Hi,
I have an SM-G900I and was wondering if anyone knows if I can flash SM-G900F firmware on it? Will it change the model number as well?
Also, does anyone know the difference between the 2 models apart from one being an Asian model and one being European?
Nope. You can't flash different models firmware, because it'll brick your device...
Isn't it effectively the same phone though?
gyrex said:
I have an SM-G900I and was wondering if anyone knows if I can flash SM-G900F firmware on it? Will it change the model number as well?
Also, does anyone know the difference between the 2 models apart from one being an Asian model and one being European?
Click to expand...
Click to collapse
Sure you can flash the 900F firmware. It isn't recommended and may "brick" (damage) your phone, making it as useful as a brick. You'd already know this if you had read any of the existing threads on the subject. But you can try anyway if you really want to. If you do, at least make the effort to locate the proper 900F PIT file and flash it concurrently. Your phone still won't work properly afterwards, but using the PIT file will make it less likely that you brick it due to partition corruption.
If you just want to change the displayed model number, you can do that by editing the build.prop file. The main difference between the two models is that they are intended for use in different regions and with different carriers and have different firmware. Therefore each will support different frequency bands.
Unfortunately you didn't tell us why you want to do this. If you are trying to use your phone on a different carrier that uses different frequencies, then trying to flash a 900F firmware won't do that. If you are looking for some 900F specific apps or features, you can probably do that by installing a 900F based custom ROM instead.
.
gyrex said:
Hi,
I have an SM-G900I and was wondering if anyone knows if I can flash SM-G900F firmware on it? Will it change the model number as well?
Also, does anyone know the difference between the 2 models apart from one being an Asian model and one being European?
Click to expand...
Click to collapse
Yes flash another firmware will change the model number accordingly
fffft said:
Sure you can flash the 900F firmware. It isn't recommended and may "brick" (damage) your phone, making it as useful as a brick. You'd already know this if you had read any of the existing threads on the subject. But you can try anyway if you really want to. If you do, at least make the effort to locate the proper 900F PIT file and flash it concurrently. Your phone still won't work properly afterwards, but using the PIT file will make it less likely that you brick it due to partition corruption.
If you just want to change the displayed model number, you can do that by editing the build.prop file. The main difference between the two models is that they are intended for use in different regions and with different carriers and have different firmware. Therefore each will support different frequency bands.
Unfortunately you didn't tell us why you want to do this. If you are trying to use your phone on a different carrier that uses different frequencies, then trying to flash a 900F firmware won't do that. If you are looking for some 900F specific apps or features, you can probably do that by installing a 900F based custom ROM instead.
.
Click to expand...
Click to collapse
Thanks for your comprehensive response!
The main reason for wanting to flash the SM-G900F firmware is because it seems like a more mainline branch and DBT/BTU will probably get more OTA frequent updates than XSA and i think issues would get resolved quicker in that branch...
vndnguyen said:
Yes flash another firmware will change the model number accordingly
Click to expand...
Click to collapse
Are you absolutely sure of this? Do you know anyone who has done this successfully?
gyrex said:
The main reason for wanting to flash the SM-G900F firmware is because it seems like a more mainline branch and DBT/BTU will probably get more OTA frequent updates than XSA and i think issues would get resolved quicker in that branch...
Click to expand...
Click to collapse
You could do that.. but NFC and sundry other features will fail on you. And any update involving the bootloader won't work for you. And probably ditto for any radio (modem) updates.
Your best bet to do what you want in my opinion is to install a 900F based custom ROM e.g. the Alliance ROM. The active custom ROM developers are proactive in updates and supporting their ROMs and would see the best result by you.
This approach would leave you with your stock 900l bootloader and radio. And 900F ROM, with updates for the ROM maintained by the ROM developer.
.
gyrex said:
Are you absolutely sure of this? Do you know anyone who has done this successfully?
Click to expand...
Click to collapse
When you flash the new firmware, the build.prop is replaced by a new one and the model number will be changed accordingly.
You can also manually change the model number by editing the build.prop file (ro.product.model), as fffft already pointed out.
Related
Hello,
as I am completely new to Samsung, I have got a question regarding the different basebands.
My S4 is running XXUAME2. New custom Roms are using different versions (for example XXUBMF4). and what is a CSC?
I couldn't find information if it is important to stay at the same baseband version, wher the differences between the basebands ar.
Can anybody please explain me?
Thank you!
JBrandtner said:
Hello,
as I am completely new to Samsung, I have got a question regarding the different basebands.
My S4 is running XXUAME2. New custom Roms are using different versions (for example XXUBMF4). and what is a CSC?
I couldn't find information if it is important to stay at the same baseband version, wher the differences between the basebands ar.
Can anybody please explain me?
Thank you!
Click to expand...
Click to collapse
I would also love to get the answer to this question +1
Thanks
Basebands are the same as the radio. They can improve your signal, and i some cases even affect other things like camera quality.
Newer basebands are nearly always better.
CSC is country code and you should try to find a code with your country
makhakz correct me if im wrong but csc's and modems are two different things altogether. my advice would be to leave csc alone as its allready set for you and just flash a different modem.
some modems may increase speed and connectivity others may improve these.
its a case of trial and error really as to which one works best for you
Is there anyway that I can install T-mobile firmware on my N9005 Galaxy Note 3? I tried to do it but it fails everytime. is there any way I can change my model number or something so I can install different firmwares from different variants? I ask this because I used to own a HTC One and I was able to change the model number so I could install different firmwares.
samanbabah said:
Is there anyway that I can install T-mobile firmware on my N9005 Galaxy Note 3? I tried to do it but it fails everytime. is there any way I can change my model number or something so I can install different firmwares from different variants? I ask this because I used to own a HTC One and I was able to change the model number so I could install different firmwares.
Click to expand...
Click to collapse
The better question is you have an international model so what is your goal? Are you trying to install a specific ROM to enable features (like modem frequencies) which have been disabled? You cannot install another model ROM on your device or you will just go into a boot loop or soft-brick your device and you will need to go through a recovery process. I'm going to assume you want to install a ROM for a specific feature or set of features which can be done but you simply need to ROOT and find a compatible ROM with the features you require.
Hope this helps!
cellrama said:
The better question is you have an international model so what is your goal? Are you trying to install a specific ROM to enable features (like modem frequencies) which have been disabled? You cannot install another model ROM on your device or you will just go into a boot loop or soft-brick your device and you will need to go through a recovery process. I'm going to assume you want to install a ROM for a specific feature or set of features which can be done but you simply need to ROOT and find a compatible ROM with the features you require.
Hope this helps!
Click to expand...
Click to collapse
yeah I was going to see if I would get LTE speeds if I'd installed the t-mobile firmware. also I want to be able to use Wifi calling as well. but the main reason I wanted to try out t-mobile firmware was, so I could get LTE speeds.
samanbabah said:
yeah I was going to see if I would get LTE speeds if I'd installed the t-mobile firmware. also I want to be able to use Wifi calling as well. but the main reason I wanted to try out t-mobile firmware was, so I could get LTE speeds.
Click to expand...
Click to collapse
Please refer to this post: http://forum.xda-developers.com/showthread.php?p=46653611#post46653611. You have posted a duplicate thread essentially asking the same information. I have provided a link which once viewed and completed should hopefully solve your issue. If not, respond to that thread and I'll help where possible. Thanks!
I've been having a problem on my S5 where the data symbol is stuck on 4G and doesn't show anything else. It might be a baseband/modem error since I'm using a Canadian model in Cyprus. Can I use the modem from the Cyprus G900F firmware and flash it on my G900W8? Also can someone explain how I could do that so that I don't screw it up, if it is possible?
!
RE UP!
Same pb...
To flash a modem you need a .bin file and odin.
Clear your delvik/cache,
put your phone in download mode,
load phone with the .bin file and flash it.
I also am having data issues with all custom ROM's. If it's not one thing it's another. Canadian phones always get left in the dust it seems.
vasodys said:
Can I use the modem from the Cyprus G900F firmware and flash it on my G900W8?
Click to expand...
Click to collapse
Probably not. You neglected to tell us what your W8 baseband and firmware are, which is rather crucial information. Making it impossible to give you a definitive answer. In most cases Odin will refuse to allow the change.
That isn't really an issue most of the time. There should be a variety of W8 modems for you to choose from if you want to change your modem.
.
i have g900t i want to flash on it g900w8 rom(for hebrew language)
but the baseband need stay on g900t
look the result
how
someone can help me get into this sulution?
edvin26 said:
someone can help me get into this sulution?
Click to expand...
Click to collapse
Hey have you figured this out yet... I'm in sort of same situation I have a Sm-g900t but it's running a G900M stock rom, so I need to know how to keep my bootloader & modem and just flash a stock unbranded rom. I know I can flash custom roms through recovery but I want a stock to fall back on
*GALAXY S5*
edvin26 said:
someone can help me get into this sulution?
Click to expand...
Click to collapse
It's not clear what you hope to do. What you wrote is that you wanted to change you ROM to W8 while retaining your TMobile baseband. And your photo shows that you did just that.
But reading between the lines suggests that you were surprised to see that the baseband hadn't changed and are actually seeking the opposite of what you asked. You need to clarify your intent.
The result that you have is the expected situation. The baseband normally won't change, nor does it represent a problem. Your phone should work fine with the W8 ROM paired with the original baseband.
Aside from the fact that there is usually no need to change the baseband, how easy it is to do so depends on the carrier and how they sign their firmware. Odin won't change the baseband if the carrier decided to omit the requisite permission to do so. TMobile modems are invariably compatible with Canadian (W8) carriers, so pragmaticaly the easiest way to update a 900T modem, if you have a rationale for doing so, is to install a TMobile update. Then put the W8 ROM on top of that if you so wish.
.
Hi All
As the title says. Can I flash an LTE-A version with UK firmware?
Many thanks.
andybg40 said:
Hi All
As the title says. Can I flash an LTE-A version with UK firmware?
Many thanks.
Click to expand...
Click to collapse
what do you mean by LTE-A?? do you mean the model SM-G900F ??
if yes well you can flash uk firmware.
hope that I helped
Galaxy_Guy said:
what do you mean by LTE-A?? do you mean the model SM-G900F ??
if yes well you can flash uk firmware.
hope that I helped
Click to expand...
Click to collapse
I have the SM-G906K version of the prime device, is that still doable?
andybg40 said:
I have the SM-G906K version of the prime device, is that still doable?
Click to expand...
Click to collapse
I wouldn`t risk flashing firmware that`s designed for a different device model, in this case the G900F firmware on a G906K.
andybg40 said:
Can I flash an LTE-A version with UK firmware?
Click to expand...
Click to collapse
There isn't a lot of reliable information about your model so there is no authorative answer.
Most will say that it's risky and not recommended to flash a firmware from another variant. As well, you don't simply have a different variant of the 801 Snapdragon based S5. You have a derivative model, with a different processor (805), screen resolution, et cetera. Strongly arguing that it is highly unlikely to work and would likely brick your phone.
The best you might hope for is someone alleging that they were able to do so. And then you'd still need to estimate the credibility of such a report.
If you have root and a custom recovery installed, you could remove much of the risk by trying a 900F based custom ROM, e.g. the Phoenix ROM, rather than flash stock 900F firmware. All in all though, it's an improbable fit.
.
fffft said:
There isn't a lot of reliable information about your model so there is no authorative answer.
Most will say that it's risky and not recommended to flash a firmware from another variant. As well, you don't simply have a different variant of the 801 Snapdragon based S5. You have a derivative model, with a different processor (805), screen resolution, et cetera. Strongly arguing that it is highly unlikely to work and would likely brick your phone.
The best you might hope for is someone alleging that they were able to do so. And then you'd still need to estimate the credibility of such a report.
If you have root and a custom recovery installed, you could remove much of the risk by trying a 900F based custom ROM, e.g. the Phoenix ROM, rather than flash stock 900F firmware. All in all though, it's an improbable fit.
.
Click to expand...
Click to collapse
Thanks for your help guys.
Yep, I imported this model for the specs. It's not a real drama on the stock firmware tbh. I just wanted to remove the splash screen and network installed apps from Korea.
I've hidden the apps, but there are still a couple of Korean bits and pieces I would like to get rid of. Maybe a firmware or suitable rom will become available soon.
No, u can't use the SM-G900F firmware on the SM-G906K