My proximity sensor doesnt work with any AOSP rom, that mean it only works on ported Rom like Cloudy stock or G3.
Tried go back to Stock and got Pure modem, but still
I'm using D800 so anyone know how to fix it?
Thanks
Up
up
Hello,
Is simply a baseband problem.
I guess your compass doesn't work too.
Just flash the @dr87 modded KK baseband and enjoy!
Hello,
Is simply a baseband problem.
I guess your compass doesn't work too.
Just flash the @dr87 modded KK baseband and enjoy!
Hello,
Is simply a baseband problem.
I guess your compass doesn't work too.
Just flash the @dr87 modded KK baseband and enjoy!
Hello,
Is simply a baseband problem.
I guess your compass doesn't work too.
Just flash the @dr87 modded KK baseband and enjoy!
Hello,
Is simply a baseband problem.
I guess your compass doesn't work too.
Just flash the @dr87 modded KK baseband and enjoy!
Oup's little bug with XDA app!
To apologize there is the link :
http://forum.xda-developers.com/showthread.php?t=2705509
Related
I was on FoxHound 2.0 (android 4.2.2) and everything was fine, then when I updated to the latest FH 3.0 (4.3) I chose to flash the stock kernel on aroma, booted and set it up, updated the camera firmware and then reflashed the rom choosing audism kernel...
and then I noticed something odd, I can't take pictures with flash on the stock samsung camera!
flash works on video and touch to focus, just not when I actually take a picture :crying:
I thought it could be the rom so I wiped and went to Echoe rom... same issue...
did I do this for trying to update the camera firmware? can I go back?
thanks in advance guys
Hi guys,
My compass a gyroscope not working anymore on Mahdi rom. Before I was using a rooted kit Kat stock rom and it was working fine.
I discovered this when I tried to use photosphere, No locking was possible.
Then I used smart tools to verify this problem and discovered that nor compass or gyroscope was working.
Should I just try to do a factory reset or do you have some other ideas?
Thanks
Hi, I fixed this by flashing a kitkat modem especially for aosp Roms
http://forum.xda-developers.com/showthread.php?t=2705509
Flohiow said:
Hi, I fixed this by flashing a kitkat modem especially for aosp Roms
http://forum.xda-developers.com/showthread.php?t=2705509
Click to expand...
Click to collapse
Hi I faced the same problem screen rotation does not work on my LG F320S please help me to resolve this problem I am running stock lollipop not rooted LGF320S.
Thanks.
Hi,
i have just recently flashed CM11 M6 rom and my auto rotation stopped working
So i browsed around and found out that you have to flash Cloudyfa's KK BandBase which i have flashed.
However, after restarting, it doesnt seem to work
My prior rom is Pardus HD Rom which had a similar issue at first. however it was solved by flashing the baseband.
For CM11 it does not, are there anyways that i could get it to work? or do i have to go back to pardus HD rom.
Thanks in advance!!!
gzmiwza said:
Hi,
i have just recently flashed CM11 M6 rom and my auto rotation stopped working
So i browsed around and found out that you have to flash Cloudyfa's KK BandBase which i have flashed.
However, after restarting, it doesnt seem to work
My prior rom is Pardus HD Rom which had a similar issue at first. however it was solved by flashing the baseband.
For CM11 it does not, are there anyways that i could get it to work? or do i have to go back to pardus HD rom.
Thanks in advance!!!
Click to expand...
Click to collapse
cloudy's kk baseband is for stock, you need a kk baseband ported to aosp for your device or the jb baseband should work
Hello,
I'm using a stock based rom (cloudyflex) and would like to flash CM 11. I read that before i flash any AOSP rom i must flash the JB Baseband however i couldn't find it in any threads, so if anyone would be kind enough to send me the JB baseband for the D802, i would deeply appreciate it.
Thanks in advance
hello,
first that my device:
Model: lg g2 d802
Android version: 5.0.2 (cloudyG2 3.3)
baseband version: M8974A-AAAANAZM-1.0.190128 (KK_Baseband_D802 )
Kernal version: 3.4.0 (the cloudy's kernal)
software version: cloudyG2 3.3
_____________________________________________________________________________________________________________________________________
Things that i flashed:
bootloder: KK-20H-D802-BOOT-LOADER
pach cloudyG2 3.3 for G2 d802: D802_PATCH_GO_LP_V1.1_droidth (before i flash the rom)
Dorimanx that i tried to flash: Kernel-Dorimanx-V8.4-LP-[18-38]-[06-01]-LG-D802-PWR-CORE.zip
recovery: twrp-2.8.7.3-d802-bump-blastagator-signed
_____________________________________________________________________________________________________________________________________
i upgrade my lg to lolipop from kk and when i flashed the Dorimanx 8.4 LP kernal after flash rom (CLOUDYG2 3.3) the lg enter to bootloop , i fixed the bootloder and fastmode and then flash kdz rom and then the cloudy from the begining.
now the phone work but the battery worst and the phone work slowly.
1. What better: the cloudy or cyanogenmod? (or another rom ) cyanogenmod have an ir remote support ? when stble cloudy/cyanogenmod marshmellow out?
2. Flash another baseband? ( 30f? and where can i found this file with md5 code?)
3. which bootloder flash? use bootloder chenger? If i use bootloder chenger that flash baseband? which mod should i need to use ? (lolipop one?)
4. which recovery flash? whith version?
5. gps wasn't worl well, i installed the FasterGPS app and that improve but still it is slow. should i need to open the battary case or there is another way ?
thenks so so much!
If you were on LP cloudy g2 3.3 all you need was flash dorimanx 8.8 kernel. and it shouldnt have boot looped.
cloudy is stable . if CM then go qith 5.1.1 more stable than MM 6.0
best performance. but picture and camera not same quality as stock. as for ir remote yes theres one i ve seen.
you can try . roms all stock based.
icex
powerg2
google edition
for 30f look in d802 section. i think power g2 is 30f
use hybrid bootstacks.
use blastagator thermal twrp 2.8.7.3
raptorddd said:
If you were on LP cloudy g2 3.3 all you need was flash dorimanx 8.8 kernel. and it shouldnt have boot looped.
cloudy is stable . if CM then go qith 5.1.1 more stable than MM 6.0
best performance. but picture and camera not same quality as stock. as for ir remote yes theres one i ve seen.
you can try . roms all stock based.
icex
powerg2
google edition
for 30f look in d802 section. i think power g2 is 30f
use hybrid bootstacks.
use blastagator thermal twrp 2.8.7.3
Click to expand...
Click to collapse
so i need to flash?
1.twrp-2.8.7.3-d802-bump-blastagator-signed.zip
2.LP-BaseBand-30f_droidth.zip (where i found md5 code?)
3.BLChanger-d802_5_6-nevax-2.3.2-signed.zip (choose lp , it's flash baseband too?)
https:/ /docs.google .com/spreadsheets/d/1hA-PQuAz8EBNQy38hfGzRJEG2c_QckK9SliYsUZGkgY/edit#gid=0 (copy link and delete the aspace betwin / to / after the http and the apace after the google)
4.D802_PATCH_GO_LP_V1.1_droidth.zip
5.CloudyG2_3.3.zip
6.Kernel-Dorimanx-V8.8-LP-[18-00]-[24-01]-LG-D802-PWR-CORE.zip
You before the stock KitKat flash (I suggest 20C) after cloudyg2 flashed the ROM.
mraliaras said:
You before the stock KitKat flash (I suggest 20C) after cloudyg2 flashed the ROM.
Click to expand...
Click to collapse
The cloudyg2 3.3 is a lolipop rom, which baseband and bootloder i need to flash and if the flash files order that i wrote is correct?
Way 20C ?
YuvalHas said:
so i need to flash?
1.twrp-2.8.7.3-d802-bump-blastagator-signed.zip
2.LP-BaseBand-30f_droidth.zip (where i found md5 code?)
3.BLChanger-d802_5_6-nevax-2.3.2-signed.zip (choose lp , it's flash baseband too?)
https:/ /docs.google .com/spreadsheets/d/1hA-PQuAz8EBNQy38hfGzRJEG2c_QckK9SliYsUZGkgY/edit#gid=0 (copy link and delete the aspace betwin / to / after the http and the apace after the google)
4.D802_PATCH_GO_LP_V1.1_droidth.zip
5.CloudyG2_3.3.zip
6.Kernel-Dorimanx-V8.8-LP-[18-00]-[24-01]-LG-D802-PWR-CORE.zip
Click to expand...
Click to collapse
1.yes
2 /3 and 4 i dont know i have d800
if i understand ok. you were on stock LP. all you needed was twrp from blastagator this helps keep phone cool and prevent screen damage. ti has thermal to control cores. all you needed was hybrid bootstacks and the falsh rom.
i dont know the rest of things you flashed.
i think you just need to wipw all data/cache/dalvik and internal sd. then flash hybrid bootstacks. go to main menu/reboot into recovery. then flash rom. thats it. that is if you are in stock LP
flash it?
if i flash hybrid bootstacks i need to flash bootloder too (lp bootloder with bootloder chenger)? or that in the hybrid bootstacks
hybrid bootstacks:
-Aboot (KK)
-Dbi (LP)
-Laf (LP) (BUMP)
-Modem (LP)
-Persist (LP) (Except LS980)
-Rpm (LP)
-Sbl1 (LP)
-tz (LP)
1.twrp-2.8.7.3-d802-bump-blastagator-signed.zip (bump it?)
2.flash hybrid bootstack
3.BLChanger-d802_5_6-nevax-2.3.2-signed.zip (choose lp )
https:/ /docs.google .com/spreadsheets/d/1hA-PQuAz8EBNQy38hfGzRJEG2c_QckK9SliYsUZGkgY/edit#gid=0 (copy link and delete the aspace betwin / to / after the http and the apace after the google)
4.D802_PATCH_GO_LP_V1.1_droidth.zip
5.CloudyG2_3.3.zip
6.Kernel-Dorimanx-V8.8-LP-[18-00]-[24-01]-LG-D802-PWR-CORE.zip