Database Users

[KERNEL]TalonDEV 0.5.1-RC1 (0.6.0.1) [OC/UV][Voodoo Color & Sound v10][ZRAM][EXT4]

[KERNEL]TalonDEV 0.5.1-RC1 (0.6.0.1) [OC/UV][Voodoo Color & Sound v10][ZRAM][EXT4]
TalonDEV is an i9000 reoriented kernel for use with I9000 Samsung Gingerbread Roms (JVQ-JVR-JVS-JVT..etc..)
This is for the Captivate ONLY, the i9000 version can be found HERE
This kernel is still in a heavy development stage! So there may be bugs!! (hence the DEV tag)
Current Co-Devs - Kodos96,Ytt3r & zacharias.maladroit
Special Thanks to Xcal (for the reorient)
Make sure to support these devs, if it was not for them, Talon would not eXistZ
As always, flash at your own risk, im not responsible for any damages!]
Talon Source can be found on Github and Google Code
Stay up to date with latest changes on Twitter
Remember, I cant fix stupid or lazy. Please read the whole OP and the first and last 5 pages of this thead!
Custom Boot Animations
The bootanimation.zip needs to be /system/media/sanim.zip <- notice the name change
CIFS Support
Make sure you point to "/lib/modules/cifs.ko" instead of "/system/lib/modules/cifs.ko", it is NOT a
symlink as "/lib/modules/" is actually part of the ramdisk and is a seperate directory.
Logcat Instructions
To enable/disable Logcat, type "logcat-enable" or "logcat-disable" in a terminal emulator and reboot
Lowmemorykiller Settings
Talon kernel includes Kodos96's "LMKSet". You can adjust the PRESET=X value in /etc/ram.conf ..
The presets are listed in the file, recommended settings are set by default. Reboot to take effect
Also make sure theres no "ramhack" scripts in /etc/init.d/ , if there is, delete it and reboot.
To install:
Copy zip to sdcard
Flash via CWM
Enable/Disable Voodoo Lagfix in CWM->Voodoo
Delete Voltage Control settings in CWM->Advanced
Voodoo Color:
With the new ported Nexus S framebuffer driver, we are now able to control
voodoo color via the Voodoo Control App..So if the screen is to yellow for your
liking, you can adjust the RGB multipliers to even it out.
Conservative Governor
Conservative is now a module, to load on every boot, dload file below and place in /etc/init.d/
make sure to remove the .sh at the end of the filename and reboot
http://berryfx.com/RobBeane/Kernel/Files/enable_conservative.sh
Click to expand...
Click to collapse
Code:
[B]Kernel Features[/B]
Based on latest Samsung Opensource Gingerbread Sources
Voodoo Lagfix and Sound v10
Voodoo Color for 2.3.4
Ported Nexus S Framebuffer
mDNIe based on Speedmod
BLN Support from Neldar
Custom Voodoo CWM 3.0.0.5
Updated to latest Jhash3
340MB RAM Free (w/ 720p)
OC/UV support up to 1.2ghz
Swap + ZRAM (compcache)
Wired Headset Support
Audio Dock Support
Battery Polling set to 60s
Set Light Sensor Polling to 1s
Sched_Autogroup v4 (per sessions)
TinyRCU (smaller memory footprint)
SIO / VR / BFQv2-r1 IO Schedulers
Tweaked Ondemand Governor
Stochastic Fair Blue (SFB) network scheduler
Updated to latest Samsung Source
Lots of Upstream Linux/AOSP fixes
CIFS/TUN Support
Upcoming Features <<-Dont ask when!
More tweaks/options added in CWM
Plus more! Alot of things still to come..
--Known Issues
>>Official Talon Issue Tracker<<
Download Older Versions Here
Mirrors For All Builds Found Here
Now CWM flashable!
NOTE Zip will wipe cache/dalvik cache during flash, so first boot will take longer
Stable Versions
352MB versions break 720p video recording
TalonDEV 0.5.1-RC1 340MB and BIGMEM
Test Versions
TalonDEV 0.6.0.1 340MB and BIGMEM NEW OC APP!
NOTE Make sure you are using BusyBox v1.17 or 1.19 before flashing, as
v1.18 (as most roms use), does not have runparts and scripts will not work
Code:
[B][SIZE="3"]Changelog[/SIZE][/B]
[B]0.5.1-RC1[/B]
new tweaked LMK settings
updated 'MemoryFreak 1.23"
updated to JVT initramfs
updated to 2.6.35.13 base
updated latest samsung source
added new kernel boot logo
disabled sched_autogroup
disabled more kernel debug
upstream fixes for ZRAM
upstream fixes for ext4
upstream fixes for mm/sched
upstream fixes for ARM/S5P
upstream fixes for rcu/TinyRCU
upstream fixes for lowmemkill driver
use 'hard float' optimizations
set usb charging lock to 100mhz
USB signal and speed improvements
introduce OndemandX CPU Governor
introduce Smartass2 GPU Governor
added sampling down factor to Ondemand
fix issue with UV not working correctly
switch to TinyRCU (smaller memory footprint)
XZ kernel compression; initramfs to none
tons of general fixes from zacharias.maladroit
Linaro Android (GCC 4.5.4) + O2 and Graphite flags
[B]0.4.3[/B]
revert back to 2009q3 toolchains
disabled GPU OC (does not work yet)
[B]0.4.2[/B]
update to 2.6.35.13 (still shows 2.6.35.7)
added BFQv2-r1 I/O Scheduler (SIO default)
fully ported mDNIe driver from nexus
tweaked mDNIe UI settings similar to speedmod
fix colour multiplier to avoid yellow tint
tweaked lowmemorykiller driver
revert lmk settings similar to old #7
added boot progress bar during boot
arm: Allow CPU-supported unaligned accesses
add support for BT_PAN, Apple Magic Mouse + more
fix .int_volt on higher frequencies (thnx Cy4n1d3)
set kernel log buffer size to 4kb (from 128kb)
ashmem: fix deadlock when system is low on memory
compiled with 4.5.1 toolchains (RIL with 4.4.3)
removed unused governors; conservative now module
UV for LCD 3.0v->2.6v, RAM 1.8v-1.6v, ADC 3.3v->3.0v
some PM and battery runtime upstream fixes
[B]0.4.1[/B]
ported nexus s framebuffer driver
ported Voodoo Color for 2.3.4 (control w/ [COLOR="Red"]Voodoo app[/COLOR])
updated to voodoo sound v10
fixed compass postion for i9000
some rework/cleanups to initramfs
introduce 1300mhz version
CFS load balancing improvements
some fs/sched improvements
add fixes from CK patchset
updated to JVQ initramfs contents
introduce V(R) IO Scheduler
tweaked voltages some
disabled iostats for less overhead
tons of fixes from zacharias.maladroit
some fixes to sched_autogroup
newly tweaked lowmemkill settings
[B]0.3.1[/B]
added sched_autogroup patch
added configurable gpu oc (for future use)
fix BLN not working for some users
introduce non-oc version of talon
independent oc versions (1200/1400/1440)
compile wifi as Os instead of O2
set wlan power on delay back to 80ms
use samsung bootanim when no custom zip found
[B]0.2.2R2 - JVP[/B]
Enabled Voodoo Debug for Lagfix
Fixed mounting issues with system in cwm
[B]0.2.2 - JVP[/B]
added 1.6ghz as max overclock
set usb charging clock to 200mhz
some GPU changes from Morfic
few updates to wifi driver from aosp
some security improvements from fugumod
use Speedmod color/sharpness fix
added "power off" & "reboot download" to cwm
added "voodoo lagfix menu" to cwm
add upstream fix for ZRAM (compcache)
added voodoo JVP 2.3.4 initramfs
cpuidel menu governor upstream fix
plus few other random fixes
[B]0.2.1 - JVH/JVO/JV9+ ONLY![/B]
added zram (compcache)
updated lowmemkill settings
compiled with O2 instead of Os
cwm verify battery stats wiped
fix issue with 1ghz step
switch back to ondemand governor
reverted most upstream fixes
disabled printk in kernel
more random fixes/updates
updated to voodoo sound v9
added BLN support from neldar
switch to gzip initramfs compression
new boot logo (courtesy of Vivified)
possible fix for wifi sleep battery drain
updated to latest samsung source
fixed KTLO with new samsung source
updated to jvh version magic and initramfs
compiled logcat (logger.ko) as a module
[B]0.1.6[/B]
set initial max frequency to 1ghz
enable asynchronous I/O support
disable some kernel debug
some ARM optimizations
slight cosmetic change to CWM
new lmk settings from kodos96
reverted OOM rework/fixes
attempt to fix CIFS issue
[B]0.1.5[/B]
Only use gamma 2.2
More upstream fixes and reworks
Add BigMem version (no 720p recording)
Adjust LMK settings for tweak app
Adjust default readahead values
[B]0.1.4[/B]
Add 341MB RAM (kodos96's config)
Revert back to stock refresh rate
[B]0.1.3[/B]
Revert back to old touchkey driver
Fixed Issue with KTLO
Compiled sound/soc/codecs as O2
[B]0.1.2[/B]
OC support up to 1.2ghz
Interactive governor by default
Add CIFS/TUN support
Few upstream improvements
[B]0.1.1[/B]
Initial release
To check frequency time used, use Storm717's app HERE
Adjust CPU/GPU OC/UV settings with Shane87s app 'Control Freak' HERE
Talon kernel is now available for SGS i897/i9000, MTD i897/i9000/Vibrant, ACE Inspire/DHD
Thanks to Hardcore, Ytt3r, Xcal, Supercurio. Raspdeep, sztupy, DG, Laststufo, Kodos96, zacharias.maladroit, Kang, lippol94, Netarchy, TheEscapist, TKGlitch, Lukiqq and Morfic (if I forgot you, let me know)

Awesome! Can't wait to flash

You are the man.....looking forward to the kernel.

LOL Disregard my PM. I can't wait to flash this up!

Can't wait!
This end of 24 hours or that end?

excellente!! looking forward to test this on *ahem*

Elisha said:
Can't wait!
This end of 24 hours or that end?
Click to expand...
Click to collapse
Hopefully sooner, still wanting to add/fix a few things before release, should get some time later on tonite to really work on it and depending on how it goes then..might release sooner than 24hrs (thats a BIG maybe)

existz said:
Talon Kernel is an i9000 sourced 2.3 kernel for use with latest Gingerbread
This is a preview, kernel is still in a heavy development stage! So there may be bugs!! (hence the DEV tag)
This is a PREVIEW, will have kernel uploaded within 24hrs, still working out a few kinks for release
As always, flash at your own risk, im not responsible for any damages!
Get support at #suckerpunch
Latest sources can be found on Github
Stay up to date with latest changes on Twitter
Kernel features:
-Reorient by Xcal + CWM recovery
-Uses Nexus S touchkey driver
-Updated Jhash3
-Wired Headset support
-Audio dock support
-Voodoo Sound v8
-Battery polling set to 60s
-Set light sensor polling to 1s
-UV support up to 1ghz (thanks to Ytt3r)
-Few upstream fixes
-Disabled Android Logger (Logcat)
-CONFIG_HZ=100
Upcoming features:
OC support
Color and Sharpness fix
SIO Scheduler
Smartass/Interactive governors
Lagfix support
More bug/upstream fixes
Versions
Onix-2.x.x-OC.tar = Odin flashable,OC/UV,Kernel HZ=100
Onix-2.x.x-OC.zip =CWM flashable,OC/UV,Kernel HZ=100
TalonDEV v0.1.1
-Initial release
To check frequency time used, use Storm717's app HERE
Thanks to Xcaliburinhand, Ytt3r, Morfic, DG, Hardcore, SuperCurio, Raspdeep and everyone else! (If I forgot you let me know and ill add you)
Click to expand...
Click to collapse
Awesome! Thanks. I will upgrade to GB soon and was hoping you'd have a compatible kernel soon. I'm glad to see UV and no OC at this point. I think I am going to stop OC'ing since I never really need it. However, I do still UV since once I find the "stable" settings for my phone, it will only help. However, I am curious how "much" people think UV helps with battery life. If it isn't significant then I might just select very safe UV settings so I don't have to spend time testing and can adjust after seeing real usage. Opinions?

TEASE! Can't wait!

Will this flag on cwm 3, out still 2.5? I've noticed a GB uses 3.0 alot.
Sent from my GT-I9000 using XDA App

mrhaley30705 said:
Will this flag on cwm 3, out still 2.5? I've noticed a GB uses 3.0 alot.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Right now it has 2.5.1.2...will probably update to cwm3 later on though

Dude your awesome... any word on BLN? I haven't seen anyone mention it, I was wondering if there was a problem porting it to 2.3.
Thanks again!
-Rich

Thanks. We appreciate your hard work.
Sent from my GT-I9000 using XDA App

Amazing!
10 char

Are there any issues with the phone shutting down during charge as was with 2.2. I just now flashed to 2.3 and so far loving it, I can only imagine what OC/uv would do to this beast
Oh and yeah for me I finally made it to the front pages of a soon to be exploding thread.

Wewt!
sent using a phone.

Cooooooool.

garringm said:
Are there any issues with the phone shutting down during charge as was with 2.2. I just now flashed to 2.3 and so far loving it, I can only imagine what OC/uv would do to this beast
Oh and yeah for me I finally made it to the front pages of a soon to be exploding thread.
Click to expand...
Click to collapse
I have yet to have a charge death, been running it for a few days, but I cant say for 100% as I haven't tested with alot of different users, but so far I've had no problems with it...
The only problem I see right now is that UV settings wont stick on reboot..I don't know if its just there's no init.d support yet, or if its something with UV.. I haven't got a chance to look at it yet, but its something I want to figure out before release. .atleast figure out what the problem is anyways

Waiting patiently for that voodoo that you do so well. Thank you all for such awesome work
Sent from a rock on fire in the middle of the sea

Can't. ****ing. Wait.
Herp derp Captivate XDA app.

[KERNEL] Semaphore ICS 1.2.6c

This is a kernel based on the pawitp's one and it works for Android 4.0.x ICS ROMs.
Features
- LiveOC
- Custom Voltage
- Voodoo Sound (implemented by pawitp)
- BLN
- 373.5MB - 398.7MB available RAM
- Compiled with Linaro 4.7.1
- O3 optimization
- Semaphore Script Manager 0.75
- Auto brightness driver
- Touch Wake
- Vibration intensity
- Deep Idle
- USB host driver
- Governor ondemand (default)
- ondemand: sampling_down_factor tunable by momentum, smooth_ui
- Governor conservative (module)
- Governor smartassV2 (module)
- Noop I/O scheduler (default)
- Deadline I/O Scheduler (module)
- Simple I/O Scheduler (module)
- Netfilter (iptables) as modules
- CIFS as module
- TUN as module
- Logcat disabled (as module only)
- Standard network packet scheduler
- Kernel log buffer size 4KB (from 128KB)
- Reduced debug info
- TinyRCU
- WiFi PM_MAX when suspend
- /system/etc/init.d directory creation if not exist
In order to load various modules of the kernel and enable or disable features use HM.Carbide's Semaphore Script Manager application. It automatically copies and runs the respective scripts from /res/scripts to /system/etc/init.d directory. The scripts:
- S05enable_oc_0800 (disable overclocking - caps max freq to 800Mhz)
- S05enable_oc_1000_default (disable overclocking)
- S05enable_oc_1100 (enable overclocking - max freq 1100MHz)
- S05enable_oc_1140 (enable overclocking - max freq 1140MHz)
- S05enable_oc_1200 (enable overclocking - max freq 1200MHz)
- S10enable_gov_conservative (load and enable conservative governor module)
- S10enable_gov_ondemand_default (enable ondemand governor)
- S10enable_gov_smartassV2 (load and enable conservative smartassV2 module)
- S15enable_sched_deadline (load and enable the deadline I/O scheduler module)
- S15enable_sched_noop_default (enable noop scheduler)
- S15enable_sched_sio (enable and load SIO scheduler module)
- S20enable_netfilter (load netfilter modules for firewall or WiFi, USB tethering)
- S30enable_logger (enable logging)
- S35enable_tun (load tun module)
- S40enable_cifs (load cifs module)
Custom Voltage may be configured with Voltage control or similar applications.
For more information check the semaphore kernel website: www.semaphore.gr
For questions or issues about Semaphore Script Manager please visit HM.Carbide thread
Thanks to Superuser, you may download a wonderful custom bootanimation for CM9 from http://www.semaphore.gr/downloads/boot-animations
Thanks to
pawitp for his kernel.
geokilla for first testing Captivate version
zacharias.maladroit for his useful information about CM's initramfs
HM.Carbide for his Semaphore Script Manager application.
Ezekeel for LiveOC, Custom Voltage
sztupy for USB host driver
koush for CWM
xcaliburinhand for his work about dock support
mialwe for his vibrator intensity and other fixes
ShadowInkDesigns for Android logo
All people who support this kernel by testing, reporting issues, donating or simply using it.
Change log
1.2.6c (11/07/2012)
- USB mass storage disable write speed cache support (thanks kasper_h, DerTeufel1980 for the hint)
- CWM: Allow key to repeat on hold (thanks to FaultException, koush). Works for volume up, down and touch key menu (as down)
- CWM: fix selection bar color when battery < 21%
- CWM: upstream sync (thanks to koush) *
- initramfs sync some changes with CM9 (adb works in root by default in recovery)
- compiled with linaro 4.7.1 201206
Normal versions (for CM9 or ROMs without hugemem configuration)
1.2.6c
- 373.5MB - 385.7MB
For Slim ROM or patched ROMs with hugemem configuration
1.2.6sc
- 386.5MB - 398.7MB
* Please note that due to changes in nandroid backup/restore, previous versions of Semaphore can't restore backups from version >= 1.2.6. To be on the safe side, please renew your backups.
1.2.5c (20/06/2012)
- rebased to 3.0.17 (thanks to trailblazerz11 and eugene373 for their github)
- compiled with Linaro 4.7.1 toolchain (thanks to trailblazerz11 for his help)
- O3 optimization flag
- upstream sync (fixes for cdma in-call volume and mic gain included, thanks to pawitp, efpophis)
- WiFi PM_MAX when suspended
- fixed 800MHz underclocking
- changed boot splash screen
- Bootloop detection (if no normal boot is detected the phone will be forced to recovery in next boot) *
- bugfix: enabling Wi-Fi hotspot twice (copy the new netfilter script in order this to work by disabling and then enabling again netfilter in Semaphore app)
- creation of /system/lib/modules if does not exist
* It doesn't mean that this will necessarily resolve the known bootloop issue, but it may help on bootloops because of bad OC/UV etc.
Normal versions (for CM9 or ROMs without hugemem configuration)
1.2.5c
- 373.5MB - 385.7MB
For Slim ROM or patched ROMs with hugemem configuration
1.2.5sc
- 386.5MB - 398.7MB
1.2.1c (20/05/2012)
- New initramfs (thanks to Mialwe for his cooperation on this)
- Bigmem reservation optional through Semaphore app (bigmem breaks 720p video recording) *
- Smooth UI implemented in conservative, smartassv2 (selected as separate option)
- Semaphore Script Manager application 0.75 (thanks to HM.Carbide)
- Fast Charge support (thanks to Chad Froebe) implemented as module **
- L4 (100MHz) int volt 1100mV (as GB)
- upstream updates
- Dropped LMK scritps
Variations:
Normal versions (for CM9 or ROMs without hugemem configuration)
1.2.1c
- 374.2MB - 386.4MB
For Slim ROM or patched ROMs with hugemem configuration
1.2.1sc
- 387.2MB - 399.4MB
* Needs reboot to takes effect. If the phone shuts down needs additional reboot.
** Enables support for fast charge. It does not enable the feature.
Deep Idle Guide and FAQ
Full changelog: http://www.semaphore.gr/changelog/ics-version
Sources
The Linux Kernel
Samsung Kernel sources
Semaphore kernel sources
Please use it at your own risk!
The attachment zip files are for flashing from CWM recovery.
The attachment tar files are for flashing through Heimdall/ODIN.
Attachment files md5sum:
a81c272685f6aecf2e8381fe040deefa Semaphore_ICS_1.2.5c.zip
731f77a4ba6a5eea1b67acd5694a4bf7 Semaphore_ICS_1.2.5sc.zip
75d501c3c18de633f471cde32038d220 Semaphore_ICS_1.2.5c.tar
b40fcfae1bcbf5169189334fdafc895e Semaphore_ICS_1.2.5sc.tar
43dd519524a436a8fb9f954a54a940cb Semaphore_ICS_1.2.6c.zip
4d1530d361f5387eede45918283b903e Semaphore_ICS_1.2.6sc.zip
776b7f987471c48c7edabe7e63f21c14 Semaphore_ICS_1.2.6c.tar
79e6845051007a1d6a1afa7059106098 Semaphore_ICS_1.2.6sc.tar
Alternative download from http://www.semaphore.gr/downloads/captivate-ics

Very Nice to see a Semaphore ICS kernel Downloading now
Oh yea, Obligatory "First"

Great
I flashed ICS 0.9.7c on Fusion ICS Beta ....
What could go wrong? Nothing its a Semaphore Kernel !
Been using Semaphore on Mosaic and I loved it ...
Hopefully my battery life will be much better.
Thank You Semaphore ! ( creator - testers - and crew )

Just flashed this on the newly released Elite rom, everything works as expected, supersmooth.
But just as Glitch, the didle doesn't work, after activation from the app, when phone goes to sleep it never wakes up and i have to do battery pull or reset to get it on.

anishmahadikz said:
Just flashed this on the newly released Elite rom, everything works as expected, supersmooth.
But just as Glitch, the didle doesn't work, after activation from the app, when phone goes to sleep it never wakes up and i have to do battery pull or reset to get it on.
Click to expand...
Click to collapse
I have found Didle to be unreliable. I just don't enable it. There was a tutorial on how to get it to work, but you will have to search for it.

warri said:
I have found Didle to be unreliable. I just don't enable it. There was a tutorial on how to get it to work, but you will have to search for it.
Click to expand...
Click to collapse
I have read in glitch thread that flashing i9000 bootloader helps and didle is working for people after changing the BL's.
I will try it in the weekend.
But sans that this kernel is running quite well.

No problem stratosk!
I think the concerns in my PM are ROM related... Maybe Grubby 0.9.0 is using an old CM build. I haven't done much research yet.

ahh finally the semaphore thanks stratosk I thought you have forgoten the captivate community nice to see you back supporting us

Just installed and running well. I had some issues coming from Icy Glitch so I froze NS Tools via TiBu and using Semaphore App instead now. I also had some reboots when trying to OC, but setting back to 1Mhz made it smooth again.
Thank you for supporting us Captivate users

DIDLE really doesn't do anything worthy of using it. They thought it would be cool but it effects aren't that noticeable in real life. So word from the wise, don't use it....

Thanks
I'll try it!

yay...Semaphore is BACK for ICS!!! i actually moved onto the SGS2 for AT&T but still using my cappy for media purposes....awesome...thanks mang!!

Ok im getting constant reboot when I enable the 800mhz from the semaphore app no live oc or anything and also shouldn't ondemand 40 sampling rate should stay on 40000? when the screens turns off then turn it back on sampling rate is on 10000 again is that normal? I have the 100mhz enable when gpu is inactive if that has something to do with it. Other than that everything works so smooth great job again stratosk thanks again for bringing another great kernel for ics on captivate

sinichi21 said:
Ok im getting constant reboot when I enable the 800mhz from the semaphore app no live oc or anything and also shouldn't ondemand 40 sampling rate should stay on 40000? when the screens turns off then turn it back on sampling rate is on 10000 again is that normal? I have the 100mhz enable when gpu is inactive if that has something to do with it. Other than that everything works so smooth great job again stratosk thanks again for bringing another great kernel for ics on captivate
Click to expand...
Click to collapse
Thanks mate for reporting mate.
I checked ondemand40. This is an old bug. I resolved it and here it is, again. I forgot to include some code. Will be ok in next version.
I will check the 800MHz script and let you know.

Is LiveOC and Custom Voltage an app? Or is it built into the kernel?
How do the scripts such as LMK, SD card read ahead, etc. affect the performance scripts that came with the ROM? I noticed that the ICS ROM I'm using comes with its own performance scripts and voltage control, etc.

Would someone mind explaining what TUN and CIFS does?

geokilla said:
Is LiveOC and Custom Voltage an app? Or is it built into the kernel?
How do the scripts such as LMK, SD card read ahead, etc. affect the performance scripts that came with the ROM? I noticed that the ICS ROM I'm using comes with its own performance scripts and voltage control, etc.
Click to expand...
Click to collapse
You can find more info here about live oc its overclocking the bus speed http://forum.xda-developers.com/showthread.php?t=1288015 you use nstools app to live oc and the custom voltage means that the kernel support oc and uv custom tweak by the dev of the kernel. About the performance script it depends on the script there is lagfree tweaks roaming around and thunderbolt tweaks I suggest to ask more on the rom dev what kind of performance tweak he included on the rom since he knows more what kind of tweaks he included on script itself. On my opinion if you see same script (ex. the sdcard tweaks or any oc uv script) its better to use the script that bundles with the semaphore to prevent conflict
Sent from my SAMSUNG-SGH-I897 using xda premium

i like it.thanks.

popfan said:
Would someone mind explaining what TUN and CIFS does?
Click to expand...
Click to collapse
TUN is a module required in the kernel for loading up VPN (OpenVPN and DroidVPN)
CIFS module enables you to mount a remote network share on your device.

Any chance you're making an 0.9.8 for Slim ICS specific for the captivate?

[Q] [Nexus 7 2012 Wifi only] Kernel with nfs support for CarbonROM 4.4.2

Hello there,
I'm looking for a way to mount nfs shares of my NAS and (debian wheezy) server in the filesystem for access of my media files.
I thought for long that it would be the most natural thing to do for my (linux based) mobile devices in a linux server environment, but it seems I'm far off.
So far I have been unable to mount these nfs shares of mine to the Nexus 7 (grouper) device running a Carbon ROM 4.4.2 Nightly Build from march this year (CARBON...20140302-0433.zip) with CifsManager, most likely due to its lack of kernel support (version 3.1.10--g90cc2cb1 bigshotrob...).
May one of you recommend a kernel that supports nfs, cifs and utf-8 for this build? I restrain from updating it as it is running smoothly and without problems (Remember? Never change a...) and I don't like to invest much time for the reconfiguration and other related stuff.
I know there is M-Kernel (http://forum.xda-developers.com/showthread.php?t=2168787) out there that claims to have exactly the requested support and compliance to the CarbonROM series. But I'm unable to sort out what version of the kernel would match my build of the ROM.
I understand that the most actual release is for versions 4.4.4, but the changelog and >200 posts I've browsed do give no hint which release was compiled for 4.4.2 ROMs.
Please note, I would ask directly in that respective thread in the development section if I could, but owing to the (imho pretty stupid) 10 post restriction of newcomers I am unable to post there.
Edit: Not necessary anymore, got my postings ...
Accordingly, my second question would be, if someone with more than 10 posts would be so kind and ask the following questions for me in the given thread?
Namely:
What version of the kernel would fit my 4.4.2 CarbonROM Build and where could I obtain it?
Does anyone had success to mount nfs shares with it (or cifs, if not) ?
Edit end
That and any alternative ways/hints to get nfs going would be highly appreciated!
Thank you very much,
Nix
Specs Summary:
Nexus 7 2012 Wifi only
Carbon ROM 4.4.2 Nightly Build (CARBON...20140302-0433.zip)
Kernel 3.1.10--g90cc2cb1 bigshotrob...

Simple. Give my kernel a shot. It uses an AnyKernel installer, which then works with both ext4/f2fs ROMs. If you don't want experimental dt2w/s2w, flash 1.6.1.
Edit
http://vp-zp.com/snuzzo/kernels/grouper/
Forgot my link lol

Snuzzo said:
Simple. Give my kernel a shot. It uses an AnyKernel installer, which then works with both ext4/f2fs ROMs. If you don't want experimental dt2w/s2w, flash 1.6.1.
Click to expand...
Click to collapse
Thank you for the reply snuzzo,
would you mind to give some details where to learn more of its features and where to find it?
Then I'll have a look at it.
EDIT:
Thanks for the link! But exactly what version do I have download for my Carbon ROM build above, if I'd decide to use it that is?
Presumably .../kitkat/Funky...??
BTW, are there some feature lists or such things? I'll probably browse the forum a bit, I suppose?
Cheers, Nix

Anykernel Installer. You can flash it on either an ext4/f2fs rom for /data compatibility
Overclock with 1.3Ghz max default
Under/overvolt
IO Scheduler additions: SIO BFQ ROW
CPU Governor additions: Lazy Lagfree Scary Lulzactive Wheatley (could be few more but thats from memory)
DoubleTap2Wake/Sweep2Wake in 1.6.2, disabled in 1.6.1(experimental)
Kexec Hardboot for MultiRom
Dynamic Fsync Control
Stock Google 4.7GCC prebuilt toolchain.
CIFS.
Theres a few other tweaks I made for overall UI performance other than that it follows CM-11.0 source. I build these for my own personal use but upload to share them for those who want what I run. You will want 1.6.2 or 1.6.1.

Snuzzo said:
Anykernel Installer. You can flash it on either an ext4/f2fs rom for /data compatibility
Overclock with 1.3Ghz max default
Under/overvolt
IO Scheduler additions: SIO BFQ ROW
CPU Governor additions: Lazy Lagfree Scary Lulzactive Wheatley (could be few more but thats from memory)
DoubleTap2Wake/Sweep2Wake in 1.6.2, disabled in 1.6.1(experimental)
Kexec Hardboot for MultiRom
Dynamic Fsync Control
Stock Google 4.7GCC prebuilt toolchain.
CIFS.
Theres a few other tweaks I made for overall UI performance other than that it follows CM-11.0 source. I build these for my own personal use but upload to share them for those who want what I run.
Click to expand...
Click to collapse
Sounds great, although most of it are books with seven seals for me
What about nfs support? And its definitely for 4.4.2 based ROMs?
Thx again,
Nix

Yes to both. It has NFS and CIFS support.

And v.1.6 is the one you'd suggest?

Nixblicker said:
And v.1.6 is the one you'd suggest?
Click to expand...
Click to collapse
Yes.

Snuzzo said:
Yes.
Click to expand...
Click to collapse
One more question, please - do I have to activate or load those modules manually or will they be loaded at bootup by default?
Where may I find them to insmod/modprobe them manually, if not?
Thanks for the help once more,
Cheerio,
Nix

They will load by default.

[Kernel] WR2 [3.4.107] [KK] Wiko Rainbow / Micromax C2C A120 [S5501]

Custom kernel for Wiko Rainbow / Micromax C2C A120
(All S5501 clones)
Now both base versions (Wiko/Micromax)
Please read entire post
Code:
[COLOR="Red"][SIZE="4"][B]I or xda is not responsible for any kind of damage to your device. Please read entire post and use it at your own risk![/B][/SIZE][/COLOR]
This project was initiated by @SiddheshK15. Thanks mate.
I just decided to make my own version of the kernel even more customized.
Click to expand...
Click to collapse
Instructions:
Download your base version Micromax or Wiko
Make sure you downloading correct version,
put kernel zip into sd and install zip from recovery
Enjoy the kernel !!
Click to expand...
Click to collapse
Important!!
This kernel (wiko version) is tested on wiko base only
This kernel (mmx version) is tested on mmx base only
If you want to include this in your custom rom take Wiko/Micromax stock rom was base rom and port the desired rom. Abviously with credits for me. including link to the thread.
Click to expand...
Click to collapse
Changelog:
Added by me
WR2-V1.1
Update to 3.4.107
Sitch to HOTPLUG as default governor
Re-Enable some lcm drivers (This can help black screen bug)
Toolchain: Update to Linaro GCC 4.9.3-2015.03
Ramdisk: Re-Enable some services
ExFAT: Disable, need be supported on ROMs
HID: Remove keyboard/mouse support
Revert: LUNs to default
Add bootloader lock/unlock feature
WR2-V1.02
Reverted: mmc:disable crc for better performance <- for data safety- Thanks to @superdragon
WR2-V1.01
Fixed row scheduler + set as default
WR2-V1.0
New kernel WR2 GPL started from 0
Update to 3.4.106
Now MMX A120 variant (Check download version) Thanks to @mr-illusionist for testing
Added same features as WR-Kernel V2.3
F2FS Ready ( Need testing )
update script to detect if model is RAINBOW
Disabled frandom
New interactive build script + fixed
Update Dynamic Fsync to v1.5 by @faux123
VFP optimization tweaks
Build flags by @superdragon
Kill more log spam
OLD VERSION
V2.3
Update script to add init.d to ROM
Update script to detect if model is RAINBOW (If you are ROM porter pls pm)
Zram with kitkat battery fix
Now only ZRAM version (To enable need init.d script)
CFS Responsiveness Tweeks
VM MAX/VM MIN Tweaks
Disable PERF Control
Dynamic Management Of Dirty Page Writebacks MTK fixes
Kill TRACEPOINTS,PROFILING,PERF_EVENTS,STACKTRACE CRAP
FRANDOM Update
FRANDOM Enable now
ExFAT Update
Enable ExFAT DISCARD
Remove cpu-stress
Remove MTK_ETM
Enable ASMP
Optimize ARM RWSEM algorithm
Update RWSEM to Linux 3.10
Add ZEN/VR IO Schedulers
Fix CGROUP_BFQIO
Added weak clz/ctz functions
ext4: Add support for FIDTRIM
Added support for kernel mode NEON
Crypto: create generic version of ablk_helper
Moved VFP init to an earlier boot stage
Added toolchain to github
Update script to make flashable zip
V2.2
Upstream Update to Kernel 3.4.106
Dynamic management of dirty page writebacks
HID-Gadget: Testing Fixes
Added proc/config.gz support
Fixed LZ4
add overall stats for all available cores
MALI: GPU Optimization flags + Tweaks
pegasusq: tune for MT6582 devices
Disable more logging
remove xlog_logger from build
Revert LUNs to default
Ramdisk: Now Insecured by default
Ramdisk: Now adb runnable as root
Ramdisk: Now debuggable
V2.1
Update to latest Linaro Toolchain(4.9.3) Cortex-A7 Optimized (neon-vfpv4)
Set ZRAM size -> 20%
Now 2 kernel version: ZRAM & No ZRAM (for better battery life)
Selinux: switch enforcing -> permissive
binder.c: avoid binder crash and remove MTK stuff (For CM testing)
Introducing ThunderQuake Engine: Set vibrator intensity. Thanks to varun.chitre15 for making the driver
Disable more logging
android-keyboard-gadget support
LUN: increase the number of emulated USB devices 1 -> 3
V2
Upstream Update to Kernel 3.4.105
More I/O Scheduler: FIOPS; BFQ; SIO
Set default I/O Scheduler -> SIO
enable multicore scheduler
Patch for CD-ROM USB Emulation
exFAT support
Reduce gpu utilization timeout + fixes
Remove arm tracer support
mm: set readahead 256 kb
Optimize apply_slack()
TCP Tweaks (Improves network ping and output)
enabled ARCH_POWER
NOATIME and NODIRATIME by default
Kill logspam+++
set zram size to 25%
Compiler optimizations
LOAD_FREQ (4*HZ+61) avoids loadavg Moire
Allow SCHED_HRTICK
remove unnecessary atomic operations
Revert: Optimized mtk wifi driver (Battery Drain)
V1
Compiled with latest Linaro Toolchain(4.9.2) Cortex-A7 Optimized (neon-vfpv4)
Added init.d support into source
add patches from NVIDIA to improve power efficiency
ext4: speed up truncate/unlink by not using bforget() unless needed
LZ4 compression from linux kernel 3.19 rc2
Use LZ4 by defult for less boot-up time
Use LZ4 in crypto instead of LZO
mm: page-writeback: increase dirty ratios
reduce vfs cache pressure for better battery life
lib/int_sqrt.c: optimize square root algorithm
cut alarm spam
Add frandom(/dev/frandom) -Fast kernel number generator
CC_OPTIMIZE_MORE enabled
Improve the performance of memcpy and memmove (by kasperhettinga)
block: Allow 0ms deadline latency, increase the read speed
lib/decompressors: fix no limit output buffer length
Fixed linaro alias to "arm-eabi-"
Click to expand...
Click to collapse
Added by:@SiddheshK15
Added Governors
Added I/O scheduler
Default swappiness set to 60->15
Optimized mtk wifi driver (Battery Drain)
Increased check battery interval from 10 to 15s
Disabled Gentle Fair Sleepers for better UI performance
adjust dirty writeback for IO boost
Optimization for more free ram
Enabled aggressive multicore power savings
Disable crc for better performance
Entropy tweaks
Optimized slub
Hard Float optimizations
Undervolting
Optimize XZ compresion
Enhanced HW Composer
Dyanamic fsync by faux123
Don't build ZRAM (Fixed)
Governors added :
SMARTASS2
INTERACTIVEX
PEGASUSQ <-- Default
ZZMOOVE
LULZACTIVEQ
SAKURACTIVE
NIGHTMARE
CONSERVATIVE
I/O scheduler
row
Click to expand...
Click to collapse
Credits:
@ariafan
@varun.chitre15
@faux123
@superdragon
@SiddheshK15
@suribi
Many changes extracted from their jobs.
Downloads:
WR2-Kernel-V1.1-WIKO
WR2-Kernel-V1.1-MMX
WR2-Kernel-V1.02-WIKO-MIUIv6
Please Review My Kernel Here
Bugs report Here
Feature Requests Here
Kernel Version: 3.4.107
ROM Firmware Required (WIKO): ALPS.KK1.MP1.V2.10 / Wiko Rainbow Vxx
ROM Firmware Required (MMX) : S5501BP_MP_MMX_IN_10 / MMX KK FOTA
XDA:DevDB Information
WR2-Kernel, Kernel for all devices (see above for details)
Contributors
moonrotation
Source Code: https://github.com/Al3XKOoL/WR2-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1.1
Stable Release Date: 2015-05-22
Current Beta Version: none
Created 2015-01-15
Last Updated 2015-06-02

Great. Keep up the great work and serve the community

Just tried your kernel. Its good.
However i would like to see the changelog. Update it soon buddy. And good work [emoji106]

Thanks guis!! Now im testing upstream merge to kernel 3.4.69
Soon more updates

Kernel 3.4.105 - Beta Stage
I added link with Beta kernel 3.4.105 and more I/O Scheduler:
FIOPS
BFQ
SIO
Enjoy!!

Hi,
antutu says ca. 20400 , befor 20200. The device has a quick response, great ...
Looking forward.. Thx
Gesendet von meinem RAINBOW mit Tapatalk 2

Hi,
Thank you for this impresive kernel!
Two requests:
1) Can you include exFAT support for SD cards?
2) Can include this patch for CD-ROM USB Emulation? http://forum.xda-developers.com/showthread.php?t=2196707
Please, continue supporting custom kernels for Wiko

manos78 said:
Hi,
Thank you for this impresive kernel!
Two requests:
1) Can you include exFAT support for SD cards?
2) Can include this patch for CD-ROM USB Emulation? http://forum.xda-developers.com/showthread.php?t=2196707
Please, continue supporting custom kernels for Wiko
Click to expand...
Click to collapse
Thanks !! :good:
Please try exFAT on this test version. Waiting for report :fingers-crossed:

Hi,
I'll try the exFAT support when I reformat my current SDCard. However I can confirm that this beta kernel with exFAT support works and "cat /proc/filesystems" returns exfat.
Now, another suggestion: The ZRAM support in the Mediatek kernels is hardcoded in size. If you review the file "/kernel/drivers/staging/zram/zram_sysfs.c" you can note the comment "/* Fix disksize */". In the initialization is used the constant "default_disksize_perc_ram" that is fixed to 50% of RAM in the file "zram_drv.h". I suggest to change the default value to 25 (orignal value from Google developers). I can't understand why Mediatek has hardcoded this value. This creates the ZRAM totally useless!
Please, can you change this value and recompile the kernel?
Thank you!

manos78 said:
Hi,
I'll try the exFAT support when I reformat my current SDCard. However I can confirm that this beta kernel with exFAT support works and "cat /proc/filesystems" returns exfat.
Now, another suggestion: The ZRAM support in the Mediatek kernels is hardcoded in size. If you review the file "/kernel/drivers/staging/zram/zram_sysfs.c" you can note the comment "/* Fix disksize */". In the initialization is used the constant "default_disksize_perc_ram" that is fixed to 50% of RAM in the file "zram_drv.h". I suggest to change the default value to 25 (orignal value from Google developers). I can't understand why Mediatek has hardcoded this value. This creates the ZRAM totally useless!
Please, can you change this value and recompile the kernel?
Thank you!
Click to expand...
Click to collapse
Thanks for test!
Google maintains the same config. You can see here:
kernel/mediatek/+/android-4.4.4_r4/drivers/staging/zram/zram_drv.h
Also Siddhesh.K15 disable zram (battery drain). But I can make a test version.

Hi,
This repository has the MEDIATEK sources, from Mediatek, not Google or Wiko. So it's this company who has included this hardcoded size of ZRAM. My problem is that with 50% of 1GB RAM the ZRAM size is 512MB compressed (with 3:1 it's around 200MB of RAM). This is a lot of memory. I suggest to change this value to 25% of physical RAM, not 50% as now. It's only one line of code! If the user don't use ZRAM (disabled by default), nothing changes, but when s/he enables ZRAM, the new size will be more interesting. I feel Mediatek fixed the value thinking on devices with 512MB of RAM, not 1GB. Also, I'm sure that all devices with Android 4.4 and Mediatek CPUs have this "bug"!
I hope, someone in the future eliminates this restriction.
Regards!

manos78 said:
Hi,
This repository has the MEDIATEK sources, from Mediatek, not Google or Wiko. So it's this company who has included this hardcoded size of ZRAM. My problem is that with 50% of 1GB RAM the ZRAM size is 512MB compressed (with 3:1 it's around 200MB of RAM). This is a lot of memory. I suggest to change this value to 25% of physical RAM, not 50% as now. It's only one line of code! If the user don't use ZRAM (disabled by default), nothing changes, but when s/he enables ZRAM, the new size will be more interesting. I feel Mediatek fixed the value thinking on devices with 512MB of RAM, not 1GB. Also, I'm sure that all devices with Android 4.4 and Mediatek CPUs have this "bug"!
I hope, someone in the future eliminates this restriction.
Regards!
Click to expand...
Click to collapse
Changes have been established. Soon I send a version with zram enabled for you. Thank You.:good:

Wr-v2 final
V2 FINAL download link added​

moonrotation said:
V2 FINAL download link added​
Click to expand...
Click to collapse
going to test it soon :good: :fingers-crossed:

Hi,
Testing version WR-V2. First feeling: awesome! Very good! Thank you!
ZRAM at 25% it's great!
For DriveDroid patch: I can't select "Function Swtich in Android kernel". Are you sure that this version includes the patch and has cdrom support?
Thank you man!

manos78 said:
Hi,
Testing version WR-V2. First feeling: awesome! Very good! Thank you!
ZRAM at 25% it's great!
For DriveDroid patch: I can't select "Function Swtich in Android kernel". Are you sure that this version includes the patch and has cdrom support?
Thank you man!
Click to expand...
Click to collapse
Patch here:
https://github.com/Al3XKOoL/tinno82_S5501/commit/08765643d7ccab50e6d9f532bada4b7d7b372e9a
I test it soon.

moonrotation said:
Patch here:
https://github.com/Al3XKOoL/tinno82_S5501/commit/08765643d7ccab50e6d9f532bada4b7d7b372e9a
I test it soon.
Click to expand...
Click to collapse
YES, it's works! When I select an ISO or IMG in DriveDroid, now it's possible to select USB ro, USB rw and CDROM.
I continue testing ZRAM with different values.
Thank you!

manos78 said:
YES, it's works! When I select an ISO or IMG in DriveDroid, now it's possible to select USB ro, USB rw and CDROM.
I continue testing ZRAM with different values.
Thank you!
Click to expand...
Click to collapse
The kernel does not support zram now. Soon I will send a compiled version with zram support.
And if you are so kind you can test the battery consumption.
Thanks for testing.

manos78 said:
I continue testing ZRAM with different values....
Click to expand...
Click to collapse
Here zram version.

Hello everyone ... first of all I want to thank the author ... its fantastic ...
how can I disable the power saving multicore ??

[KERNEL] StellAR Kernel for MI3/MI4 [UBER 6.0][Lollipop/MIUI/Ivan AOSP]

Code:
/*
* [URL="http://www.digit.in/mobile-phones/bought-a-xiaomi-phone-root-it-doesnt-void-the-warranty-25001.html"]Your warranty is not void. -Xiaomi[/URL]
*
* But still,
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
:highfive:
Hello people, I present you a custom kernel for our beloved device from MI3 :victory:
Should Work on most roms out there
Currently Miui is not supported for a while
BATTERY LIFE:-
See this post
FEATURES:-
-Compiled with latest Uber Toolchain 6.0
-Intelliplug
-KEXEC
-DT2W
-Add LCD KCAL control driver (see extras)
-Governers :- smartassH3, elementalx, abyssplugv2, wheatley, lionheart
-Scheduler:- bfq, sio, fiops, zen, vr & defaults
-Linux version 3.4.110
-MemUtils
-Voltage Control
-Faux Sound
-PM Powersuspend
-exfat support, CIFS fix
-Use phone as keyboard/mouse
-TCP Congestion:- westwood, reno, bic, cubis, highspeed, hybla, etc...
For rest see my commits
Installation:-
Put the zip file in the memory
Reboot to recovery
Wipe cache and dalvik cache
Reboot system
To recover back to stock, just flash back the original ROM, Recovery backup wont work as the system/lib/modules have been changed
BUGS:- You tell, i fix . Some features are untested because i dont use them so do report if anything is not working
BETA:- the beta version can be found in the downloads folder, changelog will be in the github commits
Downloads:- Version:- ShInAgAmI (Death God) V5.2
I Kindly request to not mirror my links, if they dont work i will try to upload to other sites
Google Drive
Updates:-
Code:
[B]V5.2 ShInAgAmI (Death God)[/B][HIDE]
[B]Tonnes of fixes and ports[/B] [U](see commits)[/U][/HIDE]
[B]V4 Khukhakh[/B][HIDE]
[LIST=1]
[*]ReBase from stuxnet kernel
[*]pm powersuspend ; exfat support ; use phone as keyboard/mouse
[*]GCC 6.0, etc, etc...
[/LIST][/HIDE]
[B]V3 Sora Shiro[/B][HIDE]
[LIST=1]
[*]Clean and restart from the very beginning
[*]Used Temasek branch from kernel-hut to build, so should increase the compability
[*]GCC 5.1
[/LIST][/HIDE]
[B]V2-r9 KiSeKi[/B][HIDE]
[LIST=1]
[*]Removed smartassV2, Added wheatley
[*]Added fRandom
[*]Re-Commited memutils
[/LIST][/HIDE]
[B]V2 KiSeKi[/B][HIDE]
[LIST=1]
[*]Added New Schhedulers zen, sio, fiops, vr
[*]Added LCD KCAL driver
[/LIST][/HIDE]
[B]V1-r5 AkAtSuKi[/B][HIDE]
[LIST=1]
[*]Reduced wlan.ko size
[*]enabled faux sound and fast charge
[/LIST][/HIDE]
Future features planned:-
pcm or smartwax governor
Some additional touch modifications
Better OC (not in current versions)
Gpu oc from tarun
remove compile warnings and kmesg errors
aaand improve get a better pc (within 2 months)
Credits:- (All hail to these gods!!)
@faux123 - For so many Damn things!!
@DooMLoRD - For his msm8974ab tree
@Bitti09 & @audahadi - The kernel fixes & tweaks and their device tree with fixes
@Gnome - Voltage Control, BFQv7r7, stuxnet kernel
@savoca & @neobuddy89 - LCD KCAL driver, and a lot of stuff (currently for d2w code imports too)
and all the other devs for their commits, and xiaomi for the opensource kernel promise (unbuildable source though)
@vasishath for miui support, dt2w and anykernel2 fixes
@Tarun93 for helping me with oc and other stuff
Extras:-
To use most of the features use Kernel Adiutor (Best app out there)
To use only the LCD KCAL control use this Color Control App by savoca
Also Trickster MOD works fine
Latest updated Kernel Source:- https://github.com/deeplyarnab/android_kernel_xiaomi_cancro/
​
XDA:DevDB Information
StellAR Kernel for MI3/MI4, Kernel for the Xiaomi Mi 3
Contributors
arnabbiswasalsodeep, Gnome, vasishath
Source Code: https://github.com/deeplyarnab/android_kernel_xiaomi_cancro
Kernel Special Features: LCD KCAL, ADRENO IDLER, DT2W, KEXEC
Version Information
Status: Beta
Current Stable Version: 6.5#
Stable Release Date: 2016-04-22
Current Beta Version: april_last
Beta Release Date: 2016-05-05
Created 2015-06-01
Last Updated 2016-05-06

ExtrAAAss
To use most of the features use Kernel Adiutor (Best app out there)
To use only the LCD KCAL control use this Color Control App by savoca
Also Trickster MOD works fine
Kernel Source:- https://github.com/arnabbiswasalsodeep/android_kernel_xiaomi_cancro/
An excellent guide about the Governors, hotplugs, etc:-
Android Cpu governors explained

wooow..so many kernel today ! Great work sir, hope for many new update ..It works on all roms or ? thanks :good::good:

Good job!
In a while I'll try it

Good job.
Download and testing now!

i have only tried this on cm12.1
try on others and report if you have any problem
also report any bugs you face (a pm too will be nice since it will be nice as)

arnabbiswasalsodeep said:
i have only tried this on cm12.1
try on others and report if you have any problem
also report any bugs you face (a pm too will be nice since it will be nice as)
Click to expand...
Click to collapse
confirm that works CM12.1.. with wich apps can we adjust all of this settings ? syanpse works ?

CM12.1 by Bitti09
Confirmed. Kernel boots and works on cm12.1 by Bitti09!

Sagar.Shwrmni said:
Kernel Adiutor Link
Click to expand...
Click to collapse
yeah, using it right now..but synapse have so much option

I used kernel adiutor, and trickster mod
Faux sound was ported from @alexret kernel so still now testes it (trusting him)

@arnabbiswasalsodeep AH, finally the cat is out of the bag! :laugh:
Sorry that I couldn't test it for you cuz my phone wasn't here. :crying:
Sagar.Shwrmni said:
Kernel Adiutor Link
Click to expand...
Click to collapse
You just might be the first person I've seen who spelt it correctly.
(See the first of the FAQs in the app )

Will it work on LP 5.0.2. I'm using BP 2.3 and was wondering if it would work...

no sound control in synapse :-/

morpheus620 said:
no sound control in synapse :-/
Click to expand...
Click to collapse
I havent tested synapse yet
And i ported faux audio from alexret's kernel, cant test it cuz i havent bought the app
Also fast charge is disabled for now
Will enable it soon (maybe in 2 days)

arnabbiswasalsodeep said:
I havent tested synapse yet
And i ported faux audio from alexret's kernel, cant test it cuz i havent bought the app
Also fast charge is disabled for now
Will enable it soon (maybe in 2 days)
Click to expand...
Click to collapse
synapse don't work for now..because no UCI support

synapse worked. flash the ukm script.
and smartassv2 runs at the highest frequency. it can be used no other.

morpheus620 said:
synapse worked. flash the ukm script.
and smartassv2 runs at the highest frequency. it can be used no other.
Click to expand...
Click to collapse
but with ukm script and synapse ,network signal disappear

The problem is not with me.

Wifi not working in Mokee latest nightly....!!!
Any solution???

kevalthakkar said:
Wifi not working in Mokee latest nightly....!!!
Any solution???
Click to expand...
Click to collapse
seems to be working fine for me....is your wifi not turning on?