Database Users

[Q] I think I soft bricked my S4

I have a Samsung Galaxy S4 SGH-I337M from Koodo (Telus). And I wanted to get the latest 4.3 android on my phone, so I installed Cyanogenmod 10.2, and flashed my phone using that. I then realised that I didn't like the new display and wanted my old phone's display and firmware.
So I then proceeded to flash my phone with my Stock firmware using Odin 3.07. My phone didn't start up normally and is stuck on the part where the phone shows the Samsung logo. I can turn off the phone and boot into download mode, and I can access the recovery using Volume Up + Home + Power button. I have also tried to us the Firmware upgrade and initialization using Samsung Kies, but that doesn't change anything. Odin recognises my device, and Kies lets me flash using firmware emergency recovery, but I cannot open the files using the directory on my computer
At Odin Mode it shows the following:
ODIN MODE
PRODUCT NAME: SGH-I337M
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
I backed up all my data prior to flashing using Cyanogenmod, so I don't care if I lose my data. (Also my constant flashing will definitely stop once I fix my phone). Is this phone soft bricked or hard bricked? How do I fix this? Thank you in advance.
Edit: I was also using Clockworkmod Recovery. AND YAY! I can actually boot into Android system recovery. Sorry, I simply was not holding the buttons correctly. Should I do a factory reset?

Try jusy volume+ and ppower then do a factory reset
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

deron37129 said:
Try jusy volume+ and ppower then do a factory reset
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I booted into recovery and pressed "wipe data/factory reset" and then pressed "reboot system now" but nothing changed when the phone rebooted.

U may have to re flash the stock kernel did double check if you have the correct firmware
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

deron37129 said:
Try jusy volume+ and ppower then do a factory reset
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Please disregard my above post. It works perfectly! Yay! Thank you:cyclops:

soft bricked s4
MegaTerminatorz said:
Please disregard my above post. It works perfectly! Yay! Thank you:cyclops:
Click to expand...
Click to collapse
Hi i have a Samsung galaxy s4 that is stuck in the samsung with a lil unlocked lock screen it will go into download mode but thats all it will not go into recovery... im having a difficult time trying to fix it. im a noob as well

camarodemon said:
Hi i have a Samsung galaxy s4 that is stuck in the samsung with a lil unlocked lock screen it will go into download mode but thats all it will not go into recovery... im having a difficult time trying to fix it. im a noob as well
Click to expand...
Click to collapse
What firmware are you on? What were you trying to do?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

Do a factory reset in the stock recovery. It'll work

Im trying fix the soft brick. Firmware mf3 I had safestrap on it as well I went to flash a ROM and it reset on me and is stuck on the Samsung logo with the unlock symbol the will go into download mode but not recovery. Thanks for any help you can give
Sent from my GT-P5110 using XDA Premium 4 mobile app
---------- Post added at 03:38 PM ---------- Previous post was at 03:29 PM ----------
I can't get into stock recovery
Sent from my GT-P5110 using XDA Premium 4 mobile app

camarodemon said:
Im trying fix the soft brick. Firmware mf3 I had safestrap on it as well I went to flash a ROM and it reset on me and is stuck on the Samsung logo with the unlock symbol the will go into download mode but not recovery. Thanks for any help you can give
Sent from my GT-P5110 using XDA Premium 4 mobile app
---------- Post added at 03:38 PM ---------- Previous post was at 03:29 PM ----------
I can't get into stock recovery
Sent from my GT-P5110 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'd recommend taking it to a best buy where they can reflash mf3 at this point.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

HiTideBlastoise said:
I'd recommend taking it to a best buy where they can reflash mf3 at this point.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
HiTide's right, this may be your best bet... I just hope your best buy is more helpful than mine.

Life Savor
Thanks for this thread you really help me out a lot. I was trying everything kies emergency recovery and everything thanks again for this thread.

hi i need help as well i soft bricked my phone and cant get into recovery mode. i have a locked one. could i odin back to an earlier os?

tshaulis said:
hi i need help as well i soft bricked my phone and cant get into recovery mode. i have a locked one. could i odin back to an earlier os?
Click to expand...
Click to collapse
What firmware are you on? You can only Odin that version or a newer one.
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
What firmware are you on? You can only Odin that version or a newer one.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
i was on 4.4.2, i have a I337 NC1 baseband

tshaulis said:
i was on 4.4.2, i have a I337 NC1 baseband
Click to expand...
Click to collapse
You need to Odin the nb1 tar file. Then do the nb1 to nc1 update to get back to where you were. Did you try to install a custom recovery, twrp or cwm? You can't do that safestrap is the only recovery you can use.
Look in the general forum for index, all things at&t.....
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
You need to Odin the nb1 tar file. Then do the nb1 to nc1 update to get back to where you were. Did you try to install a custom recovery, twrp or cwm?
Look in the general forum for index, all things at&t.....
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Ok and odin will let me go back to NB1? if i wanted to stay at nb1 could i, or would you recommend going back to nc1? and i don't know if i did a custom recovery. i did a nandroid on safestrap which i believe will be gone when i revert back to stock. but could you elaborate on your last question. and sorry im extremely new to this, as you can see i soft bricked it. well i did get hyperdrive flashed and working but the thing is that i didn't have service or wifi and i forgot to download and flash the modules that go along with it so now we are here.
---------- Post added at 02:02 AM ---------- Previous post was at 01:06 AM ----------
jd1639 said:
You need to Odin the nb1 tar file. Then do the nb1 to nc1 update to get back to where you were. Did you try to install a custom recovery, twrp or cwm? You can't do that safestrap is the only recovery you can use.
Look in the general forum for index, all things at&t.....
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
ok so i downloaded the NB1 .tar file and doing the odin restore right now. everything seems to be going according to plan. wow im so excited. ok so after this does its thing, obviously ill have a fresh new stock gs4 nb1. so is there any way i could get it back to what it was ie. apps via titanium backup or safestraps nandroid backup that i had on it?

tshaulis said:
Ok and odin will let me go back to NB1? if i wanted to stay at nb1 could i, or would you recommend going back to nc1? and i don't know if i did a custom recovery. i did a nandroid on safestrap which i believe will be gone when i revert back to stock. but could you elaborate on your last question. and sorry im extremely new to this, as you can see i soft bricked it. well i did get hyperdrive flashed and working but the thing is that i didn't have service or wifi and i forgot to download and flash the modules that go along with it so now we are here.
---------- Post added at 02:02 AM ---------- Previous post was at 01:06 AM ----------
ok so i downloaded the NB1 .tar file and doing the odin restore right now. everything seems to be going according to plan. wow im so excited. ok so after this does its thing, obviously ill have a fresh new stock gs4 nb1. so is there any way i could get it back to what it was ie. apps via titanium backup or safestraps nandroid backup that i had on it?
Click to expand...
Click to collapse
Do the nb1 to nc1 update then root will towel root. Then install safestrap and tibu. Should be able to use your nandroid and and your tibu backups.
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Do the nb1 to nc1 update then root will towel root. Then install safestrap and tibu. Should be able to use your nandroid and and your tibu backups.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
ok i will do this, and you are sure that for one my recovery will still be on safestrap and that my backup will still be on titanium back up? how is this?

[Q] AT&T Galaxy S4 4.3 Build Ending with MK2

Hi there,
Sorry, I am new to XDA.
Is there a root available for AT&T Samsung Galaxy S4 i337 which have been upgraded to 4.3 OTA. The build number ends with MK2 ?
I have looked at other threads but can't seem to find one of those straight forward tutorials for 4.3
Can anyone guide me in the right direction. Thanks.

whizzykash said:
Hi there,
Sorry, I am new to XDA.
Is there a root available for AT&T Samsung Galaxy S4 i337 which have been upgraded to 4.3 OTA. The build number ends with MK2 ?
I have looked at other threads but can't seem to find one of those straight forward tutorials for 4.3
Can anyone guide me in the right direction. Thanks.
Click to expand...
Click to collapse
somone can correct me if i'm wrong, but i dont think there is a safe way to do it right now. There is only vroot kingo, which are both unsafe as one pulls your binaries from your computer and the other pulls your IMEI and sends it to the china server.

Root for 4.3 mk2
eric303 said:
somone can correct me if i'm wrong, but i dont think there is a safe way to do it right now. There is only vroot kingo, which are both unsafe as one pulls your binaries from your computer and the other pulls your IMEI and sends it to the china server.
Click to expand...
Click to collapse
Yes there is. I just Rooted mine yesterday. Go to kingoapp.com and download ver. 1.1.5.1792. I had to run through it twice, but now I can utilize the apps I couldn't before, like SuperUser & AdBlock.

chameleonic said:
Yes there is. I just Rooted mine yesterday. Go to kingoapp.com and download ver. 1.1.5.1792. I had to run through it twice, but now I can utilize the apps I couldn't before, like SuperUser & AdBlock.
Click to expand...
Click to collapse
Isn't that the same as the Chinese vroot, but in English? Idk if I trust a commercial rooting program.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Hey I post a similar thread and u heard it was male ware so I wouldn't try it
jsimsfour said:
http://forum.xda-developers.com/showthread.php?t=2531153
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

Mal-Ware exists on vRoot, not KingoApp. It's clean and I have root.

So if i root with kingo will i be able to flash a rom? or does at&t have a locked bootloader?

pmedeiross said:
So if i root with kingo will i be able to flash a rom? or does at&t have a locked bootloader?
Click to expand...
Click to collapse
It is still locked, so no ROMs.

Dont bother with broot or kingo.I suggest chilling out patiently and wait for a safe method..NO RECOVERY AVAILABLE (BOOT LOADER) LOCKED...here is info backing what I just SAID..PERIOD!!!!!!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
---------- Post added at 08:13 PM ---------- Previous post was at 08:13 PM ----------
http://androidfannetwork.com/2013/11/08/psa-kingo-root-and-vroot-malicious/
Sent from my SAMSUNG-SGH-I337 using Tapatalk

r1tesh said:
Dont bother with broot or kingo.I suggest chilling out patiently and wait for a safe method..NO RECOVERY AVAILABLE (BOOT LOADER) LOCKED...here is info backing what I just SAID..PERIOD!!!!!!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
---------- Post added at 08:13 PM ---------- Previous post was at 08:13 PM ----------
http://androidfannetwork.com/2013/11/08/psa-kingo-root-and-vroot-malicious/
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
It's an opinion that root is usless.i have root and am patiently waiting for what comes next.no reason to come off so hard
ROOTED ATT MK2 using Tapatalk

Kingo works
I tested also and it works on MK2 4.3:good::laugh:

Kingo Android Root worked just fine for my MK2 build S4. The easiest way on any Android device I've ever rooted.

http://forum.xda-developers.com/showthread.php?t=2565758
worked for me on mk2 att
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

jsimsfour said:
http://forum.xda-developers.com/showthread.php?t=2565758
worked for me on mk2 att
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Please follow this link. Kingo, vroot etc. aren't worth the worry. This method is fast and efficient. Anyone who tells you root isn't worth it doesn't know what they are talking about. At the very least you can delete the bloatware!
Sent from my SAMSUNG-SGH-I337 using Tapatalk

[Q] OTA update after root on Stock? (SM-G900T) "Device was modified in an unauthorize

[Q] OTA update after root on Stock? (SM-G900T) "Device was modified in an unauthorize
Just ran the root guide posted by Chainfire and it worked like a dream. I now have a rooted phone on TouchWiz like I wanted. Unfortunately, there is also an update for the phone available which refuses to install giving me the "Device was modified in an unauthorized way" error. Is there a way to get around this problem while remaining on stock? Or am I now left with relying on custom ROMs to get updated versions of Android?

No, you can download firmwares from wherever (eg Sammobile) and flash via ODIN. You may have to re-root.

keep in mind if you update it will lock your bootloader since these phones came with unlocked bootloaders. no way in hell am i stupid enough to let them lock my bootloader.

nobnut said:
No, you can download firmwares from wherever (eg Sammobile) and flash via ODIN. You may have to re-root.
Click to expand...
Click to collapse
Thanks for the link. I actually used KIES to get the job done.

koinek said:
Thanks for the link. I actually used KIES to get the job done.
Click to expand...
Click to collapse
LOL I just came back to edit my post to add Kies as an option.
Sent from my SM-G900F using XDA Premium 4 mobile app
---------- Post added at 07:13 AM ---------- Previous post was at 07:12 AM ----------
fatalfury said:
keep in mind if you update it will lock your bootloader since these phones came with unlocked bootloaders. no way in hell am i stupid enough to let them lock my bootloader.
Click to expand...
Click to collapse
What are you talking about? That's rubbish.
Sent from my SM-G900F using XDA Premium 4 mobile app

nobnut said:
LOL I just came back to edit my post to add Kies as an option.
Sent from my SM-G900F using XDA Premium 4 mobile app
---------- Post added at 07:13 AM ---------- Previous post was at 07:12 AM ----------
What are you talking about? That's rubbish.
Sent from my SM-G900F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No lies here I have custom recovery and root. G900t came with unlocked bootloaders
Feel free to see your self
http://forum.xda-developers.com/showthread.php?p=51833106

fatalfury said:
No lies here I have custom recovery and root. G900t came with unlocked bootloaders
Feel free to see your self
http://forum.xda-developers.com/showthread.php?p=51833106
Click to expand...
Click to collapse
But that has got nothing to do with this thread's subject.
Sent from my SM-G900F using XDA Premium 4 mobile app

Root fail! Help.
I tried rooting my SM-G900T and I get a fail on Odin every time i try. And i have to use Kies emergency update to install firmware again. I tried tried everything from using different cables to formatting the device to using a different version of Odin! My Knox counter is now 0x1. But no root. And i get a message on my phone phone when it fails on Odin "Set Warranty Bit: Cache"
Please help if you can! Thanks in in advance.

Try different computer the same thing happened to me. I got it to work
Sent from my SM-G900T using xda app-developers app

[Q] Witch safestrap do I need

I been reading around but can't figure out witch safestrap do I need I'm a noon I got a galaxy s4 on 4.4.2 nb1 rooted with towel root thank you in advance

Psantana said:
I been reading around but can't figure out witch safestrap do I need I'm a noon I got a galaxy s4 on 4.4.2 nb1 rooted with towel root thank you in advance
Click to expand...
Click to collapse
3.72
Sent from my Nexus 5 using XDA Free mobile app
---------- Post added at 08:12 PM ---------- Previous post was at 08:11 PM ----------
See this
http://forum.xda-developers.com/showthread.php?p=55338138
Sent from my Nexus 5 using XDA Free mobile app

See this
http://forum.xda-developers.com/showthread.php?p=55338138
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
See this
http://forum.xda-developers.com/showthread.php?p=55338138
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
OK I downloaded all the files on the link I got 2 ? Is the file 3.72 kk bo1 apk the one I need and the second is in what order do I install all the files the instructions on the link are not noob friendly and thanks again you are of great help I did brake my phone again last night trying. To install safestrap but with what you taught me I got it back up thanks

Will safetrap gonna e available now that we have root ?

im just curious about it

randy-247 said:
im just curious about it
Click to expand...
Click to collapse
I dont think so so happy I got back root today..Maybe multisysyem which is tricky Im looking into it

I've tried the KK safestrap on Jasmine 6.1 (5.0 LP) and as far as I can tell it doesn't work for me. The developer has stopped the support of it so our only hope is a tool to make it compatible or perhaps someone else to pick up the development of satestrap at some point if possible?

After 5.0 they had fireflash or flashfire I think. Can't remember the name and worked for me on with 5.0 before. which is like the safestrap
Sent from my VS985 4G using Tapatalk

thunderblaster88 said:
After 5.0 they had fireflash or flashfire I think. Can't remember the name and worked for me on with 5.0 before. which is like the safestrap
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
Flashfire
Sent from my SM-N900V using Tapatalk

Flash fire Is not a recovery..don't think. If something goes wrong flash fire does not come to rescue. It's an app
Sent from my SM-N900V using XDA Premium 4 mobile app
---------- Post added at 12:50 AM ---------- Previous post was at 12:49 AM ----------
So was safestrap but it hijacked boot
Sent from my SM-N900V using XDA Premium 4 mobile app

davekaz said:
Flash fire Is not a recovery..don't think. If something goes wrong flash fire does not come to rescue. It's an app
Sent from my SM-N900V using XDA Premium 4 mobile app
---------- Post added at 12:50 AM ---------- Previous post was at 12:49 AM ----------
So was safestrap but it hijacked boot
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
And since SS is loaded before the OS booted, then if there was a problem booting such as a bootloop, SS would allow you to recover a backup. Flashfire only works if the OS is able to load. Most important to me is the ability to access the OS files via the file manager and rename files. Many times when trying a MOD you may rename the original files and the new files will cause a bootloop. In this case SS will allow you to restore the backup files. Flashfire is useless for this.

Fireflash is sketchy at best. Lol.
But SS doesn't and for the note 3 prolly will never work on LP
Sent from my SM-N900V using Tapatalk