This is all guide with bug fixing on minicm7 2.1.X
Screen Cut:
Only in CWM/CWR
NMEAListener:
I think NMEAListener is GPS
I found that gps.conf is europe settings
since that i have no problem with it
for non-europe residence Here Patch
Compass:
Wait till nAa fix
Video Recording Lag:
did you experience this
use this file Download
Auto Brightness:
use this tutorial
Code:
1. disable auto brightness first in display
2. go to cm settings --> display --> automatic backlight --> choose use custom and allow light decrease
3. tick edit other level
4. set number of levels to 13
5. look at this pic [URL="http://attachments.xda-developers.com/attachment.php?attachmentid=874309&stc=1&d=1327627892"]Here[/URL] And [URL="http://attachments.xda-developers.com/attachment.php?attachmentid=874311&stc=1&d=1327627892"]Here[/URL]
6. enable auto brightness in settings (not cm)
7. restart
8. enjoy
Android market app won't show up:
clear data on app settings
Just use recommended tweak:
Non-Recommended tweak make ur phone less stable
Recommended:
SuperCharger
Ram Manager / PRO
Juwe Ram's script
Etc...
Non-Recommended
Build.prop tweak
init.d tweak
IPV4/IPV6
Etc...
End of first post continued in 2nd post
Guide for Minicm7
Notice ADW launcher Lag use this settings:
Code:
1) Screen Preferences - Desktop scrolling speed - set to something low-ish like 150-200, default settings are just plain moronic here. Desktop overshoot should be fine at 30 or 40.
2) Drawer Settings - Horizontal Drawer definite on (this is far superior to the scrolling drawer if you have more than a few apps, and feels much smoother).
3) Drawer Settings - Zoom effect speed - 400 is a decent setting, default was way too high.
4) Drawer Settings - Columns/Rows - 4x4 is a nice setting for portrait, if you don't like a crammed screen.
5) System Preferences - Wallpaper Hack - check this. If you have issues, change wallpapers to something of a sane size.
6) System Preferences - Use Screen Cache - check this.
7) System Preferences - Scrollable Widget support - you should start with this unchecked. Only check it if you have issues with some
Make ur phone fast without tweaks?
here my perfomance settings
Go to CyanogenMod Settings --> perfomance settings
Code:
1.) Set compcache ram usage to 18%
2.) Enable use jit
3.) Disable Surface Dithering (optional)
4.) Enable 16bit transparency
5.) Enable Allow purging of assets
6.) VM heap size 48mb
7.)
SDcard cache size 1024kb Class 1,2
SDcard cache size 2048kb Class 3,4
SDcard cache size 3072kb Class 4,5,6,7,8
SDcard cache size 4096kb Class 9,10
Go to CyanogenMod Settings --> perfomance settings --> cpu settings
Code:
1.) Available gorvernor set to smartassV2
2.) Min Cpu frequency 245mhz
3.) Max Cpu frequency 691mhz+ (optional)
4.) Set on Boot
Make minicm7 more battery save?
here my battery save settings
Note: this settings overwrite "Make ur phone fast without tweaks"
Go to CyanogenMod Settings --> perfomance settings --> cpu settings
Code:
1.) Available gorvernor set to smartassV2
2.) Min Cpu frequency 19mhz
3.) Undervolt
4.) Set on Boot
final step: Delete Unused App
Extra Section
Coming Soon
End Of My Post
LtHuNTer_StepheN said:
Don't use any tweaks:
tweaks make your phone fast but less stable
and don't use xloud and mobile bravia
they are fake
Click to expand...
Click to collapse
+1 10char..
I agree with other settings, but would you mind explaining why VM heap size is 48? I've read that 32 is better in the FAQ thread of minicm7, and 2048 sd cache cause hiccups while playing music in lower class sd cards, if you can, try to edit some things for lower class cards and higher class cards, for lower class cards 128 sd cache is better and doesnt cause hiccups, just a suggestion . On the other hand, I will try your CPU settings, the smartass v2 settings with min 248mhz and 691mhz, 691mhz is indeed the most stable for nAa kernel. BTW I use tweaks without any stability issues, supercharger v8 and sometimes ram manager pro.
This is the thread that I have read:
forum.xda-developers.com/showthread.php?p=17648469
hixvolnutt said:
I agree with other settings, but would you mind explaining why VM heap size is 48? I've read that 32 is better in the FAQ thread of minicm7, and 2048 sd cache cause hiccups while playing music in lower class sd cards, if you can, try to edit some things for lower class cards and higher class cards, for lower class cards 128 sd cache is better and doesnt cause hiccups, just a suggestion . On the other hand, I will try your CPU settings, the smartass v2 settings with min 248mhz and 691mhz, 691mhz is indeed the most stable for nAa kernel. BTW I use tweaks without any stability issues, supercharger v8 and sometimes ram manager pro.
This is the thread that I have read:
forum.xda-developers.com/showthread.php?p=17648469
Click to expand...
Click to collapse
For Perfomance it's better set 48mb
this help app memory management
this heap size is usefull for HD games
Oh i forgot
i will edit it
for that tweak is already tested
what i say is
Code:
build.prop tweak
mobile bravia engine
and useless tweak
for that tweak it may increase stability
i will edit so people understand
Post Updated
Thanks
Is there any way to fix compass?the compass is somehow inverse
for auto brightness setting, how many level are you using? Ultra brightness enable or not?
Sorry, but screen cutting still exist even with bootanim enabled..especialy when in recovery..
Btw nice thread...^^v
Sent from my E15i using Tapatalk
Post Updated
LtHuNTer_StepheN said:
Post Updated
Click to expand...
Click to collapse
Oops, i'm still using nAa 08...maybe because of that...0_x
Sent from my E15i using Tapatalk
bayumahendra24 said:
Sorry, but screen cutting still exist even with bootanim enabled..especialy when in recovery..
Btw nice thread...^^v
Sent from my E15i using Tapatalk
Click to expand...
Click to collapse
i think screen cut happen with smartass v2
D E V I L said:
i think screen cut happen with smartass v2
Click to expand...
Click to collapse
Flash the new nAa-08b kerner. This fix the problem
Hi!! I have just one question. The tethering wifi always disconnects when screen turns off. I tried wi-fi settings, advanced, never sleep but does not work. Do you have other solutions? Thanks
still score highly!!!
plus avent updated kernel and rarely get screen cuts!!
so id say great rom plus kernel!!
flegga92 said:
Flash the new nAa-08b kerner. This fix the problem
Click to expand...
Click to collapse
Still using nAa 08 (havent change kernel because what i see on the changelog, the difference between nAa 08 and 08b only the screen cuts fix) with:
- Cpu freq 19-600mhz
- smartassv2 on
- undervolt on
- bootanimation enabled
No more screen cuts since my prev post.
Screen cuts SOMETIMES only appear when i'm in cwm req...thats good enough for me..
For the video lag fix,does it work with other rom which have the same problem?flash with xrec or cwm?
Hello to everyone and excuse me if my question is probably going to be dumb (for sure it's an OT so please forgive me about that) but I'm quite clueless about the issue I'm experiencing and I hope to find an advice here.
I own and X10 mini with MiniCM 2.1.6 and 2.6.29.6-nAa-08 kernel. Everyhing's fine, really a great piece of work that has put new life into my beloved X10 Mini but I'm experiencing the 'screen cut' issue that's discussed here too: it happens only with some apps (Labyrinth for example) but it happens and I'd like to get rid of this.
I don't know if it could be an issue related to the apps not being designed for Gingerbread but I don't think so because I expect something different should this be the case.
I've read that the kernel nAa-08b is intended to solve this issue but it seems (maybe I'm wrong) that it isn't suitable for my X10 mini (I've made some digging around and the latest kernel version for my mini seems the one that I've already installed while the 08b seems to be intended for the X8). I'm sure that the reply is already around here but I couldn't succeed in finding it though I've read a lot (really a lot!) of posts here and there, especially on the official thread:
http://forum.xda-developers.com/showthread.php?t=1068553
where unfortunately I couldn't post because I'm a new member with less than ten posts. Some advices? Thanks anyway!
very good guide
thanks you very mach!
post updated
sorry im busy lately
Hi. could someone please tell me if the latest version of ultimate kernel from 4pda behaves well and if there are any missing or malfunctioning features and can someone please upload it here so we can test it (I tried to make an account on 4pda but it beats me)?
So I finally managed to make an account on 4pda and have tested the v2 and v3 ultimate kernel and this is what I can tell:
-on both versions the phone seems to behave a bit better (I think apps open faster now but it might just be my imagination)
-on both versions the battery drain is much less than on stock kernel (after a full day on v2 I had 78% battery and that with normal use, not light use)
-on both versions the antutu score dropped by 12000 points (from 48000 to 36000)
-on both versions can't use speaker mode in-call (after I switch on speaker the other person can not hear anything at all, even if I switch it back off, need to end the call and call again)
On v3:
-got some random reboots
-speaker sound is much lower by default, can change the settings in Synapse to make it louder.
If you want a real custom kernel, please help supporting @AndreiLux to get his device here:
https://www.indiegogo.com/projects/note-4-exynos-development-device
Lodix said:
If you want a real custom kernel, please help supporting @AndreiLux to get his device here:
https://www.indiegogo.com/projects/note-4-exynos-development-device
Click to expand...
Click to collapse
I saw that but even if I wanted to donate (and the problem isn't that I don't want but that I don't really have the money, I am at college now so having the money to just survive on my own is kind of a problem) I don't have a card anymore and can only make one over 2 months (which is really annoying) so can't really help, sorry.
EDIT: Also about v3 of the Ultimate kernel:
-the random reboots only seem to happen on some governors
-interactive governor sucks the battery really bad, until now smartmax seems to be the only one that doesn't drain the battery like mad or cause random reboots.
Hi,
Flashed this kernel just now, and everything seems fine for me.
No random reboot, and Antutu scored 50204.
Here's some details.
ROM: WanamLite ( http://forum.xda-developers.com/note-4/development/rom-wanamlite-clean-odex-xposed-t2923266 )
With:
Governor: Interactive ( Both A15 & A7 set min frequency to 400 MHz )
I/O Scheduler: cfq ( Read-ahead Size: 1024 )
A lot of crappy system apps disabled;
Greenify with Boost mode;
Selinux Permissive;
Enabled Add Random in Synapse;
So far so good
I can talk to kernel creator, and ask any question, I "live" on 4pda also. I will try to post some updates here, but sometimes I am quite busy, and can "fall out" for some period... But feel free to ask - I will transfer your questions and his answers.
author will come to xda VERY SOON! just wait a some moment
Zer0r said:
I can talk to kernel creator, and ask any question, I "live" on 4pda also. I will try to post some updates here, but sometimes I am quite busy, and can "fall out" for some period... But feel free to ask - I will transfer your questions and his answers.
Click to expand...
Click to collapse
I am sorry for the late reply, but could you please report to the kernel author the bug about in-call speaker mode, it seems to not have been fixed yet (when I switch on speaker mode the other person can not hear me at all and if I disable it the other person hears me but even with full volume on his side the voice is really low, I have to end the call and call again for him to hear me correctly again)?
EDIT: Also all the other bugs I reported on this thread have already been fixed, just not that one.
EDIT2: By all the bugs I meant all except the in-call speaker one and the low volume one, forgot that one, the device still doesn't feel as loud as it was on stock kernel
Ranomez said:
I am sorry for the late reply, but could you please report to the kernel author the bug about in-call speaker mode, it seems to not have been fixed yet (when I switch on speaker mode the other person can not hear me at all and if I disable it the other person hears me but even with full volume on his side the voice is really low, I have to end the call and call again for him to hear me correctly again)?
EDIT: Also all the other bugs I reported on this thread have already been fixed, just not that one.
EDIT2: By all the bugs I meant all except the in-call speaker one and the low volume one, forgot that one, the device still doesn't feel as loud as it was on stock kernel
Click to expand...
Click to collapse
It is because of Wolfson audio controls. There some advanced audio decoding procedure in this kernel that causes much more detailed sound in headphones and advanced sound adjustment for headphones and built-in speaker in Synapse. It uses Wolfson DAC more effective. But it causes some audio features not working properly... Kernel creator is aware of this problem and is trying to fix it, but it is not in priority, you know... At the moment you have to choose between speakerphone and audio quality I think it is not a big deal.
new kernel with 2 versions available.. stock sound and wolfson sound.. only if someone could post the link here
cooldoc007 said:
new kernel with 2 versions available.. stock sound and wolfson sound.. only if someone could post the link here
Click to expand...
Click to collapse
Here they are.
Gogole translate of changes:
-recalibrated Samsung input_boost driver for the best smoothness / responsiveness of the interface
- Optimization flags changed to improve performance
- Governor ondemand replaced with an improved version that is compatible with the architecture big.Little
- Added a scheduler BFQ-v7r6 and installed by default
- All planners reconfigured to optimize system
- KSM updated and improved, settings displayed in the synapse
- Added a mode of USB Mass Storage (only for external flash)
- Added a mode USB keyboard / mouse (phone can be used as a full keyboard / mouse to notebooks / computers). Need activation mode in the synapse and the use of additional bend https://play.google.com/store/apps/details?id=remote.hid.keyboard.client After activation normal MTP mode is turned off, including Do not forget to turn it off when played enough.
- In Synapse adds the ability to fine-tune the Governor (including of default interactive)
- Added a huge pile of settings in the synapse
- Ported cpu_boost in default turned off to improve consumption. Those who want to - you adjust it in the synapse
- Hundreds of patches for internal optimization kernel
- The rest is in the little things that have already forgotten about
- GPU and thermo-driver are in aggressive mode, for best performance, so frequency drop downs are much less, as in stock kernels
b2rdetor said:
author will come to xda VERY SOON! just wait a some moment
Click to expand...
Click to collapse
We are still waiting
Zer0r - thx for upload v.6
Zer0r said:
Here they are.
Gogole translate of changes:
-recalibrated Samsung input_boost driver for the best smoothness / responsiveness of the interface
- Optimization flags changed to improve performance
- Governor ondemand replaced with an improved version that is compatible with the architecture big.Little
- Added a scheduler BFQ-v7r6 and installed by default
- All planners reconfigured to optimize system
- KSM updated and improved, settings displayed in the synapse
- Added a mode of USB Mass Storage (only for external flash)
- Added a mode USB keyboard / mouse (phone can be used as a full keyboard / mouse to notebooks / computers). Need activation mode in the synapse and the use of additional bend https://play.google.com/store/apps/details?id=remote.hid.keyboard.client After activation normal MTP mode is turned off, including Do not forget to turn it off when played enough.
- In Synapse adds the ability to fine-tune the Governor (including of default interactive)
- Added a huge pile of settings in the synapse
- Ported cpu_boost in default turned off to improve consumption. Those who want to - you adjust it in the synapse
- Hundreds of patches for internal optimization kernel
- The rest is in the little things that have already forgotten about
- GPU and thermo-driver are in aggressive mode, for best performance, so frequency drop downs are much less, as in stock kernels
Click to expand...
Click to collapse
Thanks a lot! Could you please create a thread for this kernel?
No more news about Ultimate kernel officially on XDA ?
Any new update for this AWESOME kernel? This is the best kernel I flashed into my note 4.
Please, keep it up! The OP could start a thread exclusively for new releases.. Thanks!
---------- Post added at 05:24 AM ---------- Previous post was at 05:17 AM ----------
BTW v.7 just came up today!
http://4pda.ru/forum/index.php?showtopic=615976&st=100#entry35517822
Upload pls pls pls !
Azcaron said:
Upload pls pls pls !
Click to expand...
Click to collapse
I can make to give you this update kernel, but, please, wait that author of this kernel updated here
BTW, i'm on it now))) In first time, works :good::good::good:
This is not the official thread - so far someone who has registration on 4pda is loading the kernel (and its other verzions) for us on available down. sides.
We are still waiting for autor, when he will start the thread here: author will come to xda VERY SOON! just wait a some moment - but thats from 13th November
Upload it pls (all variants), many thx
Btw: which option you tried?
Azcaron said:
This is not the official thread - so far someone who has registration on 4pda is loading the kernel (and its other verzions) for us on available down. sides.
We are still waiting for autor, when he will start the thread here: author will come to xda VERY SOON! just wait a some moment - but thats from 13th November
Upload it pls (all variants), many thx
Btw: which option you tried?
Click to expand...
Click to collapse
Ok, man, if you want)))
UPD. 05.12.2014
Ultimate_Kernel_v.7
-Patched to Linux 3.10.61
-Build on Linaro 4.9.3
-Rebased on updating of Samsung Source 1
-Updated RAMDisk
-Wolfson Sound Control is from v.5 version of the kernel!
-Async Fsync
-Patches from NVIDIA for best results of battery life
-New tweaks for best working in File System
-Updated some drivers
-Updated drivers for TouchScreen
-New internal optimizations and some new tweaks for the kernel
Download ( now 4 versions ):
1) Stock Sound + GPU Stock ( not OC ) - I use this one! IMHO, the +/- in this versions!!!
2) Stock Sound + OC GPU
3) Wolfsom Sound + GPU Stock ( will breaks your loudspeaker )
4) Wolfson Sound + OC GPU ( will breaks your loudspeaker )
P.S Please, sorry for my bad English:crying::angel: Translated this text with my the best of the best English language)))))
How badly it breaks loudspeaker sound? I want try it, but i want also hear my phone if someone will phone me
- for others: It means that, the caller will not hear you when you turned on the loudspeaker! Not about listening the music, videos, etc..
My "Perfect" Build v1.0 - Guide (Custom Kernel, tune, zips, apks, libs, sound, vids)
Below you will find a detailed plan on how to get the absolute most out of your Moto G 2015. I've spent countless hours testing and tuning -- coming up with the setup shown here. Its unbelievably fast and effective, with top tier battery life, and an amazing and unmatched sound system.
Requirements (all downloads listed here are found on XDA, along with their threads for support and security verification)
*Flashables* (All found on XDA)
-CM13 Based Rom (I prefer crDroid, but also CM13 Official Nightly, and Temeseks CM13)
-G-Apps Pico 6.0 (latest version. you can install higher levels of gapps if you so desire, but pico will work just fine)
-Inazuma R3 Kernel
-Optimus R6 Kernel
-PDB-ABS Tweaks v5.0 (init.d Scripts, build props, etc)
-Project Skynet Genesys TX6
-PMB SQlite3 Engine Database v5.1
-FeraDroid Engine v0.20 Beta 3 (*optional)
-Xtreme Music v7.03
-Divine Beats Dolby Atmos v5.0
-Bravia v4 and X-Reality Engine 13-16mp
*APKS* (All found either XDA or Play)
-Selinux Mode Changer (on XDA)
-Kernel Aduitor - Modded Version (on XDA - Formerly known as Singularity)
-Busy Box Pro 1.24.1-Stericson (on XDA)
-System App Remover (Google Play)
-Terminal Emulator (Google Play)
Click to expand...
Click to collapse
I would recommend that you start entirely fresh -- full wipe, then clean install the rom/kernel/and zips.
...Lets Begin!!
Initial Setup:
-Download all the required apk programs and flashable zips, as well as the latest versions of a CM13 stable ROM (I prefer CrDroid for all out speed and stability)
-Wipe (or factory reset), then clean install in this order:
a)xxxxx CM13 Stable Rom
b)Open gApps 6.0 Pico
c)Inazuma R3 Kernel
d)Optimus R6 (NOT R7!!)
e)Project Skynet Genesys TX6
f)FeraDroid Engine v0.20 Beta 3
g)PMB SQlite3 Engine Database v5.1
h)PDB-ABS Tweaks v5.0
i)Xtreme Music v7.03
j)Divine Beats Dolby Atmos v5.0
*THERE IS A MAX of 10 ZIPS in the QUEUE. After you flash the initial 10, you can flash this next one.*
k)Bravia Engine v4 and X-Reality Engine Port
It will take about 5 minutes to flash all the zips listed above, but trust me... its worth it!
-Once all zips are flashed, wipe cache/davlik, then reboot.
-Run through setup, unchecking every single option along the way.
-Once loaded to the home screen, be sure to make your SD Card portable or permanent. (I prefer portable)
Initial Tweaks/Settings
-Enable Developer Options
1)2d gpu rendering
2)animation scaled down to lowest setting
3)advanced reboot menu
4)root enable and adb
-"MORE" (below wifi and data)
6)Emergency Broadcasts ALL OFF
-Sound
1)Vibrate on Touch OFF
2)Intensity 0%
-Display
1)low brightness level
2)adaptive OFF
3)Ambient OFF
4)Live Display OFF
5)Double Tap ON
6)Sleep 30 seconds
7)Wake up on plug OFF
8)Daydream OFF
9)Battery Light OFF
-Security
1)Unknown Sources
-System Profiles OFF
-Privacy
1)Block private
2)Block unknown calls/messages
-Location
1)OFF
2)Scanning OFF
Click to expand...
Click to collapse
Install all APKs from the download list:
-Fully Install BusyBox Pro 1.24.1 from within the program.
-System App Remover (all of these are optional, but here is my personal list. 50mb, and increased battery/performance)
**audio fx, basic daydreams, black hole, bluetooth extensions, BT midi service, browser, bubbles, calculator, calendar and storage, call log backup, cLock, CM wallpapers, CM Actions, android backupconfirm, android shared storage backup, android wallpaper cropper, email, exchange services, fm radio, google backup transport, google calendar sync, holo spiral, html viewer, live lock screen service, live wallpaper picker, location services, market feedback agent, omni switch, phase beam, photo screen savers, photophase, print spooler, proxy handler, screencast, setup wizard, terminal, themes, themes provider, user dictionary, vpn dialogs.**
-Selinux Mode Changer: Set to Permissive
-Kernel Aduitor - Modded
Click to expand...
Click to collapse
After installing Kernel Aduitor, here are the settings that will provide you with the perfect balance of battery life and performance.
Again.... (Very Important Settings)
-CPU:
-1401/200mhz MaxMin
-Conservative Governor (50 Down, 85 up, 15 feq step, everything else untouched)
-Schedule Work Queues on Awake CPU's - ON
-CPU Boost 0ms
-Sync Threshold Disabled
-Input interval 0ms
-Disable ALL core's input touch boost
-HotPlug:
-Intelliplug ON
-Conservative Profile (May use Balanced as an alternative)
-Touch Boost OFF
-Hysteresis 8-10 (May use 14-16 when used with Balanced Profile)
-Threshold Value 1000
-CPU Off-Screen Max - 400 (if unused while screen off.), otherwise, use 533-800mhz if you plan on listening to music while the screen off. 400mhz will cause skipping and major lag for this purpose.
-Thermal:
-Core Control ON
-VDD OFF
-Temp Throttle OFF
-GPU:
-465/200mhz if gaming. Otherwise 310/100.
-MSM Adreno Governor
-Adreno Idler ON
--60, 10, 10 for battery favoring
--35, 20, 5 for balanced
--25, 25, 3 for performance
-Screen:
-Color Profile CUSTOM
-Red 235, Green 240, Blue 255
-Min RGB 35
-Sat Intensity 80
-Hue 0
-Screen Value 130
-Contrast - 120
-Automatic High Brightness OFF
-High brightness OFF
-Battery:
-Power Suspend Mode HYBRID (Userspace for extreme battery)
-Suspend State 0 (When using Userspace, try 1 or 2 depending on your need for battery life)
-IO Scheduler:
-Internal- 2048kb read ahead
-Option 1 and 2 (*sioplus or deadline*)
-scheduler tunables (option 1-sioplus, for super fast reads and single task use): asycn read 400, write 4000, fifo batch 32, sync read 200, write 2000, writes starved 2 (option 2-deadline, for benchmarking performance (read 200, write 2000, fifo 32, front merge 1, read 300, write 6000, starved 2
-Option 3 and 4 (tripndroid and bfq) -- for everyday, well rounded performance. Excellent playback of HD videos, extremely fast USB transfer, very effective multitasker.
-External: 512kb read ahead
--TripnDroid or BFQ
-Rotational Storage ON
-Random Entropy ON from rotational storage
-I/O Stats OFF
-RQ Affinity 1 (You may try 2 if you aren't multitasking, 1 is more balanced between performance and multitasking, while 0 is for when performance is less needed, but effeciency and error free work is required)
LMK:
-Adaptive LMK ON
-15, 20, 35, 60, 95, 140mb
Virtual Memory (VERY IMPORTANT for performance, hence I will give ranges instead of exact figures. Depending on what you use your phone for, these settings can be drastically different. The ones I use are for all out performance, low lag, and moderate multitasking)
-Dirty Ratio: 75-95
-Dirty Background: 40-60
-Dirty Expire 500-750cs
-Dirty Writeback 5000-7500cs
-OverCommit 80-100%
-Swappiness 5-25
-VFS Pressure - 20-40
-Laptop Mode ON
-Min Free 4096
-Extra Free 8192
-zRam 300-350 (Stock is 510mb. I feel that a small ramdisk is just as effecient, while freeing up a few hundred mb for more traditional purposes.)
-WakeLocks:
-wlan_rx, wlan_cntrl, and wlan OFF
-Entropy:
-64 (128 optional) Read
-128 (256 optional) Write
-Misc:
-SELinux Permissive
-TCP Algorithm CUBIC
-Vib Strength 0%
-Logging OFF
-Dynamic F-Sync ON
-OTHER:
-Check "APPLY DURING BOOT" to every section of Kernel Aduitor's App
Click to expand...
Click to collapse
Next:
-Install Terminal Emulator, and open it.
-type "su" at the command prompt, then enter
-type "ABS" (all capital!) then enter.
-You will now see a basic text menu.
-Select #1. This will check your system to make sure its ready to move forward with the tweaks.
-Back on the main menu, select option 2
-Run the following scripts: (Run individually, then return to previous menu)
--#2PDB-Booster,
--#3 PDB Junk Cleaner
--#5 PDB-BuildProp Tweaks, then run each of the following tweaks:
2- Image quality
3- GPU Rendering
5- Increase Scrolling Speed
7- Touch Smoothness
9- Internet Speed Extender
11- Fix App FC's
13- Faster boot
14- Signal Strength Extender
15- HPSA Internet Tweaks
16- Flag Tuner
17- Voice Quality Extender
19- Faster Streaming
20- Liquid Smooth UI
21- 60 Frames Per Second Enable
-Next, return to main menu, and choose #6 PDB-Profiler
-Select your primary need. I use multitasking.
-#7 Ad Blocker Enable
-#8 Internet Speed Tweaker
-#11 SqLite Optimizer
-#12 and #13 should already be activated, but if not, do so now.
-#14 SD Card Speed Tweaker
-Return to Main Menu once again and choose #4
--REBOOT DEVICE--
Click to expand...
Click to collapse
After reboot, enter the Terminal Emulator once again:
Type "su" then enter
Then type "menu" (all lower case) and enter,
After the menu appears, perform command #1 - Checks. It should return all Ok's. If not, please visit the Skynet Genesys Thread for help.
Next, run command #3, and set the mode to balanced for everyday use, battery for low performance/good battery backup, and gaming for extreme performance with less regard for battery life. After completing this step, run command #4.
On this menu, run the following commands:
#1 Xtreme Renices (Places urgent priority on principle processes)****optional*** some ROMs have difficulty with this. Heating issues possible.
#3 Scaling + (lower power use and performance during deepsleep)
#4 WiFi Sleep (allows quicker dormancy of the wifi during inactivity)
#6 KSM (Memory Mergining, Same Page Merging of data used by multiple processes)
**#7 Google Killer (*OPTIONAL* Kills Google appls for battery life extension)
#8 Touch Screen Tweak (Improves responsiveness and reactivity of the touch screen. *OPTIONAL* If the earlier ABS build prop tweak did the trick, then you can skip this one. However, if it didn't give you the results you were looking for, I'd recommend trying this one.)
#9 Netboost - Some additional internet boosting tweaks
#10 Assertive Display - An advanced display manager for Qualcomm Hardware. Its a night/day difference for those who haven't used it before. It takes ambient and live display to a whole new level. Giving you clarity and depth in practically ANY light conditions.
Click to expand...
Click to collapse
With that all said and done.
Its been a pleasure, researching all of the tweaks and tunes available. I'm sure that those who are more experienced than me have came up with better ideas, but for this hillbilly from kentucky... its the best I can do! I love this phone, and the performance it offers for budget pricing!
Sorry its so long, and probably difficult to understand. But I hope you appreciate the work I put into it. There's a few revisions I plan on making to increase battery life, with the help of xposed, greenify, amplify, wakelock tuning, etc. And I didn't really get around to talking about the sound lib and progs we installed. I can assure you, there's nothing placebo about viper4android 2.4.01, dolby atmos, xtreme music, and about a dozen or so libraries that are log proveable as working. The bravia v4 Xreality engine.... I just started using it, and haven't had time to really test it out... but it *should* give us an increase in graphic quality, especially in regards to pictures and videos. In the coming days I'll be adding a new section to further increase audio, productivity, graphics, and battery life. But for now..... this is what ya get! REMEMBER THOUGH..... SELinux MUST BE SET TO PERMISSIVE for Xtreme Music Libs to work correctly. You'll be grateful that you did!
Thank you for reading, and I hope you get as much out of it all as I did.
Have a great weekend guys! and gals!
Feel free to cherry pick, add, remove, tweak, etc. No negative talk. If you don't like my work, do your own build. But if you have something constructive to say, questions to ask, or thoughts to add.... I'd be super grateful, and pleased to read them! My goal is to get the smoothest, fastest, and longest lasting battery as possible... . blended into one neat package.
I'll have to try this when I have time. Thanks for the extensive list of tweaks and addons!
@bubbyj
Thanks mate, looks good.
Would be good that you add the links for each item we have to download.
CPU frequency doesn't go down stays at 1,4 GHz heats up my phone..
Do we have to install Inazuma AND Optimus kernels or choose one?
HelpMeruth said:
CPU frequency doesn't go down stays at 1,4 GHz heats up my phone..
Click to expand...
Click to collapse
I put the wrong entropy levels in. It should be 64-128 read and 128-256 write. That cleared it up on my end. Otherwise check your CPU settings. Down threshold 50-60, up 80-85, step 12-16, conservative gov, conservative hotplug profile, intelliplug active, touch disabled in all locations. Sync disabled. Boost 0ms. If this fails, post screenshots of kernel auditor, each section. We will correct the problem for you.
-------
Yes, the inazuma provides a few options that optimus r6 and r7 don't. And vice versa. And because optimys uses any kernel, it simply overlays its settings on top of the existing one.
R7 has 1401 oc, but loses the intelliplug hotplug. It also loses adreno idler. And has a r6 few unique features added compared to inazuma r3. So by installing r3, then dirty flashing optimus r6, you get a hybrid kernel that offers the best of both. You get all freqs from 200 to 1401, with an added 300mhz state. You get intelliplug hotplugging. You get GPU oc and under clock of 100mhz for extreme battery savings and retain the adreno idler. You get all of optimus optimizations and updates, as well as all the governors and schedulers combined. Its really an awesome kernel that results in crossbreeding the two.
Edited the original post. Made extreme renices optional, fixed entropy causing CPU loading (now 64/128 or 128/256, whichever works best for your usage). Also removed battery optimize from ABS tweaks. It works well, but may cause lags.
It works fine without skynet and abs but the moment i flash any of those two the cpu jumps ans stays at 1,4 ghz
Where do you get R6? I can't find a link only for r7
Envoyé de mon MotoG3 en utilisant Tapatalk
vinz244 said:
Where do you get R6? I can't find a link only for r7
Envoyé de mon MotoG3 en utilisant Tapatalk
Click to expand...
Click to collapse
https://basketbuild.com/filedl/devs?dev=Flashhhh&dl=Flashhhh/Optimus/Optimus-R6-Osprey.zip
here
U can use ApkPure no need gapps anymore
Any update on the kernel setup?
Can someone just send me direct links to the correct version of each flashable files I need to download? I've tried doing this myself multiple times, but once it flashes the "audio enhancer" files it starts to say "unable to mount /data" and "unable to mount /storage" in the TWRP log, and when I reboot into the device, it takes a few minutes to "optimze apps" then it just sends me to the Cyanogenmod boot screen and it stays there. I really shouldn't be asking you guys for something like this but I've had to, multiple times, wipe my data and I'm just getting a bit frustrated since I really want to try this build. Thanks in advance.
OMG man, you give me another mobile with this tutorial, thank you very much mate!!!
Jushten said:
Can someone just send me direct links to the correct version of each flashable files I need to download? I've tried doing this myself multiple times, but once it flashes the "audio enhancer" files it starts to say "unable to mount /data" and "unable to mount /storage" in the TWRP log, and when I reboot into the device, it takes a few minutes to "optimze apps" then it just sends me to the Cyanogenmod boot screen and it stays there. I really shouldn't be asking you guys for something like this but I've had to, multiple times, wipe my data and I'm just getting a bit frustrated since I really want to try this build. Thanks in advance.
Click to expand...
Click to collapse
Same thing here , i still not found any way to get all the files flashed :/
Jushten said:
Can someone just send me direct links to the correct version of each flashable files I need to download? I've tried doing this myself multiple times, but once it flashes the "audio enhancer" files it starts to say "unable to mount /data" and "unable to mount /storage" in the TWRP log, and when I reboot into the device, it takes a few minutes to "optimze apps" then it just sends me to the Cyanogenmod boot screen and it stays there. I really shouldn't be asking you guys for something like this but I've had to, multiple times, wipe my data and I'm just getting a bit frustrated since I really want to try this build. Thanks in advance.
Click to expand...
Click to collapse
Check bellow
---------- Post added at 10:08 PM ---------- Previous post was at 10:08 PM ----------
FrancyelZelling said:
Same thing here , i still not found any way to get all the files flashed :/
Click to expand...
Click to collapse
Here is the list, all of then worker in my phone, but the names that he gaves is a bit different so be careful
NOTE:
I flashed the crDroid (04-22-2016) and it make a bootloop, I tried the AICP too, same problem, the only one which worked was the Nexus Experience 10.2. If you wanna try, the link is below.
Main Post:
*Nexus Experience: http://forum.xda-developers.com/2015-moto-g/development/rom-nxrom-nexus-experience-mm-6-0-1-t3347772
*G-Apps Pico 6.0 :http://opengapps.org/
*Inazuma R3 Kernel: http://forum.xda-developers.com/2015-moto-g/orig-development/kernel-inazuma-t3320323
*Optimus R8 Kernel:http://forum.xda-developers.com/2015-moto-g/orig-development/kernel-optimus-kernel-r1-t3300877
*PDB-ABS Tweaks v5.0 : http://forum.xda-developers.com/android/software-hacking/tweak-arkaynine-boost-script-v3-0-t3120404
*Project Skynet Genesys TX6: http://forum.xda-developers.com/android/software-hacking/android-l-booster-1-soon-t3030796
*PMB SQlite3 Engine Database v5.1: http://forum.xda-developers.com/and...mod-projct-mod-boost-nitro-x-edition-t2809443
*FeraDroid Engine v0.20 Beta 3:http://forum.xda-developers.com/and...beta-feradroid-engine-v0-19-ultimate-t3284421
*Xtreme Music v7.03: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
*Divine Beats Dolby Atmos v5.0: http://forum.xda-developers.com/android/software/app-divinebeats-sound-master-phone-sony-t3274355
*Bravia v4 and X-Reality Engine 13-16mp: http://forum.xda-developers.com/and...recompeliren-bravia-engine-x-reality-t3141461
Download link:
*Nexus Experience: http://nxrom.us/motog3.html
*G-Apps Pico 6.0 ARM/6.0/PICO)
*Inazuma R3 Kernel: https://www.androidfilehost.com/?fid=24459283995305053
*Optimus R6 Kernel: https://basketbuild.com/filedl/devs?dev=Flashhhh&dl=Flashhhh/Optimus/Optimus-R6-Osprey.zip
*PDB-ABS Tweaks v5.0 :https://www.androidfilehost.com/?fid=24385658843824596
*Project Skynet Genesys TX6: https://www.androidfilehost.com/?fid=24499762635998635
*PMB SQlite3 Engine Database v5.1(will start automatically ):http://forum.xda-developers.com/attachment.php?attachmentid=3440756&d=1439715903
*FeraDroid Engine v0.20 Beta 3(will start automatically ):http://forum.xda-developers.com/attachment.php?attachmentid=3696184&d=1458938908
*Xtreme Music v7.03: https://www.androidfilehost.com/?fid=24499762636007047
*Divine Beats Dolby Atmos v5.0: https://userscloud.com/ppg965q9d4q7
*Bravia v4 and X-Reality Engine 13-16mp(The second Option): https://drive.google.com/folderview...leEc4MUVXWTdwQnFqV2kxRDcyblBpNXhELThEMGdvWmc#
The problem with skynet is the jump in entropy settings to like 2048 or so, that automatically occurs on some phones. This causes the cpu to lock in at 1.4ghz and pretty much stay there, and loading at 60-80%. I'm going to be offering a brand new build based around the AOSP roms that are popping up everywhere. I'm currently testing it thoroughly. Expect a new thread with a smoother, faster, snappier, and cooler running phone based around this new platform -- probably by the end of the week.
It will include an entropy fix with it. My current settings are 1536 and 256 (read-write) and it does great!
And just one more thing --- along with the new build I'll be offering, I'm also working on an intense battery build. I understand fully that not everyone is interested in squeezing out every last bit of performance and instead desire a usable phone that lasts much longer between charges. I've been working on it off and on for about 3-4 weeks now and have found some amazing tweaks and mods that'll accomplish that goal. The hardest part for me, is being an all out performance nut --- I lose interest in increasing battery life once the performance aspect starts to suffer. With that said, I'm going to be putting my wants to the side and focus much more on the community.
MAJOR UPDATE INFO:
It has came to my attention in the last week or so, that the latest builds of MM --- CM13 based --- DO NOT WORK WITH THE INAZUMA R3 and Optimus R6!! It will bootloop indefinetly. Only versions of CM based roms from prior to about 4/10/2016 will work with it. I've read about it on a few other threads, and tested it myself. It DOES NOT work. It appears to be a problem with the Inazuma R3 Kernel (you can view the thread to see a few people saying the kernel bootloops on the latest versions). The developer is apparently aware and is working on a fix.
As far as the 'unable to mount' /data issue, this occurs now and then with flashables. For me, the fix is to reboot twrp back into the recovery. Don't reboot system. Just reboot recovery, then continue to add your selections. The one that does it most often is the PMB SqLite3 database 5.1 --- and thats about 99% of the time. Hence, I install it at the very last.
I want to apologize for the problems that people have been having, many were my fault and I take responsibility for that. Luckily, everything is fixable and you can always return to your previous setup without issue.
AOSP Version 1.0 will be released by Friday evening.
CM13 version 2.0 will be released shortly after, with fixes to all the issues that have been brought up on here. Thank you again for point the problems out, and giving this a try. See you guys soon!
Check this tool >> http://forum.xda-developers.com/moto-g/orig-development/mod-maxopt-battery-saver-tuner-t2955539/ it does miracles to the battery life and multitasking, before flashing put your phone on airplane mode and do a nandroid backup