Hi,
So as many of you already knew - I'm working on porting CM13 onto my NU3001.
I has it on my desk table, so I could work on it during my days. (I have another NR3001 installed in my car)
I already made some work for our unit SW. This is quick screenshots. Sources based on xdAuto and CM13. This is a very BETA and many things not working for now.on.
Why? : When I realize than CyanogenMod 13 (6.0.1) works on my Motorola XT1080 better than stock - I start thinking of porting CM13 to our device. And when I have spare set - I start porting.
How? : I took easiest way - try to do not modify kernel a lot, instead adopt bionic and other libraries for out 3.0.36+ kernel.
Currently working staff (it is very beginning):
1. Recovery TWRP 3.0.2
2. CM13 (LineAge OS) booting.
3. Graphics working (there is some blinking present).
4. Wifi working
5. Android audio working
6. Bonovo Radio working
4. Most of the rest is on the way (GPS, BT, rest of Bonovo apps)
UPDATE_1:
I decide to do not stuck with CM 13 and switch to AOSP N release (7.0) (mostly because on my daily job - we also going to Android N, so it should be more familiar to me now)
Currently working staff:
1. Recovery TWRP 3.0.2
2. SELinux needs to be carefully ported (kernel part), cause starting from 7.0 is can not be disabled (as I did for CM13 to easy port)
During this port I will try to minimize inpact to AOSP release, so any future updates should be much more easier.
For you to understanding of amount of needed work - kernel already has 100+ patches on top of xdauto release. Approximate left about 250-300 patches to revise/port.
Android 7.0 port abandoned because of bigger and bigger amount of work need to be done to port SELinux on top of our outdated kernel.
UPDATE2:
I setup review build environment, so who want to look at NOT-FULLY-WORKING CM13 could download sources and binaries. I do not provide instructions how to flash it, because who wants to look and contribute already know hot to flash, and who doesn't probably don't really want this NOT-FULLY-WORKING CM13
UPDATE3:
So I finally managed to get functional networking. So now Wifi working, internet working, display working.
I starting to port all necessary items. No more 'hard' showstoppers so far.
New build (I believe it is build number 5) should be ready in an our on build server, so I could test it more fully.
UPDATE4:
Cause CyanogenMod is no more maintained - switched to it's successor Lineage OS 13.0, starting from build 8
UPDATE5:
Build number 15 has working audio + radio
UPDATE6:
Most of Bonovo changes ported, new build 20 ready.
This build contains zip file which should be flashable via twrp, but I not test it this way.
Issues remaining so far(most noticeable to me):
1. Display flickering (my suspect is to vsync/fence mechanism slightly changed in Android 6.0, need to investigate)
2. HW Volume buttons not working on device
3. No audio In
UPDATE 7:
Starting from build 23 following images available:
cm_rk3188-ota-XX.zip - update to use via TWRP
nu3001-la-cm13-XX-userdebug.tar.gz - build image for flash via command line rkflashtool under linux (full or partial flash)
rkflash_nu3001-la-cm13-XX-userdebug.zip - Full image to be flashed via PC GUI RK Batch Tool.
kernel_nu3001-la-cm13-XX-userdebug.tar.gz - just kernel with debug symbols for debugging purposes.
To just download sources:
repo init -u https://gerrit.nc.org.ua/manifest -b nu3001_cm13
If you plan to contribute - login to Gerrit with GMail, push your SSH public key, choose login name and then do:
repo init -u ssh://<user>@gerrit.nc.org.ua:29418/manifest -b nu3001_cm13
Builds will be available on Jenkins build server (login also via GMail, PM for access grant on current project stage):
https://jenkins.nc.org.ua/
1.5 GB folder on MEGA
4 files
mega.nz
Please do not spoof this thread with questions like "When?", I will try to post updates regularly in this message.
This thread created is mostly to exchange experience with this build once it is published (issues, TODOs, etc)
**Reserved **
First!
Second! Lol
I'm not a developer so unfortunately I can't contribute, but hopefully those who can will.
At the very least I can beta test when its a little more complete.
Android port system less complicated than the application Bonovo.app and MCU. Good luck and patience.
Black're a legend !!
Your project is great !!! see Android 6.0 on Carpad would be great.
Thanks for the great effort you make for all
Woooow great !!
Good luck
nice one, i hope a very important feature:
"that can be use apps, which require android +4.4.4, like lollipop"
I say that because android auto "stand alone" coming soon, so if will be possible install this app in the radio, we have android auto pure, ( not automate that is awesome but is not the same like original ), and maybe mp3 stuttering from usb can be solved in this rom.
keep up work!
Thanks for the sneak peak, looks promising. I'll gladly help sponsor a new device if you happen to brick yours. I love this headunit and how far the community has gotten in supporting it.
I want to buy NU3001 now, is there any way to get it?
vivacious said:
I want to buy NU3001 now, is there any way to get it?
Click to expand...
Click to collapse
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.
VBlack said:
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.
Click to expand...
Click to collapse
I want NU3001 because it has hdmi option. But check in aliexpress newsmy store said it is no production now. Is there someone have stock?
---------- Post added at 01:48 AM ---------- Previous post was at 01:43 AM ----------
VBlack said:
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.
Click to expand...
Click to collapse
I want NU3001 because it has hdmi option. But check in aliexpress newsmy store said it is no production now. Is there someone have stock?
vivacious said:
I want NU3001 because it has hdmi option. But check in aliexpress newsmy store said it is no production now. Is there someone have stock?
Click to expand...
Click to collapse
I just put NU3001 to aliexpress search bar and found a lot of propositions, I think there should be available one.
Hi VBlack,
it's nice to know you're making progress on the new ROM CM13. All are rooting for you !! Your work would be wonderful !!
I have only one question:
With the ROM of XDAuto I found an annoying problem that occurs when i turn off and then relight the Carpad.
When the power back very often the Carpad car remains with black screen until i touch it with my finger.
I think the problem is somehow related to the USB ports.
Even with your ROM does this happen ?? When you turn on the car, the Carpad remains ever with black screen ??
Thank you!!
VBlack said:
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.
Click to expand...
Click to collapse
Do you have your efforts posted on github anywhere? Would you mind doing so?
There is a chance I may be working on these devices again after all, and having a working CM provides a *LOT* of possibilities. Namely the Theme engine.
If you would be willing to post your work, I'm sure there are a handful of us who could help with the port.
Thanks,
Zaphod-Beeblebrox said:
Do you have your efforts posted on github anywhere? Would you mind doing so?
There is a chance I may be working on these devices again after all, and having a working CM provides a *LOT* of possibilities. Namely the Theme engine.
If you would be willing to post your work, I'm sure there are a handful of us who could help with the port.
Thanks,
Click to expand...
Click to collapse
Nice to hear from you. Sure I will share. Current situation is next:
CM13 - no wifi (looks like netfilter from userspace not match netfilter from our outdated kernel), no selinux (completely disabled), and increased system partition to be able to add opengapps, twrp - works.
AOSP 7 - it is strongly rely on selinux, so i could not just disable it, and now I'm trying to merge new selinux with our old kernel...
So, i will upload CM13 in current state, and continue on aosp 7, if i fail with aosp 7 i will back to cm13. This is current plan.
Sent from my DROID MAXX using Tapatalk
Zaphod-Beeblebrox said:
Do you have your efforts posted on github anywhere? Would you mind doing so?
There is a chance I may be working on these devices again after all, and having a working CM provides a *LOT* of possibilities. Namely the Theme engine.
If you would be willing to post your work, I'm sure there are a handful of us who could help with the port.
Thanks,
Click to expand...
Click to collapse
I update first post with sources and build information
@VBlack, you mention "our outdated kernel". Does this imply that the kernel sources aren't available? I am very interested in this project because I am looking for a head unit with fully update firmware that can be kept up to date with security patches, and some of the Android security patches include the kernel (e.g. the recent "dirty cow" vulnerability).
shatteredsilicon said:
@VBlack, you mention "our outdated kernel". Does this imply that the kernel sources aren't available? I am very interested in this project because I am looking for a head unit with fully update firmware that can be kept up to date with security patches, and some of the Android security patches include the kernel (e.g. the recent "dirty cow" vulnerability).
Click to expand...
Click to collapse
No, we have kernel sources, but our kernel version 3.0.36 and looks like nobody release Android kernel 3.14 or 3.18 for rk3188. 3.14 and 3.18 mostly used in Android M and N. So combining Android M or N with such outdated kernel is not a trivial task. Because of this incompatibility we currently have all networks issue on this CM13 project.
Kernel 3.0.36 is 4.5 years old. The 3.0 branch is no longer maintained with security patches, and hasn't been maintained in over 3 years. There have been numerous security exploits in the Linux kernel since then, many of which are applicable to Android. Is it worth even persevering with this under such an extreme kernel constraint?
shatteredsilicon said:
Kernel 3.0.36 is 4.5 years old. The 3.0 branch is no longer maintained with security patches, and hasn't been maintained in over 3 years. There have been numerous security exploits in the Linux kernel since then, many of which are applicable to Android. Is it worth even persevering with this under such an extreme kernel constraint?
Click to expand...
Click to collapse
You'd be surprised how many phones in the market use old kernels (3.0 is not too old for Android - it is about 2-3years off from active development).. But true is that Android kernel despite it's version less vulnerable than Desktop one, and has many fixes included (it is does not increase kernel version, like mainline kernel). Because of this it is generally hard to say which security issue will be there for sure. But on the other hand Android N and Android M has SELinux enabled, and Android N could not have it disabled. It is dramatically increase overall security of the system. But for the most of traditional Android user kernel exploits does not produce many harm - it is not a corporate server with sensitive information. And many of them used to obtain root on bootloader locked systems.
So generally for what I have in mind:
1. If succeeded just with CM13 - I have disable SELinux there - it is will be not less secure than original 4.x release - just system/google components will be upgraded, which allow us use modern UI features from Android M, and also adds more compatibility with new applications revisions.
2. If succeeded with AOSP 7.0 - SELinux will be enabled there, so we will have security addition on top of old kernel, which actually will increase security alongside allowing UI features from Android N.
So in any case it is very nice to have.