How to get into Diag mode:
1) open dialer
2) enter: *#*#717717#*#*
3) you'll see a toast "diag mode enabled"
To disable diag-mode enter the same code again.
How to install drivers in Windows:
1) download and extract xiaomi_mi2_diag_driver.zip
2) after you've connected your phone in diag mode you'll see very much devices
3) choose custom source to search for driver and select the extracted folder.
4) only 3 of the devices will install it doesn't matter we don't need the others.
How to configure QPST:
1) open QPST configuration from start menu
2) on tab "ports" click on "Add new Port"
3) you should see two qualcom ports in the list. choose one and click OK.
4) if displayed phone name is SURF9615, you've selected the correct one. otherwise add the second device, too
But why?
Hello M1cha,
I'm sorry if this is obvious but what exactly can I use this for
Is it changing my IMEI?
And if so, why would I want to change it?
Again, I'm sorry if the answer is obvious and I'm just asking a stupid question.
Unrelated question:
Do you know if Xiaomi.eu will really shut down or not? I can't seem to get straight answers on the Q&A forum
Redme Note LTE TD
Hello
I used your guide and http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
to unlock the WCDMA frequencies on my Redmi NOTE LTE TD ... bought in china .... everything OK ... but the phone works on GPRS ... I have also tried using the menu * # * # 4636 # * # * .. but nothing ..
do you have same idea ??
thank you !
Gobbenobber said:
Hello M1cha,
I'm sorry if this is obvious but what exactly can I use this for
Is it changing my IMEI?
And if so, why would I want to change it?
Again, I'm sorry if the answer is obvious and I'm just asking a stupid question.
Unrelated question:
Do you know if Xiaomi.eu will really shut down or not? I can't seem to get straight answers on the Q&A forum
Click to expand...
Click to collapse
On mi2 u can't change the IMEI because it's locked.
But you can change several settings and unlock bands.
I don't think MA shuts down soon but Marks ups and downs are very annoying.
mzz75 said:
Hello
I used your guide and http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
to unlock the WCDMA frequencies on my Redmi NOTE LTE TD ... bought in china .... everything OK ... but the phone works on GPRS ... I have also tried using the menu * # * # 4636 # * # * .. but nothing ..
do you have same idea ??
thank you !
Click to expand...
Click to collapse
Maybe these bands really aren't supported by hardware?
m11kkaa said:
On mi2 u can't change the IMEI because it's locked.
But you can change several settings and unlock bands.
I don't think MA shuts down soon but Marks ups and downs are very annoying.
Maybe these bands really aren't supported by hardware?
Click to expand...
Click to collapse
but when I enable WCDMA ..i can see the network [0]=CellInfoWcdma ..... but the type of network is still GPRS ... maybe some setting?
I don't think so. That's the normal behavior if a band isn't supported.
You can even enabled LTE but it won't work because the hw doesn't support it.
Modem Dead
I'm sorry to bother you again, but I have a big problem ..... with Qualcomm QPST I have a modified live parameters for the WCDMA network, but now the modem does not work anymore (2g, 3g, lte) and I can not connect the phone with QPST (say NO pHONE) .... I can do something ??
thanks
Well you have to restore the parameters to the original ones. I hope you made a backup.
m11kkaa said:
Well you have to restore the parameters to the original ones. I hope you made a backup.
Click to expand...
Click to collapse
I can not do the restore ... QPST Configurator does not see the phone ... or is there another method ??
Is it possible to enable wcdma band 900 MHz on mi2s?
orlanddon said:
Is it possible to enable wcdma band 900 MHz on mi2s?
Click to expand...
Click to collapse
I'd like to know that, too
i have one of the first batch of mi2 without wcdma 900 and it's very important to my operator so you know if it's hw supported or not? If i mess up with miflash i will restore everything or not? After a wipe i must repeat all the procedure?
Does somebody know which code it is for Redmi2? *#*#717717#*#* doesn't work... I want to try to unlock LTE band 20 (800Mhz), do you think any chance?
Any of you have got unlock 900MHz 3G on MI2 with this ?
Very interested in.
regards
I tried the tips but something's wrong :
QPST is ok i see my phone MI2 : APQ8064
With RF NV manager i got the error when i read from phone :
NvManager::getNvItemsFromPhone( const string comPort ) - QpstServer::sendSyncImpl - Bad response from phone (DM packet commands 19-24)
Again when i tried to make a backup :
"Memory Backup failed"
"Disk Error while writing to file"
Really stange... any advise ?
m11kkaa said:
How to get into Diag mode:
1) open dialer
2) enter: *#*#717717#*#*
3) you'll see a toast "diag mode enabled"
To disable diag-mode enter the same code again.
How to install drivers in Windows:
1) download and extract xiaomi_mi2_diag_driver.zip
2) after you've connected your phone in diag mode you'll see very much devices
3) choose custom source to search for driver and select the extracted folder.
4) only 3 of the devices will install it doesn't matter we don't need the others.
How to configure QPST:
1) open QPST configuration from start menu
2) on tab "ports" click on "Add new Port"
3) you should see two qualcom ports in the list. choose one and click OK.
4) if displayed phone name is SURF9615, you've selected the correct one. otherwise add the second device, too
Click to expand...
Click to collapse
Hi M1cha, I'd like to so a backup, but I can't let it work.
My problems start from the biginning: when I enter the code I got no toast message. I tried to connect anyway the phone (when is on, with and without debug option), but I don't see much devices, only the usual MI2 MTP.
Suggestions? Could be ROM releated?
Fortinho said:
Hi M1cha, I'd like to so a backup, but I can't let it work.
My problems start from the biginning: when I enter the code I got no toast message. I tried to connect anyway the phone (when is on, with and without debug option), but I don't see much devices, only the usual MI2 MTP.
Suggestions? Could be ROM releated?
Click to expand...
Click to collapse
yes, this works in MIUI only
m11kkaa said:
yes, this works in MIUI only
Click to expand...
Click to collapse
Still problems :/
I got this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And If I try to update drivers individually, only one will successfull install. It's normal?
Anyway, after that, I don't know how to open QPST configuration from start menu. What start menu?
Thank you.
Fortinho said:
Still problems :/
I got this:
And If I try to update drivers individually, only one will successfull install. It's normal?
Anyway, after that, I don't know how to open QPST configuration from start menu. What start menu?
Thank you.
Click to expand...
Click to collapse
Up.
Fortinho said:
If I try to update drivers individually, only one will successfull install. It's normal?
Click to expand...
Click to collapse
I don't know but you will see after with qpst if it works.
Fortinho said:
I don't know how to open QPST configuration from start menu. What start menu?
Click to expand...
Click to collapse
What windows do you've got?
With Seven : Start menu is bottom left on your screen
With 8 : go on the mosaic screen (where you have all your program) and type QPST. You will find QPST configuration
Related
Below you'll find a "step by step" tutorial on how to flash your Samsung Galaxy Tab Firmware to the European version ( unbranded firmware ) and therefore enabling the phone calls option ( and 3G data + 850/1900Mhz WCDMA ) Tested and working for the following tabs: Bell, Rogers.
What do you need?
Download the following package:
Code:
http://rapidshare.com/files/444576369/Samsung_TAB_Euro_Flash_Package.7z
What's in it?
Kies_2.0.0.11011_16_5.exe
Odin3 v1.31
P1000XWJJ4
P1000XXJK5
modem_bell_i9000
Preparation:
A. After downloaded the package and extracted with 7zip Install and then reboot: Kies_2.0.0.11011_16_5.exe (this will install properly drivers x86 or 64 depending on your OS configuration, needed for your Tab and Odin to communicate correctly ).
B. Extract Odin3_v1.31_PITupdate and put the all the files contained in P1000XWJJ4 into Odin3 v1.31 source folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C. Set you Samsung Tab into "Download mode" ( Hold volume down and power button until the device boot up. You'll see a yellow android sign and some warning text like :do not turn off target) and connect it to your PC with the USB cable.
D. Start Odin3 v1.31.exe and make sure that the com post is yellow highlighted and check off Re-partition.
E. Load the following files as shown in the screenshot below:
F. Hit Start and then relax, hopefully it is going to be ok and in about 2. min and 50 you'll get a green highlight and pass stamp in the same Odin screen which will also reboot the Tab. It will be In Russian, but not to worry. keep reading below.
G. Turn offf the tab and set it to download mode again. Transfer over the Odin folder the P1000XXJK5.tar file re-start Odin, Connect the phone.
H. Leave the "Re-partition" unticked and load into "PDA" the tar file. Hit "Start" and wait again about 2min and 50 sec, you'll get the same green pass and the tab will reboot.
I. This is the final step. now you are going to flash the tab with the right Modem files. Again like Put the Tab into download mode unpack the modem_bell_i9000.zip into Odin folder then start Odin up and select "phone". Load the modem.bin up and hit Start. Wait for the Green pass and you are DONE!!!
[note]In order to have Internet and mms going you need to set the right APN settings. Google your provider for specifics.[/note]
Bell canada has the following Settings:
Code:
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type: Internet + mms
Authentication Type: none
Are you wondering where the APN settings are?
1. Press the Menu key
2. Tap Settings
3. Tap Wireless controls
4. Tap Mobile networks
5. Tap Access Point Names
6. Press the Menu key
7. Tap New APN.
8. Enter your settings
FAQ
clubtech said:
If you see missing apps from the market it is because XXJK5 is not an official firmware and the market is not showing protected apps.
To change this you will need to edit the build.prop file under /system and change the fingerprint.
If you are lazy you can do the following:
1) root the tab
2) install busybox from the market, open the app and install busybox from within the app.
3) install GST from the market
4) go top step 6 in the app "change your fingerprint" ad run the script
5) go to setting > applications > manage applications > ALL > find "market", force stop and clear data
6) reboot the tab, reopen the market - you should see all apps now.
Click to expand...
Click to collapse
Credit:
Tutorial By: Neuropass @Newage-os.com How to flash the Samsung Galaxy Tab FW to enable phone calls
Original Poster: clubtech @XDA
Questions:
1/ Does the tab need to be rooted first?
2/ Does this method work for any U.S. and Canada Tab? Or is this for a specific carrier/brand? (I plan to buy a Sprint Galaxy Tab from a friend and it is rooted)
HI,
1. No you it doesan't need to be rooted because you are going to re-intall and all new firmware.
2. It sohould work for every device is US and Canada as far as i know. You might want to look a little deeper in the forum and see if you find other info. Succesfully tested with the following Carriers: Bell, At&t, T-Mobile, rogers.
I have a us sprint tab cdma will it work?
Sent from my SPH-P100 using XDA App
So this will let you use voice and 3g on T-Mobile?
Does this contain bootloader lock?
rsmurdoch said:
So this will let you use voice and 3g on T-Mobile?
Does this contain bootloader lock?
Click to expand...
Click to collapse
I would like to know about this as well. Just got the Tab today and would love to have voice future with T mobile 3g.
It should work on sprint tabs... No bootlock
If anyone is brave enough to actually try this on their Sprint Tab please let us know how it turns out.
Some users was successful on sprint tabs:
http://forum.xda-developers.com/showthread.php?p=9533444&highlight=sprint#post9533444
So to reiterate, 3g/hspa AND voice work on this build without rotos modem switcher, and it is not breaking the imei??? I am using T-Mobile US. Thanks!
Sent from my GT-P1000 using XDA App
Neuro - glad you edited your prior post to reflect that otherwise you would've had a lot of unhappy campers with shiny new bricks
I hit "thanks" button rather than "quick reply" lol
It won't brake the imei. It has nothing to do with it. I think you can brake the Imei only with a wrong unlocking network procedure.
Lindarose84 said:
Neuro - glad you edited your prior post to reflect that otherwise you would've had a lot of unhappy campers with shiny new bricks
Click to expand...
Click to collapse
Edited again. It seems that it was successful on spring tabs. read couple posts back. link to the Clubtech topic.
So again still no answer on will it allow voice and 3g on tmobile without modem switcher
neuropass said:
I hit "thanks" button rather than "quick reply" lol
It won't brake the imei. It has nothing to do with it. I think you can brake the Imei only with a wrong unlocking network procedure.
Click to expand...
Click to collapse
Still want to know does it work on tmous with call and 3g/hspa without rotos modem switcher???
Sent from my GT-P1000 using XDA App
Man you need to do some reading. I can't answer what i haven't tested. Look into 30 pages of the original post for it. I know someone mentioned about tmobile.
"and therefore enabling the phone calls option ( and 3G data + 850/1900Mhz WCDMA ) that has been purposely stripped out by certain providers, Ex: Bell, At&t, T-Mobile, rogers etc.."
I did read and your description says it does work voice and 3g so we all want to confirm this. And why are you making a tutorial on something you havent even tried
Sent from my Galaxy Tab
humm...
I have a Bell tab and flashed it with the procedure above. i posted this guide for people who are beginners with flashing stuff in order to help them and make the whole thing simpler to understand. The Providers I listed above are the ones that have been tested and worked with this firmware.
You need to dig into the forum and find out if it works on sprint tab. Or do you want me to do it for you??????
I'm pretty sure this is just a tutorial for the same thing that's been around for a while which means you will NOT get voice+3G on T-mobile without the modem switcher or getting rid of your IMEI.
Yes correct. I just made This tutorial to make the process clear seeing that all the procedures written here were all confusing.
Hi all
I would like to everyone present the first Custom Windows Phone 8 ROM for HUAWEI Ascend W1-U00.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Informations
Windows Phone 8.1 GDR1
Build 14219
Dev unlock
Interop unlock
All capabilities
Changed size partitions :
MainOS - 2,1 GB
Data - 1,5 GB
Additional
Can enable mass storage mode
Searching updates PfD
without dev account and app from market.
Available 51 Langs
ar-SA
az-Latn-AZ
be-BY
bg-BG
ca-ES
cs-CZ
da-DK
de-DE
el-GR
en-GB
en-US
es-ES
es-MX
et-EE
fa-IR
fi-FI
fil-PH
fr-CA
fr-FR
he-IL
hi-IN
hr-HR
hu-HU
id-ID
it-IT
ja-JP
kk-KZ
ko-KR
lt-LT
lv-LV
mk-MK
ms-MY
nb-NO
nl-NL
pl-PL
pt-BR
pt-PT
ro-RO
ru-RU
sk-SK
sl-SI
sq-AL
sr-Latn-CS
sv-SE
th-TH
tr-TR
uk-UA
uz-Latn-UZ
vi-VN
zh-CN
zh-TW
How to flash ?
So... The whole update process will proceed in two steps. The first step is flashing the ROM in which certain features are unlocked (required for flashing custo ROM). Performance of the system, its working, etc have not been changed. The second and last step concerns flashing Custom ROM.
! REMEMBER! Everything you do at your own risk.
Step 1 !
a) Download ROM and Flash tool
b) Run "HWDiagnosticApp (##2846579#) ", turn on "Diag settings" and reset phone.
c) Run Flash Tool , select ROM file / Config XML and click "Scan && Download".
d) Now your phone should reset and start in download mode.
If your phone does not want to start the download mode, use QPST
e) When phone displays 100%, and the inscription OK. The process of flashing rom is complete. Now you need Reset the phone (press power button on 15 sec or remove battery). Flash tool displays information about the bad file FFU, just ignore it .
Step2 !
Before you begin the process of flashing Custom ROM, make sure that you have a ROM with ability to run the device in mass storage mode. If not, flash it. Also remember that after flashing Custom ROM you need perform the first start (until you see the start menu). If you already have ROM with the ability to run in mass storage mode, you can follow the below instructions.
a) Download latest ROM + WP8CRUU, link at the bottom of the page.
b) Run device in mass storage mode
c) Run WP8CRUU.exe and follow the instructions in the program.
!!Attention!!If you have Custom ROM , you only need start the phone in Mass Storage mode and flash new Custom ROM with WP8CRUU. You do not have flash everything from scratch !!
How to Enable Mass Storage Mode ?
This is very simply, when you start your phone, press "cam" + "vol -" .
Changelog :
v1.32
- Build 14219
- Corrected some regstry entries
- Rebuild firmware packages
- Solved problem with the updates
Now you can update to W10 !
How to do it? Instruction is given below
You need set this values :
[HKEY_LOCAL_MACHINE\SYSTEM\Platform\DeviceTargetingInfo]
"PhoneManufacturer"="NOKIA"
"PhoneManufacturerModelName"="RM-976_1115"
"PhoneFirmwareRevision"="01061.00066.14235.36003"
"PhoneHardwareVariant"="RM-976"
"PhoneMobileOperatorName"="000-GB"
You can use this REG editor (working without CustomWPSystem app)
Important! You need choose "sign in with different account" in Windows Insider otherwise the program will not search for updates !
v1.10
- Fixed a bug with memory card detection
- Fixed bug with incorrect reading of the battery status
Click here to download v1.32
Click here to download v1.10
Click here to download v1.00
Super Big thanks for donations :
€10,00 EUR
$15,00 USD
$16,00 USD
$33,00 USD
$66,00 USD
If you appreciate my work, click it
Good work!
May be you should hide langs under a spoiler.
Trying not to get jealous --- Lumia user here
Great work indeed! When you say "mass storage mode" do you literally mean USB mass storage mode (view the phone's storage as a block device)? That would be... very impressive. I'm guessing you need to reboot the phone to enter such a mode though. Alternatively, if you "just" mean Full FS Access via MTP, that's still very cool.
One thought: did you include the Samsung RPC server (so that tools written for interop-unlocked Samsung phones will work)? If not, it may be difficult to port some apps; not all the relevant parts of the registry are writable even with capability unlock (unless you modified the registry ACLs) and I can't find an arbitrary registry write function in the Huawel WINMDs (although there may be one I just didn't see; I did find a read function).
GoodDayToDie said:
Great work indeed! When you say "mess storage mode" do you literally mean USB mass storage mode (view the phone's storage as a block device)? That would be... very impressive. I'm guessing you need to reboot the phone to enter such a mode though. Alternatively, if you "just" mean Full FS Access via MTP, that's still very cool.
One thought: did you include the Samsung RPC server (so that tools written for interop-unlocked Samsung phones will work)? If not, it may be difficult to port some apps; not all the relevant parts of the registry are writable even with capability unlock (unless you modified the registry ACLs) and I can't find an arbitrary registry write function in the Huawel WINMDs (although there may be one I just didn't see; I did find a read function).
Click to expand...
Click to collapse
I saw read/write dword functions somewhere in Huawei apps.
Finally. This literally might be the only way to upgrade the Tracfone version since straight talk has no plans on releasing a update. Been flashing all the foreign GDR2 Huawei W1 ROMS and all work fine but don't allow me to use 3G. Really hope this project takes off and possibly a work around for users with the Tracfone branded version of the phone.
soft of reker work in your rom?
http://forum.xda-developers.com/showthread.php?t=2685826
reksden said:
soft of reker work in your rom?
http://forum.xda-developers.com/showthread.php?t=2685826
Click to expand...
Click to collapse
You can't talk about copyright.
-W_O_L_F- said:
You can't talk about copyright.
Click to expand...
Click to collapse
I'm writting:
reker written this xap and jailbreak. I don't change original files.
GoodDayToDie said:
When you say "mass storage mode" do you literally mean USB mass storage mode (view the phone's storage as a block device)?
Click to expand...
Click to collapse
Yes ... If you can enter to Mass storage mode you need reboot phone and press appropriate buttons
anonymous007 said:
don't allow me to use 3G
Click to expand...
Click to collapse
In my ROM 3G works fine !
WojtasXda said:
Yes ... If you can enter to Mass storage mode you need reboot phone and press appropriate buttons
In my ROM 3G works fine !
Click to expand...
Click to collapse
you should try to сopy reсovery(huawei w1) in htс 8x (rom)/ if you are familiar with the format nbh
reksden said:
you should try to сopy reсovery(huawei w1) in htс 8x (rom)/ if you are familiar with the format nbh
Click to expand...
Click to collapse
Hmmm , you should stop posting **** like that in threads it doesn't belong !!!!!
HARDWARE HARDWARE HARDWARE isn't the same !!!
read this and read it real carefully.
http://forum.xda-developers.com/showpost.php?p=51233276&postcount=5
and ps , nbh is a container , in that container are another few .nb containers , and they are signed !!!
reksden said:
you should try to сopy reсovery(huawei w1) in htс 8x (rom)/ if you are familiar with the format nbh
Click to expand...
Click to collapse
It didn't work without bricking your phone, because HTC has other hardware and other bootloader!
Please stop posting stuff in development thread if you don't know about development!
I'm sure WojtasXda will find a way to do this on all WP8 devices, BUT WAIT!
please can you give us the link off your rom ?
Update... Info in first post !
WojtasXda said:
Update... Info in first post !
Click to expand...
Click to collapse
This is great!!!
Bt is the a possibility to disable 3 collums?
athloni said:
This is great!!!
Bt is the a possibility to disable 3 collums?
Click to expand...
Click to collapse
Yes, you can disable 3 rows with WPH Tweaks by @jessenic: http://forum.xda-developers.com/showthread.php?t=2486387
Sent from my RM-915_nam_usa_228 using Tapatalk
Can I install WP8.1 with the Developer Preview program after using your ROM?
xdevilium said:
Can I install WP8.1 with the Developer Preview program after using your ROM?
Click to expand...
Click to collapse
Developer Preview only check some Registry Keys then apply a key I don't remember
When you have a Interop Unlocked devices you have Developer Unlock too . So there's no problem with using Dev Preview app.
I think next preview will release in 2nd of April , Yes?
ngame said:
Developer Preview only check some Registry Keys then apply a key I don't remember
When you have a Interop Unlocked devices you have Developer Unlock too . So there's no problem with using Dev Preview app.
I think next preview will release in 2nd of April , Yes?
Click to expand...
Click to collapse
yes
---------- Post added at 05:39 PM ---------- Previous post was at 05:38 PM ----------
Where can I find "HWDiagnosticApp"?
Also will this work on Windows 8?
Our second release of custom ROM made by marass82 for Ativ S to work smoothly with latest Preview upgrade. Files system access and ability to install homebrew apps like WPHtweaks and edit the registry with SamWP8Tools.
Depends on your base firmware and later upgrading to Preview you can choose between CMK2 and CMJ1 version of modification.Install Preview first then flash the phone with choosen custom.
Features:
Added the necessary privileges (WP8.1 blocks adding privileges as before using xap, so we've added to our necessary ROM)
Additional applications under trigger the camera like: Camera360, OneShot, SophieLens HD or Samsung Shooting Mode (just install it from market)
Activity rate of data packets
Added options on / off automatically download MMS
More Times ou for the screen lock options up to Never
Export contacts to your SIM card
Added Google search engine to choose IE
Removed several applications from Samsung
Full access to system files (WP8.1 jammed full access, but we managed to work around it as the first)
Audio lock removed after restart
Our forum when you first start IE
Replaced two color accents
Interop (functional)
Amendment settings to auto backlight sensor
Two CSC included:
XEO (Poland)
DBT (Germany)
How to flash:
English - http://forum.xda-developers.com/showthread.php?t=2391138
Polish - http://www.windowsmania.pl/poradnik...nding-lub-zmiana-oprogramowanie-na-gdr3-5424/
Base firmware, aka ROM CMK2 or CMJ1 if you need one:
http://forum.xda-developers.com/showthread.php?t=2568606
Click on Select and CSC for WP8.1 custom:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resetting phone to factory settings is essential after flashing
Click to expand...
Click to collapse
Download your version and enjoy!
The NO FS mean there is no access to file system. Some of you do not like browsing folders to get into WP library
Source and more:
http://www.windowsmania.pl/romy-222...om-rom]-custom-windowsmania-pl-wp8-1-a-11199/
3rd copy of my ROM + some rare and useless features?
1) http://forum.xda-developers.com/showthread.php?t=2559622
2) http://forum.xda-developers.com/showthread.php?t=2727667
Speek to marass82, he must be newbe
djtonka said:
Speek to marass82, he must be newbe
Click to expand...
Click to collapse
But you know him well, because he is admin at windowsmania.pl like you...
If the rom is based on -W-O_L_F-´s work, at least you should give him credits. Just my opinion.
BTW when do you post the polish translation file ? I saw it´s online.
-W_O_L_F- said:
3rd copy of my ROM + some rare and useless features?
1) http://forum.xda-developers.com/showthread.php?t=2559622
2) http://forum.xda-developers.com/showthread.php?t=2727667
Click to expand...
Click to collapse
OK. All cutom roms will copy yours, because they are all created using your tools. And thank you for your work.
Is your rom contains new privileges that we got from WP8.1. and which allow for deeper changes in the registry? This so. (Obviously useless)
Does your rom have full access to system files? This so. (Obviously useless) (Anyway, I found a way to circumvent this and described on this forum. Sorry my mistake it no more repeats)
Does your ROM, you can choose an alternative application to operate the camera with the camera button?, This so. (Obviously useless) (useless to you, someone may like it)
I still have a few other changes that may be useless to you, but others may come in handy.
You probably are not interested in you that I found a way to add all privileges to WP8.1 on Ativie, nor useful. So much finished.
Is there a solution for flashing with Windows 8 pc, or still driver issue and flashing needs Windows 7 pc?
Loco5150 said:
Is there a solution for flashing with Windows 8 pc, or still driver issue and flashing needs Windows 7 pc?
Click to expand...
Click to collapse
LOL always have a spare xp machine for **** like this
Loco5150 said:
Is there a solution for flashing with Windows 8 pc, or still driver issue and flashing needs Windows 7 pc?
Click to expand...
Click to collapse
Disable Driver Signature Enforcement, then install the drivers. Works on win7, win8/8.1
marass82 said:
OK. All cutom roms will copy yours, because they are all created using your tools. And thank you for your work.
Is your rom contains new privileges that we got from WP8.1. and which allow for deeper changes in the registry? This so. (Obviously useless)
Does your rom have full access to system files? This so. (Obviously useless) (Anyway, I found a way to circumvent this and described on this forum. Sorry my mistake it no more repeats)
Does your ROM, you can choose an alternative application to operate the camera with the camera button?, This so. (Obviously useless) (useless to you, someone may like it)
I still have a few other changes that may be useless to you, but others may come in handy.
You probably are not interested in you that I found a way to add all privileges to WP8.1 on Ativie, nor useful. So much finished.
Click to expand...
Click to collapse
GOOOOOOOD, please share with us how to add all privileges to WP8.1 on Ativ S
marass82 said:
Disable Driver Signature Enforcement, then install the drivers. Works on win7, win8/8.1
Click to expand...
Click to collapse
My method:
1. Restart your computer and Disable Driver Signature Enforcement. (Press F1, F2, F5 or F7 when you press the power button)
2. In some cases you still can't install the driver due to errors so you install it manually from here.
3.Put your phone in 'Recovery Mode' by holding both the VolUp and Camera button, then hold the power button for 3 seconds while still holding the VolUp and Camera.
4. It is now detected in Device Manager. Click "Update Device Driver" and locate the path of the .INF driver. It will install successfully It will then install and the flashing tool will detect your phone.
ceesheim said:
LOL always have a spare xp machine for **** like this
Click to expand...
Click to collapse
Too much crap in my house already.
AlvinPhilemon said:
My method:
1. Restart your computer and Disable Driver Signature Enforcement. (Press F1, F2, F5 or F7 when you press the power button)
2. In some cases you still can't install the driver due to errors so you install it manually from here.
3.Put your phone in 'Recovery Mode' by holding both the VolUp and Camera button, then hold the power button for 3 seconds while still holding the VolUp and Camera.
4. It is now detected in Device Manager. Click "Update Device Driver" and locate the path of the .INF driver. It will install successfully It will then install and the flashing tool will detect your phone.
Click to expand...
Click to collapse
I need to try this!
Loco5150 said:
Too much crap in my house already.
I need to try this!
Click to expand...
Click to collapse
I use an eee 1002ha for all stuff like this
just to tell you :
on custom_windowsmania.pl_WP8_1_CMK2 there is no full file sys excess
edit:
after language Change to English us you get full file sys excess ( at least this was for me)
What is this warning "partition info does not match" after pressing start ?
The flashing tool log: (I didn´t load all binaries, only the csc)
[Channel 0] Channel Write CSC data Start!!
[Channel 0] Channel Write DBT CSC data Success!!
[Channel 0] Partition info does not Match !!
[Channel 0] Binary Download complete!!
Is this ok and I have to do a hardreset now ?
I don´t want to risk my phone at the current state of development of my IO Explorer app, but I need back the full-filesystem access.
contable said:
What is this warning "partition info does not match" after pressing start ?
The flashing tool log: (I didn´t load all binaries, only the csc)
[Channel 0] Channel Write CSC data Start!!
[Channel 0] Channel Write DBT CSC data Success!!
[Channel 0] Partition info does not Match !!
[Channel 0] Binary Download complete!!
Is this ok and I have to do a hardreset now ?
I don´t want to risk my phone at the current state of development of my IO Explorer app, but I need back the full-filesystem access.
Click to expand...
Click to collapse
its ok
just that Partition info is div then the old one on the phone ,
you get the same if you flash a gdr3 rom over a gdr1
and you always need to Hreset after a csc update .
ceesheim said:
its ok
just that Partition info is div then the old one on the phone ,
you get the same if you flash a gdr3 rom over a gdr1
and you always need to Hreset after a csc update .
Click to expand...
Click to collapse
So I have to do a hardreset now and that´s it ?
contable said:
So I have to do a hardreset now and that´s it ?
Click to expand...
Click to collapse
if you flashed the csc then yes
you could also wait and first do your stuff ( good work btw on the IO Explorer :good: )
ceesheim said:
if you flashed the csc then yes
you could also wait and first do your stuff ( good work btw on the IO Explorer :good: )
Click to expand...
Click to collapse
I could do it better with full-access to the filesystem, because on device some folders are invisible (e.g. WPSystem on the sd card), but you can browse them if you know the path. So I would like to browse on my desktop first...
The flashing process went well, but now I only can connect to the store via Wi-Fi, cellular network doesn´t connect. Any suggestions ?
Edit: My cellular network seems to be broken at all: email account doesn´t sync either.
contable said:
The flashing process went well, but now I only can connect to the store via Wi-Fi, cellular network doesn´t connect. Any suggestions ?
Edit: My cellular network seems to be broken at all: email account doesn´t sync either.
Click to expand...
Click to collapse
I've got the same problem recently, try editing the APN setting manually, add a new APN and insert as followed: APN-Name: "internet" , APN: "internet"
Leave all other fields blank/default.
Worked for me with o2 Germany.
Sent from my GT-I8750 using Tapatalk
You do everything here at your own risk. I take no responsibility for any broken devices/sdcards/your house going down on fire and everything else.
PLEASE DO NOT MIRROR THESE FILES!
Requirements:
root
ability to use mouse and keyboard
terminal emulator on your phone
What do you get for doing this?
Propably you'll be able to use a lot more bands than before. Most likely your phone will work on every place in the world now.
Check the third post for a link to OPO guide
C6903
before
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after
1. Download this zip Google it as it's banned from xda for the ability of imei change
2. Extract it and install QPST from that zip
3. Open the caller app and type in *#*#8778#*#* (it should go off the screen after you type in the last symbol "*"
3.5 Those on custom roms (tested on cyanogen 11 with s4 mini) can use the efs professional toolkit to change the mode to enable the diag port.(Thanks @blackburn !)
4. Connect your phone to your PC
5. Open ADB console
6. Type in these commands:
Code:
adb shell
su
setprop persist.usb.eng 1
7. Turn off USB Debugging, Disconnect your phone from the PC
8. Wait about 10 seconds (don't have to be exact, just let it all disconnect in the PC) and turn USB Debugging back on
10. Connect it back to the PC. It should try to install drivers. Wait until it fails to install all of them.
11. Open device manager - you will see your device model a few times. Go to details tab. Scroll down a single time on that tab. You will see MI_0x there.
12. Go through those devices until you find MI_04 under the second drop down position.
13. Select "update driver" for this device and install the htc driver from the zip.
14. Press start button and navigate to QPST -> QPST Configuration
15. Go back to device manager -> modems -> HTC
16. Find "COM*" in my case it was "COM3". It might be different for you.
17. In QPST Configuration click on "Add new port" and in "Port" type in your "COM*". In my case It's "COM3" in there. In Port label it could be anyting u want. In my case I used a Z1 so I typed IN "Z1".
18. It should look like this now.
19. Navigate to QPST/bin and open RV_NV_Manager.exe
20. press on settings -> Comport and choose your COM port.
21. Press on file -> read from phone
22. Wait patiently until it is finished. Now pay attention!
23. Go to line 1877, click it and copy the decimal number on the right side of a programme. right click - copy
24. Go to the place where you extracted the zip from the first step and start mzTool
25. On the left side you will see "Input radix" - press decimal there.
26. On the right side you will see "RF BC CONFIG" paste your previously copied number from the RV_NV_Manager.exe there.
27. You will see now what bands are you able to use on the bottom of the app in "Bit information"
28. Switch tab to "Band Preference (NV Value)"
29. In there select all GSM bands and WCDMA bands. This place is really a field of testing. In my case (C6903 LTE) I selected all of GSM and WCDMA. I wouldn't suggest you to do anyting else in here unless you know what your'e doing. Let me know if you got something interesting in there.
30. After you're done choosing what bands do you want - copy decimal number from the bottom right
31. Remove all commas from that number ( "," ) so it would be just a bunch of numbers without anything else.
32. Open RV_NV_Manager.exe from the point you left it (step 23) and paste your new number without commas "," there.
33. Press on write NV and then press on file ->write changed NV to the phone.
34. Open up the terminal emulator on your phone and write there this:
Code:
su
setprop persist.usb.eng 0
35. Reboot the device and hope you'll have the reception. If you do, hooray!
36. Type in *#*#SERVICE#*#* (*#*#7378423#*#*) to see your new bands that your phone can use!
If your phone can't boot then flash stock FTF to your device and you should have your reception back!
Enjoy!
I wanted to mention that I'm just the guy that was interested in this and the person that actually made it possible is @BlackSoulxxx all thanks go to him! He's the guy that did it! Please thank him in the second post!
PLEASE DO NOT ASK ME IF IT WORKS ON YOUR DEVICE! I DON'T KNOW. YOU HAVE TO TRY IT YOURSELF.
If you have any problems or issues here's some help from other users http://forum.xda-developers.com/showpost.php?p=55321344&postcount=3
Tested on: ZU, Z1,SP,Xperia TL,Sharp-DOCOMO Aquos Zeta SH-04F
Dangerous stuff to experiment with. Already lost 2 phone (2 expensive paper-weight with OmniBalance design -_- )
But ENJOY!
And remember to check out *#*#4636*#*# to select band (I dont advice to do that, because to revert it you will have to reflash baseband)
And the setting
@olokos
BlackSoulxxx said:
Hey, for everyone with error "execptionthrow" error pls use QXDM and search for nv 1877 and change it
Click to expand...
Click to collapse
Nexus connection
1. Remove all installed drivers.
2. Install LG United Mobile Driver
3. Enable debugging and install adb driver if it's not automatically installed.
4. Using adb issue the following commands on a separate line
Code:
adb shell
su
setprop sys.usb.config diag, adb
5. Your phone should start installing drivers, once installed under Ports in device manager there should be (* indicates a number):
LGE AndroidNet for Diagnostics Port (COM*)
LGE AndroidNet USB Serial Port (COM*)
Thanks for that @CHAMAVELI !
kevin3688 said:
For GSM HTC Phones.
Use "setprop sys.usb.diag.config diagon" instead of "setprop persist.usb.eng 1"
Click to expand...
Click to collapse
One Plus One guide
Moto Droid RAZR Guide
XIAOMI MI2 Guide
LG G3 D852 Guide
Device-specific drivers and Z2 LTE unlock here:
http://forum.xda-developers.com/showthread.php?p=55394190
LTE Unlock guide based on OPO
http://forum.xda-developers.com/showpost.php?p=56577252&postcount=455
olokos said:
Massive stuff. I'm writing it down right now. wait for it.
Click to expand...
Click to collapse
Haha ok, we all waiting ^^
Send from my XZ With My Own Personal Modified MoonWalker SuperB !
What about this thread,I don't understand. You will open a port or an app thread,right?
Mazellat said:
What about this thread,I don't understand. You will open a port or an app thread,right?
Click to expand...
Click to collapse
Much bigger than that. Look at @BlackSoulxxx signature. I'm almost done writing it all down. Hang tight
Finally did it
olokos said:
Much bigger than that. Look at @BlackSoulxxx signature. I'm almost done writing it all down. Hang tight
Click to expand...
Click to collapse
I don't see anything his sign. and waiting for you
Mazellat said:
I don't see anything his sign. and waiting for you
Click to expand...
Click to collapse
Already did it! Try it by yourself!
I forget to tell you that this can works with UB and LB If you want to unlock for non-Xperia device that power by SD PM me....
Is it also supposed to work on the LTE bands, or just GSM and WCDMA? For instance, would it reveal any 'hidden' LTE bands on LT30AT?
ArtDC said:
Is it also supposed to work on the LTE bands, or just GSM and WCDMA? For instance, would it reveal any 'hidden' LTE bands on LT30AT?
Click to expand...
Click to collapse
Yes, works with GSM/WCDMA/LTE, even with CDMA if you phone supporting them. About hidden band, just give it a try
But if your phone is 3G variant, it will unlock wcdma/gsm band only. Using LTE version, result like OP screenshot
Tempted to try this out but what happens if we mess up something? Just do a nandroid and everything is fine?
Ahki767 said:
Tempted to try this out but what happens if we mess up something? Just do a nandroid and everything is fine?
Click to expand...
Click to collapse
Reflash baseband from full ftf
BlackSoulxxx said:
Reflash baseband from full ftf
Click to expand...
Click to collapse
When i disconnect and reconnect, it just worked normally without trying to install drivers
Ahki767 said:
When i disconnect and reconnect, it just worked normally without trying to install drivers
Click to expand...
Click to collapse
Repeat the step
1. Dial *#*#8778#*#*
2. open adb
adb shell
su
setprop persist.usb.eng 1
Click to expand...
Click to collapse
3. turnoff usb debugging and unplug the phone
4. wait 10s, turn on usb debug and connect it again to pc
1. Dial *#*#8778#*#* ---> I try several times and will not turn off
erick_shadow said:
1. Dial *#*#8778#*#* ---> I try several times and will not turn off
Click to expand...
Click to collapse
When you dial it, it will dissappear right? If so, that's ok. Stay on the guide and olokos guide have some place wrong, I have correct it in #2 post
the mark is left on the keyboard and does nothing
Unlocking more bands (specifically band 12) is on the way, please be patient as there are a lot of bugs with having a modified modem firmware.
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE! YOUR WARRANTY IS VOID IF YOU FOLLOW THIS TUTORIAL!
This took like 2 weeks to figure out, I was about to give up, but then it worked. VoLTE on band 4 and 2 for T-Mobile in the USA!!
I have only tested this on my phone, but it should work on others (assuming it is still an A2). I have not verified if this works for phones converted to the 6X so if you want to try please be careful.
Alright, enough with the warnings and stuff.
1. First, enable usb debugging and plug your phone into your computer.
1. Download qpst and install it. You will also need this file . Just save it somewhere, we will use it in a minute.
2. run the following commands (note that you MUST be rooted to enable this. The mod survives returning to stock unrooted, and even survives OTA so you can unroot when finished if you want.):
'''
adb shell
su
setenforce 0
setprop sys.usb.config diag,serial_cdev,rmnet,adb
'''
3. once installed there should be an entry in your start menu. open the folder labelled qpst and select the program "PDC".
4. click the Device dropdown and select the Qualcomm device. (it may not show up first time, make sure you have installed the drivers for your device)
5. once you select your device you should see a lost of items, this can take a minute depending on the speed of your computer.
6. click the load button and select the mcfg_sw.mbn you downloaded earlier.
7. "Commercial-TMO" should now be a listing in the description. Highlight it and right click on it, hover over "SetSelectedConfig" and select "sub0". Let it load for a bit.
8. it should now say pending on the Sub0 column of the Commercial-TMO. Now click activate and let it load.
9. on your phone, you must disable reigon checking. To do so go to your phone app and type in the following: *#*#86583#*#*
10. reboot your phone.
This worked for me, I have not verified that it works for others yet, so if it works for you, please let me know. Also let me know of any bugs.
Shreenshots below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can this phone work on Metro PCS network
I tried and tried, but i cannot get PST to see my phone. I loaded qualcomm drivers and ADB drivers, nothing. Any suggestions?
Daha3ker said:
Unlocking more bands (specifically band 12) is on the way, please be patient as there are a lot of bugs with having a modified modem firmware.
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE! YOUR WARRANTY IS VOID IF YOU FOLLOW THIS TUTORIAL!
This took like 2 weeks to figure out, I was about to give up, but then it worked. VoLTE on band 4 and 2 for T-Mobile in the USA!!
I have only tested this on my phone, but it should work on others (assuming it is still an A2). I have not verified if this works for phones converted to the 6X so if you want to try please be careful.
Alright, enough with the warnings and stuff.
1. First, enable usb debugging and plug your phone into your computer.
1. Download qpst and install it. You will also need this file . Just save it somewhere, we will use it in a minute.
2.once installed there should be an entry in your start menu. open the folder labelled qpst and select the program "PDC".
3. click the Device dropdown and select the Qualcomm device. (it may not show up first time, make sure you have installed the drivers for your device)
4. once you select your device you should see a lost of items, this can take a minute depending on the speed of your computer.
5. click the load button and select the mcfg_sw.mbn you downloaded earlier.
6. "Commercial-TMO" should now be a listing in the description. Highlight it and right click on it, hover over "SetSelectedConfig" and select "sub0". Let it load for a bit.
7. it should now say pending on the Sub0 column of the Commercial-TMO. Now click activate and let it load.
8.on your phone, you must disable reigon checking. To do so go to your phone app and type in the following: *#*#86583#*#*
9. reboot your phone.
This worked for me, I have not verified that it works for others yet, so if it works for you, please let me know. Also let me know of any bugs.
Shreenshots below
Click to expand...
Click to collapse
This sounds scary. I thought volte works on band 12. If the band is missing how would it work. How can you confirm it actually works.
Hi!
I am running into the same issue of two computers (Win 7 and Win 10) that cannot see the phone. Anyone willing to help in getting PDC to see the phone? Thanks!
I have a couple questions for OP
Will this prevent any OTA?
Could you also take a screenshot of 4g while on a call?
What bugs do you experience?
I definitely see that your method unlocks some options in phone info, in the screenshots, but it doesn't necessarily prove anything if you can't see 4g while in a call and see a difference in speed. I notice the difference in speed when trying to do things on a call while on 3g, so if I were to do this I would definitely be able to tell it worked or not.
mymeatb18 said:
I have a couple questions for OP
Will this prevent any OTA?
Could you also take a screenshot of 4g while on a call?
What bugs do you experience?
I definitely see that your method unlocks some options in phone info, in the screenshots, but it doesn't necessarily prove anything if you can't see 4g while in a call and see a difference in speed. I notice the difference in speed when trying to do things on a call while on 3g, so if I were to do this I would definitely be able to tell it worked or not.
Click to expand...
Click to collapse
I would like to know this as well.
Ulver said:
I would like to know this as well.
Click to expand...
Click to collapse
If you want a specific screenshot let me know, I have been using this for a while though with no issues. The Band 12 has a lot of tuning data required and may not be compatible with all a2 devices without buying tuning equipment. (I used a friend's and hoped this was not the case) :/ I will keep working on it though. All is not lost yet.
As for the device not showing in the computer, it does require root as of the pie update because xiaomi disabled diag mode by default... :/
To enable it in the pie update you need to enter the following in adb shell for it to show up in qpst:
su
setprop sys.usb.config diag,adb
Note, do not reboot yet, rebooting resets these values..
Then re- insert the phone into your computer and it should show up.
The nice thing is that this survives ota and root removal once put on so if you want ota you can have it, just unroot once you get the mod working.
Hi Daha3ker,
I tried to enable with the mentioned commands and still PDC cannot see my phone.
Daha3ker said:
If you want a specific screenshot let me know, I have been using this for a while though with no issues. The Band 12 has a lot of tuning data required and may not be compatible with all a2 devices without buying tuning equipment. (I used a friend's and hoped this was not the case) :/ I will keep working on it though. All is not lost yet.
As for the device not showing in the computer, it does require root as of the pie update because xiaomi disabled diag mode by default... :/
To enable it in the pie update you need to enter the following in adb shell for it to show up in qpst:
su
setprop sys.usb.config acm,diag,mtp,adb
setprop persist.sys.usb.config acm,diag,mtp,adb
Note, do not reboot yet, rebooting resets these values..
Then re- insert the phone into your computer and it should show up.
The nice thing is that this survives ota and root removal once put on so if you want ota you can have it, just unroot once you get the mod working.
Click to expand...
Click to collapse
Can't seem to make the phone appear in PDC as well, I've rooted the device with magisk and have tried to input the commands as suggested but it is still not being detected...
This is what I have
Any word on this?
Update, with stock you need to enter the command
setprop sys.usb.config diag,adb
While the phone is plugged in to the computer for it to work. I was using a different set of debug tools.
I had to use the following command to get PDC to work.
su
setenforce 0
setprop sys.usb.config diag,serial_cdev,rmnet,adb
Im running Pixel Experience 20190320 rom with Magisk 18.1.
QPST 2.7.460
I used the QUD.WIN.1.1 Installer-10040.5 drivers on Windows 10 x64.
Could you unroot and relock bootloader and have this continue working and survive OTA updates?
---------- Post added at 11:18 PM ---------- Previous post was at 10:25 PM ----------
Looks like this survives a complete fastboot flash/relock. How would you reverse this and go back to stock?
---------- Post added at 11:30 PM ---------- Previous post was at 11:18 PM ----------
I want to switch back because sometimes when I make calls, it's high pitched and quiet. I can turn off voLTE to go back to the way it was, but would be nice to be stock again.
What bands it's unlocked?
In Brazil is primordial that b28 is unlocked to use Volte (700 MHz)
joaomiguelsm said:
What bands it's unlocked?
In Brazil is primordial that b28 is unlocked to use Volte (700 MHz)
Click to expand...
Click to collapse
Doesn't unlock any bands, just enables voLTE on T-Mobile in the USA. Unfortunately, it's pretty buggy, maybe due to recent updates.
Ulver said:
Doesn't unlock any bands, just enables voLTE on T-Mobile in the USA. Unfortunately, it's pretty buggy, maybe due to recent updates.
Click to expand...
Click to collapse
Oh, sad
This is the worst thin of Xiaomi in Brazil
PDC not recognizing phone
Hi,
I've been trying to get this working off and on for a couple of weeks. I can't get PDC to populate the drop down menu. I am able to get QPST to recognize the phone after doing :
su
setprop sys.usb.config diag,adb in an adb shell. After those commands, the Qualcomm driver loads (according to device manager). QPST configuration finds the phone on COM9. But when I load PDC I get nothing. Any thoughts? The voice calling on 2g in New York is horrible.
Thanks, Mike
mtrohan said:
Hi,
I've been trying to get this working off and on for a couple of weeks. I can't get PDC to populate the drop down menu. I am able to get QPST to recognize the phone after doing :
su
setprop sys.usb.config diag,adb in an adb shell. After those commands, the Qualcomm driver loads (according to device manager). QPST configuration finds the phone on COM9. But when I load PDC I get nothing. Any thoughts? The voice calling on 2g in New York is horrible.
Thanks, Mike
Click to expand...
Click to collapse
im getting same problem... can solve??
pleaaaase... need help.