Database Users

I need RS-x-xx.bin file. Please share.

Hi
I need to fix my broken XDA. I will try to write the RADIO DUMP file RS-x-xx.bin directly into the flash memory. Just because I can;t find another device to read the file from it I ask all friends in the forum to help me.
This file can be obtained using XDA manipulator with a serial cable ( usb not work ) with the device in the bootstrap mode and by pressing CTRL+R.
This will dump all radio flash memory to a file.
Hope the format will be the same as the one in the flash memory is.
If the operation will fail, I will let you know. If succes, I will ofer my services to repair all devices from 1% error RSU which cannot be fixed trough the steps descibed in the forum.
Thanks in advance.
Silviu C.

Me too :lol:
Could somebody please help us here?

Nah, I don't know...
I have such a file, but I'm reluctant to give it to you. Here's why:
The radio ROM contains the software needed to make the GSM work. It also contains what is called 'calibration data'. More and more radios, such as the one in the XDA, have no more tiny knobs to twist on the inside. Instead, all the tuning is done in the factory, and the data on where these virtual knobs should be set is stored in a special spot in the ROM.
The update files that come with the Programme B upgrade package only contain certain regions of the ROM that need to be written to in order for the device to be upgraded. The format of these files is understood (ask Itsme or W4XY for help if needed), and IMHO these files are a much better starting point than a straight 4MB dump of all ROM. Whatever sorry state the unit may be in with this whole 1% business, restoring the entire ROM from another unit is a sure way to make certain the unit can never be repaired.

Peter Poelman: Thanks for the kind reply.
I understand your point, but could you please give us some idea how to solve our problems with this 1% business. As you might have noticed that we have tried all posible options/ suggestions there is in this forum.
. In my case, the GSM ROM is broken after I accidentally left the GSM 1900 option checked on after upgrading to TMobile RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).
Your suggestions would be highly appreciated....
-------
Andhy

Copy files from ROM ?

Hi,
I'm trying to get around the problem of the quiet sound with the AT&T rom, I have another XDA running the latest T-Mo rom and was hoping to mess around with some dll's from the TMo rom to see if I could sort the problem, but the drivers used for the sound are protected somehow in the rom, so it won't let me copy them to my SD card or PC (which means I can't try it on the AT&T rom)
Is there any way of copying these files out ? and then into the AT&T rom ??
Cheers
Neil

see dumprom

No good for me then, I only have Windows Machines here..

Ok, I have thought of a possible work around, but I need someone with the T-Mobile WM2003 Rom (Pref 4.01.16) & Linux/Unix to copy the wavedev.dll & waveapi.dll from the \Windows folder and send them to me so it can try it out..
I'm sure its not only me that this "feature" annoys. it makes Tomtom especially useless on the voice prompt side of things.
Cheers
Neil

?? I don't see the problem, dumprom is a windows tool.
in case you had not found it yet, I added the link to the binary to the wiki page.

Ah right, excellent.
Sorry I assumed it was the same as the makerom tool which states its unix/linux.
-=edit=- I just tried the link on the dumprom wiki page, and get the dreaded 404 error
Thanks
Neil

oeps. a common wiki error, I forgot to '~'-escape the '~' in the url.

Thanks mate, it seems to be working now
I'll have a play about with it when I get home.
Cheers
Neil

Back again :lol:
The dumprom app crashes (tried on two machines) when I try to execute it. I have tried it with various command line configuations but the little windows xp error box pops up saying that the program must be closed

dumprom crash
Hi Swifty
Yeah I got this too - until I realised that I was the problem. I was omitting the myrom.nb1 filename (or whatever you have called yours) from the command line! D'Oh! What is your exact command line that you use?

it is known to be buggy and crash on certain roms.
I am working on an improved version in perl - dumpxip.pl
but it does not extract files stored as 'xip' yet.

:lol:
Silly me I done the same thing as you and omitted the rom file.. thanks
I have now extracted the AT&T and TMobile roms and compared the files, the AT&T's wavedev.dll is larger in size, I think this is where the modifications were made.. but I can't rebuild the TMo version into the AT&T rom because I don't use linux
Hopefully someone can help me out and we will finally have a perfect WM2003 Rom -=edit=- IF it works :lol: :roll:
Cheers
Neil

Carefull!
i fearbthat just swapping in the new dll may not help... it may have other dependancies that also need changing. The interface / entry points may also have changed and you may need a whole slew of other stuff and some other registry settings too. But pls go ahead and try... let us know!

Carefull!
i fearbthat just swapping in the new dll may not help... it may have other dependancies that also need changing. The interface / entry points may also have changed and you may need a whole slew of other stuff and some other registry settings too. But pls go ahead and try... let us know!

Swifty said:
:lol:
Silly me I done the same thing as you and omitted the rom file.. thanks
I have now extracted the AT&T and TMobile roms and compared the files, the AT&T's wavedev.dll is larger in size, I think this is where the modifications were made.. but I can't rebuild the TMo version into the AT&T rom because I don't use linux
Hopefully someone can help me out and we will finally have a perfect WM2003 Rom -=edit=- IF it works :lol: :roll:
Cheers
Neil
Click to expand...
Click to collapse
Neil,
Use CYGWIN it's an excellent "Linux running as a command line in Windows" environment. It's easy to install, start and run commands. It comes up as a DOS box-like interface and Voila! You have Linux, stable, clean and fast, including the ability to build ROMs.

wm2003 4.01.12 deleted my files?

after installed it on my t-mobile mda n' passed several difficult trouble on radiostack, this os such a great thing that i expect to figure on my pda. but, later i realized that the os didn't fit my expectation when its began to erase my files on the sdcard 'misteriously'.
a thing that make me become so so bad, the size of files doesn't match with the used area on the card, what kind of trouble is this? they erased my files but the space didn't change..
is there any idea to get my files back before i'm goin' to format it?
how to avoid it in the future?
thx for read it..

The only way to avoid it is to write protect the memory card by moving the slider switch to lock position.

slider switch...
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.

Re: slider switch...
cep said:
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.
Click to expand...
Click to collapse
Only SDCard has a write protect slider, and U'r using MMC not SDCard.
I have a same problem before, my SDCard erased, it happened twice, and I run the SD_Fix registry file, since 2 months this problem never happen any more.

How do I run this file?
Thanks

I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!

How to Run SD_fix.reg
sonie_vespie said:
I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!
Click to expand...
Click to collapse
just copy the .reg file to your PPC and run it. CMIIW...

Re: How to Run SD_fix.reg
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".

Re: How to Run SD_fix.reg
Deke Martin said:
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".
Click to expand...
Click to collapse
Sorry, I forgot to advise you to install Registry Editor Program on your PPC first. (e.g. PHM Reg edit)

hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all

Unfortunately, it doesn't work w­ell, after running that file, i installed two programs on storage card (HandMap and E-dictionary). Then I tried to soft reset and my MMc card was erased. oh, what can i do now ?

sonie_vespie said:
hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all
Click to expand...
Click to collapse
I don’t know exactly what the problem is, if another one who had the same prob and been solved please share how to solve this.
Sorry sonie_vespie I can’t help you better than I did.

Where is the SD_fix.reg file
Hi,
How can I get the SD_fix.reg file? Thanks

hi,
the file is above
I think that the .reg file is exported form a key in REGISTRY, but when i run it, it isn't imported to the defined key exactly so the card is still erased
Help me, thanks 'coz i like the 4.01.16 of T-Mobile

hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now

sonie_vespie said:
hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now
Click to expand...
Click to collapse
I glad to hear that, good luck than..

hi,
Many thanks for your help, darma
hope we have chance to share our xp
best regards,

tomtom7 and file *.bif

Hello everyone!!!
Someone can load in this post the file *.bif that generate tomtom7 on htc diamond?
I am carrying out tests to enable mapshare in all PDA.
Thank you!!!

great stuff! tried everything but still cant connect to tth2.
why .bif file? from everything i read, u can delete the file & it will regenerate if u reopen tt7.

wanwarlock said:
great stuff! tried everything but still cant connect to tth2.
why .bif file? from everything i read, u can delete the file & it will regenerate if u reopen tt7.
Click to expand...
Click to collapse
The file *. bif is responsible for home-tomtom tell what our ID device and what kind of device we have. I have rewritten this file by saying that my device is a tomtom-go, and I have access to everything except mapshare because it generates an error between my account and ID device. I therefore believe that the key might be there.
Greetings ...

KALI2000 said:
Hello everyone!!!
Someone can load in this post the file *.bif that generate tomtom7 on htc diamond?
I am carrying out tests to enable mapshare in all PDA.
Thank you!!!
Click to expand...
Click to collapse
I need the file *.bif which is in htc diamond to continue my research.
Thanks in advance.

Info *.bif
Hi,
Find this file after installing tt7, to proceed with the approval of the maps you have to copy this file to your PC open with notepad and copy the device unique id that you will need for the procedure.
Bye.

lele.d said:
Hi,
Find this file after installing tt7, to proceed with the approval of the maps you have to copy this file to your PC open with notepad and copy the device unique id that you will need for the procedure.
Bye.
Click to expand...
Click to collapse
Yes, but my device is a htc universal, therefore does not generate the same file bif that generates a htc diamond. That's why I need to file bif generated htc diamond after run tt7. I try to deceive tomtom home with this procedure.
So, someone solidarity to load this file in this post, please.
Thank you.
PD. I need the file UserPatch.dat after run tt7 too.

*.bif and UserPatch.dat on tt7
Hello everyone!!!
Someone can load in this post the file *.bif and UserPatch.dat that generate htc diamond after run tomtom7?
I need those files for study.
Thank you!!!

RE Info
Hi,
You do not need the file bif of diamond if tt7 install on the memory card you'll see that you create the file ttnavigator.bif that is unique to each device.
Each file .Bif has a deviceunique id differently depending on the ppc which uses.
Sorry for ma bad english, I hope you have understood what I wanted to explain.
Lele.

lele.d said:
Hi,
You do not need the file bif of diamond if tt7 install on the memory card you'll see that you create the file ttnavigator.bif that is unique to each device.
Each file .Bif has a deviceunique id differently depending on the ppc which uses.
Sorry for ma bad english, I hope you have understood what I wanted to explain.
Lele.
Click to expand...
Click to collapse
That's why I need specifically files created in a htc diamond, because they are unique.

anyone can help me?

KALI2000 said:
Hello everyone!!!
Someone can load in this post the file *.bif and UserPatch.dat that generate htc diamond after run tomtom7?
I need those files for study.
Thank you!!!
Click to expand...
Click to collapse
Anyone can help me?

edited.....

On a dutch forum there's someone that has mapshare working on his HTC Universal.
They posted a list of compatible devices and also a tutorial how to connect with mapshare. Maybe is that tutorial working for you?
Do you want me to post it??
P.S. I'm dutch, sorry for my english.

rorydaredkign said:
Thats called Warez my friend.
NO WAREZ
Im not some tell-tale who goes running to mods, but just stop asking and edit your post to reflect the fact that you understand youre wrong, before you get banned.
Rory
Click to expand...
Click to collapse
WAREZ?
What are you talking about?
I need those files for study.
Emulating a complete ROM it is warez and I have certain that you are using any ROM that isn´t official.
Greetings.

edited....
sorry for the misunderstanding

rorydaredkign said:
edited....
sorry for the misunderstanding
Click to expand...
Click to collapse
I haven´t any problem....

KALI2000 said:
Hello everyone!!!
Someone can load in this post the file *.bif and UserPatch.dat that generate htc diamond after run tomtom7?
I need those files for study.
Thank you!!!
Click to expand...
Click to collapse
Help me please!!!

Snickers123 said:
On a dutch forum there's someone that has mapshare working on his HTC Universal.
They posted a list of compatible devices and also a tutorial how to connect with mapshare. Maybe is that tutorial working for you?
Do you want me to post it??
P.S. I'm dutch, sorry for my english.
Click to expand...
Click to collapse
What is the link for this forum or post?

It is in dutch so maybe you can't read it. It is located here:
http://gathering.tweakers.net/forum/view_message/30308552
For english people i converted it to english.
1. Open TomTom Navigator 7 on your PDA
2. Go to Map corrections -> Correction preferences and select all but "corrections reported by some.
3. Close TomTom Navigator on your PDA and TomTom Home on your computer
4. Move the map navigator that's on the PDA (In the my device folder, i think) to program files.
Now it is program files\navigator
5. Remove the following files out of all your folders: "SeverLineIdndex.dat" "ServerNameIndex.dat"
They weren't there on my PDA
6. Remove ttnavigator.bif from your sd-card
7. COnnect your PDA to your computer and make an activesync-connection
8. Start TomTom Home 2.3
9. Connect to your TomTom-account
10. TomTom Home gives you 2 options. Connect to your Pda or Sd-card. Choose Sd-card.
11. When you get an error meessage klick on back.
12. Now you can see your mapshare updates!
It should work with the following devices:
IPAQHW65
IPAQHW67
IPAQHW69
IPAQRX57
IPAQRX59
IPAQRX42
IPAQRX45
ARTE10000
HTC-ARTEMIS
TRIN100
HTC-TRINITY
ATHE100
HTC-ATHENA
KAIS10000
HTC-KAISER
POLA10000
HTC-POLARIS
SEDN10000
HTC-NIKI
HTC-SEDNA
PHAR10000
HTC-PHAROS
OMNI10000
HTC-OMNI
WING20000
HTC-WINGS
DIAM10000
HTC-DIAMOND
RAPH10000
HTC-RAPHAEL
PLAT10000
HTC-PLATINUM
But this is only a solution for this devices. I hope someone can get a solution for all devices. I hope you can succeed with the .bif file!

Why do you need these files?
If it is in support of somthing relates to a WAREZ project then you are in the wrong site my friend.

In need o a little assistence.

Hello,
It's already a long time ago since i needed a Dutch ROM for the HP 6xx series, i can't ind this anywhere but now i finally have a Dutch device.
so now i heard something about ROM Dumping, i also understood that this has something to do with pdocread.
but as the rookie ( maybe even ''noob'' ) that i am, i want to ask the following question, how do i dump my dutch rom, what programs do i have to use or that, and is installing a Dutch rom the same thing as flashing it to your device? or do i have to convert files to .dio format?
all help is welcome!
post scriptum,
i got the 614 in every language available right now, so if you do me the favour for guiding me through this dumping, ill upload all the ROMS of any language you want, i got almost every language.
sincerley, alex

ok, i used DUMP TOOLS now and in the ''manual''of dump tools
it says i have to copy dump_gene_os_extrom.exe
to my device, i did this.
it also said that i needed a minimum of 70MB.
after like 5 minutes the device copied data to the storage card
im using a 1 gb micro SD of kingston.
now, it already copied 716mb on the SD card and growing.
i cant imagine a rom any bigger then like 120MB.
i tried alot of things so could someone please help me?
im willing to donate if anybody wants money for their time, no problem.

you are not using the correct dump tool, there is specific dump tool for 61x here. You need to connect to computer with activesync to use it

keyx said:
you are not using the correct dump tool, there is specific dump tool for 61x here. You need to connect to computer with activesync to use it
Click to expand...
Click to collapse
Thank you very much for this, it really helped me, i retreived the following files now from my device :
- diskimage_Ver.nb0
- part2.nb0.payload
- part2.nb0.payload.part1
- part02.raw
the files standing above, are the files that where retreived from my Dutch hp 614, now i want this rom, on my other 614 that ain't Dutch.
i already tried to rename the diskimage_Ver.nb0 to > flash.dio, then flashed that file into my 614, after that whas done it got stuck at the startup screen.
so is anybody prepared to help me out and tell me how i can get it to work.
P.S. for the ones that are going to link me to the thread where someone links to a Dutch ROM, that one doesnt work, it doesnt go any further then the start up screen.
if there's people that want money for their help thats absolutely no problem.
i just want my pda restored and dutch.
thank you in advance.

that is weird...it should work
anyway can you flash custom rom like my 6.5 or sergiorus 6.1 without problem?
also post your result from executing this command when your device is running a working rom:
pdocread -l
and
pdocread -t