[Q] How to Manual update the NHA (Android 4.4.4) OTA - Verizon Galaxy S 5 Q&A, Help & Troubleshooting

I don't get the OTA update on my VZW S5 , even the fact i am on NE9, tried several times to get it via software update from the device - no luck , not working.
so i thought to flash it manually and need the "how to do it" steps.
I found the 4.4.4 OTA zip file.
Can anyone be kind and guide me with the steps how to manual flash it ?
is it done by the loading the zip file to the S5 and flashing from recovery or it should be done via ODIN ? please advise & guide me how to do it.
Currently i am on the NE9 stock - UN rooted

I'm on NGC stock rooted..how would I go about manually updating to the 4.4.4 update.

http://forum.xda-developers.com/showthread.php?p=55347753

I managed to upgrade to 4.4.4 by downloading the full firmware instead of the OTA and flashed it via Odin 3.09 and it worked like magic
its was as easy just to download the file from the link below , unzip it and get the md5 file and flash with Odin 3.09
I was on stock, un-rooted , 4.4.2 , NE9 and upgraded to NHA
The full firmware can be found here
https://www.androidfilehost.com/?fid=23622183712472389

warpedmind0u812 said:
http://forum.xda-developers.com/showthread.php?p=55347753
Click to expand...
Click to collapse
Thanks

Related

Upgrading from MJA to latest(NG2?)

Hello,
I have a MJA rom (with TRWP) and rooted. I never updated it in past, but i want to upgrade now.
I understand, we need to have stock recovery to flash the new updates. I searched a lot and couldnt find it. Could someone please help me out with this?..
I dont have any issues with KNOX .. etc
Just need safe route to upgrade to new version on my s4(and root it back).
thanks!!:good:
You first need to upgrade your phone to NAE via Odin to return your phone to an unaltered stock condition. You can get the tar file from random45's thread in the android development section. You will not lose data with the update, but I do recommend you use Odin 3.07 or 3.09. After you are updated to NAE you will have to goto settings menu and select samsung software updates to check if NG2 is available for download. After you update you can then use cfautoroot or towel root to reroot your phone. If your rooting to use the hotspot hack, just upgrade to NAE, since there isn't a hack for NG2 yet.
Sent from my icrap 2 using Tapatalk HD
Thankyou for the detailed post. I was finally able to update without any serious issues.
1) flashed NAE through odin. No issues, no errors. successful flash.
2) downloaded ng2 update.zip from here and tried installing it from recovery. Errored out. (dont remember the exact error)
3) went back to recovery -- factory reset, wipe cache, restart and try update.zip . same error.
4) started up phone and checking if all is ok, saw the baseband still showed MJA while software showed NAE.
5) Odin'ed the modem/firmware of NAE.
6) checked the status and it showed upgraded baseband.
7) I then went to recovery and retried NG2 update.zip again & updated successfully.
8) rooted with CF auto & restored apps and data from titanium.

[Q] NOOB trying to update MK2 firmware to Lollipop

As the Title states I have been trying to flash to Lollipop using the thread Update to lollipop and keep root using Flashfire app. I have downloaded and followed the procedure (yes I am rooted and confirmed with RootBasic) with it failing.
What happens is I load the files in order stated per the guide hit the lightning bolt, does the reboot and then gives error no command and then sits at stock flash update where you can either reboot, flash file or few other choices. I have tried numerous times with each time same result. What is going wrong? As I stated on am on MK2 firmware with ATT update frozen so not sure why this is. When put in download mode I confirm Knox 0 and Offical software with it having 0x30 for bootloader. Any suggestions or should I ODIN update but with what?
Frankpjr said:
As the Title states I have been trying to flash to Lollipop using the thread Update to lollipop and keep root using Flashfire app. I have downloaded and followed the procedure (yes I am rooted and confirmed with RootBasic) with it failing.
What happens is I load the files in order stated per the guide hit the lightning bolt, does the reboot and then gives error no command and then sits at stock flash update where you can either reboot, flash file or few other choices. I have tried numerous times with each time same result. What is going wrong? As I stated on am on MK2 firmware with ATT update frozen so not sure why this is. When put in download mode I confirm Knox 0 and Offical software with it having 0x30 for bootloader. Any suggestions or should I ODIN update but with what?
Click to expand...
Click to collapse
We just discovered this morning on the Vz S4 that FF does not function properly on their MK2(4.2) firmware which is likely also the issue here. You will first need to update to KitKat using the following file then root with towel root before updating to 5.0: https://www.androidfilehost.com/?fid=23501681358548937
Before I proceed to KitKat with file linked to is there a guide to properly performing this and then rooting? I will update from MK2 to NB 1 then I need to root, then do the FlashFire and Lollipop undate. I see the guide to use ODIN but then I will have to root I also have not used towel root either so any guide would be awesome. This should not change KNOX either correct (although I guess it does not matter since I am long out of warranty)?
I want to have a clear understanding of procedure so I don't brick the phone! I have not used ODIN before since I haven't really done much rooting other than when I first got the replacement phone last year
I'd suggest [GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap by guut13, and of course [How-To] Update to I337_OC3 - 5.0.1 and KeepRoot (4/7/2015) by muniz_ri for rooted Lollipop. Look in the I337 General forum for both.
Thanks Creepyncrawly and muniz_ri for both of your help it was easy to update from MK2 for this noob!
Ok I followed the guide and did update to stock nb1 and rooted, used towel root and then used flashfire to Lollipop and all seems to be working (I still am in process of setting phone up but it is running lollipop).
Since this is oc3 rooted is there anything else I have to do such as freeze att update? Anything else I should do right away?

[ODIN) [All-in-One] [OB7-Stock-Firmware] [Kernel,Boot,Recovery,Modem,Carrier]

I made these odin flashable firmwares for those who need them. This is only the stock firmware for Lollipop 5.01 build OB7. (NO system or data partitions) If you need to flash the stock OB7 firmwares then this will do that for you. This will not wipe your system or data.
Once you flash the "OB7-FW.tar.md5" you must reroot and flash a custom recovery if you want to flash custom roms etc. Simply odin flash cf-auto-root and the latest recovery by TWRP and you'll be back in business.
The OB7-modem.tar.md5 requires no extra steps... it's just the modem.
I have tested these packages on my Note 4 running OB7 firmware. Note: If you are on OE1 firmware, you will NOT be able to flash this OB7 firmware successfully due to new security measures in the OE1 bootloader.
OB7-FW.tar.md5 This tar package includes all of the stock OB7 firmware including kernel,modem, recovery, bootloader, etc. Please flash this in odin on your PC ONLY!
OB7-modem.tar.md5 This tar package includes only the modem and HLOS patch. Can be flashed with odin on your pc and also mobile odin.
Gonna try
tx_dbs_tx said:
I made these odin flashable firmwares for those who need them. They are the stock firmware for Lollipop 5.01 build OB7. If you need to go back to the OB7 firmwares then give this a try. This will not wipe your system or data.
Once you flash the "OB7-FW.tar.md5" you must reroot and flash a custom recovery if you want to flash custom roms etc. Simply odin flash cf-auto-root and the latest recovery by TWRP and you'll be back in business. The OB7-modem.tar.md5 requires no extra steps... it's just the modem.
I have tested these packages on my Note 4 running OB7 firmware. OE1 bootloader/recovery may not allow flashing back to older firmware. (I haven't tested with OE1 firmware) Please report your success or failure when flashing this over your OE1 firmware.
OB7-FW.tar.md5 This tar package includes all of the stock OB7 firmware including kernel,modem, recovery, bootloader, etc. Please flash this in odin on your PC ONLY!
OB7-modem.tar.md5 This tar package includes only the modem and HLOS patch. Can be flashed with odin on your pc and also mobile odin.
Click to expand...
Click to collapse
I just tried this and I got the following error:
UDC START
SW RED CHECK FAIL : [tz]Fused 2 > Binary 1
I am using Odin 3.07, running Windows 7.
tx_dbs_tx said:
I made these odin flashable firmwares for those who need them. They are the stock firmware for Lollipop 5.01 build OB7. If you need to go back to the OB7 firmwares then give this a try. This will not wipe your system or data.
Once you flash the "OB7-FW.tar.md5" you must reroot and flash a custom recovery if you want to flash custom roms etc. Simply odin flash cf-auto-root and the latest recovery by TWRP and you'll be back in business. The OB7-modem.tar.md5 requires no extra steps... it's just the modem.
I have tested these packages on my Note 4 running OB7 firmware. OE1 bootloader/recovery may not allow flashing back to older firmware. (I haven't tested with OE1 firmware) Please report your success or failure when flashing this over your OE1 firmware.
OB7-FW.tar.md5 This tar package includes all of the stock OB7 firmware including kernel,modem, recovery, bootloader, etc. Please flash this in odin on your PC ONLY!
OB7-modem.tar.md5 This tar package includes only the modem and HLOS patch. Can be flashed with odin on your pc and also mobile odin.
Click to expand...
Click to collapse
ive been searching but can you help me put stock 0e1 recovery back on my phone i forgot to factory data reset after i updated to 0e1 and rerooted and now my phone is super buggy and i think its because i didnt wipe on stock recovery which usually fixes my problems. thanks if you can help or not. ive wiped on twrp of course but my stock rooted 0e1 rom just isnt right idk but like i said the stock recovery to me really wipes evrything. ive tried aosp roms but there even more buggy can you please help thanks
No one has it yet
Right. There is no official tar ball available for OE1 firmware. OTA is the only way right now and nobody has pulled and uploaded the update zip for OE1. Im afraid you're gonna have to try the OB7 official rom tar or else you're stuck until a tar pops up somewhere. And that may not happen for OE1.
PeteSeiler2010 said:
I just tried this and I got the following error:
UDC START
SW RED CHECK FAIL : [tz]Fused 2 > Binary 1
I am using Odin 3.07, running Windows 7.
Click to expand...
Click to collapse
Thanks for the report. Which software version are you currently on? Extension OB7 or OE1 ??? You must be on OE1 because it flashed successfully on my OB7 software. I will upload another version for you to test.
Yes, I am on OE1, I will gladly test for you. Just keep me posted.
So just to clarify, if I am on KK, I can ODIN this then cf auto root then TWRP? And don't take the update to OE1 because it's not worth it?
Sent from my SM-N910P using XDA Free mobile app
beezar said:
So just to clarify, if I am on KK, I can ODIN this then cf auto root then TWRP? And don't take the update to OE1 because it's not worth it?
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
Ok, don't mess with this, it's for a different purpose. Read the OP in @tx_dbs_tx 's hybrid X 2.2 rom thread here:
http://forum.xda-developers.com/showthread.php?t=2956667
Read the OP carefully as there is a VERY specific procedure (it's easy) you MUST follow to move up to lollipop.
Stock tar in the OP here:
http://forum.xda-developers.com/showthread.php?t=3056478
If you'd rather have a stock rom instead of hybrid x download the stock tar and follow tx's instructions to the T in his Hybrid-X OP before flashing it or any lollipop based rom.
Remember, you MUST flash the stock OB7 tar BEFORE flashing any lollipop rom.
EDIT: If you decide to go stock, do not take the ota. Once you cf-auto-root & odin twrp you won't have to worry about it anymore. The same with Hybrid-X. Once you flash that no more OTA worries.
Did u find the hidden image ??
I'm not going to pursue the OE1 secured bootloader thing. We will have to wait for an official tar ball and rebuild roms from it. Until then I'm staying on my OB7 rom.
I dont quit but thanks for your efforts
pbedard said:
I dont quit but thanks for your efforts
Click to expand...
Click to collapse
Have at it... Keep us posted.
Meh sourcecode is out

Galaxy S4- How Do I Update From 4.4.2 To 5.0?

Update from 4.4.2
Hi all,
I'm stuck on 4.4.2 right now, but i want to update to 5.0.
Anyone who can give me a tutorial?
I have no SD card.
Connect to a good wifi, go into settings and there should be an "Software update" option somewhere, if you are on stock rom.
Do this,go to sammobile,download firmware 5.0.1 for your mobile and install with Odin program,that is all .
Yes if can't update from ota, download firmware from sammobile and flash via odin . .
I forgot to mention, that i have rooted my phone using CF-autoroot
It doesnt matter, you can flash your official firmware via Odin whenever you want. Just download the firmware from sammobile.com and flash it. Thats all. In addition if you want to use a custom rom you can choose a 5.x.x version of it and flash it via TWRP recovery. It is your choise.
Okay i've followed THIS tutorial, but now it asks for some root issues.
"Root access possibly lost. Fix?"
"THIS CAN NOT BE UNDONE"
"- No"
"- Yes - fix root (/system/xbin/su)"
I want to keep my root
I am quite stuck untill someone tells me how to keep my root.
I am using CWM.

software update on firmware marshmallow

Hello,
My Note 4 is rooted , emotion nightly with twrp, using stock rom samsung marshmallow
today I received a software update for the marshmallow firmware.
the update is a zip file
I tried to flash the update using twrp, but it failed. As I understood twrp can't flash zip files, only tar
I tried to flash the update using odin, but it failed. is this the same with odin?
maybe I am doing something wrong
is there by any chance a possiblity to flash the update or do I need to install the complete new stock firmware ?
thanks in advance, kind regards, coinco
How did you recieved the update ?
If you downloaded it from sammobile
Then first extract the zip file , if you get an .tar file , only then you can flash it with odin .
You simply cant flash an official update through any unofficial software , so dont try to flash it in custom recovery .
Reporting via N910G.
Thank you, for your answer,
I received the update, through (F) OTA,
so as I understand correctly, it will not be possible to flash the file.
It will be no problem , I will flash the original new firmware.

Categories

Resources