The reason I want the above is bellow, if it matters.-----------------------------------------------------
My phone is about 95% broken.
Before, every rom/kernel combination would randomly restart, it was my phone it self I believe.
I went to a stock rooted rom, but then it restarted, and my lock screen worked, yet my home screen was black all i could do was slide my status bar down.
After that i restarted my self and then it got stock forever on the screen where it says Samsung galaxy s4.
The 5% working part is my recovery, for the most part.
I keep having to do a full wipe, not just system wipe otherwise it says error unable to mount preload or i/o or a few other things, I have to system wipe before every rom attempt.
I tried several popular roms such as sacs and triforce and a few other roms and all the kernels also.
The phone will turn on, work for a little normally, then crash again and go into the infinite loading screen where is simply says galaxy s4.
This phone is only 3 months old, so I want to take it back to sprint being completely stock so they give me a new phone.
I need links to files I need, and if i am forgetting to change anything back to stock please let me know. Thank you.
I replied to you in the newbie thread, but to return to complete stock download the latest firmware from here: http://www.sammobile.com/firmwares/ and install it with odin. Do a factory reset before and after install to make sure you have cleared out what ever is causing your problems. After this process you will be completely stock and unrooted. If you are still having problems after this it is probably hardware related.
Hi all,
I recently installed the newest build of Slimbean. I am having a few issues: I am unable to play any media... Music, videos (youtube). My phone app does not work. I cannot receive nor send any calls. And my phone produces no sounds at all.
I tried installing build 7 to see if it was an issue with the build I was using... didn't help.
Internet and wifi work without any problems.
Galaxy S4 i337m
Baseband: I337MUMUAMDL
Version: Slim-4.2.2.build.7-OFFICIAL
Build #: slim_jfltecan-userdebug 4.2.2 JDQ39E eng.blk_jack.20130706.15730 test-keys
Any ideas?
Thanks in advance
Update: Any ROM I install... Phone and sounds do not work.
Talabis said:
Update: Any ROM I install... Phone and sounds do not work.
Click to expand...
Click to collapse
I'd Odin back to stock and see if you still have the issue. If you do it's a hardware issue.
jd1639 said:
I'd Odin back to stock and see if you still have the issue. If you do it's a hardware issue.
Click to expand...
Click to collapse
I did just that... But it's a bit of a story.
I had just fixed another problem I was having yesterday. Was getting stuck at the S4 splash screen right after powering on the phone. The problem was caused by TWRP 2.6 and formatting /data partition. Long story short, I installed CWM and used it to do a full wipe/format of partitions and then was able to install ROMs, restore backups without issue.
So today, since everything was working, I decided to flash a new custom ROM (which I installed) and the MG1 radio. Wasn't having any luck with the radio. Finally, I was able to flash a radio via mobile odin, but then I soft bricked my phone. Got stuck at the S4 splash screen (same issue I had yesterday, but this time, a different cause). So was troubleshooting it all day. Tried to go back to stock, no luck. Tried to restore the stock backup I had, no luck. Only thing I could do was install custom ROMs at this point to get into my phone (i.e. Slimbean, FoxHound, etc...). But, at this point, although I could boot into Android, I had no sound at all and couldn't play video. So after hours of trial and error, I installed CWM again (replacing TWRP 2.5.0.2), did a full wipe/format and tried to install a stock ROM. No luck. Still was hanging at the S4 splash screen. Then I tried to install this ROM again which I had luck with in the past; |ROM| |★VLUAMG1★| |CANADIAN||i337M||STOCK||ROOTED||July.26.13|. But his instructions said to install a wifi fix or fear soft bricking my phone. So I installed the wifi fix, but selected the wrong file (I know, stupid. Done a lot of stupid **** in the past couple days with this phone). Now, after the phone rebooted, I would see the S4 splash screen for a split second, and it would auto load into download (odin) mode. Couldn't get into recovery at all. So then I decided to flash one of the stock ROMs I tried earlier that didn't work, but this time, SUCCESS!!!!! Phone was booting and all sounds worked. I could make/receive phone calls as well... Everything seems to be working fine now. I find it funny that flashing a wifi fix that I shouldn't have seems to have fixed my issue in a sense. Since it allowed me to successfully flash a stock ROM. So I am making a backup of the stock ROM and will decide what I'm going to do from here.
Holy goalie!!! It's been a very vexing couple of days.
Nice that you got it all worked out, I've found out that if your "status" is custom, it will sometimes give you problems when flashing a "stock" rom via odin.
So what I always do when reverting back to the stock rom, I use triangle away to clear the flash count and make my phone back to "Official". If you want the steps to do this, let me know, it's not hard, but there are crucial steps to get this right!
JP
Hey guys, so I've had my Aussie Telstra Note 3 (SM-9005) for just under a month, rooted it with Knox 0x1, installed TWRP 2.6.3.5 and have tried out a few custom ROMs - all went fine. (Last ROM that worked properly was Foxhound 1.0.)
That is until I flashed X-Note Transformer Edition (MJ7). I flashed this through TWRP 2.6.3.5, everything was successful and standard as any other flash, rebooted into the ROM only to find a message saying "Can't play this video" on the very first Interactive Tutorial (Language Select) page. This message appeared multiple times, then more messages saying the system has crashed. Also, everything is extremely slow and barely anything works - including sound, camera, settings, etc. Also Wifi detects networks but cannot connect to them (system crashes). Any time I try to do anything settings related the system bootloops, and I cannot get a mobile signal at all.
Now here's the weird thing, I thought it was just an issue with the ROM not being compatible, so I rebooted to recovery, tried to reflash the previously-working Foxhound 1.0 ROM - SAME ERRORS. Tried a full wipe/format/rm -rf - and install stock ROM from zip - SAME ERRORS. Downloaded the completely stock Telstra Odin ROM, flashed through Odin successfully - SAME ERRORS. Tried to restore EFS (It said successful) - SAME ERRORS... hope you can see where I'm going with this. I've also tried CWM, flashing with different versions of TWRP, full wipe before installing any ROM, etc. tried basically anything I could find on xda without any luck - the ROMs all boot up, but as soon as they load it pops up with the same "Can't play this video" message and everything starts locking up.
This has me really worried since I tripped Knox at the very beginning before Root de la vega, I'm only hoping whoever Telstra use to fix these doesn't care about the counter.
I have literally spent two days without sleep trying everything to fix this and completely failing, so If anyone could help me out I would be forever in your debt, cheers.
zuuus said:
Hey guys, so I've had my Aussie Telstra Note 3 (SM-9005) for just under a month, rooted it with Knox 0x1, installed TWRP 2.6.3.5 and have tried out a few custom ROMs - all went fine. (Last ROM that worked properly was Foxhound 1.0.)
That is until I flashed X-Note Transformer Edition (MJ7). I flashed this through TWRP 2.6.3.5, everything was successful and standard as any other flash, rebooted into the ROM only to find a message saying "Can't play this video" on the very first Interactive Tutorial (Language Select) page. This message appeared multiple times, then more messages saying the system has crashed. Also, everything is extremely slow and barely anything works - including sound, camera, settings, etc. Also Wifi detects networks but cannot connect to them (system crashes). Any time I try to do anything settings related the system bootloops, and I cannot get a mobile signal at all.
Now here's the weird thing, I thought it was just an issue with the ROM not being compatible, so I rebooted to recovery, tried to reflash the previously-working Foxhound 1.0 ROM - SAME ERRORS. Tried a full wipe/format/rm -rf - and install stock ROM from zip - SAME ERRORS. Downloaded the completely stock Telstra Odin ROM, flashed through Odin successfully - SAME ERRORS. Tried to restore EFS (It said successful) - SAME ERRORS... hope you can see where I'm going with this. I've also tried CWM, flashing with different versions of TWRP, full wipe before installing any ROM, etc. tried basically anything I could find on xda without any luck - the ROMs all boot up, but as soon as they load it pops up with the same "Can't play this video" message and everything starts locking up.
This has me really worried since I tripped Knox at the very beginning before Root de la vega, I'm only hoping whoever Telstra use to fix these doesn't care about the counter.
I have literally spent two days without sleep trying everything to fix this and completely failing, so If anyone could help me out I would be forever in your debt, cheers.
Click to expand...
Click to collapse
What was the last version of firmware flashed?
You might need to flash the gsm modem for that firmware version to get it to work especially considering you have bootloops and no reception.
You might also need to use Megawipe to clear any errors that stay on your device after flash.
ultramag69 said:
What was the last version of firmware flashed?
You might need to flash the gsm modem for that firmware version to get it to work especially considering you have bootloops and no reception.
You might also need to use Megawipe to clear any errors that stay on your device after flash.
Click to expand...
Click to collapse
Hey mate, last version of firmware was the Stock Telstra SM-N9005 / TEL ROM I found on www . sammobile . com/firmwares/2/
I have tried at least 10 different ROMs with no luck, every single one does the same thing.
I did send it off to Telstra to try for a repair, they sent it back to me unrepaired due to nothing to do with the software but a 1/4mm scratch my keys made in the chrome plastic around the edge with the words "unable to be repaired due to physical damage" with a little sticker pointing to the scratch. ****ing ridiculous if you ask me.
Honestly I don't know all that much to do with the modems and csc's so it might be that causing my problems but I have tried a bunch of different ones without any change.
At my wits end here, phone is just over 30 days old and I can't use the damn thing.
try odin back to stock, then use kies to "emergency firmware restoore" Kies can be a life saver in some situation, make sure you use beta 3 version
Trying to fix my friend's S4 since it is having a lot of issues. He had successfully rooted it, installed a CWM recovery, and tried to flash a custom ROM, however it did not work for some reason, so he flashed stock firmware and now there are multiple issues with the phone.
Wifi will not turn on, when it is turned on the slider immediately slides back to off.
Videos will not play, the video player crashes
When receiving a call, the phone freezes
Phone isn't recognized by USB
I reflashed stock firmware via Odin, but the issues are still the same. Not sure what the cause of all these issues are. Does the bootloader need to be unlocked or something before flashing a custom rom?
The phone is an i337m on Rogers
Try doing a data factory reset after you flash the stock firmware with ODIN.
Hey guys, I've encountered a thorny problem on my wife's N910T3, and am running out of ideas about what this could be... so, could really use some help.
Some background: The phone's been working fine for over a year of ownership, mostly on the stock ROM, which gets pretty laggy at times. A few weeks ago I installed a custom ROM (the Acapolypse-X N7 port) to improve performance, and for the past few weeks it's been working perfectly fine on the custom ROM no problem.
Today, when my wife went to check Twitter, the phone crashed and started bootlooping. I had seen a similar issue on my Note 3 before (which turned out to be a specific issue with the kernel I was using), so I figured I would just go into recovery, flash a different kernel or at worst, do a clean install of the ROM.
That's when things started getting weird: The phone would crash while INSIDE recovery during ROM installation (I've never seen a phone crash inside recovery before...) After failing to successfully flash a ROM or, even in cases when it succeeds, fails to boot, I decided to do a full flash back to the latest unmodified stock ROM (since I couldn't find an ODIN-flashable image to download, I used Samsung Kies for this - typically this resolves any kind of left over from previous installations).
On the first attempt, it succeeded - the phone booted into the stock ROM and I was able to start customizing settings. Figuring the issue has been resolved, I went ahead and attempted to root by flashing TWRP through ODIN, and that's when the phone went back to rapidly bootlooping again (it reboots every 2 seconds, I can't even get into recovery when this is occuring). The only way I can return to Recovery is by flashing it again in ODIN (typically this trick will only work once; upon rebooting the phone after that it is prone to start bootlooping again).
Based on the symptoms I suspected the NAND going bad. However, I receive no emmc read/write errors during flashing - all write operations in ODIN results in success and my friend even ran a full storage check via ADB and this phone just doesn't seem to have any bad sectors (I almost wish it were since that would resolve the mystery).
Anyone have any ideas what may be the problem? I have a decent amount of experience installing custom roms on my phones and troubleshooting installation issues, but I've never seen anything like this (crashing/bootlooping directly inside recovery).