[Q] CM11 Update Bootloader - Droid RAZR M Q&A, Help & Troubleshooting

TLDR: Need KitKat bootloader. Can it be installed on a rooted, unlocked device?
I am using CM11 on my phone (Droid Razr M/XT-907). When I try to install cyanogenmod updates using the built-in function, the installation always fails due to my bootloader being outdated. Apparently I still have the bootloader from jelly bean and I need the KitKat bootloader version. Now that my phone is unlocked and has a custom OS and recovery, is there any way to obtain the newest bootloader version and get it installed on my phone?

The only way I know is to rsd to kitkat stock then install. My other devices we just installed the kernel but I haven't seen that here. You are unlocked so you are able to flash down and back up.
Sent from my XT907 using XDA Free mobile app

mmmrower said:
TLDR: Need KitKat bootloader. Can it be installed on a rooted, unlocked device?
I am using CM11 on my phone (Droid Razr M/XT-907). When I try to install cyanogenmod updates using the built-in function, the installation always fails due to my bootloader being outdated. Apparently I still have the bootloader from jelly bean and I need the KitKat bootloader version. Now that my phone is unlocked and has a custom OS and recovery, is there any way to obtain the newest bootloader version and get it installed on my phone?
Click to expand...
Click to collapse
There is this if you don't want to RSD up to KitKat other wise everything you need to update to KitKat is here courtesy of ATTACK
We cannot teach people anything; we can only help them discover it within themselves.

RSD?

mmmrower said:
RSD?
Click to expand...
Click to collapse
RSD lite is the tool used to flash the stock firmware on a Motorola device its like Odin that the Samsung device's use... Read through the XDA thread I linked in the prior post for a better understanding of the procedure
We cannot teach people anything; we can only help them discover it within themselves.

So my next question is:
Within the cyanogenmod .zip that you would normally flash to your device, there is a file called "boot.img." Is this file normally flashed to the boot partition when you install cyanogenmod?
In other words, if I manually did a "fastboot flash boot boot.img", would that replace the bootloader? Or does cyanogenmod not include bootloader data? I've been scouring the web for hours trying to find this out.

To be honest I'm not sure what flashing just the boot image would do... I don't believe it would effect the boot loader... We would have to wait on a more experienced member... Flashing the KitKat firmware doesn't take long at all and you could always back up your app date with your desired back up app
We cannot teach people anything; we can only help them discover it within themselves.

The boot.img and the boot loader are two different things. You'll need to FXZ/update to get the new BL.
Sent from my HTC6525LVW using Tapatalk

RikRong said:
The boot.img and the boot loader are two different things. You'll need to FXZ/update to get the new BL.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I just finished flashing [what I think] is stock firmware. Now, if I update OTA, won't that upgrade me to an "unlockable" bootloader? (whatever the latest one is).
My bootloader is currently unlocked, if that means anything.
[edit] I OTA updated anyways. And I don't think it re-locked my bootloader. But now it keeps overwriting clockworkmod every time I "fastboot" clockworkmod into place. Can't seem to reboot into recovery straight from fastboot mode anymore. The power+volume up combo doesn't work. Maybe that's a sign that the bootloader's locked? I still get the motorola "Bootloader Unlocked" screen every time it boots up.

If your boot loader was already unlocked it will remain unlocked
Sent from my XT907 using XDA Free mobile app

I'm tracing it back to the root of the problem: why do you *need* to upgrade to KK BL? CM11 is also available for JB BL and as for my experience half a month ago, it's more bugfree than the KK BL version (KK BL had WiFi & GPS bugs, don't know what's the situation now).
I see you've already upgraded... So please try out latest CM11 KK BL (moto_msm8960) and see if it has WiFi, GPS or BT issues. If yes, you might wanna fall back to JB BL.
Sent from Google Nexus 4 @ CM11
[WARNING: XDA Premium 4.0.13 lacks Signature function - do not update]

How would I "fall back" to JB bl?
I'm currently stuck trying to get any sort of ROM installed. It seems the stock image that I flashed re-writes the recovery partition every time I flash CWM. So I can't even boot to recovery anymore. Until I get that figured out, well, we'll see lol.
Know where I could get a system.img and boot.img of ANY functional cyanogen ROM?
I got CM to install ONCE from recovery (the first time I installed it). Subsequent attempts at installing the snapshot builds failed and complained that I needed the kitkat bootloader.
[edit]And now adb doesn't even work. hahahaha
[edit]Got everything working. Seems to be pretty stable.
[edit]Back when I first installed CM, I had the JB BL and installed the KK cyanogen. I had a bug with my wifi, but it was due to me installing incorrectly. Otherwise I didn't find any issues.

Thanks for all your help everyone.

Related

fastboot for Aussie Razr M 77.176.16.XT905.Telstra.en.AU

Hi all
Just wondering if anyone has a copy of the official Australian Razr M release firmware.
77.176.16.XT905.Telstra.en.AU
Always good to have a fallback system image!
Thanks in advance
wintermute000 said:
Hi all
Just wondering if anyone has a copy of the official Australian Razr M release firmware.
77.176.16.XT905.Telstra.en.AU
Always good to have a fallback system image!
Thanks in advance
Click to expand...
Click to collapse
Hi, I am also looking for the same firmware, managed to root the phone using Motofail2go but unable to use Clockworkmod to backup or load other firmware. Now when I try to Erase the phone I get the AP Fastboot Flash Mode (s) Device is looked Boot Failure. Luckily pressing the power button gets me back to a working phone. I have also unrooted the phone using DoomLord unrooting script but still the same boot up error. I know now the bootloader is locked by Motorola, this is why I need the original Telstra firmware.
I will donate $ 20 by Paypal to anyone that posts a working 77.176.16.XT905.Telstra.en.AU firmware that I can use and fixes the boot issue.
ozsultan said:
Hi, I am also looking for the same firmware, managed to root the phone using Motofail2go but unable to use Clockworkmod to backup or load other firmware. Now when I try to Erase the phone I get the AP Fastboot Flash Mode (s) Device is looked Boot Failure. Luckily pressing the power button gets me back to a working phone. I have also unrooted the phone using DoomLord unrooting script but still the same boot up error. I know now the bootloader is locked by Motorola, this is why I need the original Telstra firmware.
I will donate $ 20 by Paypal to anyone that posts a working 77.176.16.XT905.Telstra.en.AU firmware that I can use and fixes the boot issue.
Click to expand...
Click to collapse
Out of curiosity what CWM did you try to flash?
You do know that you CAN unlock your bootloader right? exact same procedure as Razr I. Yeah the moto website doesn't mention telstra Razr M model blah blah blah it works as confirmed by Ausdroid editor in this thread.
http://forum.xda-developers.com/showthread.php?p=33777574#post33777574
wintermute000 said:
Out of curiosity what CWM did you try to flash?
You do know that you CAN unlock your bootloader right? exact same procedure as Razr I. Yeah the moto website doesn't mention telstra Razr M model blah blah blah it works as confirmed by Ausdroid editor in this thread.
http://forum.xda-developers.com/showthread.php?p=33777574#post33777574
Click to expand...
Click to collapse
Hi I used CWM from Google Play and selected the Motorola Photon Q from CWM, maybe a mistake but no RAZR M was listed.
I registerd on the Motorola site to get the unlock key but there is a quite a process to complete the excersice. Rather just have my stock rom back and forget about rooting for now.
ozsultan said:
Hi I used CWM from Google Play and selected the Motorola Photon Q from CWM, maybe a mistake but no RAZR M was listed.
I registerd on the Motorola site to get the unlock key but there is a quite a process to complete the excersice. Rather just have my stock rom back and forget about rooting for now.
Click to expand...
Click to collapse
I dunno how experienced you are at this so I apologise if I'm getting mixed up here but:
a.) You will NEVER flash ANY RECOVERY aside from stock without unlocking your bootloader, and you don't flash CWM from google play (not even sure what you're referring to!!!). You CAN flash recoveries from rom manager if your bootloader is unlocked and you have root.
b.) The only recovery I've seen around the place confirmed for Razr M (unlocked bootloader) is this one
http://aosp.us/?p=294
If you think the steps in unlocking bootloader is too hard you shouldn't even attempt it. Sorry to say but thats pretty much standard stuff for flashing recoveries etc. !!!! (having drivers installed, using fastboot via command line etc.)
wintermute000 said:
I dunno how experienced you are at this so I apologise if I'm getting mixed up here but:
a.) You will NEVER flash ANY RECOVERY aside from stock without unlocking your bootloader, and you don't flash CWM from google play (not even sure what you're referring to!!!). You CAN flash recoveries from rom manager if your bootloader is unlocked and you have root.
b.) The only recovery I've seen around the place confirmed for Razr M (unlocked bootloader) is this one
If you think the steps in unlocking bootloader is too hard you shouldn't even attempt it. Sorry to say but thats pretty much standard stuff for flashing recoveries etc. !!!! (having drivers installed, using fastboot via command line etc.)
Click to expand...
Click to collapse
Hi Thanks for your help and comments, I have rooted my old HTC Desire using Unrevoked in the past and flashed a Cyanogen mod and a LeeDroid mod without any problems so I thought I would try the RAZR M. Maybe the boot loader was different or not locked. I was able to go into recovery mode and select the cooked zipped roms from the SD card. I can not find any roms for the Aussie RAZR M either, I guess that is what you are looking for and concerned about updating the the JB from for the Verizon version as the radio may be different.
Anyway, the Motorola UI is not so bad and I especially like to start page with the circles. Hopefully JB update will come OTA soon. I hope that the JB update will return my phone to stock and the Bootloader error does not come up anymore. All is fine for now but if I have to wipe my phone and start again I can not do it. Have you ended up using your Motorola unlock code to unlock the boot loader ?
I am not completely a newbie
ozsultan said:
Hi Thanks for your help and comments, I have rooted my old HTC Desire using Unrevoked in the past and flashed a Cyanogen mod and a LeeDroid mod without any problems so I thought I would try the RAZR M. Maybe the boot loader was different or not locked. I was able to go into recovery mode and select the cooked zipped roms from the SD card. I can not find any roms for the Aussie RAZR M either, I guess that is what you are looking for and concerned about updating the the JB from for the Verizon version as the radio may be different.
Anyway, the Motorola UI is not so bad and I especially like to start page with the circles. Hopefully JB update will come OTA soon. I hope that the JB update will return my phone to stock and the Bootloader error does not come up anymore. All is fine for now but if I have to wipe my phone and start again I can not do it. Have you ended up using your Motorola unlock code to unlock the boot loader ?
I am not completely a newbie
Click to expand...
Click to collapse
No waiting for
- backup stock image for obvious reason!
- something to actually flash to appear!
BTW check this thread http://forum.xda-developers.com/showthread.php?p=33789915#post33789915 the comments from apacheo who has confirmed unlock and recovery install (TWRP though not CWM)
wintermute000 said:
No waiting for
- backup stock image for obvious reason!
- something to actually flash to appear!
BTW check this thread http://forum.xda-developers.com/showthread.php?p=33789915#post33789915 the comments from apacheo who has confirmed unlock and recovery install (TWRP though not CWM)
Click to expand...
Click to collapse
Thanks. did you mean now waiting, I guess u could mean either as apacheo has something available ? Looks like apacheo might be getting my $20 via paypal. So with the recommendation from apachio do I still have to unlock the booter. If yes, can this only be done via the Motorola site unlock code?
Will the stock Telstra image from apacheo fix my boot failure issue ? Will I need to have a rooted RAZR M and loader (TWRP) to load the file?
Thanks appreciate your help.
You shouldn't need to unblock bootloader to push the stock image. If its stock you should be able to flash it.
The whole point of unlocking is to be able to push NON OFFICIAL stuff however not having seen that image I can't confirm. e.g. Maybe because he extracted it himself its not signed like an official moto image so you may need to unlock.
If he has extracted a fastboot image it will INCLUDE stock recovery and you flash it via fastboot command line utility. Thats better than a ROM you have to flash with a recovery because it lets you roll back even if you screw your recovery.
All in all, ask him yourself, I'm only speculating based on first principles
BTW android manufacturers have gotten a lot more anal since desire, and yeah back then a lot of stuff was unlocked, now pretty much only Sammy ships unlocked bootloaders. I'd say that back then you could probably unlock the bootloader pretty easily so you don't remember jumping through hoops.
ozsultan said:
Thanks. did you mean now waiting, I guess u could mean either as apacheo has something available ? Looks like apacheo might be getting my $20 via paypal. So with the recommendation from apachio do I still have to unlock the booter. If yes, can this only be done via the Motorola site unlock code?
Will the stock Telstra image from apacheo fix my boot failure issue ? Will I need to have a rooted RAZR M and loader (TWRP) to load the file?
Thanks appreciate your help.
Click to expand...
Click to collapse
The stock recovery img is probably not going to fix your device.. sounds like you probably need the boot image, but how'd you manage to corrupt that?
apacheo said:
The stock recovery img is probably not going to fix your device.. sounds like you probably need the boot image, but how'd you manage to corrupt that?
Click to expand...
Click to collapse
Hi Apacheo, thanks for the reply, my procedure was as per my first post yesterday. Using Clockworkmod Rom Manger app I picked the Motorola Photon Q for Flash Alternate Recovery as this was the only close Motorola phone to the Razr M. (MY BAD) Maybe that was the problem. I tried to back up the existing rom using Clockworkmod but again got the AP Fastboot Flashmode error.
How do I get the boot image and load that? Meanwhile I have unrooted the phone and can use it. Just can't do a factory data reset and start with a new slate if I have to. Just hangs on the AP Fastboot Flashmode (S) black and white Device is locked screen.
Thanks, I was hoping to lose that $20 to u.
Flashing the stock recovery using fastboot is probably the best start.
I'll upload the recovery image and post the URL here. Wait a moment.
Sent from my XT905 using xda app-developers app
---------- Post added at 08:01 PM ---------- Previous post was at 07:56 PM ----------
Here's the stock recovery image:
http://db.tt/A5veTD0u
Sent from my XT905 using xda app-developers app
apacheo said:
Flashing the stock recovery using fastboot is probably the best start.
I'll upload the recovery image and post the URL here. Wait a moment.
Sent from my XT905 using xda app-developers app
---------- Post added at 08:01 PM ---------- Previous post was at 07:56 PM ----------
Here's the stock recovery image:
http://db.tt/A5veTD0u
Sent from my XT905 using xda app-developers app
Click to expand...
Click to collapse
Thanks Apacheo, I assume I can use RSD Lite 5.4.6.4, how to open the 10 MB RAW file ? I know RAW as a picture file from a camera. Does the 10 MB file contain the whole Telstra ROM ?
ozsultan said:
Thanks Apacheo, I assume I can use RSD Lite 5.4.6.4, how to open the 10 MB RAW file ? I know RAW as a picture file from a camera. Does the 10 MB file contain the whole Telstra ROM ?
Click to expand...
Click to collapse
No idea about RSDLite, you use Fastboot to flash that, and it's a raw dump of the Recovery partition. Flash it like this:
fastboot flash recovery recovery-file.raw
The extension is irrelevant, you could equally rename it .img (which is the standard for fastboot files) but it won't make any difference. It's not the whole Telstra ROM, just the recovery partition. The whole ROM would be something like 600 mb, and as I've modified my system partition (i.e. rooted it) you may not want that, and with only 3G internet, I couldn't upload it anyway
apacheo said:
No idea about RSDLite, you use Fastboot to flash that, and it's a raw dump of the Recovery partition. Flash it like this:
fastboot flash recovery recovery-file.raw
The extension is irrelevant, you could equally rename it .img (which is the standard for fastboot files) but it won't make any difference. It's not the whole Telstra ROM, just the recovery partition. The whole ROM would be something like 600 mb, and as I've modified my system partition (i.e. rooted it) you may not want that, and with only 3G internet, I couldn't upload it anyway
Click to expand...
Click to collapse
Hi apache, thanks again, HELP.
OK, I press vol up and vol down and press the power key at the same time. I get the menu boot load selection, availlable boot modes if I pick recovery or AP fastboot I still get back to the AP Fastboot Flashmode (s) screen Device is locked Status Code:0
I assume I get into recovery mode and use your raw file from my SD card to update the recovery partition. What am I doing wrong?
incorrect, you flash via fastboot command line in.... fastboot mode (not recovery mode)
Hey,
I'm hoping to help you guys out. First I have a couple of questions.
1) is your device bootloader unlocked?
2) are you rooted?
If so I have methods to create a backup XML file for you.
jimmydafish said:
Hey,
I'm hoping to help you guys out. First I have a couple of questions.
1) is your device bootloader unlocked?
2) are you rooted?
If so I have methods to create a backup XML file for you.
Click to expand...
Click to collapse
If you have methods to recover an Australian modem IMG (instead of the Verizon-based one) then I'm all ears.. because until I find an AU modem, my phone is now completely unusable.. whoops :/
apacheo said:
If you have methods to recover an Australian modem IMG (instead of the Verizon-based one) then I'm all ears.. because until I find an AU modem, my phone is now completely unusable.. whoops :/
Click to expand...
Click to collapse
We can work on this, do you have access to another AU M? Plus this may be easier via gtalk or email.
jimmydafish said:
We can work on this, do you have access to another AU M? Plus this may be easier via gtalk or email.
Click to expand...
Click to collapse
If I had another, I'd just root it and dd the modem image off and flash it on the broken one.. sadly I don't
I managed to screw it up by flashing the VZW ICS stock, so I could get the JB update on.. I deliberately didn't flash the modem from the VZW ICS stock, and I modified the JB update so it wouldn't apply any changes to the modem... but seemingly, I missed a couple of lines (checking the updater-script, I missed a couple that messed with the modem) so it's completely wrecked. Says the SIM is invalid, and won't detect or connect to any UMTS or GSM carriers here.
If someone else with a rooted Aussie RAZR M is able to step up to assist, it'd be great.
I'll also PM you my details jdf.

[Q] Help update to stock 4.2.2 from custom rom 4.2.1

Hi
First of all, this is don't habitual for me since I used to read related post (and more if an update has just arrived) but I just could not find an specific instructions (sorry if I am being too demanding) to go from custom 4.2.1(PA) to stock and finish with rooted 4.2.2, there are a lot of several procedures or recommendations to perform the update :S
well this is what I have planed
- return to stock 4.2.1 (using nexus toolkit)
- download and flash manually the update to 4.2.2 (first try to use the ota update option)
- get root... how??? lol
- restore my apps/data
Since I will return to stock I think I will lose root, that is ok but only if i can root the nexus again, Will I be able to get root on 4.2.2? or I have to root in 4.2.1 and keep it (in some way) at the time I update to 4.2.2
Srryforbad/basicenglish:silly:
Rooting every nexus is the same. Flash/boot a custom recovery and flash supersu.zip. it doesn't matter what OS version its on.
Sent from my Nexus 7 using Tapatalk HD
Pirateghost said:
Rooting every nexus is the same. Flash/boot a custom recovery and flash supersu.zip. it doesn't matter what OS version its on.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
ok, I think I have missing that simple thing...
I don't have to worry about get the bootloader locked again therefore I just have to flash a recovery and SU when I have my N7 on 4.2.2, but...flash from... bootloader I guess, well, I will check that.
Thanks!
Learn the manual way of doing it and don't rely on toolkits. There are many tutorials walking you through the entire process
Sent from my Nexus 7 using Tapatalk HD
SLver said:
ok, I think I have missing that simple thing...
I don't have to worry about get the bootloader locked again therefore I just have to flash a recovery and SU when I have my N7 on 4.2.2, but...flash from... bootloader I guess, well, I will check that.
Thanks!
Click to expand...
Click to collapse
To elaborate on Pirateghost's points...
After flashing the 4.2.2 update... you will lose your recovery (CWM or TWRP)... but getting your recovery back is also part of how you (re)gain root.
As I have posted elsewhere...
Rooting is really simple.
(You will need an unlocked bootloader for this).
Get a custom recovery .img for your device...
Either CWM - http://www.clockworkmod.com/rommanager
...or TWRP - http://www.teamw.in/project/twrp2/103,
...it matters little which...
-----------
fastboot flash it.
-----------
Get Chainfires SU .zip package here http://download.chainfire.eu/310/SuperSU/UPDATE-SuperSU-v1.04.zip
Flash it using the custom recovery you've just fastboot flashed..
Reboot... and you're rooted.
-----------
...and that's it basically... you have root, a custom recovery from which you can flash ROMs, perform nandroid backups, etc.
But fastboot is the key... learn how to use it, and you will never need to be reliant on anybodies toolkit.
Rgrds,
Ged.

[Q] Please help with my XT905 installing recovery and custom ROM!

Hi can anyone tell me if xt907 roms will work on my xt905 (australian model) running stock android 4.1.2, system version 98.21.7.XT905.Telstra.en.AU.
I have rooted using Motochopper and have the SuperSU v0.94 installed.
I have also unlocked the bootloader using Motopocalypse which I presume worked. Just a bit stuck on the next stage. I would like to install cm-10.1.3-xt907.zip rom.
But first I need a recovery, can anyone advise? I don't know which one to install or where to get the right file. I dont want to brick my phone!
Any help would be greatly appreciated! Thanks, Tim
timpyne84 said:
Hi can anyone tell me if xt907 roms will work on my xt905 (australian model) running stock android 4.1.2, system version 98.21.7.XT905.Telstra.en.AU.
I have rooted using Motochopper and have the SuperSU v0.94 installed.
I have also unlocked the bootloader using Motopocalypse which I presume worked. Just a bit stuck on the next stage. I would like to install cm-10.1.3-xt907.zip rom.
But first I need a recovery, can anyone advise? I don't know which one to install or where to get the right file. I dont want to brick my phone!
Any help would be greatly appreciated! Thanks, Tim
Click to expand...
Click to collapse
The latest philz 622+ is best. The 926 link from my general post. The key navi only version is actually better for a noob & YOU WILL BE OVERWHELMED w/ the many options. Cwm style key navigation is impossible to screw up.
...And unified moto_msm8960 ROMs will definitely work for both XT905 and 907. Examples are CM11 and Carbon.
Sent from Google Nexus 4 @ CM11
timpyne84 said:
Hi can anyone tell me if xt907 roms will work on my xt905 (australian model) running stock android 4.1.2, system version 98.21.7.XT905.Telstra.en.AU.
I have rooted using Motochopper and have the SuperSU v0.94 installed.
I have also unlocked the bootloader using Motopocalypse which I presume worked. Just a bit stuck on the next stage. I would like to install cm-10.1.3-xt907.zip rom.
But first I need a recovery, can anyone advise? I don't know which one to install or where to get the right file. I dont want to brick my phone!
Any help would be greatly appreciated! Thanks, Tim
Click to expand...
Click to collapse
Step 0: Install adb & fastboot
Just in case, since you look a beginner
here to install, assuming you're a PC user
Also, in your stock rom, go into Developer Options in Settings
Turn them on, and enable USB debugging
Step 1:
Check if the bootloader is unlocked
(Please bare with me if yours is different since my 905 was the developer version with bootloader already unlocked)
Power off phone, then hold down vol+/- together, and press power button. This will take you into bootloader.
Go to AP fastboot.
This will take you to the fastboot screen, and will tell you if the phone is LOCKED or UNLOCKED
Stay on fastboot since you will need it for the next step.
Step 2: Flash custom recovery
Download the recovery from here, copy paste it to where you installed ADB/fastboot (default C:/Program Files/Minimal...)
I prefer TWRP (use hdpi) but CWM is good too.
Fire up ADB/fastboot
Code:
fastboot devices
This will show if device is connected
Code:
fastboot flash recovery TWRP*.img
This will flash recovery.
Step 3: reboot into recovery
Code:
fastboot reboot
adb reboot recovery
So from here you can go flash your phone's new ROM. Read here
Bear in mind that the 905 roms have been merged with the 907, 925 and 926 roms (quite) recently. You will find the Roms under moto_msm8960. I do not recommend you flast the 10.1.3 xt907 rom, since it is for US phones. They use CDMA which is not compatible with our GSM. Basically, you will get no signal. CM10.1 is superseded by CM11 anyway.
9 times out of 10 I would recommend CM11 for your first custom ROM, but the battery life hasn't been optimised for 905 my phone (which my partner uses) died after 13 hours of use. You might have better luck.
If not, then feel free to flash any others in the Android Dev section in the forum. I find Carbon Rom to be stellar but I haven't tested it on the 905 yet.
GL&HF
dabanhfreak said:
Bear in mind that the 905 roms have been merged with the 907, 925 and 926 roms (quite) recently. You will find the Roms under moto_msm8960. I do not recommend you flast the 10.1.3 xt907 rom, since it is for US phones. They use CDMA which is not compatible with our GSM. Basically, you will get no signal.
Click to expand...
Click to collapse
We have GSM patch for that circumstance (although it's not certain whether the Verizon-specific patch would still work on a XT905 - backup and try).
Sent from Google Nexus 4 @ CM11
AndyYan said:
We have GSM patch for that circumstance (although it's not certain whether the Verizon-specific patch would still work on a XT905 - backup and try).
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
Yep. Didn't mention it because didn't want to confuse the noobie

Stock 5.0.1, Rooted, Bootloader Unlocked, TWRP Recovery - 5.0.2 will not install

I apologise if this is not the correct forum so someone please correct me if necessary thanks.
I have a Google Nexus 10 with the Stock 5.0.1 ROM, an unlocked bootloader, and a custom TWRP Recovery.
My Nexus has just automatically downloaded the 5.0.2 update but when I tap on INSTALL it simply boots into TWRP Recovery. If I try to manually install from there I get the "failed" message?
I think this may be because my bootloader is unlocked but before I lock it I need to ask some questions. I have a Samsung Galaxy S3 GT-I9300 (Intl) which I have been rooting and switching custom ROMs with for a couple of years so I am familiar with rooting and flashing recovery and ROM images so will hopefully understand any replies so here goes:
1 Will automatic update resume if I lock my bootloader again?
2 If I do lock my bootloader will anything happen, that is, will anything get erased/restored?
3 If I laterUNlock my bootloader will anything happen, that is, will anything get erased/restored?
4 In summary I'm thinking I can lock my bootloader to allow the automatic install of update 5.0.2 and then simply unlock the bootloader again if I need to?
I would appreciate any comments/advice. Thanks
matrixmainframe said:
I apologise if this is not the correct forum so someone please correct me if necessary thanks.
I have a Google Nexus 10 with the Stock 5.0.1 ROM, an unlocked bootloader, and a custom TWRP Recovery.
My Nexus has just automatically downloaded the 5.0.2 update but when I tap on INSTALL it simply boots into TWRP Recovery. If I try to manually install from there I get the "failed" message?
I think this may be because my bootloader is unlocked but before I lock it I need to ask some questions. I have a Samsung Galaxy S3 GT-I9300 (Intl) which I have been rooting and switching custom ROMs with for a couple of years so I am familiar with rooting and flashing recovery and ROM images so will hopefully understand any replies so here goes:
1 Will automatic update resume if I lock my bootloader again?
2 If I do lock my bootloader will anything happen, that is, will anything get erased/restored?
3 If I laterUNlock my bootloader will anything happen, that is, will anything get erased/restored?
4 In summary I'm thinking I can lock my bootloader to allow the automatic install of update 5.0.2 and then simply unlock the bootloader again if I need to?
I would appreciate any comments/advice. Thanks
Click to expand...
Click to collapse
It's because you've got a custom recovery. Download the 5.0.2 factory image and flash it with wugs toolkit and set it to no wipe mode. I did it and it works fine.
Sent from my Nexus 5 using XDA Free mobile app
matrixmainframe said:
I apologise if this is not the correct forum so someone please correct me if necessary thanks.
I have a Google Nexus 10 with the Stock 5.0.1 ROM, an unlocked bootloader, and a custom TWRP Recovery.
My Nexus has just automatically downloaded the 5.0.2 update but when I tap on INSTALL it simply boots into TWRP Recovery. If I try to manually install from there I get the "failed" message?
I think this may be because my bootloader is unlocked but before I lock it I need to ask some questions. I have a Samsung Galaxy S3 GT-I9300 (Intl) which I have been rooting and switching custom ROMs with for a couple of years so I am familiar with rooting and flashing recovery and ROM images so will hopefully understand any replies so here goes:
1 Will automatic update resume if I lock my bootloader again?
2 If I do lock my bootloader will anything happen, that is, will anything get erased/restored?
3 If I laterUNlock my bootloader will anything happen, that is, will anything get erased/restored?
4 In summary I'm thinking I can lock my bootloader to allow the automatic install of update 5.0.2 and then simply unlock the bootloader again if I need to?
I would appreciate any comments/advice. Thanks
Click to expand...
Click to collapse
Let's do HARD reinstall. Make sure to backup the data you wanna keep as it will be erased in the process.
Download the official google factory images.
Read the instructions( really easy)
Install trhought adb
You can boot into 5.0.2
Bingo!

New method to downgrade and root 183.46.15version of kitkat4.4.2 (for XT926 UNLOCKED)

This METHOD was developed ONLY for an UNLOCKED Motorola Droid Razr Maxx HD XT926m phone that is already updated to the last version of KitKat 4.4.2 (System version "183.46.15.XT926.Verizon.en.US").
IF YOU HAVE AN LOCKED BOOTLOADER AND TRY THIS METHOD IT WILL BE ONLY YOUR RESPONSABILITY IF YOU DAMAGE YOUR PHONE !!!
My Motorola XT926m had an UNLOCKED BOOTLOADER (ICS 4.0.4) and I flashed via RSD Lite the last stock firmware, "183.46.15"... After that, I was, of course, unhappy, because I read on different forums that this firmware version didn't support root... I tried to download the Hydrogen Peroxide xt926 application that others users recommended here on XDA forum, without success.
But now, after I applied this method, my phone is again rooted... Enjoy the steps, but be carefull, it was developed for XT926 phones with UNLOCKED BOOTLOADER!
1. Download the files "VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF.xml" and "VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF.xml" from the Motorola firmware site: "motofirmware.com/files/file/"...
2. Unpack the files...
3. Substitute/replace the "gpt", "tz" files (FROM the folder with "15.1" version TO the folder with "10.1" version)... You should replace all the files that "RSD Lite" will tell you that don't fit when you try to flash the new stock firmware. You will obtain a MODIFIED version of "183.46.10" stock KitKAt 4.4.2 firmware!!!
4. Flash this MODIFIED "10.1" firmware with "RSD Lite v6.1.5 Multi-Flash" (without using Rsd Script Generator.jar), but don't forget to remove the first two 'getvar' lines in the xml file.
5. Download and install the "Towel Root.apk" and root the phone...
6. Now your phone should be ROOTED.
What to do NEXT:
7.Download from the Play Store and install "Superuser.apk" made by ClockWordMode and after reboot the application will ask you to update SU binary. In my case, the SU binary didn't support an online update and I installed the "Superuser.zip" file downloaded from the ClockWorkMode site, via recovery method, in order to gain this update (you can do this as well, if you already have a TWRP or CWM recovery installed on your phone). With the other version of superuser, like "SuperSU.apk" or "Superuser.apk" ("eu.chainfire.supersu-2.apk", the last version, 5.6mb, for example) you will need to follow the same steps...
8. Using "Total Commander.apk", you can go to "File System root"/"Etc"/"installrecovery.sh", and finally rename this last file... Or you can use "ES3 File Explorer.apk" in order to rename the same "installrecovery.sh" file in "Device"/"Etc" folder (choose, for example, the name "installrecovery.shbak")...
9. Flash with "Flashify.apk" (downloaded form PLay Store) a new "recovery img.": "TWRP.img" (2.8.3.0) or "CWM.img" (6.0.4.8) for KitKat... You can find them on "rootjunkysdl.com/?device=Droid%20Razr%20HD&folder=Firmware"...
10. If you flashed "TWPR recovery.img" you will need to install "Stericson.busybox-1.apk" (from Play Store...), because TWRP works with this busy box... (You could install "TWRP.apk" as well, but you must be careful, because you will need to be able to boot into Recovery mode directly from your phone (with the combination key), not from this app... Many times, the phone is able to boot into recovery mode from TWRP application, but not from the bootloader... That's why it is better to uninstall TWRP application if you have this problem). If you flashed a "CWM.img" you can install "RomManager.apk".
11.Now it is the time to backup your system to SD card!
That's it. My phone was unlocked, and I didn't have any issue following all this steps... If you're locked don't try it.
But.. If you're locked you could instead use an application named 'Safestrap' for some purposes (read more here on XDA forum please), because is destinated for the phones with locked bootloader...
Hi ,
Since this is a guide it does not belong to XDA Assist
Please Read The Purpose of XDA Assist
Please Standby when Moderators Move the Thread To Your Device Specific Forum
RAZR HD General
jackeagle said:
Hi ,
Since this is a guide it does not belong to XDA Assist
Please Read The Purpose of XDA Assist
Please Standby when Moderators Move the Thread To Your Device Specific Forum
RAZR HD General
Click to expand...
Click to collapse
THANKS!
I know you took a lot of time to write this up, but there is a downgrade method posted on here already. Also, there is no need to rename recovery.sh. All you need to do after flashing recovery is power off the phone and immediately boot straight back into recovery so the install script completes.
To answer your question, no, you can't unlock .15.
RikRong said:
I know you took a lot of time to write this up, but there is a downgrade method posted on here already. Also, there is no need to rename recovery.sh. All you need to do after flashing recovery is power off the phone and immediately boot straight back into recovery so the install script completes.
To answer your question, no, you can't unlock .15.
Click to expand...
Click to collapse
Thank you, I wasn't able to find another downgrade method, could you give me the link, please?
http://forum.xda-developers.com/showthread.php?t=2789743
But... to flash CWM or TWRP for update the binaries, you need to be bootloader unlocked... to flash a custom recovery...
joel_sinbad said:
But... to flash CWM or TWRP for update the binaries, you need to be bootloader unlocked... to flash a custom recovery...
Click to expand...
Click to collapse
Correct. That's why this method is flawed and probably should be pulled before someone bricks their phone.
RikRong said:
Correct. That's why this method is flawed and probably should be pulled before someone bricks their phone.
Click to expand...
Click to collapse
Yeah, unfortunately this post makes no sense, I mean, if you accidently flash the gpt.bin, you're screwed... and so many risks, plus, you can't flash custom recovery, and you can maybe downgrade the system and boot, but you still can't downgrade the bootloader...
joel_sinbad said:
Yeah, unfortunately this post makes no sense, I mean, if you accidently flash the gpt.bin, you're screwed... and so many risks, plus, you can't flash custom recovery, and you can maybe downgrade the system and boot, but you still can't downgrade the bootloader...
Click to expand...
Click to collapse
This method is for an XT926 with UNLOCKED BOOTLOADER, with the last 183.46.15 update and the root access lost. I only described the steps that I already done with my phone. My Maxx HD is working and has root access again... I flashed custom recovery too (TWRP 2.8.3.0), I haven't any other problem.
RikRong said:
http://forum.xda-developers.com/showthread.php?t=2789743
Click to expand...
Click to collapse
Thank you, unfortunately is not working for the xt 926 phone that already took the last 183.46.15 update:
"..........************WARNING*************
this guide only works completely if you did NOT take the 183.46.15 update rolling out around 9/9/14 .............".
Until now I don't have any other option, I'm forced to preserve the method that I mentioned in my thread.
ciprianv. said:
Thank you, unfortunately is not working for the xt 926 phone that already took the last 183.46.15 update:
"..........************WARNING*************
this guide only works completely if you did NOT take the 183.46.15 update rolling out around 9/9/14 .............".
Until now I don't have any other option, I'm forced to preserve the method that I mentioned in my thread.
Click to expand...
Click to collapse
The piece you are referring to that doesn't work on .15 is the unlock and root. The downgrade should work on an unlocked phone.
That aside, your steps are very confusing and could easily cause a locked user to brick their phone. Please clarify or I will continue reporting this thread until it gets removed.
RikRong said:
The piece you are referring to that doesn't work on .15 is the unlock and root. The downgrade should work on an unlocked phone.
That aside, your steps are very confusing and could easily cause a locked user to brick their phone. Please clarify or I will continue reporting this thread until it gets removed.
Click to expand...
Click to collapse
I just edited the post. I clearly specified that this methid is ONLY FOR UNLOCKED BOOTLOADERS (XT926M).
ciprianv. said:
I just edited the post. I clearly specified that this methid is ONLY FOR UNLOCKED BOOTLOADERS (XT926M).
Click to expand...
Click to collapse
Thanks for doing that, I just want to make sure no one messes up their phone.

Categories

Resources