[fxz] 4.4.2 183.46.15 - RAZR HD General

WARNING: You REALLY need to UNDERSTAND and read EVERYTHING or you MAY brick your phone!
IF YOU HAVE NOT UNLOCKED, THIS BUILD WILL PERMANENTLY PREVENT YOU FROM DOING SO. STOP NOW and GO UNLOCK!
Purpose of this thread:
To get you, the locked or unlocked RAZR HD xt926 owner, from any version to 4.4.2 (KDA20.62-15.1).
Things you will need:
FXZ KDA20.62-15.1 thanks @stras1234 as always!
Instructions:
Use the RSD Flasher with KEEP DATA to flash this on your phone with RSD.
OR
Use the House of Moto with KEEP DATA to flash this to your phone with fastboot.
OR
Use RSD Lite to flash it, but, you will lose data unless you modify the XML file manually.
This will get you a clean OTA install. You will lose root.

Thanks, I was looking for the fxz.

Guess I am a n00b how do you flash this?

jparasita said:
Guess I am a n00b how do you flash this?
Click to expand...
Click to collapse
click on rsd flasher and read

I flashed the fxz, but it now says my Android version is 4.4, not 4.4.2. Is there a reason for the downgrade The System version is now '19.5.3.obake_verizon.Verizon.ens.US'. Thanks.

Um what? That system version is for a Droid maxx. This FXZ is for the razr hd. There is no possible way you flashed this FXZ on a razr hd and ended up with what you're saying.
Sent from my SM-P600 using Tapatalk

SamuriHL said:
Um what? That system version is for a Droid maxx. This FXZ is for the razr hd. There is no possible way you flashed this FXZ on a razr hd and ended up with what you're saying.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Take a look at it yourself.

That didn't come from this FXZ. What, EXACTLY, did you flash?

I flashed 'VZW_XT926_4.4.2-KDA20.62-15.1_1FF.xml' using your utility with the KEEP DATA option.
I don't know what to say. I for sure didn't hunt around for a Maxx fxz and I certainly don't have a copy of one sitting around on my PC. I downloaded the .zip you posted above and used your utility to flash it. Afterwards I flashed dhacker's CWM (v6.0.4.9) and SU (UPDATE-SuperSU-v2.02.zip). That is it. I did nothing else.

that screen shot made me lol
other than the obvious, correct phone, wrong version, the build date is funny too.
how the f did that even boot lol
---------- Post added at 04:52 PM ---------- Previous post was at 04:43 PM ----------
im working on flashing this now to verify the file and will report back soon.

I've already had someone verify the FXZ in my download link and send me a screen shot of it. It doesn't look like yours so I really don't know what to tell you. There is no way possible that the FXZ I posted has anything that shows obake in it as that's a COMPLETELY different device. This is the xt926 RAZR HD and RAZR HD MAXX. It's not the Droid Maxx which is what the screen shot you posted shows. Post a copy of your swdl.txt file from the RSD flash. You'll find it in your RSD install folder.

i never doubted your file, i just want this on my device
a totally whacked about page, that is lol
boot with the wrong firmware? yea i need that too lol
---------- Post added at 05:26 PM ---------- Previous post was at 05:15 PM ----------
well dam, mine displays the proper info
btw, ffs, optimizing 200 apps on a clean phone, really...

bweN diorD said:
i never doubted your file, i just want this on my device
a totally whacked about page, that is lol
boot with the wrong firmware? yea i need that too lol
---------- Post added at 05:26 PM ---------- Previous post was at 05:15 PM ----------
well dam, mine displays the proper info
btw, ffs, optimizing 200 apps on a clean phone, really...
Click to expand...
Click to collapse
LMAO! Switch to ART.....that'll make you appreciate how fast Dalvik is at optimizing. LOL

just noticed @Skrilax_CZ hasnt put this on sbf droid devs yet
---------- Post added at 06:18 PM ---------- Previous post was at 06:15 PM ----------
SamuriHL said:
LMAO! Switch to ART.....that'll make you appreciate how fast Dalvik is at optimizing. LOL
Click to expand...
Click to collapse
yea i know lol
i think ill just switch to my g2 or g3 and remember what used to be great, now seems annoyingly slow

That's cause he doesn't have it yet. His is the "official" version that will contain the erase userdata line.

SamuriHL said:
That's cause he doesn't have it yet. His is the "official" version that will contain the erase userdata line.
Click to expand...
Click to collapse
ahh, i noticed that, but thought nothing of it.

bweN diorD said:
ahh, i noticed that, but thought nothing of it.
Click to expand...
Click to collapse
Stras has been getting them way early so I've been posting them as soon as soak or ota goes out.

SamuriHL said:
I've already had someone verify the FXZ in my download link and send me a screen shot of it. It doesn't look like yours so I really don't know what to tell you. There is no way possible that the FXZ I posted has anything that shows obake in it as that's a COMPLETELY different device. This is the xt926 RAZR HD and RAZR HD MAXX. It's not the Droid Maxx which is what the screen shot you posted shows. Post a copy of your swdl.txt file from the RSD flash. You'll find it in your RSD install folder.
Click to expand...
Click to collapse
My screenshot shows 'RAZR MAXX HD'.

That's nice. Doesn't give me the information I asked for. You keep claiming that flashing the FXZ in the OP is what did this to your phone, and I keep telling you that's not possible and has been confirmed for me by several people at this point. Telling me what's in the screen shot doesn't really solve the problem. I can make that screen shot say anything I want. Doesn't mean the information is accurate.

SamuriHL said:
That's nice. Doesn't give me the information I asked for. You keep claiming that flashing the FXZ in the OP is what did this to your phone, and I keep telling you that's not possible and has been confirmed for me by several people at this point. Telling me what's in the screen shot doesn't really solve the problem. I can make that screen shot say anything I want. Doesn't mean the information is accurate.
Click to expand...
Click to collapse
Chillax. I am not by my PC. I will post it once I get home.

Related

My First Droid Razr M Experience

I got a Droid Razr M for an upgrade, Worked great so i rooted it, Still worked great all that day, then i went to sleep and when i woke and the WiFi would not work!
The toggle switch turned a darker gray, When i tap it it turns on then in a split second turns back off.
I have done a Factory Data Reset and then i did a hard reset and then i wiped the hole thing out and re flashed it to its original state. Still would not work!
So as a last resort contact Motorola for support and they tell me that i had rooted my device and there is nothing they can do. I didn't say anything about rooting it so they must be logging all users data. (Invasion of Privacy?)
So i am back here again, Not being able to use WiFi, On a 2GB/M plan. f%$king peace of $#!+.
Nothing else is bad! Its just the wifi!?
SaturnsVoid said:
I got a Droid Razr M for an upgrade, Worked great so i rooted it, Still worked great all that day, then i went to sleep and when i woke and the WiFi would not work!
The toggle switch turned a darker gray, When i tap it it turns on then in a split second turns back off.
I have done a Factory Data Reset and then i did a hard reset and then i wiped the hole thing out and re flashed it to its original state. Still would not work!
So as a last resort contact Motorola for support and they tell me that i had rooted my device and there is nothing they can do. I didn't say anything about rooting it so they must be logging all users data. (Invasion of Privacy?)
So i am back here again, Not being able to use WiFi, On a 2GB/M plan. f%$king peace of $#!+.
Nothing else is bad! Its just the wifi!?
Click to expand...
Click to collapse
It is probably your fault. A broken radio is your burden why do you think they do not want you rooting? The radio partition can get borked very easily. You need to renew it.
Do my restore. See my signature
aviwdoowks said:
It is probably your fault. A broken radio is your burden why do you think they do not want you rooting? The radio partition can get borked very easily. You need to renew it.
Do my restore. See my signature
Click to expand...
Click to collapse
your hole thread is too big for me, Could you PM me the steps i need to take? I can't figure out you what i need to do in the thread
SaturnsVoid said:
your hole thread is too big for me, Could you PM me the steps i need to take? I can't figure out you what i need to do in the thread
Click to expand...
Click to collapse
Are you unlocked? (Bootloader?)
the auzess
aviwdoowks said:
Are you unlocked? (Bootloader?)
Click to expand...
Click to collapse
Yes, Its Unlocked. I need to get it fixed.
SaturnsVoid said:
Yes, Its Unlocked. I need to get it fixed.
Click to expand...
Click to collapse
There is a lot of verbal running on there but few steps. Read the rsd tutorial & get rsd to see the phone while you have the phone in bootloader - fastboot. Then stop & check in here again....
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Also DL the full version xml.
aviwdoowks said:
There is a lot of verbal running on there but few steps. Read the rsd tutorial & get rsd to see the phone while you have the phone in bootloader - fastboot. Then stop & check in here again....
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Also DL the full version xml.
Click to expand...
Click to collapse
Well i have the phone in Fastboot, I don't know where to get the full version XML file
SaturnsVoid said:
Yes, Its Unlocked. I need to get it fixed.
Click to expand...
Click to collapse
SaturnsVoid said:
Well i have the phone in Fastboot, I don't know where to get the full version XML file
Click to expand...
Click to collapse
You must read my OP!
The link is the last thing there.
aviwdoowks said:
You must read my OP!
The link is the last thing there.
Click to expand...
Click to collapse
Well i downloaded the last link (VZW_XT907-4.1.2-9.8.1Q-66_1FF.XML.ZIP) and had RSD try and Flash it while it was in Fastboot mode... It failed saying "6/19 flash tz "tz.mbn" -> Phone returned FAIL."
Did i do something wrong?
SaturnsVoid said:
Well i downloaded the last link (VZW_XT907-4.1.2-9.8.1Q-66_1FF.XML.ZIP) and had RSD try and Flash it while it was in Fastboot mode... It failed saying "6/19 flash tz "tz.mbn" -> Phone returned FAIL."
Did i do something wrong?
Click to expand...
Click to collapse
That is the err you would get if your boot was locked.
Edit FOLLOW the OP!!
You downloaded THE WRONG XML!!!#$#&
---------- Post added at 07:14 PM ---------- Previous post was at 07:03 PM ----------
You need VRZ_XT907_9.8.1Q-78-1_1FF.xml.zip
& then paste the mod into it!!!
OR
THE FULL ver.
aviwdoowks said:
That is the err you would get if your boot was locked.
Edit FOLLOW the OP!!
You downloaded THE WRONG XML!!!#$#&
---------- Post added at 07:14 PM ---------- Previous post was at 07:03 PM ----------
You need VRZ_XT907_9.8.1Q-78-1_1FF.xml.zip
& then paste the mod into it!!!
OR
THE FULL ver.
Click to expand...
Click to collapse
Well i am download that, But my phone is LOCKED... I can get root still but i dont know about unlocking... You know anything?
SaturnsVoid said:
Well i am download that, But my phone is LOCKED... I can get root still but i dont know about unlocking... You know anything?
Click to expand...
Click to collapse
Gen. Forum: root method work around.... look for my op.
---------- Post added at 07:27 PM ---------- Previous post was at 07:23 PM ----------
I think you can follow the prev rzr method but it is a method similar to mine but for locked BL @ 600 + mb . Not just the new motochopper.
aviwdoowks said:
Gen. Forum: root method work around.... look for my op.
---------- Post added at 07:27 PM ---------- Previous post was at 07:23 PM ----------
I think you can follow the prev rzr method but it is a method similar to mine but for locked BL @ 600 + mb . Not just the new motochopper.
Click to expand...
Click to collapse
Well i did that all, Still does not work... I don't understand!?
SaturnsVoid said:
Well i did that all, Still does not work... I don't understand!?
Click to expand...
Click to collapse
You did the rzr forum method? Get help there, I do not support locked phones.
---------- Post added at 09:08 PM ---------- Previous post was at 08:32 PM ----------
Basically can you just do a rsd restore then use the new motochopper? Can someone chime in to confirm?
For a locked phone?
I just realized you never went to my restore thread. That explains your confusion. It's link is in the middle of my goodies page. I put it in my signature now.
http://forum.xda-developers.com/showthread.php?t=2391641
Ok, SaturnsVoid... so, first, sorry to hear about the problem. Motorola/VZ is giving you BS... rooting won't break your WiFi unless you did something or installed something that would...
What's your current system version?
Have you taken any OTAs since you had it? If not, you may still be able to unlock.
Also, may want to try using WiFi Connection Fixer on the Play Store (requires root...)
If those don't work, try PMing me... I can help you work it out...

Please help! Stuck in fastboot!

Hey guys so i fallowed the root method "Motofail" from a thread that said it unlocked the bootloader... well it didnt so when i used safestrap to flash cm11 it rebooted into fastboot and i have no unlocked bootloader... is it possible to get out of this? even if reverting to stock? please Get back to me fast if you can since this is not my phone and would like to fix it rather quickly P.S i found a new method for unlocking my bootloader called "Motocolapse" so if my phone is operationable i can do it now... its just a matter of i tried flashing cm11 and when i did a system reboot it only goes to fastboot please respond any way to fix! THANKS IN ADVANCE ALOT!!! much love
iPwnAndroid said:
Hey guys so i fallowed the root method "Motofail" from a thread that said it unlocked the bootloader... well it didnt so when i used safestrap to flash cm11 it rebooted into fastboot and i have no unlocked bootloader... is it possible to get out of this? even if reverting to stock? please Get back to me fast if you can since this is not my phone and would like to fix it rather quickly P.S i found a new method for unlocking my bootloader called "Motocolapse" so if my phone is operationable i can do it now... its just a matter of i tried flashing cm11 and when i did a system reboot it only goes to fastboot please respond any way to fix! THANKS IN ADVANCE ALOT!!! much love
Click to expand...
Click to collapse
what did it say for your sw build or any numbers in the about phone screen?
The last link below I wrote just for YOU.
aviwdoowks said:
what did it say for your sw build or any numbers in the about phone screen?
The last link below I wrote just for YOU.
Click to expand...
Click to collapse
i cant really tell since my phone is stuck in fastboot :/
You could Go to that link & try matts util to do a full restore.
But wait.
You were on SS cause your boot is locked?
How old is the phone?
---------- Post added at 07:11 PM ---------- Previous post was at 07:05 PM ----------
Post what you see in the screen.
aviwdoowks said:
You could Go to that link & try matts util to do a full restore.
But wait.
You were on SS cause your boot is locked?
How old is the phone?
---------- Post added at 07:11 PM ---------- Previous post was at 07:05 PM ----------
Post what you see in the screen.
Click to expand...
Click to collapse
AP Fastboot Flash Mode (S)
10.9B(*) (sha-le9f557, 2013-05-24 14:49:34)
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Failed to hab check for recovery: 0x56
Fastboot Reason: Boot Failure
iPwnAndroid said:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-le9f557, 2013-05-24 14:49:34)
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Failed to hab check for recovery: 0x56
Fastboot Reason: Boot Failure
Click to expand...
Click to collapse
Hab check!!!
Pm cellzealot!
http://forum.xda-developers.com/member.php?u=767282
aviwdoowks said:
Hab check!!!
Pm cellzealot!
http://forum.xda-developers.com/showthread.php?t=2566065
Click to expand...
Click to collapse
Well its changed now since i tried Droid razr m utility 1.20 now it says
No valid PIV block in SP for system
piv validation failed (system)
Fastboot Reason: Boot Failure
usb connected
iPwnAndroid said:
Hey guys so i fallowed the root method "Motofail" from a thread that said it unlocked the bootloader... well it didnt so when i used safestrap to flash cm11 it rebooted into fastboot and i have no unlocked bootloader... is it possible to get out of this? even if reverting to stock? please Get back to me fast if you can since this is not my phone and would like to fix it rather quickly P.S i found a new method for unlocking my bootloader called "Motocolapse" so if my phone is operationable i can do it now... its just a matter of i tried flashing cm11 and when i did a system reboot it only goes to fastboot please respond any way to fix! THANKS IN ADVANCE ALOT!!! much love
Click to expand...
Click to collapse
Well, it looks like Android is pawning you.
Motofail was the root exploit for the 4.1.1 version and it didn't unlock the bootloader. Motopocalypse was the only method to unlock the BL and, according the date you posted from your fastboot screen, you're on the May OTA that blocks the BL unlock. You really need to stop using random tools and start reading before you do something. Also, you can't flash CM11 with SS. Utility 1.20 is the correct utility to use for your system version. Are you sure you're using the 1.20 Utility? That's the only reason I can see that you're getting the fail. Did you try to flash the newer OTA at any point?
RikRong said:
Well, it looks like Android is pawning you.
Motofail was the root exploit for the 4.1.1 version and it didn't unlock the bootloader. Motopocalypse was the only method to unlock the BL and, according the date you posted from your fastboot screen, you're on the May OTA that blocks the BL unlock. You really need to stop using random tools and start reading before you do something. Also, you can't flash CM11 with SS. Utility 1.20 is the correct utility to use for your system version. Are you sure you're using the 1.20 Utility? That's the only reason I can see that you're getting the fail. Did you try to flash the newer OTA at any point?
Click to expand...
Click to collapse
hahaha... very funny little entrance there look im sorry i make mistakes as a human being all i can do is try to fix them okay? yes i used the 1.20 utility and ive succesfully flashed cm11 using SS on the droid razr so i didnt see why it wouldnt work on the M
iPwnAndroid said:
hahaha... very funny little entrance there look im sorry i make mistakes as a human being all i can do is try to fix them okay? yes i used the 1.20 utility and ive succesfully flashed cm11 using SS on the droid razr so i didnt see why it wouldnt work on the M
Click to expand...
Click to collapse
Don't take it personally, it's just a little bit of sarcasm. I know it can get lost through the internet.
With that being said. I reread thread and saw that date again. Utility 1.20 was for the OTA prior to that, so that's why you're probably running into issues. Sorry, you can slap me because I told you wrong in the post after yours where you talked about using 1.20. Matt never updated a utility to reflect the newest OTA. As for CM11, it specifically states on the CM website that you need an unlocked bootloader:
http://wiki.cyanogenmod.org/w/Xt907_Info
CM was designed for SS on the Razr because the Razr never had an unlockable BL:
http://wiki.cyanogenmod.org/w/Spyder_Info
iPwnAndroid said:
Well its changed now since i tried Droid razr m utility 1.20 now it says
No valid PIV block in SP for system
piv validation failed (system)
Fastboot Reason: Boot Failure
usb connected
Click to expand...
Click to collapse
I think messed up something bad!
Pm cellzealot!
I had his link wrong. This is correct.
http://forum.xda-developers.com/member.php?u=767282
---------- Post added at 09:26 PM ---------- Previous post was at 09:24 PM ----------
Just pm him with the link to your thread. & use the crying smily.
aviwdoowks said:
I think messed up something bad!
Pm cellzealot!
I had his link wrong. This is correct.
http://forum.xda-developers.com/member.php?u=767282
---------- Post added at 09:26 PM ---------- Previous post was at 09:24 PM ----------
Just pm him with the link to your thread. & use the crying smily.
Click to expand...
Click to collapse
Problem was using utility 1.20. It was designed for the OTA in April. His FB screen says he took the OTA in May. Do you have the FXZ for .78 or .1 somewhere? I'm not on my home computer, otherwise I would look. I think he needs to RSD to save this.
iPwnAndroid said:
hahaha... very funny little entrance there look im sorry i make mistakes as a human being all i can do is try to fix them okay? yes i used the 1.20 utility and ive succesfully flashed cm11 using SS on the droid razr so i didnt see why it wouldnt work on the M
Click to expand...
Click to collapse
RikRong said:
Problem was using utility 1.20. It was designed for the OTA in April. His FB screen says he took the OTA in May. Do you have the FXZ for .78 or .1 somewhere? I'm not on my home computer, otherwise I would look. I think he needs to RSD to save this.
Click to expand...
Click to collapse
The ...78 is let me see mega is slow....
---------- Post added at 10:18 PM ---------- Previous post was at 09:55 PM ----------
iPwnAndroid said:
hahaha... very funny little entrance there look im sorry i make mistakes as a human being all i can do is try to fix them okay? yes i used the 1.20 utility and ive succesfully flashed cm11 using SS on the droid razr so i didnt see why it wouldnt work on the M
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=48295502&postcount=47
Join this user in his drama! Right up your alley! Same Same.
---------- Post added at 10:23 PM ---------- Previous post was at 10:18 PM ----------
That is if your phone is not hosed.
---------- Post added at 10:26 PM ---------- Previous post was at 10:23 PM ----------
Un modded Xml will be up soon here on your thread.
My restore link: http://forum.xda-developers.com/showthread.php?t=2391641
Read for now while Mega up loads.
---------- Post added at 10:49 PM ---------- Previous post was at 10:26 PM ----------
On the way....
iPwnAndroid said:
.^.
Click to expand...
Click to collapse
VRZ_XT907_9.8.1Q-78-1_1FF.orig.xml.zip
Posted it in the General forum. Good Luck!
aviwdoowks said:
VRZ_XT907_9.8.1Q-78-1_1FF.orig.xml.zip
Posted it in the General forum. Good Luck!
Click to expand...
Click to collapse
Hey man i see you bricked your phone no worries i'll help you out i've done it myself.
so you're going to need
motorola drivers
RSD lite lastest version
4.1.2 xml file for razr m ( just google search it)
and patience
ok so
I guess you know how to put your razr m in fastboot mood if not you power your device off and hold the power , vol - and sorta click it multple times. until it brings you to the screen. then you should be able to run rsd lite and flash the 4.1.2 xml file would could be found with a single google search. so flashing firmware is pretty easy.. it should be a breeze. after that just leave your phone as it is. motorola will be releasing the 4.4 update swoon hopefully so i would just wait.
hope this was semi helpful
iPwnAndroid said:
Well its changed now since i tried Droid razr m utility 1.20 now it says
No valid PIV block in SP for system
piv validation failed (system)
Fastboot Reason: Boot Failure
usb connected
Click to expand...
Click to collapse
Someone quoted me but for you.

[Q] Locked BL updated to latest OTA

I was using original stock 4.1.1 version + http://forum.xda-developers.com/showthread.php?t=2166542&highlight=98+18+94 to use xt907 on t-mobile.
Yesterday, I used RSD to restore the 4.1.1 version and OTAed to the latest 98.30.1.XT907.Verizon ROM. Then the t-mobile sim does not work any more, and the original method does not work.
Then I tried to downgrade 4.1.1 version using RSD, and failed. Then I'm stuck in the fastboot mode...
My question is:
1. Is there a way that I can get out of fastboot mode? Which rom should I use in RSD to restore?
2. Is there a way that I can downgrade to earlier version?
3. Is there a way that I can still use t-mobile sim card?
Thanks
You might be able to use the droid razr m utility but I'm no expert in it. I've just dabbled around in all of this. Wait for some insight from Rikrong or someone of the sort.
Sent from my XT907 using xda app-developers app
---------- Post added at 09:24 AM ---------- Previous post was at 09:20 AM ----------
That my suggested answer for question one, but I may be wrong so wait for some insight from someone who knows exactly what's wrong.
Sent from my XT907 using xda app-developers app
danielcdh said:
I was using original stock 4.1.1 version + http://forum.xda-developers.com/showthread.php?t=2166542&highlight=98+18+94 to use xt907 on t-mobile.
Yesterday, I used RSD to restore the 4.1.1 version and OTAed to the latest 98.30.1.XT907.Verizon ROM. Then the t-mobile sim does not work any more, and the original method does not work.
Then I tried to downgrade 4.1.1 version using RSD, and failed. Then I'm stuck in the fastboot mode...
My question is:
1. Is there a way that I can get out of fastboot mode? Which rom should I use in RSD to restore?
2. Is there a way that I can downgrade to earlier version?
3. Is there a way that I can still use t-mobile sim card?
Thanks
Click to expand...
Click to collapse
poppers162 said:
You might be able to use the droid razr m utility but I'm no expert in it. I've just dabbled around in all of this. Wait for some insight from Rikrong or someone of the sort.
Sent from my XT907 using xda app-developers app
---------- Post added at 09:24 AM ---------- Previous post was at 09:20 AM ----------
That my suggested answer for question one, but I may be wrong so wait for some insight from someone who knows exactly what's wrong.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Poppers, you're on point. However, there's no Razr M utility for the latest update. You can use House of Moto from DroidRzr or flash the latest OTA with RSD.
Daniel, since you updated to .1, you can't downgrade. Just grab the last FXZ from SBF or use House of Moto to clear the fastboot fail. If your battery is low, you need to make sure it's charged before fastbooting.
Link to House of Moto:
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-20/
Link to FXZ's for restore, use the last one on the list:
http://sbf.droid-developers.org/phone.php?device=8
RikRong said:
Poppers, you're on point. However, there's no Razr M utility for the latest update. You can use House of Moto from DroidRzr or flash the latest OTA with RSD.
Daniel, since you updated to .1, you can't downgrade. Just grab the last FXZ from SBF or use House of Moto to clear the fastboot fail. If your battery is low, you need to make sure it's charged before fastbooting.
Link to House of Moto:
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-20/
Link to FXZ's for restore, use the last one on the list:
http://sbf.droid-developers.org/phone.php?device=8
Click to expand...
Click to collapse
Thanks RikRong! I managed to use house of moto to reset the system to the latest VRZ_XT907_9.8.1Q-94-1. Now the phone works. But I still cannot use t-mobile sim card. And the original method described in http://forum.xda-developers.com/showthread.php?t=2166542&highlight=98+18+94 does not work on the latest ROM.
Any idea if there is a way that I can use t-mobile on it? Or my best bet is to sell it on craigslist?
Thanks,
Dehao
danielcdh said:
Thanks RikRong! I managed to use house of moto to reset the system to the latest VRZ_XT907_9.8.1Q-94-1. Now the phone works. But I still cannot use t-mobile sim card. And the original method described in http://forum.xda-developers.com/showthread.php?t=2166542&highlight=98+18+94 does not work on the latest ROM.
Any idea if there is a way that I can use t-mobile on it? Or my best bet is to sell it on craigslist?
Thanks,
Dehao
Click to expand...
Click to collapse
That method should work, though I don't know much about it. You might want to post in the thread. You should be able to get the phone to work on T-Mobile.
I'm on 98.30.1 and on T-Mobile. I used that tutorial also.
SeNT FRoM My MoToRoLA RaZR M XT907 oN T-MoBiLe

Turbo with WiFi tethering!

I managed to modify a turbo system image file to include tethering on an unlimited data plan. Download it here. Use with Mofo root. This has been confirmed to work for several people, but others are reporting problems. Your mileage may vary.
I AM NOT RESPONSIBLE IF IT BRICKS YOUR PHONE, SETS YOUR HOUSE ON FIRE, EATS YOUR CAT ETC.
Thanks to @aFancyTickler for helping me determine what files to modify.
Ok who is taking the plunge?
jparasita said:
Ok who is taking the plunge?
Click to expand...
Click to collapse
I'm honestly about to because I can't get the original image to flash
jparasita said:
Ok who is taking the plunge?
Click to expand...
Click to collapse
Bake in xposed and I'll plunge.
Im Saint said:
Bake in xposed and I'll plunge.
Click to expand...
Click to collapse
I'm pretty sure the way I did it if you install xposed installer it should read xposed as installed. You will not be able to install any modules due to write protection. Again no guarantees.
I'm going to be busy for the next few hours. If this is broken you'll have to wait a bit. For your information all I've done is modify the build.prop to include provisioning (for wifi tether) and add the gravitybox app to system apps. I also installed what I believe is the correct file for xposed framework to work. Even if it doesn't the phone should still boot. No promises. Good luck to anyone who chooses to install
Ekkoria said:
I managed to modify a turbo system image file to HOPEFULLY include tethering. This image also potentially has gravitybox baked in if I did everything right, but the wifi tether is much more likely to work because I actually know how that's supposed to work. NO GUARANTEES AS TO EITHER. I DO NOT YET HAVE ACCESS TO A ROOTED TURBO. If you want to test this sucker out, go here. Use with Mofo root.
I AM NOT RESPONSIBLE IF IT BRICKS YOUR PHONE, SETS YOUR HOUSE ON FIRE, EATS YOUR CAT ETC.
Thanks to @aFancyTickler for helping me determine what files to modify
Click to expand...
Click to collapse
If this works then you are awesome my friend. So do we use this image preroot instead of the one in the video?
graymonkey44 said:
If this works then you are awesome my friend. So do we use this image preroot instead of the one in the video?
Click to expand...
Click to collapse
Correct.
downloading now I will plunge
Ekkoria said:
Correct.
Click to expand...
Click to collapse
Then I'll be attempting this. Currently downloading as we speak. Quick question, why is this image (3.3 GB), so much larger than the factory image (1.4 GB)?
graymonkey44 said:
Then I'll be attempting this. Currently downloading as we speak. Quick question, why is this image (3.3 GB), so much larger than the factory image (1.4 GB)?
Click to expand...
Click to collapse
Forgot to stick it in a zip file like an idiot in my excitement. Will do later
Flashing now stay tuned!
Ekkoria said:
I managed to modify a turbo system image file to HOPEFULLY include tethering.
Click to expand...
Click to collapse
How can I make a system image file of my OG Moto X? It is rooted and bootloader unlocked.
JulesJam said:
How can I make a system image file of my OG Moto X? It is rooted and bootloader unlocked.
Click to expand...
Click to collapse
If you are rooted and bootloader unlocked then you do not need to make a system image file you can flash or make roms.
jparasita said:
If you are rooted and bootloader unlocked then you do not need to make a system image file you can flash or make roms.
Click to expand...
Click to collapse
I know but I have a developer edition and not everyone has one. I want to make a rooted system image, then relock my bootloader and see if this method will work to provide root for those who do not have developer editions.
Wait guys do not flash this yet!
---------- Post added at 08:44 PM ---------- Previous post was at 08:42 PM ----------
Looks like a soft brick stuck at mororola screen... If anyone else wants to try go ahead
jparasita said:
Wait guys do not flash this yet!
---------- Post added at 08:44 PM ---------- Previous post was at 08:42 PM ----------
Looks like a soft brick stuck at mororola screen... If anyone else wants to try go ahead
Click to expand...
Click to collapse
Well thank you for the heads up and I appreciate you taking one for the team to take the plunge. I was right about to flash this as well, but I am still waiting for it to download.
graymonkey44 said:
Well thank you for the heads up and I appreciate you taking one for the team to take the plunge. I was right about to flash this as well, but I am still waiting for it to download.
Click to expand...
Click to collapse
I am flashing the rooted image now hope it works.... Even waited 10 15 mins to see if it would boot I am no n00b to android but if anyone else wants to attempt I warned you kind of expected this and hope this is the next step for a bootloader unlock so we do not screw with image files.
---------- Post added at 09:05 PM ---------- Previous post was at 09:03 PM ----------
Ok just a heads up was able to restore phone with original rooted image file
yeah i think the problem may be with the xposed app_process. untill i get my linux all settup , @Ekkoria can just add the modified build prop with tethering to the file for now untill i figure out how to add xposed properly
I am going to watch this thread. I am happy with the turbo other than not being able to tether.
Thx for the development!

Need to Flash an S8 used on Straight Talk

A friend of mine gave me an S8 phone. Its reset and wiped clean. I was trying to set it up but it requires his old gmail account and password to get in to. The problem is, it won't take his password. He emailed google about it and he's waiting to see if they will recover his account on it. He won't be using the phone anymore as he has a new one. I'd like to use it as I have an S7 and this one has double the storage space that mine has.
If they can't recover his account, I want to flash the memory and start over. I've been a computer tech for 20 years so I know all about flashing the BIOS and how that can brick it. My question is, since I can't get into the system of the phone and see what the version of the firmware is, how confident can I rely on the back of the phone where it says SM-G950U? I've read that even though its branded that way on the back, it doesn't necessarily follow that it will show that in the system. I've downloaded the newest firmware I can find for it, SM-G950U_201910251442240_c0osvhilm6_fac from Updato and will use Odin to flash it with.
This was used on Straight Talk and has Tracfone branding on the startup.
FRP bypass for your device.
https://forum.xda-developers.com/galaxy-s8/how-to/method-sm-g892u-frp-bypass-bootloader-t3969869
Rmark1086 said:
FRP bypass for your device.
https://forum.xda-developers.com/galaxy-s8/how-to/method-sm-g892u-frp-bypass-bootloader-t3969869
Click to expand...
Click to collapse
Am I missing something. You say this is for his device. You linked s8 active stuff to a user that has a. 950u. This is not for his device. Luckily Odin don't allow flashing of wrong firmwares. You just bricked a guy's phone.
---------- Post added at 08:01 AM ---------- Previous post was at 07:59 AM ----------
txgeek53 said:
A friend of mine gave me an S8 phone. Its reset and wiped clean. I was trying to set it up but it requires his old gmail account and password to get in to. The problem is, it won't take his password. He emailed google about it and he's waiting to see if they will recover his account on it. He won't be using the phone anymore as he has a new one. I'd like to use it as I have an S7 and this one has double the storage space that mine has.
If they can't recover his account, I want to flash the memory and start over. I've been a computer tech for 20 years so I know all about flashing the BIOS and how that can brick it. My question is, since I can't get into the system of the phone and see what the version of the firmware is, how confident can I rely on the back of the phone where it says SM-G950U? I've read that even though its branded that way on the back, it doesn't necessarily follow that it will show that in the system. I've downloaded the newest firmware I can find for it, SM-G950U_201910251442240_c0osvhilm6_fac from Updato and will use Odin to flash it with.
This was used on Straight Talk and has Tracfone branding on the startup.
Click to expand...
Click to collapse
For you look for the revision 7 combination firmware. AMD your latest rev 7 stock firmware. Flash the combo factory reset within the combo system. Reboot download mode. And flash rev 7 firmware
---------- Post added at 08:45 AM ---------- Previous post was at 08:01 AM ----------
https://forum.xda-developers.com/galaxy-s8/how-to/g950u-snapdragon-bit-7-combination-t4025085
TheMadScientist said:
Am I missing something. You say this is for his device. You linked s8 active stuff to a user that has a. 950u. This is not for his device. Luckily Odin don't allow flashing of wrong firmwares. You just bricked a guy's phone.
---------- Post added at 08:01 AM ---------- Previous post was at 07:59 AM ----------
For you look for the revision 7 combination firmware. AMD your latest rev 7 stock firmware. Flash the combo factory reset within the combo system. Reboot download mode. And flash rev 7 firmware
---------- Post added at 08:45 AM ---------- Previous post was at 08:01 AM ----------
https://forum.xda-developers.com/galaxy-s8/how-to/g950u-snapdragon-bit-7-combination-t4025085
Click to expand...
Click to collapse
My mistake, I knew what phone he had I mean it's clearly written in the description. It looks like I posted the wrong link ACCIDENTLY. Nobody's phone was bricked. Well mistake made and valuable lesson learned. As far as the way you came at me questioning me if this is for guys device is pathetic to say the least. How you gonna ask that when it clearly says that. If this is what XDA is all about you know just read your response to my mistake, I won't be part of it. I'm about helping people and not smashing them when they make a mistake. Clearly you feel it's necessary to talk to people like that. What's that say about you?
Rmark1086 said:
My mistake, I knew what phone he had I mean it's clearly written in the description. It looks like I posted the wrong link ACCIDENTLY. Nobody's phone was bricked. Well mistake made and valuable lesson learned. As far as the way you came at me questioning me if this is for guys device is pathetic to say the least. How you gonna ask that when it clearly says that. If this is what XDA is all about you know just read your response to my mistake, I won't be part of it. I'm about helping people and not smashing them when they make a mistake. Clearly you feel it's necessary to talk to people like that. What's that say about you?
Click to expand...
Click to collapse
I wouldn't sweat it dude. Most everybody on the Samsung forums are as critical as can be. Ask the wrong question or give a different point of advice and they'll burn you faster than gasoline on paper. Most the complainers in here are the ones with the North American device, brick this brick that blah blah blah
---------- Post added at 10:10 AM ---------- Previous post was at 10:07 AM ----------
TheMadScientist said:
Am I missing something. You say this is for his device. You linked s8 active stuff to a user that has a. 950u. This is not for his device. Luckily Odin don't allow flashing of wrong firmwares. You just bricked a guy's phone.
You just come off as being a ****. Cool the Jets tuff guy
Click to expand...
Click to collapse
Rmark1086 said:
My mistake, I knew what phone he had I mean it's clearly written in the description. It looks like I posted the wrong link ACCIDENTLY. Nobody's phone was bricked. Well mistake made and valuable lesson learned. As far as the way you came at me questioning me if this is for guys device is pathetic to say the least. How you gonna ask that when it clearly says that. If this is what XDA is all about you know just read your response to my mistake, I won't be part of it. I'm about helping people and not smashing them when they make a mistake. Clearly you feel it's necessary to talk to people like that. What's that say about you?
Click to expand...
Click to collapse
thatsupnow said:
I wouldn't sweat it dude. Most everybody on the Samsung forums are as critical as can be. Ask the wrong question or give a different point of advice and they'll burn you faster than gasoline on paper. Most the complainers in here are the ones with the North American device, brick this brick that blah blah blah
Click to expand...
Click to collapse
Yea. I'm sorry. Back in the day we had guys come on in lg intentionally giving wrong info bricking guys for laughs. I do I get critical when I see stuff wrong.
Y'all most def right. I don't mean to and I take fault for being dickish. Again sorry man.
thatsupnow said:
Most of the complainers in here are the ones with the North American device, brick this brick that
Click to expand...
Click to collapse
You know I've been sitting here thinking about this. And it's TRUE 100% most of the bricks and bricking does happen on the locked us devices. Me myself even have a semi bricked one just sitting here to no avail of fixing hours and hours spent. They are a lot more finicky it seems than a unlocked bootloader ???
I'm sorry but I'm still having trouble getting this to work. I've tried the combo file and putting the extracted file in the AP section, and while that works, the phone just goes into a loop from the Factory Binary to that Settings screen and once its rebooted, it all starts again. What am I doing wrong? I've reset it to factory data several times.
Phone is an S8 64GB SM-G950U used on Straight Talk. Has Tracfone branding on screen when booted.
txgeek53 said:
I'm sorry but I'm still having trouble getting this to work. I've tried the combo file and putting the extracted file in the AP section, and while that works, the phone just goes into a loop from the Factory Binary to that Settings screen and once its rebooted, it all starts again. What am I doing wrong? I've reset it to factory data several times.
Phone is an S8 64GB SM-G950U used on Straight Talk. Has Tracfone branding on screen when booted.
Click to expand...
Click to collapse
You have to power off the device hold the vil down Bixby and power and flash the stock firmware in odin now.
TheMadScientist said:
You have to power off the device hold the vil down Bixby and power and flash the stock firmware in odin now.
Click to expand...
Click to collapse
Do you know which stock firmware is the correct version for this phone? Please post a link to where I can find it. Thanks.
txgeek53 said:
Do you know which stock firmware is the correct version for this phone? Please post a link to where I can find it. Thanks.
Click to expand...
Click to collapse
Which carrier will you be using it on? If its unlocked we can install any firmware us wise. If not we have to do u1 firmware or the original straight talk
---------- Post added at 03:10 PM ---------- Previous post was at 02:30 PM ----------
txgeek53 said:
Do you know which stock firmware is the correct version for this phone? Please post a link to where I can find it. Thanks.
Click to expand...
Click to collapse
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950U1/XAA/download/G950U1UES7DSL2/308046/
This is one of the latest bit 7 firmware. It is u1 unlocked carrier bloat free. This is what I use in mine. Sam mobile is slow. You can try internet download manager to speed it up a bit. But if your over seas or wanting non branded this is the way to go.
TheMadScientist said:
Which carrier will you be using it on? If its unlocked we can install any firmware us wise. If not we have to do u1 firmware or the original straight talk
---------- Post added at 03:10 PM ---------- Previous post was at 02:30 PM ----------
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950U1/XAA/download/G950U1UES7DSL2/308046/
This is one of the latest bit 7 firmware. It is u1 unlocked carrier bloat free. This is what I use in mine. Sam mobile is slow. You can try internet download manager to speed it up a bit. But if your over seas or wanting non branded this is the way to go.
Click to expand...
Click to collapse
Thanks. I'm in the US.
txgeek53 said:
Thanks. I'm in the US.
Click to expand...
Click to collapse
Just tried that one and it failed.
txgeek53 said:
Just tried that one and it failed.
Click to expand...
Click to collapse
Odin 3.13 modded
https://forum.xda-developers.com/attachment.php?attachmentid=4899843&d=1576128761
TheMadScientist said:
Odin 3.13 modded
https://forum.xda-developers.com/attachment.php?attachmentid=4899843&d=1576128761
Click to expand...
Click to collapse
Thank you so much!!! Using the modded Odin did the trick!
txgeek53 said:
Thank you so much!!! Using the modded Odin did the trick!
Click to expand...
Click to collapse
You should be good to go
TheMadScientist said:
Yea. I'm sorry. Back in the day we had guys come on in lg intentionally giving wrong info bricking guys for laughs. I do I get critical when I see stuff wrong.
Y'all most def right. I don't mean to and I take fault for being dickish. Again sorry man.
Click to expand...
Click to collapse
It's all good man. I couldn't believe I effed up like that. Thank God that didn't turn out bad. That day I had so many tabs open and was trying to finish it up before rushing off to work never checking the link I posted.
My apologies for the wrong link and coming at you the way I did. Water under the bridge.

Categories

Resources