Realy strange, USB 3 is recognized and selectable on the rom my G900F is shipped with the (TNL ANE2 T-Mobile Netherlands), but it doesn`t show up on my Dutch PHB ANG9 rom. Tried every port, have a usb 3 cable but its undetected and could it be rom related i`am starting to think.
Anyone else have this issue or has anyone enabled usb3 on a non-inital rom?
Related
Hello,
I am not sure if this is a issue with CM or my phone. But recently when i have my phone connected through usb, and i try to enable usb tethering... The check mark does not appear but i can see the network adapter on my pc. It states a cable is unplugged. I have tried it with usb debugging on and off. The wifi tethering works without any problems. Just cannot seem to select the usb check box. I have tried different cables, and differnt usb ports and pcs but all with the same result.
Can anyone please advise?
Thanks
I have that exact problem with latest CM11 on SGS4 International version.
I don't know since when this problem existed, however.
Please post if you find a solution.
[same problems detected here: http://forum.cyanogenmod.com/topic/86701-usb-tethering-broken/]
Hi folks I have a rooted N7 and have used plenty of different ROMs in the last 2 years. Since installing KK 4.4.4 I cannot connect to my computer by USB, neither Windows 8 or Linux.
OTG is working as I can access external USB cards, there is nothing wrong with the USB leads, needless to say I have tried different leads in different USB ports, the tablet still charges when connected by a USB cable.
In settings, storage has MTP activated, I have tried PTP and it still will not work.
In developer I have activated USB / Android debugging.
I am using multirom and have done so since it came out
My main rom is MAHDI 2.7
Secondaries areCM11 20140903 and pac_grouper-1-20140903
Any help would be appreciated.
Think it's solved
All my other Android devices connect with my computers by usb so I have to conclude that there is something wrong with the N& OTG port.
Okay so I am really stuck here... hopefully someone can help me
Connecting my S5 with Samsung Stock ROM to my Laptop (Windows 8.1) via USB 3.0 cable gave me three options:
USB-Connection (PC):
connect as
MTP
PTP
MTP (USB 3.0)
Now I have tried AOKP ROM and also CM11 ROM for my S5, but as problemless as USB 3.0 support worked while on STOCK ROM..... as confused I am now....
Connecting my S5 running AOKP/AOSP ROM with USB 3.0 cable to my Laptop now only gives me these two options:
MTP
PTP
When copying files with AOKP/AOSP ROM running its obviously NOT USB 3.0 speed. I am quite sure my Laptop has the required drivers installed, as USB 3.0 support worked just fine with the Samsung Stock ROM.
I thought this must be a well known problem/issue. But so far, I looked hours on Google and no answer found.
I also posted in the Cyanogemod Forum - Galaxy S5 Support Section --> no reply
I am really really stuck. I feel like there must be an easy solution, but I just don't get it..
So really would appreciate any help you can offer!
Thanks!
Perhaps my port has gone bad. Nothing works, otg , computer connection through mtp. It will charge though, whether connected to computer usb or charger. Only reason I have even noticed this , is a want to flash original software from lg tool. Anyone got any ideas? Or do I need a new usb board? I'm on cloudy 2.0. Oh btw, I tried to mount from twrp and nothing happens. Says unable to mount otg device. I assume that rules out it being a rom problem? I've tried two different otg devices, and three different cables to my computer. I'm beginning to think it's hardware issue. But before I go through all that figured I would see if anyone else has any ideas?
I'm having this same problem. I first noticed it when I installed cloudy-g3 on my lg g2. The problem persists even when I switch to other roms I have installed with MultiROM. Without the ability to detect/access via usb/adb my phone is semi-bricked, without the ability to revert to stock via kdz because usb connection isn't detected.
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
Try disabling and enabling USB debugging while the phone is connected.
GDReaper said:
Try disabling and enabling USB debugging while the phone is connected.
Click to expand...
Click to collapse
Thanks for your reply, i've tried this many times, even when typing "adb devices", adb can't find my phone and it doesn't appaer in windows Device manager
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
I have the exact same probleme... Odin work but no mtp....Have you found a solution ?