Device: Droid Razr M
Android Version: 4.1.2
System Information: 98.30.1.XT907.Verizon.en.US
Build Number: 9.8.1Q-94-1
Bootloader Status: Locked
Root Access: Yes
Recovery: Stock
I bought the phone used and when i got it, it was on the same firmware mentioned above, i rooted it and removed almost all bloatware apps that came preloaded with the phone and now i am obviously not able to have my OTA update done.
My plans are to flash the same stock JB firmware via RSD process and when i am done with that (having a fresh phone without root), i will either flash 183.46.10 via the same RSD process or OTA this 4.4.2 KitKat update.
My question is that can i unlock my bootloader and root the set after the mentioned KitKat update?
If Yes then please guide me to the right method to do so.
Thanks in advance.
Yes, see HOW-TO post in this section.
Make sure you get .10 instead of .15 or you're doomed.
Sent from Google Nexus 4 @ CM11
[WARNING: XDA Premium 4.0.13 lacks Signature function - do not update]
You need to rsd to .10 I am unsure if you can update from where you are too .10 by ota
.15 can not be unlocked... Or rooted without being unlocked
Sent from my XT907 using XDA Free mobile app
Yes you both are correct ..
I got my answer after a few searches myself .. [emoji18]
Just in case if any one has a similar query, see the following thread: http://forum.xda-developers.com/showthread.php?t=2880258
Related
Hi,
i've got a new Razr M, which has from factory this version of system:
98.30.1.xt907.verizon.en.us
build: 9.8.1q-94
I think about if it's possible to make towel root on this version of system, unlock bootloader with motocalypse and then flash TWRP and then CyanogenMod 11, last M8 build which is for JB.
Or it is not possible in this version of system and only way it's take OTA and then root, unlock bootloader and then Cyanogen for KK?
Thanks very much for answers.
If you want to unlock your bootloader, you'll need to update to KitKat first. Then you can apply towelroot and Motopocalypse.
Ok, thanks, as i read somewhere, there this towel root is possible on all version of Android before 4.6. But i wasnt sure about unlock bootloader.
Thanks for reply.
Flash the official Kit Kat ROM first, then hit it with Towel Root and finally use Motopocalypse app. After that, the Fastboot utility in the bootloader will indicate Status 3 or if you just boot straight back to the OS, you will be greeted by the teal warning splash screen telling you that you have effectively destroyed the warranty by unlocking the bootloader.
Sent from my DROID RAZR M using XDA Premium 4 mobile app
This is so awesome !!!
I have 2 Razr M now unlocked =)
Not the most powerful phone but The best in size and usability =)
KK Update
Has the update been patched or is it still OK to OTA? Still running 4.1.2 (9.8.1Q-78-1)?
The reason I have never heard about any updates is I have had Motorola services disabled!
Kk update can be rooted and unlocked
Sent from my XT907 using XDA Premium 4 mobile app
Yes. Android 4.4 Kit Kat update can be unlocked. I unlocked mine.
Sent from my DROID RAZR M using XDA Premium 4 mobile app
Also, it is worth a note, Towel Root WILL work with previous firmware versions, however, Motopocalypse doesn't work on all versions.
This. Kit Kat update is the only version the Motopocalypse works on.
Sent from my DROID RAZR M using XDA Premium 4 mobile app
late to the party
Hey everyone, I have a rooted locked bl JB 4.1.2 build 9.8.1a-78... I'd like to unlock pop and drop it. How do I go about upgrading to KK to towelroot when rooted? And is the exploitable version KK.10? Thanks!
jwkm360 said:
Hey everyone, I have a rooted locked bl JB 4.1.2 build 9.8.1a-78... I'd like to unlock pop and drop it. How do I go about upgrading to KK to towelroot when rooted? And is the exploitable version KK.10? Thanks!
Click to expand...
Click to collapse
Just download motoclyspe which is also by geohot its apk and it works by same way towelroot
Download motoclyspe by geohot
Install on mobile (its apk)
Press the button (I forget name of button)
jwkm360 said:
Hey everyone, I have a rooted locked bl JB 4.1.2 build 9.8.1a-78... I'd like to unlock pop and drop it. How do I go about upgrading to KK to towelroot when rooted? And is the exploitable version KK.10? Thanks!
Click to expand...
Click to collapse
Use rsd lite to flash 182/183.46.10 and do what he ^ said just make sure its .10... I'll grab the link that has all the info...
Edit... here is everything you need...
We cannot teach people anything; we can only help them discover it within themselves.
dbreezy187 said:
Use rsd lite to flash 182/183.46.10 and do what he ^ said just make sure its .10... I'll grab the link that has all the info...
Edit... here is everything you need...
We cannot teach people anything; we can only help them discover it within themselves.
Click to expand...
Click to collapse
Thanks for the valuable info you two, however, I am having trouble finding the download for 182/183.46.10
jwkm360 said:
Thanks for the valuable info you two, however, I am having trouble finding the download for 182/183.46.10
Click to expand...
Click to collapse
Here ya go
We cannot teach people anything; we can only help them discover it within themselves.
Pouring my first beer!
Can't thank enough for the help, successfully upgraded, rooted, and unlocked. Got hung up on rsd lite, had to edit xml for firmware. Other than that, smooth sailing and the beer at the party is still ice cold.
Cheers!
I am new to Razr m i have a few question.
1. Is my device bootloader unlocked
In Fastboot I can see
Device is LOCKED. Status Code: 0
2. Are there any files of razr M that i have to backup first before attempting Unlock and root. I have S4 before buying razr M as my second devices in which i had to backup the efs partitions so that's why i need to know if some backup of razr M is needed.
3.Whats the latest official firmware of Razr M. Currently my device is on 4.1.2.
Thanks
terminator1983 said:
I am new to Razr m i have a few question.
1. Is my device bootloader unlocked
In Fastboot I can see
Device is LOCKED. Status Code: 0
2. Are there any files of razr M that i have to backup first before attempting Unlock and root. I have S4 before buying razr M as my second devices in which i had to backup the efs partitions so that's why i need to know if some backup of razr M is needed.
3.Whats the latest official firmware of Razr M. Currently my device is on 4.1.2.
Thanks
Click to expand...
Click to collapse
No the M is on 4.4.2 now upgrade via ota if you can... The devices is not boot loader unlocked if it says that but you can unlock the boot loader if you upgrade it to 4.4.2... And no you shouldn't have to back anything up if you ever wanna go back to stock there's always rsd lite...if you need help finding all the links let me know there posted everywhere around here...if the ota fails let us know
Edit: I went ahead and grabbed all the links for you twrp for our device. root method for 4.4.2 Motopocalypse app for unlocking the boot loader
Sent from my XT907 using XDA Premium 4 mobile app
What he said except once boot loader unlocked there is no going back on that..
You can flash over the startup screen to give the appearance of not having it unlocked though
Sent from my XT907 using XDA Free mobile app
ezknives said:
No the M is on 4.4.2 now upgrade via ota if you can... The devices is not boot loader unlocked if it says that but you can unlock the boot loader if you upgrade it to 4.4.2... And no you shouldn't have to back anything up if you ever wanna go back to stock there's always rsd lite...if you need help finding all the links let me know there posted everywhere around here...if the ota fails let us know
Edit: I went ahead and grabbed all the links for you twrp for our device. root method for 4.4.2 Motopocalypse app for unlocking the boot loader
Sent from my XT907 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How is 4.4.2 update compared to 4.1 because I have read some bad things about 4.4 update like poor battery life. Should I unlock the bootloader first and then update or unlock it after update.
Which custom rom u would recommend to use as daily driver for better performance.
Sent from my GT-I9505
You have to update to unlock the boot loader and yes my battery life took a significant hit. I installed app ops and then disabled allot of the security location and keep awake items and battery life was alright again. No idea if there is a good choice for a 4.4 rom on this device yet but cm11 is getting close.
Sent from my XT907 using XDA Free mobile app
Dude
terminator1983 said:
How is 4.4.2 update compared to 4.1 because I have read some bad things about 4.4 update like poor battery life. Should I unlock the bootloader first and then update or unlock it after update.
Which custom rom u would recommend to use as daily driver for better performance.
Sent from my GT-I9505
Click to expand...
Click to collapse
Absolutely unlock the bootloader, absolutely upgrade to 4.4.2 , before the 4.4.4 update is live to all phones. If it is already available for you, manually flash 4.4.2 and use motopocolpyse to unlock the bootloader. You might never get the chance to unlock your boot loader again.
youtube .com /watch?v=vBUaQ8Kpji4
video guide.
PrankCallPimp said:
Absolutely unlock the bootloader, absolutely upgrade to 4.4.2 , before the 4.4.4 update is live to all phones. If it is already available for you, manually flash 4.4.2 and use motopocolpyse to unlock the bootloader. You might never get the chance to unlock your boot loader again.
youtube .com /watch?v=vBUaQ8Kpji4
video guide.
Click to expand...
Click to collapse
So there pushing 4.4.4 to the M... Where did you read this at... I was under the impression that the next ota was just going to be bug fixes and a security patch to block the root and unlock method
Sent from my XT907 using XDA Premium 4 mobile app
So I have Razr M and for some reason has been unable to update. I tried the verizon store and the guy working there tried many different things but nothing worked.
So now I am looking root and throw Cyanogen mod 11 on my phone. Only thing is I am still on Android 4.1.2 and System Version 98.15.66.XT907 since I cannot update for whatever reason.
So could anyone please point me to where I can find info on how to root this version?
Thanks for the help.
canonaac said:
So I have Razr M and for some reason has been unable to update. I tried the verizon store and the guy working there tried many different things but nothing worked.
So now I am looking root and throw Cyanogen mod 11 on my phone. Only thing is I am still on Android 4.1.2 and System Version 98.15.66.XT907 since I cannot update for whatever reason.
So could anyone please point me to where I can find info on how to root this version?
Thanks for the help.
Click to expand...
Click to collapse
You could use RSD Lite to flash the official firmware.
Use Towel Root or Motochopper(Jelly Bean Only) to root.
If you want to flash a custom ROM, you'll need to unlock your bootloader. I believe the version you are on (.66) is unlockable, so is the latest version (KitKat). If this is what you want, the information is HERE but beware that unlocking your bootloader will void your warranty.
ATTACK said:
You could use RSD Lite to flash the official firmware.
Use Towel Root or Motochopper(Jelly Bean Only) to root.
If you want to flash a custom ROM, you'll need to unlock your bootloader. I believe the version you are on (.66) is unlockable, so is the latest version (KitKat). If this is what you want, the information is HERE but beware that unlocking your bootloader will void your warranty.
Click to expand...
Click to collapse
can you please tell me how to use RSDLite to flash the offical firmware on the phone? Will RSDLite require root?
Thanks.
It does not require root... There are several guides/videos online about how to use rsd just Google it... If you have any issues with the flash let us know...
Sent from my XT907 using XDA Premium 4 mobile app
Device: Droid Razr M
Android Version: 4.1.2
System Information: 98.30.1.XT907.Verizon.en.US
Build Number: 9.8.1Q-94-1
Bootloader Status: Locked
Root Access: Yes
Recovery: Stock
I bought the phone used and when i got it, it was on the same firmware mentioned above, i rooted it and removed almost all bloatware apps that came preloaded with the phone and now i am obviously not able to have my OTA update done.
My plans are to flash the same stock JB firmware via RSD process and when i am done with that (having a fresh phone without root), i will either flash 183.46.10 via the same RSD process or OTA this 4.4.2 KitKat update.
My question is that can i unlock my bootloader and root the set after the mentioned KitKat update?
If Yes then please guide me to the right method to do so.
Thanks in advance.
Got my answer after a few searches myself .. [emoji18]
Just in case if any one has a similar query, see the following thread: http://forum.xda-developers.com/showthread.php?t=2880258
98.30.1.XT907.Verizon.en.US
Unlockable Just Use Motopocalypse.apk
Abdul.wahid9001 said:
98.30.1.XT907.Verizon.en.US
Unlockable Just Use Motopocalypse.apk
Click to expand...
Click to collapse
That build is not unlockable, it's the same as .94.1. You'll need to update to unlock.
Sent from my HTC6525LVW using Tapatalk
Just make sure you update to .10 not .15 if you update to .15 you will be without root or boot loader unlock
Sent from my XT907 using XDA Free mobile app
So, I got this phone and it's running 4.1.2 (System version 98.18.78.XT907.Verizon.en.US) and I wanted to upgrade to KitKat but when I check for updates it says it's already up to date. What do I need to do to get the KitKat update?
Droid909 said:
So, I got this phone and it's running 4.1.2 (System version 98.18.78.XT907.Verizon.en.US) and I wanted to upgrade to KitKat but when I check for updates it says it's already up to date. What do I need to do to get the KitKat update?
Click to expand...
Click to collapse
You could flash XML firmware with RSD Lite
[GUIDE][FAQ][KK] How to Root, Boot Unlock & More
Sent from my XT907 using Tapatalk
sd_shadow said:
You could flash XML firmware with RSD Lite
[GUIDE][FAQ][KK] How to Root, Boot Unlock & More
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Thanks! It worked
Even with locked bootloader?
Can I do the update to KitKat with a locked BL? I'm on the same 98.18.78 as the op and I have root on my otherwise stock 4.1.2 JB xt907.
wec777 said:
Can I do the update to KitKat with a locked BL? I'm on the same 98.18.78 as the op and I have root on my otherwise stock 4.1.2 JB xt907.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2869432
[GUIDE][FAQ][KK] How to Root, Boot Unlock & More
wec777 said:
Can I do the update to KitKat with a locked BL? I'm on the same 98.18.78 as the op and I have root on my otherwise stock 4.1.2 JB xt907.
Click to expand...
Click to collapse
yes you can update with locked bootloader, you can not downgrade with locked bootloader.
see [GUIDE][FAQ][KK] How to Root, Boot Unlock & More
I believe best option is flash VZW_XT907_4.4.2-KDA20.62-10.1_1FF.xml.zip with RSD Lite then unlock bootloader
do not use VZW_XT907_4.4.2-KDA20.62-15.1_1FF.xml it can not be unlocked at this time
WORKING!!! Thanks y'all!
sd_shadow said:
yes you can update with locked bootloader, you can not downgrade with locked bootloader.
see [GUIDE][FAQ][KK] How to Root, Boot Unlock & More
I believe best option is flash VZW_XT907_4.4.2-KDA20.62-10.1_1FF.xml.zip with RSD Lite then unlock bootloader
do not use VZW_XT907_4.4.2-KDA20.62-15.1_1FF.xml it can not be unlocked at this time
Click to expand...
Click to collapse
Flashed VZW_XT907_4.4.2-KDA20.62-10.1_1FF.xml.zip with RSD Lite; file 15 which was system.img didn't want to load & kept telling me "fail" but I did NOT exit the Fastboot mode (don't like expensive bricks), I just kept trying until it worked on a different USB port.
Got root via towelroot.apk & then unlocked bootloader using motoapocalypse.apk.
Install TWRP recovery from http://www.droidrzr.com/index.php/topic/51942-recoverytwrp-2800/
Installed my apps & made a backup.
Works like a charm; thanks!
wec777 said:
Flashed VZW_XT907_4.4.2-KDA20.62-10.1_1FF.xml.zip with RSD Lite; file 15 which was system.img didn't want to load & kept telling me "fail" but I did NOT exit the Fastboot mode (don't like expensive bricks), I just kept trying until it worked on a different USB port.
Got root via towelroot.apk & then unlocked bootloader using motoapocalypse.apk.
Install TWRP recovery from http://www.droidrzr.com/index.php/topic/51942-recoverytwrp-2800/
Installed my apps & made a backup.
Works like a charm; thanks!
Click to expand...
Click to collapse
Thank you for updating to the unlockable version and taking advantage of it. Too many people ignore the warnings that .15 is not unlockable and beg for an unlock... Not gonna happen! Happy Flashing!
Sent from my RAZR M on BlissPop Lollipop 5.0.2 from Tapatalk